system/freebsd-src
system/freebsd-src
1
0
Fork 0
mirror of https://github.com/freebsd/freebsd-src synced 2024-07-21 18:27:22 +00:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity

mfiutil.8: Fix some mandoc warnings

Browse source 
- new sentence, new line
- no blank before trailing delimiter

MFC after:	3 days
This commit is contained in:
Gordon Bergling 2022-08-07 17:24:48 +02:00
parent 816ca3d10f
commit 75f8dcc831
1 changed files with 13 additions and 8 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

21
usr.sbin/mfiutil/mfiutil.8
View file

@ -326,7 +326,8 @@ the controller for each low-level request.
The default is 15 events.
.Pp
By default, matching event log entries from the previous shutdown up to the
present are displayed. This range can be adjusted via the
present are displayed.
This range can be adjusted via the
.Ar start
and
.Ar stop
@ -383,7 +384,8 @@ The firmware should kick off an array rebuild on its own if a failed drive
is marked as a rebuild drive.
.It Cm syspd Ar drive
Present the drive to the host operating system as a disk SYSPD block device in
the format /dev/mfisyspdX. Clear this flag with
the format /dev/mfisyspdX.
Clear this flag with
.Cm good
.Ar drive
.It Cm drive progress Ar drive
@ -524,7 +526,7 @@ Creates a single volume by concatenating all of the drives in the single drive
list.
.El
.Pp
.Sy Note:
.Sy Note :
Not all volume types are supported by all controllers.
.Pp
If the
@ -602,7 +604,8 @@ Start a patrol read operation.
.It Cm stop patrol
Stop a currently running patrol read operation.
.It Cm foreign scan
Scan for foreign configurations and display the number found. The
Scan for foreign configurations and display the number found.
The
.Ar config
argument for the commands below takes the form of a number from 0 to the total
configurations found.
@ -645,8 +648,8 @@ Update battery backup unit (BBU) properties related to battery relearning.
The following settings are configurable:
.Bl -tag -width indent
.It Cm learn-delay
Add a delay to the next scheduled battery relearn event. This setting is
given in hours and must lie in the range of 0 to 255.
Add a delay to the next scheduled battery relearn event.
This setting is given in hours and must lie in the range of 0 to 255.
.It Cm autolearn-mode
Enable or disable automatic periodic battery relearning.
The setting may be set to
@ -659,7 +662,8 @@ Mode 0 enables periodic relearning, mode 1 disables it, and mode 2 disables
it and logs a warning to the event log when it detects that a battery relearn
should be performed.
.It Cm bbu-mode
Set the BBU's mode of operation. This setting is not supported by all BBUs.
Set the BBU's mode of operation.
This setting is not supported by all BBUs.
Where it is supported, the possible values are the integers between 1 and 5
inclusive.
Modes 1, 2 and 3 enable a transparent learn cycle, whereas modes 4 and 5 do not.
@ -670,7 +674,8 @@ With no arguments display the rate of rebuild (percentage)a for volumes.
With an integer argument (0-100), set that value as the new rebuild rate for volumes.
.It Cm ctrlprop Ar alarm Op Ar 0/1
With no arguments display the current alarm enable/disable status.
With a 0, disable alarms. With a 1, enable alarms.
With a 0, disable alarms.
With a 1, enable alarms.
.El
.Sh EXAMPLES
Configure the cache for volume mfid0 to cache only writes: