From 792c00971aed1fe91e2885802a1a07fced74a4d2 Mon Sep 17 00:00:00 2001 From: Warner Losh Date: Thu, 16 Feb 2017 21:57:25 +0000 Subject: [PATCH] Remove EISA support from Buslogic (bt) cards. Remove known models form man page. Tweak comments to not refer to EISA scenarios now that it is no longer supported. Remove unused enum. --- share/man/man4/bt.4 | 34 +--- sys/conf/files | 1 - sys/dev/buslogic/bt.c | 18 +- sys/dev/buslogic/bt_eisa.c | 357 ------------------------------------- sys/dev/buslogic/bt_isa.c | 2 +- sys/dev/buslogic/btreg.h | 10 -- 6 files changed, 3 insertions(+), 419 deletions(-) delete mode 100644 sys/dev/buslogic/bt_eisa.c diff --git a/share/man/man4/bt.4 b/share/man/man4/bt.4 index 6a09befd423f..592cf9ca12a5 100644 --- a/share/man/man4/bt.4 +++ b/share/man/man4/bt.4 @@ -26,7 +26,7 @@ .\" .\" $FreeBSD$ .\" -.Dd June 18, 2006 +.Dd February 15, 2017 .Dt BT 4 .Os .Sh NAME @@ -66,9 +66,6 @@ BT-946C PCI 100 Fast SCSI-2 BT-956C PCI 100 Wide Fast SCSI-2 BT-956CD PCI 100 Wide Differential Fast SCSI-2 BT-445C VLB 100 Fast SCSI-2 -BT-747C EISA 100 Fast SCSI-2 -BT-757C EISA 100 Wide Fast SCSI-2 -BT-757CD EISA 100 Wide Differential Fast SCSI-2 BT-545C ISA 50 Fast SCSI-2 BT-540CF ISA 50 Fast SCSI-2 .El @@ -77,20 +74,14 @@ MultiMaster "S" Series Host Adapters: .Bl -column "BT-956CD " "ISA " "Commands " "Description" .Em "Adapter" Ta Em "Bus" Ta Em "Commands" Ta Em "Description" BT-445S VLB 30 Fast SCSI-2 -BT-747S EISA 30 Fast SCSI-2 -BT-747D EISA 30 Differential Fast SCSI-2 -BT-757S EISA 30 Wide Fast SCSI-2 -BT-757D EISA 30 Wide Differential Fast SCSI-2 BT-545S ISA 30 Fast SCSI-2 BT-542D ISA 30 Differential Fast SCSI-2 -BT-742A EISA 30 SCSI-2 (742A revision H) BT-542B ISA 30 SCSI-2 (542B revision H) .El .Pp MultiMaster "A" Series Host Adapters: .Bl -column "BT-956CD " "ISA " "Commands " "Description" .Em "Adapter" Ta Em "Bus" Ta Em "Commands" Ta Em "Description" -BT-742A EISA 30 SCSI-2 (742A revisions A - G) BT-542B ISA 30 SCSI-2 (542B revisions A - G) .El .Ed @@ -135,24 +126,6 @@ BusLogic BT-545S .It BusLogic/BusTek BT-640 .It -BusLogic BT-742A -.It -BusLogic BT-742A -.It -BusLogic BT-747C -.It -BusLogic BT-747D -.It -BusLogic BT-747S -.It -BusLogic BT-757C -.It -BusLogic BT-757CD -.It -BusLogic BT-757D -.It -BusLogic BT-757S -.It BusLogic BT-946C .It BusLogic BT-948 @@ -167,11 +140,6 @@ BusLogic BT-958D .It Storage Dimensions SDC3211B / SDC3211F .El -.Pp -AMI FastDisk Host Adapters that are true BusLogic MultiMaster clones -are also supported by the -.Nm -driver. .Sh SEE ALSO .Xr cd 4 , .Xr da 4 , diff --git a/sys/conf/files b/sys/conf/files index 4466eec9c980..bdfa57c3f478 100644 --- a/sys/conf/files +++ b/sys/conf/files @@ -1259,7 +1259,6 @@ dev/bnxt/bnxt_sysctl.c optional bnxt iflib pci dev/bnxt/bnxt_txrx.c optional bnxt iflib pci dev/bnxt/if_bnxt.c optional bnxt iflib pci dev/buslogic/bt.c optional bt -dev/buslogic/bt_eisa.c optional bt eisa dev/buslogic/bt_isa.c optional bt isa dev/buslogic/bt_pci.c optional bt pci dev/bwi/bwimac.c optional bwi diff --git a/sys/dev/buslogic/bt.c b/sys/dev/buslogic/bt.c index d3f45c893b13..c17c4f439b4c 100644 --- a/sys/dev/buslogic/bt.c +++ b/sys/dev/buslogic/bt.c @@ -3,7 +3,6 @@ * Product specific probe and attach routines can be found in: * sys/dev/buslogic/bt_isa.c BT-54X, BT-445 cards * sys/dev/buslogic/bt_mca.c BT-64X, SDC3211B, SDC3211F - * sys/dev/buslogic/bt_eisa.c BT-74X, BT-75x cards, SDC3222F * sys/dev/buslogic/bt_pci.c BT-946, BT-948, BT-956, BT-958 cards * * Copyright (c) 1998, 1999 Justin T. Gibbs. @@ -169,7 +168,7 @@ static void bttimeout(void *arg); * XXX * Do our own re-probe protection until a configuration * manager can do it for us. This ensures that we don't - * reprobe a card already found by the EISA or PCI probes. + * reprobe a card already found by the PCI probes. */ struct bt_isa_port bt_isa_ports[] = { @@ -313,7 +312,6 @@ bt_port_probe(device_t dev, struct bt_probe_info *info) return (1); } } else { - /* VL/EISA/PCI DMA */ info->drq = -1; } switch (config_data.irq) { @@ -482,7 +480,6 @@ bt_fetch_adapter_info(device_t dev) * BT-542B/742A (revision H) * 2.xx BusLogic "A" Series Host Adapters: * BT-542B/742A (revision G and below) - * 0.xx AMI FastDisk VLB/EISA BusLogic Clone Host Adapter */ length_param = sizeof(esetup_info); error = bt_cmd(bt, BOP_INQUIRE_ESETUP_INFO, &length_param, /*parmlen*/1, @@ -499,19 +496,6 @@ bt_fetch_adapter_info(device_t dev) if (esetup_info.bus_type == 'A' && bt->firmware_ver[0] == '2') { snprintf(bt->model, sizeof(bt->model), "542B"); - } else if (esetup_info.bus_type == 'E' - && bt->firmware_ver[0] == '2') { - - /* - * The 742A seems to object if its mailboxes are - * allocated above the 16MB mark. - */ - bt->mailbox_addrlimit = BUS_SPACE_MAXADDR_24BIT; - snprintf(bt->model, sizeof(bt->model), "742A"); - } else if (esetup_info.bus_type == 'E' - && bt->firmware_ver[0] == '0') { - /* AMI FastDisk EISA Series 441 0.x */ - snprintf(bt->model, sizeof(bt->model), "747A"); } else { ha_model_data_t model_data; int i; diff --git a/sys/dev/buslogic/bt_eisa.c b/sys/dev/buslogic/bt_eisa.c deleted file mode 100644 index e68d2f77be28..000000000000 --- a/sys/dev/buslogic/bt_eisa.c +++ /dev/null @@ -1,357 +0,0 @@ -/*- - * Product specific probe and attach routines for: - * Buslogic BT74x SCSI controllers - * - * Copyright (c) 1995, 1998, 1999 Justin T. Gibbs - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice immediately at the beginning of the file, without modification, - * this list of conditions, and the following disclaimer. - * 2. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR - * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - */ - -#include -__FBSDID("$FreeBSD$"); - -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include - -#include - -#define EISA_DEVICE_ID_BUSLOGIC_74X_B 0x0ab34201 -#define EISA_DEVICE_ID_BUSLOGIC_74X_C 0x0ab34202 -#define EISA_DEVICE_ID_SDC3222B 0x0ab34281 -#define EISA_DEVICE_ID_SDC3222F 0x0ab34781 -#define EISA_DEVICE_ID_SDC3222WS 0x0ab34981 -#define EISA_DEVICE_ID_SDC3222WB 0x0ab34982 -#define EISA_DEVICE_ID_AMI_4801 0x05a94801 - -#define BT_IOSIZE 0x04 /* Move to central header */ -#define BT_EISA_IOSIZE 0x100 -#define BT_EISA_SLOT_OFFSET 0xc00 - -#define EISA_IOCONF 0x08C -#define PORTADDR 0x07 -#define PORT_330 0x00 -#define PORT_334 0x01 -#define PORT_230 0x02 -#define PORT_234 0x03 -#define PORT_130 0x04 -#define PORT_134 0x05 -#define IRQ_CHANNEL 0xe0 -#define INT_11 0x40 -#define INT_10 0x20 -#define INT_15 0xa0 -#define INT_12 0x60 -#define INT_14 0x80 -#define INT_9 0x00 - -#define EISA_IRQ_TYPE 0x08D -#define LEVEL 0x40 - -/* Definitions for the AMI Series 48 controller */ -#define AMI_EISA_IOSIZE 0x500 /* Two separate ranges?? */ -#define AMI_EISA_SLOT_OFFSET 0x800 -#define AMI_EISA_IOCONF 0x000 -#define AMI_DMA_CHANNEL 0x03 -#define AMI_IRQ_CHANNEL 0x1c -#define AMI_INT_15 0x14 -#define AMI_INT_14 0x10 -#define AMI_INT_12 0x0c -#define AMI_INT_11 0x00 -#define AMI_INT_10 0x08 -#define AMI_INT_9 0x04 -#define AMI_BIOS_ADDR 0xe0 - -#define AMI_EISA_IOCONF1 0x001 -#define AMI_PORTADDR 0x0e -#define AMI_PORT_334 0x08 -#define AMI_PORT_330 0x00 -#define AMI_PORT_234 0x0c -#define AMI_PORT_230 0x04 -#define AMI_PORT_134 0x0a -#define AMI_PORT_130 0x02 -#define AMI_IRQ_LEVEL 0x01 - - -#define AMI_MISC2_OPTIONS 0x49E -#define AMI_ENABLE_ISA_DMA 0x08 - -static const char *bt_match(eisa_id_t type); - -static int -bt_eisa_alloc_resources(device_t dev) -{ - struct bt_softc *bt = device_get_softc(dev); - int rid; - struct resource *port; - struct resource *irq; - int shared; - - /* - * XXX assumes that the iospace ranges are sorted in increasing - * order. - */ - rid = 0; - port = bus_alloc_resource_any(dev, SYS_RES_IOPORT, &rid, RF_ACTIVE); - if (!port) - return (ENOMEM); - - bt_init_softc(dev, port, 0, 0); - - if (eisa_get_irq(dev) != -1) { - shared = bt->level_trigger_ints ? RF_SHAREABLE : 0; - rid = 0; - irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, - shared | RF_ACTIVE); - if (!irq) { - if (port) - bus_release_resource(dev, SYS_RES_IOPORT, - 0, port); - return (ENOMEM); - } - } else - irq = NULL; - bt->irq = irq; - - return (0); -} - -static void -bt_eisa_release_resources(device_t dev) -{ - struct bt_softc *bt = device_get_softc(dev); - - if (bt->port) - bus_release_resource(dev, SYS_RES_IOPORT, 0, bt->port); - if (bt->irq) - bus_release_resource(dev, SYS_RES_IRQ, 0, bt->irq); - bt_free_softc(dev); -} - -static const char* -bt_match(eisa_id_t type) -{ - switch(type) { - case EISA_DEVICE_ID_BUSLOGIC_74X_B: - return ("Buslogic 74xB SCSI host adapter"); - case EISA_DEVICE_ID_BUSLOGIC_74X_C: - return ("Buslogic 74xC SCSI host adapter"); - case EISA_DEVICE_ID_SDC3222B: - return ("Storage Dimensions SDC3222B SCSI host adapter"); - case EISA_DEVICE_ID_SDC3222F: - return ("Storage Dimensions SDC3222F SCSI host adapter"); - case EISA_DEVICE_ID_SDC3222WS: - return ("Storage Dimensions SDC3222WS SCSI host adapter"); - case EISA_DEVICE_ID_SDC3222WB: - return ("Storage Dimensions SDC3222WB SCSI host adapter"); - case EISA_DEVICE_ID_AMI_4801: - return ("AMI Series 48 SCSI host adapter"); - default: - break; - } - return (NULL); -} - -static int -bt_eisa_probe(device_t dev) -{ - const char *desc; - u_long iobase; - struct bt_probe_info info; - u_long port; - u_long iosize; - u_int ioconf; - int result; - int shared; - - desc = bt_match(eisa_get_id(dev)); - if (!desc) - return (ENXIO); - device_set_desc(dev, desc); - - iobase = (eisa_get_slot(dev) * EISA_SLOT_SIZE); - if (eisa_get_id(dev) == EISA_DEVICE_ID_AMI_4801) { - u_int ioconf1; - - iobase += AMI_EISA_SLOT_OFFSET; - iosize = AMI_EISA_IOSIZE; - ioconf1 = inb(iobase + AMI_EISA_IOCONF1); - /* Determine "ISA" I/O port */ - switch (ioconf1 & AMI_PORTADDR) { - case AMI_PORT_330: - port = 0x330; - break; - case AMI_PORT_334: - port = 0x334; - break; - case AMI_PORT_230: - port = 0x230; - break; - case AMI_PORT_234: - port = 0x234; - break; - case AMI_PORT_134: - port = 0x134; - break; - case AMI_PORT_130: - port = 0x130; - break; - default: - /* Disabled */ - printf("bt: AMI EISA Adapter at " - "slot %d has a disabled I/O " - "port. Cannot attach.\n", - eisa_get_slot(dev)); - return (ENXIO); - } - shared = (inb(iobase + AMI_EISA_IOCONF1) & AMI_IRQ_LEVEL) ? - EISA_TRIGGER_LEVEL : EISA_TRIGGER_EDGE; - } else { - iobase += BT_EISA_SLOT_OFFSET; - iosize = BT_EISA_IOSIZE; - - ioconf = inb(iobase + EISA_IOCONF); - /* Determine "ISA" I/O port */ - switch (ioconf & PORTADDR) { - case PORT_330: - port = 0x330; - break; - case PORT_334: - port = 0x334; - break; - case PORT_230: - port = 0x230; - break; - case PORT_234: - port = 0x234; - break; - case PORT_130: - port = 0x130; - break; - case PORT_134: - port = 0x134; - break; - default: - /* Disabled */ - printf("bt: Buslogic EISA Adapter at " - "slot %d has a disabled I/O " - "port. Cannot attach.\n", - eisa_get_slot(dev)); - return (ENXIO); - } - shared = (inb(iobase + EISA_IRQ_TYPE) & LEVEL) ? - EISA_TRIGGER_LEVEL : EISA_TRIGGER_EDGE; - } - bt_mark_probed_iop(port); - - /* Tell parent where our resources are going to be */ - eisa_add_iospace(dev, iobase, iosize, RESVADDR_NONE); - eisa_add_iospace(dev, port, BT_IOSIZE, RESVADDR_NONE); - - /* And allocate them */ - bt_eisa_alloc_resources(dev); - - if (bt_port_probe(dev, &info) != 0) { - printf("bt_eisa_probe: Probe failed for " - "card at slot 0x%x\n", eisa_get_slot(dev)); - result = ENXIO; - } else { - eisa_add_intr(dev, info.irq, shared); - result = BUS_PROBE_DEFAULT; - } - bt_eisa_release_resources(dev); - - return (result); -} - -static int -bt_eisa_attach(device_t dev) -{ - struct bt_softc *bt = device_get_softc(dev); - - /* Allocate resources */ - bt_eisa_alloc_resources(dev); - - /* Allocate a dmatag for our SCB DMA maps */ - /* XXX Should be a child of the PCI bus dma tag */ - if (bus_dma_tag_create( /* parent */ NULL, - /* alignment */ 1, - /* boundary */ 0, - /* lowaddr */ BUS_SPACE_MAXADDR_32BIT, - /* highaddr */ BUS_SPACE_MAXADDR, - /* filter */ NULL, - /* filterarg */ NULL, - /* maxsize */ BUS_SPACE_MAXSIZE_32BIT, - /* nsegments */ ~0, - /* maxsegsz */ BUS_SPACE_MAXSIZE_32BIT, - /* flags */ 0, - /* lockfunc */ NULL, - /* lockarg, */ NULL, - &bt->parent_dmat) != 0) { - bt_eisa_release_resources(dev); - return (ENOMEM); - } - - /* - * Now that we know we own the resources we need, do the full - * card initialization. - */ - if (bt_probe(dev) || bt_fetch_adapter_info(dev) || bt_init(dev)) { - bt_eisa_release_resources(dev); - return (ENXIO); - } - - /* Attach sub-devices - always succeeds (sets up intr) */ - bt_attach(dev); - - return 0; -} - -static device_method_t bt_eisa_methods[] = { - /* Device interface */ - DEVMETHOD(device_probe, bt_eisa_probe), - DEVMETHOD(device_attach, bt_eisa_attach), - - { 0, 0 } -}; - -static driver_t bt_eisa_driver = { - "bt", - bt_eisa_methods, - sizeof(struct bt_softc), -}; - -static devclass_t bt_devclass; - -DRIVER_MODULE(bt, eisa, bt_eisa_driver, bt_devclass, 0, 0); -MODULE_DEPEND(bt, eisa, 1, 1, 1); diff --git a/sys/dev/buslogic/bt_isa.c b/sys/dev/buslogic/bt_isa.c index ce121c32ae29..ce6f273ed85f 100644 --- a/sys/dev/buslogic/bt_isa.c +++ b/sys/dev/buslogic/bt_isa.c @@ -150,7 +150,7 @@ bt_isa_probe(device_t dev) /* * Ensure this port has not already been claimed already - * by a PCI, EISA or ISA adapter. + * by a PCI, ISA adapter. */ if (bt_check_probed_iop(ioport) != 0) continue; diff --git a/sys/dev/buslogic/btreg.h b/sys/dev/buslogic/btreg.h index a22c5aab6b0b..b7ca500c0f4c 100644 --- a/sys/dev/buslogic/btreg.h +++ b/sys/dev/buslogic/btreg.h @@ -4,7 +4,6 @@ * attach routines can be found in: * sys/dev/buslogic/bt_isa.c BT-54X, BT-445 cards * sys/dev/buslogic/bt_mca.c BT-64X, SDC3211B, SDC3211F - * sys/dev/buslogic/bt_eisa.c BT-74X, BT-75x cards, SDC3222F * sys/dev/buslogic/bt_pci.c BT-946, BT-948, BT-956, BT-958 cards * * Copyright (c) 1998, 1999 Justin T. Gibbs. @@ -238,15 +237,6 @@ typedef struct { sync : 1; } targ_syncinfo_t; -typedef enum { - HAB_ISA = 'A', - HAB_MCA = 'B', - HAB_EISA = 'C', - HAB_NUBUS = 'D', - HAB_VESA = 'E', - HAB_PCI = 'F' -} ha_type_t; - typedef struct { u_int8_t initiate_sync : 1, parity_enable : 1,