static version that installs in /stand. Also, don't use an extra
before-install target to create /stand.
- Add missing $FreeBSD$.
- Fix dependencies to handle keymap.h. (*)
Submitted by: obrien (*)
non-advertised option (F = "FreeBSD only"), and leave the A key with
standard partitioning. It seems people still want a runtime backdoo
to get to dangerously dedicated mode.
at people. This has been sitting in my tree for a few months now. I
have spoken with quite a few folks about this and the support for doing
this was pretty strong. I dont remember names though, so I cannot share
the blame :-(. Note that this does not *remove* DD mode, it just stops
waving it at new users. You can still set it via config files etc, and
the bootblocks and kernel still support it. You can still use disklabel
to make true DD disks.
- IP addresses are verified as being correct dotted quad format.
- Netmasks are verified as being in correct dotted quad or 0x* format,
and being consecutive 1 bits followed by consecutive 0 bits.
- The gateway is verified as being correct dotted quad format and
being reachable through the configured IP address and netmask.
no as a default. Sysinstall should be both less dangerous and less
annoying as a result of this change, though that's just my opinion
(since they're the defaults which annoy ME the least :).
standard or serial. This change needs to be done to the entire system that
depends on this. This way we don't have some code using OnVTY checks
and other doing
strcmp(variable_get(VAR_FIXIT_TTY), "standard") == 0
checks. Also we need to set VAR_FIXIT_TTY to "serial" if we come up on
a serial console.
Also fixed a dialog problem in that dialog was used when dialog was
disabled causing some troubles such as not letting the cursor keys
work when exiting the fixit mode on media (ie. not the fixit shell but
for example fixit on a floppy).
Submitted by: Doug Ambrisko <ambrisko@whistle.com>
PR: 22352
rename the previous one to indicate that it's not just high, it's
extreme (everything off, secure level raised).
Submitted mostly by: Tony Finch <dot@dotat.at>
Replace all in-tree uses with necessary subset of <sys/{fb,kb,cons}io.h>.
This is also the appropriate fix for exo-tree sources.
Put warnings in <machine/console.h> to discourage use.
November 15th 2000 the warnings will be converted to errors.
January 15th 2001 the <machine/console.h> files will be removed.
Approved by: jkh
Write kern_securelevel_enable variable to rc.conf if user selects
medium or low security in sysinstall. This overrides the case where a
user selects fascist security and then tries to go back to a lower
setting.
a default. This should prevent people from whacking return at
the Distributions menu and getting nothing selected as a result
(a minimal "standard" system will at least install).
Flagged as big tech support headache by: Chris Shumway <cshumway@osd.bsdi.com>
support which use National Semiconductor DP8393X (SONIC) as ethernet
controller. Currently, this driver is used on only PC-98.
Submitted by: Motomichi Matsuzaki <mzaki@e-mail.ne.jp>
Obtained from: NetBSD/pc98
appropriate(?) defaults for "low", "medium" and "high" security
environments. Medium is basically what we currently have with a little
seat-belt tightening where it made sense. Low is the same as medium but
without the tightening. High is positively fascist with nothing turned
on by default and an automatic call to 911 if it can find a modem.
really doesn't make any sense, what was I smoking) and allow
the more canonical usage of "any" for either side of the comparison
for release name or architecture (meaning you can also set CD_VERSION=any
in a cdrom.inf file to cause sysinstall to always match it and likewise
with the architecture, if specified).
Sensibly suggested by: Makoto MATSUSHITA <matusita@jp.FreeBSD.org>
Previously, these cards were supported by the lnc driver (and they
still are, but the pcn driver will claim them first), which is fine
except the lnc driver runs them in 16-bit LANCE compatibility mode.
The pcn driver runs these chips in 32-bit mode and uses the RX alignment
feature to achieve zero-copy receive. (Which puts it in the same
class as the xl, fxp and tl chipsets.) This driver is also MI, so it
will work on the x86 and alpha platforms. (The lnc driver is still
needed to support non-PCI cards. At some point, I'll need to newbusify
it so that it too will me MI.)
The Am79c978 HomePNA adapter is also supported.
configure FreeBSD so that various databases such as passwd and group can be
looked up using flat files, NIS, or Hesiod.
= Hesiod has been added to libc (see hesiod(3)).
= A library routine for parsing nsswitch.conf and invoking callback
functions as specified has been added to libc (see nsdispatch(3)).
= The following C library functions have been modified to use nsdispatch:
. getgrent, getgrnam, getgrgid
. getpwent, getpwnam, getpwuid
. getusershell
. getaddrinfo
. gethostbyname, gethostbyname2, gethostbyaddr
. getnetbyname, getnetbyaddr
. getipnodebyname, getipnodebyaddr, getnodebyname, getnodebyaddr
= host.conf has been removed from src/etc. rc.network has been modified
to warn that host.conf is no longer used at boot time. In addition, if
there is a host.conf but no nsswitch.conf, the latter is created at boot
time from the former.
Obtained from: NetBSD
When we use PC-Card as install media, it is a patch
to tell with beep about whether we were able to
recognize it well.
Reviewed by: jkh, imp
Tested by: Kenji Yamada <kyamada@ISI.EDU>
Make sysinstall override this on install, so the effective behavioural
change for a newly installed system is null. Overall, this makes a system
with an empty /etc/rc.conf not run any network services, and makes the
FreeBSD-provided network services that are running visible in /etc/rc.conf
(instead of making people look through /etc/defaults/rc.conf to find the
things they need to disable to secure the system.)
Reviewed by: jhb
Discussed with: The usual cabal
Now, if a release is specified, instead of just looking for a directory
with the same name as the release, try several possible directories (each
suffixed with the release name) relative to the base directory including
".", "releases/MACHINE", "snapshots/MACHINE", and each of those prefixed
with "pub/FreeBSD/". This will allow us to remove the evil symlinks under
pub/FreeBSD/releases/MACHINE/ to the snapshots on the ftp site.
does bad things to /etc/make.conf in certain situations. Also
soften the "don't install crypto from the USA!" messages since,
except for RSA (which is still noted), that's not so true anymore.
IPv6 configuration is only done by rtsol. Does someone really
need manual configuration? :-)
You can specify IPv6 DNS server as well.
We have only one server ftp7.jp.freebsd.org that speaks IPv6
in this time. ftp7.jp speaks IPv4 as well and also listed as
Japan #7.
Approved by: jkh
boot.flp and plain boot.flp.
- Clean up crunchgen related routine.
- Add PC-98 support.
TODO:
o Documentation
o Fix some messages for PC-98
o Decrease the size of fixit.flp to 1.2MB
o I18N (See: http://www.jp.FreeBSD.org/BootAsia/index.html)
No response from jkh
setting 'usbd_enable' in rc.conf during nwe installs if USB is detected.
Also, since usbd already handles USB mice automatically, note that the
mouse setup section in sysinstall only applies to non-USB mice.
hostname of the FTP server; that is the proxy's job. This temporarily
deletes the nameserver variable before calling mediaSetFTP.
PR: 17371
Approved by: jkh
Approved by: jkh
You can't enable 'emulate 3 button' option for moused in sysinstall.
This adds a menu option to set moused_flags and the help text explains
that entering "-3" will enable this feature.
be detected by netscape and such.
PR: bin/17659
Submitted by: Murray Stokelay <murray@cdrom.com>
Approved by: jkh
jkh made updates that conflict with the submitters patch, so I updated
accordingly, any mistakes are mine, not the submitters.
for generating /boot/kernel.conf. Since this structure is shared, move
its definition out to a header file, just as struct isa_device was defined
in a header file. This fixes the sysinstall breakage in -current.
on locale.
o Allow use of "G" in label editor to stand for gigabytes. This
is actually an unrelated patch which I meant to commit separately
but what the heck, it's late.
Partially submitted by: phk
straight into debug mode if you boot -v. Also conditionalize some
annoying debugging output now that we have this ability.
Partially submitted by: msmith
Approved by: jkh [to make certain wise-acres happy ;)]
a distribution, recognize it and treat as fatal media error. This
happens in the case of a timeout on FTP installations where the
user chooses not to select another FTP site, and resulted in
segmentation fault.
Approved by: jkh
Applied modified patch, since ATA/ATAPI is the keyword nowadays.
PR: 16507
Submitted by: Dan Papasian <bugg@bugg.strangled.net>
No need for an OK since we can exercise our divine rights as docpersons
according to: jkh
USB-EL1202A chipset. Between this and the other two drivers, we should
have support for pretty much every USB ethernet adapter on the market.
The only other USB chip that I know of is the SMC USB97C196, and right
now I don't know of any adapters that use it (including the ones made
by SMC :/ ).
Note that the CATC chip supports a nifty feature: read and write combining.
This allows multiple ethernet packets to be transfered in a single USB
bulk in/out transaction. However I'm again having trouble with large
bulk in transfers like I did with the ADMtek chip, which leads me to
believe that our USB stack needs some work before we can really make
use of this feature. When/if things improve, I intend to revisit the
aue and cue drivers. For now, I've lost enough sanity points.
Kawasaki LSI KL5KUSB101B chip, including the LinkSys USB10T, the
Entrega NET-USB-E45, the Peracom USB Ethernet Adapter, the 3Com
3c19250 and the ADS Technologies USB-10BT. This device is 10mbs
half-duplex only, so there's miibus or ifmedia support. This device
also requires firmware to be loaded into it, however KLSI allows
redistribution of the firmware images (I specifically asked about
this; they said it was ok).
Special thanks to Annelise Anderson for getting me in touch with
KLSI (eventually) and thanks to KLSI for providing the necessary
programming info.
Highlights:
- Add driver files to /sys/dev/usb
- update usbdevs and regenerate attendate files
- update usb_quirks.c
- Update HARDWARE.TXT and RELNOTES.TXT for i386 and alpha
- Update LINT, GENERIC and others for i386, alpha and pc98
- Add man page
- Add module
- Update sysinstall and userconfig.c
USB ethernet chip. Adapters that use this chip include the LinkSys
USB100TX. There are a few others, but I'm not certain of their
availability in the U.S. I used an ADMtek eval board for development.
Note that while the ADMtek chip is a 100Mbps device, you can't really
get 100Mbps speeds over USB. Regardless, this driver uses miibus to
allow speed and duplex mode selection as well as autonegotiation.
Building and kldloading the driver as a module is also supported.
Note that in order to make this driver work, I had to make what some
may consider an ugly hack to sys/dev/usb/usbdi.c. The usbd_transfer()
function will use tsleep() for synchronous transfers that don't complete
right away. This is a problem since there are times when we need to
do sync transfers from an interrupt context (i.e. when reading registers
from the MAC via the control endpoint), where tsleep() us a no-no.
My hack allows the driver to have the code poll for transfer completion
subject to the xfer->timeout timeout rather that calling tsleep().
This hack is controlled by a quirk entry and is only enabled for the
ADMtek device.
Now, I'm sure there are a few of you out there ready to jump on me
and suggest some other approach that doesn't involve a busy wait. The
only solution that might work is to handle the interrupts in a kernel
thread, where you may have something resembling a process context that
makes it okay to tsleep(). This is lovely, except we don't have any
mechanism like that now, and I'm not about to implement such a thing
myself since it's beyond the scope of driver development. (Translation:
I'll be damned if I know how to do it.) If FreeBSD ever aquires such
a mechanism, I'll be glad to revisit the driver to take advantage of
it. In the meantime, I settled for what I perceived to be the solution
that involved the least amount of code changes. In general, the hit
is pretty light.
Also note that my only USB test box has a UHCI controller: I haven't
I don't have a machine with an OHCI controller available.
Highlights:
- Updated usb_quirks.* to add UQ_NO_TSLEEP quirk for ADMtek part.
- Updated usbdevs and regenerated generated files
- Updated HARDWARE.TXT and RELNOTES.TXT files
- Updated sysinstall/device.c and userconfig.c
- Updated kernel configs -- device aue0 is commented out by default
- Updated /sys/conf/files
- Added new kld module directory
working. It was, as I predicted, a stupid bug and thanks to the
submitter for spotting it. I'll also re-roll some 3.4-RELEASE install
floppies for this.
as redoing all the menus to have proper, or at least non-hallucinogenic,
keyboard accelerators.
This requires my recent update to libdialog to work properly and will
probably also exhibit some other "interesting" behavior while the last
few missing screen clears are found (which is why I'm not going to MFC
immediately). At least now, however, sysinstall does not gratuitously
redraw random screens at the drop of a hat and drive serial console
installers out of their minds.
which it replaces. The new driver supports all of the chips supported
by the ones it replaces, as well as many DEC/Intel 21143 10/100 cards.
This also completes my quest to convert things to miibus and add
Alpha support.
for the AN985 "Centaur" chip, which is apparently the next genetation
of the "Comet." The AN985 is also a tulip clone and is similar to the
AL981 except that it uses a 99C66 EEPROM and a serial MII interface
(instead of direct access to the PHY registers).
Also updated various documentation to mention the AN985 and created
a loadable module.
I don't think there are any cards that use this chip on the market yet:
the datasheet I got from ADMtek has boxes with big X's in them where the
diagrams should be, and the sample boards I got have chips without any
artwork on them.
