synchronized by the lock on the object containing the page.
Transition PG_WANTED and PG_SWAPINPROG to use the new field,
eliminating the need for holding the page queues lock when setting
or clearing these flags. Rename PG_WANTED and PG_SWAPINPROG to
VPO_WANTED and VPO_SWAPINPROG, respectively.
Eliminate the assertion that the page queues lock is held in
vm_page_io_finish().
Eliminate the acquisition and release of the page queues lock
around calls to vm_page_io_finish() in kern_sendfile() and
vfs_unbusy_pages().
kern_accept() and accept1(). If another thread closed the new file
descriptor and the first thread later got an error trying to copyout the
socket address, then it would attempt to close the wrong file object. To
fix, add a struct file ** argument to kern_accept(). If it is non-NULL,
then on success kern_accept() will store a pointer to the new file object
there and not release any of the references. It is up to the calling code
to drop the references appropriately (including a call to fdclose() in case
of error to safely handle the aforementioned race). While I'm at it, go
ahead and fix the svr4 streams code to not leak the accept fd if it gets an
error trying to copyout the streams structures.
soreceive(), and sopoll(), which are wrappers for pru_sosend,
pru_soreceive, and pru_sopoll, and are now used univerally by socket
consumers rather than either directly invoking the old so*() functions
or directly invoking the protocol switch method (about an even split
prior to this commit).
This completes an architectural change that was begun in 1996 to permit
protocols to provide substitute implementations, as now used by UDP.
Consumers now uniformly invoke sosend(), soreceive(), and sopoll() to
perform these operations on sockets -- in particular, distributed file
systems and socket system calls.
Architectural head nod: sam, gnn, wollman
use by ABI emulators.
- Alter the interface of kern_recvit() somewhat. Specifically, go ahead
and hard code UIO_USERSPACE in the uio as that's what all the callers
specify. In place, add a new uioseg to indicate what type of pointer
is in mp->msg_name. Previously it was always a userland address, but
ABI emulators may pass in kernel-side sockaddrs. Also, remove the
namelenp field and instead require the two places that used it to
explicitly copy mp->msg_namelen out to userland.
- Use the patched kern_recvit() to replace svr4_recvit() and the stock
kern_sendit() to replace svr4_sendit().
- Use kern_bind() instead of stackgap use in ti_bind().
- Use kern_getpeername() and kern_getsockname() instead of stackgap in
svr4_stream_ti_ioctl().
- Use kern_connect() instead of stackgap in svr4_do_putmsg().
- Use kern_getpeername() and kern_accept() instead of stackgap in
svr4_do_getmsg().
- Retire the stackgap from SVR4 compat as it is no longer used.
in setsockopt so that they can be compared correctly against negative
values. Passing in a negative value had a rather negative effect
on our socket code, making it impossible to open new sockets.
PR: 98858
Submitted by: James.Juran@baesystems.com
MFC after: 1 week
- Move sonewconn(), which creates new sockets for incoming connections on
listen sockets, so that all socket allocate code is together in
uipc_socket.c.
- Move 'maxsockets' and associated sysctls to uipc_socket.c with the
socket allocation code.
- Move kern.ipc sysctl node to uipc_socket.c, add a SYSCTL_DECL() for it
to sysctl.h and remove lots of scattered implementations in various
IPC modules.
- Sort sodealloc() after soalloc() in uipc_socket.c for dependency order
reasons. Statisticize soalloc() and sodealloc() as they are now
required only in uipc_socket.c, and are internal to the socket
implementation.
After this change, socket allocation and deallocation is entirely
centralized in one file, and uipc_socket2.c consists entirely of socket
buffer manipulation and default protocol switch functions.
MFC after: 1 month
sendfile(). This causes sendfile() to use the file descriptor
reference to the socket instead of bumping the socket reference
count, which avoids an additional refcount operation, as well as a
potential expensive socket refcount drop, which can lead to
contention on the accept mutex. This change also has the side
effect of further reducing the number of cases where an in-progress
I/O operation can occur on a socket after close, as using the file
descriptor refcount prevents the socket from closing while in use.
MFC after: 3 months
file lock, in the style of fgetsock().
Modify accept1() to use getsock() instead of fgetsock(), relying on the
file descriptor reference rather than an acquired socket reference to
prevent the listen socket from being destroyed during accept(). This
avoids additional reference count operations, which should improve
performance, and also avoids accept1() operating on a socket whose file
descriptor has been torn down, which may have resulted in protocol
shutdown starting.
MFC after: 3 months
acquiring Giant in kern_sendfile().
Guard against the forced reclamation of a vnode in kern_sendfile().
Discussed with: jeff
Reviewed by: tegge
MFC after: 3 weeks
which is invoked from socket() and socketpair(), permitting MAC
policy modules to control the creation of sockets by domain, type, and
protocol.
Obtained from: TrustedBSD Project
Sponsored by: SPARTA, SPAWAR
Approved by: re (scottl)
Requested by: SCC
to the mbuf. Offset cannot exceed MHLEN bytes. This is currently used to
fix Ethernet header alignment problem on alpha and sparc64. Also change all
users of m_uiotombuf to pass proper offset.
Reviewed by: jmg, sam
Tested by: Sten Spans "sten AT blinkenlights DOT nl"
MFC after: 1 week
control socket poll() (select()), fstat(), and accept() operations,
required for some policies:
poll() mac_check_socket_poll()
fstat() mac_check_socket_stat()
accept() mac_check_socket_accept()
Update mac_stub and mac_test policies to be aware of these entry points.
While here, add missing entry point implementations for:
mac_stub.c stub_check_socket_receive()
mac_stub.c stub_check_socket_send()
mac_test.c mac_test_check_socket_send()
mac_test.c mac_test_check_socket_visible()
Obtained from: TrustedBSD Project
Sponsored by: SPAWAR, SPARTA
SIGPIPE signal for the duration of the sento-family syscalls. Use it to
replace previously added hack in Linux layer based on temporarily setting
SO_NOSIGPIPE flag.
Suggested by: alfred
soref() to also covering the update of so_state. While no other user
threads can update the socket state here as it's not yet hooked up to
the file descriptor array yet, the protocol could also frob the
socket state here, leading to a lost update to the so_state field.
No reported instances of this bug (as yet).
MFC after: 3 days
Use this in all the places where sleeping with the lock held is not
an issue.
The distinction will become significant once we finalize the exact
lock-type to use for this kind of case.
Change the spelling of the "catch" option to be consistent with the new
options. Implement the "no wait" option. An implementation of the "CPU
private" for i386 will be committed at a later date.
need for most calls to vm_page_busy(). Specifically, most calls to
vm_page_busy() occur immediately prior to a call to vm_page_remove().
In such cases, the containing vm object is locked across both calls.
Consequently, the setting of the vm page's PG_BUSY flag is not even
visible to other threads that are following the synchronization
protocol.
This change (1) eliminates the calls to vm_page_busy() that
immediately precede a call to vm_page_remove() or functions, such as
vm_page_free() and vm_page_rename(), that call it and (2) relaxes the
requirement in vm_page_remove() that the vm page's PG_BUSY flag is
set. Now, the vm page's PG_BUSY flag is set only when the vm object
lock is released while the vm page is still in transition. Typically,
this is when it is undergoing I/O.
count to prevent sockets from being garbage collected during
socket-specific system calls. This is the same approach used in
most VFS-specific system calls, as well as generic file descriptor
system calls such as read() and write().
To do this, add a utility function getsock(), which is logically
identical to getvnode() used for the same purpose in VFS. Unlike
fgetsock(), it returns with the file reference count elevated, but
no bump of the socket reference count. Replace matching calls to
fputsock() with fdrop().
This change is made to all socket system calls other than
sendfile() and accept(), but the approach should be applicable to
those system calls also.
This shaves about four mutex operations off of each of these
system calls, including send() and recv() variants, adding about
1% to pps on minimal UDP packets for UP using netblast, and 4% on
SMP.
Reviewed by: pjd
is locked when vm_page_io_finish() is called on a page. This is to satisfy
a new, post-RELENG_5 assertion in vm_page_io_finish(). (I am in the
process of transitioning the responsibility for synchronizing access to
various fields/flags on the page from the global page queues lock to the
per-object lock.)
Tripped over by: obrien@
a more complete subsystem, and removes the knowlege of how things are
implemented from the drivers. Include locking around filter ops, so a
module like aio will know when not to be unloaded if there are outstanding
knotes using it's filter ops.
Currently, it uses the MTX_DUPOK even though it is not always safe to
aquire duplicate locks. Witness currently doesn't support the ability
to discover if a dup lock is ok (in some cases).
Reviewed by: green, rwatson (both earlier versions)
values from either user land or from the kernel. Use them for
[gs]etsockopt and to clean up some calls to [gs]etsockopt in the
Linux emulation code that uses the stackgap.
Add copyiniov() which copies a struct iovec array in from userland into
a malloc'ed struct iovec. Caller frees.
Change uiofromiov() to malloc the uio (caller frees) and name it
copyinuio() which is more appropriate.
Add cloneuio() which returns a malloc'ed copy. Caller frees.
Use them throughout.
the SS_NBIO flag from the parent socket to the child socket during an
accept() operation.
The file descriptor O_NONBLOCK flag would have been propagated already
by the fflag assignment, and therefore would have been inconsistent
with the underlying socket's so_state member.
This makes accept() more closely adhere to the API contract we effectively
outline in the manual page. Note also that Linux continues to differ here;
O_NONBLOCK is not propagated. The other BSDs do propagate the flag, as
does Solaris. The Single UNIX Specification does not offer specific
advice on this issue.
PR: kern/45733
Requested by: Jayanth Vijayaraghavan
Reviewed by: rwatson
lock state. Convert tsleep() into msleep() with socket buffer mutex
as argument. Hold socket buffer lock over sbunlock() to protect sleep
lock state.
Assert socket buffer lock in sbwait() to protect the socket buffer
wait state. Convert tsleep() into msleep() with socket buffer mutex
as argument.
Modify sofree(), sosend(), and soreceive() to acquire SOCKBUF_LOCK()
in order to call into these functions with the lock, as well as to
start protecting other socket buffer use in their implementation. Drop
the socket buffer mutexes around calls into the protocol layer, around
potentially blocking operations, for copying to/from user space, and
VM operations relating to zero-copy. Assert the socket buffer mutex
strategically after code sections or at the beginning of loops. In
some cases, modify return code to ensure locks are properly dropped.
Convert the potentially blocking allocation of storage for the remote
address in soreceive() into a non-blocking allocation; we may wish to
move the allocation earlier so that it can block prior to acquisition
of the socket buffer lock.
Drop some spl use.
NOTE: Some races exist in the current structuring of sosend() and
soreceive(). This commit only merges basic socket locking in this
code; follow-up commits will close additional races. As merged,
these changes are not sufficient to run without Giant safely.
Reviewed by: juli, tjr
flags relating to several aspects of socket functionality. This change
breaks out several bits relating to send and receive operation into a
new per-socket buffer field, sb_state, in order to facilitate locking.
This is required because, in order to provide more granular locking of
sockets, different state fields have different locking properties. The
following fields are moved to sb_state:
SS_CANTRCVMORE (so_state)
SS_CANTSENDMORE (so_state)
SS_RCVATMARK (so_state)
Rename respectively to:
SBS_CANTRCVMORE (so_rcv.sb_state)
SBS_CANTSENDMORE (so_snd.sb_state)
SBS_RCVATMARK (so_rcv.sb_state)
This facilitates locking by isolating fields to be located with other
identically locked fields, and permits greater granularity in socket
locking by avoiding storing fields with different locking semantics in
the same short (avoiding locking conflicts). In the future, we may
wish to coallesce sb_state and sb_flags; for the time being I leave
them separate and there is no additional memory overhead due to the
packing/alignment of shorts in the socket buffer structure.
SOCK_LOCK(so):
- Hold socket lock over calls to MAC entry points reading or
manipulating socket labels.
- Assert socket lock in MAC entry point implementations.
- When externalizing the socket label, first make a thread-local
copy while holding the socket lock, then release the socket lock
to externalize to userspace.
reference count:
- Assert SOCK_LOCK(so) macros that directly manipulate so_count:
soref(), sorele().
- Assert SOCK_LOCK(so) in macros/functions that rely on the state of
so_count: sofree(), sotryfree().
- Acquire SOCK_LOCK(so) before calling these functions or macros in
various contexts in the stack, both at the socket and protocol
layers.
- In some cases, perform soisdisconnected() before sotryfree(), as
this could result in frobbing of a non-present socket if
sotryfree() actually frees the socket.
- Note that sofree()/sotryfree() will release the socket lock even if
they don't free the socket.
Submitted by: sam
Sponsored by: FreeBSD Foundation
Obtained from: BSD/OS
when I reordered events in accept1() to allocate a file descriptor
earlier, I didn't properly update use of goto on exit to unwind for
cases where the file descriptor is now held, but wasn't previously.
The result was that, in the event of accept() on a non-blocking socket,
or in the event of a socket error, a file descriptor would be leaked.
This ended up being non-fatal in many cases, as the file descriptor
would be properly GC'd on process exit, so only showed up for processes
that do a lot of non-blocking accept() calls, and also live for a long
time (such as qmail).
This change updates the use of goto targets to do additional unwinding.
Eyes provided by: Brian Feldman <green@freebsd.org>
Feet, hands provided by: Stefan Ehmann <shoesoft@gmx.net>,
Dimitry Andric <dimitry@andric.com>
Arjan van Leeuwen <avleeuwen@piwebs.com>
