MK_NVME is no longer marked broken for any platforms, so just include
support for it always as we do for ATA and SCSI.
Reviewed by: emaste
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D44841
Thanks to Toshiba for providing the SCSI spec for their latest
generation drives so I could confirm how they operate.
The firmware download works in a pretty standard way, so this
is a straightforward table addition.
sbin/camcontrol/camcontrol.8:
Document that Toshiba drives are supported for fwdownload,
and that it was tested on TOSHIBA MG10SFA22TE 22TB drives.
sbin/camcontrol/fwdownload.c:
Add TOSHIBA to the known SCSI vendors list for fwdownload.
Sponsored by: Spectra Logic
MFC after: 3 days
As the name suggests, this sends a SCSI REQUEST SENSE to a device,
and prints out decoded sense information. It can also print out a
hexdump of the sense data.
sbin/camcontrol/camcontrol.c:
Add the new sense subcommand.
sbin/camcontrol/camcontrol.8:
Document camcontrol sense.
Sponsored by: Spectra Logic
Reviewed by: mav
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D43225
On line 748, "bigger than" is mistyped as "bigger then", and on line
765, "more than" is mistyped as "more then".
Event: Advanced UNIX Programming Course (Fall’23) at NTHU.
Reviewed by: imp
Pull Request: https://github.com/freebsd/freebsd-src/pull/949
Apply the following automated changes to try to eliminate
no-longer-needed sys/cdefs.h includes as well as now-empty
blank lines in a row.
Remove /^#if.*\n#endif.*\n#include\s+<sys/cdefs.h>.*\n/
Remove /\n+#include\s+<sys/cdefs.h>.*\n+#if.*\n#endif.*\n+/
Remove /\n+#if.*\n#endif.*\n+/
Remove /^#if.*\n#endif.*\n/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/types.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/param.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/capsicum.h>/
Sponsored by: Netflix
I have several environments, and at least one of them fails to build
because bool is undefined. Since we use bool, always include stdbool.h
rather than relying on any indirect definitions to pull it in.
Sponsored by: Netflix
Remove a set but never used variable, and use the protocol variable for
its intended purpose.
Sponsored by: Netflix
Reviewed by: mav
Differential Revision: https://reviews.freebsd.org/D40528
camcontrol(8) says that -S to start at a different offset implies that
we're using the 12 byte command. But really, we're using the 10-byte
command. Fix this by setting use_12byte for -S.
Sponsored by: Netflix
Reviewed by: mav
Differential Revision: https://reviews.freebsd.org/D40526
We don't need to count the number of lists requested. Instead, use the
more general form of checking to see if any of the non-defect format
bits are set. Also, check summary boolean to control summary reporting
behavior.
Sponsored by: Netflix
Reviewed by: mav
Differential Revision: https://reviews.freebsd.org/D40524
We can or in the the list_format bits directly if we or in the
list_format when we look it up the first time. Free up CAM_ARG_[PG]LIST
from the CAM_ARG_xxx enum.
Sponsored by: Netflix
Reviewed by: mav (I made his suggested change)
Differential Revision: https://reviews.freebsd.org/D40523
We always start out using the 10-byte version of READ DEFECT DATA, and
then switch to 12-byte when necessary due to errors or data length
requirements. We always need to get the length again when we do this,
and we're always going to be using 12-byte commands from that point
forward. Simplify the logic a bit based on this observation.
Sponsored by: Netflix
Reviewed by: mav
Differential Revision: https://reviews.freebsd.org/D40522
Remove CAM_ARG_FORMAT_{BLOCK,BLI,PHYS} since they are not used. Label
all the unused CAM_ARG_ bits as unused in comments to make them stand
out.
Sponsored by: Netflix
Reviewed by: mav
Differential Revision: https://reviews.freebsd.org/D40520
The SPDX folks have obsoleted the BSD-2-Clause-NetBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
Minor improvements to the fwdownload code suggested by chs@:
o Print the path_id/target we're rescanning so it's not invisible
o No need for XPT_GDEVLIST, all the info is filled in. Remove sending it
as well as a comment related to it from a mistaken observation. libcam
always fills these in properly, so use those for the ccb path/target.
o Don't leak /dev/xpt fd in success cases.
o Rename fw_rescan_lun to fw_rescan_target and pass sim_mode to
only print path_id and target_id info.
Reviewed by: chs@
Fixes: 9835900cb9
Sponsored by: Netflix
MFC After: 1 week
Differential Revision: https://reviews.freebsd.org/D34348
After downloading the firmware to a device, it's inquiry data likely
will change. Force a rescan of the target with the CAM_EXPECT_INQ_CHANGE
flag to get it to record the new inqury data as being expected. This
avoids the need for a 'camcontrol rescan' on the device which detaches
and re-attaches the disk (da, ada) device. This brings fwdownload up to
nvmecontrol's ability to do the same thing w/o changing the exposed
nvme/nvd/nda device. We scan the target and not the LUN because dual
actuator drives have multiple LUNs, but the firmware is global across
many vendors' drives (and the so far theoretical ones that aren't won't
be harmed by the rescan).
Since the underlying struct disk is now preserved accross this
operation, it's now possible to upgrade firmware of a root device w/o
crashing the system. On systems that are quite busy, the worst that
happens is that certain operaions are reported cancelled when the new
firmware is activated. These operations are retried with the normal CAM
recovery mechanisms and will work on the retry. The only visible hiccup
is the time that new firmware is flashing / initializing. One should not
consider this operation completely risk free, however, since not all
drives are well behaved after a firmware download.
MFC After: 1 week
Relnotes: yes
Sponsored by: Netflix
Feedback by: mav
Differential Revision: https://reviews.freebsd.org/D34325
Those can be returned by CHECK POWER MODE command (0xe5).
Note that some of the definitions duplicate definitions for Extended
Power Conditions.
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D33646
Patch the manpage to remove references to devq_openings and devq_queued.
Document the allocated tag that has been added in the same commit. The
relevant code change was committed as r271588
(959ec2581b) by mav@.
PR: 223651
MFH after: 3 days
Reported by: Bertrand Petit <bsdpr@phoe.frmug.org>
Implement and document the new depop command. This command manages drive elements
for drives that support it. Storage elements are typically heads. Element status
can be discovered. Elements may be removed or restored. And the status of any
current depop operation can be assessed.
depop -d elm will remove element elm and truncate available capacity.
depop -l will list the current drive elements and their current status.
depop -r elm will try to restore all retired elements and rebuild capacity.
Changing storage elements may reinitialize the drive. This operation will lose
data and may take hours to complete. Use the drive provided timeout for
operations by default.
Reviewed by: gbe (manpages)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D29018
After 3e404b8c53, cam_getccb(3) clears the returned CCB, making
a number of calls to CCB_CLEAR_ALL_EXCEPT_HDR(3) unnecessary.
Reviewed By: imp
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D27812
Some SATA drives have 'config' set to 0 in the identify block. Rather than rely
on it, use the strings windows uses to display the drive since they are supposed
to be space padded and will always be non-zero.
This adds the help messages for camcontrol(8) in-binary help.
Man page will follow in the separate change.
Reviewed by: bz
Approved by: imp (mentor)
Differential Revision: https://reviews.freebsd.org/D25963
Enhance camcontrol(8) so that it's possible to manually set frequency for SD/MMC cards.
While here, display more information about the current controller, such as
supported operating modes and VCCQ voltages, as well as current VCCQ voltage.
Reviewed by: manu
Approved by: imp (mentor)
Differential Revision: https://reviews.freebsd.org/D25795
This avoids gcc9 warning about unaligned access to the structure when
casting to uint16_t pointer type.
Submitted by: imp
Reviewed by: imp
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D22888
It seems I read specifications not careful enough. There are devices not
setting successful completion bit, causing previous code report false error.
MFC after: 1 week
Before my refactoring the code reported value as maximum number of sectors,
adding one to the maximum sector number returned by respective command.
While this difference is somewhat confusing, restore previous behavior.
MFC after: 3 days
