diff --git a/sys/conf/NOTES b/sys/conf/NOTES index d241e569c0dd..b11dad1654a6 100644 --- a/sys/conf/NOTES +++ b/sys/conf/NOTES @@ -2,7 +2,7 @@ # LINT -- config file for checking all the sources, tries to pull in # as much of the source tree as it can. # -# $Id: LINT,v 1.492 1998/10/30 20:49:14 des Exp $ +# $Id: LINT,v 1.493 1998/10/31 14:26:21 peter Exp $ # # NB: You probably don't want to try running a kernel built from this # file. Instead, you should start from GENERIC, and add options from @@ -1491,6 +1491,12 @@ device vx0 device xl0 device fpa0 device meteor0 + +# Brooktree driver has been ported to the new I2C framework. Thus, +# you'll need at least iicbus, iicbb and smbus. iic/smb are only needed if you +# want to control other I2C slaves connected to the external connector of +# some cards. +# device bktr0 # @@ -1531,7 +1537,8 @@ options POWERFAIL_NMI # make it beep instead of panicing # smb standard io # # Supported interfaces: -# iicsmb I2C to SMB bridge +# iicsmb I2C to SMB bridge with any iicbus interface +# bktr brooktree848 I2C hardware interface # controller smbus0 @@ -1549,8 +1556,13 @@ device smb0 at smbus? # # Supported interfaces: # pcf Philips PCF8584 ISA-bus controller +# bktr brooktree848 I2C software interface +# +# Other: +# iicbb generic I2C bit-banging code (needed by lpbb, bktr) # controller iicbus0 +controller iicbb0 device ic0 at iicbus? device iic0 at iicbus? @@ -1574,6 +1586,7 @@ controller pcf0 at isa? port 0x320 net irq 5 # plip Parallel network interface # ppi General-purpose I/O ("Geek Port") # pps Pulse per second Timing Interface +# lpbb Philips official parallel port I2C bit-banging interface # # Supported interfaces: # ppc ISA-bus parallel port interfaces. @@ -1584,6 +1597,7 @@ device nlpt0 at ppbus? device plip0 at ppbus? device ppi0 at ppbus? device pps0 at ppbus? +device lpbb0 at ppbus? controller ppc0 at isa? disable port ? tty irq 7 diff --git a/sys/i386/conf/LINT b/sys/i386/conf/LINT index d241e569c0dd..b11dad1654a6 100644 --- a/sys/i386/conf/LINT +++ b/sys/i386/conf/LINT @@ -2,7 +2,7 @@ # LINT -- config file for checking all the sources, tries to pull in # as much of the source tree as it can. # -# $Id: LINT,v 1.492 1998/10/30 20:49:14 des Exp $ +# $Id: LINT,v 1.493 1998/10/31 14:26:21 peter Exp $ # # NB: You probably don't want to try running a kernel built from this # file. Instead, you should start from GENERIC, and add options from @@ -1491,6 +1491,12 @@ device vx0 device xl0 device fpa0 device meteor0 + +# Brooktree driver has been ported to the new I2C framework. Thus, +# you'll need at least iicbus, iicbb and smbus. iic/smb are only needed if you +# want to control other I2C slaves connected to the external connector of +# some cards. +# device bktr0 # @@ -1531,7 +1537,8 @@ options POWERFAIL_NMI # make it beep instead of panicing # smb standard io # # Supported interfaces: -# iicsmb I2C to SMB bridge +# iicsmb I2C to SMB bridge with any iicbus interface +# bktr brooktree848 I2C hardware interface # controller smbus0 @@ -1549,8 +1556,13 @@ device smb0 at smbus? # # Supported interfaces: # pcf Philips PCF8584 ISA-bus controller +# bktr brooktree848 I2C software interface +# +# Other: +# iicbb generic I2C bit-banging code (needed by lpbb, bktr) # controller iicbus0 +controller iicbb0 device ic0 at iicbus? device iic0 at iicbus? @@ -1574,6 +1586,7 @@ controller pcf0 at isa? port 0x320 net irq 5 # plip Parallel network interface # ppi General-purpose I/O ("Geek Port") # pps Pulse per second Timing Interface +# lpbb Philips official parallel port I2C bit-banging interface # # Supported interfaces: # ppc ISA-bus parallel port interfaces. @@ -1584,6 +1597,7 @@ device nlpt0 at ppbus? device plip0 at ppbus? device ppi0 at ppbus? device pps0 at ppbus? +device lpbb0 at ppbus? controller ppc0 at isa? disable port ? tty irq 7 diff --git a/sys/i386/conf/NOTES b/sys/i386/conf/NOTES index d241e569c0dd..b11dad1654a6 100644 --- a/sys/i386/conf/NOTES +++ b/sys/i386/conf/NOTES @@ -2,7 +2,7 @@ # LINT -- config file for checking all the sources, tries to pull in # as much of the source tree as it can. # -# $Id: LINT,v 1.492 1998/10/30 20:49:14 des Exp $ +# $Id: LINT,v 1.493 1998/10/31 14:26:21 peter Exp $ # # NB: You probably don't want to try running a kernel built from this # file. Instead, you should start from GENERIC, and add options from @@ -1491,6 +1491,12 @@ device vx0 device xl0 device fpa0 device meteor0 + +# Brooktree driver has been ported to the new I2C framework. Thus, +# you'll need at least iicbus, iicbb and smbus. iic/smb are only needed if you +# want to control other I2C slaves connected to the external connector of +# some cards. +# device bktr0 # @@ -1531,7 +1537,8 @@ options POWERFAIL_NMI # make it beep instead of panicing # smb standard io # # Supported interfaces: -# iicsmb I2C to SMB bridge +# iicsmb I2C to SMB bridge with any iicbus interface +# bktr brooktree848 I2C hardware interface # controller smbus0 @@ -1549,8 +1556,13 @@ device smb0 at smbus? # # Supported interfaces: # pcf Philips PCF8584 ISA-bus controller +# bktr brooktree848 I2C software interface +# +# Other: +# iicbb generic I2C bit-banging code (needed by lpbb, bktr) # controller iicbus0 +controller iicbb0 device ic0 at iicbus? device iic0 at iicbus? @@ -1574,6 +1586,7 @@ controller pcf0 at isa? port 0x320 net irq 5 # plip Parallel network interface # ppi General-purpose I/O ("Geek Port") # pps Pulse per second Timing Interface +# lpbb Philips official parallel port I2C bit-banging interface # # Supported interfaces: # ppc ISA-bus parallel port interfaces. @@ -1584,6 +1597,7 @@ device nlpt0 at ppbus? device plip0 at ppbus? device ppi0 at ppbus? device pps0 at ppbus? +device lpbb0 at ppbus? controller ppc0 at isa? disable port ? tty irq 7