SiS190 supports RX 10 bytes padding, CRC stripping as well as VLAN

hardware tag insertion/stripping. Remove conditional code that
disables these hardware features on SiS190. Also nuke RX fixup code
which is no more required on strict-alignment architectures because
SiS190 supports RX 10 bytes padding.
Now all hardware features except jumbo frame and WOL are supported.
Thanks to Masa Murayama who confirmed SiS190 also has the same
hardware features of SiS191.
I guess the only difference between SiS191 and SiS190 would be
jumbo frame support. It will be implemented in near future.
This commit is contained in:
Pyun YongHyeon 2010-05-10 17:35:17 +00:00
parent 65329b3111
commit 8775710a1d
Notes: svn2git 2020-12-20 02:59:44 +00:00
svn path=/head/; revision=207852

View file

@ -117,10 +117,6 @@ static void sge_miibus_statchg(device_t);
static int sge_newbuf(struct sge_softc *, int);
static int sge_encap(struct sge_softc *, struct mbuf **);
#ifndef __NO_STRICT_ALIGNMENT
static __inline void
sge_fixup_rx(struct mbuf *);
#endif
static __inline void
sge_discard_rxbuf(struct sge_softc *, int);
static void sge_rxeof(struct sge_softc *);
@ -644,10 +640,8 @@ sge_attach(device_t dev)
ether_ifattach(ifp, eaddr);
/* VLAN setup. */
if ((sc->sge_flags & SGE_FLAG_SIS190) == 0)
ifp->if_capabilities |= IFCAP_VLAN_HWTAGGING |
IFCAP_VLAN_HWCSUM | IFCAP_VLAN_HWTSO;
ifp->if_capabilities |= IFCAP_VLAN_MTU;
ifp->if_capabilities |= IFCAP_VLAN_HWTAGGING | IFCAP_VLAN_HWCSUM |
IFCAP_VLAN_HWTSO | IFCAP_VLAN_MTU;
ifp->if_capenable = ifp->if_capabilities;
/* Tell the upper layer(s) we support long frames. */
ifp->if_data.ifi_hdrlen = sizeof(struct ether_vlan_header);
@ -1129,23 +1123,6 @@ sge_newbuf(struct sge_softc *sc, int prod)
return (0);
}
#ifndef __NO_STRICT_ALIGNMENT
static __inline void
sge_fixup_rx(struct mbuf *m)
{
int i;
uint16_t *src, *dst;
src = mtod(m, uint16_t *);
dst = src - 3;
for (i = 0; i < (m->m_len / sizeof(uint16_t) + 1); i++)
*dst++ = *src++;
m->m_data -= (SGE_RX_BUF_ALIGN - ETHER_ALIGN);
}
#endif
static __inline void
sge_discard_rxbuf(struct sge_softc *sc, int index)
{
@ -1228,23 +1205,15 @@ sge_rxeof(struct sge_softc *sc)
m->m_pkthdr.ether_vtag = rxinfo & RDC_VLAN_MASK;
m->m_flags |= M_VLANTAG;
}
if ((sc->sge_flags & SGE_FLAG_SIS190) == 0) {
/*
* Account for 10bytes auto padding which is used
* to align IP header on 32bit boundary. Also note,
* CRC bytes is automatically removed by the
* hardware.
*/
m->m_data += SGE_RX_PAD_BYTES;
m->m_pkthdr.len = m->m_len = SGE_RX_BYTES(rxstat) -
SGE_RX_PAD_BYTES;
} else {
m->m_pkthdr.len = m->m_len = SGE_RX_BYTES(rxstat) -
ETHER_CRC_LEN;
#ifndef __NO_STRICT_ALIGNMENT
sge_fixup_rx(m);
#endif
}
/*
* Account for 10bytes auto padding which is used
* to align IP header on 32bit boundary. Also note,
* CRC bytes is automatically removed by the
* hardware.
*/
m->m_data += SGE_RX_PAD_BYTES;
m->m_pkthdr.len = m->m_len = SGE_RX_BYTES(rxstat) -
SGE_RX_PAD_BYTES;
m->m_pkthdr.rcvif = ifp;
ifp->if_ipackets++;
SGE_UNLOCK(sc);
@ -1688,18 +1657,13 @@ sge_init_locked(struct sge_softc *sc)
CSR_WRITE_4(sc, RxWakeOnLan, 0);
CSR_WRITE_4(sc, RxWakeOnLanData, 0);
/* Allow receiving VLAN frames. */
if ((sc->sge_flags & SGE_FLAG_SIS190) == 0)
CSR_WRITE_2(sc, RxMPSControl,
ETHER_MAX_LEN + ETHER_VLAN_ENCAP_LEN + SGE_RX_PAD_BYTES);
else
CSR_WRITE_2(sc, RxMPSControl, ETHER_MAX_LEN + ETHER_VLAN_ENCAP_LEN);
CSR_WRITE_2(sc, RxMPSControl, ETHER_MAX_LEN + ETHER_VLAN_ENCAP_LEN +
SGE_RX_PAD_BYTES);
for (i = 0; i < ETHER_ADDR_LEN; i++)
CSR_WRITE_1(sc, RxMacAddr + i, IF_LLADDR(ifp)[i]);
/* Configure RX MAC. */
rxfilt = 0;
if ((sc->sge_flags & SGE_FLAG_SIS190) == 0)
rxfilt |= RXMAC_STRIP_FCS | RXMAC_PAD_ENB;
rxfilt = RXMAC_STRIP_FCS | RXMAC_PAD_ENB;
CSR_WRITE_2(sc, RxMacControl, rxfilt);
sge_rxfilter(sc);
sge_setvlan(sc);