system/freebsd-src
system/freebsd-src
1
0
Fork 0
mirror of https://github.com/freebsd/freebsd-src synced 2024-07-24 03:37:16 +00:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
freebsd-src/sbin/ipfw/nat64lsn.c

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

886 lines
24 KiB
C
Raw Normal View History

Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
/*-
spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch up to that fact and revert to their recommended match of BSD-2-Clause. Discussed with: pfg MFC After: 3 days Sponsored by: Netflix
2023-05-10 15:40:58 +00:00
* SPDX-License-Identifier: BSD-2-Clause
Add SPDX-License-Identifier and update year in copyright. MFC after: 1 month
2019-03-18 10:50:32 +00:00
*
* Copyright (c) 2015-2019 Yandex LLC
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
* Copyright (c) 2015-2016 Alexander V. Chernikov <melifaro@FreeBSD.org>
Add SPDX-License-Identifier and update year in copyright. MFC after: 1 month
2019-03-18 10:50:32 +00:00
* Copyright (c) 2015-2019 Andrey V. Elsukov <ae@FreeBSD.org>
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/types.h>
#include <sys/socket.h>
#include "ipfw2.h"
#include <ctype.h>
#include <err.h>
#include <errno.h>
Make statistics nat64lsn, nat64stl an nptv6 output netstat-like: "@value @description" and fix build due to -Wformat errors.
2016-08-14 13:17:55 +00:00
#include <inttypes.h>
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
#include <netdb.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sysexits.h>
#include <net/if.h>
#include <netinet/in.h>
#include <netinet/ip_fw.h>
#include <netinet6/ip_fw_nat64.h>
#include <arpa/inet.h>
static void nat64lsn_fill_ntlv(ipfw_obj_ntlv *ntlv, const char *name,
uint8_t set);
typedef int (nat64lsn_cb_t)(ipfw_nat64lsn_cfg *cfg, const char *name,
uint8_t set);
static int nat64lsn_foreach(nat64lsn_cb_t *f, const char *name, uint8_t set,
int sort);
static void nat64lsn_create(const char *name, uint8_t set, int ac, char **av);
static void nat64lsn_config(const char *name, uint8_t set, int ac, char **av);
static void nat64lsn_destroy(const char *name, uint8_t set);
static void nat64lsn_stats(const char *name, uint8_t set);
static void nat64lsn_reset_stats(const char *name, uint8_t set);
static int nat64lsn_show_cb(ipfw_nat64lsn_cfg *cfg, const char *name,
uint8_t set);
static int nat64lsn_destroy_cb(ipfw_nat64lsn_cfg *cfg, const char *name,
uint8_t set);
static int nat64lsn_states_cb(ipfw_nat64lsn_cfg *cfg, const char *name,
uint8_t set);
static struct _s_x nat64cmds[] = {
{ "create", TOK_CREATE },
{ "config", TOK_CONFIG },
{ "destroy", TOK_DESTROY },
{ "list", TOK_LIST },
{ "show", TOK_LIST },
{ "stats", TOK_STATS },
{ NULL, 0 }
};
static uint64_t
nat64lsn_print_states(void *buf)
{
char s[INET6_ADDRSTRLEN], a[INET_ADDRSTRLEN], f[INET_ADDRSTRLEN];
ipfw(8): Fix most warnings with the default WARNS level. - Add missing const and static qualifiers. - Avoid shadowing the global "co" by renaming it to "g_co". - Avoid mixing signedness in loop bound checks. - Leave -Wcast-align warnings disabled for now. Reviewed by: ae, melifaro MFC after: 2 weeks Differential Revision: https://reviews.freebsd.org/D25456
2020-07-13 17:51:04 +00:00
const char *proto;
char sflags[4], *sf;
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
ipfw_obj_header *oh;
ipfw_obj_data *od;
Reapply r345274 with build fixes for 32-bit architectures. Update NAT64LSN implementation: o most of data structures and relations were modified to be able support large number of translation states. Now each supported protocol can use full ports range. Ports groups now are belongs to IPv4 alias addresses, not hosts. Each ports group can keep several states chunks. This is controlled with new `states_chunks` config option. States chunks allow to have several translation states for single alias address and port, but for different destination addresses. o by default all hash tables now use jenkins hash. o ConcurrencyKit and epoch(9) is used to make NAT64LSN lockless on fast path. o one NAT64LSN instance now can be used to handle several IPv6 prefixes, special prefix "::" value should be used for this purpose when instance is created. o due to modified internal data structures relations, the socket opcode that does states listing was changed. Obtained from: Yandex LLC MFC after: 1 month Sponsored by: Yandex LLC
2019-03-19 10:57:03 +00:00
ipfw_nat64lsn_stg_v1 *stg;
ipfw_nat64lsn_state_v1 *ste;
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
uint64_t next_idx;
ipfw(8): Fix most warnings with the default WARNS level. - Add missing const and static qualifiers. - Avoid shadowing the global "co" by renaming it to "g_co". - Avoid mixing signedness in loop bound checks. - Leave -Wcast-align warnings disabled for now. Reviewed by: ae, melifaro MFC after: 2 weeks Differential Revision: https://reviews.freebsd.org/D25456
2020-07-13 17:51:04 +00:00
uint32_t i;
int sz;
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
oh = (ipfw_obj_header *)buf;
od = (ipfw_obj_data *)(oh + 1);
Reapply r345274 with build fixes for 32-bit architectures. Update NAT64LSN implementation: o most of data structures and relations were modified to be able support large number of translation states. Now each supported protocol can use full ports range. Ports groups now are belongs to IPv4 alias addresses, not hosts. Each ports group can keep several states chunks. This is controlled with new `states_chunks` config option. States chunks allow to have several translation states for single alias address and port, but for different destination addresses. o by default all hash tables now use jenkins hash. o ConcurrencyKit and epoch(9) is used to make NAT64LSN lockless on fast path. o one NAT64LSN instance now can be used to handle several IPv6 prefixes, special prefix "::" value should be used for this purpose when instance is created. o due to modified internal data structures relations, the socket opcode that does states listing was changed. Obtained from: Yandex LLC MFC after: 1 month Sponsored by: Yandex LLC
2019-03-19 10:57:03 +00:00
stg = (ipfw_nat64lsn_stg_v1 *)(od + 1);
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
sz = od->head.length - sizeof(*od);
next_idx = 0;
[ipfw] quieten maybe-uninitialized errors in ipfw when compiled under mips-gcc-6.3.0. This is mostly an exercise to set variables to NULL/0 when declared, but one was ensuring a string variable was set before printing it. We should never see "<unknown>" in a printed rule; if we do then this code definitely has some bugs that need addressing.
2020-07-14 05:07:16 +00:00
proto = NULL;
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
while (sz > 0 && next_idx != 0xFF) {
Reapply r345274 with build fixes for 32-bit architectures. Update NAT64LSN implementation: o most of data structures and relations were modified to be able support large number of translation states. Now each supported protocol can use full ports range. Ports groups now are belongs to IPv4 alias addresses, not hosts. Each ports group can keep several states chunks. This is controlled with new `states_chunks` config option. States chunks allow to have several translation states for single alias address and port, but for different destination addresses. o by default all hash tables now use jenkins hash. o ConcurrencyKit and epoch(9) is used to make NAT64LSN lockless on fast path. o one NAT64LSN instance now can be used to handle several IPv6 prefixes, special prefix "::" value should be used for this purpose when instance is created. o due to modified internal data structures relations, the socket opcode that does states listing was changed. Obtained from: Yandex LLC MFC after: 1 month Sponsored by: Yandex LLC
2019-03-19 10:57:03 +00:00
next_idx = stg->next.index;
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
sz -= sizeof(*stg);
if (stg->count == 0) {
stg++;
continue;
}
Reapply r345274 with build fixes for 32-bit architectures. Update NAT64LSN implementation: o most of data structures and relations were modified to be able support large number of translation states. Now each supported protocol can use full ports range. Ports groups now are belongs to IPv4 alias addresses, not hosts. Each ports group can keep several states chunks. This is controlled with new `states_chunks` config option. States chunks allow to have several translation states for single alias address and port, but for different destination addresses. o by default all hash tables now use jenkins hash. o ConcurrencyKit and epoch(9) is used to make NAT64LSN lockless on fast path. o one NAT64LSN instance now can be used to handle several IPv6 prefixes, special prefix "::" value should be used for this purpose when instance is created. o due to modified internal data structures relations, the socket opcode that does states listing was changed. Obtained from: Yandex LLC MFC after: 1 month Sponsored by: Yandex LLC
2019-03-19 10:57:03 +00:00
/*
* NOTE: addresses are in network byte order,
* ports are in host byte order.
*/
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
inet_ntop(AF_INET, &stg->alias4, a, sizeof(a));
Reapply r345274 with build fixes for 32-bit architectures. Update NAT64LSN implementation: o most of data structures and relations were modified to be able support large number of translation states. Now each supported protocol can use full ports range. Ports groups now are belongs to IPv4 alias addresses, not hosts. Each ports group can keep several states chunks. This is controlled with new `states_chunks` config option. States chunks allow to have several translation states for single alias address and port, but for different destination addresses. o by default all hash tables now use jenkins hash. o ConcurrencyKit and epoch(9) is used to make NAT64LSN lockless on fast path. o one NAT64LSN instance now can be used to handle several IPv6 prefixes, special prefix "::" value should be used for this purpose when instance is created. o due to modified internal data structures relations, the socket opcode that does states listing was changed. Obtained from: Yandex LLC MFC after: 1 month Sponsored by: Yandex LLC
2019-03-19 10:57:03 +00:00
ste = (ipfw_nat64lsn_state_v1 *)(stg + 1);
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
for (i = 0; i < stg->count && sz > 0; i++) {
sf = sflags;
Reapply r345274 with build fixes for 32-bit architectures. Update NAT64LSN implementation: o most of data structures and relations were modified to be able support large number of translation states. Now each supported protocol can use full ports range. Ports groups now are belongs to IPv4 alias addresses, not hosts. Each ports group can keep several states chunks. This is controlled with new `states_chunks` config option. States chunks allow to have several translation states for single alias address and port, but for different destination addresses. o by default all hash tables now use jenkins hash. o ConcurrencyKit and epoch(9) is used to make NAT64LSN lockless on fast path. o one NAT64LSN instance now can be used to handle several IPv6 prefixes, special prefix "::" value should be used for this purpose when instance is created. o due to modified internal data structures relations, the socket opcode that does states listing was changed. Obtained from: Yandex LLC MFC after: 1 month Sponsored by: Yandex LLC
2019-03-19 10:57:03 +00:00
inet_ntop(AF_INET6, &ste->host6, s, sizeof(s));
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
inet_ntop(AF_INET, &ste->daddr, f, sizeof(f));
Reapply r345274 with build fixes for 32-bit architectures. Update NAT64LSN implementation: o most of data structures and relations were modified to be able support large number of translation states. Now each supported protocol can use full ports range. Ports groups now are belongs to IPv4 alias addresses, not hosts. Each ports group can keep several states chunks. This is controlled with new `states_chunks` config option. States chunks allow to have several translation states for single alias address and port, but for different destination addresses. o by default all hash tables now use jenkins hash. o ConcurrencyKit and epoch(9) is used to make NAT64LSN lockless on fast path. o one NAT64LSN instance now can be used to handle several IPv6 prefixes, special prefix "::" value should be used for this purpose when instance is created. o due to modified internal data structures relations, the socket opcode that does states listing was changed. Obtained from: Yandex LLC MFC after: 1 month Sponsored by: Yandex LLC
2019-03-19 10:57:03 +00:00
switch (ste->proto) {
case IPPROTO_TCP:
proto = "TCP";
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
if (ste->flags & 0x02)
*sf++ = 'S';
if (ste->flags & 0x04)
*sf++ = 'E';
if (ste->flags & 0x01)
*sf++ = 'F';
Reapply r345274 with build fixes for 32-bit architectures. Update NAT64LSN implementation: o most of data structures and relations were modified to be able support large number of translation states. Now each supported protocol can use full ports range. Ports groups now are belongs to IPv4 alias addresses, not hosts. Each ports group can keep several states chunks. This is controlled with new `states_chunks` config option. States chunks allow to have several translation states for single alias address and port, but for different destination addresses. o by default all hash tables now use jenkins hash. o ConcurrencyKit and epoch(9) is used to make NAT64LSN lockless on fast path. o one NAT64LSN instance now can be used to handle several IPv6 prefixes, special prefix "::" value should be used for this purpose when instance is created. o due to modified internal data structures relations, the socket opcode that does states listing was changed. Obtained from: Yandex LLC MFC after: 1 month Sponsored by: Yandex LLC
2019-03-19 10:57:03 +00:00
break;
case IPPROTO_UDP:
proto = "UDP";
break;
case IPPROTO_ICMP:
proto = "ICMPv6";
break;
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
}
*sf = '\0';
Reapply r345274 with build fixes for 32-bit architectures. Update NAT64LSN implementation: o most of data structures and relations were modified to be able support large number of translation states. Now each supported protocol can use full ports range. Ports groups now are belongs to IPv4 alias addresses, not hosts. Each ports group can keep several states chunks. This is controlled with new `states_chunks` config option. States chunks allow to have several translation states for single alias address and port, but for different destination addresses. o by default all hash tables now use jenkins hash. o ConcurrencyKit and epoch(9) is used to make NAT64LSN lockless on fast path. o one NAT64LSN instance now can be used to handle several IPv6 prefixes, special prefix "::" value should be used for this purpose when instance is created. o due to modified internal data structures relations, the socket opcode that does states listing was changed. Obtained from: Yandex LLC MFC after: 1 month Sponsored by: Yandex LLC
2019-03-19 10:57:03 +00:00
switch (ste->proto) {
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
case IPPROTO_TCP:
case IPPROTO_UDP:
printf("%s:%d\t%s:%d\t%s\t%s\t%d\t%s:%d\n",
s, ste->sport, a, ste->aport, proto,
sflags, ste->idle, f, ste->dport);
break;
Reapply r345274 with build fixes for 32-bit architectures. Update NAT64LSN implementation: o most of data structures and relations were modified to be able support large number of translation states. Now each supported protocol can use full ports range. Ports groups now are belongs to IPv4 alias addresses, not hosts. Each ports group can keep several states chunks. This is controlled with new `states_chunks` config option. States chunks allow to have several translation states for single alias address and port, but for different destination addresses. o by default all hash tables now use jenkins hash. o ConcurrencyKit and epoch(9) is used to make NAT64LSN lockless on fast path. o one NAT64LSN instance now can be used to handle several IPv6 prefixes, special prefix "::" value should be used for this purpose when instance is created. o due to modified internal data structures relations, the socket opcode that does states listing was changed. Obtained from: Yandex LLC MFC after: 1 month Sponsored by: Yandex LLC
2019-03-19 10:57:03 +00:00
case IPPROTO_ICMP:
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
printf("%s\t%s\t%s\t\t%d\t%s\n",
s, a, proto, ste->idle, f);
break;
default:
printf("%s\t%s\t%d\t\t%d\t%s\n",
Reapply r345274 with build fixes for 32-bit architectures. Update NAT64LSN implementation: o most of data structures and relations were modified to be able support large number of translation states. Now each supported protocol can use full ports range. Ports groups now are belongs to IPv4 alias addresses, not hosts. Each ports group can keep several states chunks. This is controlled with new `states_chunks` config option. States chunks allow to have several translation states for single alias address and port, but for different destination addresses. o by default all hash tables now use jenkins hash. o ConcurrencyKit and epoch(9) is used to make NAT64LSN lockless on fast path. o one NAT64LSN instance now can be used to handle several IPv6 prefixes, special prefix "::" value should be used for this purpose when instance is created. o due to modified internal data structures relations, the socket opcode that does states listing was changed. Obtained from: Yandex LLC MFC after: 1 month Sponsored by: Yandex LLC
2019-03-19 10:57:03 +00:00
s, a, ste->proto, ste->idle, f);
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
}
ste++;
sz -= sizeof(*ste);
}
Reapply r345274 with build fixes for 32-bit architectures. Update NAT64LSN implementation: o most of data structures and relations were modified to be able support large number of translation states. Now each supported protocol can use full ports range. Ports groups now are belongs to IPv4 alias addresses, not hosts. Each ports group can keep several states chunks. This is controlled with new `states_chunks` config option. States chunks allow to have several translation states for single alias address and port, but for different destination addresses. o by default all hash tables now use jenkins hash. o ConcurrencyKit and epoch(9) is used to make NAT64LSN lockless on fast path. o one NAT64LSN instance now can be used to handle several IPv6 prefixes, special prefix "::" value should be used for this purpose when instance is created. o due to modified internal data structures relations, the socket opcode that does states listing was changed. Obtained from: Yandex LLC MFC after: 1 month Sponsored by: Yandex LLC
2019-03-19 10:57:03 +00:00
stg = (ipfw_nat64lsn_stg_v1 *)ste;
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
}
return (next_idx);
}
static int
nat64lsn_states_cb(ipfw_nat64lsn_cfg *cfg, const char *name, uint8_t set)
{
ipfw_obj_header *oh;
ipfw_obj_data *od;
void *buf;
uint64_t next_idx;
size_t sz;
if (name != NULL && strcmp(cfg->name, name) != 0)
return (ESRCH);
if (set != 0 && cfg->set != set)
return (ESRCH);
next_idx = 0;
sz = 4096;
if ((buf = calloc(1, sz)) == NULL)
err(EX_OSERR, NULL);
do {
oh = (ipfw_obj_header *)buf;
Reapply r345274 with build fixes for 32-bit architectures. Update NAT64LSN implementation: o most of data structures and relations were modified to be able support large number of translation states. Now each supported protocol can use full ports range. Ports groups now are belongs to IPv4 alias addresses, not hosts. Each ports group can keep several states chunks. This is controlled with new `states_chunks` config option. States chunks allow to have several translation states for single alias address and port, but for different destination addresses. o by default all hash tables now use jenkins hash. o ConcurrencyKit and epoch(9) is used to make NAT64LSN lockless on fast path. o one NAT64LSN instance now can be used to handle several IPv6 prefixes, special prefix "::" value should be used for this purpose when instance is created. o due to modified internal data structures relations, the socket opcode that does states listing was changed. Obtained from: Yandex LLC MFC after: 1 month Sponsored by: Yandex LLC
2019-03-19 10:57:03 +00:00
oh->opheader.version = 1; /* Force using ov new API */
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
od = (ipfw_obj_data *)(oh + 1);
nat64lsn_fill_ntlv(&oh->ntlv, cfg->name, set);
od->head.type = IPFW_TLV_OBJDATA;
od->head.length = sizeof(*od) + sizeof(next_idx);
*((uint64_t *)(od + 1)) = next_idx;
if (do_get3(IP_FW_NAT64LSN_LIST_STATES, &oh->opheader, &sz))
err(EX_OSERR, "Error reading nat64lsn states");
next_idx = nat64lsn_print_states(buf);
sz = 4096;
memset(buf, 0, sz);
} while (next_idx != 0xFF);
free(buf);
return (0);
}
static struct _s_x nat64statscmds[] = {
{ "reset", TOK_RESET },
{ NULL, 0 }
};
static void
ipfw_nat64lsn_stats_handler(const char *name, uint8_t set, int ac, char *av[])
{
int tcmd;
if (ac == 0) {
nat64lsn_stats(name, set);
return;
}
NEED1("nat64lsn stats needs command");
tcmd = get_token(nat64statscmds, *av, "nat64lsn stats command");
switch (tcmd) {
case TOK_RESET:
nat64lsn_reset_stats(name, set);
}
}
static struct _s_x nat64listcmds[] = {
{ "states", TOK_STATES },
{ "config", TOK_CONFIG },
{ NULL, 0 }
};
static void
ipfw_nat64lsn_list_handler(const char *name, uint8_t set, int ac, char *av[])
{
int tcmd;
if (ac == 0) {
nat64lsn_foreach(nat64lsn_show_cb, name, set, 1);
return;
}
NEED1("nat64lsn list needs command");
tcmd = get_token(nat64listcmds, *av, "nat64lsn list command");
switch (tcmd) {
case TOK_STATES:
nat64lsn_foreach(nat64lsn_states_cb, name, set, 1);
break;
case TOK_CONFIG:
nat64lsn_foreach(nat64lsn_show_cb, name, set, 1);
}
}
/*
* This one handles all nat64lsn-related commands
* ipfw [set N] nat64lsn NAME {create | config} ...
* ipfw [set N] nat64lsn NAME stats
* ipfw [set N] nat64lsn {NAME | all} destroy
* ipfw [set N] nat64lsn {NAME | all} {list | show} [config | states]
*/
#define nat64lsn_check_name table_check_name
void
ipfw_nat64lsn_handler(int ac, char *av[])
{
const char *name;
int tcmd;
uint8_t set;
ipfw(8): Fix most warnings with the default WARNS level. - Add missing const and static qualifiers. - Avoid shadowing the global "co" by renaming it to "g_co". - Avoid mixing signedness in loop bound checks. - Leave -Wcast-align warnings disabled for now. Reviewed by: ae, melifaro MFC after: 2 weeks Differential Revision: https://reviews.freebsd.org/D25456
2020-07-13 17:51:04 +00:00
if (g_co.use_set != 0)
set = g_co.use_set - 1;
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
else
set = 0;
ac--; av++;
NEED1("nat64lsn needs instance name");
name = *av;
if (nat64lsn_check_name(name) != 0) {
if (strcmp(name, "all") == 0)
name = NULL;
else
errx(EX_USAGE, "nat64lsn instance name %s is invalid",
name);
}
ac--; av++;
NEED1("nat64lsn needs command");
tcmd = get_token(nat64cmds, *av, "nat64lsn command");
if (name == NULL && tcmd != TOK_DESTROY && tcmd != TOK_LIST)
errx(EX_USAGE, "nat64lsn instance name required");
switch (tcmd) {
case TOK_CREATE:
ac--; av++;
nat64lsn_create(name, set, ac, av);
break;
case TOK_CONFIG:
ac--; av++;
nat64lsn_config(name, set, ac, av);
break;
case TOK_LIST:
ac--; av++;
ipfw_nat64lsn_list_handler(name, set, ac, av);
break;
case TOK_DESTROY:
if (name == NULL)
nat64lsn_foreach(nat64lsn_destroy_cb, NULL, set, 0);
else
nat64lsn_destroy(name, set);
break;
case TOK_STATS:
ac--; av++;
ipfw_nat64lsn_stats_handler(name, set, ac, av);
}
}
static void
nat64lsn_fill_ntlv(ipfw_obj_ntlv *ntlv, const char *name, uint8_t set)
{
ntlv->head.type = IPFW_TLV_EACTION_NAME(1); /* it doesn't matter */
ntlv->head.length = sizeof(ipfw_obj_ntlv);
ntlv->idx = 1;
ntlv->set = set;
strlcpy(ntlv->name, name, sizeof(ntlv->name));
}
static void
nat64lsn_apply_mask(int af, void *prefix, uint16_t plen)
{
struct in6_addr mask6, *p6;
struct in_addr mask4, *p4;
if (af == AF_INET) {
p4 = (struct in_addr *)prefix;
mask4.s_addr = htonl(~((1 << (32 - plen)) - 1));
p4->s_addr &= mask4.s_addr;
} else if (af == AF_INET6) {
p6 = (struct in6_addr *)prefix;
n2mask(&mask6, plen);
APPLY_MASK(p6, &mask6);
}
}
static void
nat64lsn_parse_prefix(const char *arg, int af, void *prefix, uint16_t *plen)
{
char *p, *l;
p = strdup(arg);
if (p == NULL)
err(EX_OSERR, NULL);
if ((l = strchr(p, '/')) != NULL)
*l++ = '\0';
if (l == NULL)
errx(EX_USAGE, "Prefix length required");
if (inet_pton(af, p, prefix) != 1)
errx(EX_USAGE, "Bad prefix: %s", p);
*plen = (uint16_t)strtol(l, &l, 10);
if (*l != '\0' || *plen == 0 || (af == AF_INET && *plen > 32) ||
(af == AF_INET6 && *plen > 96))
errx(EX_USAGE, "Bad prefix length: %s", arg);
nat64lsn_apply_mask(af, prefix, *plen);
free(p);
}
static uint32_t
nat64lsn_parse_int(const char *arg, const char *desc)
{
char *p;
uint32_t val;
val = (uint32_t)strtol(arg, &p, 10);
if (*p != '\0')
errx(EX_USAGE, "Invalid %s value: %s\n", desc, arg);
return (val);
}
static struct _s_x nat64newcmds[] = {
{ "prefix6", TOK_PREFIX6 },
{ "jmaxlen", TOK_JMAXLEN },
{ "prefix4", TOK_PREFIX4 },
{ "host_del_age", TOK_HOST_DEL_AGE },
{ "pg_del_age", TOK_PG_DEL_AGE },
{ "tcp_syn_age", TOK_TCP_SYN_AGE },
{ "tcp_close_age",TOK_TCP_CLOSE_AGE },
{ "tcp_est_age", TOK_TCP_EST_AGE },
{ "udp_age", TOK_UDP_AGE },
{ "icmp_age", TOK_ICMP_AGE },
Reapply r345274 with build fixes for 32-bit architectures. Update NAT64LSN implementation: o most of data structures and relations were modified to be able support large number of translation states. Now each supported protocol can use full ports range. Ports groups now are belongs to IPv4 alias addresses, not hosts. Each ports group can keep several states chunks. This is controlled with new `states_chunks` config option. States chunks allow to have several translation states for single alias address and port, but for different destination addresses. o by default all hash tables now use jenkins hash. o ConcurrencyKit and epoch(9) is used to make NAT64LSN lockless on fast path. o one NAT64LSN instance now can be used to handle several IPv6 prefixes, special prefix "::" value should be used for this purpose when instance is created. o due to modified internal data structures relations, the socket opcode that does states listing was changed. Obtained from: Yandex LLC MFC after: 1 month Sponsored by: Yandex LLC
2019-03-19 10:57:03 +00:00
{ "states_chunks",TOK_STATES_CHUNKS },
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
{ "log", TOK_LOG },
{ "-log", TOK_LOGOFF },
Modify struct nat64_config. Add second IPv6 prefix to generic config structure and rename another fields to conform to RFC6877. Now it contains two prefixes and length: PLAT is provider-side translator that translates N:1 global IPv6 addresses to global IPv4 addresses. CLAT is customer-side translator (XLAT) that algorithmically translates 1:1 IPv4 addresses to global IPv6 addresses. Use PLAT prefix in stateless (nat64stl) and stateful (nat64lsn) translators. Modify nat64_extract_ip4() and nat64_embed_ip4() functions to accept prefix length and use plat_plen to specify prefix length. Retire net.inet.ip.fw.nat64_allow_private sysctl variable. Add NAT64_ALLOW_PRIVATE flag and use "allow_private" config option to configure this ability separately for each NAT64 instance. Obtained from: Yandex LLC MFC after: 1 month Sponsored by: Yandex LLC
2019-03-18 10:39:14 +00:00
{ "allow_private", TOK_PRIVATE },
{ "-allow_private", TOK_PRIVATEOFF },
Reapply r345274 with build fixes for 32-bit architectures. Update NAT64LSN implementation: o most of data structures and relations were modified to be able support large number of translation states. Now each supported protocol can use full ports range. Ports groups now are belongs to IPv4 alias addresses, not hosts. Each ports group can keep several states chunks. This is controlled with new `states_chunks` config option. States chunks allow to have several translation states for single alias address and port, but for different destination addresses. o by default all hash tables now use jenkins hash. o ConcurrencyKit and epoch(9) is used to make NAT64LSN lockless on fast path. o one NAT64LSN instance now can be used to handle several IPv6 prefixes, special prefix "::" value should be used for this purpose when instance is created. o due to modified internal data structures relations, the socket opcode that does states listing was changed. Obtained from: Yandex LLC MFC after: 1 month Sponsored by: Yandex LLC
2019-03-19 10:57:03 +00:00
/* for compatibility with old configurations */
{ "max_ports", TOK_MAX_PORTS }, /* unused */
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
{ NULL, 0 }
};
/*
* Creates new nat64lsn instance
* ipfw nat64lsn <NAME> create
* [ max_ports <N> ]
* Request: [ ipfw_obj_lheader ipfw_nat64lsn_cfg ]
*/
#define NAT64LSN_HAS_PREFIX4 0x01
#define NAT64LSN_HAS_PREFIX6 0x02
static void
nat64lsn_create(const char *name, uint8_t set, int ac, char **av)
{
char buf[sizeof(ipfw_obj_lheader) + sizeof(ipfw_nat64lsn_cfg)];
ipfw_nat64lsn_cfg *cfg;
ipfw_obj_lheader *olh;
int tcmd, flags;
char *opt;
memset(&buf, 0, sizeof(buf));
olh = (ipfw_obj_lheader *)buf;
cfg = (ipfw_nat64lsn_cfg *)(olh + 1);
/* Some reasonable defaults */
inet_pton(AF_INET6, "64:ff9b::", &cfg->prefix6);
cfg->plen6 = 96;
cfg->set = set;
cfg->max_ports = NAT64LSN_MAX_PORTS;
cfg->jmaxlen = NAT64LSN_JMAXLEN;
cfg->nh_delete_delay = NAT64LSN_HOST_AGE;
cfg->pg_delete_delay = NAT64LSN_PG_AGE;
cfg->st_syn_ttl = NAT64LSN_TCP_SYN_AGE;
cfg->st_estab_ttl = NAT64LSN_TCP_EST_AGE;
cfg->st_close_ttl = NAT64LSN_TCP_FIN_AGE;
cfg->st_udp_ttl = NAT64LSN_UDP_AGE;
cfg->st_icmp_ttl = NAT64LSN_ICMP_AGE;
flags = NAT64LSN_HAS_PREFIX6;
while (ac > 0) {
tcmd = get_token(nat64newcmds, *av, "option");
opt = *av;
ac--; av++;
switch (tcmd) {
case TOK_PREFIX4:
NEED1("IPv4 prefix required");
nat64lsn_parse_prefix(*av, AF_INET, &cfg->prefix4,
&cfg->plen4);
flags |= NAT64LSN_HAS_PREFIX4;
ac--; av++;
break;
case TOK_PREFIX6:
NEED1("IPv6 prefix required");
nat64lsn_parse_prefix(*av, AF_INET6, &cfg->prefix6,
&cfg->plen6);
Bring in some last changes in NAT64 implementation: o Modify ipfw(8) to be able set any prefix6 not just Well-Known, and also show configured prefix6; o relocate some definitions and macros into proper place; o convert nat64_debug and nat64_allow_private variables to be VNET-compatible; o add struct nat64_config that keeps generic configuration needed to NAT64 code; o add nat64_check_prefix6() function to check validness of specified by user IPv6 prefix according to RFC6052; o use nat64_check_private_ip4() and nat64_embed_ip4() functions instead of nat64_get_ip4() and nat64_set_ip4() macros. This allows to use any configured IPv6 prefixes that are allowed by RFC6052; o introduce NAT64_WKPFX flag, that is set when IPv6 prefix is Well-Known IPv6 prefix. It is used to reduce overhead to check this; o modify nat64lsn_cfg and nat64stl_cfg structures to use nat64_config structure. And respectivelly modify the rest of code; o remove now unused ro argument from nat64_output() function; o remove __FreeBSD_version ifdef, NAT64 was not merged to older versions; o add commented -DIPFIREWALL_NAT64_DIRECT_OUTPUT flag to module's Makefile as example. Obtained from: Yandex LLC MFC after: 1 month Sponsored by: Yandex LLC
2018-05-09 11:59:24 +00:00
if (ipfw_check_nat64prefix(&cfg->prefix6,
Reapply r345274 with build fixes for 32-bit architectures. Update NAT64LSN implementation: o most of data structures and relations were modified to be able support large number of translation states. Now each supported protocol can use full ports range. Ports groups now are belongs to IPv4 alias addresses, not hosts. Each ports group can keep several states chunks. This is controlled with new `states_chunks` config option. States chunks allow to have several translation states for single alias address and port, but for different destination addresses. o by default all hash tables now use jenkins hash. o ConcurrencyKit and epoch(9) is used to make NAT64LSN lockless on fast path. o one NAT64LSN instance now can be used to handle several IPv6 prefixes, special prefix "::" value should be used for this purpose when instance is created. o due to modified internal data structures relations, the socket opcode that does states listing was changed. Obtained from: Yandex LLC MFC after: 1 month Sponsored by: Yandex LLC
2019-03-19 10:57:03 +00:00
cfg->plen6) != 0 &&
!IN6_IS_ADDR_UNSPECIFIED(&cfg->prefix6))
Bring in some last changes in NAT64 implementation: o Modify ipfw(8) to be able set any prefix6 not just Well-Known, and also show configured prefix6; o relocate some definitions and macros into proper place; o convert nat64_debug and nat64_allow_private variables to be VNET-compatible; o add struct nat64_config that keeps generic configuration needed to NAT64 code; o add nat64_check_prefix6() function to check validness of specified by user IPv6 prefix according to RFC6052; o use nat64_check_private_ip4() and nat64_embed_ip4() functions instead of nat64_get_ip4() and nat64_set_ip4() macros. This allows to use any configured IPv6 prefixes that are allowed by RFC6052; o introduce NAT64_WKPFX flag, that is set when IPv6 prefix is Well-Known IPv6 prefix. It is used to reduce overhead to check this; o modify nat64lsn_cfg and nat64stl_cfg structures to use nat64_config structure. And respectivelly modify the rest of code; o remove now unused ro argument from nat64_output() function; o remove __FreeBSD_version ifdef, NAT64 was not merged to older versions; o add commented -DIPFIREWALL_NAT64_DIRECT_OUTPUT flag to module's Makefile as example. Obtained from: Yandex LLC MFC after: 1 month Sponsored by: Yandex LLC
2018-05-09 11:59:24 +00:00
errx(EX_USAGE, "Bad prefix6 %s", *av);
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
ac--; av++;
break;
case TOK_JMAXLEN:
NEED1("job queue length required");
cfg->jmaxlen = nat64lsn_parse_int(*av, opt);
ac--; av++;
break;
case TOK_MAX_PORTS:
NEED1("Max per-user ports required");
cfg->max_ports = nat64lsn_parse_int(*av, opt);
ac--; av++;
break;
case TOK_HOST_DEL_AGE:
NEED1("host delete delay required");
cfg->nh_delete_delay = (uint16_t)nat64lsn_parse_int(
*av, opt);
ac--; av++;
break;
case TOK_PG_DEL_AGE:
NEED1("portgroup delete delay required");
cfg->pg_delete_delay = (uint16_t)nat64lsn_parse_int(
*av, opt);
ac--; av++;
break;
case TOK_TCP_SYN_AGE:
NEED1("tcp syn age required");
cfg->st_syn_ttl = (uint16_t)nat64lsn_parse_int(
*av, opt);
ac--; av++;
break;
case TOK_TCP_CLOSE_AGE:
NEED1("tcp close age required");
cfg->st_close_ttl = (uint16_t)nat64lsn_parse_int(
*av, opt);
ac--; av++;
break;
case TOK_TCP_EST_AGE:
NEED1("tcp est age required");
cfg->st_estab_ttl = (uint16_t)nat64lsn_parse_int(
*av, opt);
ac--; av++;
break;
case TOK_UDP_AGE:
NEED1("udp age required");
cfg->st_udp_ttl = (uint16_t)nat64lsn_parse_int(
*av, opt);
ac--; av++;
break;
case TOK_ICMP_AGE:
NEED1("icmp age required");
cfg->st_icmp_ttl = (uint16_t)nat64lsn_parse_int(
*av, opt);
ac--; av++;
break;
Reapply r345274 with build fixes for 32-bit architectures. Update NAT64LSN implementation: o most of data structures and relations were modified to be able support large number of translation states. Now each supported protocol can use full ports range. Ports groups now are belongs to IPv4 alias addresses, not hosts. Each ports group can keep several states chunks. This is controlled with new `states_chunks` config option. States chunks allow to have several translation states for single alias address and port, but for different destination addresses. o by default all hash tables now use jenkins hash. o ConcurrencyKit and epoch(9) is used to make NAT64LSN lockless on fast path. o one NAT64LSN instance now can be used to handle several IPv6 prefixes, special prefix "::" value should be used for this purpose when instance is created. o due to modified internal data structures relations, the socket opcode that does states listing was changed. Obtained from: Yandex LLC MFC after: 1 month Sponsored by: Yandex LLC
2019-03-19 10:57:03 +00:00
case TOK_STATES_CHUNKS:
NEED1("number of chunks required");
cfg->states_chunks = (uint8_t)nat64lsn_parse_int(
*av, opt);
ac--; av++;
break;
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
case TOK_LOG:
cfg->flags |= NAT64_LOG;
break;
case TOK_LOGOFF:
cfg->flags &= ~NAT64_LOG;
break;
Modify struct nat64_config. Add second IPv6 prefix to generic config structure and rename another fields to conform to RFC6877. Now it contains two prefixes and length: PLAT is provider-side translator that translates N:1 global IPv6 addresses to global IPv4 addresses. CLAT is customer-side translator (XLAT) that algorithmically translates 1:1 IPv4 addresses to global IPv6 addresses. Use PLAT prefix in stateless (nat64stl) and stateful (nat64lsn) translators. Modify nat64_extract_ip4() and nat64_embed_ip4() functions to accept prefix length and use plat_plen to specify prefix length. Retire net.inet.ip.fw.nat64_allow_private sysctl variable. Add NAT64_ALLOW_PRIVATE flag and use "allow_private" config option to configure this ability separately for each NAT64 instance. Obtained from: Yandex LLC MFC after: 1 month Sponsored by: Yandex LLC
2019-03-18 10:39:14 +00:00
case TOK_PRIVATE:
cfg->flags |= NAT64_ALLOW_PRIVATE;
break;
case TOK_PRIVATEOFF:
cfg->flags &= ~NAT64_ALLOW_PRIVATE;
break;
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
}
}
/* Check validness */
if ((flags & NAT64LSN_HAS_PREFIX4) != NAT64LSN_HAS_PREFIX4)
errx(EX_USAGE, "prefix4 required");
olh->count = 1;
olh->objsize = sizeof(*cfg);
olh->size = sizeof(buf);
strlcpy(cfg->name, name, sizeof(cfg->name));
if (do_set3(IP_FW_NAT64LSN_CREATE, &olh->opheader, sizeof(buf)) != 0)
err(EX_OSERR, "nat64lsn instance creation failed");
}
/*
* Configures existing nat64lsn instance
* ipfw nat64lsn <NAME> config <options>
* Request: [ ipfw_obj_header ipfw_nat64lsn_cfg ]
*/
static void
nat64lsn_config(const char *name, uint8_t set, int ac, char **av)
{
char buf[sizeof(ipfw_obj_header) + sizeof(ipfw_nat64lsn_cfg)];
ipfw_nat64lsn_cfg *cfg;
ipfw_obj_header *oh;
size_t sz;
char *opt;
int tcmd;
if (ac == 0)
errx(EX_USAGE, "config options required");
memset(&buf, 0, sizeof(buf));
oh = (ipfw_obj_header *)buf;
cfg = (ipfw_nat64lsn_cfg *)(oh + 1);
sz = sizeof(buf);
nat64lsn_fill_ntlv(&oh->ntlv, name, set);
if (do_get3(IP_FW_NAT64LSN_CONFIG, &oh->opheader, &sz) != 0)
err(EX_OSERR, "failed to get config for instance %s", name);
while (ac > 0) {
tcmd = get_token(nat64newcmds, *av, "option");
opt = *av;
ac--; av++;
switch (tcmd) {
case TOK_MAX_PORTS:
NEED1("Max per-user ports required");
cfg->max_ports = nat64lsn_parse_int(*av, opt);
ac--; av++;
break;
case TOK_JMAXLEN:
NEED1("job queue length required");
cfg->jmaxlen = nat64lsn_parse_int(*av, opt);
ac--; av++;
break;
case TOK_HOST_DEL_AGE:
NEED1("host delete delay required");
cfg->nh_delete_delay = (uint16_t)nat64lsn_parse_int(
*av, opt);
ac--; av++;
break;
case TOK_PG_DEL_AGE:
NEED1("portgroup delete delay required");
cfg->pg_delete_delay = (uint16_t)nat64lsn_parse_int(
*av, opt);
ac--; av++;
break;
case TOK_TCP_SYN_AGE:
NEED1("tcp syn age required");
cfg->st_syn_ttl = (uint16_t)nat64lsn_parse_int(
*av, opt);
ac--; av++;
break;
case TOK_TCP_CLOSE_AGE:
NEED1("tcp close age required");
cfg->st_close_ttl = (uint16_t)nat64lsn_parse_int(
*av, opt);
ac--; av++;
break;
case TOK_TCP_EST_AGE:
NEED1("tcp est age required");
cfg->st_estab_ttl = (uint16_t)nat64lsn_parse_int(
*av, opt);
ac--; av++;
break;
case TOK_UDP_AGE:
NEED1("udp age required");
cfg->st_udp_ttl = (uint16_t)nat64lsn_parse_int(
*av, opt);
ac--; av++;
break;
case TOK_ICMP_AGE:
NEED1("icmp age required");
cfg->st_icmp_ttl = (uint16_t)nat64lsn_parse_int(
*av, opt);
ac--; av++;
break;
Reapply r345274 with build fixes for 32-bit architectures. Update NAT64LSN implementation: o most of data structures and relations were modified to be able support large number of translation states. Now each supported protocol can use full ports range. Ports groups now are belongs to IPv4 alias addresses, not hosts. Each ports group can keep several states chunks. This is controlled with new `states_chunks` config option. States chunks allow to have several translation states for single alias address and port, but for different destination addresses. o by default all hash tables now use jenkins hash. o ConcurrencyKit and epoch(9) is used to make NAT64LSN lockless on fast path. o one NAT64LSN instance now can be used to handle several IPv6 prefixes, special prefix "::" value should be used for this purpose when instance is created. o due to modified internal data structures relations, the socket opcode that does states listing was changed. Obtained from: Yandex LLC MFC after: 1 month Sponsored by: Yandex LLC
2019-03-19 10:57:03 +00:00
case TOK_STATES_CHUNKS:
NEED1("number of chunks required");
cfg->states_chunks = (uint8_t)nat64lsn_parse_int(
*av, opt);
ac--; av++;
break;
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
case TOK_LOG:
cfg->flags |= NAT64_LOG;
break;
case TOK_LOGOFF:
cfg->flags &= ~NAT64_LOG;
break;
Modify struct nat64_config. Add second IPv6 prefix to generic config structure and rename another fields to conform to RFC6877. Now it contains two prefixes and length: PLAT is provider-side translator that translates N:1 global IPv6 addresses to global IPv4 addresses. CLAT is customer-side translator (XLAT) that algorithmically translates 1:1 IPv4 addresses to global IPv6 addresses. Use PLAT prefix in stateless (nat64stl) and stateful (nat64lsn) translators. Modify nat64_extract_ip4() and nat64_embed_ip4() functions to accept prefix length and use plat_plen to specify prefix length. Retire net.inet.ip.fw.nat64_allow_private sysctl variable. Add NAT64_ALLOW_PRIVATE flag and use "allow_private" config option to configure this ability separately for each NAT64 instance. Obtained from: Yandex LLC MFC after: 1 month Sponsored by: Yandex LLC
2019-03-18 10:39:14 +00:00
case TOK_PRIVATE:
cfg->flags |= NAT64_ALLOW_PRIVATE;
break;
case TOK_PRIVATEOFF:
cfg->flags &= ~NAT64_ALLOW_PRIVATE;
break;
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
default:
errx(EX_USAGE, "Can't change %s option", opt);
}
}
if (do_set3(IP_FW_NAT64LSN_CONFIG, &oh->opheader, sizeof(buf)) != 0)
err(EX_OSERR, "nat64lsn instance configuration failed");
}
/*
* Reset nat64lsn instance statistics specified by @oh->ntlv.
* Request: [ ipfw_obj_header ]
*/
static void
nat64lsn_reset_stats(const char *name, uint8_t set)
{
ipfw_obj_header oh;
memset(&oh, 0, sizeof(oh));
nat64lsn_fill_ntlv(&oh.ntlv, name, set);
if (do_set3(IP_FW_NAT64LSN_RESET_STATS, &oh.opheader, sizeof(oh)) != 0)
err(EX_OSERR, "failed to reset stats for instance %s", name);
}
/*
* Destroys nat64lsn instance specified by @oh->ntlv.
* Request: [ ipfw_obj_header ]
*/
static void
nat64lsn_destroy(const char *name, uint8_t set)
{
ipfw_obj_header oh;
memset(&oh, 0, sizeof(oh));
nat64lsn_fill_ntlv(&oh.ntlv, name, set);
if (do_set3(IP_FW_NAT64LSN_DESTROY, &oh.opheader, sizeof(oh)) != 0)
err(EX_OSERR, "failed to destroy nat instance %s", name);
}
/*
* Get nat64lsn instance statistics.
* Request: [ ipfw_obj_header ]
* Reply: [ ipfw_obj_header ipfw_obj_ctlv [ uint64_t x N ] ]
*/
static int
nat64lsn_get_stats(const char *name, uint8_t set,
struct ipfw_nat64lsn_stats *stats)
{
ipfw_obj_header *oh;
ipfw_obj_ctlv *oc;
size_t sz;
sz = sizeof(*oh) + sizeof(*oc) + sizeof(*stats);
oh = calloc(1, sz);
nat64lsn_fill_ntlv(&oh->ntlv, name, set);
if (do_get3(IP_FW_NAT64LSN_STATS, &oh->opheader, &sz) == 0) {
oc = (ipfw_obj_ctlv *)(oh + 1);
memcpy(stats, oc + 1, sizeof(*stats));
free(oh);
return (0);
}
free(oh);
return (-1);
}
static void
nat64lsn_stats(const char *name, uint8_t set)
{
struct ipfw_nat64lsn_stats stats;
if (nat64lsn_get_stats(name, set, &stats) != 0)
err(EX_OSERR, "Error retrieving stats");
ipfw(8): Fix most warnings with the default WARNS level. - Add missing const and static qualifiers. - Avoid shadowing the global "co" by renaming it to "g_co". - Avoid mixing signedness in loop bound checks. - Leave -Wcast-align warnings disabled for now. Reviewed by: ae, melifaro MFC after: 2 weeks Differential Revision: https://reviews.freebsd.org/D25456
2020-07-13 17:51:04 +00:00
if (g_co.use_set != 0 || set != 0)
Make statistics nat64lsn, nat64stl an nptv6 output netstat-like: "@value @description" and fix build due to -Wformat errors.
2016-08-14 13:17:55 +00:00
printf("set %u ", set);
printf("nat64lsn %s\n", name);
printf("\t%ju packets translated from IPv6 to IPv4\n",
(uintmax_t)stats.opcnt64);
printf("\t%ju packets translated from IPv4 to IPv6\n",
(uintmax_t)stats.opcnt46);
printf("\t%ju IPv6 fragments created\n",
(uintmax_t)stats.ofrags);
printf("\t%ju IPv4 fragments received\n",
(uintmax_t)stats.ifrags);
printf("\t%ju output packets dropped due to no bufs, etc.\n",
(uintmax_t)stats.oerrors);
printf("\t%ju output packets discarded due to no IPv4 route\n",
(uintmax_t)stats.noroute4);
printf("\t%ju output packets discarded due to no IPv6 route\n",
(uintmax_t)stats.noroute6);
printf("\t%ju packets discarded due to unsupported protocol\n",
(uintmax_t)stats.noproto);
printf("\t%ju packets discarded due to memory allocation problems\n",
(uintmax_t)stats.nomem);
printf("\t%ju packets discarded due to some errors\n",
(uintmax_t)stats.dropped);
printf("\t%ju packets not matched with IPv4 prefix\n",
(uintmax_t)stats.nomatch4);
printf("\t%ju mbufs queued for post processing\n",
(uintmax_t)stats.jreinjected);
printf("\t%ju times the job queue was processed\n",
(uintmax_t)stats.jcalls);
printf("\t%ju job requests queued\n",
(uintmax_t)stats.jrequests);
printf("\t%ju job requests queue limit reached\n",
(uintmax_t)stats.jmaxlen);
printf("\t%ju job requests failed due to memory allocation problems\n",
(uintmax_t)stats.jnomem);
printf("\t%ju hosts allocated\n", (uintmax_t)stats.hostcount);
printf("\t%ju hosts requested\n", (uintmax_t)stats.jhostsreq);
printf("\t%ju host requests failed\n", (uintmax_t)stats.jhostfails);
printf("\t%ju portgroups requested\n", (uintmax_t)stats.jportreq);
printf("\t%ju portgroups allocated\n", (uintmax_t)stats.spgcreated);
printf("\t%ju portgroups deleted\n", (uintmax_t)stats.spgdeleted);
printf("\t%ju portgroup requests failed\n",
(uintmax_t)stats.jportfails);
printf("\t%ju portgroups allocated for TCP\n",
(uintmax_t)stats.tcpchunks);
printf("\t%ju portgroups allocated for UDP\n",
(uintmax_t)stats.udpchunks);
printf("\t%ju portgroups allocated for ICMP\n",
(uintmax_t)stats.icmpchunks);
printf("\t%ju states created\n", (uintmax_t)stats.screated);
printf("\t%ju states deleted\n", (uintmax_t)stats.sdeleted);
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
}
static int
nat64lsn_show_cb(ipfw_nat64lsn_cfg *cfg, const char *name, uint8_t set)
{
char abuf[INET6_ADDRSTRLEN];
if (name != NULL && strcmp(cfg->name, name) != 0)
return (ESRCH);
ipfw(8): Fix most warnings with the default WARNS level. - Add missing const and static qualifiers. - Avoid shadowing the global "co" by renaming it to "g_co". - Avoid mixing signedness in loop bound checks. - Leave -Wcast-align warnings disabled for now. Reviewed by: ae, melifaro MFC after: 2 weeks Differential Revision: https://reviews.freebsd.org/D25456
2020-07-13 17:51:04 +00:00
if (g_co.use_set != 0 && cfg->set != set)
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
return (ESRCH);
ipfw(8): Fix most warnings with the default WARNS level. - Add missing const and static qualifiers. - Avoid shadowing the global "co" by renaming it to "g_co". - Avoid mixing signedness in loop bound checks. - Leave -Wcast-align warnings disabled for now. Reviewed by: ae, melifaro MFC after: 2 weeks Differential Revision: https://reviews.freebsd.org/D25456
2020-07-13 17:51:04 +00:00
if (g_co.use_set != 0 || cfg->set != 0)
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
printf("set %u ", cfg->set);
inet_ntop(AF_INET, &cfg->prefix4, abuf, sizeof(abuf));
Bring in some last changes in NAT64 implementation: o Modify ipfw(8) to be able set any prefix6 not just Well-Known, and also show configured prefix6; o relocate some definitions and macros into proper place; o convert nat64_debug and nat64_allow_private variables to be VNET-compatible; o add struct nat64_config that keeps generic configuration needed to NAT64 code; o add nat64_check_prefix6() function to check validness of specified by user IPv6 prefix according to RFC6052; o use nat64_check_private_ip4() and nat64_embed_ip4() functions instead of nat64_get_ip4() and nat64_set_ip4() macros. This allows to use any configured IPv6 prefixes that are allowed by RFC6052; o introduce NAT64_WKPFX flag, that is set when IPv6 prefix is Well-Known IPv6 prefix. It is used to reduce overhead to check this; o modify nat64lsn_cfg and nat64stl_cfg structures to use nat64_config structure. And respectivelly modify the rest of code; o remove now unused ro argument from nat64_output() function; o remove __FreeBSD_version ifdef, NAT64 was not merged to older versions; o add commented -DIPFIREWALL_NAT64_DIRECT_OUTPUT flag to module's Makefile as example. Obtained from: Yandex LLC MFC after: 1 month Sponsored by: Yandex LLC
2018-05-09 11:59:24 +00:00
printf("nat64lsn %s prefix4 %s/%u", cfg->name, abuf, cfg->plen4);
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
inet_ntop(AF_INET6, &cfg->prefix6, abuf, sizeof(abuf));
Bring in some last changes in NAT64 implementation: o Modify ipfw(8) to be able set any prefix6 not just Well-Known, and also show configured prefix6; o relocate some definitions and macros into proper place; o convert nat64_debug and nat64_allow_private variables to be VNET-compatible; o add struct nat64_config that keeps generic configuration needed to NAT64 code; o add nat64_check_prefix6() function to check validness of specified by user IPv6 prefix according to RFC6052; o use nat64_check_private_ip4() and nat64_embed_ip4() functions instead of nat64_get_ip4() and nat64_set_ip4() macros. This allows to use any configured IPv6 prefixes that are allowed by RFC6052; o introduce NAT64_WKPFX flag, that is set when IPv6 prefix is Well-Known IPv6 prefix. It is used to reduce overhead to check this; o modify nat64lsn_cfg and nat64stl_cfg structures to use nat64_config structure. And respectivelly modify the rest of code; o remove now unused ro argument from nat64_output() function; o remove __FreeBSD_version ifdef, NAT64 was not merged to older versions; o add commented -DIPFIREWALL_NAT64_DIRECT_OUTPUT flag to module's Makefile as example. Obtained from: Yandex LLC MFC after: 1 month Sponsored by: Yandex LLC
2018-05-09 11:59:24 +00:00
printf(" prefix6 %s/%u", abuf, cfg->plen6);
ipfw(8): Fix most warnings with the default WARNS level. - Add missing const and static qualifiers. - Avoid shadowing the global "co" by renaming it to "g_co". - Avoid mixing signedness in loop bound checks. - Leave -Wcast-align warnings disabled for now. Reviewed by: ae, melifaro MFC after: 2 weeks Differential Revision: https://reviews.freebsd.org/D25456
2020-07-13 17:51:04 +00:00
if (g_co.verbose || cfg->states_chunks > 1)
Reapply r345274 with build fixes for 32-bit architectures. Update NAT64LSN implementation: o most of data structures and relations were modified to be able support large number of translation states. Now each supported protocol can use full ports range. Ports groups now are belongs to IPv4 alias addresses, not hosts. Each ports group can keep several states chunks. This is controlled with new `states_chunks` config option. States chunks allow to have several translation states for single alias address and port, but for different destination addresses. o by default all hash tables now use jenkins hash. o ConcurrencyKit and epoch(9) is used to make NAT64LSN lockless on fast path. o one NAT64LSN instance now can be used to handle several IPv6 prefixes, special prefix "::" value should be used for this purpose when instance is created. o due to modified internal data structures relations, the socket opcode that does states listing was changed. Obtained from: Yandex LLC MFC after: 1 month Sponsored by: Yandex LLC
2019-03-19 10:57:03 +00:00
printf(" states_chunks %u", cfg->states_chunks);
ipfw(8): Fix most warnings with the default WARNS level. - Add missing const and static qualifiers. - Avoid shadowing the global "co" by renaming it to "g_co". - Avoid mixing signedness in loop bound checks. - Leave -Wcast-align warnings disabled for now. Reviewed by: ae, melifaro MFC after: 2 weeks Differential Revision: https://reviews.freebsd.org/D25456
2020-07-13 17:51:04 +00:00
if (g_co.verbose || cfg->nh_delete_delay != NAT64LSN_HOST_AGE)
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
printf(" host_del_age %u", cfg->nh_delete_delay);
ipfw(8): Fix most warnings with the default WARNS level. - Add missing const and static qualifiers. - Avoid shadowing the global "co" by renaming it to "g_co". - Avoid mixing signedness in loop bound checks. - Leave -Wcast-align warnings disabled for now. Reviewed by: ae, melifaro MFC after: 2 weeks Differential Revision: https://reviews.freebsd.org/D25456
2020-07-13 17:51:04 +00:00
if (g_co.verbose || cfg->pg_delete_delay != NAT64LSN_PG_AGE)
Remove extra spaces. MFC after: 1 month
2019-03-19 11:16:42 +00:00
printf(" pg_del_age %u", cfg->pg_delete_delay);
ipfw(8): Fix most warnings with the default WARNS level. - Add missing const and static qualifiers. - Avoid shadowing the global "co" by renaming it to "g_co". - Avoid mixing signedness in loop bound checks. - Leave -Wcast-align warnings disabled for now. Reviewed by: ae, melifaro MFC after: 2 weeks Differential Revision: https://reviews.freebsd.org/D25456
2020-07-13 17:51:04 +00:00
if (g_co.verbose || cfg->st_syn_ttl != NAT64LSN_TCP_SYN_AGE)
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
printf(" tcp_syn_age %u", cfg->st_syn_ttl);
ipfw(8): Fix most warnings with the default WARNS level. - Add missing const and static qualifiers. - Avoid shadowing the global "co" by renaming it to "g_co". - Avoid mixing signedness in loop bound checks. - Leave -Wcast-align warnings disabled for now. Reviewed by: ae, melifaro MFC after: 2 weeks Differential Revision: https://reviews.freebsd.org/D25456
2020-07-13 17:51:04 +00:00
if (g_co.verbose || cfg->st_close_ttl != NAT64LSN_TCP_FIN_AGE)
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
printf(" tcp_close_age %u", cfg->st_close_ttl);
ipfw(8): Fix most warnings with the default WARNS level. - Add missing const and static qualifiers. - Avoid shadowing the global "co" by renaming it to "g_co". - Avoid mixing signedness in loop bound checks. - Leave -Wcast-align warnings disabled for now. Reviewed by: ae, melifaro MFC after: 2 weeks Differential Revision: https://reviews.freebsd.org/D25456
2020-07-13 17:51:04 +00:00
if (g_co.verbose || cfg->st_estab_ttl != NAT64LSN_TCP_EST_AGE)
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
printf(" tcp_est_age %u", cfg->st_estab_ttl);
ipfw(8): Fix most warnings with the default WARNS level. - Add missing const and static qualifiers. - Avoid shadowing the global "co" by renaming it to "g_co". - Avoid mixing signedness in loop bound checks. - Leave -Wcast-align warnings disabled for now. Reviewed by: ae, melifaro MFC after: 2 weeks Differential Revision: https://reviews.freebsd.org/D25456
2020-07-13 17:51:04 +00:00
if (g_co.verbose || cfg->st_udp_ttl != NAT64LSN_UDP_AGE)
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
printf(" udp_age %u", cfg->st_udp_ttl);
ipfw(8): Fix most warnings with the default WARNS level. - Add missing const and static qualifiers. - Avoid shadowing the global "co" by renaming it to "g_co". - Avoid mixing signedness in loop bound checks. - Leave -Wcast-align warnings disabled for now. Reviewed by: ae, melifaro MFC after: 2 weeks Differential Revision: https://reviews.freebsd.org/D25456
2020-07-13 17:51:04 +00:00
if (g_co.verbose || cfg->st_icmp_ttl != NAT64LSN_ICMP_AGE)
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
printf(" icmp_age %u", cfg->st_icmp_ttl);
ipfw(8): Fix most warnings with the default WARNS level. - Add missing const and static qualifiers. - Avoid shadowing the global "co" by renaming it to "g_co". - Avoid mixing signedness in loop bound checks. - Leave -Wcast-align warnings disabled for now. Reviewed by: ae, melifaro MFC after: 2 weeks Differential Revision: https://reviews.freebsd.org/D25456
2020-07-13 17:51:04 +00:00
if (g_co.verbose || cfg->jmaxlen != NAT64LSN_JMAXLEN)
Remove extra spaces. MFC after: 1 month
2019-03-19 11:16:42 +00:00
printf(" jmaxlen %u", cfg->jmaxlen);
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
if (cfg->flags & NAT64_LOG)
printf(" log");
Modify struct nat64_config. Add second IPv6 prefix to generic config structure and rename another fields to conform to RFC6877. Now it contains two prefixes and length: PLAT is provider-side translator that translates N:1 global IPv6 addresses to global IPv4 addresses. CLAT is customer-side translator (XLAT) that algorithmically translates 1:1 IPv4 addresses to global IPv6 addresses. Use PLAT prefix in stateless (nat64stl) and stateful (nat64lsn) translators. Modify nat64_extract_ip4() and nat64_embed_ip4() functions to accept prefix length and use plat_plen to specify prefix length. Retire net.inet.ip.fw.nat64_allow_private sysctl variable. Add NAT64_ALLOW_PRIVATE flag and use "allow_private" config option to configure this ability separately for each NAT64 instance. Obtained from: Yandex LLC MFC after: 1 month Sponsored by: Yandex LLC
2019-03-18 10:39:14 +00:00
if (cfg->flags & NAT64_ALLOW_PRIVATE)
printf(" allow_private");
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
printf("\n");
return (0);
}
static int
ipfw(8): Fix most warnings with the default WARNS level. - Add missing const and static qualifiers. - Avoid shadowing the global "co" by renaming it to "g_co". - Avoid mixing signedness in loop bound checks. - Leave -Wcast-align warnings disabled for now. Reviewed by: ae, melifaro MFC after: 2 weeks Differential Revision: https://reviews.freebsd.org/D25456
2020-07-13 17:51:04 +00:00
nat64lsn_destroy_cb(ipfw_nat64lsn_cfg *cfg, const char *name __unused,
uint8_t set)
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
{
ipfw(8): Fix most warnings with the default WARNS level. - Add missing const and static qualifiers. - Avoid shadowing the global "co" by renaming it to "g_co". - Avoid mixing signedness in loop bound checks. - Leave -Wcast-align warnings disabled for now. Reviewed by: ae, melifaro MFC after: 2 weeks Differential Revision: https://reviews.freebsd.org/D25456
2020-07-13 17:51:04 +00:00
if (g_co.use_set != 0 && cfg->set != set)
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
return (ESRCH);
nat64lsn_destroy(cfg->name, cfg->set);
return (0);
}
/*
* Compare nat64lsn instances names.
* Honor number comparison.
*/
static int
nat64name_cmp(const void *a, const void *b)
{
ipfw(8): Fix most warnings with the default WARNS level. - Add missing const and static qualifiers. - Avoid shadowing the global "co" by renaming it to "g_co". - Avoid mixing signedness in loop bound checks. - Leave -Wcast-align warnings disabled for now. Reviewed by: ae, melifaro MFC after: 2 weeks Differential Revision: https://reviews.freebsd.org/D25456
2020-07-13 17:51:04 +00:00
const ipfw_nat64lsn_cfg *ca, *cb;
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
ipfw(8): Fix most warnings with the default WARNS level. - Add missing const and static qualifiers. - Avoid shadowing the global "co" by renaming it to "g_co". - Avoid mixing signedness in loop bound checks. - Leave -Wcast-align warnings disabled for now. Reviewed by: ae, melifaro MFC after: 2 weeks Differential Revision: https://reviews.freebsd.org/D25456
2020-07-13 17:51:04 +00:00
ca = (const ipfw_nat64lsn_cfg *)a;
cb = (const ipfw_nat64lsn_cfg *)b;
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
if (ca->set > cb->set)
return (1);
else if (ca->set < cb->set)
return (-1);
return (stringnum_cmp(ca->name, cb->name));
}
/*
* Retrieves nat64lsn instance list from kernel,
* optionally sorts it and calls requested function for each instance.
*
* Request: [ ipfw_obj_lheader ]
* Reply: [ ipfw_obj_lheader ipfw_nat64lsn_cfg x N ]
*/
static int
nat64lsn_foreach(nat64lsn_cb_t *f, const char *name, uint8_t set, int sort)
{
ipfw_obj_lheader *olh;
ipfw_nat64lsn_cfg *cfg;
size_t sz;
ipfw(8): Fix most warnings with the default WARNS level. - Add missing const and static qualifiers. - Avoid shadowing the global "co" by renaming it to "g_co". - Avoid mixing signedness in loop bound checks. - Leave -Wcast-align warnings disabled for now. Reviewed by: ae, melifaro MFC after: 2 weeks Differential Revision: https://reviews.freebsd.org/D25456
2020-07-13 17:51:04 +00:00
uint32_t i;
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
/* Start with reasonable default */
sz = sizeof(*olh) + 16 * sizeof(ipfw_nat64lsn_cfg);
for (;;) {
if ((olh = calloc(1, sz)) == NULL)
return (ENOMEM);
olh->size = sz;
if (do_get3(IP_FW_NAT64LSN_LIST, &olh->opheader, &sz) != 0) {
sz = olh->size;
free(olh);
if (errno != ENOMEM)
return (errno);
continue;
}
if (sort != 0)
qsort(olh + 1, olh->count, olh->objsize,
nat64name_cmp);
cfg = (ipfw_nat64lsn_cfg *)(olh + 1);
for (i = 0; i < olh->count; i++) {
ipfw: Remove set but unused variables. Reported by: GCC Differential Revision: https://reviews.freebsd.org/D40654
2023-06-27 17:19:32 +00:00
(void)f(cfg, name, set); /* Ignore errors for now */
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
cfg = (ipfw_nat64lsn_cfg *)((caddr_t)cfg +
olh->objsize);
}
free(olh);
break;
}
return (0);
}
Reference in a new issue Copy permalink