In several places, a loop tests for powers of two, or iterates through
powers of two. In those places, replace the loop with an invocation
of fls or ilog2 without changing the meaning of the code.
Reviewed by: alc, markj, kib, np, erj, avg (previous version)
Differential Revision: https://reviews.freebsd.org/D45494
When this driver was written it made sense to make this default to off,
but these days almost all BIOSses will do the right thing. Furthermore
non-mmio communication only works on Intel architectures.
So lets default to allowing mmio, but not change the semantics of the
AHC_ALLOW_MEMIO flag to not break existing installs. Also document the
already existing hint.ahc.<unit>.allow_memio.
Signed-off-by: HP van Braam <hp@tmm.cx>
Reviewed by: imp (small style tweak)
Pull Request: https://github.com/freebsd/freebsd-src/pull/1219
Previously it was only possible to enable target mode for these drivers
by rebuilding the kernel with AHC_TMODE_ENABLE or AHD_TMODE_ENABLE and a
bitmask of which units to statically enable for target mode.
There is no space-savings in the driver by not having AHC_TMODE_ENABLE
set, so in addition to the compile time option lets also introduce some
tunables:
hint.ahc.<unit>.tmode_enable=0/1
hint.ahd.<unit>.tmode_enable=0/1
For compatibility the old behavior is retained, but it can be overridden
with tunables
Signed-off-by: HP van Braam <hp@tmm.cx>
Reviewed by: imp, mav
Pull Request: https://github.com/freebsd/freebsd-src/pull/1208
aicasm just puts the value of the "-i" passed include file in the
generated file with quotes around it. This means that there are manual
edits made to aic7xxx_reg_print.c and aic79xx_reg_print.c
now we check to see if the value passed to '-i' starts with a '<', if it
does don't output the quotes.
Signed-off-by: HP van Braam <hp@tmm.cx>
Reviewed by: imp (minor code simplification)
Pull Request: https://github.com/freebsd/freebsd-src/pull/1209
When disabling a lun there can still be outstanding AIOs and INOTs, when
this happens previously the lun would just fail to disable and trying to
re-use the lun would break the card.
isp(4) in target mode does the same thing when disabling a lun, in
testing this allows re-starting of ctld(8) with connected initiators and
allows initiators to gracefully resume afterwards.
Signed-off-by: HP van Braam <hp@tmm.cx>
Reviewed by: imp, mav
Pull Request: https://github.com/freebsd/freebsd-src/pull/1190
Linux removed theirs starting in 2018 in commit:
"scsi: aic7xxx: Fix build using bare-metal toolchain"
Also remove now-useless sys/cdefs.h includes
Signed-off-by: HP van Braam <hp@tmm.cx>
Reviewed by: imp, mav, emaste
Pull Request: https://github.com/freebsd/freebsd-src/pull/1189
One of the comments in ahc_execute_scb() notes that the CAM direction is
actually w.r.t. the initiator. As a consequence, all of our sync ops
end up being wrong because the direction is flipped from that of the
transfer. Fix it to do proper invalidation and avoid spewing random
garbage out on the SCSI bus.
Reported and tested by: HP van Braam <hp@tmm.cx>
Reviewed by: imp, mav
Differential Revision: https://reviews.freebsd.org/D44860
In ahc_init(), qoutfifo is already assigned to effectively the same
value a couple lines up, except in the first assignment it uses the
proper definition; keep the more descriptive assignment.
ahc_targetcmd_offset() gets the offset wrong entirely; as per the
area of ahc_init() this diff also touches, targetcmds is laid out first
in the shared map and it's followed by the qoutfifo. As a result, we'd
generally be getting negative offsets here. We can't actually do a
partial sync anyways, so there was no consequence to getting this wrong.
Reviewed by: imp, mav
Differential Revision: https://reviews.freebsd.org/D44859
After 5e63cdb457 the drivers didn't clear CAM_DIS_DISCONNECT in
ah*_handle_target_cmd() when needed, only set it.
Reported/tested by: HP van Braam <hp@tmm.cx>
MFC after: 1 week
In most cases, usage does not return, so mark them as __dead2. For the
cases where they do return, they have not been marked __dead2.
Reviewed by: imp
Pull Request: https://github.com/freebsd/freebsd-src/pull/735
Some command definitions were forced to use DB_FUNC in order to specify
their required flags, CS_OWN or CS_MORE. Use the new macros to simplify
these.
Reviewed by: markj, jhb
MFC after: 3 days
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D35582
The generated C output for aicasm_scan.l defines yylineno already, so
references to it from other files should use an extern declaration.
The STAILQ_HEAD use in aicasm_symbol.h also provided an identifier,
causing it to both define the struct type and define a variable of that
struct type, causing any C file including the header to define the same
variable. This variable is not used (and confusingly clashes with a
field name just below) and was likely caused by confusion when switching
between defining fields using similar type macros and defining the type
itself.
Reviewed by: imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D30525
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all obvious cases as MPSAFE. All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT
Approved by: kib (mentor, blanket)
Commented by: kib, gallatin, melifaro
Differential Revision: https://reviews.freebsd.org/D23718
ahd_inb() returns type uint8_t. The shift left by untyped 24 implicitly
promotes the result to type (signed) int. Then the binary OR with uint64_t
values sign-extends the integer. If bit 31 of the read value happened to be
set, the 64-bit result would have all upper 32 bits set to 1 due to OR. This
is clearly not intended.
Reported by: Coverity
CID: 980473 (old one!)
in clang HEAD.
There was an invisible space in the middle of the tabs, and that apprently
was enough to throw off clang's column counting.
Even if clang is "incorrect" here, it's still a style(9) violation.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
VesaLocalBus or EISA. Internally, EISA and ISA are handled the same,
with VL being handled slightly differently. To avoid too much code
churn, retain the EISA name, despite it being used only for ISA
bus. When it is on the ISA bus, weird gymnastics are required with
EISA-space address accesses as well. Remove known models from the ahc
man page. Remove ahc_eisa module.
The sim_vid, hba_vid, and dev_name fields of struct ccb_pathinq are
fixed-length strings. AFAICT the only place they're read is in
sbin/camcontrol/camcontrol.c, which assumes they'll be null-terminated.
However, the kernel doesn't null-terminate them. A bunch of copy-pasted code
uses strncpy to write them, and doesn't guarantee null-termination. For at
least 4 drivers (mpr, mps, ciss, and hyperv), the hba_vid field actually
overflows. You can see the result by doing "camcontrol negotiate da0 -v".
This change null-terminates those fields everywhere they're set in the
kernel. It also shortens a few strings to ensure they'll fit within the
16-character field.
PR: 215474
Reported by: Coverity
CID: 1009997 1010000 1010001 1010002 1010003 1010004 1010005
CID: 1331519 1010006 1215097 1010007 1288967 1010008 1306000
CID: 1211924 1010009 1010010 1010011 1010012 1010013 1010014
CID: 1147190 1010017 1010016 1010018 1216435 1010020 1010021
CID: 1010022 1009666 1018185 1010023 1010025 1010026 1010027
CID: 1010028 1010029 1010030 1010031 1010033 1018186 1018187
CID: 1010035 1010036 1010042 1010041 1010040 1010039
Reviewed by: imp, sephe, slm
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D9037
Differential Revision: https://reviews.freebsd.org/D9038
Uses of commas instead of a semicolons can easily go undetected. The comma
can serve as a statement separator but this shouldn't be abused when
statements are meant to be standalone.
Detected with devel/coccinelle following a hint from DragonFlyBSD.
MFC after: 1 month
