Scheduled mdoc(7) sweep.

svn path=/head/; revision=140063

usr.sbin/bluetooth/l2ping/l2ping.8

@@ -44,7 +44,7 @@ The
 .Nm
 utility uses L2CAP
 .Dv ECHO_REQUEST
-datagram to elicit a L2CAP
+datagram to elicit an L2CAP
 .Dv ECHO_RESPONSE
 datagram from a remote device.
 .Pp
@@ -77,7 +77,7 @@ This option is ignored if
 has been specified.
 .It Fl n
 Numeric output only.
-No attempt will be made to lookup symbolic names for host addresses.
+No attempt will be made to look up symbolic names for host addresses.
 .It Fl S Ar source
 Specify the local device which should be used to send L2CAP
 .Dv ECHO_REQUEST
@@ -92,7 +92,8 @@ Specify the number of payload bytes to be sent.
 The default size is 44 bytes.
 It is calculated as minimum L2CAP MTU (48 bytes) minus the size of the L2CAP
 signalling command header (4 bytes).
-The maximum size is 65531 bytes. Is is calculated as maximum L2CAP MTU
+The maximum size is 65531 bytes.
+Is is calculated as maximum L2CAP MTU
 (65535 bytes) minus four bytes of payload reserved for
 .Nm
 internal use.

usr.sbin/bluetooth/rfcomm_pppd/rfcomm_pppd.8

@@ -132,16 +132,16 @@ In both client and server modes, this required option specifies which
 .Xr ppp 8
 label will be used.
 .It Fl S
-In the server mode register the Serial Port (SP) service in addition to the
+In the server mode, register the Serial Port (SP) service in addition to the
 LAN Access Using PPP (LAN) service.
-It appears that some cell phones are using so called
-.Dq callback mechanism .
-In this scenario the user is trying to connect his cell phone to the Internet,
-and, user's host computer is acting as the gateway server.
+It appears that some cell phones are using the so-called
+.Dq "callback mechanism" .
+In this scenario, the user is trying to connect his cell phone to the Internet,
+and user's host computer is acting as the gateway server.
 It seems that it is not possible to tell the phone to just connect and start
 using the LAN service.
-Instead the user's host computer must
-.Dq jump start
+Instead, the user's host computer must
+.Dq "jump start"
 the phone by connecting to the phone's SP service.
 What happens next is the phone kills the existing connection and opens another
 connection back to the user's host computer.

usr.sbin/eeprom/eeprom.8

@@ -257,7 +257,7 @@ If set to
 all Ethernet devices with FCode will use the system default MAC address.
 If set to
 .Dq Li true ,
-Ethernet devices with FCode that contains an unique MAC address will use it
+Ethernet devices with FCode that contains a unique MAC address will use it
 rather than the system's default MAC address.
 Default:
 .Dq Li false .

usr.sbin/fwcontrol/fwcontrol.8

@@ -104,7 +104,8 @@ Ports Collection.
 .It Fl S Ar filename
 Send a DV file as isochronous stream.
 .It Fl m Ar EUI64 | hostname
-Set default fwmem target. Hostname will be converted to EUI64 using
+Set default fwmem target.
+Hostname will be converted to EUI64 using
 .Xr eui64 5 .
 .El
 .Sh EXAMPLES

usr.sbin/jail/jail.8

@@ -42,7 +42,7 @@
 .Sh SYNOPSIS
 .Nm
 .Op Fl i
-.Op Fl l Fl u Ar username | Fl U Ar username
+.Op Fl l u Ar username | Fl U Ar username
 .Ar path hostname ip-number command ...
 .Sh DESCRIPTION
 The
@@ -56,9 +56,7 @@ Output the jail identifier of the newly created jail.
 .It Fl l
 Run program in the clean environment.
 The environment is discarded except for
-.Ev HOME ,
-.Ev SHELL ,
-.Ev TERM
+.Ev HOME , SHELL , TERM
 and
 .Ev USER .
 .Ev HOME
@@ -68,7 +66,7 @@ are set to the target login's default values.
 .Ev USER
 is set to the target login.
 .Ev TERM
-is imported from your current environment.
+is imported from the current environment.
 The environment variables from the login class capability database for the
 target login are also set.
 .It Fl u Ar username

usr.sbin/lptcontrol/lptcontrol.8

@@ -69,7 +69,7 @@ printer control devices
 .It Pa /sys/i386/conf/GENERIC
 kernel configuration file
 .It Pa /boot/device.hints
-Device hints for the parallel port chipset driver,
+device hints for the parallel port chipset driver,
 .Xr ppc 4
 .El
 .Sh BUGS

usr.sbin/moused/moused.8

@@ -228,7 +228,7 @@ Specifies at which level
 .Nm
 should operate the mouse driver.
 Refer to
-.Em Operation Levels
+.Sx Operation Levels
 in
 .Xr psm 4
 for more information on this.

usr.sbin/ndiscvt/ndiscvt.8

@@ -153,52 +153,51 @@ Generate both an
 file and
 an
 .Pa ndis_driver.data.o
-file. The latter file will contain a copy of the
+file.
+The latter file will contain a copy of the
 .Tn Windows\[rg]
 .Pa .SYS
 driver image encoded as a
 .Fx
 ELF object file
-.Po
-created with
-.Xr objcopy 1
-.Pc .
+(created with
+.Xr objcopy 1 ) .
 Turning the
 .Tn Windows\[rg]
 driver image directly into an object code file saves disk space
 and compilation time.
 .It Fl f Ar firmfile
 A few NDIS drivers come with additional files that the core
-driver module will load during initialization time. Typically,
+driver module will load during initialization time.
+Typically,
 these files contain firmware which the driver will transfer to
-the device in order to make it fully operational. In
+the device in order to make it fully operational.
+In
 .Tn Windows\[rg] ,
 these files are usually just copied into one of the system
 directories along with the driver itself.
 .Pp
 In
 .Fx
-there are two mechanism for loading these files. If the driver
+there are two mechanism for loading these files.
+If the driver
 is built as a loadable kernel module which is loaded after the
 kernel has finished booting
-.Po
-and after the root filesystem has
-been mounted
-.Pc ,
+(and after the root file system has
+been mounted),
 the extra files can simply be copied to the
 .Pa /compat/ndis
 directory, and they will be loaded into the kernel on demand when the
 the driver needs them.
 .Pp
 If however the driver is required to bootstrap the system
-.Po
-i.e. if
+(i.e., if
 the NDIS-based network interface is to be used for diskless/PXE
-booting
-.Pc ,
+booting),
 the files need to be pre-loaded by the bootstrap
 loader in order to be accessible, since the driver will need them
-before the root filesystem has been mounted. However, the bootstrap
+before the root file system has been mounted.
+However, the bootstrap
 loader is only able to load files that are shared
 .Fx
 binary objects.
@@ -208,20 +207,19 @@ The
 flag can be used to convert an arbitrary file
 .Ar firmfile
 into shared object format
-.Po
-the actual conversion is done using
+(the actual conversion is done using
 the
 .Xr objcopy 1
 and
 .Xr ld 1
-commands
-.Pc .
+commands).
 The resulting files can then be copied to the
 .Pa /boot/kernel
 directory, and can be pre-loaded directly from the boot loader
 prompt, or automatically by editing the
 .Xr loader.conf 5
-file. If desired, the files can also be loaded into memory
+file.
+If desired, the files can also be loaded into memory
 at runtime using the
 .Xr kldload 8
 command.
@@ -232,7 +230,8 @@ code will first search for a loaded kernel module that matches the
 name specified in the open request, and if that fails, it will then
 try to open the file from the
 .Pa /compat/ndis
-directory as well. Note that during kernel bootstrap, the ability
+directory as well.
+Note that during kernel bootstrap, the ability
 to open files from
 .Pa /compat/ndis
 is disabled: only the module search will be performed.
@@ -242,32 +241,30 @@ When using the
 flag,
 .Nm
 will generate both a relocatable object file
-.Po
-with a
+(with a
 .Pa .o
-extension
-.Pc
+extension)
 and a shared object file
-.Po
-with a
+(with a
 .Pa .ko
-extension
-.Pc
-. The shared object is the one that should be placed in
+extension).
+The shared object is the one that should be placed in
 the
 .Pa /boot/kernel
-directory. The relocatable object file is useful if the user wishes
+directory.
+The relocatable object file is useful if the user wishes
 to create a completely static kernel image: the object file can be
-linked into the kernel directly along with the driver itself. Some
+linked into the kernel directly along with the driver itself.
+Some
 editing of the kernel configuration files will be necessary in order
 to have the extra object included in the build.
 .El
 .Sh SEE ALSO
-.Xr kldload 8 ,
 .Xr ld 1 ,
+.Xr objcopy 1 ,
 .Xr ndis 4 ,
-.Xr ndisapi 9 ,
-.Xr objcopy 1
+.Xr kldload 8 ,
+.Xr ndisapi 9
 .Sh HISTORY
 The
 .Nm

usr.sbin/pkg_install/version/pkg_version.1

@@ -23,7 +23,7 @@
 .\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 .\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 .\"
-.\"	$FreeBSD$
+.\" $FreeBSD$
 .Dd June 29, 2004
 .Dt PKG_VERSION 1
 .Os
@@ -41,9 +41,9 @@
 .Oc
 .Op Ar index
 .Nm
-.Op Fl t Ar version1 version2
+.Fl t Ar version1 version2
 .Nm
-.Op Fl T Ar pkgname pattern
+.Fl T Ar pkgname pattern
 .Sh DESCRIPTION
 The
 .Nm
@@ -139,14 +139,14 @@ to the shell, it is best to quote
 with single quotes.
 .It Fl q
 Enable quiet output.
-Quiet output precludes printing the the
+Quiet output precludes printing the
 .Ar limchar
 when used with
 .Fl l
 or
 .Fl L .
 This is useful when used as the input to
-.Xr portupdate 8 .
+.Xr portupgrade 8 .
 .It Fl s
 Limit the output to those packages whose names match a given
 .Ar string .
@@ -205,7 +205,7 @@ option has been deprecated and is no longer supported.
 .Xr pkg_create 1 ,
 .Xr pkg_delete 1 ,
 .Xr pkg_info 1 ,
-.Xr portupdate 8
+.Xr portupgrade 8
 .Sh FILES
 .Bl -tag -width /usr/ports/INDEX-6 -compact
 .It Pa /usr/ports/INDEX-6

usr.sbin/ppp/ppp.8.m4

@@ -828,7 +828,7 @@ If you want to include a literal
 .Dq $
 or
 .Dq ~
-character in a command or argument, enclose them in double quotes, e.g.
+character in a command or argument, enclose them in double quotes, e.g.,
 .Bd -literal -offset indent
 set password "pa$ss~word"
 .Ed

usr.sbin/syslogd/syslogd.8

@@ -40,10 +40,7 @@
 .Op Fl a Ar allowed_peer
 .Op Fl b Ar bind_address
 .Op Fl f Ar config_file
-.Oo
-.Fl l Op Ar mode: Ns
-.Ar path
-.Oc
+.Op Fl l Oo Ar mode : Oc Ns Ar path
 .Op Fl m Ar mark_interval
 .Op Fl P Ar pid_file
 .Op Fl p Ar log_socket