freebsd-src/sys/dev/stge/if_stge.c

2606 lines
64 KiB
C
Raw Normal View History

/* $NetBSD: if_stge.c,v 1.32 2005/12/11 12:22:49 christos Exp $ */
/*-
* Copyright (c) 2001 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Jason R. Thorpe.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Device driver for the Sundance Tech. TC9021 10/100/1000
* Ethernet controller.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#ifdef HAVE_KERNEL_OPTION_HEADERS
#include "opt_device_polling.h"
#endif
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/endian.h>
#include <sys/mbuf.h>
#include <sys/malloc.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/socket.h>
#include <sys/sockio.h>
#include <sys/sysctl.h>
#include <sys/taskqueue.h>
#include <net/bpf.h>
#include <net/ethernet.h>
#include <net/if.h>
#include <net/if_var.h>
#include <net/if_dl.h>
#include <net/if_media.h>
#include <net/if_types.h>
#include <net/if_vlan_var.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <sys/bus.h>
#include <sys/rman.h>
#include <dev/mii/mii.h>
#include <dev/mii/mii_bitbang.h>
#include <dev/mii/miivar.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>
#include <dev/stge/if_stgereg.h>
#define STGE_CSUM_FEATURES (CSUM_IP | CSUM_TCP | CSUM_UDP)
MODULE_DEPEND(stge, pci, 1, 1, 1);
MODULE_DEPEND(stge, ether, 1, 1, 1);
MODULE_DEPEND(stge, miibus, 1, 1, 1);
/* "device miibus" required. See GENERIC if you get errors here. */
#include "miibus_if.h"
/*
* Devices supported by this driver.
*/
static const struct stge_product {
uint16_t stge_vendorid;
uint16_t stge_deviceid;
const char *stge_name;
} stge_products[] = {
{ VENDOR_SUNDANCETI, DEVICEID_SUNDANCETI_ST1023,
"Sundance ST-1023 Gigabit Ethernet" },
{ VENDOR_SUNDANCETI, DEVICEID_SUNDANCETI_ST2021,
"Sundance ST-2021 Gigabit Ethernet" },
{ VENDOR_TAMARACK, DEVICEID_TAMARACK_TC9021,
"Tamarack TC9021 Gigabit Ethernet" },
{ VENDOR_TAMARACK, DEVICEID_TAMARACK_TC9021_ALT,
"Tamarack TC9021 Gigabit Ethernet" },
/*
* The Sundance sample boards use the Sundance vendor ID,
* but the Tamarack product ID.
*/
{ VENDOR_SUNDANCETI, DEVICEID_TAMARACK_TC9021,
"Sundance TC9021 Gigabit Ethernet" },
{ VENDOR_SUNDANCETI, DEVICEID_TAMARACK_TC9021_ALT,
"Sundance TC9021 Gigabit Ethernet" },
{ VENDOR_DLINK, DEVICEID_DLINK_DL4000,
"D-Link DL-4000 Gigabit Ethernet" },
{ VENDOR_ANTARES, DEVICEID_ANTARES_TC9021,
"Antares Gigabit Ethernet" }
};
static int stge_probe(device_t);
static int stge_attach(device_t);
static int stge_detach(device_t);
static int stge_shutdown(device_t);
static int stge_suspend(device_t);
static int stge_resume(device_t);
static int stge_encap(struct stge_softc *, struct mbuf **);
static void stge_start(struct ifnet *);
static void stge_start_locked(struct ifnet *);
static void stge_watchdog(struct stge_softc *);
static int stge_ioctl(struct ifnet *, u_long, caddr_t);
static void stge_init(void *);
static void stge_init_locked(struct stge_softc *);
static void stge_vlan_setup(struct stge_softc *);
static void stge_stop(struct stge_softc *);
static void stge_start_tx(struct stge_softc *);
static void stge_start_rx(struct stge_softc *);
static void stge_stop_tx(struct stge_softc *);
static void stge_stop_rx(struct stge_softc *);
static void stge_reset(struct stge_softc *, uint32_t);
static int stge_eeprom_wait(struct stge_softc *);
static void stge_read_eeprom(struct stge_softc *, int, uint16_t *);
static void stge_tick(void *);
static void stge_stats_update(struct stge_softc *);
static void stge_set_filter(struct stge_softc *);
static void stge_set_multi(struct stge_softc *);
static void stge_link_task(void *, int);
static void stge_intr(void *);
static __inline int stge_tx_error(struct stge_softc *);
static void stge_txeof(struct stge_softc *);
static int stge_rxeof(struct stge_softc *);
static __inline void stge_discard_rxbuf(struct stge_softc *, int);
static int stge_newbuf(struct stge_softc *, int);
#ifndef __NO_STRICT_ALIGNMENT
static __inline struct mbuf *stge_fixup_rx(struct stge_softc *, struct mbuf *);
#endif
static int stge_miibus_readreg(device_t, int, int);
static int stge_miibus_writereg(device_t, int, int, int);
static void stge_miibus_statchg(device_t);
static int stge_mediachange(struct ifnet *);
static void stge_mediastatus(struct ifnet *, struct ifmediareq *);
static void stge_dmamap_cb(void *, bus_dma_segment_t *, int, int);
static int stge_dma_alloc(struct stge_softc *);
static void stge_dma_free(struct stge_softc *);
static void stge_dma_wait(struct stge_softc *);
static void stge_init_tx_ring(struct stge_softc *);
static int stge_init_rx_ring(struct stge_softc *);
#ifdef DEVICE_POLLING
static int stge_poll(struct ifnet *, enum poll_cmd, int);
#endif
static void stge_setwol(struct stge_softc *);
static int sysctl_int_range(SYSCTL_HANDLER_ARGS, int, int);
static int sysctl_hw_stge_rxint_nframe(SYSCTL_HANDLER_ARGS);
static int sysctl_hw_stge_rxint_dmawait(SYSCTL_HANDLER_ARGS);
/*
* MII bit-bang glue
*/
static uint32_t stge_mii_bitbang_read(device_t);
static void stge_mii_bitbang_write(device_t, uint32_t);
static const struct mii_bitbang_ops stge_mii_bitbang_ops = {
stge_mii_bitbang_read,
stge_mii_bitbang_write,
{
PC_MgmtData, /* MII_BIT_MDO */
PC_MgmtData, /* MII_BIT_MDI */
PC_MgmtClk, /* MII_BIT_MDC */
PC_MgmtDir, /* MII_BIT_DIR_HOST_PHY */
0, /* MII_BIT_DIR_PHY_HOST */
}
};
static device_method_t stge_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, stge_probe),
DEVMETHOD(device_attach, stge_attach),
DEVMETHOD(device_detach, stge_detach),
DEVMETHOD(device_shutdown, stge_shutdown),
DEVMETHOD(device_suspend, stge_suspend),
DEVMETHOD(device_resume, stge_resume),
/* MII interface */
DEVMETHOD(miibus_readreg, stge_miibus_readreg),
DEVMETHOD(miibus_writereg, stge_miibus_writereg),
DEVMETHOD(miibus_statchg, stge_miibus_statchg),
DEVMETHOD_END
};
static driver_t stge_driver = {
"stge",
stge_methods,
sizeof(struct stge_softc)
};
static devclass_t stge_devclass;
DRIVER_MODULE(stge, pci, stge_driver, stge_devclass, 0, 0);
DRIVER_MODULE(miibus, stge, miibus_driver, miibus_devclass, 0, 0);
static struct resource_spec stge_res_spec_io[] = {
{ SYS_RES_IOPORT, PCIR_BAR(0), RF_ACTIVE },
{ SYS_RES_IRQ, 0, RF_ACTIVE | RF_SHAREABLE },
{ -1, 0, 0 }
};
static struct resource_spec stge_res_spec_mem[] = {
{ SYS_RES_MEMORY, PCIR_BAR(1), RF_ACTIVE },
{ SYS_RES_IRQ, 0, RF_ACTIVE | RF_SHAREABLE },
{ -1, 0, 0 }
};
/*
* stge_mii_bitbang_read: [mii bit-bang interface function]
*
* Read the MII serial port for the MII bit-bang module.
*/
static uint32_t
stge_mii_bitbang_read(device_t dev)
{
struct stge_softc *sc;
uint32_t val;
sc = device_get_softc(dev);
val = CSR_READ_1(sc, STGE_PhyCtrl);
CSR_BARRIER(sc, STGE_PhyCtrl, 1,
BUS_SPACE_BARRIER_READ | BUS_SPACE_BARRIER_WRITE);
return (val);
}
/*
* stge_mii_bitbang_write: [mii big-bang interface function]
*
* Write the MII serial port for the MII bit-bang module.
*/
static void
stge_mii_bitbang_write(device_t dev, uint32_t val)
{
struct stge_softc *sc;
sc = device_get_softc(dev);
CSR_WRITE_1(sc, STGE_PhyCtrl, val);
CSR_BARRIER(sc, STGE_PhyCtrl, 1,
BUS_SPACE_BARRIER_READ | BUS_SPACE_BARRIER_WRITE);
}
/*
* sc_miibus_readreg: [mii interface function]
*
* Read a PHY register on the MII of the TC9021.
*/
static int
stge_miibus_readreg(device_t dev, int phy, int reg)
{
struct stge_softc *sc;
int error, val;
sc = device_get_softc(dev);
if (reg == STGE_PhyCtrl) {
/* XXX allow ip1000phy read STGE_PhyCtrl register. */
STGE_MII_LOCK(sc);
error = CSR_READ_1(sc, STGE_PhyCtrl);
STGE_MII_UNLOCK(sc);
return (error);
}
STGE_MII_LOCK(sc);
val = mii_bitbang_readreg(dev, &stge_mii_bitbang_ops, phy, reg);
STGE_MII_UNLOCK(sc);
return (val);
}
/*
* stge_miibus_writereg: [mii interface function]
*
* Write a PHY register on the MII of the TC9021.
*/
static int
stge_miibus_writereg(device_t dev, int phy, int reg, int val)
{
struct stge_softc *sc;
sc = device_get_softc(dev);
STGE_MII_LOCK(sc);
mii_bitbang_writereg(dev, &stge_mii_bitbang_ops, phy, reg, val);
STGE_MII_UNLOCK(sc);
return (0);
}
/*
* stge_miibus_statchg: [mii interface function]
*
* Callback from MII layer when media changes.
*/
static void
stge_miibus_statchg(device_t dev)
{
struct stge_softc *sc;
sc = device_get_softc(dev);
taskqueue_enqueue(taskqueue_swi, &sc->sc_link_task);
}
/*
* stge_mediastatus: [ifmedia interface function]
*
* Get the current interface media status.
*/
static void
stge_mediastatus(struct ifnet *ifp, struct ifmediareq *ifmr)
{
struct stge_softc *sc;
struct mii_data *mii;
sc = ifp->if_softc;
mii = device_get_softc(sc->sc_miibus);
mii_pollstat(mii);
ifmr->ifm_status = mii->mii_media_status;
ifmr->ifm_active = mii->mii_media_active;
}
/*
* stge_mediachange: [ifmedia interface function]
*
* Set hardware to newly-selected media.
*/
static int
stge_mediachange(struct ifnet *ifp)
{
struct stge_softc *sc;
struct mii_data *mii;
sc = ifp->if_softc;
mii = device_get_softc(sc->sc_miibus);
mii_mediachg(mii);
return (0);
}
static int
stge_eeprom_wait(struct stge_softc *sc)
{
int i;
for (i = 0; i < STGE_TIMEOUT; i++) {
DELAY(1000);
if ((CSR_READ_2(sc, STGE_EepromCtrl) & EC_EepromBusy) == 0)
return (0);
}
return (1);
}
/*
* stge_read_eeprom:
*
* Read data from the serial EEPROM.
*/
static void
stge_read_eeprom(struct stge_softc *sc, int offset, uint16_t *data)
{
if (stge_eeprom_wait(sc))
device_printf(sc->sc_dev, "EEPROM failed to come ready\n");
CSR_WRITE_2(sc, STGE_EepromCtrl,
EC_EepromAddress(offset) | EC_EepromOpcode(EC_OP_RR));
if (stge_eeprom_wait(sc))
device_printf(sc->sc_dev, "EEPROM read timed out\n");
*data = CSR_READ_2(sc, STGE_EepromData);
}
static int
stge_probe(device_t dev)
{
const struct stge_product *sp;
int i;
uint16_t vendor, devid;
vendor = pci_get_vendor(dev);
devid = pci_get_device(dev);
sp = stge_products;
for (i = 0; i < sizeof(stge_products)/sizeof(stge_products[0]);
i++, sp++) {
if (vendor == sp->stge_vendorid &&
devid == sp->stge_deviceid) {
device_set_desc(dev, sp->stge_name);
return (BUS_PROBE_DEFAULT);
}
}
return (ENXIO);
}
static int
stge_attach(device_t dev)
{
struct stge_softc *sc;
struct ifnet *ifp;
uint8_t enaddr[ETHER_ADDR_LEN];
int error, flags, i;
uint16_t cmd;
uint32_t val;
error = 0;
sc = device_get_softc(dev);
sc->sc_dev = dev;
mtx_init(&sc->sc_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK,
MTX_DEF);
mtx_init(&sc->sc_mii_mtx, "stge_mii_mutex", NULL, MTX_DEF);
callout_init_mtx(&sc->sc_tick_ch, &sc->sc_mtx, 0);
TASK_INIT(&sc->sc_link_task, 0, stge_link_task, sc);
/*
* Map the device.
*/
pci_enable_busmaster(dev);
cmd = pci_read_config(dev, PCIR_COMMAND, 2);
val = pci_read_config(dev, PCIR_BAR(1), 4);
if (PCI_BAR_IO(val))
sc->sc_spec = stge_res_spec_mem;
else {
val = pci_read_config(dev, PCIR_BAR(0), 4);
if (!PCI_BAR_IO(val)) {
device_printf(sc->sc_dev, "couldn't locate IO BAR\n");
error = ENXIO;
goto fail;
}
sc->sc_spec = stge_res_spec_io;
}
error = bus_alloc_resources(dev, sc->sc_spec, sc->sc_res);
if (error != 0) {
device_printf(dev, "couldn't allocate %s resources\n",
sc->sc_spec == stge_res_spec_mem ? "memory" : "I/O");
goto fail;
}
sc->sc_rev = pci_get_revid(dev);
SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev),
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), OID_AUTO,
"rxint_nframe", CTLTYPE_INT|CTLFLAG_RW, &sc->sc_rxint_nframe, 0,
sysctl_hw_stge_rxint_nframe, "I", "stge rx interrupt nframe");
SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev),
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), OID_AUTO,
"rxint_dmawait", CTLTYPE_INT|CTLFLAG_RW, &sc->sc_rxint_dmawait, 0,
sysctl_hw_stge_rxint_dmawait, "I", "stge rx interrupt dmawait");
/* Pull in device tunables. */
sc->sc_rxint_nframe = STGE_RXINT_NFRAME_DEFAULT;
error = resource_int_value(device_get_name(dev), device_get_unit(dev),
"rxint_nframe", &sc->sc_rxint_nframe);
if (error == 0) {
if (sc->sc_rxint_nframe < STGE_RXINT_NFRAME_MIN ||
sc->sc_rxint_nframe > STGE_RXINT_NFRAME_MAX) {
device_printf(dev, "rxint_nframe value out of range; "
"using default: %d\n", STGE_RXINT_NFRAME_DEFAULT);
sc->sc_rxint_nframe = STGE_RXINT_NFRAME_DEFAULT;
}
}
sc->sc_rxint_dmawait = STGE_RXINT_DMAWAIT_DEFAULT;
error = resource_int_value(device_get_name(dev), device_get_unit(dev),
"rxint_dmawait", &sc->sc_rxint_dmawait);
if (error == 0) {
if (sc->sc_rxint_dmawait < STGE_RXINT_DMAWAIT_MIN ||
sc->sc_rxint_dmawait > STGE_RXINT_DMAWAIT_MAX) {
device_printf(dev, "rxint_dmawait value out of range; "
"using default: %d\n", STGE_RXINT_DMAWAIT_DEFAULT);
sc->sc_rxint_dmawait = STGE_RXINT_DMAWAIT_DEFAULT;
}
}
if ((error = stge_dma_alloc(sc) != 0))
goto fail;
/*
* Determine if we're copper or fiber. It affects how we
* reset the card.
*/
if (CSR_READ_4(sc, STGE_AsicCtrl) & AC_PhyMedia)
sc->sc_usefiber = 1;
else
sc->sc_usefiber = 0;
/* Load LED configuration from EEPROM. */
stge_read_eeprom(sc, STGE_EEPROM_LEDMode, &sc->sc_led);
/*
* Reset the chip to a known state.
*/
STGE_LOCK(sc);
stge_reset(sc, STGE_RESET_FULL);
STGE_UNLOCK(sc);
/*
* Reading the station address from the EEPROM doesn't seem
* to work, at least on my sample boards. Instead, since
* the reset sequence does AutoInit, read it from the station
* address registers. For Sundance 1023 you can only read it
* from EEPROM.
*/
if (pci_get_device(dev) != DEVICEID_SUNDANCETI_ST1023) {
uint16_t v;
v = CSR_READ_2(sc, STGE_StationAddress0);
enaddr[0] = v & 0xff;
enaddr[1] = v >> 8;
v = CSR_READ_2(sc, STGE_StationAddress1);
enaddr[2] = v & 0xff;
enaddr[3] = v >> 8;
v = CSR_READ_2(sc, STGE_StationAddress2);
enaddr[4] = v & 0xff;
enaddr[5] = v >> 8;
sc->sc_stge1023 = 0;
} else {
uint16_t myaddr[ETHER_ADDR_LEN / 2];
for (i = 0; i <ETHER_ADDR_LEN / 2; i++) {
stge_read_eeprom(sc, STGE_EEPROM_StationAddress0 + i,
&myaddr[i]);
myaddr[i] = le16toh(myaddr[i]);
}
bcopy(myaddr, enaddr, sizeof(enaddr));
sc->sc_stge1023 = 1;
}
ifp = sc->sc_ifp = if_alloc(IFT_ETHER);
if (ifp == NULL) {
device_printf(sc->sc_dev, "failed to if_alloc()\n");
error = ENXIO;
goto fail;
}
ifp->if_softc = sc;
if_initname(ifp, device_get_name(dev), device_get_unit(dev));
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
ifp->if_ioctl = stge_ioctl;
ifp->if_start = stge_start;
ifp->if_init = stge_init;
ifp->if_snd.ifq_drv_maxlen = STGE_TX_RING_CNT - 1;
IFQ_SET_MAXLEN(&ifp->if_snd, ifp->if_snd.ifq_drv_maxlen);
IFQ_SET_READY(&ifp->if_snd);
/* Revision B3 and earlier chips have checksum bug. */
if (sc->sc_rev >= 0x0c) {
ifp->if_hwassist = STGE_CSUM_FEATURES;
ifp->if_capabilities = IFCAP_HWCSUM;
} else {
ifp->if_hwassist = 0;
ifp->if_capabilities = 0;
}
ifp->if_capabilities |= IFCAP_WOL_MAGIC;
ifp->if_capenable = ifp->if_capabilities;
/*
* Read some important bits from the PhyCtrl register.
*/
sc->sc_PhyCtrl = CSR_READ_1(sc, STGE_PhyCtrl) &
(PC_PhyDuplexPolarity | PC_PhyLnkPolarity);
/* Set up MII bus. */
o Flesh out the generic IEEE 802.3 annex 31B full duplex flow control support in mii(4): - Merge generic flow control advertisement (which can be enabled by passing by MIIF_DOPAUSE to mii_attach(9)) and parsing support from NetBSD into mii_physubr.c and ukphy_subr.c. Unlike as in NetBSD, IFM_FLOW isn't implemented as a global option via the "don't care mask" but instead as a media specific option this. This has the following advantages: o allows flow control advertisement with autonegotiation to be turned on and off via ifconfig(8) with the default typically being off (though MIIF_FORCEPAUSE has been added causing flow control to be always advertised, allowing to easily MFC this changes for drivers that previously used home-grown support for flow control that behaved that way without breaking POLA) o allows to deal with PHY drivers where flow control advertisement with manual selection doesn't work or at least isn't implemented, like it's the case with brgphy(4), e1000phy(4) and ip1000phy(4), by setting MIIF_NOMANPAUSE o the available combinations of media options are readily available from the `ifconfig -m` output - Add IFM_FLOW to IFM_SHARED_OPTION_DESCRIPTIONS and IFM_ETH_RXPAUSE and IFM_ETH_TXPAUSE to IFM_SUBTYPE_ETHERNET_OPTION_DESCRIPTIONS so these are understood by ifconfig(8). o Make the master/slave support in mii(4) actually usable: - Change IFM_ETH_MASTER from being implemented as a global option via the "don't care mask" to a media specific one as it actually is only applicable to IFM_1000_T to date. - Let mii_phy_setmedia() set GTCR_MAN_MS in IFM_1000_T slave mode to actually configure manually selected slave mode (like we also do in the PHY specific implementations). - Add IFM_ETH_MASTER to IFM_SUBTYPE_ETHERNET_OPTION_DESCRIPTIONS so it is understood by ifconfig(8). o Switch bge(4), bce(4), msk(4), nfe(4) and stge(4) along with brgphy(4), e1000phy(4) and ip1000phy(4) to use the generic flow control support instead of home-grown solutions via IFM_FLAGs. This includes changing these PHY drivers and smcphy(4) to no longer unconditionally advertise support for flow control but only if the selected media has IFM_FLOW set (or MIIF_FORCEPAUSE is set) and implemented for these media variants, i.e. typically only for copper. o Switch brgphy(4), ciphy(4), e1000phy(4) and ip1000phy(4) to report and set IFM_1000_T master mode via IFM_ETH_MASTER instead of via IFF_LINK0 and some IFM_FLAGn. o Switch brgphy(4) to add at least the the supported copper media based on the contents of the BMSR via mii_phy_add_media() instead of hardcoding them. The latter approach seems to have developed historically, besides causing unnecessary code duplication it was also undesirable because brgphy_mii_phy_auto() already based the capability advertisement on the contents of the BMSR though. o Let brgphy(4) set IFM_1000_T master mode on all supported PHY and not just BCM5701. Apparently this was a misinterpretation of a workaround in the Linux tg3 driver; BCM5701 seem to require RGPHY_1000CTL_MSE and BRGPHY_1000CTL_MSC to be set when configuring autonegotiation but this doesn't mean we can't set these as well on other PHYs for manual media selection. o Let ukphy_status() report IFM_1000_T master mode via IFM_ETH_MASTER so IFM_1000_T master mode support now is generally available with all PHY drivers. o Don't let e1000phy(4) set master/slave bits for IFM_1000_SX as it's not applicable there. Reviewed by: yongari (plus additional testing) Obtained from: NetBSD (partially), OpenBSD (partially) MFC after: 2 weeks
2010-11-14 13:26:10 +00:00
flags = MIIF_DOPAUSE;
if (sc->sc_rev >= 0x40 && sc->sc_rev <= 0x4e)
flags |= MIIF_MACPRIV0;
error = mii_attach(sc->sc_dev, &sc->sc_miibus, ifp, stge_mediachange,
stge_mediastatus, BMSR_DEFCAPMASK, MII_PHY_ANY, MII_OFFSET_ANY,
flags);
if (error != 0) {
device_printf(sc->sc_dev, "attaching PHYs failed\n");
goto fail;
}
ether_ifattach(ifp, enaddr);
/* VLAN capability setup */
ifp->if_capabilities |= IFCAP_VLAN_MTU | IFCAP_VLAN_HWTAGGING;
if (sc->sc_rev >= 0x0c)
ifp->if_capabilities |= IFCAP_VLAN_HWCSUM;
ifp->if_capenable = ifp->if_capabilities;
#ifdef DEVICE_POLLING
ifp->if_capabilities |= IFCAP_POLLING;
#endif
/*
* Tell the upper layer(s) we support long frames.
* Must appear after the call to ether_ifattach() because
* ether_ifattach() sets ifi_hdrlen to the default value.
*/
ifp->if_hdrlen = sizeof(struct ether_vlan_header);
/*
* The manual recommends disabling early transmit, so we
* do. It's disabled anyway, if using IP checksumming,
* since the entire packet must be in the FIFO in order
* for the chip to perform the checksum.
*/
sc->sc_txthresh = 0x0fff;
/*
* Disable MWI if the PCI layer tells us to.
*/
sc->sc_DMACtrl = 0;
if ((cmd & PCIM_CMD_MWRICEN) == 0)
sc->sc_DMACtrl |= DMAC_MWIDisable;
/*
* Hookup IRQ
*/
error = bus_setup_intr(dev, sc->sc_res[1], INTR_TYPE_NET | INTR_MPSAFE,
NULL, stge_intr, sc, &sc->sc_ih);
if (error != 0) {
ether_ifdetach(ifp);
device_printf(sc->sc_dev, "couldn't set up IRQ\n");
sc->sc_ifp = NULL;
goto fail;
}
fail:
if (error != 0)
stge_detach(dev);
return (error);
}
static int
stge_detach(device_t dev)
{
struct stge_softc *sc;
struct ifnet *ifp;
sc = device_get_softc(dev);
ifp = sc->sc_ifp;
#ifdef DEVICE_POLLING
if (ifp && ifp->if_capenable & IFCAP_POLLING)
ether_poll_deregister(ifp);
#endif
if (device_is_attached(dev)) {
STGE_LOCK(sc);
/* XXX */
sc->sc_detach = 1;
stge_stop(sc);
STGE_UNLOCK(sc);
callout_drain(&sc->sc_tick_ch);
taskqueue_drain(taskqueue_swi, &sc->sc_link_task);
ether_ifdetach(ifp);
}
if (sc->sc_miibus != NULL) {
device_delete_child(dev, sc->sc_miibus);
sc->sc_miibus = NULL;
}
bus_generic_detach(dev);
stge_dma_free(sc);
if (ifp != NULL) {
if_free(ifp);
sc->sc_ifp = NULL;
}
if (sc->sc_ih) {
bus_teardown_intr(dev, sc->sc_res[1], sc->sc_ih);
sc->sc_ih = NULL;
}
bus_release_resources(dev, sc->sc_spec, sc->sc_res);
mtx_destroy(&sc->sc_mii_mtx);
mtx_destroy(&sc->sc_mtx);
return (0);
}
struct stge_dmamap_arg {
bus_addr_t stge_busaddr;
};
static void
stge_dmamap_cb(void *arg, bus_dma_segment_t *segs, int nseg, int error)
{
struct stge_dmamap_arg *ctx;
if (error != 0)
return;
ctx = (struct stge_dmamap_arg *)arg;
ctx->stge_busaddr = segs[0].ds_addr;
}
static int
stge_dma_alloc(struct stge_softc *sc)
{
struct stge_dmamap_arg ctx;
struct stge_txdesc *txd;
struct stge_rxdesc *rxd;
int error, i;
/* create parent tag. */
error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev),/* parent */
1, 0, /* algnmnt, boundary */
STGE_DMA_MAXADDR, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
BUS_SPACE_MAXSIZE_32BIT, /* maxsize */
0, /* nsegments */
BUS_SPACE_MAXSIZE_32BIT, /* maxsegsize */
0, /* flags */
NULL, NULL, /* lockfunc, lockarg */
&sc->sc_cdata.stge_parent_tag);
if (error != 0) {
device_printf(sc->sc_dev, "failed to create parent DMA tag\n");
goto fail;
}
/* create tag for Tx ring. */
error = bus_dma_tag_create(sc->sc_cdata.stge_parent_tag,/* parent */
STGE_RING_ALIGN, 0, /* algnmnt, boundary */
BUS_SPACE_MAXADDR_32BIT, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
STGE_TX_RING_SZ, /* maxsize */
1, /* nsegments */
STGE_TX_RING_SZ, /* maxsegsize */
0, /* flags */
NULL, NULL, /* lockfunc, lockarg */
&sc->sc_cdata.stge_tx_ring_tag);
if (error != 0) {
device_printf(sc->sc_dev,
"failed to allocate Tx ring DMA tag\n");
goto fail;
}
/* create tag for Rx ring. */
error = bus_dma_tag_create(sc->sc_cdata.stge_parent_tag,/* parent */
STGE_RING_ALIGN, 0, /* algnmnt, boundary */
BUS_SPACE_MAXADDR_32BIT, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
STGE_RX_RING_SZ, /* maxsize */
1, /* nsegments */
STGE_RX_RING_SZ, /* maxsegsize */
0, /* flags */
NULL, NULL, /* lockfunc, lockarg */
&sc->sc_cdata.stge_rx_ring_tag);
if (error != 0) {
device_printf(sc->sc_dev,
"failed to allocate Rx ring DMA tag\n");
goto fail;
}
/* create tag for Tx buffers. */
error = bus_dma_tag_create(sc->sc_cdata.stge_parent_tag,/* parent */
1, 0, /* algnmnt, boundary */
BUS_SPACE_MAXADDR, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
MCLBYTES * STGE_MAXTXSEGS, /* maxsize */
STGE_MAXTXSEGS, /* nsegments */
MCLBYTES, /* maxsegsize */
0, /* flags */
NULL, NULL, /* lockfunc, lockarg */
&sc->sc_cdata.stge_tx_tag);
if (error != 0) {
device_printf(sc->sc_dev, "failed to allocate Tx DMA tag\n");
goto fail;
}
/* create tag for Rx buffers. */
error = bus_dma_tag_create(sc->sc_cdata.stge_parent_tag,/* parent */
1, 0, /* algnmnt, boundary */
BUS_SPACE_MAXADDR, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
MCLBYTES, /* maxsize */
1, /* nsegments */
MCLBYTES, /* maxsegsize */
0, /* flags */
NULL, NULL, /* lockfunc, lockarg */
&sc->sc_cdata.stge_rx_tag);
if (error != 0) {
device_printf(sc->sc_dev, "failed to allocate Rx DMA tag\n");
goto fail;
}
/* allocate DMA'able memory and load the DMA map for Tx ring. */
error = bus_dmamem_alloc(sc->sc_cdata.stge_tx_ring_tag,
(void **)&sc->sc_rdata.stge_tx_ring, BUS_DMA_NOWAIT |
BUS_DMA_COHERENT | BUS_DMA_ZERO, &sc->sc_cdata.stge_tx_ring_map);
if (error != 0) {
device_printf(sc->sc_dev,
"failed to allocate DMA'able memory for Tx ring\n");
goto fail;
}
ctx.stge_busaddr = 0;
error = bus_dmamap_load(sc->sc_cdata.stge_tx_ring_tag,
sc->sc_cdata.stge_tx_ring_map, sc->sc_rdata.stge_tx_ring,
STGE_TX_RING_SZ, stge_dmamap_cb, &ctx, BUS_DMA_NOWAIT);
if (error != 0 || ctx.stge_busaddr == 0) {
device_printf(sc->sc_dev,
"failed to load DMA'able memory for Tx ring\n");
goto fail;
}
sc->sc_rdata.stge_tx_ring_paddr = ctx.stge_busaddr;
/* allocate DMA'able memory and load the DMA map for Rx ring. */
error = bus_dmamem_alloc(sc->sc_cdata.stge_rx_ring_tag,
(void **)&sc->sc_rdata.stge_rx_ring, BUS_DMA_NOWAIT |
BUS_DMA_COHERENT | BUS_DMA_ZERO, &sc->sc_cdata.stge_rx_ring_map);
if (error != 0) {
device_printf(sc->sc_dev,
"failed to allocate DMA'able memory for Rx ring\n");
goto fail;
}
ctx.stge_busaddr = 0;
error = bus_dmamap_load(sc->sc_cdata.stge_rx_ring_tag,
sc->sc_cdata.stge_rx_ring_map, sc->sc_rdata.stge_rx_ring,
STGE_RX_RING_SZ, stge_dmamap_cb, &ctx, BUS_DMA_NOWAIT);
if (error != 0 || ctx.stge_busaddr == 0) {
device_printf(sc->sc_dev,
"failed to load DMA'able memory for Rx ring\n");
goto fail;
}
sc->sc_rdata.stge_rx_ring_paddr = ctx.stge_busaddr;
/* create DMA maps for Tx buffers. */
for (i = 0; i < STGE_TX_RING_CNT; i++) {
txd = &sc->sc_cdata.stge_txdesc[i];
txd->tx_m = NULL;
txd->tx_dmamap = 0;
error = bus_dmamap_create(sc->sc_cdata.stge_tx_tag, 0,
&txd->tx_dmamap);
if (error != 0) {
device_printf(sc->sc_dev,
"failed to create Tx dmamap\n");
goto fail;
}
}
/* create DMA maps for Rx buffers. */
if ((error = bus_dmamap_create(sc->sc_cdata.stge_rx_tag, 0,
&sc->sc_cdata.stge_rx_sparemap)) != 0) {
device_printf(sc->sc_dev, "failed to create spare Rx dmamap\n");
goto fail;
}
for (i = 0; i < STGE_RX_RING_CNT; i++) {
rxd = &sc->sc_cdata.stge_rxdesc[i];
rxd->rx_m = NULL;
rxd->rx_dmamap = 0;
error = bus_dmamap_create(sc->sc_cdata.stge_rx_tag, 0,
&rxd->rx_dmamap);
if (error != 0) {
device_printf(sc->sc_dev,
"failed to create Rx dmamap\n");
goto fail;
}
}
fail:
return (error);
}
static void
stge_dma_free(struct stge_softc *sc)
{
struct stge_txdesc *txd;
struct stge_rxdesc *rxd;
int i;
/* Tx ring */
if (sc->sc_cdata.stge_tx_ring_tag) {
if (sc->sc_rdata.stge_tx_ring_paddr)
bus_dmamap_unload(sc->sc_cdata.stge_tx_ring_tag,
sc->sc_cdata.stge_tx_ring_map);
if (sc->sc_rdata.stge_tx_ring)
bus_dmamem_free(sc->sc_cdata.stge_tx_ring_tag,
sc->sc_rdata.stge_tx_ring,
sc->sc_cdata.stge_tx_ring_map);
sc->sc_rdata.stge_tx_ring = NULL;
sc->sc_rdata.stge_tx_ring_paddr = 0;
bus_dma_tag_destroy(sc->sc_cdata.stge_tx_ring_tag);
sc->sc_cdata.stge_tx_ring_tag = NULL;
}
/* Rx ring */
if (sc->sc_cdata.stge_rx_ring_tag) {
if (sc->sc_rdata.stge_rx_ring_paddr)
bus_dmamap_unload(sc->sc_cdata.stge_rx_ring_tag,
sc->sc_cdata.stge_rx_ring_map);
if (sc->sc_rdata.stge_rx_ring)
bus_dmamem_free(sc->sc_cdata.stge_rx_ring_tag,
sc->sc_rdata.stge_rx_ring,
sc->sc_cdata.stge_rx_ring_map);
sc->sc_rdata.stge_rx_ring = NULL;
sc->sc_rdata.stge_rx_ring_paddr = 0;
bus_dma_tag_destroy(sc->sc_cdata.stge_rx_ring_tag);
sc->sc_cdata.stge_rx_ring_tag = NULL;
}
/* Tx buffers */
if (sc->sc_cdata.stge_tx_tag) {
for (i = 0; i < STGE_TX_RING_CNT; i++) {
txd = &sc->sc_cdata.stge_txdesc[i];
if (txd->tx_dmamap) {
bus_dmamap_destroy(sc->sc_cdata.stge_tx_tag,
txd->tx_dmamap);
txd->tx_dmamap = 0;
}
}
bus_dma_tag_destroy(sc->sc_cdata.stge_tx_tag);
sc->sc_cdata.stge_tx_tag = NULL;
}
/* Rx buffers */
if (sc->sc_cdata.stge_rx_tag) {
for (i = 0; i < STGE_RX_RING_CNT; i++) {
rxd = &sc->sc_cdata.stge_rxdesc[i];
if (rxd->rx_dmamap) {
bus_dmamap_destroy(sc->sc_cdata.stge_rx_tag,
rxd->rx_dmamap);
rxd->rx_dmamap = 0;
}
}
if (sc->sc_cdata.stge_rx_sparemap) {
bus_dmamap_destroy(sc->sc_cdata.stge_rx_tag,
sc->sc_cdata.stge_rx_sparemap);
sc->sc_cdata.stge_rx_sparemap = 0;
}
bus_dma_tag_destroy(sc->sc_cdata.stge_rx_tag);
sc->sc_cdata.stge_rx_tag = NULL;
}
if (sc->sc_cdata.stge_parent_tag) {
bus_dma_tag_destroy(sc->sc_cdata.stge_parent_tag);
sc->sc_cdata.stge_parent_tag = NULL;
}
}
/*
* stge_shutdown:
*
* Make sure the interface is stopped at reboot time.
*/
static int
stge_shutdown(device_t dev)
{
return (stge_suspend(dev));
}
static void
stge_setwol(struct stge_softc *sc)
{
struct ifnet *ifp;
uint8_t v;
STGE_LOCK_ASSERT(sc);
ifp = sc->sc_ifp;
v = CSR_READ_1(sc, STGE_WakeEvent);
/* Disable all WOL bits. */
v &= ~(WE_WakePktEnable | WE_MagicPktEnable | WE_LinkEventEnable |
WE_WakeOnLanEnable);
if ((ifp->if_capenable & IFCAP_WOL_MAGIC) != 0)
v |= WE_MagicPktEnable | WE_WakeOnLanEnable;
CSR_WRITE_1(sc, STGE_WakeEvent, v);
/* Reset Tx and prevent transmission. */
CSR_WRITE_4(sc, STGE_AsicCtrl,
CSR_READ_4(sc, STGE_AsicCtrl) | AC_TxReset);
/*
* TC9021 automatically reset link speed to 100Mbps when it's put
* into sleep so there is no need to try to resetting link speed.
*/
}
static int
stge_suspend(device_t dev)
{
struct stge_softc *sc;
sc = device_get_softc(dev);
STGE_LOCK(sc);
stge_stop(sc);
sc->sc_suspended = 1;
stge_setwol(sc);
STGE_UNLOCK(sc);
return (0);
}
static int
stge_resume(device_t dev)
{
struct stge_softc *sc;
struct ifnet *ifp;
uint8_t v;
sc = device_get_softc(dev);
STGE_LOCK(sc);
/*
* Clear WOL bits, so special frames wouldn't interfere
* normal Rx operation anymore.
*/
v = CSR_READ_1(sc, STGE_WakeEvent);
v &= ~(WE_WakePktEnable | WE_MagicPktEnable | WE_LinkEventEnable |
WE_WakeOnLanEnable);
CSR_WRITE_1(sc, STGE_WakeEvent, v);
ifp = sc->sc_ifp;
if (ifp->if_flags & IFF_UP)
stge_init_locked(sc);
sc->sc_suspended = 0;
STGE_UNLOCK(sc);
return (0);
}
static void
stge_dma_wait(struct stge_softc *sc)
{
int i;
for (i = 0; i < STGE_TIMEOUT; i++) {
DELAY(2);
if ((CSR_READ_4(sc, STGE_DMACtrl) & DMAC_TxDMAInProg) == 0)
break;
}
if (i == STGE_TIMEOUT)
device_printf(sc->sc_dev, "DMA wait timed out\n");
}
static int
stge_encap(struct stge_softc *sc, struct mbuf **m_head)
{
struct stge_txdesc *txd;
struct stge_tfd *tfd;
struct mbuf *m;
bus_dma_segment_t txsegs[STGE_MAXTXSEGS];
int error, i, nsegs, si;
uint64_t csum_flags, tfc;
STGE_LOCK_ASSERT(sc);
if ((txd = STAILQ_FIRST(&sc->sc_cdata.stge_txfreeq)) == NULL)
return (ENOBUFS);
error = bus_dmamap_load_mbuf_sg(sc->sc_cdata.stge_tx_tag,
txd->tx_dmamap, *m_head, txsegs, &nsegs, 0);
if (error == EFBIG) {
m = m_collapse(*m_head, M_NOWAIT, STGE_MAXTXSEGS);
if (m == NULL) {
m_freem(*m_head);
*m_head = NULL;
return (ENOMEM);
}
*m_head = m;
error = bus_dmamap_load_mbuf_sg(sc->sc_cdata.stge_tx_tag,
txd->tx_dmamap, *m_head, txsegs, &nsegs, 0);
if (error != 0) {
m_freem(*m_head);
*m_head = NULL;
return (error);
}
} else if (error != 0)
return (error);
if (nsegs == 0) {
m_freem(*m_head);
*m_head = NULL;
return (EIO);
}
m = *m_head;
csum_flags = 0;
if ((m->m_pkthdr.csum_flags & STGE_CSUM_FEATURES) != 0) {
if (m->m_pkthdr.csum_flags & CSUM_IP)
csum_flags |= TFD_IPChecksumEnable;
if (m->m_pkthdr.csum_flags & CSUM_TCP)
csum_flags |= TFD_TCPChecksumEnable;
else if (m->m_pkthdr.csum_flags & CSUM_UDP)
csum_flags |= TFD_UDPChecksumEnable;
}
si = sc->sc_cdata.stge_tx_prod;
tfd = &sc->sc_rdata.stge_tx_ring[si];
for (i = 0; i < nsegs; i++)
tfd->tfd_frags[i].frag_word0 =
htole64(FRAG_ADDR(txsegs[i].ds_addr) |
FRAG_LEN(txsegs[i].ds_len));
sc->sc_cdata.stge_tx_cnt++;
tfc = TFD_FrameId(si) | TFD_WordAlign(TFD_WordAlign_disable) |
TFD_FragCount(nsegs) | csum_flags;
if (sc->sc_cdata.stge_tx_cnt >= STGE_TX_HIWAT)
tfc |= TFD_TxDMAIndicate;
/* Update producer index. */
sc->sc_cdata.stge_tx_prod = (si + 1) % STGE_TX_RING_CNT;
/* Check if we have a VLAN tag to insert. */
if (m->m_flags & M_VLANTAG)
tfc |= (TFD_VLANTagInsert | TFD_VID(m->m_pkthdr.ether_vtag));
tfd->tfd_control = htole64(tfc);
/* Update Tx Queue. */
STAILQ_REMOVE_HEAD(&sc->sc_cdata.stge_txfreeq, tx_q);
STAILQ_INSERT_TAIL(&sc->sc_cdata.stge_txbusyq, txd, tx_q);
txd->tx_m = m;
/* Sync descriptors. */
bus_dmamap_sync(sc->sc_cdata.stge_tx_tag, txd->tx_dmamap,
BUS_DMASYNC_PREWRITE);
bus_dmamap_sync(sc->sc_cdata.stge_tx_ring_tag,
sc->sc_cdata.stge_tx_ring_map,
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
return (0);
}
/*
* stge_start: [ifnet interface function]
*
* Start packet transmission on the interface.
*/
static void
stge_start(struct ifnet *ifp)
{
struct stge_softc *sc;
sc = ifp->if_softc;
STGE_LOCK(sc);
stge_start_locked(ifp);
STGE_UNLOCK(sc);
}
static void
stge_start_locked(struct ifnet *ifp)
{
struct stge_softc *sc;
struct mbuf *m_head;
int enq;
sc = ifp->if_softc;
STGE_LOCK_ASSERT(sc);
if ((ifp->if_drv_flags & (IFF_DRV_RUNNING|IFF_DRV_OACTIVE)) !=
IFF_DRV_RUNNING || sc->sc_link == 0)
return;
for (enq = 0; !IFQ_DRV_IS_EMPTY(&ifp->if_snd); ) {
if (sc->sc_cdata.stge_tx_cnt >= STGE_TX_HIWAT) {
ifp->if_drv_flags |= IFF_DRV_OACTIVE;
break;
}
IFQ_DRV_DEQUEUE(&ifp->if_snd, m_head);
if (m_head == NULL)
break;
/*
* Pack the data into the transmit ring. If we
* don't have room, set the OACTIVE flag and wait
* for the NIC to drain the ring.
*/
if (stge_encap(sc, &m_head)) {
if (m_head == NULL)
break;
IFQ_DRV_PREPEND(&ifp->if_snd, m_head);
ifp->if_drv_flags |= IFF_DRV_OACTIVE;
break;
}
enq++;
/*
* If there's a BPF listener, bounce a copy of this frame
* to him.
*/
ETHER_BPF_MTAP(ifp, m_head);
}
if (enq > 0) {
/* Transmit */
CSR_WRITE_4(sc, STGE_DMACtrl, DMAC_TxDMAPollNow);
/* Set a timeout in case the chip goes out to lunch. */
sc->sc_watchdog_timer = 5;
}
}
/*
* stge_watchdog:
*
* Watchdog timer handler.
*/
static void
stge_watchdog(struct stge_softc *sc)
{
struct ifnet *ifp;
STGE_LOCK_ASSERT(sc);
if (sc->sc_watchdog_timer == 0 || --sc->sc_watchdog_timer)
return;
ifp = sc->sc_ifp;
if_printf(sc->sc_ifp, "device timeout\n");
ifp->if_oerrors++;
ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
stge_init_locked(sc);
if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
stge_start_locked(ifp);
}
/*
* stge_ioctl: [ifnet interface function]
*
* Handle control requests from the operator.
*/
static int
stge_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data)
{
struct stge_softc *sc;
struct ifreq *ifr;
struct mii_data *mii;
int error, mask;
sc = ifp->if_softc;
ifr = (struct ifreq *)data;
error = 0;
switch (cmd) {
case SIOCSIFMTU:
if (ifr->ifr_mtu < ETHERMIN || ifr->ifr_mtu > STGE_JUMBO_MTU)
error = EINVAL;
else if (ifp->if_mtu != ifr->ifr_mtu) {
ifp->if_mtu = ifr->ifr_mtu;
STGE_LOCK(sc);
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0) {
ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
stge_init_locked(sc);
}
STGE_UNLOCK(sc);
}
break;
case SIOCSIFFLAGS:
STGE_LOCK(sc);
if ((ifp->if_flags & IFF_UP) != 0) {
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0) {
if (((ifp->if_flags ^ sc->sc_if_flags)
& IFF_PROMISC) != 0)
stge_set_filter(sc);
} else {
if (sc->sc_detach == 0)
stge_init_locked(sc);
}
} else {
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0)
stge_stop(sc);
}
sc->sc_if_flags = ifp->if_flags;
STGE_UNLOCK(sc);
break;
case SIOCADDMULTI:
case SIOCDELMULTI:
STGE_LOCK(sc);
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0)
stge_set_multi(sc);
STGE_UNLOCK(sc);
break;
case SIOCSIFMEDIA:
case SIOCGIFMEDIA:
mii = device_get_softc(sc->sc_miibus);
error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, cmd);
break;
case SIOCSIFCAP:
mask = ifr->ifr_reqcap ^ ifp->if_capenable;
#ifdef DEVICE_POLLING
if ((mask & IFCAP_POLLING) != 0) {
if ((ifr->ifr_reqcap & IFCAP_POLLING) != 0) {
error = ether_poll_register(stge_poll, ifp);
if (error != 0)
break;
STGE_LOCK(sc);
CSR_WRITE_2(sc, STGE_IntEnable, 0);
ifp->if_capenable |= IFCAP_POLLING;
STGE_UNLOCK(sc);
} else {
error = ether_poll_deregister(ifp);
if (error != 0)
break;
STGE_LOCK(sc);
CSR_WRITE_2(sc, STGE_IntEnable,
sc->sc_IntEnable);
ifp->if_capenable &= ~IFCAP_POLLING;
STGE_UNLOCK(sc);
}
}
#endif
if ((mask & IFCAP_HWCSUM) != 0) {
ifp->if_capenable ^= IFCAP_HWCSUM;
if ((IFCAP_HWCSUM & ifp->if_capenable) != 0 &&
(IFCAP_HWCSUM & ifp->if_capabilities) != 0)
ifp->if_hwassist = STGE_CSUM_FEATURES;
else
ifp->if_hwassist = 0;
}
if ((mask & IFCAP_WOL) != 0 &&
(ifp->if_capabilities & IFCAP_WOL) != 0) {
if ((mask & IFCAP_WOL_MAGIC) != 0)
ifp->if_capenable ^= IFCAP_WOL_MAGIC;
}
if ((mask & IFCAP_VLAN_HWTAGGING) != 0) {
ifp->if_capenable ^= IFCAP_VLAN_HWTAGGING;
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0) {
STGE_LOCK(sc);
stge_vlan_setup(sc);
STGE_UNLOCK(sc);
}
}
VLAN_CAPABILITIES(ifp);
break;
default:
error = ether_ioctl(ifp, cmd, data);
break;
}
return (error);
}
static void
stge_link_task(void *arg, int pending)
{
struct stge_softc *sc;
struct mii_data *mii;
uint32_t v, ac;
int i;
sc = (struct stge_softc *)arg;
STGE_LOCK(sc);
mii = device_get_softc(sc->sc_miibus);
if (mii->mii_media_status & IFM_ACTIVE) {
if (IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE)
sc->sc_link = 1;
} else
sc->sc_link = 0;
sc->sc_MACCtrl = 0;
if (((mii->mii_media_active & IFM_GMASK) & IFM_FDX) != 0)
sc->sc_MACCtrl |= MC_DuplexSelect;
o Flesh out the generic IEEE 802.3 annex 31B full duplex flow control support in mii(4): - Merge generic flow control advertisement (which can be enabled by passing by MIIF_DOPAUSE to mii_attach(9)) and parsing support from NetBSD into mii_physubr.c and ukphy_subr.c. Unlike as in NetBSD, IFM_FLOW isn't implemented as a global option via the "don't care mask" but instead as a media specific option this. This has the following advantages: o allows flow control advertisement with autonegotiation to be turned on and off via ifconfig(8) with the default typically being off (though MIIF_FORCEPAUSE has been added causing flow control to be always advertised, allowing to easily MFC this changes for drivers that previously used home-grown support for flow control that behaved that way without breaking POLA) o allows to deal with PHY drivers where flow control advertisement with manual selection doesn't work or at least isn't implemented, like it's the case with brgphy(4), e1000phy(4) and ip1000phy(4), by setting MIIF_NOMANPAUSE o the available combinations of media options are readily available from the `ifconfig -m` output - Add IFM_FLOW to IFM_SHARED_OPTION_DESCRIPTIONS and IFM_ETH_RXPAUSE and IFM_ETH_TXPAUSE to IFM_SUBTYPE_ETHERNET_OPTION_DESCRIPTIONS so these are understood by ifconfig(8). o Make the master/slave support in mii(4) actually usable: - Change IFM_ETH_MASTER from being implemented as a global option via the "don't care mask" to a media specific one as it actually is only applicable to IFM_1000_T to date. - Let mii_phy_setmedia() set GTCR_MAN_MS in IFM_1000_T slave mode to actually configure manually selected slave mode (like we also do in the PHY specific implementations). - Add IFM_ETH_MASTER to IFM_SUBTYPE_ETHERNET_OPTION_DESCRIPTIONS so it is understood by ifconfig(8). o Switch bge(4), bce(4), msk(4), nfe(4) and stge(4) along with brgphy(4), e1000phy(4) and ip1000phy(4) to use the generic flow control support instead of home-grown solutions via IFM_FLAGs. This includes changing these PHY drivers and smcphy(4) to no longer unconditionally advertise support for flow control but only if the selected media has IFM_FLOW set (or MIIF_FORCEPAUSE is set) and implemented for these media variants, i.e. typically only for copper. o Switch brgphy(4), ciphy(4), e1000phy(4) and ip1000phy(4) to report and set IFM_1000_T master mode via IFM_ETH_MASTER instead of via IFF_LINK0 and some IFM_FLAGn. o Switch brgphy(4) to add at least the the supported copper media based on the contents of the BMSR via mii_phy_add_media() instead of hardcoding them. The latter approach seems to have developed historically, besides causing unnecessary code duplication it was also undesirable because brgphy_mii_phy_auto() already based the capability advertisement on the contents of the BMSR though. o Let brgphy(4) set IFM_1000_T master mode on all supported PHY and not just BCM5701. Apparently this was a misinterpretation of a workaround in the Linux tg3 driver; BCM5701 seem to require RGPHY_1000CTL_MSE and BRGPHY_1000CTL_MSC to be set when configuring autonegotiation but this doesn't mean we can't set these as well on other PHYs for manual media selection. o Let ukphy_status() report IFM_1000_T master mode via IFM_ETH_MASTER so IFM_1000_T master mode support now is generally available with all PHY drivers. o Don't let e1000phy(4) set master/slave bits for IFM_1000_SX as it's not applicable there. Reviewed by: yongari (plus additional testing) Obtained from: NetBSD (partially), OpenBSD (partially) MFC after: 2 weeks
2010-11-14 13:26:10 +00:00
if (((mii->mii_media_active & IFM_GMASK) & IFM_ETH_RXPAUSE) != 0)
sc->sc_MACCtrl |= MC_RxFlowControlEnable;
o Flesh out the generic IEEE 802.3 annex 31B full duplex flow control support in mii(4): - Merge generic flow control advertisement (which can be enabled by passing by MIIF_DOPAUSE to mii_attach(9)) and parsing support from NetBSD into mii_physubr.c and ukphy_subr.c. Unlike as in NetBSD, IFM_FLOW isn't implemented as a global option via the "don't care mask" but instead as a media specific option this. This has the following advantages: o allows flow control advertisement with autonegotiation to be turned on and off via ifconfig(8) with the default typically being off (though MIIF_FORCEPAUSE has been added causing flow control to be always advertised, allowing to easily MFC this changes for drivers that previously used home-grown support for flow control that behaved that way without breaking POLA) o allows to deal with PHY drivers where flow control advertisement with manual selection doesn't work or at least isn't implemented, like it's the case with brgphy(4), e1000phy(4) and ip1000phy(4), by setting MIIF_NOMANPAUSE o the available combinations of media options are readily available from the `ifconfig -m` output - Add IFM_FLOW to IFM_SHARED_OPTION_DESCRIPTIONS and IFM_ETH_RXPAUSE and IFM_ETH_TXPAUSE to IFM_SUBTYPE_ETHERNET_OPTION_DESCRIPTIONS so these are understood by ifconfig(8). o Make the master/slave support in mii(4) actually usable: - Change IFM_ETH_MASTER from being implemented as a global option via the "don't care mask" to a media specific one as it actually is only applicable to IFM_1000_T to date. - Let mii_phy_setmedia() set GTCR_MAN_MS in IFM_1000_T slave mode to actually configure manually selected slave mode (like we also do in the PHY specific implementations). - Add IFM_ETH_MASTER to IFM_SUBTYPE_ETHERNET_OPTION_DESCRIPTIONS so it is understood by ifconfig(8). o Switch bge(4), bce(4), msk(4), nfe(4) and stge(4) along with brgphy(4), e1000phy(4) and ip1000phy(4) to use the generic flow control support instead of home-grown solutions via IFM_FLAGs. This includes changing these PHY drivers and smcphy(4) to no longer unconditionally advertise support for flow control but only if the selected media has IFM_FLOW set (or MIIF_FORCEPAUSE is set) and implemented for these media variants, i.e. typically only for copper. o Switch brgphy(4), ciphy(4), e1000phy(4) and ip1000phy(4) to report and set IFM_1000_T master mode via IFM_ETH_MASTER instead of via IFF_LINK0 and some IFM_FLAGn. o Switch brgphy(4) to add at least the the supported copper media based on the contents of the BMSR via mii_phy_add_media() instead of hardcoding them. The latter approach seems to have developed historically, besides causing unnecessary code duplication it was also undesirable because brgphy_mii_phy_auto() already based the capability advertisement on the contents of the BMSR though. o Let brgphy(4) set IFM_1000_T master mode on all supported PHY and not just BCM5701. Apparently this was a misinterpretation of a workaround in the Linux tg3 driver; BCM5701 seem to require RGPHY_1000CTL_MSE and BRGPHY_1000CTL_MSC to be set when configuring autonegotiation but this doesn't mean we can't set these as well on other PHYs for manual media selection. o Let ukphy_status() report IFM_1000_T master mode via IFM_ETH_MASTER so IFM_1000_T master mode support now is generally available with all PHY drivers. o Don't let e1000phy(4) set master/slave bits for IFM_1000_SX as it's not applicable there. Reviewed by: yongari (plus additional testing) Obtained from: NetBSD (partially), OpenBSD (partially) MFC after: 2 weeks
2010-11-14 13:26:10 +00:00
if (((mii->mii_media_active & IFM_GMASK) & IFM_ETH_TXPAUSE) != 0)
sc->sc_MACCtrl |= MC_TxFlowControlEnable;
/*
* Update STGE_MACCtrl register depending on link status.
* (duplex, flow control etc)
*/
v = ac = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK;
v &= ~(MC_DuplexSelect|MC_RxFlowControlEnable|MC_TxFlowControlEnable);
v |= sc->sc_MACCtrl;
CSR_WRITE_4(sc, STGE_MACCtrl, v);
if (((ac ^ sc->sc_MACCtrl) & MC_DuplexSelect) != 0) {
/* Duplex setting changed, reset Tx/Rx functions. */
ac = CSR_READ_4(sc, STGE_AsicCtrl);
ac |= AC_TxReset | AC_RxReset;
CSR_WRITE_4(sc, STGE_AsicCtrl, ac);
for (i = 0; i < STGE_TIMEOUT; i++) {
DELAY(100);
if ((CSR_READ_4(sc, STGE_AsicCtrl) & AC_ResetBusy) == 0)
break;
}
if (i == STGE_TIMEOUT)
device_printf(sc->sc_dev, "reset failed to complete\n");
}
STGE_UNLOCK(sc);
}
static __inline int
stge_tx_error(struct stge_softc *sc)
{
uint32_t txstat;
int error;
for (error = 0;;) {
txstat = CSR_READ_4(sc, STGE_TxStatus);
if ((txstat & TS_TxComplete) == 0)
break;
/* Tx underrun */
if ((txstat & TS_TxUnderrun) != 0) {
/*
* XXX
* There should be a more better way to recover
* from Tx underrun instead of a full reset.
*/
if (sc->sc_nerr++ < STGE_MAXERR)
device_printf(sc->sc_dev, "Tx underrun, "
"resetting...\n");
if (sc->sc_nerr == STGE_MAXERR)
device_printf(sc->sc_dev, "too many errors; "
"not reporting any more\n");
error = -1;
break;
}
/* Maximum/Late collisions, Re-enable Tx MAC. */
if ((txstat & (TS_MaxCollisions|TS_LateCollision)) != 0)
CSR_WRITE_4(sc, STGE_MACCtrl,
(CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK) |
MC_TxEnable);
}
return (error);
}
/*
* stge_intr:
*
* Interrupt service routine.
*/
static void
stge_intr(void *arg)
{
struct stge_softc *sc;
struct ifnet *ifp;
int reinit;
uint16_t status;
sc = (struct stge_softc *)arg;
ifp = sc->sc_ifp;
STGE_LOCK(sc);
#ifdef DEVICE_POLLING
if ((ifp->if_capenable & IFCAP_POLLING) != 0)
goto done_locked;
#endif
status = CSR_READ_2(sc, STGE_IntStatus);
if (sc->sc_suspended || (status & IS_InterruptStatus) == 0)
goto done_locked;
/* Disable interrupts. */
for (reinit = 0;;) {
status = CSR_READ_2(sc, STGE_IntStatusAck);
status &= sc->sc_IntEnable;
if (status == 0)
break;
/* Host interface errors. */
if ((status & IS_HostError) != 0) {
device_printf(sc->sc_dev,
"Host interface error, resetting...\n");
reinit = 1;
goto force_init;
}
/* Receive interrupts. */
if ((status & IS_RxDMAComplete) != 0) {
stge_rxeof(sc);
if ((status & IS_RFDListEnd) != 0)
CSR_WRITE_4(sc, STGE_DMACtrl,
DMAC_RxDMAPollNow);
}
/* Transmit interrupts. */
if ((status & (IS_TxDMAComplete | IS_TxComplete)) != 0)
stge_txeof(sc);
/* Transmission errors.*/
if ((status & IS_TxComplete) != 0) {
if ((reinit = stge_tx_error(sc)) != 0)
break;
}
}
force_init:
if (reinit != 0) {
ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
stge_init_locked(sc);
}
/* Re-enable interrupts. */
CSR_WRITE_2(sc, STGE_IntEnable, sc->sc_IntEnable);
/* Try to get more packets going. */
if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
stge_start_locked(ifp);
done_locked:
STGE_UNLOCK(sc);
}
/*
* stge_txeof:
*
* Helper; handle transmit interrupts.
*/
static void
stge_txeof(struct stge_softc *sc)
{
struct ifnet *ifp;
struct stge_txdesc *txd;
uint64_t control;
int cons;
STGE_LOCK_ASSERT(sc);
ifp = sc->sc_ifp;
txd = STAILQ_FIRST(&sc->sc_cdata.stge_txbusyq);
if (txd == NULL)
return;
bus_dmamap_sync(sc->sc_cdata.stge_tx_ring_tag,
sc->sc_cdata.stge_tx_ring_map, BUS_DMASYNC_POSTREAD);
/*
* Go through our Tx list and free mbufs for those
* frames which have been transmitted.
*/
for (cons = sc->sc_cdata.stge_tx_cons;;
cons = (cons + 1) % STGE_TX_RING_CNT) {
if (sc->sc_cdata.stge_tx_cnt <= 0)
break;
control = le64toh(sc->sc_rdata.stge_tx_ring[cons].tfd_control);
if ((control & TFD_TFDDone) == 0)
break;
sc->sc_cdata.stge_tx_cnt--;
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
bus_dmamap_sync(sc->sc_cdata.stge_tx_tag, txd->tx_dmamap,
BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(sc->sc_cdata.stge_tx_tag, txd->tx_dmamap);
/* Output counter is updated with statistics register */
m_freem(txd->tx_m);
txd->tx_m = NULL;
STAILQ_REMOVE_HEAD(&sc->sc_cdata.stge_txbusyq, tx_q);
STAILQ_INSERT_TAIL(&sc->sc_cdata.stge_txfreeq, txd, tx_q);
txd = STAILQ_FIRST(&sc->sc_cdata.stge_txbusyq);
}
sc->sc_cdata.stge_tx_cons = cons;
if (sc->sc_cdata.stge_tx_cnt == 0)
sc->sc_watchdog_timer = 0;
bus_dmamap_sync(sc->sc_cdata.stge_tx_ring_tag,
sc->sc_cdata.stge_tx_ring_map,
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
}
static __inline void
stge_discard_rxbuf(struct stge_softc *sc, int idx)
{
struct stge_rfd *rfd;
rfd = &sc->sc_rdata.stge_rx_ring[idx];
rfd->rfd_status = 0;
}
#ifndef __NO_STRICT_ALIGNMENT
/*
* It seems that TC9021's DMA engine has alignment restrictions in
* DMA scatter operations. The first DMA segment has no address
* alignment restrictins but the rest should be aligned on 4(?) bytes
* boundary. Otherwise it would corrupt random memory. Since we don't
* know which one is used for the first segment in advance we simply
* don't align at all.
* To avoid copying over an entire frame to align, we allocate a new
* mbuf and copy ethernet header to the new mbuf. The new mbuf is
* prepended into the existing mbuf chain.
*/
static __inline struct mbuf *
stge_fixup_rx(struct stge_softc *sc, struct mbuf *m)
{
struct mbuf *n;
n = NULL;
if (m->m_len <= (MCLBYTES - ETHER_HDR_LEN)) {
bcopy(m->m_data, m->m_data + ETHER_HDR_LEN, m->m_len);
m->m_data += ETHER_HDR_LEN;
n = m;
} else {
MGETHDR(n, M_NOWAIT, MT_DATA);
if (n != NULL) {
bcopy(m->m_data, n->m_data, ETHER_HDR_LEN);
m->m_data += ETHER_HDR_LEN;
m->m_len -= ETHER_HDR_LEN;
n->m_len = ETHER_HDR_LEN;
M_MOVE_PKTHDR(n, m);
n->m_next = m;
} else
m_freem(m);
}
return (n);
}
#endif
/*
* stge_rxeof:
*
* Helper; handle receive interrupts.
*/
static int
stge_rxeof(struct stge_softc *sc)
{
struct ifnet *ifp;
struct stge_rxdesc *rxd;
struct mbuf *mp, *m;
uint64_t status64;
uint32_t status;
int cons, prog, rx_npkts;
STGE_LOCK_ASSERT(sc);
rx_npkts = 0;
ifp = sc->sc_ifp;
bus_dmamap_sync(sc->sc_cdata.stge_rx_ring_tag,
sc->sc_cdata.stge_rx_ring_map, BUS_DMASYNC_POSTREAD);
prog = 0;
for (cons = sc->sc_cdata.stge_rx_cons; prog < STGE_RX_RING_CNT;
prog++, cons = (cons + 1) % STGE_RX_RING_CNT) {
status64 = le64toh(sc->sc_rdata.stge_rx_ring[cons].rfd_status);
status = RFD_RxStatus(status64);
if ((status & RFD_RFDDone) == 0)
break;
#ifdef DEVICE_POLLING
if (ifp->if_capenable & IFCAP_POLLING) {
if (sc->sc_cdata.stge_rxcycles <= 0)
break;
sc->sc_cdata.stge_rxcycles--;
}
#endif
prog++;
rxd = &sc->sc_cdata.stge_rxdesc[cons];
mp = rxd->rx_m;
/*
* If the packet had an error, drop it. Note we count
* the error later in the periodic stats update.
*/
if ((status & RFD_FrameEnd) != 0 && (status &
(RFD_RxFIFOOverrun | RFD_RxRuntFrame |
RFD_RxAlignmentError | RFD_RxFCSError |
RFD_RxLengthError)) != 0) {
stge_discard_rxbuf(sc, cons);
if (sc->sc_cdata.stge_rxhead != NULL) {
m_freem(sc->sc_cdata.stge_rxhead);
STGE_RXCHAIN_RESET(sc);
}
continue;
}
/*
* Add a new receive buffer to the ring.
*/
if (stge_newbuf(sc, cons) != 0) {
ifp->if_iqdrops++;
stge_discard_rxbuf(sc, cons);
if (sc->sc_cdata.stge_rxhead != NULL) {
m_freem(sc->sc_cdata.stge_rxhead);
STGE_RXCHAIN_RESET(sc);
}
continue;
}
if ((status & RFD_FrameEnd) != 0)
mp->m_len = RFD_RxDMAFrameLen(status) -
sc->sc_cdata.stge_rxlen;
sc->sc_cdata.stge_rxlen += mp->m_len;
/* Chain mbufs. */
if (sc->sc_cdata.stge_rxhead == NULL) {
sc->sc_cdata.stge_rxhead = mp;
sc->sc_cdata.stge_rxtail = mp;
} else {
mp->m_flags &= ~M_PKTHDR;
sc->sc_cdata.stge_rxtail->m_next = mp;
sc->sc_cdata.stge_rxtail = mp;
}
if ((status & RFD_FrameEnd) != 0) {
m = sc->sc_cdata.stge_rxhead;
m->m_pkthdr.rcvif = ifp;
m->m_pkthdr.len = sc->sc_cdata.stge_rxlen;
if (m->m_pkthdr.len > sc->sc_if_framesize) {
m_freem(m);
STGE_RXCHAIN_RESET(sc);
continue;
}
/*
* Set the incoming checksum information for
* the packet.
*/
if ((ifp->if_capenable & IFCAP_RXCSUM) != 0) {
if ((status & RFD_IPDetected) != 0) {
m->m_pkthdr.csum_flags |=
CSUM_IP_CHECKED;
if ((status & RFD_IPError) == 0)
m->m_pkthdr.csum_flags |=
CSUM_IP_VALID;
}
if (((status & RFD_TCPDetected) != 0 &&
(status & RFD_TCPError) == 0) ||
((status & RFD_UDPDetected) != 0 &&
(status & RFD_UDPError) == 0)) {
m->m_pkthdr.csum_flags |=
(CSUM_DATA_VALID | CSUM_PSEUDO_HDR);
m->m_pkthdr.csum_data = 0xffff;
}
}
#ifndef __NO_STRICT_ALIGNMENT
if (sc->sc_if_framesize > (MCLBYTES - ETHER_ALIGN)) {
if ((m = stge_fixup_rx(sc, m)) == NULL) {
STGE_RXCHAIN_RESET(sc);
continue;
}
}
#endif
/* Check for VLAN tagged packets. */
if ((status & RFD_VLANDetected) != 0 &&
(ifp->if_capenable & IFCAP_VLAN_HWTAGGING) != 0) {
m->m_pkthdr.ether_vtag = RFD_TCI(status64);
m->m_flags |= M_VLANTAG;
}
STGE_UNLOCK(sc);
/* Pass it on. */
(*ifp->if_input)(ifp, m);
STGE_LOCK(sc);
rx_npkts++;
STGE_RXCHAIN_RESET(sc);
}
}
if (prog > 0) {
/* Update the consumer index. */
sc->sc_cdata.stge_rx_cons = cons;
bus_dmamap_sync(sc->sc_cdata.stge_rx_ring_tag,
sc->sc_cdata.stge_rx_ring_map,
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
}
return (rx_npkts);
}
#ifdef DEVICE_POLLING
static int
stge_poll(struct ifnet *ifp, enum poll_cmd cmd, int count)
{
struct stge_softc *sc;
uint16_t status;
int rx_npkts;
rx_npkts = 0;
sc = ifp->if_softc;
STGE_LOCK(sc);
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) {
STGE_UNLOCK(sc);
return (rx_npkts);
}
sc->sc_cdata.stge_rxcycles = count;
rx_npkts = stge_rxeof(sc);
stge_txeof(sc);
if (cmd == POLL_AND_CHECK_STATUS) {
status = CSR_READ_2(sc, STGE_IntStatus);
status &= sc->sc_IntEnable;
if (status != 0) {
if ((status & IS_HostError) != 0) {
device_printf(sc->sc_dev,
"Host interface error, resetting...\n");
ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
stge_init_locked(sc);
}
if ((status & IS_TxComplete) != 0) {
if (stge_tx_error(sc) != 0) {
ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
stge_init_locked(sc);
}
}
}
}
if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
stge_start_locked(ifp);
STGE_UNLOCK(sc);
return (rx_npkts);
}
#endif /* DEVICE_POLLING */
/*
* stge_tick:
*
* One second timer, used to tick the MII.
*/
static void
stge_tick(void *arg)
{
struct stge_softc *sc;
struct mii_data *mii;
sc = (struct stge_softc *)arg;
STGE_LOCK_ASSERT(sc);
mii = device_get_softc(sc->sc_miibus);
mii_tick(mii);
/* Update statistics counters. */
stge_stats_update(sc);
/*
* Relcaim any pending Tx descriptors to release mbufs in a
* timely manner as we don't generate Tx completion interrupts
* for every frame. This limits the delay to a maximum of one
* second.
*/
if (sc->sc_cdata.stge_tx_cnt != 0)
stge_txeof(sc);
stge_watchdog(sc);
callout_reset(&sc->sc_tick_ch, hz, stge_tick, sc);
}
/*
* stge_stats_update:
*
* Read the TC9021 statistics counters.
*/
static void
stge_stats_update(struct stge_softc *sc)
{
struct ifnet *ifp;
STGE_LOCK_ASSERT(sc);
ifp = sc->sc_ifp;
CSR_READ_4(sc,STGE_OctetRcvOk);
ifp->if_ipackets += CSR_READ_4(sc, STGE_FramesRcvdOk);
ifp->if_ierrors += CSR_READ_2(sc, STGE_FramesLostRxErrors);
CSR_READ_4(sc, STGE_OctetXmtdOk);
ifp->if_opackets += CSR_READ_4(sc, STGE_FramesXmtdOk);
ifp->if_collisions +=
CSR_READ_4(sc, STGE_LateCollisions) +
CSR_READ_4(sc, STGE_MultiColFrames) +
CSR_READ_4(sc, STGE_SingleColFrames);
ifp->if_oerrors +=
CSR_READ_2(sc, STGE_FramesAbortXSColls) +
CSR_READ_2(sc, STGE_FramesWEXDeferal);
}
/*
* stge_reset:
*
* Perform a soft reset on the TC9021.
*/
static void
stge_reset(struct stge_softc *sc, uint32_t how)
{
uint32_t ac;
uint8_t v;
int i, dv;
STGE_LOCK_ASSERT(sc);
dv = 5000;
ac = CSR_READ_4(sc, STGE_AsicCtrl);
switch (how) {
case STGE_RESET_TX:
ac |= AC_TxReset | AC_FIFO;
dv = 100;
break;
case STGE_RESET_RX:
ac |= AC_RxReset | AC_FIFO;
dv = 100;
break;
case STGE_RESET_FULL:
default:
/*
* Only assert RstOut if we're fiber. We need GMII clocks
* to be present in order for the reset to complete on fiber
* cards.
*/
ac |= AC_GlobalReset | AC_RxReset | AC_TxReset |
AC_DMA | AC_FIFO | AC_Network | AC_Host | AC_AutoInit |
(sc->sc_usefiber ? AC_RstOut : 0);
break;
}
CSR_WRITE_4(sc, STGE_AsicCtrl, ac);
/* Account for reset problem at 10Mbps. */
DELAY(dv);
for (i = 0; i < STGE_TIMEOUT; i++) {
if ((CSR_READ_4(sc, STGE_AsicCtrl) & AC_ResetBusy) == 0)
break;
DELAY(dv);
}
if (i == STGE_TIMEOUT)
device_printf(sc->sc_dev, "reset failed to complete\n");
/* Set LED, from Linux IPG driver. */
ac = CSR_READ_4(sc, STGE_AsicCtrl);
ac &= ~(AC_LEDMode | AC_LEDSpeed | AC_LEDModeBit1);
if ((sc->sc_led & 0x01) != 0)
ac |= AC_LEDMode;
if ((sc->sc_led & 0x03) != 0)
ac |= AC_LEDModeBit1;
if ((sc->sc_led & 0x08) != 0)
ac |= AC_LEDSpeed;
CSR_WRITE_4(sc, STGE_AsicCtrl, ac);
/* Set PHY, from Linux IPG driver */
v = CSR_READ_1(sc, STGE_PhySet);
v &= ~(PS_MemLenb9b | PS_MemLen | PS_NonCompdet);
v |= ((sc->sc_led & 0x70) >> 4);
CSR_WRITE_1(sc, STGE_PhySet, v);
}
/*
* stge_init: [ ifnet interface function ]
*
* Initialize the interface.
*/
static void
stge_init(void *xsc)
{
struct stge_softc *sc;
sc = (struct stge_softc *)xsc;
STGE_LOCK(sc);
stge_init_locked(sc);
STGE_UNLOCK(sc);
}
static void
stge_init_locked(struct stge_softc *sc)
{
struct ifnet *ifp;
struct mii_data *mii;
uint16_t eaddr[3];
uint32_t v;
int error;
STGE_LOCK_ASSERT(sc);
ifp = sc->sc_ifp;
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0)
return;
mii = device_get_softc(sc->sc_miibus);
/*
* Cancel any pending I/O.
*/
stge_stop(sc);
/*
* Reset the chip to a known state.
*/
stge_reset(sc, STGE_RESET_FULL);
/* Init descriptors. */
error = stge_init_rx_ring(sc);
if (error != 0) {
device_printf(sc->sc_dev,
"initialization failed: no memory for rx buffers\n");
stge_stop(sc);
goto out;
}
stge_init_tx_ring(sc);
/* Set the station address. */
bcopy(IF_LLADDR(ifp), eaddr, ETHER_ADDR_LEN);
CSR_WRITE_2(sc, STGE_StationAddress0, htole16(eaddr[0]));
CSR_WRITE_2(sc, STGE_StationAddress1, htole16(eaddr[1]));
CSR_WRITE_2(sc, STGE_StationAddress2, htole16(eaddr[2]));
/*
* Set the statistics masks. Disable all the RMON stats,
* and disable selected stats in the non-RMON stats registers.
*/
CSR_WRITE_4(sc, STGE_RMONStatisticsMask, 0xffffffff);
CSR_WRITE_4(sc, STGE_StatisticsMask,
(1U << 1) | (1U << 2) | (1U << 3) | (1U << 4) | (1U << 5) |
(1U << 6) | (1U << 7) | (1U << 8) | (1U << 9) | (1U << 10) |
(1U << 13) | (1U << 14) | (1U << 15) | (1U << 19) | (1U << 20) |
(1U << 21));
/* Set up the receive filter. */
stge_set_filter(sc);
/* Program multicast filter. */
stge_set_multi(sc);
/*
* Give the transmit and receive ring to the chip.
*/
CSR_WRITE_4(sc, STGE_TFDListPtrHi,
STGE_ADDR_HI(STGE_TX_RING_ADDR(sc, 0)));
CSR_WRITE_4(sc, STGE_TFDListPtrLo,
STGE_ADDR_LO(STGE_TX_RING_ADDR(sc, 0)));
CSR_WRITE_4(sc, STGE_RFDListPtrHi,
STGE_ADDR_HI(STGE_RX_RING_ADDR(sc, 0)));
CSR_WRITE_4(sc, STGE_RFDListPtrLo,
STGE_ADDR_LO(STGE_RX_RING_ADDR(sc, 0)));
/*
* Initialize the Tx auto-poll period. It's OK to make this number
* large (255 is the max, but we use 127) -- we explicitly kick the
* transmit engine when there's actually a packet.
*/
CSR_WRITE_1(sc, STGE_TxDMAPollPeriod, 127);
/* ..and the Rx auto-poll period. */
CSR_WRITE_1(sc, STGE_RxDMAPollPeriod, 1);
/* Initialize the Tx start threshold. */
CSR_WRITE_2(sc, STGE_TxStartThresh, sc->sc_txthresh);
/* Rx DMA thresholds, from Linux */
CSR_WRITE_1(sc, STGE_RxDMABurstThresh, 0x30);
CSR_WRITE_1(sc, STGE_RxDMAUrgentThresh, 0x30);
/* Rx early threhold, from Linux */
CSR_WRITE_2(sc, STGE_RxEarlyThresh, 0x7ff);
/* Tx DMA thresholds, from Linux */
CSR_WRITE_1(sc, STGE_TxDMABurstThresh, 0x30);
CSR_WRITE_1(sc, STGE_TxDMAUrgentThresh, 0x04);
/*
* Initialize the Rx DMA interrupt control register. We
* request an interrupt after every incoming packet, but
* defer it for sc_rxint_dmawait us. When the number of
* interrupts pending reaches STGE_RXINT_NFRAME, we stop
* deferring the interrupt, and signal it immediately.
*/
CSR_WRITE_4(sc, STGE_RxDMAIntCtrl,
RDIC_RxFrameCount(sc->sc_rxint_nframe) |
RDIC_RxDMAWaitTime(STGE_RXINT_USECS2TICK(sc->sc_rxint_dmawait)));
/*
* Initialize the interrupt mask.
*/
sc->sc_IntEnable = IS_HostError | IS_TxComplete |
IS_TxDMAComplete | IS_RxDMAComplete | IS_RFDListEnd;
#ifdef DEVICE_POLLING
/* Disable interrupts if we are polling. */
if ((ifp->if_capenable & IFCAP_POLLING) != 0)
CSR_WRITE_2(sc, STGE_IntEnable, 0);
else
#endif
CSR_WRITE_2(sc, STGE_IntEnable, sc->sc_IntEnable);
/*
* Configure the DMA engine.
* XXX Should auto-tune TxBurstLimit.
*/
CSR_WRITE_4(sc, STGE_DMACtrl, sc->sc_DMACtrl | DMAC_TxBurstLimit(3));
/*
* Send a PAUSE frame when we reach 29,696 bytes in the Rx
* FIFO, and send an un-PAUSE frame when we reach 3056 bytes
* in the Rx FIFO.
*/
CSR_WRITE_2(sc, STGE_FlowOnTresh, 29696 / 16);
CSR_WRITE_2(sc, STGE_FlowOffThresh, 3056 / 16);
/*
* Set the maximum frame size.
*/
sc->sc_if_framesize = ifp->if_mtu + ETHER_HDR_LEN + ETHER_CRC_LEN;
CSR_WRITE_2(sc, STGE_MaxFrameSize, sc->sc_if_framesize);
/*
* Initialize MacCtrl -- do it before setting the media,
* as setting the media will actually program the register.
*
* Note: We have to poke the IFS value before poking
* anything else.
*/
/* Tx/Rx MAC should be disabled before programming IFS.*/
CSR_WRITE_4(sc, STGE_MACCtrl, MC_IFSSelect(MC_IFS96bit));
stge_vlan_setup(sc);
if (sc->sc_rev >= 6) { /* >= B.2 */
/* Multi-frag frame bug work-around. */
CSR_WRITE_2(sc, STGE_DebugCtrl,
CSR_READ_2(sc, STGE_DebugCtrl) | 0x0200);
/* Tx Poll Now bug work-around. */
CSR_WRITE_2(sc, STGE_DebugCtrl,
CSR_READ_2(sc, STGE_DebugCtrl) | 0x0010);
/* Tx Poll Now bug work-around. */
CSR_WRITE_2(sc, STGE_DebugCtrl,
CSR_READ_2(sc, STGE_DebugCtrl) | 0x0020);
}
v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK;
v |= MC_StatisticsEnable | MC_TxEnable | MC_RxEnable;
CSR_WRITE_4(sc, STGE_MACCtrl, v);
/*
* It seems that transmitting frames without checking the state of
* Rx/Tx MAC wedge the hardware.
*/
stge_start_tx(sc);
stge_start_rx(sc);
sc->sc_link = 0;
/*
* Set the current media.
*/
mii_mediachg(mii);
/*
* Start the one second MII clock.
*/
callout_reset(&sc->sc_tick_ch, hz, stge_tick, sc);
/*
* ...all done!
*/
ifp->if_drv_flags |= IFF_DRV_RUNNING;
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
out:
if (error != 0)
device_printf(sc->sc_dev, "interface not running\n");
}
static void
stge_vlan_setup(struct stge_softc *sc)
{
struct ifnet *ifp;
uint32_t v;
ifp = sc->sc_ifp;
/*
* The NIC always copy a VLAN tag regardless of STGE_MACCtrl
* MC_AutoVLANuntagging bit.
* MC_AutoVLANtagging bit selects which VLAN source to use
* between STGE_VLANTag and TFC. However TFC TFD_VLANTagInsert
* bit has priority over MC_AutoVLANtagging bit. So we always
* use TFC instead of STGE_VLANTag register.
*/
v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK;
if ((ifp->if_capenable & IFCAP_VLAN_HWTAGGING) != 0)
v |= MC_AutoVLANuntagging;
else
v &= ~MC_AutoVLANuntagging;
CSR_WRITE_4(sc, STGE_MACCtrl, v);
}
/*
* Stop transmission on the interface.
*/
static void
stge_stop(struct stge_softc *sc)
{
struct ifnet *ifp;
struct stge_txdesc *txd;
struct stge_rxdesc *rxd;
uint32_t v;
int i;
STGE_LOCK_ASSERT(sc);
/*
* Stop the one second clock.
*/
callout_stop(&sc->sc_tick_ch);
sc->sc_watchdog_timer = 0;
/*
* Disable interrupts.
*/
CSR_WRITE_2(sc, STGE_IntEnable, 0);
/*
* Stop receiver, transmitter, and stats update.
*/
stge_stop_rx(sc);
stge_stop_tx(sc);
v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK;
v |= MC_StatisticsDisable;
CSR_WRITE_4(sc, STGE_MACCtrl, v);
/*
* Stop the transmit and receive DMA.
*/
stge_dma_wait(sc);
CSR_WRITE_4(sc, STGE_TFDListPtrHi, 0);
CSR_WRITE_4(sc, STGE_TFDListPtrLo, 0);
CSR_WRITE_4(sc, STGE_RFDListPtrHi, 0);
CSR_WRITE_4(sc, STGE_RFDListPtrLo, 0);
/*
* Free RX and TX mbufs still in the queues.
*/
for (i = 0; i < STGE_RX_RING_CNT; i++) {
rxd = &sc->sc_cdata.stge_rxdesc[i];
if (rxd->rx_m != NULL) {
bus_dmamap_sync(sc->sc_cdata.stge_rx_tag,
rxd->rx_dmamap, BUS_DMASYNC_POSTREAD);
bus_dmamap_unload(sc->sc_cdata.stge_rx_tag,
rxd->rx_dmamap);
m_freem(rxd->rx_m);
rxd->rx_m = NULL;
}
}
for (i = 0; i < STGE_TX_RING_CNT; i++) {
txd = &sc->sc_cdata.stge_txdesc[i];
if (txd->tx_m != NULL) {
bus_dmamap_sync(sc->sc_cdata.stge_tx_tag,
txd->tx_dmamap, BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(sc->sc_cdata.stge_tx_tag,
txd->tx_dmamap);
m_freem(txd->tx_m);
txd->tx_m = NULL;
}
}
/*
* Mark the interface down and cancel the watchdog timer.
*/
ifp = sc->sc_ifp;
ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE);
sc->sc_link = 0;
}
static void
stge_start_tx(struct stge_softc *sc)
{
uint32_t v;
int i;
v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK;
if ((v & MC_TxEnabled) != 0)
return;
v |= MC_TxEnable;
CSR_WRITE_4(sc, STGE_MACCtrl, v);
CSR_WRITE_1(sc, STGE_TxDMAPollPeriod, 127);
for (i = STGE_TIMEOUT; i > 0; i--) {
DELAY(10);
v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK;
if ((v & MC_TxEnabled) != 0)
break;
}
if (i == 0)
device_printf(sc->sc_dev, "Starting Tx MAC timed out\n");
}
static void
stge_start_rx(struct stge_softc *sc)
{
uint32_t v;
int i;
v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK;
if ((v & MC_RxEnabled) != 0)
return;
v |= MC_RxEnable;
CSR_WRITE_4(sc, STGE_MACCtrl, v);
CSR_WRITE_1(sc, STGE_RxDMAPollPeriod, 1);
for (i = STGE_TIMEOUT; i > 0; i--) {
DELAY(10);
v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK;
if ((v & MC_RxEnabled) != 0)
break;
}
if (i == 0)
device_printf(sc->sc_dev, "Starting Rx MAC timed out\n");
}
static void
stge_stop_tx(struct stge_softc *sc)
{
uint32_t v;
int i;
v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK;
if ((v & MC_TxEnabled) == 0)
return;
v |= MC_TxDisable;
CSR_WRITE_4(sc, STGE_MACCtrl, v);
for (i = STGE_TIMEOUT; i > 0; i--) {
DELAY(10);
v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK;
if ((v & MC_TxEnabled) == 0)
break;
}
if (i == 0)
device_printf(sc->sc_dev, "Stopping Tx MAC timed out\n");
}
static void
stge_stop_rx(struct stge_softc *sc)
{
uint32_t v;
int i;
v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK;
if ((v & MC_RxEnabled) == 0)
return;
v |= MC_RxDisable;
CSR_WRITE_4(sc, STGE_MACCtrl, v);
for (i = STGE_TIMEOUT; i > 0; i--) {
DELAY(10);
v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK;
if ((v & MC_RxEnabled) == 0)
break;
}
if (i == 0)
device_printf(sc->sc_dev, "Stopping Rx MAC timed out\n");
}
static void
stge_init_tx_ring(struct stge_softc *sc)
{
struct stge_ring_data *rd;
struct stge_txdesc *txd;
bus_addr_t addr;
int i;
STAILQ_INIT(&sc->sc_cdata.stge_txfreeq);
STAILQ_INIT(&sc->sc_cdata.stge_txbusyq);
sc->sc_cdata.stge_tx_prod = 0;
sc->sc_cdata.stge_tx_cons = 0;
sc->sc_cdata.stge_tx_cnt = 0;
rd = &sc->sc_rdata;
bzero(rd->stge_tx_ring, STGE_TX_RING_SZ);
for (i = 0; i < STGE_TX_RING_CNT; i++) {
if (i == (STGE_TX_RING_CNT - 1))
addr = STGE_TX_RING_ADDR(sc, 0);
else
addr = STGE_TX_RING_ADDR(sc, i + 1);
rd->stge_tx_ring[i].tfd_next = htole64(addr);
rd->stge_tx_ring[i].tfd_control = htole64(TFD_TFDDone);
txd = &sc->sc_cdata.stge_txdesc[i];
STAILQ_INSERT_TAIL(&sc->sc_cdata.stge_txfreeq, txd, tx_q);
}
bus_dmamap_sync(sc->sc_cdata.stge_tx_ring_tag,
sc->sc_cdata.stge_tx_ring_map,
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
}
static int
stge_init_rx_ring(struct stge_softc *sc)
{
struct stge_ring_data *rd;
bus_addr_t addr;
int i;
sc->sc_cdata.stge_rx_cons = 0;
STGE_RXCHAIN_RESET(sc);
rd = &sc->sc_rdata;
bzero(rd->stge_rx_ring, STGE_RX_RING_SZ);
for (i = 0; i < STGE_RX_RING_CNT; i++) {
if (stge_newbuf(sc, i) != 0)
return (ENOBUFS);
if (i == (STGE_RX_RING_CNT - 1))
addr = STGE_RX_RING_ADDR(sc, 0);
else
addr = STGE_RX_RING_ADDR(sc, i + 1);
rd->stge_rx_ring[i].rfd_next = htole64(addr);
rd->stge_rx_ring[i].rfd_status = 0;
}
bus_dmamap_sync(sc->sc_cdata.stge_rx_ring_tag,
sc->sc_cdata.stge_rx_ring_map,
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
return (0);
}
/*
* stge_newbuf:
*
* Add a receive buffer to the indicated descriptor.
*/
static int
stge_newbuf(struct stge_softc *sc, int idx)
{
struct stge_rxdesc *rxd;
struct stge_rfd *rfd;
struct mbuf *m;
bus_dma_segment_t segs[1];
bus_dmamap_t map;
int nsegs;
m = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR);
if (m == NULL)
return (ENOBUFS);
m->m_len = m->m_pkthdr.len = MCLBYTES;
/*
* The hardware requires 4bytes aligned DMA address when JUMBO
* frame is used.
*/
if (sc->sc_if_framesize <= (MCLBYTES - ETHER_ALIGN))
m_adj(m, ETHER_ALIGN);
if (bus_dmamap_load_mbuf_sg(sc->sc_cdata.stge_rx_tag,
sc->sc_cdata.stge_rx_sparemap, m, segs, &nsegs, 0) != 0) {
m_freem(m);
return (ENOBUFS);
}
KASSERT(nsegs == 1, ("%s: %d segments returned!", __func__, nsegs));
rxd = &sc->sc_cdata.stge_rxdesc[idx];
if (rxd->rx_m != NULL) {
bus_dmamap_sync(sc->sc_cdata.stge_rx_tag, rxd->rx_dmamap,
BUS_DMASYNC_POSTREAD);
bus_dmamap_unload(sc->sc_cdata.stge_rx_tag, rxd->rx_dmamap);
}
map = rxd->rx_dmamap;
rxd->rx_dmamap = sc->sc_cdata.stge_rx_sparemap;
sc->sc_cdata.stge_rx_sparemap = map;
bus_dmamap_sync(sc->sc_cdata.stge_rx_tag, rxd->rx_dmamap,
BUS_DMASYNC_PREREAD);
rxd->rx_m = m;
rfd = &sc->sc_rdata.stge_rx_ring[idx];
rfd->rfd_frag.frag_word0 =
htole64(FRAG_ADDR(segs[0].ds_addr) | FRAG_LEN(segs[0].ds_len));
rfd->rfd_status = 0;
return (0);
}
/*
* stge_set_filter:
*
* Set up the receive filter.
*/
static void
stge_set_filter(struct stge_softc *sc)
{
struct ifnet *ifp;
uint16_t mode;
STGE_LOCK_ASSERT(sc);
ifp = sc->sc_ifp;
mode = CSR_READ_2(sc, STGE_ReceiveMode);
mode |= RM_ReceiveUnicast;
if ((ifp->if_flags & IFF_BROADCAST) != 0)
mode |= RM_ReceiveBroadcast;
else
mode &= ~RM_ReceiveBroadcast;
if ((ifp->if_flags & IFF_PROMISC) != 0)
mode |= RM_ReceiveAllFrames;
else
mode &= ~RM_ReceiveAllFrames;
CSR_WRITE_2(sc, STGE_ReceiveMode, mode);
}
static void
stge_set_multi(struct stge_softc *sc)
{
struct ifnet *ifp;
struct ifmultiaddr *ifma;
uint32_t crc;
uint32_t mchash[2];
uint16_t mode;
int count;
STGE_LOCK_ASSERT(sc);
ifp = sc->sc_ifp;
mode = CSR_READ_2(sc, STGE_ReceiveMode);
if ((ifp->if_flags & (IFF_PROMISC | IFF_ALLMULTI)) != 0) {
if ((ifp->if_flags & IFF_PROMISC) != 0)
mode |= RM_ReceiveAllFrames;
else if ((ifp->if_flags & IFF_ALLMULTI) != 0)
mode |= RM_ReceiveMulticast;
CSR_WRITE_2(sc, STGE_ReceiveMode, mode);
return;
}
/* clear existing filters. */
CSR_WRITE_4(sc, STGE_HashTable0, 0);
CSR_WRITE_4(sc, STGE_HashTable1, 0);
/*
* Set up the multicast address filter by passing all multicast
* addresses through a CRC generator, and then using the low-order
* 6 bits as an index into the 64 bit multicast hash table. The
* high order bits select the register, while the rest of the bits
* select the bit within the register.
*/
bzero(mchash, sizeof(mchash));
count = 0;
if_maddr_rlock(sc->sc_ifp);
TAILQ_FOREACH(ifma, &sc->sc_ifp->if_multiaddrs, ifma_link) {
if (ifma->ifma_addr->sa_family != AF_LINK)
continue;
crc = ether_crc32_be(LLADDR((struct sockaddr_dl *)
ifma->ifma_addr), ETHER_ADDR_LEN);
/* Just want the 6 least significant bits. */
crc &= 0x3f;
/* Set the corresponding bit in the hash table. */
mchash[crc >> 5] |= 1 << (crc & 0x1f);
count++;
}
if_maddr_runlock(ifp);
mode &= ~(RM_ReceiveMulticast | RM_ReceiveAllFrames);
if (count > 0)
mode |= RM_ReceiveMulticastHash;
else
mode &= ~RM_ReceiveMulticastHash;
CSR_WRITE_4(sc, STGE_HashTable0, mchash[0]);
CSR_WRITE_4(sc, STGE_HashTable1, mchash[1]);
CSR_WRITE_2(sc, STGE_ReceiveMode, mode);
}
static int
sysctl_int_range(SYSCTL_HANDLER_ARGS, int low, int high)
{
int error, value;
if (!arg1)
return (EINVAL);
value = *(int *)arg1;
error = sysctl_handle_int(oidp, &value, 0, req);
if (error || !req->newptr)
return (error);
if (value < low || value > high)
return (EINVAL);
*(int *)arg1 = value;
return (0);
}
static int
sysctl_hw_stge_rxint_nframe(SYSCTL_HANDLER_ARGS)
{
return (sysctl_int_range(oidp, arg1, arg2, req,
STGE_RXINT_NFRAME_MIN, STGE_RXINT_NFRAME_MAX));
}
static int
sysctl_hw_stge_rxint_dmawait(SYSCTL_HANDLER_ARGS)
{
return (sysctl_int_range(oidp, arg1, arg2, req,
STGE_RXINT_DMAWAIT_MIN, STGE_RXINT_DMAWAIT_MAX));
}