This reverts commit b65f813c1a.
As a side effect this also seems to fix wtap which seems to have
lost the epoch over the input path in between.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
extra is used in a commented-out expression to compute
scan_service_time. Use #if 0 instead of a comment for the disabled
scan_service_time expression and move the unused computation of extra
under the same #if.
iwnstats was not compiling because of some issues raised by the clang
compiler due to -Werror. As a tool it is not connected to world build.
Add missing field "barker_mrc" initialization in struct
iwn_sensitivity_limits for -Wmissing-field-initializers, remove unused
pointer *is on iwn_stats_*_print functions and unused variables for
-Wunused-parameter and -Wunused-variable.
The value for field "barker_mrc" of struct iwn2030_sensitivity_limits
was obtained from linux 3.2 wireless/iwlwifi driver code (iwl-2000.c:115
.barker_corr_th_min_mrc = 390).
Also set BINDIR in Makefile to make it possible to install under
/usr/local/sbin/iwnstats as it require super user.
Reviewed by: adrian
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D29800
net80211 changed a while back to support per-VAP config for things
rather than it being global. This is to support firmware NICs that
support per-VAP flags and configuration where the firmware will figure
out how to combine them.
However, it introduced a fun timing issue - those changes used to happen
to the shared ic state before newstate() was called, but now they're
also tasks and they can happen /after/.
This isn't a problem for ath(4), but it exposed some interesting
timing and config bugs here. Notably, I saw short slot NOT being
configured in 5GHz mode during some associations, so 5GHz stuff
would hang or behave poorly. Other times the follow-up auth has
the right config, so it didn't hang.
So for now, just flip this over to using the per-VAP flags which
are correct when newstate() is called. net80211 should also have
those flags synch'ed to the global ic state before newstate() runs
and that can come in a subsequent commit.
Whilst here also fix plcp to be consistently logged as a hex value.
Tested:
* iwn(4) Intel 6205, STA mode, both 2GHz and 5GHz
Differential Revision: https://reviews.freebsd.org/D29379
Reviewed by: bz
We have (two versions) of MS() and SM() macros which we use throughout
the wireless code. Change all but three places (ath_hal, rtwn, and rsu)
to the newly provided _IEEE80211_MASKSHIFT() and _IEEE80211_SHIFTMASK()
macros. Also change one internal case using both _S and _M instead of
just _S away from _M (one of the reasons rtwn and rsu were not changed).
This was done semi-mechanically. No functional changes intended.
Requested by: gnn (D26091)
Reviewed by: adrian (pre line wrap)
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC (d/b/a "Netgate")
Differential Revision: https://reviews.freebsd.org/D26539
In r178354 with the introduction of multi-bss ("vap") support factoring
out started and with r193340 ieee80211_media_change() no longer returned
ENETRESET but only 0 or error.
As ieee80211(9) tells the ieee80211_media_change() function should not
be called directly but is registered with ieee80211_vap_attach() instead.
Some drivers have not been fully converted. After fixing the return
checking some of these functions were simply wrappers between
ieee80211_vap_attach() and ieee80211_media_change(), so remove the extra
function, where possible as well.
PR: 248955
Submitted by: Tong Zhang (ztong0001 gmail.com) (original)
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
These are from the linux iwlwifi driver ;the default use smaller
maximum AMPDUs (8k) and a much smaller density (none.) The latter
could cause stability issues.
Tested:
* Tested on Intel 6300, STA mode.
Differential Revision: https://reviews.freebsd.org/D25113
Make sure all occurrences of ieee80211_input_xxx() in sys/dev are
covered by a network epoch section. Do not depend on the interrupt
handler nor any taskqueues being in a network epoch section.
This patch should unbreak the PCI WLAN drivers after r357004.
Pointy hat: glebius@
Sponsored by: Mellanox Technologies
- Alignment issues:
* Add missing __packed attributes + padding across all drivers; in
most places there was an assumption that padding will be always
minimally suitable; in few places - e.g., in urtw(4) / rtwn(4) -
padding was just missing.
* Add __aligned(8) attribute for all Rx radiotap headers since they can
contain 64-bit TSF timestamp; it cannot appear in Tx radiotap headers, so
just drop the attribute here. Refresh ieee80211_radiotap(9) man page
accordingly.
- Since net80211 automatically updates channel frequency / flags in
ieee80211_radiotap_chan_change() drop duplicate setup for these fields
in drivers.
Tested with Netgear WG111 v3 (urtw(4)), STA mode.
MFC after: 2 weeks
There are few places in interrupt handler where the driver
lock is dropped; ensure that device is still running before
processing remaining ring entries.
PR: 192641
MFC after: 5 days
Generic Tx stats fixes:
- do not try to parse "aggregation status" for single frames; send them
to iwn_tx_done() instead;
- try to attach mbuf / node reference pair to reported BA events;
allows to fix reported status for ieee80211_tx_complete() and ifnet counters
(previously all A-MPDU frames were counted as failed - see PR 210211);
requires few more firmware bug workarounds;
- preserve short / long retry counters for wlan_amrr(4)
(disabled for now - causes significant performance degradation).
- Add new IWN_DEBUG_AMPDU debug category.
- Add one more check into iwn_tx_data() to prevent aggregation ring
overflow.
- Workaround 'seqno % 256' != 'current Tx slot' case (until D9195 is not
in the tree).
- Improve watchdog timer updates (previously watchdog check was omitted
when at least one frame was transmitted).
- Stop Tx when memory leak in currently used ring was detected (unlikely
to happen).
- Few other minor fixes.
Was previously tested with:
- Intel 6205, STA mode (Tx aggregation behaves much better now).
- Intel 4965AGN, STA mode (still unstable).
PR: 192641, 210211
Reviewed by: adrian, dhw
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D10728
This removes the direct WME info access in the ieee80211com struct and instead
provides a method of fetching the data. Right now it's a no-op but eventually
it'll turn into a per-VAP method for drivers that support it (eg iwn, iwm,
upcoming ath10k work) as things like p2p support require this kind of behaviour.
Tested:
* ath(4), STA and AP mode
TODO:
* yes, this is slightly stack size-y, but it is an important first step
to get drivers migrated over to a sensible WME API. A lot of per-phy things
need to be converted to per-VAP before P2P, 11ac firmware, etc stuff shows up.
1) They are using wrong tag (Tx) + map (Rx) combination.
2) Rx descriptor is already synchronized in iwn_notif_intr()
3) It's not needed for transmitted data since device does not change
mbuf contents.
Tested with Intel 6205 (amd64), STA mode.
Some code was additionally moved for (future) lock splitting.
Tested with Intel 6205, STA mode.
Differential Revision: https://reviews.freebsd.org/D10106
Do not try to use errno(2) codes here; instead, just return unique
value (1) when radio is disabled via hardware switch and another
one (-1) for any other error in initialization path.
Tested with Intel 6205, STA mode.
For 4965 just extract 'is_chan_5ghz' flag from the RXON structure
(like it was done in r281287); for others it was never used.
Tested with Intel 6205, STA mode.
directly from the node.
- Use ni_txparms directly instead of calculating them manually every time
- Move M_EAPOL flag check upper; otherwise it may be skipped due to
'ucastrate' / 'mcastrate' check
- Use 'mgtrate' for control frames too (see ifconfig(8), mgtrate parameter)
- Add few more M_EAPOL checks where it was missing (zyd(4), ural(4),
urtw(4))
- Few unrelated cleanups
Tested with:
- Intel 6205 (iwn(4)), STA mode;
- WUSB54GC (rum(4)), HOSTAP mode + RTL8188EU (rtwn(4)), STA mode.
Reviewed by: adrian
Differential Revision: https://reviews.freebsd.org/D9811
- Check return code from initialization path; otherwise, vap state
may be wrong after an error.
- Do not try to run iwn_stop() / iwn_init() multiple times.
- Merge iwn_radio_on/off() and move RFKILL bit check into the task.
- Try to handle possible RF switch state change in S3 state (PR 181694).
PR: 181694
Reviewed by: adrian
Differential Revision: https://reviews.freebsd.org/D9797
* Migrate the rx_params stuff out from ieee80211_freebsd.h where it doesn't belong -
this isn't freebsd specific anymore.
* Don't use a hard-coded number of chains in the ioctl header; now we can shuffle
MAX_CHAINS around so it can be used in the right spot.
* Extend the signal/noisefloor levels in the mimo stats struct to userland to include
the signal and noisefloor levels for each 20MHz slice of a 160MHz channel.
* Bump the number of EVM pilots in preparation for 4x4 and 160MHz channels.
Tested:
* ath(4), STA mode
* iwn(4), STA mode
* local ath10k port, STA mode
TODO:
* 11ax chips will come with 5GHz 8x8 hardware for lots of MU-MIMO - I'll re-bump it
at that point.
Note:
* This breaks the driver and ifconfig ABI; please recompile the kernel,
ifconfig and wpa_supplicant/hostapd.
BUS_DMASYNC_PREREAD is required when setting up RX buffer, otherwise
data provided by card can be overwritten by data evicted from cache
Also use proper tag when setting up RX descriptor
Reviewed by: adrian, avos, ivadasz
Differential Revision: https://reviews.freebsd.org/D8717
Replace various void * / int argument combinations with common structures:
- ieee80211_ratectl_tx_status for *_tx_complete();
- ieee80211_ratectl_tx_stats for *_tx_update();
While here, improve amrr_tx_update() for a bit:
1. In case, if receiver is not known (typical for Ralink USB drivers),
refresh Tx rate for all nodes on the interface.
2. There was a misuse:
- otus(4) sends non-decreasing counters (as originally intended);
- but ural(4), rum(4) and run(4) are using 'read & clear' registers
to obtain statistics for some period of time (and those 'last period'
values are used as arguments for tx_update()). If arguments are not big
enough, they are just discarded after the next call.
Fix: move counting into *_tx_update()
(now otus(4) will zero out all node counters after every tx_update() call)
Tested with:
- Intel 3945BG (wpi(4)), STA mode.
- WUSB54GC (rum(4)), STA / HOSTAP mode.
- RTL8188EU (urtwn(4)), STA mode.
Reviewed by: adrian
Differential Revision: https://reviews.freebsd.org/D8037
