mx25l.4: Document the correct disk device path

This was true at time of commit, but the path was changed 2 weeks later
to just be the /dev/flash/spiN name, without updating the manpage.

Reported by:	David Gilbert <dgilbert@daveg.ca>
Fixes:		68dd779577 ("Give the mx25l device sole ownership of the name /dev/flash/spi* ...")
MFC after:	1 week
This commit is contained in:
Jessica Clarke 2024-06-11 17:43:18 +01:00
parent dd0e5c02ab
commit 703768a235

View File

@ -22,7 +22,7 @@
.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
.\"
.Dd February 26, 2019
.Dd June 11, 2024
.Dt MX25L 4
.Os
.Sh NAME
@ -60,7 +60,7 @@ such as block size, sector size, and device capacity.
When a supported device is found, the
.Nm
driver creates a disk device and makes it accessible at
.Pa /dev/flash/mx25l? .
.Pa /dev/flash/spi? .
The new disk device is then tasted by the available
.Xr geom 4
modules as with any disk device.
@ -189,13 +189,9 @@ Set the high bit (1 << 31) to invert the logic level of the chip select line.
The SPI mode (0-3) to use when communicating with this device.
.El
.Sh FILES
.Bl -tag -width /dev/flash/mx25l?
.It Pa /dev/flash/mx25l?
Provides read/write access to the storage device.
.Bl -tag -width /dev/flash/spi?
.It Pa /dev/flash/spi?
An alias for the
.Pa /dev/mx25l?
device, for backwards compatibility with older versions of the driver.
Provides read/write access to the storage device.
.El
.Sh SEE ALSO
.Xr fdt 4 ,