freebsd-src/sys/opencrypto/criov.c

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

858 lines
20 KiB
C
Raw Normal View History

/* $OpenBSD: criov.c,v 1.9 2002/01/29 15:48:29 jason Exp $ */
/*-
* Copyright (c) 1999 Theo de Raadt
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/proc.h>
#include <sys/errno.h>
#include <sys/malloc.h>
#include <sys/kernel.h>
#include <sys/mbuf.h>
#include <sys/uio.h>
#include <sys/limits.h>
#include <sys/lock.h>
#include <sys/sdt.h>
#include <machine/vmparam.h>
#include <vm/vm.h>
#include <vm/vm_page.h>
#include <vm/pmap.h>
#include <opencrypto/cryptodev.h>
SDT_PROVIDER_DECLARE(opencrypto);
/*
* These macros are only for avoiding code duplication, as we need to skip
* given number of bytes in the same way in several functions below.
*/
#define CUIO_SKIP() do { \
KASSERT(off >= 0, ("%s: off %d < 0", __func__, off)); \
KASSERT(len >= 0, ("%s: len %d < 0", __func__, len)); \
while (off > 0) { \
KASSERT(iol >= 0, ("%s: empty in skip", __func__)); \
if (off < iov->iov_len) \
break; \
off -= iov->iov_len; \
iol--; \
iov++; \
} \
} while (0)
#define CVM_PAGE_SKIP() do { \
KASSERT(off >= 0, ("%s: off %d < 0", __func__, off)); \
KASSERT(len >= 0, ("%s: len %d < 0", __func__, len)); \
while (off > 0) { \
if (off < PAGE_SIZE) \
break; \
processed += PAGE_SIZE - off; \
off -= PAGE_SIZE - off; \
pages++; \
} \
} while (0)
Add support for optional separate output buffers to in-kernel crypto. Some crypto consumers such as GELI and KTLS for file-backed sendfile need to store their output in a separate buffer from the input. Currently these consumers copy the contents of the input buffer into the output buffer and queue an in-place crypto operation on the output buffer. Using a separate output buffer avoids this copy. - Create a new 'struct crypto_buffer' describing a crypto buffer containing a type and type-specific fields. crp_ilen is gone, instead buffers that use a flat kernel buffer have a cb_buf_len field for their length. The length of other buffer types is inferred from the backing store (e.g. uio_resid for a uio). Requests now have two such structures: crp_buf for the input buffer, and crp_obuf for the output buffer. - Consumers now use helper functions (crypto_use_*, e.g. crypto_use_mbuf()) to configure the input buffer. If an output buffer is not configured, the request still modifies the input buffer in-place. A consumer uses a second set of helper functions (crypto_use_output_*) to configure an output buffer. - Consumers must request support for separate output buffers when creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are only permitted to queue a request with a separate output buffer on sessions with this flag set. Existing drivers already reject sessions with unknown flags, so this permits drivers to be modified to support this extension without requiring all drivers to change. - Several data-related functions now have matching versions that operate on an explicit buffer (e.g. crypto_apply_buf, crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf). - Most of the existing data-related functions operate on the input buffer. However crypto_copyback always writes to the output buffer if a request uses a separate output buffer. - For the regions in input/output buffers, the following conventions are followed: - AAD and IV are always present in input only and their fields are offsets into the input buffer. - payload is always present in both buffers. If a request uses a separate output buffer, it must set a new crp_payload_start_output field to the offset of the payload in the output buffer. - digest is in the input buffer for verify operations, and in the output buffer for compute operations. crp_digest_start is relative to the appropriate buffer. - Add a crypto buffer cursor abstraction. This is a more general form of some bits in the cryptosoft driver that tried to always use uio's. However, compared to the original code, this avoids rewalking the uio iovec array for requests with multiple vectors. It also avoids allocate an iovec array for mbufs and populating it by instead walking the mbuf chain directly. - Update the cryptosoft(4) driver to support separate output buffers making use of the cursor abstraction. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D24545
2020-05-25 22:12:04 +00:00
static void
cuio_copydata(struct uio* uio, int off, int len, caddr_t cp)
{
struct iovec *iov = uio->uio_iov;
int iol __diagused = uio->uio_iovcnt;
unsigned count;
CUIO_SKIP();
while (len > 0) {
KASSERT(iol >= 0, ("%s: empty", __func__));
count = min(iov->iov_len - off, len);
bcopy(((caddr_t)iov->iov_base) + off, cp, count);
len -= count;
cp += count;
off = 0;
iol--;
iov++;
}
}
Add support for optional separate output buffers to in-kernel crypto. Some crypto consumers such as GELI and KTLS for file-backed sendfile need to store their output in a separate buffer from the input. Currently these consumers copy the contents of the input buffer into the output buffer and queue an in-place crypto operation on the output buffer. Using a separate output buffer avoids this copy. - Create a new 'struct crypto_buffer' describing a crypto buffer containing a type and type-specific fields. crp_ilen is gone, instead buffers that use a flat kernel buffer have a cb_buf_len field for their length. The length of other buffer types is inferred from the backing store (e.g. uio_resid for a uio). Requests now have two such structures: crp_buf for the input buffer, and crp_obuf for the output buffer. - Consumers now use helper functions (crypto_use_*, e.g. crypto_use_mbuf()) to configure the input buffer. If an output buffer is not configured, the request still modifies the input buffer in-place. A consumer uses a second set of helper functions (crypto_use_output_*) to configure an output buffer. - Consumers must request support for separate output buffers when creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are only permitted to queue a request with a separate output buffer on sessions with this flag set. Existing drivers already reject sessions with unknown flags, so this permits drivers to be modified to support this extension without requiring all drivers to change. - Several data-related functions now have matching versions that operate on an explicit buffer (e.g. crypto_apply_buf, crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf). - Most of the existing data-related functions operate on the input buffer. However crypto_copyback always writes to the output buffer if a request uses a separate output buffer. - For the regions in input/output buffers, the following conventions are followed: - AAD and IV are always present in input only and their fields are offsets into the input buffer. - payload is always present in both buffers. If a request uses a separate output buffer, it must set a new crp_payload_start_output field to the offset of the payload in the output buffer. - digest is in the input buffer for verify operations, and in the output buffer for compute operations. crp_digest_start is relative to the appropriate buffer. - Add a crypto buffer cursor abstraction. This is a more general form of some bits in the cryptosoft driver that tried to always use uio's. However, compared to the original code, this avoids rewalking the uio iovec array for requests with multiple vectors. It also avoids allocate an iovec array for mbufs and populating it by instead walking the mbuf chain directly. - Update the cryptosoft(4) driver to support separate output buffers making use of the cursor abstraction. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D24545
2020-05-25 22:12:04 +00:00
static void
cuio_copyback(struct uio* uio, int off, int len, c_caddr_t cp)
{
struct iovec *iov = uio->uio_iov;
int iol __diagused = uio->uio_iovcnt;
unsigned count;
CUIO_SKIP();
while (len > 0) {
KASSERT(iol >= 0, ("%s: empty", __func__));
count = min(iov->iov_len - off, len);
bcopy(cp, ((caddr_t)iov->iov_base) + off, count);
len -= count;
cp += count;
off = 0;
iol--;
iov++;
}
}
/*
2014-12-12 19:56:36 +00:00
* Return the index and offset of location in iovec list.
*/
Add support for optional separate output buffers to in-kernel crypto. Some crypto consumers such as GELI and KTLS for file-backed sendfile need to store their output in a separate buffer from the input. Currently these consumers copy the contents of the input buffer into the output buffer and queue an in-place crypto operation on the output buffer. Using a separate output buffer avoids this copy. - Create a new 'struct crypto_buffer' describing a crypto buffer containing a type and type-specific fields. crp_ilen is gone, instead buffers that use a flat kernel buffer have a cb_buf_len field for their length. The length of other buffer types is inferred from the backing store (e.g. uio_resid for a uio). Requests now have two such structures: crp_buf for the input buffer, and crp_obuf for the output buffer. - Consumers now use helper functions (crypto_use_*, e.g. crypto_use_mbuf()) to configure the input buffer. If an output buffer is not configured, the request still modifies the input buffer in-place. A consumer uses a second set of helper functions (crypto_use_output_*) to configure an output buffer. - Consumers must request support for separate output buffers when creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are only permitted to queue a request with a separate output buffer on sessions with this flag set. Existing drivers already reject sessions with unknown flags, so this permits drivers to be modified to support this extension without requiring all drivers to change. - Several data-related functions now have matching versions that operate on an explicit buffer (e.g. crypto_apply_buf, crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf). - Most of the existing data-related functions operate on the input buffer. However crypto_copyback always writes to the output buffer if a request uses a separate output buffer. - For the regions in input/output buffers, the following conventions are followed: - AAD and IV are always present in input only and their fields are offsets into the input buffer. - payload is always present in both buffers. If a request uses a separate output buffer, it must set a new crp_payload_start_output field to the offset of the payload in the output buffer. - digest is in the input buffer for verify operations, and in the output buffer for compute operations. crp_digest_start is relative to the appropriate buffer. - Add a crypto buffer cursor abstraction. This is a more general form of some bits in the cryptosoft driver that tried to always use uio's. However, compared to the original code, this avoids rewalking the uio iovec array for requests with multiple vectors. It also avoids allocate an iovec array for mbufs and populating it by instead walking the mbuf chain directly. - Update the cryptosoft(4) driver to support separate output buffers making use of the cursor abstraction. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D24545
2020-05-25 22:12:04 +00:00
static int
cuio_getptr(struct uio *uio, int loc, int *off)
{
2014-12-12 19:56:36 +00:00
int ind, len;
2014-12-12 19:56:36 +00:00
ind = 0;
while (loc >= 0 && ind < uio->uio_iovcnt) {
len = uio->uio_iov[ind].iov_len;
if (len > loc) {
*off = loc;
2014-12-12 19:56:36 +00:00
return (ind);
}
2014-12-12 19:56:36 +00:00
loc -= len;
ind++;
}
2014-12-12 19:56:36 +00:00
if (ind > 0 && loc == 0) {
ind--;
*off = uio->uio_iov[ind].iov_len;
return (ind);
}
2014-12-12 19:56:36 +00:00
return (-1);
}
#if CRYPTO_MAY_HAVE_VMPAGE
/*
* Apply function f to the data in a vm_page_t list starting "off" bytes from
* the beginning, continuing for "len" bytes.
*/
static int
cvm_page_apply(vm_page_t *pages, int off, int len,
int (*f)(void *, const void *, u_int), void *arg)
{
int processed __unused;
unsigned count;
int rval;
processed = 0;
CVM_PAGE_SKIP();
while (len > 0) {
char *kaddr = (char *)PHYS_TO_DMAP(VM_PAGE_TO_PHYS(*pages));
count = min(PAGE_SIZE - off, len);
rval = (*f)(arg, kaddr + off, count);
if (rval)
return (rval);
len -= count;
processed += count;
off = 0;
pages++;
}
return (0);
}
static inline void *
cvm_page_contiguous_segment(vm_page_t *pages, size_t skip, int len)
{
if ((skip + len - 1) / PAGE_SIZE > skip / PAGE_SIZE)
return (NULL);
pages += (skip / PAGE_SIZE);
skip -= rounddown(skip, PAGE_SIZE);
return (((char *)PHYS_TO_DMAP(VM_PAGE_TO_PHYS(*pages))) + skip);
}
/*
* Copy len bytes of data from the vm_page_t array, skipping the first off
* bytes, into the pointer cp. Return the number of bytes skipped and copied.
* Does not verify the length of the array.
*/
static int
cvm_page_copyback(vm_page_t *pages, int off, int len, c_caddr_t cp)
{
int processed = 0;
unsigned count;
CVM_PAGE_SKIP();
while (len > 0) {
count = min(PAGE_SIZE - off, len);
bcopy(cp, (char *)PHYS_TO_DMAP(VM_PAGE_TO_PHYS(*pages)) + off,
count);
len -= count;
cp += count;
processed += count;
off = 0;
pages++;
}
return (processed);
}
/*
* Copy len bytes of data from the pointer cp into the vm_page_t array,
* skipping the first off bytes, Return the number of bytes skipped and copied.
* Does not verify the length of the array.
*/
static int
cvm_page_copydata(vm_page_t *pages, int off, int len, caddr_t cp)
{
int processed = 0;
unsigned count;
CVM_PAGE_SKIP();
while (len > 0) {
count = min(PAGE_SIZE - off, len);
bcopy(((char *)PHYS_TO_DMAP(VM_PAGE_TO_PHYS(*pages)) + off), cp,
count);
len -= count;
cp += count;
processed += count;
off = 0;
pages++;
}
return processed;
}
#endif /* CRYPTO_MAY_HAVE_VMPAGE */
/*
* Given a starting page in an m_epg, determine the length of the
* current physically contiguous segment.
*/
static __inline size_t
m_epg_pages_extent(struct mbuf *m, int idx, u_int pglen)
{
size_t len;
u_int i;
len = pglen;
for (i = idx + 1; i < m->m_epg_npgs; i++) {
if (m->m_epg_pa[i - 1] + PAGE_SIZE != m->m_epg_pa[i])
break;
len += m_epg_pagelen(m, i, 0);
}
return (len);
}
static void *
m_epg_segment(struct mbuf *m, size_t offset, size_t *len)
{
u_int i, pglen, pgoff;
offset += mtod(m, vm_offset_t);
if (offset < m->m_epg_hdrlen) {
*len = m->m_epg_hdrlen - offset;
return (m->m_epg_hdr + offset);
}
offset -= m->m_epg_hdrlen;
pgoff = m->m_epg_1st_off;
for (i = 0; i < m->m_epg_npgs; i++) {
pglen = m_epg_pagelen(m, i, pgoff);
if (offset < pglen) {
*len = m_epg_pages_extent(m, i, pglen) - offset;
return ((void *)PHYS_TO_DMAP(m->m_epg_pa[i] + pgoff +
offset));
}
offset -= pglen;
pgoff = 0;
}
KASSERT(offset <= m->m_epg_trllen, ("%s: offset beyond trailer",
__func__));
*len = m->m_epg_trllen - offset;
return (m->m_epg_trail + offset);
}
static __inline void *
m_epg_contiguous_subsegment(struct mbuf *m, size_t skip, size_t len)
{
void *base;
size_t seglen;
base = m_epg_segment(m, skip, &seglen);
if (len > seglen)
return (NULL);
return (base);
}
Add support for optional separate output buffers to in-kernel crypto. Some crypto consumers such as GELI and KTLS for file-backed sendfile need to store their output in a separate buffer from the input. Currently these consumers copy the contents of the input buffer into the output buffer and queue an in-place crypto operation on the output buffer. Using a separate output buffer avoids this copy. - Create a new 'struct crypto_buffer' describing a crypto buffer containing a type and type-specific fields. crp_ilen is gone, instead buffers that use a flat kernel buffer have a cb_buf_len field for their length. The length of other buffer types is inferred from the backing store (e.g. uio_resid for a uio). Requests now have two such structures: crp_buf for the input buffer, and crp_obuf for the output buffer. - Consumers now use helper functions (crypto_use_*, e.g. crypto_use_mbuf()) to configure the input buffer. If an output buffer is not configured, the request still modifies the input buffer in-place. A consumer uses a second set of helper functions (crypto_use_output_*) to configure an output buffer. - Consumers must request support for separate output buffers when creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are only permitted to queue a request with a separate output buffer on sessions with this flag set. Existing drivers already reject sessions with unknown flags, so this permits drivers to be modified to support this extension without requiring all drivers to change. - Several data-related functions now have matching versions that operate on an explicit buffer (e.g. crypto_apply_buf, crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf). - Most of the existing data-related functions operate on the input buffer. However crypto_copyback always writes to the output buffer if a request uses a separate output buffer. - For the regions in input/output buffers, the following conventions are followed: - AAD and IV are always present in input only and their fields are offsets into the input buffer. - payload is always present in both buffers. If a request uses a separate output buffer, it must set a new crp_payload_start_output field to the offset of the payload in the output buffer. - digest is in the input buffer for verify operations, and in the output buffer for compute operations. crp_digest_start is relative to the appropriate buffer. - Add a crypto buffer cursor abstraction. This is a more general form of some bits in the cryptosoft driver that tried to always use uio's. However, compared to the original code, this avoids rewalking the uio iovec array for requests with multiple vectors. It also avoids allocate an iovec array for mbufs and populating it by instead walking the mbuf chain directly. - Update the cryptosoft(4) driver to support separate output buffers making use of the cursor abstraction. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D24545
2020-05-25 22:12:04 +00:00
void
crypto_cursor_init(struct crypto_buffer_cursor *cc,
const struct crypto_buffer *cb)
{
memset(cc, 0, sizeof(*cc));
cc->cc_type = cb->cb_type;
switch (cc->cc_type) {
case CRYPTO_BUF_CONTIG:
cc->cc_buf = cb->cb_buf;
cc->cc_buf_len = cb->cb_buf_len;
break;
case CRYPTO_BUF_MBUF:
case CRYPTO_BUF_SINGLE_MBUF:
Add support for optional separate output buffers to in-kernel crypto. Some crypto consumers such as GELI and KTLS for file-backed sendfile need to store their output in a separate buffer from the input. Currently these consumers copy the contents of the input buffer into the output buffer and queue an in-place crypto operation on the output buffer. Using a separate output buffer avoids this copy. - Create a new 'struct crypto_buffer' describing a crypto buffer containing a type and type-specific fields. crp_ilen is gone, instead buffers that use a flat kernel buffer have a cb_buf_len field for their length. The length of other buffer types is inferred from the backing store (e.g. uio_resid for a uio). Requests now have two such structures: crp_buf for the input buffer, and crp_obuf for the output buffer. - Consumers now use helper functions (crypto_use_*, e.g. crypto_use_mbuf()) to configure the input buffer. If an output buffer is not configured, the request still modifies the input buffer in-place. A consumer uses a second set of helper functions (crypto_use_output_*) to configure an output buffer. - Consumers must request support for separate output buffers when creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are only permitted to queue a request with a separate output buffer on sessions with this flag set. Existing drivers already reject sessions with unknown flags, so this permits drivers to be modified to support this extension without requiring all drivers to change. - Several data-related functions now have matching versions that operate on an explicit buffer (e.g. crypto_apply_buf, crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf). - Most of the existing data-related functions operate on the input buffer. However crypto_copyback always writes to the output buffer if a request uses a separate output buffer. - For the regions in input/output buffers, the following conventions are followed: - AAD and IV are always present in input only and their fields are offsets into the input buffer. - payload is always present in both buffers. If a request uses a separate output buffer, it must set a new crp_payload_start_output field to the offset of the payload in the output buffer. - digest is in the input buffer for verify operations, and in the output buffer for compute operations. crp_digest_start is relative to the appropriate buffer. - Add a crypto buffer cursor abstraction. This is a more general form of some bits in the cryptosoft driver that tried to always use uio's. However, compared to the original code, this avoids rewalking the uio iovec array for requests with multiple vectors. It also avoids allocate an iovec array for mbufs and populating it by instead walking the mbuf chain directly. - Update the cryptosoft(4) driver to support separate output buffers making use of the cursor abstraction. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D24545
2020-05-25 22:12:04 +00:00
cc->cc_mbuf = cb->cb_mbuf;
break;
case CRYPTO_BUF_VMPAGE:
cc->cc_vmpage = cb->cb_vm_page;
cc->cc_buf_len = cb->cb_vm_page_len;
cc->cc_offset = cb->cb_vm_page_offset;
break;
Add support for optional separate output buffers to in-kernel crypto. Some crypto consumers such as GELI and KTLS for file-backed sendfile need to store their output in a separate buffer from the input. Currently these consumers copy the contents of the input buffer into the output buffer and queue an in-place crypto operation on the output buffer. Using a separate output buffer avoids this copy. - Create a new 'struct crypto_buffer' describing a crypto buffer containing a type and type-specific fields. crp_ilen is gone, instead buffers that use a flat kernel buffer have a cb_buf_len field for their length. The length of other buffer types is inferred from the backing store (e.g. uio_resid for a uio). Requests now have two such structures: crp_buf for the input buffer, and crp_obuf for the output buffer. - Consumers now use helper functions (crypto_use_*, e.g. crypto_use_mbuf()) to configure the input buffer. If an output buffer is not configured, the request still modifies the input buffer in-place. A consumer uses a second set of helper functions (crypto_use_output_*) to configure an output buffer. - Consumers must request support for separate output buffers when creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are only permitted to queue a request with a separate output buffer on sessions with this flag set. Existing drivers already reject sessions with unknown flags, so this permits drivers to be modified to support this extension without requiring all drivers to change. - Several data-related functions now have matching versions that operate on an explicit buffer (e.g. crypto_apply_buf, crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf). - Most of the existing data-related functions operate on the input buffer. However crypto_copyback always writes to the output buffer if a request uses a separate output buffer. - For the regions in input/output buffers, the following conventions are followed: - AAD and IV are always present in input only and their fields are offsets into the input buffer. - payload is always present in both buffers. If a request uses a separate output buffer, it must set a new crp_payload_start_output field to the offset of the payload in the output buffer. - digest is in the input buffer for verify operations, and in the output buffer for compute operations. crp_digest_start is relative to the appropriate buffer. - Add a crypto buffer cursor abstraction. This is a more general form of some bits in the cryptosoft driver that tried to always use uio's. However, compared to the original code, this avoids rewalking the uio iovec array for requests with multiple vectors. It also avoids allocate an iovec array for mbufs and populating it by instead walking the mbuf chain directly. - Update the cryptosoft(4) driver to support separate output buffers making use of the cursor abstraction. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D24545
2020-05-25 22:12:04 +00:00
case CRYPTO_BUF_UIO:
cc->cc_iov = cb->cb_uio->uio_iov;
cc->cc_buf_len = cb->cb_uio->uio_resid;
Add support for optional separate output buffers to in-kernel crypto. Some crypto consumers such as GELI and KTLS for file-backed sendfile need to store their output in a separate buffer from the input. Currently these consumers copy the contents of the input buffer into the output buffer and queue an in-place crypto operation on the output buffer. Using a separate output buffer avoids this copy. - Create a new 'struct crypto_buffer' describing a crypto buffer containing a type and type-specific fields. crp_ilen is gone, instead buffers that use a flat kernel buffer have a cb_buf_len field for their length. The length of other buffer types is inferred from the backing store (e.g. uio_resid for a uio). Requests now have two such structures: crp_buf for the input buffer, and crp_obuf for the output buffer. - Consumers now use helper functions (crypto_use_*, e.g. crypto_use_mbuf()) to configure the input buffer. If an output buffer is not configured, the request still modifies the input buffer in-place. A consumer uses a second set of helper functions (crypto_use_output_*) to configure an output buffer. - Consumers must request support for separate output buffers when creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are only permitted to queue a request with a separate output buffer on sessions with this flag set. Existing drivers already reject sessions with unknown flags, so this permits drivers to be modified to support this extension without requiring all drivers to change. - Several data-related functions now have matching versions that operate on an explicit buffer (e.g. crypto_apply_buf, crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf). - Most of the existing data-related functions operate on the input buffer. However crypto_copyback always writes to the output buffer if a request uses a separate output buffer. - For the regions in input/output buffers, the following conventions are followed: - AAD and IV are always present in input only and their fields are offsets into the input buffer. - payload is always present in both buffers. If a request uses a separate output buffer, it must set a new crp_payload_start_output field to the offset of the payload in the output buffer. - digest is in the input buffer for verify operations, and in the output buffer for compute operations. crp_digest_start is relative to the appropriate buffer. - Add a crypto buffer cursor abstraction. This is a more general form of some bits in the cryptosoft driver that tried to always use uio's. However, compared to the original code, this avoids rewalking the uio iovec array for requests with multiple vectors. It also avoids allocate an iovec array for mbufs and populating it by instead walking the mbuf chain directly. - Update the cryptosoft(4) driver to support separate output buffers making use of the cursor abstraction. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D24545
2020-05-25 22:12:04 +00:00
break;
default:
#ifdef INVARIANTS
panic("%s: invalid buffer type %d", __func__, cb->cb_type);
#endif
break;
}
}
SDT_PROBE_DEFINE2(opencrypto, criov, cursor_advance, vmpage, "struct crypto_buffer_cursor*", "size_t");
Add support for optional separate output buffers to in-kernel crypto. Some crypto consumers such as GELI and KTLS for file-backed sendfile need to store their output in a separate buffer from the input. Currently these consumers copy the contents of the input buffer into the output buffer and queue an in-place crypto operation on the output buffer. Using a separate output buffer avoids this copy. - Create a new 'struct crypto_buffer' describing a crypto buffer containing a type and type-specific fields. crp_ilen is gone, instead buffers that use a flat kernel buffer have a cb_buf_len field for their length. The length of other buffer types is inferred from the backing store (e.g. uio_resid for a uio). Requests now have two such structures: crp_buf for the input buffer, and crp_obuf for the output buffer. - Consumers now use helper functions (crypto_use_*, e.g. crypto_use_mbuf()) to configure the input buffer. If an output buffer is not configured, the request still modifies the input buffer in-place. A consumer uses a second set of helper functions (crypto_use_output_*) to configure an output buffer. - Consumers must request support for separate output buffers when creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are only permitted to queue a request with a separate output buffer on sessions with this flag set. Existing drivers already reject sessions with unknown flags, so this permits drivers to be modified to support this extension without requiring all drivers to change. - Several data-related functions now have matching versions that operate on an explicit buffer (e.g. crypto_apply_buf, crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf). - Most of the existing data-related functions operate on the input buffer. However crypto_copyback always writes to the output buffer if a request uses a separate output buffer. - For the regions in input/output buffers, the following conventions are followed: - AAD and IV are always present in input only and their fields are offsets into the input buffer. - payload is always present in both buffers. If a request uses a separate output buffer, it must set a new crp_payload_start_output field to the offset of the payload in the output buffer. - digest is in the input buffer for verify operations, and in the output buffer for compute operations. crp_digest_start is relative to the appropriate buffer. - Add a crypto buffer cursor abstraction. This is a more general form of some bits in the cryptosoft driver that tried to always use uio's. However, compared to the original code, this avoids rewalking the uio iovec array for requests with multiple vectors. It also avoids allocate an iovec array for mbufs and populating it by instead walking the mbuf chain directly. - Update the cryptosoft(4) driver to support separate output buffers making use of the cursor abstraction. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D24545
2020-05-25 22:12:04 +00:00
void
crypto_cursor_advance(struct crypto_buffer_cursor *cc, size_t amount)
{
size_t remain;
switch (cc->cc_type) {
case CRYPTO_BUF_CONTIG:
MPASS(cc->cc_buf_len >= amount);
cc->cc_buf += amount;
cc->cc_buf_len -= amount;
break;
case CRYPTO_BUF_MBUF:
for (;;) {
remain = cc->cc_mbuf->m_len - cc->cc_offset;
if (amount < remain) {
cc->cc_offset += amount;
break;
}
amount -= remain;
cc->cc_mbuf = cc->cc_mbuf->m_next;
cc->cc_offset = 0;
if (amount == 0)
break;
}
break;
case CRYPTO_BUF_SINGLE_MBUF:
MPASS(cc->cc_mbuf->m_len >= cc->cc_offset + amount);
cc->cc_offset += amount;
break;
case CRYPTO_BUF_VMPAGE:
for (;;) {
SDT_PROBE2(opencrypto, criov, cursor_advance, vmpage,
cc, amount);
remain = MIN(PAGE_SIZE - cc->cc_offset, cc->cc_buf_len);
if (amount < remain) {
cc->cc_buf_len -= amount;
cc->cc_offset += amount;
break;
}
cc->cc_buf_len -= remain;
amount -= remain;
cc->cc_vmpage++;
cc->cc_offset = 0;
if (amount == 0 || cc->cc_buf_len == 0)
break;
}
break;
Add support for optional separate output buffers to in-kernel crypto. Some crypto consumers such as GELI and KTLS for file-backed sendfile need to store their output in a separate buffer from the input. Currently these consumers copy the contents of the input buffer into the output buffer and queue an in-place crypto operation on the output buffer. Using a separate output buffer avoids this copy. - Create a new 'struct crypto_buffer' describing a crypto buffer containing a type and type-specific fields. crp_ilen is gone, instead buffers that use a flat kernel buffer have a cb_buf_len field for their length. The length of other buffer types is inferred from the backing store (e.g. uio_resid for a uio). Requests now have two such structures: crp_buf for the input buffer, and crp_obuf for the output buffer. - Consumers now use helper functions (crypto_use_*, e.g. crypto_use_mbuf()) to configure the input buffer. If an output buffer is not configured, the request still modifies the input buffer in-place. A consumer uses a second set of helper functions (crypto_use_output_*) to configure an output buffer. - Consumers must request support for separate output buffers when creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are only permitted to queue a request with a separate output buffer on sessions with this flag set. Existing drivers already reject sessions with unknown flags, so this permits drivers to be modified to support this extension without requiring all drivers to change. - Several data-related functions now have matching versions that operate on an explicit buffer (e.g. crypto_apply_buf, crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf). - Most of the existing data-related functions operate on the input buffer. However crypto_copyback always writes to the output buffer if a request uses a separate output buffer. - For the regions in input/output buffers, the following conventions are followed: - AAD and IV are always present in input only and their fields are offsets into the input buffer. - payload is always present in both buffers. If a request uses a separate output buffer, it must set a new crp_payload_start_output field to the offset of the payload in the output buffer. - digest is in the input buffer for verify operations, and in the output buffer for compute operations. crp_digest_start is relative to the appropriate buffer. - Add a crypto buffer cursor abstraction. This is a more general form of some bits in the cryptosoft driver that tried to always use uio's. However, compared to the original code, this avoids rewalking the uio iovec array for requests with multiple vectors. It also avoids allocate an iovec array for mbufs and populating it by instead walking the mbuf chain directly. - Update the cryptosoft(4) driver to support separate output buffers making use of the cursor abstraction. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D24545
2020-05-25 22:12:04 +00:00
case CRYPTO_BUF_UIO:
for (;;) {
remain = cc->cc_iov->iov_len - cc->cc_offset;
if (amount < remain) {
cc->cc_offset += amount;
break;
}
cc->cc_buf_len -= remain;
Add support for optional separate output buffers to in-kernel crypto. Some crypto consumers such as GELI and KTLS for file-backed sendfile need to store their output in a separate buffer from the input. Currently these consumers copy the contents of the input buffer into the output buffer and queue an in-place crypto operation on the output buffer. Using a separate output buffer avoids this copy. - Create a new 'struct crypto_buffer' describing a crypto buffer containing a type and type-specific fields. crp_ilen is gone, instead buffers that use a flat kernel buffer have a cb_buf_len field for their length. The length of other buffer types is inferred from the backing store (e.g. uio_resid for a uio). Requests now have two such structures: crp_buf for the input buffer, and crp_obuf for the output buffer. - Consumers now use helper functions (crypto_use_*, e.g. crypto_use_mbuf()) to configure the input buffer. If an output buffer is not configured, the request still modifies the input buffer in-place. A consumer uses a second set of helper functions (crypto_use_output_*) to configure an output buffer. - Consumers must request support for separate output buffers when creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are only permitted to queue a request with a separate output buffer on sessions with this flag set. Existing drivers already reject sessions with unknown flags, so this permits drivers to be modified to support this extension without requiring all drivers to change. - Several data-related functions now have matching versions that operate on an explicit buffer (e.g. crypto_apply_buf, crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf). - Most of the existing data-related functions operate on the input buffer. However crypto_copyback always writes to the output buffer if a request uses a separate output buffer. - For the regions in input/output buffers, the following conventions are followed: - AAD and IV are always present in input only and their fields are offsets into the input buffer. - payload is always present in both buffers. If a request uses a separate output buffer, it must set a new crp_payload_start_output field to the offset of the payload in the output buffer. - digest is in the input buffer for verify operations, and in the output buffer for compute operations. crp_digest_start is relative to the appropriate buffer. - Add a crypto buffer cursor abstraction. This is a more general form of some bits in the cryptosoft driver that tried to always use uio's. However, compared to the original code, this avoids rewalking the uio iovec array for requests with multiple vectors. It also avoids allocate an iovec array for mbufs and populating it by instead walking the mbuf chain directly. - Update the cryptosoft(4) driver to support separate output buffers making use of the cursor abstraction. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D24545
2020-05-25 22:12:04 +00:00
amount -= remain;
cc->cc_iov++;
cc->cc_offset = 0;
if (amount == 0)
break;
}
break;
default:
#ifdef INVARIANTS
panic("%s: invalid buffer type %d", __func__, cc->cc_type);
#endif
break;
}
}
void *
crypto_cursor_segment(struct crypto_buffer_cursor *cc, size_t *len)
Add support for optional separate output buffers to in-kernel crypto. Some crypto consumers such as GELI and KTLS for file-backed sendfile need to store their output in a separate buffer from the input. Currently these consumers copy the contents of the input buffer into the output buffer and queue an in-place crypto operation on the output buffer. Using a separate output buffer avoids this copy. - Create a new 'struct crypto_buffer' describing a crypto buffer containing a type and type-specific fields. crp_ilen is gone, instead buffers that use a flat kernel buffer have a cb_buf_len field for their length. The length of other buffer types is inferred from the backing store (e.g. uio_resid for a uio). Requests now have two such structures: crp_buf for the input buffer, and crp_obuf for the output buffer. - Consumers now use helper functions (crypto_use_*, e.g. crypto_use_mbuf()) to configure the input buffer. If an output buffer is not configured, the request still modifies the input buffer in-place. A consumer uses a second set of helper functions (crypto_use_output_*) to configure an output buffer. - Consumers must request support for separate output buffers when creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are only permitted to queue a request with a separate output buffer on sessions with this flag set. Existing drivers already reject sessions with unknown flags, so this permits drivers to be modified to support this extension without requiring all drivers to change. - Several data-related functions now have matching versions that operate on an explicit buffer (e.g. crypto_apply_buf, crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf). - Most of the existing data-related functions operate on the input buffer. However crypto_copyback always writes to the output buffer if a request uses a separate output buffer. - For the regions in input/output buffers, the following conventions are followed: - AAD and IV are always present in input only and their fields are offsets into the input buffer. - payload is always present in both buffers. If a request uses a separate output buffer, it must set a new crp_payload_start_output field to the offset of the payload in the output buffer. - digest is in the input buffer for verify operations, and in the output buffer for compute operations. crp_digest_start is relative to the appropriate buffer. - Add a crypto buffer cursor abstraction. This is a more general form of some bits in the cryptosoft driver that tried to always use uio's. However, compared to the original code, this avoids rewalking the uio iovec array for requests with multiple vectors. It also avoids allocate an iovec array for mbufs and populating it by instead walking the mbuf chain directly. - Update the cryptosoft(4) driver to support separate output buffers making use of the cursor abstraction. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D24545
2020-05-25 22:12:04 +00:00
{
switch (cc->cc_type) {
case CRYPTO_BUF_CONTIG:
case CRYPTO_BUF_UIO:
case CRYPTO_BUF_VMPAGE:
if (cc->cc_buf_len == 0) {
*len = 0;
return (NULL);
}
break;
Add support for optional separate output buffers to in-kernel crypto. Some crypto consumers such as GELI and KTLS for file-backed sendfile need to store their output in a separate buffer from the input. Currently these consumers copy the contents of the input buffer into the output buffer and queue an in-place crypto operation on the output buffer. Using a separate output buffer avoids this copy. - Create a new 'struct crypto_buffer' describing a crypto buffer containing a type and type-specific fields. crp_ilen is gone, instead buffers that use a flat kernel buffer have a cb_buf_len field for their length. The length of other buffer types is inferred from the backing store (e.g. uio_resid for a uio). Requests now have two such structures: crp_buf for the input buffer, and crp_obuf for the output buffer. - Consumers now use helper functions (crypto_use_*, e.g. crypto_use_mbuf()) to configure the input buffer. If an output buffer is not configured, the request still modifies the input buffer in-place. A consumer uses a second set of helper functions (crypto_use_output_*) to configure an output buffer. - Consumers must request support for separate output buffers when creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are only permitted to queue a request with a separate output buffer on sessions with this flag set. Existing drivers already reject sessions with unknown flags, so this permits drivers to be modified to support this extension without requiring all drivers to change. - Several data-related functions now have matching versions that operate on an explicit buffer (e.g. crypto_apply_buf, crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf). - Most of the existing data-related functions operate on the input buffer. However crypto_copyback always writes to the output buffer if a request uses a separate output buffer. - For the regions in input/output buffers, the following conventions are followed: - AAD and IV are always present in input only and their fields are offsets into the input buffer. - payload is always present in both buffers. If a request uses a separate output buffer, it must set a new crp_payload_start_output field to the offset of the payload in the output buffer. - digest is in the input buffer for verify operations, and in the output buffer for compute operations. crp_digest_start is relative to the appropriate buffer. - Add a crypto buffer cursor abstraction. This is a more general form of some bits in the cryptosoft driver that tried to always use uio's. However, compared to the original code, this avoids rewalking the uio iovec array for requests with multiple vectors. It also avoids allocate an iovec array for mbufs and populating it by instead walking the mbuf chain directly. - Update the cryptosoft(4) driver to support separate output buffers making use of the cursor abstraction. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D24545
2020-05-25 22:12:04 +00:00
case CRYPTO_BUF_MBUF:
case CRYPTO_BUF_SINGLE_MBUF:
if (cc->cc_mbuf == NULL) {
*len = 0;
Add support for optional separate output buffers to in-kernel crypto. Some crypto consumers such as GELI and KTLS for file-backed sendfile need to store their output in a separate buffer from the input. Currently these consumers copy the contents of the input buffer into the output buffer and queue an in-place crypto operation on the output buffer. Using a separate output buffer avoids this copy. - Create a new 'struct crypto_buffer' describing a crypto buffer containing a type and type-specific fields. crp_ilen is gone, instead buffers that use a flat kernel buffer have a cb_buf_len field for their length. The length of other buffer types is inferred from the backing store (e.g. uio_resid for a uio). Requests now have two such structures: crp_buf for the input buffer, and crp_obuf for the output buffer. - Consumers now use helper functions (crypto_use_*, e.g. crypto_use_mbuf()) to configure the input buffer. If an output buffer is not configured, the request still modifies the input buffer in-place. A consumer uses a second set of helper functions (crypto_use_output_*) to configure an output buffer. - Consumers must request support for separate output buffers when creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are only permitted to queue a request with a separate output buffer on sessions with this flag set. Existing drivers already reject sessions with unknown flags, so this permits drivers to be modified to support this extension without requiring all drivers to change. - Several data-related functions now have matching versions that operate on an explicit buffer (e.g. crypto_apply_buf, crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf). - Most of the existing data-related functions operate on the input buffer. However crypto_copyback always writes to the output buffer if a request uses a separate output buffer. - For the regions in input/output buffers, the following conventions are followed: - AAD and IV are always present in input only and their fields are offsets into the input buffer. - payload is always present in both buffers. If a request uses a separate output buffer, it must set a new crp_payload_start_output field to the offset of the payload in the output buffer. - digest is in the input buffer for verify operations, and in the output buffer for compute operations. crp_digest_start is relative to the appropriate buffer. - Add a crypto buffer cursor abstraction. This is a more general form of some bits in the cryptosoft driver that tried to always use uio's. However, compared to the original code, this avoids rewalking the uio iovec array for requests with multiple vectors. It also avoids allocate an iovec array for mbufs and populating it by instead walking the mbuf chain directly. - Update the cryptosoft(4) driver to support separate output buffers making use of the cursor abstraction. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D24545
2020-05-25 22:12:04 +00:00
return (NULL);
}
break;
default:
#ifdef INVARIANTS
panic("%s: invalid buffer type %d", __func__, cc->cc_type);
#endif
*len = 0;
return (NULL);
}
switch (cc->cc_type) {
case CRYPTO_BUF_CONTIG:
*len = cc->cc_buf_len;
return (cc->cc_buf);
case CRYPTO_BUF_MBUF:
case CRYPTO_BUF_SINGLE_MBUF:
if (cc->cc_mbuf->m_flags & M_EXTPG)
return (m_epg_segment(cc->cc_mbuf, cc->cc_offset, len));
*len = cc->cc_mbuf->m_len - cc->cc_offset;
Add support for optional separate output buffers to in-kernel crypto. Some crypto consumers such as GELI and KTLS for file-backed sendfile need to store their output in a separate buffer from the input. Currently these consumers copy the contents of the input buffer into the output buffer and queue an in-place crypto operation on the output buffer. Using a separate output buffer avoids this copy. - Create a new 'struct crypto_buffer' describing a crypto buffer containing a type and type-specific fields. crp_ilen is gone, instead buffers that use a flat kernel buffer have a cb_buf_len field for their length. The length of other buffer types is inferred from the backing store (e.g. uio_resid for a uio). Requests now have two such structures: crp_buf for the input buffer, and crp_obuf for the output buffer. - Consumers now use helper functions (crypto_use_*, e.g. crypto_use_mbuf()) to configure the input buffer. If an output buffer is not configured, the request still modifies the input buffer in-place. A consumer uses a second set of helper functions (crypto_use_output_*) to configure an output buffer. - Consumers must request support for separate output buffers when creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are only permitted to queue a request with a separate output buffer on sessions with this flag set. Existing drivers already reject sessions with unknown flags, so this permits drivers to be modified to support this extension without requiring all drivers to change. - Several data-related functions now have matching versions that operate on an explicit buffer (e.g. crypto_apply_buf, crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf). - Most of the existing data-related functions operate on the input buffer. However crypto_copyback always writes to the output buffer if a request uses a separate output buffer. - For the regions in input/output buffers, the following conventions are followed: - AAD and IV are always present in input only and their fields are offsets into the input buffer. - payload is always present in both buffers. If a request uses a separate output buffer, it must set a new crp_payload_start_output field to the offset of the payload in the output buffer. - digest is in the input buffer for verify operations, and in the output buffer for compute operations. crp_digest_start is relative to the appropriate buffer. - Add a crypto buffer cursor abstraction. This is a more general form of some bits in the cryptosoft driver that tried to always use uio's. However, compared to the original code, this avoids rewalking the uio iovec array for requests with multiple vectors. It also avoids allocate an iovec array for mbufs and populating it by instead walking the mbuf chain directly. - Update the cryptosoft(4) driver to support separate output buffers making use of the cursor abstraction. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D24545
2020-05-25 22:12:04 +00:00
return (mtod(cc->cc_mbuf, char *) + cc->cc_offset);
case CRYPTO_BUF_VMPAGE:
*len = PAGE_SIZE - cc->cc_offset;
return ((char *)PHYS_TO_DMAP(VM_PAGE_TO_PHYS(
*cc->cc_vmpage)) + cc->cc_offset);
Add support for optional separate output buffers to in-kernel crypto. Some crypto consumers such as GELI and KTLS for file-backed sendfile need to store their output in a separate buffer from the input. Currently these consumers copy the contents of the input buffer into the output buffer and queue an in-place crypto operation on the output buffer. Using a separate output buffer avoids this copy. - Create a new 'struct crypto_buffer' describing a crypto buffer containing a type and type-specific fields. crp_ilen is gone, instead buffers that use a flat kernel buffer have a cb_buf_len field for their length. The length of other buffer types is inferred from the backing store (e.g. uio_resid for a uio). Requests now have two such structures: crp_buf for the input buffer, and crp_obuf for the output buffer. - Consumers now use helper functions (crypto_use_*, e.g. crypto_use_mbuf()) to configure the input buffer. If an output buffer is not configured, the request still modifies the input buffer in-place. A consumer uses a second set of helper functions (crypto_use_output_*) to configure an output buffer. - Consumers must request support for separate output buffers when creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are only permitted to queue a request with a separate output buffer on sessions with this flag set. Existing drivers already reject sessions with unknown flags, so this permits drivers to be modified to support this extension without requiring all drivers to change. - Several data-related functions now have matching versions that operate on an explicit buffer (e.g. crypto_apply_buf, crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf). - Most of the existing data-related functions operate on the input buffer. However crypto_copyback always writes to the output buffer if a request uses a separate output buffer. - For the regions in input/output buffers, the following conventions are followed: - AAD and IV are always present in input only and their fields are offsets into the input buffer. - payload is always present in both buffers. If a request uses a separate output buffer, it must set a new crp_payload_start_output field to the offset of the payload in the output buffer. - digest is in the input buffer for verify operations, and in the output buffer for compute operations. crp_digest_start is relative to the appropriate buffer. - Add a crypto buffer cursor abstraction. This is a more general form of some bits in the cryptosoft driver that tried to always use uio's. However, compared to the original code, this avoids rewalking the uio iovec array for requests with multiple vectors. It also avoids allocate an iovec array for mbufs and populating it by instead walking the mbuf chain directly. - Update the cryptosoft(4) driver to support separate output buffers making use of the cursor abstraction. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D24545
2020-05-25 22:12:04 +00:00
case CRYPTO_BUF_UIO:
*len = cc->cc_iov->iov_len - cc->cc_offset;
Add support for optional separate output buffers to in-kernel crypto. Some crypto consumers such as GELI and KTLS for file-backed sendfile need to store their output in a separate buffer from the input. Currently these consumers copy the contents of the input buffer into the output buffer and queue an in-place crypto operation on the output buffer. Using a separate output buffer avoids this copy. - Create a new 'struct crypto_buffer' describing a crypto buffer containing a type and type-specific fields. crp_ilen is gone, instead buffers that use a flat kernel buffer have a cb_buf_len field for their length. The length of other buffer types is inferred from the backing store (e.g. uio_resid for a uio). Requests now have two such structures: crp_buf for the input buffer, and crp_obuf for the output buffer. - Consumers now use helper functions (crypto_use_*, e.g. crypto_use_mbuf()) to configure the input buffer. If an output buffer is not configured, the request still modifies the input buffer in-place. A consumer uses a second set of helper functions (crypto_use_output_*) to configure an output buffer. - Consumers must request support for separate output buffers when creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are only permitted to queue a request with a separate output buffer on sessions with this flag set. Existing drivers already reject sessions with unknown flags, so this permits drivers to be modified to support this extension without requiring all drivers to change. - Several data-related functions now have matching versions that operate on an explicit buffer (e.g. crypto_apply_buf, crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf). - Most of the existing data-related functions operate on the input buffer. However crypto_copyback always writes to the output buffer if a request uses a separate output buffer. - For the regions in input/output buffers, the following conventions are followed: - AAD and IV are always present in input only and their fields are offsets into the input buffer. - payload is always present in both buffers. If a request uses a separate output buffer, it must set a new crp_payload_start_output field to the offset of the payload in the output buffer. - digest is in the input buffer for verify operations, and in the output buffer for compute operations. crp_digest_start is relative to the appropriate buffer. - Add a crypto buffer cursor abstraction. This is a more general form of some bits in the cryptosoft driver that tried to always use uio's. However, compared to the original code, this avoids rewalking the uio iovec array for requests with multiple vectors. It also avoids allocate an iovec array for mbufs and populating it by instead walking the mbuf chain directly. - Update the cryptosoft(4) driver to support separate output buffers making use of the cursor abstraction. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D24545
2020-05-25 22:12:04 +00:00
return ((char *)cc->cc_iov->iov_base + cc->cc_offset);
default:
__assert_unreachable();
Add support for optional separate output buffers to in-kernel crypto. Some crypto consumers such as GELI and KTLS for file-backed sendfile need to store their output in a separate buffer from the input. Currently these consumers copy the contents of the input buffer into the output buffer and queue an in-place crypto operation on the output buffer. Using a separate output buffer avoids this copy. - Create a new 'struct crypto_buffer' describing a crypto buffer containing a type and type-specific fields. crp_ilen is gone, instead buffers that use a flat kernel buffer have a cb_buf_len field for their length. The length of other buffer types is inferred from the backing store (e.g. uio_resid for a uio). Requests now have two such structures: crp_buf for the input buffer, and crp_obuf for the output buffer. - Consumers now use helper functions (crypto_use_*, e.g. crypto_use_mbuf()) to configure the input buffer. If an output buffer is not configured, the request still modifies the input buffer in-place. A consumer uses a second set of helper functions (crypto_use_output_*) to configure an output buffer. - Consumers must request support for separate output buffers when creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are only permitted to queue a request with a separate output buffer on sessions with this flag set. Existing drivers already reject sessions with unknown flags, so this permits drivers to be modified to support this extension without requiring all drivers to change. - Several data-related functions now have matching versions that operate on an explicit buffer (e.g. crypto_apply_buf, crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf). - Most of the existing data-related functions operate on the input buffer. However crypto_copyback always writes to the output buffer if a request uses a separate output buffer. - For the regions in input/output buffers, the following conventions are followed: - AAD and IV are always present in input only and their fields are offsets into the input buffer. - payload is always present in both buffers. If a request uses a separate output buffer, it must set a new crp_payload_start_output field to the offset of the payload in the output buffer. - digest is in the input buffer for verify operations, and in the output buffer for compute operations. crp_digest_start is relative to the appropriate buffer. - Add a crypto buffer cursor abstraction. This is a more general form of some bits in the cryptosoft driver that tried to always use uio's. However, compared to the original code, this avoids rewalking the uio iovec array for requests with multiple vectors. It also avoids allocate an iovec array for mbufs and populating it by instead walking the mbuf chain directly. - Update the cryptosoft(4) driver to support separate output buffers making use of the cursor abstraction. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D24545
2020-05-25 22:12:04 +00:00
}
}
void
crypto_cursor_copyback(struct crypto_buffer_cursor *cc, int size,
const void *vsrc)
{
size_t remain, todo;
const char *src;
char *dst;
src = vsrc;
switch (cc->cc_type) {
case CRYPTO_BUF_CONTIG:
MPASS(cc->cc_buf_len >= size);
memcpy(cc->cc_buf, src, size);
cc->cc_buf += size;
cc->cc_buf_len -= size;
break;
case CRYPTO_BUF_MBUF:
for (;;) {
/*
* This uses m_copyback() for individual
* mbufs so that cc_mbuf and cc_offset are
* updated.
*/
Add support for optional separate output buffers to in-kernel crypto. Some crypto consumers such as GELI and KTLS for file-backed sendfile need to store their output in a separate buffer from the input. Currently these consumers copy the contents of the input buffer into the output buffer and queue an in-place crypto operation on the output buffer. Using a separate output buffer avoids this copy. - Create a new 'struct crypto_buffer' describing a crypto buffer containing a type and type-specific fields. crp_ilen is gone, instead buffers that use a flat kernel buffer have a cb_buf_len field for their length. The length of other buffer types is inferred from the backing store (e.g. uio_resid for a uio). Requests now have two such structures: crp_buf for the input buffer, and crp_obuf for the output buffer. - Consumers now use helper functions (crypto_use_*, e.g. crypto_use_mbuf()) to configure the input buffer. If an output buffer is not configured, the request still modifies the input buffer in-place. A consumer uses a second set of helper functions (crypto_use_output_*) to configure an output buffer. - Consumers must request support for separate output buffers when creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are only permitted to queue a request with a separate output buffer on sessions with this flag set. Existing drivers already reject sessions with unknown flags, so this permits drivers to be modified to support this extension without requiring all drivers to change. - Several data-related functions now have matching versions that operate on an explicit buffer (e.g. crypto_apply_buf, crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf). - Most of the existing data-related functions operate on the input buffer. However crypto_copyback always writes to the output buffer if a request uses a separate output buffer. - For the regions in input/output buffers, the following conventions are followed: - AAD and IV are always present in input only and their fields are offsets into the input buffer. - payload is always present in both buffers. If a request uses a separate output buffer, it must set a new crp_payload_start_output field to the offset of the payload in the output buffer. - digest is in the input buffer for verify operations, and in the output buffer for compute operations. crp_digest_start is relative to the appropriate buffer. - Add a crypto buffer cursor abstraction. This is a more general form of some bits in the cryptosoft driver that tried to always use uio's. However, compared to the original code, this avoids rewalking the uio iovec array for requests with multiple vectors. It also avoids allocate an iovec array for mbufs and populating it by instead walking the mbuf chain directly. - Update the cryptosoft(4) driver to support separate output buffers making use of the cursor abstraction. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D24545
2020-05-25 22:12:04 +00:00
remain = cc->cc_mbuf->m_len - cc->cc_offset;
todo = MIN(remain, size);
m_copyback(cc->cc_mbuf, cc->cc_offset, todo, src);
src += todo;
Add support for optional separate output buffers to in-kernel crypto. Some crypto consumers such as GELI and KTLS for file-backed sendfile need to store their output in a separate buffer from the input. Currently these consumers copy the contents of the input buffer into the output buffer and queue an in-place crypto operation on the output buffer. Using a separate output buffer avoids this copy. - Create a new 'struct crypto_buffer' describing a crypto buffer containing a type and type-specific fields. crp_ilen is gone, instead buffers that use a flat kernel buffer have a cb_buf_len field for their length. The length of other buffer types is inferred from the backing store (e.g. uio_resid for a uio). Requests now have two such structures: crp_buf for the input buffer, and crp_obuf for the output buffer. - Consumers now use helper functions (crypto_use_*, e.g. crypto_use_mbuf()) to configure the input buffer. If an output buffer is not configured, the request still modifies the input buffer in-place. A consumer uses a second set of helper functions (crypto_use_output_*) to configure an output buffer. - Consumers must request support for separate output buffers when creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are only permitted to queue a request with a separate output buffer on sessions with this flag set. Existing drivers already reject sessions with unknown flags, so this permits drivers to be modified to support this extension without requiring all drivers to change. - Several data-related functions now have matching versions that operate on an explicit buffer (e.g. crypto_apply_buf, crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf). - Most of the existing data-related functions operate on the input buffer. However crypto_copyback always writes to the output buffer if a request uses a separate output buffer. - For the regions in input/output buffers, the following conventions are followed: - AAD and IV are always present in input only and their fields are offsets into the input buffer. - payload is always present in both buffers. If a request uses a separate output buffer, it must set a new crp_payload_start_output field to the offset of the payload in the output buffer. - digest is in the input buffer for verify operations, and in the output buffer for compute operations. crp_digest_start is relative to the appropriate buffer. - Add a crypto buffer cursor abstraction. This is a more general form of some bits in the cryptosoft driver that tried to always use uio's. However, compared to the original code, this avoids rewalking the uio iovec array for requests with multiple vectors. It also avoids allocate an iovec array for mbufs and populating it by instead walking the mbuf chain directly. - Update the cryptosoft(4) driver to support separate output buffers making use of the cursor abstraction. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D24545
2020-05-25 22:12:04 +00:00
if (todo < remain) {
cc->cc_offset += todo;
break;
}
size -= todo;
cc->cc_mbuf = cc->cc_mbuf->m_next;
cc->cc_offset = 0;
if (size == 0)
break;
}
break;
case CRYPTO_BUF_SINGLE_MBUF:
MPASS(cc->cc_mbuf->m_len >= cc->cc_offset + size);
m_copyback(cc->cc_mbuf, cc->cc_offset, size, src);
cc->cc_offset += size;
break;
case CRYPTO_BUF_VMPAGE:
for (;;) {
dst = (char *)PHYS_TO_DMAP(VM_PAGE_TO_PHYS(
*cc->cc_vmpage)) + cc->cc_offset;
remain = MIN(PAGE_SIZE - cc->cc_offset, cc->cc_buf_len);
todo = MIN(remain, size);
memcpy(dst, src, todo);
src += todo;
cc->cc_buf_len -= todo;
if (todo < remain) {
cc->cc_offset += todo;
break;
}
size -= todo;
cc->cc_vmpage++;
cc->cc_offset = 0;
if (size == 0)
break;
}
break;
Add support for optional separate output buffers to in-kernel crypto. Some crypto consumers such as GELI and KTLS for file-backed sendfile need to store their output in a separate buffer from the input. Currently these consumers copy the contents of the input buffer into the output buffer and queue an in-place crypto operation on the output buffer. Using a separate output buffer avoids this copy. - Create a new 'struct crypto_buffer' describing a crypto buffer containing a type and type-specific fields. crp_ilen is gone, instead buffers that use a flat kernel buffer have a cb_buf_len field for their length. The length of other buffer types is inferred from the backing store (e.g. uio_resid for a uio). Requests now have two such structures: crp_buf for the input buffer, and crp_obuf for the output buffer. - Consumers now use helper functions (crypto_use_*, e.g. crypto_use_mbuf()) to configure the input buffer. If an output buffer is not configured, the request still modifies the input buffer in-place. A consumer uses a second set of helper functions (crypto_use_output_*) to configure an output buffer. - Consumers must request support for separate output buffers when creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are only permitted to queue a request with a separate output buffer on sessions with this flag set. Existing drivers already reject sessions with unknown flags, so this permits drivers to be modified to support this extension without requiring all drivers to change. - Several data-related functions now have matching versions that operate on an explicit buffer (e.g. crypto_apply_buf, crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf). - Most of the existing data-related functions operate on the input buffer. However crypto_copyback always writes to the output buffer if a request uses a separate output buffer. - For the regions in input/output buffers, the following conventions are followed: - AAD and IV are always present in input only and their fields are offsets into the input buffer. - payload is always present in both buffers. If a request uses a separate output buffer, it must set a new crp_payload_start_output field to the offset of the payload in the output buffer. - digest is in the input buffer for verify operations, and in the output buffer for compute operations. crp_digest_start is relative to the appropriate buffer. - Add a crypto buffer cursor abstraction. This is a more general form of some bits in the cryptosoft driver that tried to always use uio's. However, compared to the original code, this avoids rewalking the uio iovec array for requests with multiple vectors. It also avoids allocate an iovec array for mbufs and populating it by instead walking the mbuf chain directly. - Update the cryptosoft(4) driver to support separate output buffers making use of the cursor abstraction. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D24545
2020-05-25 22:12:04 +00:00
case CRYPTO_BUF_UIO:
for (;;) {
dst = (char *)cc->cc_iov->iov_base + cc->cc_offset;
remain = cc->cc_iov->iov_len - cc->cc_offset;
todo = MIN(remain, size);
memcpy(dst, src, todo);
src += todo;
cc->cc_buf_len -= todo;
Add support for optional separate output buffers to in-kernel crypto. Some crypto consumers such as GELI and KTLS for file-backed sendfile need to store their output in a separate buffer from the input. Currently these consumers copy the contents of the input buffer into the output buffer and queue an in-place crypto operation on the output buffer. Using a separate output buffer avoids this copy. - Create a new 'struct crypto_buffer' describing a crypto buffer containing a type and type-specific fields. crp_ilen is gone, instead buffers that use a flat kernel buffer have a cb_buf_len field for their length. The length of other buffer types is inferred from the backing store (e.g. uio_resid for a uio). Requests now have two such structures: crp_buf for the input buffer, and crp_obuf for the output buffer. - Consumers now use helper functions (crypto_use_*, e.g. crypto_use_mbuf()) to configure the input buffer. If an output buffer is not configured, the request still modifies the input buffer in-place. A consumer uses a second set of helper functions (crypto_use_output_*) to configure an output buffer. - Consumers must request support for separate output buffers when creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are only permitted to queue a request with a separate output buffer on sessions with this flag set. Existing drivers already reject sessions with unknown flags, so this permits drivers to be modified to support this extension without requiring all drivers to change. - Several data-related functions now have matching versions that operate on an explicit buffer (e.g. crypto_apply_buf, crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf). - Most of the existing data-related functions operate on the input buffer. However crypto_copyback always writes to the output buffer if a request uses a separate output buffer. - For the regions in input/output buffers, the following conventions are followed: - AAD and IV are always present in input only and their fields are offsets into the input buffer. - payload is always present in both buffers. If a request uses a separate output buffer, it must set a new crp_payload_start_output field to the offset of the payload in the output buffer. - digest is in the input buffer for verify operations, and in the output buffer for compute operations. crp_digest_start is relative to the appropriate buffer. - Add a crypto buffer cursor abstraction. This is a more general form of some bits in the cryptosoft driver that tried to always use uio's. However, compared to the original code, this avoids rewalking the uio iovec array for requests with multiple vectors. It also avoids allocate an iovec array for mbufs and populating it by instead walking the mbuf chain directly. - Update the cryptosoft(4) driver to support separate output buffers making use of the cursor abstraction. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D24545
2020-05-25 22:12:04 +00:00
if (todo < remain) {
cc->cc_offset += todo;
break;
}
size -= todo;
cc->cc_iov++;
cc->cc_offset = 0;
if (size == 0)
break;
}
break;
default:
#ifdef INVARIANTS
panic("%s: invalid buffer type %d", __func__, cc->cc_type);
#endif
break;
}
}
void
crypto_cursor_copydata(struct crypto_buffer_cursor *cc, int size, void *vdst)
{
size_t remain, todo;
const char *src;
char *dst;
dst = vdst;
switch (cc->cc_type) {
case CRYPTO_BUF_CONTIG:
MPASS(cc->cc_buf_len >= size);
memcpy(dst, cc->cc_buf, size);
cc->cc_buf += size;
cc->cc_buf_len -= size;
break;
case CRYPTO_BUF_MBUF:
for (;;) {
/*
* This uses m_copydata() for individual
* mbufs so that cc_mbuf and cc_offset are
* updated.
*/
Add support for optional separate output buffers to in-kernel crypto. Some crypto consumers such as GELI and KTLS for file-backed sendfile need to store their output in a separate buffer from the input. Currently these consumers copy the contents of the input buffer into the output buffer and queue an in-place crypto operation on the output buffer. Using a separate output buffer avoids this copy. - Create a new 'struct crypto_buffer' describing a crypto buffer containing a type and type-specific fields. crp_ilen is gone, instead buffers that use a flat kernel buffer have a cb_buf_len field for their length. The length of other buffer types is inferred from the backing store (e.g. uio_resid for a uio). Requests now have two such structures: crp_buf for the input buffer, and crp_obuf for the output buffer. - Consumers now use helper functions (crypto_use_*, e.g. crypto_use_mbuf()) to configure the input buffer. If an output buffer is not configured, the request still modifies the input buffer in-place. A consumer uses a second set of helper functions (crypto_use_output_*) to configure an output buffer. - Consumers must request support for separate output buffers when creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are only permitted to queue a request with a separate output buffer on sessions with this flag set. Existing drivers already reject sessions with unknown flags, so this permits drivers to be modified to support this extension without requiring all drivers to change. - Several data-related functions now have matching versions that operate on an explicit buffer (e.g. crypto_apply_buf, crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf). - Most of the existing data-related functions operate on the input buffer. However crypto_copyback always writes to the output buffer if a request uses a separate output buffer. - For the regions in input/output buffers, the following conventions are followed: - AAD and IV are always present in input only and their fields are offsets into the input buffer. - payload is always present in both buffers. If a request uses a separate output buffer, it must set a new crp_payload_start_output field to the offset of the payload in the output buffer. - digest is in the input buffer for verify operations, and in the output buffer for compute operations. crp_digest_start is relative to the appropriate buffer. - Add a crypto buffer cursor abstraction. This is a more general form of some bits in the cryptosoft driver that tried to always use uio's. However, compared to the original code, this avoids rewalking the uio iovec array for requests with multiple vectors. It also avoids allocate an iovec array for mbufs and populating it by instead walking the mbuf chain directly. - Update the cryptosoft(4) driver to support separate output buffers making use of the cursor abstraction. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D24545
2020-05-25 22:12:04 +00:00
remain = cc->cc_mbuf->m_len - cc->cc_offset;
todo = MIN(remain, size);
m_copydata(cc->cc_mbuf, cc->cc_offset, todo, dst);
Add support for optional separate output buffers to in-kernel crypto. Some crypto consumers such as GELI and KTLS for file-backed sendfile need to store their output in a separate buffer from the input. Currently these consumers copy the contents of the input buffer into the output buffer and queue an in-place crypto operation on the output buffer. Using a separate output buffer avoids this copy. - Create a new 'struct crypto_buffer' describing a crypto buffer containing a type and type-specific fields. crp_ilen is gone, instead buffers that use a flat kernel buffer have a cb_buf_len field for their length. The length of other buffer types is inferred from the backing store (e.g. uio_resid for a uio). Requests now have two such structures: crp_buf for the input buffer, and crp_obuf for the output buffer. - Consumers now use helper functions (crypto_use_*, e.g. crypto_use_mbuf()) to configure the input buffer. If an output buffer is not configured, the request still modifies the input buffer in-place. A consumer uses a second set of helper functions (crypto_use_output_*) to configure an output buffer. - Consumers must request support for separate output buffers when creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are only permitted to queue a request with a separate output buffer on sessions with this flag set. Existing drivers already reject sessions with unknown flags, so this permits drivers to be modified to support this extension without requiring all drivers to change. - Several data-related functions now have matching versions that operate on an explicit buffer (e.g. crypto_apply_buf, crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf). - Most of the existing data-related functions operate on the input buffer. However crypto_copyback always writes to the output buffer if a request uses a separate output buffer. - For the regions in input/output buffers, the following conventions are followed: - AAD and IV are always present in input only and their fields are offsets into the input buffer. - payload is always present in both buffers. If a request uses a separate output buffer, it must set a new crp_payload_start_output field to the offset of the payload in the output buffer. - digest is in the input buffer for verify operations, and in the output buffer for compute operations. crp_digest_start is relative to the appropriate buffer. - Add a crypto buffer cursor abstraction. This is a more general form of some bits in the cryptosoft driver that tried to always use uio's. However, compared to the original code, this avoids rewalking the uio iovec array for requests with multiple vectors. It also avoids allocate an iovec array for mbufs and populating it by instead walking the mbuf chain directly. - Update the cryptosoft(4) driver to support separate output buffers making use of the cursor abstraction. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D24545
2020-05-25 22:12:04 +00:00
dst += todo;
if (todo < remain) {
cc->cc_offset += todo;
break;
}
size -= todo;
cc->cc_mbuf = cc->cc_mbuf->m_next;
cc->cc_offset = 0;
if (size == 0)
break;
}
break;
case CRYPTO_BUF_SINGLE_MBUF:
MPASS(cc->cc_mbuf->m_len >= cc->cc_offset + size);
m_copydata(cc->cc_mbuf, cc->cc_offset, size, dst);
cc->cc_offset += size;
break;
case CRYPTO_BUF_VMPAGE:
for (;;) {
src = (char *)PHYS_TO_DMAP(VM_PAGE_TO_PHYS(
*cc->cc_vmpage)) + cc->cc_offset;
remain = MIN(PAGE_SIZE - cc->cc_offset, cc->cc_buf_len);
todo = MIN(remain, size);
memcpy(dst, src, todo);
dst += todo;
cc->cc_buf_len -= todo;
if (todo < remain) {
cc->cc_offset += todo;
break;
}
size -= todo;
cc->cc_vmpage++;
cc->cc_offset = 0;
if (size == 0)
break;
}
break;
Add support for optional separate output buffers to in-kernel crypto. Some crypto consumers such as GELI and KTLS for file-backed sendfile need to store their output in a separate buffer from the input. Currently these consumers copy the contents of the input buffer into the output buffer and queue an in-place crypto operation on the output buffer. Using a separate output buffer avoids this copy. - Create a new 'struct crypto_buffer' describing a crypto buffer containing a type and type-specific fields. crp_ilen is gone, instead buffers that use a flat kernel buffer have a cb_buf_len field for their length. The length of other buffer types is inferred from the backing store (e.g. uio_resid for a uio). Requests now have two such structures: crp_buf for the input buffer, and crp_obuf for the output buffer. - Consumers now use helper functions (crypto_use_*, e.g. crypto_use_mbuf()) to configure the input buffer. If an output buffer is not configured, the request still modifies the input buffer in-place. A consumer uses a second set of helper functions (crypto_use_output_*) to configure an output buffer. - Consumers must request support for separate output buffers when creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are only permitted to queue a request with a separate output buffer on sessions with this flag set. Existing drivers already reject sessions with unknown flags, so this permits drivers to be modified to support this extension without requiring all drivers to change. - Several data-related functions now have matching versions that operate on an explicit buffer (e.g. crypto_apply_buf, crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf). - Most of the existing data-related functions operate on the input buffer. However crypto_copyback always writes to the output buffer if a request uses a separate output buffer. - For the regions in input/output buffers, the following conventions are followed: - AAD and IV are always present in input only and their fields are offsets into the input buffer. - payload is always present in both buffers. If a request uses a separate output buffer, it must set a new crp_payload_start_output field to the offset of the payload in the output buffer. - digest is in the input buffer for verify operations, and in the output buffer for compute operations. crp_digest_start is relative to the appropriate buffer. - Add a crypto buffer cursor abstraction. This is a more general form of some bits in the cryptosoft driver that tried to always use uio's. However, compared to the original code, this avoids rewalking the uio iovec array for requests with multiple vectors. It also avoids allocate an iovec array for mbufs and populating it by instead walking the mbuf chain directly. - Update the cryptosoft(4) driver to support separate output buffers making use of the cursor abstraction. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D24545
2020-05-25 22:12:04 +00:00
case CRYPTO_BUF_UIO:
for (;;) {
src = (const char *)cc->cc_iov->iov_base +
cc->cc_offset;
remain = cc->cc_iov->iov_len - cc->cc_offset;
todo = MIN(remain, size);
memcpy(dst, src, todo);
dst += todo;
cc->cc_buf_len -= todo;
Add support for optional separate output buffers to in-kernel crypto. Some crypto consumers such as GELI and KTLS for file-backed sendfile need to store their output in a separate buffer from the input. Currently these consumers copy the contents of the input buffer into the output buffer and queue an in-place crypto operation on the output buffer. Using a separate output buffer avoids this copy. - Create a new 'struct crypto_buffer' describing a crypto buffer containing a type and type-specific fields. crp_ilen is gone, instead buffers that use a flat kernel buffer have a cb_buf_len field for their length. The length of other buffer types is inferred from the backing store (e.g. uio_resid for a uio). Requests now have two such structures: crp_buf for the input buffer, and crp_obuf for the output buffer. - Consumers now use helper functions (crypto_use_*, e.g. crypto_use_mbuf()) to configure the input buffer. If an output buffer is not configured, the request still modifies the input buffer in-place. A consumer uses a second set of helper functions (crypto_use_output_*) to configure an output buffer. - Consumers must request support for separate output buffers when creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are only permitted to queue a request with a separate output buffer on sessions with this flag set. Existing drivers already reject sessions with unknown flags, so this permits drivers to be modified to support this extension without requiring all drivers to change. - Several data-related functions now have matching versions that operate on an explicit buffer (e.g. crypto_apply_buf, crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf). - Most of the existing data-related functions operate on the input buffer. However crypto_copyback always writes to the output buffer if a request uses a separate output buffer. - For the regions in input/output buffers, the following conventions are followed: - AAD and IV are always present in input only and their fields are offsets into the input buffer. - payload is always present in both buffers. If a request uses a separate output buffer, it must set a new crp_payload_start_output field to the offset of the payload in the output buffer. - digest is in the input buffer for verify operations, and in the output buffer for compute operations. crp_digest_start is relative to the appropriate buffer. - Add a crypto buffer cursor abstraction. This is a more general form of some bits in the cryptosoft driver that tried to always use uio's. However, compared to the original code, this avoids rewalking the uio iovec array for requests with multiple vectors. It also avoids allocate an iovec array for mbufs and populating it by instead walking the mbuf chain directly. - Update the cryptosoft(4) driver to support separate output buffers making use of the cursor abstraction. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D24545
2020-05-25 22:12:04 +00:00
if (todo < remain) {
cc->cc_offset += todo;
break;
}
size -= todo;
cc->cc_iov++;
cc->cc_offset = 0;
if (size == 0)
break;
}
break;
default:
#ifdef INVARIANTS
panic("%s: invalid buffer type %d", __func__, cc->cc_type);
#endif
break;
}
}
/*
* To avoid advancing 'cursor', make a local copy that gets advanced
* instead.
*/
void
crypto_cursor_copydata_noadv(struct crypto_buffer_cursor *cc, int size,
void *vdst)
{
struct crypto_buffer_cursor copy;
copy = *cc;
crypto_cursor_copydata(&copy, size, vdst);
}
/*
* Apply function f to the data in an iovec list starting "off" bytes from
* the beginning, continuing for "len" bytes.
*/
Add support for optional separate output buffers to in-kernel crypto. Some crypto consumers such as GELI and KTLS for file-backed sendfile need to store their output in a separate buffer from the input. Currently these consumers copy the contents of the input buffer into the output buffer and queue an in-place crypto operation on the output buffer. Using a separate output buffer avoids this copy. - Create a new 'struct crypto_buffer' describing a crypto buffer containing a type and type-specific fields. crp_ilen is gone, instead buffers that use a flat kernel buffer have a cb_buf_len field for their length. The length of other buffer types is inferred from the backing store (e.g. uio_resid for a uio). Requests now have two such structures: crp_buf for the input buffer, and crp_obuf for the output buffer. - Consumers now use helper functions (crypto_use_*, e.g. crypto_use_mbuf()) to configure the input buffer. If an output buffer is not configured, the request still modifies the input buffer in-place. A consumer uses a second set of helper functions (crypto_use_output_*) to configure an output buffer. - Consumers must request support for separate output buffers when creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are only permitted to queue a request with a separate output buffer on sessions with this flag set. Existing drivers already reject sessions with unknown flags, so this permits drivers to be modified to support this extension without requiring all drivers to change. - Several data-related functions now have matching versions that operate on an explicit buffer (e.g. crypto_apply_buf, crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf). - Most of the existing data-related functions operate on the input buffer. However crypto_copyback always writes to the output buffer if a request uses a separate output buffer. - For the regions in input/output buffers, the following conventions are followed: - AAD and IV are always present in input only and their fields are offsets into the input buffer. - payload is always present in both buffers. If a request uses a separate output buffer, it must set a new crp_payload_start_output field to the offset of the payload in the output buffer. - digest is in the input buffer for verify operations, and in the output buffer for compute operations. crp_digest_start is relative to the appropriate buffer. - Add a crypto buffer cursor abstraction. This is a more general form of some bits in the cryptosoft driver that tried to always use uio's. However, compared to the original code, this avoids rewalking the uio iovec array for requests with multiple vectors. It also avoids allocate an iovec array for mbufs and populating it by instead walking the mbuf chain directly. - Update the cryptosoft(4) driver to support separate output buffers making use of the cursor abstraction. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D24545
2020-05-25 22:12:04 +00:00
static int
cuio_apply(struct uio *uio, int off, int len,
int (*f)(void *, const void *, u_int), void *arg)
{
struct iovec *iov = uio->uio_iov;
int iol __diagused = uio->uio_iovcnt;
unsigned count;
int rval;
CUIO_SKIP();
while (len > 0) {
KASSERT(iol >= 0, ("%s: empty", __func__));
count = min(iov->iov_len - off, len);
rval = (*f)(arg, ((caddr_t)iov->iov_base) + off, count);
if (rval)
return (rval);
len -= count;
off = 0;
iol--;
iov++;
}
return (0);
}
void
Refactor driver and consumer interfaces for OCF (in-kernel crypto). - The linked list of cryptoini structures used in session initialization is replaced with a new flat structure: struct crypto_session_params. This session includes a new mode to define how the other fields should be interpreted. Available modes include: - COMPRESS (for compression/decompression) - CIPHER (for simply encryption/decryption) - DIGEST (computing and verifying digests) - AEAD (combined auth and encryption such as AES-GCM and AES-CCM) - ETA (combined auth and encryption using encrypt-then-authenticate) Additional modes could be added in the future (e.g. if we wanted to support TLS MtE for AES-CBC in the kernel we could add a new mode for that. TLS modes might also affect how AAD is interpreted, etc.) The flat structure also includes the key lengths and algorithms as before. However, code doesn't have to walk the linked list and switch on the algorithm to determine which key is the auth key vs encryption key. The 'csp_auth_*' fields are always used for auth keys and settings and 'csp_cipher_*' for cipher. (Compression algorithms are stored in csp_cipher_alg.) - Drivers no longer register a list of supported algorithms. This doesn't quite work when you factor in modes (e.g. a driver might support both AES-CBC and SHA2-256-HMAC separately but not combined for ETA). Instead, a new 'crypto_probesession' method has been added to the kobj interface for symmteric crypto drivers. This method returns a negative value on success (similar to how device_probe works) and the crypto framework uses this value to pick the "best" driver. There are three constants for hardware (e.g. ccr), accelerated software (e.g. aesni), and plain software (cryptosoft) that give preference in that order. One effect of this is that if you request only hardware when creating a new session, you will no longer get a session using accelerated software. Another effect is that the default setting to disallow software crypto via /dev/crypto now disables accelerated software. Once a driver is chosen, 'crypto_newsession' is invoked as before. - Crypto operations are now solely described by the flat 'cryptop' structure. The linked list of descriptors has been removed. A separate enum has been added to describe the type of data buffer in use instead of using CRYPTO_F_* flags to make it easier to add more types in the future if needed (e.g. wired userspace buffers for zero-copy). It will also make it easier to re-introduce separate input and output buffers (in-kernel TLS would benefit from this). Try to make the flags related to IV handling less insane: - CRYPTO_F_IV_SEPARATE means that the IV is stored in the 'crp_iv' member of the operation structure. If this flag is not set, the IV is stored in the data buffer at the 'crp_iv_start' offset. - CRYPTO_F_IV_GENERATE means that a random IV should be generated and stored into the data buffer. This cannot be used with CRYPTO_F_IV_SEPARATE. If a consumer wants to deal with explicit vs implicit IVs, etc. it can always generate the IV however it needs and store partial IVs in the buffer and the full IV/nonce in crp_iv and set CRYPTO_F_IV_SEPARATE. The layout of the buffer is now described via fields in cryptop. crp_aad_start and crp_aad_length define the boundaries of any AAD. Previously with GCM and CCM you defined an auth crd with this range, but for ETA your auth crd had to span both the AAD and plaintext (and they had to be adjacent). crp_payload_start and crp_payload_length define the boundaries of the plaintext/ciphertext. Modes that only do a single operation (COMPRESS, CIPHER, DIGEST) should only use this region and leave the AAD region empty. If a digest is present (or should be generated), it's starting location is marked by crp_digest_start. Instead of using the CRD_F_ENCRYPT flag to determine the direction of the operation, cryptop now includes an 'op' field defining the operation to perform. For digests I've added a new VERIFY digest mode which assumes a digest is present in the input and fails the request with EBADMSG if it doesn't match the internally-computed digest. GCM and CCM already assumed this, and the new AEAD mode requires this for decryption. The new ETA mode now also requires this for decryption, so IPsec and GELI no longer do their own authentication verification. Simple DIGEST operations can also do this, though there are no in-tree consumers. To eventually support some refcounting to close races, the session cookie is now passed to crypto_getop() and clients should no longer set crp_sesssion directly. - Assymteric crypto operation structures should be allocated via crypto_getkreq() and freed via crypto_freekreq(). This permits the crypto layer to track open asym requests and close races with a driver trying to unregister while asym requests are in flight. - crypto_copyback, crypto_copydata, crypto_apply, and crypto_contiguous_subsegment now accept the 'crp' object as the first parameter instead of individual members. This makes it easier to deal with different buffer types in the future as well as separate input and output buffers. It's also simpler for driver writers to use. - bus_dmamap_load_crp() loads a DMA mapping for a crypto buffer. This understands the various types of buffers so that drivers that use DMA do not have to be aware of different buffer types. - Helper routines now exist to build an auth context for HMAC IPAD and OPAD. This reduces some duplicated work among drivers. - Key buffers are now treated as const throughout the framework and in device drivers. However, session key buffers provided when a session is created are expected to remain alive for the duration of the session. - GCM and CCM sessions now only specify a cipher algorithm and a cipher key. The redundant auth information is not needed or used. - For cryptosoft, split up the code a bit such that the 'process' callback now invokes a function pointer in the session. This function pointer is set based on the mode (in effect) though it simplifies a few edge cases that would otherwise be in the switch in 'process'. It does split up GCM vs CCM which I think is more readable even if there is some duplication. - I changed /dev/crypto to support GMAC requests using CRYPTO_AES_NIST_GMAC as an auth algorithm and updated cryptocheck to work with it. - Combined cipher and auth sessions via /dev/crypto now always use ETA mode. The COP_F_CIPHER_FIRST flag is now a no-op that is ignored. This was actually documented as being true in crypto(4) before, but the code had not implemented this before I added the CIPHER_FIRST flag. - I have not yet updated /dev/crypto to be aware of explicit modes for sessions. I will probably do that at some point in the future as well as teach it about IV/nonce and tag lengths for AEAD so we can support all of the NIST KAT tests for GCM and CCM. - I've split up the exising crypto.9 manpage into several pages of which many are written from scratch. - I have converted all drivers and consumers in the tree and verified that they compile, but I have not tested all of them. I have tested the following drivers: - cryptosoft - aesni (AES only) - blake2 - ccr and the following consumers: - cryptodev - IPsec - ktls_ocf - GELI (lightly) I have not tested the following: - ccp - aesni with sha - hifn - kgssapi_krb5 - ubsec - padlock - safe - armv8_crypto (aarch64) - glxsb (i386) - sec (ppc) - cesa (armv7) - cryptocteon (mips64) - nlmsec (mips64) Discussed with: cem Relnotes: yes Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D23677
2020-03-27 18:25:23 +00:00
crypto_copyback(struct cryptop *crp, int off, int size, const void *src)
{
Add support for optional separate output buffers to in-kernel crypto. Some crypto consumers such as GELI and KTLS for file-backed sendfile need to store their output in a separate buffer from the input. Currently these consumers copy the contents of the input buffer into the output buffer and queue an in-place crypto operation on the output buffer. Using a separate output buffer avoids this copy. - Create a new 'struct crypto_buffer' describing a crypto buffer containing a type and type-specific fields. crp_ilen is gone, instead buffers that use a flat kernel buffer have a cb_buf_len field for their length. The length of other buffer types is inferred from the backing store (e.g. uio_resid for a uio). Requests now have two such structures: crp_buf for the input buffer, and crp_obuf for the output buffer. - Consumers now use helper functions (crypto_use_*, e.g. crypto_use_mbuf()) to configure the input buffer. If an output buffer is not configured, the request still modifies the input buffer in-place. A consumer uses a second set of helper functions (crypto_use_output_*) to configure an output buffer. - Consumers must request support for separate output buffers when creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are only permitted to queue a request with a separate output buffer on sessions with this flag set. Existing drivers already reject sessions with unknown flags, so this permits drivers to be modified to support this extension without requiring all drivers to change. - Several data-related functions now have matching versions that operate on an explicit buffer (e.g. crypto_apply_buf, crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf). - Most of the existing data-related functions operate on the input buffer. However crypto_copyback always writes to the output buffer if a request uses a separate output buffer. - For the regions in input/output buffers, the following conventions are followed: - AAD and IV are always present in input only and their fields are offsets into the input buffer. - payload is always present in both buffers. If a request uses a separate output buffer, it must set a new crp_payload_start_output field to the offset of the payload in the output buffer. - digest is in the input buffer for verify operations, and in the output buffer for compute operations. crp_digest_start is relative to the appropriate buffer. - Add a crypto buffer cursor abstraction. This is a more general form of some bits in the cryptosoft driver that tried to always use uio's. However, compared to the original code, this avoids rewalking the uio iovec array for requests with multiple vectors. It also avoids allocate an iovec array for mbufs and populating it by instead walking the mbuf chain directly. - Update the cryptosoft(4) driver to support separate output buffers making use of the cursor abstraction. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D24545
2020-05-25 22:12:04 +00:00
struct crypto_buffer *cb;
Add support for optional separate output buffers to in-kernel crypto. Some crypto consumers such as GELI and KTLS for file-backed sendfile need to store their output in a separate buffer from the input. Currently these consumers copy the contents of the input buffer into the output buffer and queue an in-place crypto operation on the output buffer. Using a separate output buffer avoids this copy. - Create a new 'struct crypto_buffer' describing a crypto buffer containing a type and type-specific fields. crp_ilen is gone, instead buffers that use a flat kernel buffer have a cb_buf_len field for their length. The length of other buffer types is inferred from the backing store (e.g. uio_resid for a uio). Requests now have two such structures: crp_buf for the input buffer, and crp_obuf for the output buffer. - Consumers now use helper functions (crypto_use_*, e.g. crypto_use_mbuf()) to configure the input buffer. If an output buffer is not configured, the request still modifies the input buffer in-place. A consumer uses a second set of helper functions (crypto_use_output_*) to configure an output buffer. - Consumers must request support for separate output buffers when creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are only permitted to queue a request with a separate output buffer on sessions with this flag set. Existing drivers already reject sessions with unknown flags, so this permits drivers to be modified to support this extension without requiring all drivers to change. - Several data-related functions now have matching versions that operate on an explicit buffer (e.g. crypto_apply_buf, crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf). - Most of the existing data-related functions operate on the input buffer. However crypto_copyback always writes to the output buffer if a request uses a separate output buffer. - For the regions in input/output buffers, the following conventions are followed: - AAD and IV are always present in input only and their fields are offsets into the input buffer. - payload is always present in both buffers. If a request uses a separate output buffer, it must set a new crp_payload_start_output field to the offset of the payload in the output buffer. - digest is in the input buffer for verify operations, and in the output buffer for compute operations. crp_digest_start is relative to the appropriate buffer. - Add a crypto buffer cursor abstraction. This is a more general form of some bits in the cryptosoft driver that tried to always use uio's. However, compared to the original code, this avoids rewalking the uio iovec array for requests with multiple vectors. It also avoids allocate an iovec array for mbufs and populating it by instead walking the mbuf chain directly. - Update the cryptosoft(4) driver to support separate output buffers making use of the cursor abstraction. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D24545
2020-05-25 22:12:04 +00:00
if (crp->crp_obuf.cb_type != CRYPTO_BUF_NONE)
cb = &crp->crp_obuf;
else
cb = &crp->crp_buf;
switch (cb->cb_type) {
Refactor driver and consumer interfaces for OCF (in-kernel crypto). - The linked list of cryptoini structures used in session initialization is replaced with a new flat structure: struct crypto_session_params. This session includes a new mode to define how the other fields should be interpreted. Available modes include: - COMPRESS (for compression/decompression) - CIPHER (for simply encryption/decryption) - DIGEST (computing and verifying digests) - AEAD (combined auth and encryption such as AES-GCM and AES-CCM) - ETA (combined auth and encryption using encrypt-then-authenticate) Additional modes could be added in the future (e.g. if we wanted to support TLS MtE for AES-CBC in the kernel we could add a new mode for that. TLS modes might also affect how AAD is interpreted, etc.) The flat structure also includes the key lengths and algorithms as before. However, code doesn't have to walk the linked list and switch on the algorithm to determine which key is the auth key vs encryption key. The 'csp_auth_*' fields are always used for auth keys and settings and 'csp_cipher_*' for cipher. (Compression algorithms are stored in csp_cipher_alg.) - Drivers no longer register a list of supported algorithms. This doesn't quite work when you factor in modes (e.g. a driver might support both AES-CBC and SHA2-256-HMAC separately but not combined for ETA). Instead, a new 'crypto_probesession' method has been added to the kobj interface for symmteric crypto drivers. This method returns a negative value on success (similar to how device_probe works) and the crypto framework uses this value to pick the "best" driver. There are three constants for hardware (e.g. ccr), accelerated software (e.g. aesni), and plain software (cryptosoft) that give preference in that order. One effect of this is that if you request only hardware when creating a new session, you will no longer get a session using accelerated software. Another effect is that the default setting to disallow software crypto via /dev/crypto now disables accelerated software. Once a driver is chosen, 'crypto_newsession' is invoked as before. - Crypto operations are now solely described by the flat 'cryptop' structure. The linked list of descriptors has been removed. A separate enum has been added to describe the type of data buffer in use instead of using CRYPTO_F_* flags to make it easier to add more types in the future if needed (e.g. wired userspace buffers for zero-copy). It will also make it easier to re-introduce separate input and output buffers (in-kernel TLS would benefit from this). Try to make the flags related to IV handling less insane: - CRYPTO_F_IV_SEPARATE means that the IV is stored in the 'crp_iv' member of the operation structure. If this flag is not set, the IV is stored in the data buffer at the 'crp_iv_start' offset. - CRYPTO_F_IV_GENERATE means that a random IV should be generated and stored into the data buffer. This cannot be used with CRYPTO_F_IV_SEPARATE. If a consumer wants to deal with explicit vs implicit IVs, etc. it can always generate the IV however it needs and store partial IVs in the buffer and the full IV/nonce in crp_iv and set CRYPTO_F_IV_SEPARATE. The layout of the buffer is now described via fields in cryptop. crp_aad_start and crp_aad_length define the boundaries of any AAD. Previously with GCM and CCM you defined an auth crd with this range, but for ETA your auth crd had to span both the AAD and plaintext (and they had to be adjacent). crp_payload_start and crp_payload_length define the boundaries of the plaintext/ciphertext. Modes that only do a single operation (COMPRESS, CIPHER, DIGEST) should only use this region and leave the AAD region empty. If a digest is present (or should be generated), it's starting location is marked by crp_digest_start. Instead of using the CRD_F_ENCRYPT flag to determine the direction of the operation, cryptop now includes an 'op' field defining the operation to perform. For digests I've added a new VERIFY digest mode which assumes a digest is present in the input and fails the request with EBADMSG if it doesn't match the internally-computed digest. GCM and CCM already assumed this, and the new AEAD mode requires this for decryption. The new ETA mode now also requires this for decryption, so IPsec and GELI no longer do their own authentication verification. Simple DIGEST operations can also do this, though there are no in-tree consumers. To eventually support some refcounting to close races, the session cookie is now passed to crypto_getop() and clients should no longer set crp_sesssion directly. - Assymteric crypto operation structures should be allocated via crypto_getkreq() and freed via crypto_freekreq(). This permits the crypto layer to track open asym requests and close races with a driver trying to unregister while asym requests are in flight. - crypto_copyback, crypto_copydata, crypto_apply, and crypto_contiguous_subsegment now accept the 'crp' object as the first parameter instead of individual members. This makes it easier to deal with different buffer types in the future as well as separate input and output buffers. It's also simpler for driver writers to use. - bus_dmamap_load_crp() loads a DMA mapping for a crypto buffer. This understands the various types of buffers so that drivers that use DMA do not have to be aware of different buffer types. - Helper routines now exist to build an auth context for HMAC IPAD and OPAD. This reduces some duplicated work among drivers. - Key buffers are now treated as const throughout the framework and in device drivers. However, session key buffers provided when a session is created are expected to remain alive for the duration of the session. - GCM and CCM sessions now only specify a cipher algorithm and a cipher key. The redundant auth information is not needed or used. - For cryptosoft, split up the code a bit such that the 'process' callback now invokes a function pointer in the session. This function pointer is set based on the mode (in effect) though it simplifies a few edge cases that would otherwise be in the switch in 'process'. It does split up GCM vs CCM which I think is more readable even if there is some duplication. - I changed /dev/crypto to support GMAC requests using CRYPTO_AES_NIST_GMAC as an auth algorithm and updated cryptocheck to work with it. - Combined cipher and auth sessions via /dev/crypto now always use ETA mode. The COP_F_CIPHER_FIRST flag is now a no-op that is ignored. This was actually documented as being true in crypto(4) before, but the code had not implemented this before I added the CIPHER_FIRST flag. - I have not yet updated /dev/crypto to be aware of explicit modes for sessions. I will probably do that at some point in the future as well as teach it about IV/nonce and tag lengths for AEAD so we can support all of the NIST KAT tests for GCM and CCM. - I've split up the exising crypto.9 manpage into several pages of which many are written from scratch. - I have converted all drivers and consumers in the tree and verified that they compile, but I have not tested all of them. I have tested the following drivers: - cryptosoft - aesni (AES only) - blake2 - ccr and the following consumers: - cryptodev - IPsec - ktls_ocf - GELI (lightly) I have not tested the following: - ccp - aesni with sha - hifn - kgssapi_krb5 - ubsec - padlock - safe - armv8_crypto (aarch64) - glxsb (i386) - sec (ppc) - cesa (armv7) - cryptocteon (mips64) - nlmsec (mips64) Discussed with: cem Relnotes: yes Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D23677
2020-03-27 18:25:23 +00:00
case CRYPTO_BUF_MBUF:
case CRYPTO_BUF_SINGLE_MBUF:
Add support for optional separate output buffers to in-kernel crypto. Some crypto consumers such as GELI and KTLS for file-backed sendfile need to store their output in a separate buffer from the input. Currently these consumers copy the contents of the input buffer into the output buffer and queue an in-place crypto operation on the output buffer. Using a separate output buffer avoids this copy. - Create a new 'struct crypto_buffer' describing a crypto buffer containing a type and type-specific fields. crp_ilen is gone, instead buffers that use a flat kernel buffer have a cb_buf_len field for their length. The length of other buffer types is inferred from the backing store (e.g. uio_resid for a uio). Requests now have two such structures: crp_buf for the input buffer, and crp_obuf for the output buffer. - Consumers now use helper functions (crypto_use_*, e.g. crypto_use_mbuf()) to configure the input buffer. If an output buffer is not configured, the request still modifies the input buffer in-place. A consumer uses a second set of helper functions (crypto_use_output_*) to configure an output buffer. - Consumers must request support for separate output buffers when creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are only permitted to queue a request with a separate output buffer on sessions with this flag set. Existing drivers already reject sessions with unknown flags, so this permits drivers to be modified to support this extension without requiring all drivers to change. - Several data-related functions now have matching versions that operate on an explicit buffer (e.g. crypto_apply_buf, crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf). - Most of the existing data-related functions operate on the input buffer. However crypto_copyback always writes to the output buffer if a request uses a separate output buffer. - For the regions in input/output buffers, the following conventions are followed: - AAD and IV are always present in input only and their fields are offsets into the input buffer. - payload is always present in both buffers. If a request uses a separate output buffer, it must set a new crp_payload_start_output field to the offset of the payload in the output buffer. - digest is in the input buffer for verify operations, and in the output buffer for compute operations. crp_digest_start is relative to the appropriate buffer. - Add a crypto buffer cursor abstraction. This is a more general form of some bits in the cryptosoft driver that tried to always use uio's. However, compared to the original code, this avoids rewalking the uio iovec array for requests with multiple vectors. It also avoids allocate an iovec array for mbufs and populating it by instead walking the mbuf chain directly. - Update the cryptosoft(4) driver to support separate output buffers making use of the cursor abstraction. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D24545
2020-05-25 22:12:04 +00:00
m_copyback(cb->cb_mbuf, off, size, src);
Refactor driver and consumer interfaces for OCF (in-kernel crypto). - The linked list of cryptoini structures used in session initialization is replaced with a new flat structure: struct crypto_session_params. This session includes a new mode to define how the other fields should be interpreted. Available modes include: - COMPRESS (for compression/decompression) - CIPHER (for simply encryption/decryption) - DIGEST (computing and verifying digests) - AEAD (combined auth and encryption such as AES-GCM and AES-CCM) - ETA (combined auth and encryption using encrypt-then-authenticate) Additional modes could be added in the future (e.g. if we wanted to support TLS MtE for AES-CBC in the kernel we could add a new mode for that. TLS modes might also affect how AAD is interpreted, etc.) The flat structure also includes the key lengths and algorithms as before. However, code doesn't have to walk the linked list and switch on the algorithm to determine which key is the auth key vs encryption key. The 'csp_auth_*' fields are always used for auth keys and settings and 'csp_cipher_*' for cipher. (Compression algorithms are stored in csp_cipher_alg.) - Drivers no longer register a list of supported algorithms. This doesn't quite work when you factor in modes (e.g. a driver might support both AES-CBC and SHA2-256-HMAC separately but not combined for ETA). Instead, a new 'crypto_probesession' method has been added to the kobj interface for symmteric crypto drivers. This method returns a negative value on success (similar to how device_probe works) and the crypto framework uses this value to pick the "best" driver. There are three constants for hardware (e.g. ccr), accelerated software (e.g. aesni), and plain software (cryptosoft) that give preference in that order. One effect of this is that if you request only hardware when creating a new session, you will no longer get a session using accelerated software. Another effect is that the default setting to disallow software crypto via /dev/crypto now disables accelerated software. Once a driver is chosen, 'crypto_newsession' is invoked as before. - Crypto operations are now solely described by the flat 'cryptop' structure. The linked list of descriptors has been removed. A separate enum has been added to describe the type of data buffer in use instead of using CRYPTO_F_* flags to make it easier to add more types in the future if needed (e.g. wired userspace buffers for zero-copy). It will also make it easier to re-introduce separate input and output buffers (in-kernel TLS would benefit from this). Try to make the flags related to IV handling less insane: - CRYPTO_F_IV_SEPARATE means that the IV is stored in the 'crp_iv' member of the operation structure. If this flag is not set, the IV is stored in the data buffer at the 'crp_iv_start' offset. - CRYPTO_F_IV_GENERATE means that a random IV should be generated and stored into the data buffer. This cannot be used with CRYPTO_F_IV_SEPARATE. If a consumer wants to deal with explicit vs implicit IVs, etc. it can always generate the IV however it needs and store partial IVs in the buffer and the full IV/nonce in crp_iv and set CRYPTO_F_IV_SEPARATE. The layout of the buffer is now described via fields in cryptop. crp_aad_start and crp_aad_length define the boundaries of any AAD. Previously with GCM and CCM you defined an auth crd with this range, but for ETA your auth crd had to span both the AAD and plaintext (and they had to be adjacent). crp_payload_start and crp_payload_length define the boundaries of the plaintext/ciphertext. Modes that only do a single operation (COMPRESS, CIPHER, DIGEST) should only use this region and leave the AAD region empty. If a digest is present (or should be generated), it's starting location is marked by crp_digest_start. Instead of using the CRD_F_ENCRYPT flag to determine the direction of the operation, cryptop now includes an 'op' field defining the operation to perform. For digests I've added a new VERIFY digest mode which assumes a digest is present in the input and fails the request with EBADMSG if it doesn't match the internally-computed digest. GCM and CCM already assumed this, and the new AEAD mode requires this for decryption. The new ETA mode now also requires this for decryption, so IPsec and GELI no longer do their own authentication verification. Simple DIGEST operations can also do this, though there are no in-tree consumers. To eventually support some refcounting to close races, the session cookie is now passed to crypto_getop() and clients should no longer set crp_sesssion directly. - Assymteric crypto operation structures should be allocated via crypto_getkreq() and freed via crypto_freekreq(). This permits the crypto layer to track open asym requests and close races with a driver trying to unregister while asym requests are in flight. - crypto_copyback, crypto_copydata, crypto_apply, and crypto_contiguous_subsegment now accept the 'crp' object as the first parameter instead of individual members. This makes it easier to deal with different buffer types in the future as well as separate input and output buffers. It's also simpler for driver writers to use. - bus_dmamap_load_crp() loads a DMA mapping for a crypto buffer. This understands the various types of buffers so that drivers that use DMA do not have to be aware of different buffer types. - Helper routines now exist to build an auth context for HMAC IPAD and OPAD. This reduces some duplicated work among drivers. - Key buffers are now treated as const throughout the framework and in device drivers. However, session key buffers provided when a session is created are expected to remain alive for the duration of the session. - GCM and CCM sessions now only specify a cipher algorithm and a cipher key. The redundant auth information is not needed or used. - For cryptosoft, split up the code a bit such that the 'process' callback now invokes a function pointer in the session. This function pointer is set based on the mode (in effect) though it simplifies a few edge cases that would otherwise be in the switch in 'process'. It does split up GCM vs CCM which I think is more readable even if there is some duplication. - I changed /dev/crypto to support GMAC requests using CRYPTO_AES_NIST_GMAC as an auth algorithm and updated cryptocheck to work with it. - Combined cipher and auth sessions via /dev/crypto now always use ETA mode. The COP_F_CIPHER_FIRST flag is now a no-op that is ignored. This was actually documented as being true in crypto(4) before, but the code had not implemented this before I added the CIPHER_FIRST flag. - I have not yet updated /dev/crypto to be aware of explicit modes for sessions. I will probably do that at some point in the future as well as teach it about IV/nonce and tag lengths for AEAD so we can support all of the NIST KAT tests for GCM and CCM. - I've split up the exising crypto.9 manpage into several pages of which many are written from scratch. - I have converted all drivers and consumers in the tree and verified that they compile, but I have not tested all of them. I have tested the following drivers: - cryptosoft - aesni (AES only) - blake2 - ccr and the following consumers: - cryptodev - IPsec - ktls_ocf - GELI (lightly) I have not tested the following: - ccp - aesni with sha - hifn - kgssapi_krb5 - ubsec - padlock - safe - armv8_crypto (aarch64) - glxsb (i386) - sec (ppc) - cesa (armv7) - cryptocteon (mips64) - nlmsec (mips64) Discussed with: cem Relnotes: yes Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D23677
2020-03-27 18:25:23 +00:00
break;
#if CRYPTO_MAY_HAVE_VMPAGE
case CRYPTO_BUF_VMPAGE:
MPASS(size <= cb->cb_vm_page_len);
MPASS(size + off <=
cb->cb_vm_page_len + cb->cb_vm_page_offset);
cvm_page_copyback(cb->cb_vm_page,
off + cb->cb_vm_page_offset, size, src);
break;
#endif /* CRYPTO_MAY_HAVE_VMPAGE */
Refactor driver and consumer interfaces for OCF (in-kernel crypto). - The linked list of cryptoini structures used in session initialization is replaced with a new flat structure: struct crypto_session_params. This session includes a new mode to define how the other fields should be interpreted. Available modes include: - COMPRESS (for compression/decompression) - CIPHER (for simply encryption/decryption) - DIGEST (computing and verifying digests) - AEAD (combined auth and encryption such as AES-GCM and AES-CCM) - ETA (combined auth and encryption using encrypt-then-authenticate) Additional modes could be added in the future (e.g. if we wanted to support TLS MtE for AES-CBC in the kernel we could add a new mode for that. TLS modes might also affect how AAD is interpreted, etc.) The flat structure also includes the key lengths and algorithms as before. However, code doesn't have to walk the linked list and switch on the algorithm to determine which key is the auth key vs encryption key. The 'csp_auth_*' fields are always used for auth keys and settings and 'csp_cipher_*' for cipher. (Compression algorithms are stored in csp_cipher_alg.) - Drivers no longer register a list of supported algorithms. This doesn't quite work when you factor in modes (e.g. a driver might support both AES-CBC and SHA2-256-HMAC separately but not combined for ETA). Instead, a new 'crypto_probesession' method has been added to the kobj interface for symmteric crypto drivers. This method returns a negative value on success (similar to how device_probe works) and the crypto framework uses this value to pick the "best" driver. There are three constants for hardware (e.g. ccr), accelerated software (e.g. aesni), and plain software (cryptosoft) that give preference in that order. One effect of this is that if you request only hardware when creating a new session, you will no longer get a session using accelerated software. Another effect is that the default setting to disallow software crypto via /dev/crypto now disables accelerated software. Once a driver is chosen, 'crypto_newsession' is invoked as before. - Crypto operations are now solely described by the flat 'cryptop' structure. The linked list of descriptors has been removed. A separate enum has been added to describe the type of data buffer in use instead of using CRYPTO_F_* flags to make it easier to add more types in the future if needed (e.g. wired userspace buffers for zero-copy). It will also make it easier to re-introduce separate input and output buffers (in-kernel TLS would benefit from this). Try to make the flags related to IV handling less insane: - CRYPTO_F_IV_SEPARATE means that the IV is stored in the 'crp_iv' member of the operation structure. If this flag is not set, the IV is stored in the data buffer at the 'crp_iv_start' offset. - CRYPTO_F_IV_GENERATE means that a random IV should be generated and stored into the data buffer. This cannot be used with CRYPTO_F_IV_SEPARATE. If a consumer wants to deal with explicit vs implicit IVs, etc. it can always generate the IV however it needs and store partial IVs in the buffer and the full IV/nonce in crp_iv and set CRYPTO_F_IV_SEPARATE. The layout of the buffer is now described via fields in cryptop. crp_aad_start and crp_aad_length define the boundaries of any AAD. Previously with GCM and CCM you defined an auth crd with this range, but for ETA your auth crd had to span both the AAD and plaintext (and they had to be adjacent). crp_payload_start and crp_payload_length define the boundaries of the plaintext/ciphertext. Modes that only do a single operation (COMPRESS, CIPHER, DIGEST) should only use this region and leave the AAD region empty. If a digest is present (or should be generated), it's starting location is marked by crp_digest_start. Instead of using the CRD_F_ENCRYPT flag to determine the direction of the operation, cryptop now includes an 'op' field defining the operation to perform. For digests I've added a new VERIFY digest mode which assumes a digest is present in the input and fails the request with EBADMSG if it doesn't match the internally-computed digest. GCM and CCM already assumed this, and the new AEAD mode requires this for decryption. The new ETA mode now also requires this for decryption, so IPsec and GELI no longer do their own authentication verification. Simple DIGEST operations can also do this, though there are no in-tree consumers. To eventually support some refcounting to close races, the session cookie is now passed to crypto_getop() and clients should no longer set crp_sesssion directly. - Assymteric crypto operation structures should be allocated via crypto_getkreq() and freed via crypto_freekreq(). This permits the crypto layer to track open asym requests and close races with a driver trying to unregister while asym requests are in flight. - crypto_copyback, crypto_copydata, crypto_apply, and crypto_contiguous_subsegment now accept the 'crp' object as the first parameter instead of individual members. This makes it easier to deal with different buffer types in the future as well as separate input and output buffers. It's also simpler for driver writers to use. - bus_dmamap_load_crp() loads a DMA mapping for a crypto buffer. This understands the various types of buffers so that drivers that use DMA do not have to be aware of different buffer types. - Helper routines now exist to build an auth context for HMAC IPAD and OPAD. This reduces some duplicated work among drivers. - Key buffers are now treated as const throughout the framework and in device drivers. However, session key buffers provided when a session is created are expected to remain alive for the duration of the session. - GCM and CCM sessions now only specify a cipher algorithm and a cipher key. The redundant auth information is not needed or used. - For cryptosoft, split up the code a bit such that the 'process' callback now invokes a function pointer in the session. This function pointer is set based on the mode (in effect) though it simplifies a few edge cases that would otherwise be in the switch in 'process'. It does split up GCM vs CCM which I think is more readable even if there is some duplication. - I changed /dev/crypto to support GMAC requests using CRYPTO_AES_NIST_GMAC as an auth algorithm and updated cryptocheck to work with it. - Combined cipher and auth sessions via /dev/crypto now always use ETA mode. The COP_F_CIPHER_FIRST flag is now a no-op that is ignored. This was actually documented as being true in crypto(4) before, but the code had not implemented this before I added the CIPHER_FIRST flag. - I have not yet updated /dev/crypto to be aware of explicit modes for sessions. I will probably do that at some point in the future as well as teach it about IV/nonce and tag lengths for AEAD so we can support all of the NIST KAT tests for GCM and CCM. - I've split up the exising crypto.9 manpage into several pages of which many are written from scratch. - I have converted all drivers and consumers in the tree and verified that they compile, but I have not tested all of them. I have tested the following drivers: - cryptosoft - aesni (AES only) - blake2 - ccr and the following consumers: - cryptodev - IPsec - ktls_ocf - GELI (lightly) I have not tested the following: - ccp - aesni with sha - hifn - kgssapi_krb5 - ubsec - padlock - safe - armv8_crypto (aarch64) - glxsb (i386) - sec (ppc) - cesa (armv7) - cryptocteon (mips64) - nlmsec (mips64) Discussed with: cem Relnotes: yes Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D23677
2020-03-27 18:25:23 +00:00
case CRYPTO_BUF_UIO:
Add support for optional separate output buffers to in-kernel crypto. Some crypto consumers such as GELI and KTLS for file-backed sendfile need to store their output in a separate buffer from the input. Currently these consumers copy the contents of the input buffer into the output buffer and queue an in-place crypto operation on the output buffer. Using a separate output buffer avoids this copy. - Create a new 'struct crypto_buffer' describing a crypto buffer containing a type and type-specific fields. crp_ilen is gone, instead buffers that use a flat kernel buffer have a cb_buf_len field for their length. The length of other buffer types is inferred from the backing store (e.g. uio_resid for a uio). Requests now have two such structures: crp_buf for the input buffer, and crp_obuf for the output buffer. - Consumers now use helper functions (crypto_use_*, e.g. crypto_use_mbuf()) to configure the input buffer. If an output buffer is not configured, the request still modifies the input buffer in-place. A consumer uses a second set of helper functions (crypto_use_output_*) to configure an output buffer. - Consumers must request support for separate output buffers when creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are only permitted to queue a request with a separate output buffer on sessions with this flag set. Existing drivers already reject sessions with unknown flags, so this permits drivers to be modified to support this extension without requiring all drivers to change. - Several data-related functions now have matching versions that operate on an explicit buffer (e.g. crypto_apply_buf, crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf). - Most of the existing data-related functions operate on the input buffer. However crypto_copyback always writes to the output buffer if a request uses a separate output buffer. - For the regions in input/output buffers, the following conventions are followed: - AAD and IV are always present in input only and their fields are offsets into the input buffer. - payload is always present in both buffers. If a request uses a separate output buffer, it must set a new crp_payload_start_output field to the offset of the payload in the output buffer. - digest is in the input buffer for verify operations, and in the output buffer for compute operations. crp_digest_start is relative to the appropriate buffer. - Add a crypto buffer cursor abstraction. This is a more general form of some bits in the cryptosoft driver that tried to always use uio's. However, compared to the original code, this avoids rewalking the uio iovec array for requests with multiple vectors. It also avoids allocate an iovec array for mbufs and populating it by instead walking the mbuf chain directly. - Update the cryptosoft(4) driver to support separate output buffers making use of the cursor abstraction. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D24545
2020-05-25 22:12:04 +00:00
cuio_copyback(cb->cb_uio, off, size, src);
Refactor driver and consumer interfaces for OCF (in-kernel crypto). - The linked list of cryptoini structures used in session initialization is replaced with a new flat structure: struct crypto_session_params. This session includes a new mode to define how the other fields should be interpreted. Available modes include: - COMPRESS (for compression/decompression) - CIPHER (for simply encryption/decryption) - DIGEST (computing and verifying digests) - AEAD (combined auth and encryption such as AES-GCM and AES-CCM) - ETA (combined auth and encryption using encrypt-then-authenticate) Additional modes could be added in the future (e.g. if we wanted to support TLS MtE for AES-CBC in the kernel we could add a new mode for that. TLS modes might also affect how AAD is interpreted, etc.) The flat structure also includes the key lengths and algorithms as before. However, code doesn't have to walk the linked list and switch on the algorithm to determine which key is the auth key vs encryption key. The 'csp_auth_*' fields are always used for auth keys and settings and 'csp_cipher_*' for cipher. (Compression algorithms are stored in csp_cipher_alg.) - Drivers no longer register a list of supported algorithms. This doesn't quite work when you factor in modes (e.g. a driver might support both AES-CBC and SHA2-256-HMAC separately but not combined for ETA). Instead, a new 'crypto_probesession' method has been added to the kobj interface for symmteric crypto drivers. This method returns a negative value on success (similar to how device_probe works) and the crypto framework uses this value to pick the "best" driver. There are three constants for hardware (e.g. ccr), accelerated software (e.g. aesni), and plain software (cryptosoft) that give preference in that order. One effect of this is that if you request only hardware when creating a new session, you will no longer get a session using accelerated software. Another effect is that the default setting to disallow software crypto via /dev/crypto now disables accelerated software. Once a driver is chosen, 'crypto_newsession' is invoked as before. - Crypto operations are now solely described by the flat 'cryptop' structure. The linked list of descriptors has been removed. A separate enum has been added to describe the type of data buffer in use instead of using CRYPTO_F_* flags to make it easier to add more types in the future if needed (e.g. wired userspace buffers for zero-copy). It will also make it easier to re-introduce separate input and output buffers (in-kernel TLS would benefit from this). Try to make the flags related to IV handling less insane: - CRYPTO_F_IV_SEPARATE means that the IV is stored in the 'crp_iv' member of the operation structure. If this flag is not set, the IV is stored in the data buffer at the 'crp_iv_start' offset. - CRYPTO_F_IV_GENERATE means that a random IV should be generated and stored into the data buffer. This cannot be used with CRYPTO_F_IV_SEPARATE. If a consumer wants to deal with explicit vs implicit IVs, etc. it can always generate the IV however it needs and store partial IVs in the buffer and the full IV/nonce in crp_iv and set CRYPTO_F_IV_SEPARATE. The layout of the buffer is now described via fields in cryptop. crp_aad_start and crp_aad_length define the boundaries of any AAD. Previously with GCM and CCM you defined an auth crd with this range, but for ETA your auth crd had to span both the AAD and plaintext (and they had to be adjacent). crp_payload_start and crp_payload_length define the boundaries of the plaintext/ciphertext. Modes that only do a single operation (COMPRESS, CIPHER, DIGEST) should only use this region and leave the AAD region empty. If a digest is present (or should be generated), it's starting location is marked by crp_digest_start. Instead of using the CRD_F_ENCRYPT flag to determine the direction of the operation, cryptop now includes an 'op' field defining the operation to perform. For digests I've added a new VERIFY digest mode which assumes a digest is present in the input and fails the request with EBADMSG if it doesn't match the internally-computed digest. GCM and CCM already assumed this, and the new AEAD mode requires this for decryption. The new ETA mode now also requires this for decryption, so IPsec and GELI no longer do their own authentication verification. Simple DIGEST operations can also do this, though there are no in-tree consumers. To eventually support some refcounting to close races, the session cookie is now passed to crypto_getop() and clients should no longer set crp_sesssion directly. - Assymteric crypto operation structures should be allocated via crypto_getkreq() and freed via crypto_freekreq(). This permits the crypto layer to track open asym requests and close races with a driver trying to unregister while asym requests are in flight. - crypto_copyback, crypto_copydata, crypto_apply, and crypto_contiguous_subsegment now accept the 'crp' object as the first parameter instead of individual members. This makes it easier to deal with different buffer types in the future as well as separate input and output buffers. It's also simpler for driver writers to use. - bus_dmamap_load_crp() loads a DMA mapping for a crypto buffer. This understands the various types of buffers so that drivers that use DMA do not have to be aware of different buffer types. - Helper routines now exist to build an auth context for HMAC IPAD and OPAD. This reduces some duplicated work among drivers. - Key buffers are now treated as const throughout the framework and in device drivers. However, session key buffers provided when a session is created are expected to remain alive for the duration of the session. - GCM and CCM sessions now only specify a cipher algorithm and a cipher key. The redundant auth information is not needed or used. - For cryptosoft, split up the code a bit such that the 'process' callback now invokes a function pointer in the session. This function pointer is set based on the mode (in effect) though it simplifies a few edge cases that would otherwise be in the switch in 'process'. It does split up GCM vs CCM which I think is more readable even if there is some duplication. - I changed /dev/crypto to support GMAC requests using CRYPTO_AES_NIST_GMAC as an auth algorithm and updated cryptocheck to work with it. - Combined cipher and auth sessions via /dev/crypto now always use ETA mode. The COP_F_CIPHER_FIRST flag is now a no-op that is ignored. This was actually documented as being true in crypto(4) before, but the code had not implemented this before I added the CIPHER_FIRST flag. - I have not yet updated /dev/crypto to be aware of explicit modes for sessions. I will probably do that at some point in the future as well as teach it about IV/nonce and tag lengths for AEAD so we can support all of the NIST KAT tests for GCM and CCM. - I've split up the exising crypto.9 manpage into several pages of which many are written from scratch. - I have converted all drivers and consumers in the tree and verified that they compile, but I have not tested all of them. I have tested the following drivers: - cryptosoft - aesni (AES only) - blake2 - ccr and the following consumers: - cryptodev - IPsec - ktls_ocf - GELI (lightly) I have not tested the following: - ccp - aesni with sha - hifn - kgssapi_krb5 - ubsec - padlock - safe - armv8_crypto (aarch64) - glxsb (i386) - sec (ppc) - cesa (armv7) - cryptocteon (mips64) - nlmsec (mips64) Discussed with: cem Relnotes: yes Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D23677
2020-03-27 18:25:23 +00:00
break;
case CRYPTO_BUF_CONTIG:
Add support for optional separate output buffers to in-kernel crypto. Some crypto consumers such as GELI and KTLS for file-backed sendfile need to store their output in a separate buffer from the input. Currently these consumers copy the contents of the input buffer into the output buffer and queue an in-place crypto operation on the output buffer. Using a separate output buffer avoids this copy. - Create a new 'struct crypto_buffer' describing a crypto buffer containing a type and type-specific fields. crp_ilen is gone, instead buffers that use a flat kernel buffer have a cb_buf_len field for their length. The length of other buffer types is inferred from the backing store (e.g. uio_resid for a uio). Requests now have two such structures: crp_buf for the input buffer, and crp_obuf for the output buffer. - Consumers now use helper functions (crypto_use_*, e.g. crypto_use_mbuf()) to configure the input buffer. If an output buffer is not configured, the request still modifies the input buffer in-place. A consumer uses a second set of helper functions (crypto_use_output_*) to configure an output buffer. - Consumers must request support for separate output buffers when creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are only permitted to queue a request with a separate output buffer on sessions with this flag set. Existing drivers already reject sessions with unknown flags, so this permits drivers to be modified to support this extension without requiring all drivers to change. - Several data-related functions now have matching versions that operate on an explicit buffer (e.g. crypto_apply_buf, crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf). - Most of the existing data-related functions operate on the input buffer. However crypto_copyback always writes to the output buffer if a request uses a separate output buffer. - For the regions in input/output buffers, the following conventions are followed: - AAD and IV are always present in input only and their fields are offsets into the input buffer. - payload is always present in both buffers. If a request uses a separate output buffer, it must set a new crp_payload_start_output field to the offset of the payload in the output buffer. - digest is in the input buffer for verify operations, and in the output buffer for compute operations. crp_digest_start is relative to the appropriate buffer. - Add a crypto buffer cursor abstraction. This is a more general form of some bits in the cryptosoft driver that tried to always use uio's. However, compared to the original code, this avoids rewalking the uio iovec array for requests with multiple vectors. It also avoids allocate an iovec array for mbufs and populating it by instead walking the mbuf chain directly. - Update the cryptosoft(4) driver to support separate output buffers making use of the cursor abstraction. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D24545
2020-05-25 22:12:04 +00:00
MPASS(off + size <= cb->cb_buf_len);
bcopy(src, cb->cb_buf + off, size);
Refactor driver and consumer interfaces for OCF (in-kernel crypto). - The linked list of cryptoini structures used in session initialization is replaced with a new flat structure: struct crypto_session_params. This session includes a new mode to define how the other fields should be interpreted. Available modes include: - COMPRESS (for compression/decompression) - CIPHER (for simply encryption/decryption) - DIGEST (computing and verifying digests) - AEAD (combined auth and encryption such as AES-GCM and AES-CCM) - ETA (combined auth and encryption using encrypt-then-authenticate) Additional modes could be added in the future (e.g. if we wanted to support TLS MtE for AES-CBC in the kernel we could add a new mode for that. TLS modes might also affect how AAD is interpreted, etc.) The flat structure also includes the key lengths and algorithms as before. However, code doesn't have to walk the linked list and switch on the algorithm to determine which key is the auth key vs encryption key. The 'csp_auth_*' fields are always used for auth keys and settings and 'csp_cipher_*' for cipher. (Compression algorithms are stored in csp_cipher_alg.) - Drivers no longer register a list of supported algorithms. This doesn't quite work when you factor in modes (e.g. a driver might support both AES-CBC and SHA2-256-HMAC separately but not combined for ETA). Instead, a new 'crypto_probesession' method has been added to the kobj interface for symmteric crypto drivers. This method returns a negative value on success (similar to how device_probe works) and the crypto framework uses this value to pick the "best" driver. There are three constants for hardware (e.g. ccr), accelerated software (e.g. aesni), and plain software (cryptosoft) that give preference in that order. One effect of this is that if you request only hardware when creating a new session, you will no longer get a session using accelerated software. Another effect is that the default setting to disallow software crypto via /dev/crypto now disables accelerated software. Once a driver is chosen, 'crypto_newsession' is invoked as before. - Crypto operations are now solely described by the flat 'cryptop' structure. The linked list of descriptors has been removed. A separate enum has been added to describe the type of data buffer in use instead of using CRYPTO_F_* flags to make it easier to add more types in the future if needed (e.g. wired userspace buffers for zero-copy). It will also make it easier to re-introduce separate input and output buffers (in-kernel TLS would benefit from this). Try to make the flags related to IV handling less insane: - CRYPTO_F_IV_SEPARATE means that the IV is stored in the 'crp_iv' member of the operation structure. If this flag is not set, the IV is stored in the data buffer at the 'crp_iv_start' offset. - CRYPTO_F_IV_GENERATE means that a random IV should be generated and stored into the data buffer. This cannot be used with CRYPTO_F_IV_SEPARATE. If a consumer wants to deal with explicit vs implicit IVs, etc. it can always generate the IV however it needs and store partial IVs in the buffer and the full IV/nonce in crp_iv and set CRYPTO_F_IV_SEPARATE. The layout of the buffer is now described via fields in cryptop. crp_aad_start and crp_aad_length define the boundaries of any AAD. Previously with GCM and CCM you defined an auth crd with this range, but for ETA your auth crd had to span both the AAD and plaintext (and they had to be adjacent). crp_payload_start and crp_payload_length define the boundaries of the plaintext/ciphertext. Modes that only do a single operation (COMPRESS, CIPHER, DIGEST) should only use this region and leave the AAD region empty. If a digest is present (or should be generated), it's starting location is marked by crp_digest_start. Instead of using the CRD_F_ENCRYPT flag to determine the direction of the operation, cryptop now includes an 'op' field defining the operation to perform. For digests I've added a new VERIFY digest mode which assumes a digest is present in the input and fails the request with EBADMSG if it doesn't match the internally-computed digest. GCM and CCM already assumed this, and the new AEAD mode requires this for decryption. The new ETA mode now also requires this for decryption, so IPsec and GELI no longer do their own authentication verification. Simple DIGEST operations can also do this, though there are no in-tree consumers. To eventually support some refcounting to close races, the session cookie is now passed to crypto_getop() and clients should no longer set crp_sesssion directly. - Assymteric crypto operation structures should be allocated via crypto_getkreq() and freed via crypto_freekreq(). This permits the crypto layer to track open asym requests and close races with a driver trying to unregister while asym requests are in flight. - crypto_copyback, crypto_copydata, crypto_apply, and crypto_contiguous_subsegment now accept the 'crp' object as the first parameter instead of individual members. This makes it easier to deal with different buffer types in the future as well as separate input and output buffers. It's also simpler for driver writers to use. - bus_dmamap_load_crp() loads a DMA mapping for a crypto buffer. This understands the various types of buffers so that drivers that use DMA do not have to be aware of different buffer types. - Helper routines now exist to build an auth context for HMAC IPAD and OPAD. This reduces some duplicated work among drivers. - Key buffers are now treated as const throughout the framework and in device drivers. However, session key buffers provided when a session is created are expected to remain alive for the duration of the session. - GCM and CCM sessions now only specify a cipher algorithm and a cipher key. The redundant auth information is not needed or used. - For cryptosoft, split up the code a bit such that the 'process' callback now invokes a function pointer in the session. This function pointer is set based on the mode (in effect) though it simplifies a few edge cases that would otherwise be in the switch in 'process'. It does split up GCM vs CCM which I think is more readable even if there is some duplication. - I changed /dev/crypto to support GMAC requests using CRYPTO_AES_NIST_GMAC as an auth algorithm and updated cryptocheck to work with it. - Combined cipher and auth sessions via /dev/crypto now always use ETA mode. The COP_F_CIPHER_FIRST flag is now a no-op that is ignored. This was actually documented as being true in crypto(4) before, but the code had not implemented this before I added the CIPHER_FIRST flag. - I have not yet updated /dev/crypto to be aware of explicit modes for sessions. I will probably do that at some point in the future as well as teach it about IV/nonce and tag lengths for AEAD so we can support all of the NIST KAT tests for GCM and CCM. - I've split up the exising crypto.9 manpage into several pages of which many are written from scratch. - I have converted all drivers and consumers in the tree and verified that they compile, but I have not tested all of them. I have tested the following drivers: - cryptosoft - aesni (AES only) - blake2 - ccr and the following consumers: - cryptodev - IPsec - ktls_ocf - GELI (lightly) I have not tested the following: - ccp - aesni with sha - hifn - kgssapi_krb5 - ubsec - padlock - safe - armv8_crypto (aarch64) - glxsb (i386) - sec (ppc) - cesa (armv7) - cryptocteon (mips64) - nlmsec (mips64) Discussed with: cem Relnotes: yes Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D23677
2020-03-27 18:25:23 +00:00
break;
default:
Add support for optional separate output buffers to in-kernel crypto. Some crypto consumers such as GELI and KTLS for file-backed sendfile need to store their output in a separate buffer from the input. Currently these consumers copy the contents of the input buffer into the output buffer and queue an in-place crypto operation on the output buffer. Using a separate output buffer avoids this copy. - Create a new 'struct crypto_buffer' describing a crypto buffer containing a type and type-specific fields. crp_ilen is gone, instead buffers that use a flat kernel buffer have a cb_buf_len field for their length. The length of other buffer types is inferred from the backing store (e.g. uio_resid for a uio). Requests now have two such structures: crp_buf for the input buffer, and crp_obuf for the output buffer. - Consumers now use helper functions (crypto_use_*, e.g. crypto_use_mbuf()) to configure the input buffer. If an output buffer is not configured, the request still modifies the input buffer in-place. A consumer uses a second set of helper functions (crypto_use_output_*) to configure an output buffer. - Consumers must request support for separate output buffers when creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are only permitted to queue a request with a separate output buffer on sessions with this flag set. Existing drivers already reject sessions with unknown flags, so this permits drivers to be modified to support this extension without requiring all drivers to change. - Several data-related functions now have matching versions that operate on an explicit buffer (e.g. crypto_apply_buf, crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf). - Most of the existing data-related functions operate on the input buffer. However crypto_copyback always writes to the output buffer if a request uses a separate output buffer. - For the regions in input/output buffers, the following conventions are followed: - AAD and IV are always present in input only and their fields are offsets into the input buffer. - payload is always present in both buffers. If a request uses a separate output buffer, it must set a new crp_payload_start_output field to the offset of the payload in the output buffer. - digest is in the input buffer for verify operations, and in the output buffer for compute operations. crp_digest_start is relative to the appropriate buffer. - Add a crypto buffer cursor abstraction. This is a more general form of some bits in the cryptosoft driver that tried to always use uio's. However, compared to the original code, this avoids rewalking the uio iovec array for requests with multiple vectors. It also avoids allocate an iovec array for mbufs and populating it by instead walking the mbuf chain directly. - Update the cryptosoft(4) driver to support separate output buffers making use of the cursor abstraction. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D24545
2020-05-25 22:12:04 +00:00
#ifdef INVARIANTS
panic("invalid crp buf type %d", cb->cb_type);
#endif
break;
Refactor driver and consumer interfaces for OCF (in-kernel crypto). - The linked list of cryptoini structures used in session initialization is replaced with a new flat structure: struct crypto_session_params. This session includes a new mode to define how the other fields should be interpreted. Available modes include: - COMPRESS (for compression/decompression) - CIPHER (for simply encryption/decryption) - DIGEST (computing and verifying digests) - AEAD (combined auth and encryption such as AES-GCM and AES-CCM) - ETA (combined auth and encryption using encrypt-then-authenticate) Additional modes could be added in the future (e.g. if we wanted to support TLS MtE for AES-CBC in the kernel we could add a new mode for that. TLS modes might also affect how AAD is interpreted, etc.) The flat structure also includes the key lengths and algorithms as before. However, code doesn't have to walk the linked list and switch on the algorithm to determine which key is the auth key vs encryption key. The 'csp_auth_*' fields are always used for auth keys and settings and 'csp_cipher_*' for cipher. (Compression algorithms are stored in csp_cipher_alg.) - Drivers no longer register a list of supported algorithms. This doesn't quite work when you factor in modes (e.g. a driver might support both AES-CBC and SHA2-256-HMAC separately but not combined for ETA). Instead, a new 'crypto_probesession' method has been added to the kobj interface for symmteric crypto drivers. This method returns a negative value on success (similar to how device_probe works) and the crypto framework uses this value to pick the "best" driver. There are three constants for hardware (e.g. ccr), accelerated software (e.g. aesni), and plain software (cryptosoft) that give preference in that order. One effect of this is that if you request only hardware when creating a new session, you will no longer get a session using accelerated software. Another effect is that the default setting to disallow software crypto via /dev/crypto now disables accelerated software. Once a driver is chosen, 'crypto_newsession' is invoked as before. - Crypto operations are now solely described by the flat 'cryptop' structure. The linked list of descriptors has been removed. A separate enum has been added to describe the type of data buffer in use instead of using CRYPTO_F_* flags to make it easier to add more types in the future if needed (e.g. wired userspace buffers for zero-copy). It will also make it easier to re-introduce separate input and output buffers (in-kernel TLS would benefit from this). Try to make the flags related to IV handling less insane: - CRYPTO_F_IV_SEPARATE means that the IV is stored in the 'crp_iv' member of the operation structure. If this flag is not set, the IV is stored in the data buffer at the 'crp_iv_start' offset. - CRYPTO_F_IV_GENERATE means that a random IV should be generated and stored into the data buffer. This cannot be used with CRYPTO_F_IV_SEPARATE. If a consumer wants to deal with explicit vs implicit IVs, etc. it can always generate the IV however it needs and store partial IVs in the buffer and the full IV/nonce in crp_iv and set CRYPTO_F_IV_SEPARATE. The layout of the buffer is now described via fields in cryptop. crp_aad_start and crp_aad_length define the boundaries of any AAD. Previously with GCM and CCM you defined an auth crd with this range, but for ETA your auth crd had to span both the AAD and plaintext (and they had to be adjacent). crp_payload_start and crp_payload_length define the boundaries of the plaintext/ciphertext. Modes that only do a single operation (COMPRESS, CIPHER, DIGEST) should only use this region and leave the AAD region empty. If a digest is present (or should be generated), it's starting location is marked by crp_digest_start. Instead of using the CRD_F_ENCRYPT flag to determine the direction of the operation, cryptop now includes an 'op' field defining the operation to perform. For digests I've added a new VERIFY digest mode which assumes a digest is present in the input and fails the request with EBADMSG if it doesn't match the internally-computed digest. GCM and CCM already assumed this, and the new AEAD mode requires this for decryption. The new ETA mode now also requires this for decryption, so IPsec and GELI no longer do their own authentication verification. Simple DIGEST operations can also do this, though there are no in-tree consumers. To eventually support some refcounting to close races, the session cookie is now passed to crypto_getop() and clients should no longer set crp_sesssion directly. - Assymteric crypto operation structures should be allocated via crypto_getkreq() and freed via crypto_freekreq(). This permits the crypto layer to track open asym requests and close races with a driver trying to unregister while asym requests are in flight. - crypto_copyback, crypto_copydata, crypto_apply, and crypto_contiguous_subsegment now accept the 'crp' object as the first parameter instead of individual members. This makes it easier to deal with different buffer types in the future as well as separate input and output buffers. It's also simpler for driver writers to use. - bus_dmamap_load_crp() loads a DMA mapping for a crypto buffer. This understands the various types of buffers so that drivers that use DMA do not have to be aware of different buffer types. - Helper routines now exist to build an auth context for HMAC IPAD and OPAD. This reduces some duplicated work among drivers. - Key buffers are now treated as const throughout the framework and in device drivers. However, session key buffers provided when a session is created are expected to remain alive for the duration of the session. - GCM and CCM sessions now only specify a cipher algorithm and a cipher key. The redundant auth information is not needed or used. - For cryptosoft, split up the code a bit such that the 'process' callback now invokes a function pointer in the session. This function pointer is set based on the mode (in effect) though it simplifies a few edge cases that would otherwise be in the switch in 'process'. It does split up GCM vs CCM which I think is more readable even if there is some duplication. - I changed /dev/crypto to support GMAC requests using CRYPTO_AES_NIST_GMAC as an auth algorithm and updated cryptocheck to work with it. - Combined cipher and auth sessions via /dev/crypto now always use ETA mode. The COP_F_CIPHER_FIRST flag is now a no-op that is ignored. This was actually documented as being true in crypto(4) before, but the code had not implemented this before I added the CIPHER_FIRST flag. - I have not yet updated /dev/crypto to be aware of explicit modes for sessions. I will probably do that at some point in the future as well as teach it about IV/nonce and tag lengths for AEAD so we can support all of the NIST KAT tests for GCM and CCM. - I've split up the exising crypto.9 manpage into several pages of which many are written from scratch. - I have converted all drivers and consumers in the tree and verified that they compile, but I have not tested all of them. I have tested the following drivers: - cryptosoft - aesni (AES only) - blake2 - ccr and the following consumers: - cryptodev - IPsec - ktls_ocf - GELI (lightly) I have not tested the following: - ccp - aesni with sha - hifn - kgssapi_krb5 - ubsec - padlock - safe - armv8_crypto (aarch64) - glxsb (i386) - sec (ppc) - cesa (armv7) - cryptocteon (mips64) - nlmsec (mips64) Discussed with: cem Relnotes: yes Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D23677
2020-03-27 18:25:23 +00:00
}
}
void
Refactor driver and consumer interfaces for OCF (in-kernel crypto). - The linked list of cryptoini structures used in session initialization is replaced with a new flat structure: struct crypto_session_params. This session includes a new mode to define how the other fields should be interpreted. Available modes include: - COMPRESS (for compression/decompression) - CIPHER (for simply encryption/decryption) - DIGEST (computing and verifying digests) - AEAD (combined auth and encryption such as AES-GCM and AES-CCM) - ETA (combined auth and encryption using encrypt-then-authenticate) Additional modes could be added in the future (e.g. if we wanted to support TLS MtE for AES-CBC in the kernel we could add a new mode for that. TLS modes might also affect how AAD is interpreted, etc.) The flat structure also includes the key lengths and algorithms as before. However, code doesn't have to walk the linked list and switch on the algorithm to determine which key is the auth key vs encryption key. The 'csp_auth_*' fields are always used for auth keys and settings and 'csp_cipher_*' for cipher. (Compression algorithms are stored in csp_cipher_alg.) - Drivers no longer register a list of supported algorithms. This doesn't quite work when you factor in modes (e.g. a driver might support both AES-CBC and SHA2-256-HMAC separately but not combined for ETA). Instead, a new 'crypto_probesession' method has been added to the kobj interface for symmteric crypto drivers. This method returns a negative value on success (similar to how device_probe works) and the crypto framework uses this value to pick the "best" driver. There are three constants for hardware (e.g. ccr), accelerated software (e.g. aesni), and plain software (cryptosoft) that give preference in that order. One effect of this is that if you request only hardware when creating a new session, you will no longer get a session using accelerated software. Another effect is that the default setting to disallow software crypto via /dev/crypto now disables accelerated software. Once a driver is chosen, 'crypto_newsession' is invoked as before. - Crypto operations are now solely described by the flat 'cryptop' structure. The linked list of descriptors has been removed. A separate enum has been added to describe the type of data buffer in use instead of using CRYPTO_F_* flags to make it easier to add more types in the future if needed (e.g. wired userspace buffers for zero-copy). It will also make it easier to re-introduce separate input and output buffers (in-kernel TLS would benefit from this). Try to make the flags related to IV handling less insane: - CRYPTO_F_IV_SEPARATE means that the IV is stored in the 'crp_iv' member of the operation structure. If this flag is not set, the IV is stored in the data buffer at the 'crp_iv_start' offset. - CRYPTO_F_IV_GENERATE means that a random IV should be generated and stored into the data buffer. This cannot be used with CRYPTO_F_IV_SEPARATE. If a consumer wants to deal with explicit vs implicit IVs, etc. it can always generate the IV however it needs and store partial IVs in the buffer and the full IV/nonce in crp_iv and set CRYPTO_F_IV_SEPARATE. The layout of the buffer is now described via fields in cryptop. crp_aad_start and crp_aad_length define the boundaries of any AAD. Previously with GCM and CCM you defined an auth crd with this range, but for ETA your auth crd had to span both the AAD and plaintext (and they had to be adjacent). crp_payload_start and crp_payload_length define the boundaries of the plaintext/ciphertext. Modes that only do a single operation (COMPRESS, CIPHER, DIGEST) should only use this region and leave the AAD region empty. If a digest is present (or should be generated), it's starting location is marked by crp_digest_start. Instead of using the CRD_F_ENCRYPT flag to determine the direction of the operation, cryptop now includes an 'op' field defining the operation to perform. For digests I've added a new VERIFY digest mode which assumes a digest is present in the input and fails the request with EBADMSG if it doesn't match the internally-computed digest. GCM and CCM already assumed this, and the new AEAD mode requires this for decryption. The new ETA mode now also requires this for decryption, so IPsec and GELI no longer do their own authentication verification. Simple DIGEST operations can also do this, though there are no in-tree consumers. To eventually support some refcounting to close races, the session cookie is now passed to crypto_getop() and clients should no longer set crp_sesssion directly. - Assymteric crypto operation structures should be allocated via crypto_getkreq() and freed via crypto_freekreq(). This permits the crypto layer to track open asym requests and close races with a driver trying to unregister while asym requests are in flight. - crypto_copyback, crypto_copydata, crypto_apply, and crypto_contiguous_subsegment now accept the 'crp' object as the first parameter instead of individual members. This makes it easier to deal with different buffer types in the future as well as separate input and output buffers. It's also simpler for driver writers to use. - bus_dmamap_load_crp() loads a DMA mapping for a crypto buffer. This understands the various types of buffers so that drivers that use DMA do not have to be aware of different buffer types. - Helper routines now exist to build an auth context for HMAC IPAD and OPAD. This reduces some duplicated work among drivers. - Key buffers are now treated as const throughout the framework and in device drivers. However, session key buffers provided when a session is created are expected to remain alive for the duration of the session. - GCM and CCM sessions now only specify a cipher algorithm and a cipher key. The redundant auth information is not needed or used. - For cryptosoft, split up the code a bit such that the 'process' callback now invokes a function pointer in the session. This function pointer is set based on the mode (in effect) though it simplifies a few edge cases that would otherwise be in the switch in 'process'. It does split up GCM vs CCM which I think is more readable even if there is some duplication. - I changed /dev/crypto to support GMAC requests using CRYPTO_AES_NIST_GMAC as an auth algorithm and updated cryptocheck to work with it. - Combined cipher and auth sessions via /dev/crypto now always use ETA mode. The COP_F_CIPHER_FIRST flag is now a no-op that is ignored. This was actually documented as being true in crypto(4) before, but the code had not implemented this before I added the CIPHER_FIRST flag. - I have not yet updated /dev/crypto to be aware of explicit modes for sessions. I will probably do that at some point in the future as well as teach it about IV/nonce and tag lengths for AEAD so we can support all of the NIST KAT tests for GCM and CCM. - I've split up the exising crypto.9 manpage into several pages of which many are written from scratch. - I have converted all drivers and consumers in the tree and verified that they compile, but I have not tested all of them. I have tested the following drivers: - cryptosoft - aesni (AES only) - blake2 - ccr and the following consumers: - cryptodev - IPsec - ktls_ocf - GELI (lightly) I have not tested the following: - ccp - aesni with sha - hifn - kgssapi_krb5 - ubsec - padlock - safe - armv8_crypto (aarch64) - glxsb (i386) - sec (ppc) - cesa (armv7) - cryptocteon (mips64) - nlmsec (mips64) Discussed with: cem Relnotes: yes Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D23677
2020-03-27 18:25:23 +00:00
crypto_copydata(struct cryptop *crp, int off, int size, void *dst)
{
Add support for optional separate output buffers to in-kernel crypto. Some crypto consumers such as GELI and KTLS for file-backed sendfile need to store their output in a separate buffer from the input. Currently these consumers copy the contents of the input buffer into the output buffer and queue an in-place crypto operation on the output buffer. Using a separate output buffer avoids this copy. - Create a new 'struct crypto_buffer' describing a crypto buffer containing a type and type-specific fields. crp_ilen is gone, instead buffers that use a flat kernel buffer have a cb_buf_len field for their length. The length of other buffer types is inferred from the backing store (e.g. uio_resid for a uio). Requests now have two such structures: crp_buf for the input buffer, and crp_obuf for the output buffer. - Consumers now use helper functions (crypto_use_*, e.g. crypto_use_mbuf()) to configure the input buffer. If an output buffer is not configured, the request still modifies the input buffer in-place. A consumer uses a second set of helper functions (crypto_use_output_*) to configure an output buffer. - Consumers must request support for separate output buffers when creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are only permitted to queue a request with a separate output buffer on sessions with this flag set. Existing drivers already reject sessions with unknown flags, so this permits drivers to be modified to support this extension without requiring all drivers to change. - Several data-related functions now have matching versions that operate on an explicit buffer (e.g. crypto_apply_buf, crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf). - Most of the existing data-related functions operate on the input buffer. However crypto_copyback always writes to the output buffer if a request uses a separate output buffer. - For the regions in input/output buffers, the following conventions are followed: - AAD and IV are always present in input only and their fields are offsets into the input buffer. - payload is always present in both buffers. If a request uses a separate output buffer, it must set a new crp_payload_start_output field to the offset of the payload in the output buffer. - digest is in the input buffer for verify operations, and in the output buffer for compute operations. crp_digest_start is relative to the appropriate buffer. - Add a crypto buffer cursor abstraction. This is a more general form of some bits in the cryptosoft driver that tried to always use uio's. However, compared to the original code, this avoids rewalking the uio iovec array for requests with multiple vectors. It also avoids allocate an iovec array for mbufs and populating it by instead walking the mbuf chain directly. - Update the cryptosoft(4) driver to support separate output buffers making use of the cursor abstraction. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D24545
2020-05-25 22:12:04 +00:00
switch (crp->crp_buf.cb_type) {
Refactor driver and consumer interfaces for OCF (in-kernel crypto). - The linked list of cryptoini structures used in session initialization is replaced with a new flat structure: struct crypto_session_params. This session includes a new mode to define how the other fields should be interpreted. Available modes include: - COMPRESS (for compression/decompression) - CIPHER (for simply encryption/decryption) - DIGEST (computing and verifying digests) - AEAD (combined auth and encryption such as AES-GCM and AES-CCM) - ETA (combined auth and encryption using encrypt-then-authenticate) Additional modes could be added in the future (e.g. if we wanted to support TLS MtE for AES-CBC in the kernel we could add a new mode for that. TLS modes might also affect how AAD is interpreted, etc.) The flat structure also includes the key lengths and algorithms as before. However, code doesn't have to walk the linked list and switch on the algorithm to determine which key is the auth key vs encryption key. The 'csp_auth_*' fields are always used for auth keys and settings and 'csp_cipher_*' for cipher. (Compression algorithms are stored in csp_cipher_alg.) - Drivers no longer register a list of supported algorithms. This doesn't quite work when you factor in modes (e.g. a driver might support both AES-CBC and SHA2-256-HMAC separately but not combined for ETA). Instead, a new 'crypto_probesession' method has been added to the kobj interface for symmteric crypto drivers. This method returns a negative value on success (similar to how device_probe works) and the crypto framework uses this value to pick the "best" driver. There are three constants for hardware (e.g. ccr), accelerated software (e.g. aesni), and plain software (cryptosoft) that give preference in that order. One effect of this is that if you request only hardware when creating a new session, you will no longer get a session using accelerated software. Another effect is that the default setting to disallow software crypto via /dev/crypto now disables accelerated software. Once a driver is chosen, 'crypto_newsession' is invoked as before. - Crypto operations are now solely described by the flat 'cryptop' structure. The linked list of descriptors has been removed. A separate enum has been added to describe the type of data buffer in use instead of using CRYPTO_F_* flags to make it easier to add more types in the future if needed (e.g. wired userspace buffers for zero-copy). It will also make it easier to re-introduce separate input and output buffers (in-kernel TLS would benefit from this). Try to make the flags related to IV handling less insane: - CRYPTO_F_IV_SEPARATE means that the IV is stored in the 'crp_iv' member of the operation structure. If this flag is not set, the IV is stored in the data buffer at the 'crp_iv_start' offset. - CRYPTO_F_IV_GENERATE means that a random IV should be generated and stored into the data buffer. This cannot be used with CRYPTO_F_IV_SEPARATE. If a consumer wants to deal with explicit vs implicit IVs, etc. it can always generate the IV however it needs and store partial IVs in the buffer and the full IV/nonce in crp_iv and set CRYPTO_F_IV_SEPARATE. The layout of the buffer is now described via fields in cryptop. crp_aad_start and crp_aad_length define the boundaries of any AAD. Previously with GCM and CCM you defined an auth crd with this range, but for ETA your auth crd had to span both the AAD and plaintext (and they had to be adjacent). crp_payload_start and crp_payload_length define the boundaries of the plaintext/ciphertext. Modes that only do a single operation (COMPRESS, CIPHER, DIGEST) should only use this region and leave the AAD region empty. If a digest is present (or should be generated), it's starting location is marked by crp_digest_start. Instead of using the CRD_F_ENCRYPT flag to determine the direction of the operation, cryptop now includes an 'op' field defining the operation to perform. For digests I've added a new VERIFY digest mode which assumes a digest is present in the input and fails the request with EBADMSG if it doesn't match the internally-computed digest. GCM and CCM already assumed this, and the new AEAD mode requires this for decryption. The new ETA mode now also requires this for decryption, so IPsec and GELI no longer do their own authentication verification. Simple DIGEST operations can also do this, though there are no in-tree consumers. To eventually support some refcounting to close races, the session cookie is now passed to crypto_getop() and clients should no longer set crp_sesssion directly. - Assymteric crypto operation structures should be allocated via crypto_getkreq() and freed via crypto_freekreq(). This permits the crypto layer to track open asym requests and close races with a driver trying to unregister while asym requests are in flight. - crypto_copyback, crypto_copydata, crypto_apply, and crypto_contiguous_subsegment now accept the 'crp' object as the first parameter instead of individual members. This makes it easier to deal with different buffer types in the future as well as separate input and output buffers. It's also simpler for driver writers to use. - bus_dmamap_load_crp() loads a DMA mapping for a crypto buffer. This understands the various types of buffers so that drivers that use DMA do not have to be aware of different buffer types. - Helper routines now exist to build an auth context for HMAC IPAD and OPAD. This reduces some duplicated work among drivers. - Key buffers are now treated as const throughout the framework and in device drivers. However, session key buffers provided when a session is created are expected to remain alive for the duration of the session. - GCM and CCM sessions now only specify a cipher algorithm and a cipher key. The redundant auth information is not needed or used. - For cryptosoft, split up the code a bit such that the 'process' callback now invokes a function pointer in the session. This function pointer is set based on the mode (in effect) though it simplifies a few edge cases that would otherwise be in the switch in 'process'. It does split up GCM vs CCM which I think is more readable even if there is some duplication. - I changed /dev/crypto to support GMAC requests using CRYPTO_AES_NIST_GMAC as an auth algorithm and updated cryptocheck to work with it. - Combined cipher and auth sessions via /dev/crypto now always use ETA mode. The COP_F_CIPHER_FIRST flag is now a no-op that is ignored. This was actually documented as being true in crypto(4) before, but the code had not implemented this before I added the CIPHER_FIRST flag. - I have not yet updated /dev/crypto to be aware of explicit modes for sessions. I will probably do that at some point in the future as well as teach it about IV/nonce and tag lengths for AEAD so we can support all of the NIST KAT tests for GCM and CCM. - I've split up the exising crypto.9 manpage into several pages of which many are written from scratch. - I have converted all drivers and consumers in the tree and verified that they compile, but I have not tested all of them. I have tested the following drivers: - cryptosoft - aesni (AES only) - blake2 - ccr and the following consumers: - cryptodev - IPsec - ktls_ocf - GELI (lightly) I have not tested the following: - ccp - aesni with sha - hifn - kgssapi_krb5 - ubsec - padlock - safe - armv8_crypto (aarch64) - glxsb (i386) - sec (ppc) - cesa (armv7) - cryptocteon (mips64) - nlmsec (mips64) Discussed with: cem Relnotes: yes Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D23677
2020-03-27 18:25:23 +00:00
case CRYPTO_BUF_MBUF:
case CRYPTO_BUF_SINGLE_MBUF:
Add support for optional separate output buffers to in-kernel crypto. Some crypto consumers such as GELI and KTLS for file-backed sendfile need to store their output in a separate buffer from the input. Currently these consumers copy the contents of the input buffer into the output buffer and queue an in-place crypto operation on the output buffer. Using a separate output buffer avoids this copy. - Create a new 'struct crypto_buffer' describing a crypto buffer containing a type and type-specific fields. crp_ilen is gone, instead buffers that use a flat kernel buffer have a cb_buf_len field for their length. The length of other buffer types is inferred from the backing store (e.g. uio_resid for a uio). Requests now have two such structures: crp_buf for the input buffer, and crp_obuf for the output buffer. - Consumers now use helper functions (crypto_use_*, e.g. crypto_use_mbuf()) to configure the input buffer. If an output buffer is not configured, the request still modifies the input buffer in-place. A consumer uses a second set of helper functions (crypto_use_output_*) to configure an output buffer. - Consumers must request support for separate output buffers when creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are only permitted to queue a request with a separate output buffer on sessions with this flag set. Existing drivers already reject sessions with unknown flags, so this permits drivers to be modified to support this extension without requiring all drivers to change. - Several data-related functions now have matching versions that operate on an explicit buffer (e.g. crypto_apply_buf, crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf). - Most of the existing data-related functions operate on the input buffer. However crypto_copyback always writes to the output buffer if a request uses a separate output buffer. - For the regions in input/output buffers, the following conventions are followed: - AAD and IV are always present in input only and their fields are offsets into the input buffer. - payload is always present in both buffers. If a request uses a separate output buffer, it must set a new crp_payload_start_output field to the offset of the payload in the output buffer. - digest is in the input buffer for verify operations, and in the output buffer for compute operations. crp_digest_start is relative to the appropriate buffer. - Add a crypto buffer cursor abstraction. This is a more general form of some bits in the cryptosoft driver that tried to always use uio's. However, compared to the original code, this avoids rewalking the uio iovec array for requests with multiple vectors. It also avoids allocate an iovec array for mbufs and populating it by instead walking the mbuf chain directly. - Update the cryptosoft(4) driver to support separate output buffers making use of the cursor abstraction. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D24545
2020-05-25 22:12:04 +00:00
m_copydata(crp->crp_buf.cb_mbuf, off, size, dst);
Refactor driver and consumer interfaces for OCF (in-kernel crypto). - The linked list of cryptoini structures used in session initialization is replaced with a new flat structure: struct crypto_session_params. This session includes a new mode to define how the other fields should be interpreted. Available modes include: - COMPRESS (for compression/decompression) - CIPHER (for simply encryption/decryption) - DIGEST (computing and verifying digests) - AEAD (combined auth and encryption such as AES-GCM and AES-CCM) - ETA (combined auth and encryption using encrypt-then-authenticate) Additional modes could be added in the future (e.g. if we wanted to support TLS MtE for AES-CBC in the kernel we could add a new mode for that. TLS modes might also affect how AAD is interpreted, etc.) The flat structure also includes the key lengths and algorithms as before. However, code doesn't have to walk the linked list and switch on the algorithm to determine which key is the auth key vs encryption key. The 'csp_auth_*' fields are always used for auth keys and settings and 'csp_cipher_*' for cipher. (Compression algorithms are stored in csp_cipher_alg.) - Drivers no longer register a list of supported algorithms. This doesn't quite work when you factor in modes (e.g. a driver might support both AES-CBC and SHA2-256-HMAC separately but not combined for ETA). Instead, a new 'crypto_probesession' method has been added to the kobj interface for symmteric crypto drivers. This method returns a negative value on success (similar to how device_probe works) and the crypto framework uses this value to pick the "best" driver. There are three constants for hardware (e.g. ccr), accelerated software (e.g. aesni), and plain software (cryptosoft) that give preference in that order. One effect of this is that if you request only hardware when creating a new session, you will no longer get a session using accelerated software. Another effect is that the default setting to disallow software crypto via /dev/crypto now disables accelerated software. Once a driver is chosen, 'crypto_newsession' is invoked as before. - Crypto operations are now solely described by the flat 'cryptop' structure. The linked list of descriptors has been removed. A separate enum has been added to describe the type of data buffer in use instead of using CRYPTO_F_* flags to make it easier to add more types in the future if needed (e.g. wired userspace buffers for zero-copy). It will also make it easier to re-introduce separate input and output buffers (in-kernel TLS would benefit from this). Try to make the flags related to IV handling less insane: - CRYPTO_F_IV_SEPARATE means that the IV is stored in the 'crp_iv' member of the operation structure. If this flag is not set, the IV is stored in the data buffer at the 'crp_iv_start' offset. - CRYPTO_F_IV_GENERATE means that a random IV should be generated and stored into the data buffer. This cannot be used with CRYPTO_F_IV_SEPARATE. If a consumer wants to deal with explicit vs implicit IVs, etc. it can always generate the IV however it needs and store partial IVs in the buffer and the full IV/nonce in crp_iv and set CRYPTO_F_IV_SEPARATE. The layout of the buffer is now described via fields in cryptop. crp_aad_start and crp_aad_length define the boundaries of any AAD. Previously with GCM and CCM you defined an auth crd with this range, but for ETA your auth crd had to span both the AAD and plaintext (and they had to be adjacent). crp_payload_start and crp_payload_length define the boundaries of the plaintext/ciphertext. Modes that only do a single operation (COMPRESS, CIPHER, DIGEST) should only use this region and leave the AAD region empty. If a digest is present (or should be generated), it's starting location is marked by crp_digest_start. Instead of using the CRD_F_ENCRYPT flag to determine the direction of the operation, cryptop now includes an 'op' field defining the operation to perform. For digests I've added a new VERIFY digest mode which assumes a digest is present in the input and fails the request with EBADMSG if it doesn't match the internally-computed digest. GCM and CCM already assumed this, and the new AEAD mode requires this for decryption. The new ETA mode now also requires this for decryption, so IPsec and GELI no longer do their own authentication verification. Simple DIGEST operations can also do this, though there are no in-tree consumers. To eventually support some refcounting to close races, the session cookie is now passed to crypto_getop() and clients should no longer set crp_sesssion directly. - Assymteric crypto operation structures should be allocated via crypto_getkreq() and freed via crypto_freekreq(). This permits the crypto layer to track open asym requests and close races with a driver trying to unregister while asym requests are in flight. - crypto_copyback, crypto_copydata, crypto_apply, and crypto_contiguous_subsegment now accept the 'crp' object as the first parameter instead of individual members. This makes it easier to deal with different buffer types in the future as well as separate input and output buffers. It's also simpler for driver writers to use. - bus_dmamap_load_crp() loads a DMA mapping for a crypto buffer. This understands the various types of buffers so that drivers that use DMA do not have to be aware of different buffer types. - Helper routines now exist to build an auth context for HMAC IPAD and OPAD. This reduces some duplicated work among drivers. - Key buffers are now treated as const throughout the framework and in device drivers. However, session key buffers provided when a session is created are expected to remain alive for the duration of the session. - GCM and CCM sessions now only specify a cipher algorithm and a cipher key. The redundant auth information is not needed or used. - For cryptosoft, split up the code a bit such that the 'process' callback now invokes a function pointer in the session. This function pointer is set based on the mode (in effect) though it simplifies a few edge cases that would otherwise be in the switch in 'process'. It does split up GCM vs CCM which I think is more readable even if there is some duplication. - I changed /dev/crypto to support GMAC requests using CRYPTO_AES_NIST_GMAC as an auth algorithm and updated cryptocheck to work with it. - Combined cipher and auth sessions via /dev/crypto now always use ETA mode. The COP_F_CIPHER_FIRST flag is now a no-op that is ignored. This was actually documented as being true in crypto(4) before, but the code had not implemented this before I added the CIPHER_FIRST flag. - I have not yet updated /dev/crypto to be aware of explicit modes for sessions. I will probably do that at some point in the future as well as teach it about IV/nonce and tag lengths for AEAD so we can support all of the NIST KAT tests for GCM and CCM. - I've split up the exising crypto.9 manpage into several pages of which many are written from scratch. - I have converted all drivers and consumers in the tree and verified that they compile, but I have not tested all of them. I have tested the following drivers: - cryptosoft - aesni (AES only) - blake2 - ccr and the following consumers: - cryptodev - IPsec - ktls_ocf - GELI (lightly) I have not tested the following: - ccp - aesni with sha - hifn - kgssapi_krb5 - ubsec - padlock - safe - armv8_crypto (aarch64) - glxsb (i386) - sec (ppc) - cesa (armv7) - cryptocteon (mips64) - nlmsec (mips64) Discussed with: cem Relnotes: yes Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D23677
2020-03-27 18:25:23 +00:00
break;
#if CRYPTO_MAY_HAVE_VMPAGE
case CRYPTO_BUF_VMPAGE:
MPASS(size <= crp->crp_buf.cb_vm_page_len);
MPASS(size + off <= crp->crp_buf.cb_vm_page_len +
crp->crp_buf.cb_vm_page_offset);
cvm_page_copydata(crp->crp_buf.cb_vm_page,
off + crp->crp_buf.cb_vm_page_offset, size, dst);
break;
#endif /* CRYPTO_MAY_HAVE_VMPAGE */
Refactor driver and consumer interfaces for OCF (in-kernel crypto). - The linked list of cryptoini structures used in session initialization is replaced with a new flat structure: struct crypto_session_params. This session includes a new mode to define how the other fields should be interpreted. Available modes include: - COMPRESS (for compression/decompression) - CIPHER (for simply encryption/decryption) - DIGEST (computing and verifying digests) - AEAD (combined auth and encryption such as AES-GCM and AES-CCM) - ETA (combined auth and encryption using encrypt-then-authenticate) Additional modes could be added in the future (e.g. if we wanted to support TLS MtE for AES-CBC in the kernel we could add a new mode for that. TLS modes might also affect how AAD is interpreted, etc.) The flat structure also includes the key lengths and algorithms as before. However, code doesn't have to walk the linked list and switch on the algorithm to determine which key is the auth key vs encryption key. The 'csp_auth_*' fields are always used for auth keys and settings and 'csp_cipher_*' for cipher. (Compression algorithms are stored in csp_cipher_alg.) - Drivers no longer register a list of supported algorithms. This doesn't quite work when you factor in modes (e.g. a driver might support both AES-CBC and SHA2-256-HMAC separately but not combined for ETA). Instead, a new 'crypto_probesession' method has been added to the kobj interface for symmteric crypto drivers. This method returns a negative value on success (similar to how device_probe works) and the crypto framework uses this value to pick the "best" driver. There are three constants for hardware (e.g. ccr), accelerated software (e.g. aesni), and plain software (cryptosoft) that give preference in that order. One effect of this is that if you request only hardware when creating a new session, you will no longer get a session using accelerated software. Another effect is that the default setting to disallow software crypto via /dev/crypto now disables accelerated software. Once a driver is chosen, 'crypto_newsession' is invoked as before. - Crypto operations are now solely described by the flat 'cryptop' structure. The linked list of descriptors has been removed. A separate enum has been added to describe the type of data buffer in use instead of using CRYPTO_F_* flags to make it easier to add more types in the future if needed (e.g. wired userspace buffers for zero-copy). It will also make it easier to re-introduce separate input and output buffers (in-kernel TLS would benefit from this). Try to make the flags related to IV handling less insane: - CRYPTO_F_IV_SEPARATE means that the IV is stored in the 'crp_iv' member of the operation structure. If this flag is not set, the IV is stored in the data buffer at the 'crp_iv_start' offset. - CRYPTO_F_IV_GENERATE means that a random IV should be generated and stored into the data buffer. This cannot be used with CRYPTO_F_IV_SEPARATE. If a consumer wants to deal with explicit vs implicit IVs, etc. it can always generate the IV however it needs and store partial IVs in the buffer and the full IV/nonce in crp_iv and set CRYPTO_F_IV_SEPARATE. The layout of the buffer is now described via fields in cryptop. crp_aad_start and crp_aad_length define the boundaries of any AAD. Previously with GCM and CCM you defined an auth crd with this range, but for ETA your auth crd had to span both the AAD and plaintext (and they had to be adjacent). crp_payload_start and crp_payload_length define the boundaries of the plaintext/ciphertext. Modes that only do a single operation (COMPRESS, CIPHER, DIGEST) should only use this region and leave the AAD region empty. If a digest is present (or should be generated), it's starting location is marked by crp_digest_start. Instead of using the CRD_F_ENCRYPT flag to determine the direction of the operation, cryptop now includes an 'op' field defining the operation to perform. For digests I've added a new VERIFY digest mode which assumes a digest is present in the input and fails the request with EBADMSG if it doesn't match the internally-computed digest. GCM and CCM already assumed this, and the new AEAD mode requires this for decryption. The new ETA mode now also requires this for decryption, so IPsec and GELI no longer do their own authentication verification. Simple DIGEST operations can also do this, though there are no in-tree consumers. To eventually support some refcounting to close races, the session cookie is now passed to crypto_getop() and clients should no longer set crp_sesssion directly. - Assymteric crypto operation structures should be allocated via crypto_getkreq() and freed via crypto_freekreq(). This permits the crypto layer to track open asym requests and close races with a driver trying to unregister while asym requests are in flight. - crypto_copyback, crypto_copydata, crypto_apply, and crypto_contiguous_subsegment now accept the 'crp' object as the first parameter instead of individual members. This makes it easier to deal with different buffer types in the future as well as separate input and output buffers. It's also simpler for driver writers to use. - bus_dmamap_load_crp() loads a DMA mapping for a crypto buffer. This understands the various types of buffers so that drivers that use DMA do not have to be aware of different buffer types. - Helper routines now exist to build an auth context for HMAC IPAD and OPAD. This reduces some duplicated work among drivers. - Key buffers are now treated as const throughout the framework and in device drivers. However, session key buffers provided when a session is created are expected to remain alive for the duration of the session. - GCM and CCM sessions now only specify a cipher algorithm and a cipher key. The redundant auth information is not needed or used. - For cryptosoft, split up the code a bit such that the 'process' callback now invokes a function pointer in the session. This function pointer is set based on the mode (in effect) though it simplifies a few edge cases that would otherwise be in the switch in 'process'. It does split up GCM vs CCM which I think is more readable even if there is some duplication. - I changed /dev/crypto to support GMAC requests using CRYPTO_AES_NIST_GMAC as an auth algorithm and updated cryptocheck to work with it. - Combined cipher and auth sessions via /dev/crypto now always use ETA mode. The COP_F_CIPHER_FIRST flag is now a no-op that is ignored. This was actually documented as being true in crypto(4) before, but the code had not implemented this before I added the CIPHER_FIRST flag. - I have not yet updated /dev/crypto to be aware of explicit modes for sessions. I will probably do that at some point in the future as well as teach it about IV/nonce and tag lengths for AEAD so we can support all of the NIST KAT tests for GCM and CCM. - I've split up the exising crypto.9 manpage into several pages of which many are written from scratch. - I have converted all drivers and consumers in the tree and verified that they compile, but I have not tested all of them. I have tested the following drivers: - cryptosoft - aesni (AES only) - blake2 - ccr and the following consumers: - cryptodev - IPsec - ktls_ocf - GELI (lightly) I have not tested the following: - ccp - aesni with sha - hifn - kgssapi_krb5 - ubsec - padlock - safe - armv8_crypto (aarch64) - glxsb (i386) - sec (ppc) - cesa (armv7) - cryptocteon (mips64) - nlmsec (mips64) Discussed with: cem Relnotes: yes Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D23677
2020-03-27 18:25:23 +00:00
case CRYPTO_BUF_UIO:
Add support for optional separate output buffers to in-kernel crypto. Some crypto consumers such as GELI and KTLS for file-backed sendfile need to store their output in a separate buffer from the input. Currently these consumers copy the contents of the input buffer into the output buffer and queue an in-place crypto operation on the output buffer. Using a separate output buffer avoids this copy. - Create a new 'struct crypto_buffer' describing a crypto buffer containing a type and type-specific fields. crp_ilen is gone, instead buffers that use a flat kernel buffer have a cb_buf_len field for their length. The length of other buffer types is inferred from the backing store (e.g. uio_resid for a uio). Requests now have two such structures: crp_buf for the input buffer, and crp_obuf for the output buffer. - Consumers now use helper functions (crypto_use_*, e.g. crypto_use_mbuf()) to configure the input buffer. If an output buffer is not configured, the request still modifies the input buffer in-place. A consumer uses a second set of helper functions (crypto_use_output_*) to configure an output buffer. - Consumers must request support for separate output buffers when creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are only permitted to queue a request with a separate output buffer on sessions with this flag set. Existing drivers already reject sessions with unknown flags, so this permits drivers to be modified to support this extension without requiring all drivers to change. - Several data-related functions now have matching versions that operate on an explicit buffer (e.g. crypto_apply_buf, crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf). - Most of the existing data-related functions operate on the input buffer. However crypto_copyback always writes to the output buffer if a request uses a separate output buffer. - For the regions in input/output buffers, the following conventions are followed: - AAD and IV are always present in input only and their fields are offsets into the input buffer. - payload is always present in both buffers. If a request uses a separate output buffer, it must set a new crp_payload_start_output field to the offset of the payload in the output buffer. - digest is in the input buffer for verify operations, and in the output buffer for compute operations. crp_digest_start is relative to the appropriate buffer. - Add a crypto buffer cursor abstraction. This is a more general form of some bits in the cryptosoft driver that tried to always use uio's. However, compared to the original code, this avoids rewalking the uio iovec array for requests with multiple vectors. It also avoids allocate an iovec array for mbufs and populating it by instead walking the mbuf chain directly. - Update the cryptosoft(4) driver to support separate output buffers making use of the cursor abstraction. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D24545
2020-05-25 22:12:04 +00:00
cuio_copydata(crp->crp_buf.cb_uio, off, size, dst);
Refactor driver and consumer interfaces for OCF (in-kernel crypto). - The linked list of cryptoini structures used in session initialization is replaced with a new flat structure: struct crypto_session_params. This session includes a new mode to define how the other fields should be interpreted. Available modes include: - COMPRESS (for compression/decompression) - CIPHER (for simply encryption/decryption) - DIGEST (computing and verifying digests) - AEAD (combined auth and encryption such as AES-GCM and AES-CCM) - ETA (combined auth and encryption using encrypt-then-authenticate) Additional modes could be added in the future (e.g. if we wanted to support TLS MtE for AES-CBC in the kernel we could add a new mode for that. TLS modes might also affect how AAD is interpreted, etc.) The flat structure also includes the key lengths and algorithms as before. However, code doesn't have to walk the linked list and switch on the algorithm to determine which key is the auth key vs encryption key. The 'csp_auth_*' fields are always used for auth keys and settings and 'csp_cipher_*' for cipher. (Compression algorithms are stored in csp_cipher_alg.) - Drivers no longer register a list of supported algorithms. This doesn't quite work when you factor in modes (e.g. a driver might support both AES-CBC and SHA2-256-HMAC separately but not combined for ETA). Instead, a new 'crypto_probesession' method has been added to the kobj interface for symmteric crypto drivers. This method returns a negative value on success (similar to how device_probe works) and the crypto framework uses this value to pick the "best" driver. There are three constants for hardware (e.g. ccr), accelerated software (e.g. aesni), and plain software (cryptosoft) that give preference in that order. One effect of this is that if you request only hardware when creating a new session, you will no longer get a session using accelerated software. Another effect is that the default setting to disallow software crypto via /dev/crypto now disables accelerated software. Once a driver is chosen, 'crypto_newsession' is invoked as before. - Crypto operations are now solely described by the flat 'cryptop' structure. The linked list of descriptors has been removed. A separate enum has been added to describe the type of data buffer in use instead of using CRYPTO_F_* flags to make it easier to add more types in the future if needed (e.g. wired userspace buffers for zero-copy). It will also make it easier to re-introduce separate input and output buffers (in-kernel TLS would benefit from this). Try to make the flags related to IV handling less insane: - CRYPTO_F_IV_SEPARATE means that the IV is stored in the 'crp_iv' member of the operation structure. If this flag is not set, the IV is stored in the data buffer at the 'crp_iv_start' offset. - CRYPTO_F_IV_GENERATE means that a random IV should be generated and stored into the data buffer. This cannot be used with CRYPTO_F_IV_SEPARATE. If a consumer wants to deal with explicit vs implicit IVs, etc. it can always generate the IV however it needs and store partial IVs in the buffer and the full IV/nonce in crp_iv and set CRYPTO_F_IV_SEPARATE. The layout of the buffer is now described via fields in cryptop. crp_aad_start and crp_aad_length define the boundaries of any AAD. Previously with GCM and CCM you defined an auth crd with this range, but for ETA your auth crd had to span both the AAD and plaintext (and they had to be adjacent). crp_payload_start and crp_payload_length define the boundaries of the plaintext/ciphertext. Modes that only do a single operation (COMPRESS, CIPHER, DIGEST) should only use this region and leave the AAD region empty. If a digest is present (or should be generated), it's starting location is marked by crp_digest_start. Instead of using the CRD_F_ENCRYPT flag to determine the direction of the operation, cryptop now includes an 'op' field defining the operation to perform. For digests I've added a new VERIFY digest mode which assumes a digest is present in the input and fails the request with EBADMSG if it doesn't match the internally-computed digest. GCM and CCM already assumed this, and the new AEAD mode requires this for decryption. The new ETA mode now also requires this for decryption, so IPsec and GELI no longer do their own authentication verification. Simple DIGEST operations can also do this, though there are no in-tree consumers. To eventually support some refcounting to close races, the session cookie is now passed to crypto_getop() and clients should no longer set crp_sesssion directly. - Assymteric crypto operation structures should be allocated via crypto_getkreq() and freed via crypto_freekreq(). This permits the crypto layer to track open asym requests and close races with a driver trying to unregister while asym requests are in flight. - crypto_copyback, crypto_copydata, crypto_apply, and crypto_contiguous_subsegment now accept the 'crp' object as the first parameter instead of individual members. This makes it easier to deal with different buffer types in the future as well as separate input and output buffers. It's also simpler for driver writers to use. - bus_dmamap_load_crp() loads a DMA mapping for a crypto buffer. This understands the various types of buffers so that drivers that use DMA do not have to be aware of different buffer types. - Helper routines now exist to build an auth context for HMAC IPAD and OPAD. This reduces some duplicated work among drivers. - Key buffers are now treated as const throughout the framework and in device drivers. However, session key buffers provided when a session is created are expected to remain alive for the duration of the session. - GCM and CCM sessions now only specify a cipher algorithm and a cipher key. The redundant auth information is not needed or used. - For cryptosoft, split up the code a bit such that the 'process' callback now invokes a function pointer in the session. This function pointer is set based on the mode (in effect) though it simplifies a few edge cases that would otherwise be in the switch in 'process'. It does split up GCM vs CCM which I think is more readable even if there is some duplication. - I changed /dev/crypto to support GMAC requests using CRYPTO_AES_NIST_GMAC as an auth algorithm and updated cryptocheck to work with it. - Combined cipher and auth sessions via /dev/crypto now always use ETA mode. The COP_F_CIPHER_FIRST flag is now a no-op that is ignored. This was actually documented as being true in crypto(4) before, but the code had not implemented this before I added the CIPHER_FIRST flag. - I have not yet updated /dev/crypto to be aware of explicit modes for sessions. I will probably do that at some point in the future as well as teach it about IV/nonce and tag lengths for AEAD so we can support all of the NIST KAT tests for GCM and CCM. - I've split up the exising crypto.9 manpage into several pages of which many are written from scratch. - I have converted all drivers and consumers in the tree and verified that they compile, but I have not tested all of them. I have tested the following drivers: - cryptosoft - aesni (AES only) - blake2 - ccr and the following consumers: - cryptodev - IPsec - ktls_ocf - GELI (lightly) I have not tested the following: - ccp - aesni with sha - hifn - kgssapi_krb5 - ubsec - padlock - safe - armv8_crypto (aarch64) - glxsb (i386) - sec (ppc) - cesa (armv7) - cryptocteon (mips64) - nlmsec (mips64) Discussed with: cem Relnotes: yes Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D23677
2020-03-27 18:25:23 +00:00
break;
case CRYPTO_BUF_CONTIG:
Add support for optional separate output buffers to in-kernel crypto. Some crypto consumers such as GELI and KTLS for file-backed sendfile need to store their output in a separate buffer from the input. Currently these consumers copy the contents of the input buffer into the output buffer and queue an in-place crypto operation on the output buffer. Using a separate output buffer avoids this copy. - Create a new 'struct crypto_buffer' describing a crypto buffer containing a type and type-specific fields. crp_ilen is gone, instead buffers that use a flat kernel buffer have a cb_buf_len field for their length. The length of other buffer types is inferred from the backing store (e.g. uio_resid for a uio). Requests now have two such structures: crp_buf for the input buffer, and crp_obuf for the output buffer. - Consumers now use helper functions (crypto_use_*, e.g. crypto_use_mbuf()) to configure the input buffer. If an output buffer is not configured, the request still modifies the input buffer in-place. A consumer uses a second set of helper functions (crypto_use_output_*) to configure an output buffer. - Consumers must request support for separate output buffers when creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are only permitted to queue a request with a separate output buffer on sessions with this flag set. Existing drivers already reject sessions with unknown flags, so this permits drivers to be modified to support this extension without requiring all drivers to change. - Several data-related functions now have matching versions that operate on an explicit buffer (e.g. crypto_apply_buf, crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf). - Most of the existing data-related functions operate on the input buffer. However crypto_copyback always writes to the output buffer if a request uses a separate output buffer. - For the regions in input/output buffers, the following conventions are followed: - AAD and IV are always present in input only and their fields are offsets into the input buffer. - payload is always present in both buffers. If a request uses a separate output buffer, it must set a new crp_payload_start_output field to the offset of the payload in the output buffer. - digest is in the input buffer for verify operations, and in the output buffer for compute operations. crp_digest_start is relative to the appropriate buffer. - Add a crypto buffer cursor abstraction. This is a more general form of some bits in the cryptosoft driver that tried to always use uio's. However, compared to the original code, this avoids rewalking the uio iovec array for requests with multiple vectors. It also avoids allocate an iovec array for mbufs and populating it by instead walking the mbuf chain directly. - Update the cryptosoft(4) driver to support separate output buffers making use of the cursor abstraction. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D24545
2020-05-25 22:12:04 +00:00
MPASS(off + size <= crp->crp_buf.cb_buf_len);
bcopy(crp->crp_buf.cb_buf + off, dst, size);
Refactor driver and consumer interfaces for OCF (in-kernel crypto). - The linked list of cryptoini structures used in session initialization is replaced with a new flat structure: struct crypto_session_params. This session includes a new mode to define how the other fields should be interpreted. Available modes include: - COMPRESS (for compression/decompression) - CIPHER (for simply encryption/decryption) - DIGEST (computing and verifying digests) - AEAD (combined auth and encryption such as AES-GCM and AES-CCM) - ETA (combined auth and encryption using encrypt-then-authenticate) Additional modes could be added in the future (e.g. if we wanted to support TLS MtE for AES-CBC in the kernel we could add a new mode for that. TLS modes might also affect how AAD is interpreted, etc.) The flat structure also includes the key lengths and algorithms as before. However, code doesn't have to walk the linked list and switch on the algorithm to determine which key is the auth key vs encryption key. The 'csp_auth_*' fields are always used for auth keys and settings and 'csp_cipher_*' for cipher. (Compression algorithms are stored in csp_cipher_alg.) - Drivers no longer register a list of supported algorithms. This doesn't quite work when you factor in modes (e.g. a driver might support both AES-CBC and SHA2-256-HMAC separately but not combined for ETA). Instead, a new 'crypto_probesession' method has been added to the kobj interface for symmteric crypto drivers. This method returns a negative value on success (similar to how device_probe works) and the crypto framework uses this value to pick the "best" driver. There are three constants for hardware (e.g. ccr), accelerated software (e.g. aesni), and plain software (cryptosoft) that give preference in that order. One effect of this is that if you request only hardware when creating a new session, you will no longer get a session using accelerated software. Another effect is that the default setting to disallow software crypto via /dev/crypto now disables accelerated software. Once a driver is chosen, 'crypto_newsession' is invoked as before. - Crypto operations are now solely described by the flat 'cryptop' structure. The linked list of descriptors has been removed. A separate enum has been added to describe the type of data buffer in use instead of using CRYPTO_F_* flags to make it easier to add more types in the future if needed (e.g. wired userspace buffers for zero-copy). It will also make it easier to re-introduce separate input and output buffers (in-kernel TLS would benefit from this). Try to make the flags related to IV handling less insane: - CRYPTO_F_IV_SEPARATE means that the IV is stored in the 'crp_iv' member of the operation structure. If this flag is not set, the IV is stored in the data buffer at the 'crp_iv_start' offset. - CRYPTO_F_IV_GENERATE means that a random IV should be generated and stored into the data buffer. This cannot be used with CRYPTO_F_IV_SEPARATE. If a consumer wants to deal with explicit vs implicit IVs, etc. it can always generate the IV however it needs and store partial IVs in the buffer and the full IV/nonce in crp_iv and set CRYPTO_F_IV_SEPARATE. The layout of the buffer is now described via fields in cryptop. crp_aad_start and crp_aad_length define the boundaries of any AAD. Previously with GCM and CCM you defined an auth crd with this range, but for ETA your auth crd had to span both the AAD and plaintext (and they had to be adjacent). crp_payload_start and crp_payload_length define the boundaries of the plaintext/ciphertext. Modes that only do a single operation (COMPRESS, CIPHER, DIGEST) should only use this region and leave the AAD region empty. If a digest is present (or should be generated), it's starting location is marked by crp_digest_start. Instead of using the CRD_F_ENCRYPT flag to determine the direction of the operation, cryptop now includes an 'op' field defining the operation to perform. For digests I've added a new VERIFY digest mode which assumes a digest is present in the input and fails the request with EBADMSG if it doesn't match the internally-computed digest. GCM and CCM already assumed this, and the new AEAD mode requires this for decryption. The new ETA mode now also requires this for decryption, so IPsec and GELI no longer do their own authentication verification. Simple DIGEST operations can also do this, though there are no in-tree consumers. To eventually support some refcounting to close races, the session cookie is now passed to crypto_getop() and clients should no longer set crp_sesssion directly. - Assymteric crypto operation structures should be allocated via crypto_getkreq() and freed via crypto_freekreq(). This permits the crypto layer to track open asym requests and close races with a driver trying to unregister while asym requests are in flight. - crypto_copyback, crypto_copydata, crypto_apply, and crypto_contiguous_subsegment now accept the 'crp' object as the first parameter instead of individual members. This makes it easier to deal with different buffer types in the future as well as separate input and output buffers. It's also simpler for driver writers to use. - bus_dmamap_load_crp() loads a DMA mapping for a crypto buffer. This understands the various types of buffers so that drivers that use DMA do not have to be aware of different buffer types. - Helper routines now exist to build an auth context for HMAC IPAD and OPAD. This reduces some duplicated work among drivers. - Key buffers are now treated as const throughout the framework and in device drivers. However, session key buffers provided when a session is created are expected to remain alive for the duration of the session. - GCM and CCM sessions now only specify a cipher algorithm and a cipher key. The redundant auth information is not needed or used. - For cryptosoft, split up the code a bit such that the 'process' callback now invokes a function pointer in the session. This function pointer is set based on the mode (in effect) though it simplifies a few edge cases that would otherwise be in the switch in 'process'. It does split up GCM vs CCM which I think is more readable even if there is some duplication. - I changed /dev/crypto to support GMAC requests using CRYPTO_AES_NIST_GMAC as an auth algorithm and updated cryptocheck to work with it. - Combined cipher and auth sessions via /dev/crypto now always use ETA mode. The COP_F_CIPHER_FIRST flag is now a no-op that is ignored. This was actually documented as being true in crypto(4) before, but the code had not implemented this before I added the CIPHER_FIRST flag. - I have not yet updated /dev/crypto to be aware of explicit modes for sessions. I will probably do that at some point in the future as well as teach it about IV/nonce and tag lengths for AEAD so we can support all of the NIST KAT tests for GCM and CCM. - I've split up the exising crypto.9 manpage into several pages of which many are written from scratch. - I have converted all drivers and consumers in the tree and verified that they compile, but I have not tested all of them. I have tested the following drivers: - cryptosoft - aesni (AES only) - blake2 - ccr and the following consumers: - cryptodev - IPsec - ktls_ocf - GELI (lightly) I have not tested the following: - ccp - aesni with sha - hifn - kgssapi_krb5 - ubsec - padlock - safe - armv8_crypto (aarch64) - glxsb (i386) - sec (ppc) - cesa (armv7) - cryptocteon (mips64) - nlmsec (mips64) Discussed with: cem Relnotes: yes Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D23677
2020-03-27 18:25:23 +00:00
break;
default:
Add support for optional separate output buffers to in-kernel crypto. Some crypto consumers such as GELI and KTLS for file-backed sendfile need to store their output in a separate buffer from the input. Currently these consumers copy the contents of the input buffer into the output buffer and queue an in-place crypto operation on the output buffer. Using a separate output buffer avoids this copy. - Create a new 'struct crypto_buffer' describing a crypto buffer containing a type and type-specific fields. crp_ilen is gone, instead buffers that use a flat kernel buffer have a cb_buf_len field for their length. The length of other buffer types is inferred from the backing store (e.g. uio_resid for a uio). Requests now have two such structures: crp_buf for the input buffer, and crp_obuf for the output buffer. - Consumers now use helper functions (crypto_use_*, e.g. crypto_use_mbuf()) to configure the input buffer. If an output buffer is not configured, the request still modifies the input buffer in-place. A consumer uses a second set of helper functions (crypto_use_output_*) to configure an output buffer. - Consumers must request support for separate output buffers when creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are only permitted to queue a request with a separate output buffer on sessions with this flag set. Existing drivers already reject sessions with unknown flags, so this permits drivers to be modified to support this extension without requiring all drivers to change. - Several data-related functions now have matching versions that operate on an explicit buffer (e.g. crypto_apply_buf, crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf). - Most of the existing data-related functions operate on the input buffer. However crypto_copyback always writes to the output buffer if a request uses a separate output buffer. - For the regions in input/output buffers, the following conventions are followed: - AAD and IV are always present in input only and their fields are offsets into the input buffer. - payload is always present in both buffers. If a request uses a separate output buffer, it must set a new crp_payload_start_output field to the offset of the payload in the output buffer. - digest is in the input buffer for verify operations, and in the output buffer for compute operations. crp_digest_start is relative to the appropriate buffer. - Add a crypto buffer cursor abstraction. This is a more general form of some bits in the cryptosoft driver that tried to always use uio's. However, compared to the original code, this avoids rewalking the uio iovec array for requests with multiple vectors. It also avoids allocate an iovec array for mbufs and populating it by instead walking the mbuf chain directly. - Update the cryptosoft(4) driver to support separate output buffers making use of the cursor abstraction. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D24545
2020-05-25 22:12:04 +00:00
#ifdef INVARIANTS
panic("invalid crp buf type %d", crp->crp_buf.cb_type);
#endif
break;
Refactor driver and consumer interfaces for OCF (in-kernel crypto). - The linked list of cryptoini structures used in session initialization is replaced with a new flat structure: struct crypto_session_params. This session includes a new mode to define how the other fields should be interpreted. Available modes include: - COMPRESS (for compression/decompression) - CIPHER (for simply encryption/decryption) - DIGEST (computing and verifying digests) - AEAD (combined auth and encryption such as AES-GCM and AES-CCM) - ETA (combined auth and encryption using encrypt-then-authenticate) Additional modes could be added in the future (e.g. if we wanted to support TLS MtE for AES-CBC in the kernel we could add a new mode for that. TLS modes might also affect how AAD is interpreted, etc.) The flat structure also includes the key lengths and algorithms as before. However, code doesn't have to walk the linked list and switch on the algorithm to determine which key is the auth key vs encryption key. The 'csp_auth_*' fields are always used for auth keys and settings and 'csp_cipher_*' for cipher. (Compression algorithms are stored in csp_cipher_alg.) - Drivers no longer register a list of supported algorithms. This doesn't quite work when you factor in modes (e.g. a driver might support both AES-CBC and SHA2-256-HMAC separately but not combined for ETA). Instead, a new 'crypto_probesession' method has been added to the kobj interface for symmteric crypto drivers. This method returns a negative value on success (similar to how device_probe works) and the crypto framework uses this value to pick the "best" driver. There are three constants for hardware (e.g. ccr), accelerated software (e.g. aesni), and plain software (cryptosoft) that give preference in that order. One effect of this is that if you request only hardware when creating a new session, you will no longer get a session using accelerated software. Another effect is that the default setting to disallow software crypto via /dev/crypto now disables accelerated software. Once a driver is chosen, 'crypto_newsession' is invoked as before. - Crypto operations are now solely described by the flat 'cryptop' structure. The linked list of descriptors has been removed. A separate enum has been added to describe the type of data buffer in use instead of using CRYPTO_F_* flags to make it easier to add more types in the future if needed (e.g. wired userspace buffers for zero-copy). It will also make it easier to re-introduce separate input and output buffers (in-kernel TLS would benefit from this). Try to make the flags related to IV handling less insane: - CRYPTO_F_IV_SEPARATE means that the IV is stored in the 'crp_iv' member of the operation structure. If this flag is not set, the IV is stored in the data buffer at the 'crp_iv_start' offset. - CRYPTO_F_IV_GENERATE means that a random IV should be generated and stored into the data buffer. This cannot be used with CRYPTO_F_IV_SEPARATE. If a consumer wants to deal with explicit vs implicit IVs, etc. it can always generate the IV however it needs and store partial IVs in the buffer and the full IV/nonce in crp_iv and set CRYPTO_F_IV_SEPARATE. The layout of the buffer is now described via fields in cryptop. crp_aad_start and crp_aad_length define the boundaries of any AAD. Previously with GCM and CCM you defined an auth crd with this range, but for ETA your auth crd had to span both the AAD and plaintext (and they had to be adjacent). crp_payload_start and crp_payload_length define the boundaries of the plaintext/ciphertext. Modes that only do a single operation (COMPRESS, CIPHER, DIGEST) should only use this region and leave the AAD region empty. If a digest is present (or should be generated), it's starting location is marked by crp_digest_start. Instead of using the CRD_F_ENCRYPT flag to determine the direction of the operation, cryptop now includes an 'op' field defining the operation to perform. For digests I've added a new VERIFY digest mode which assumes a digest is present in the input and fails the request with EBADMSG if it doesn't match the internally-computed digest. GCM and CCM already assumed this, and the new AEAD mode requires this for decryption. The new ETA mode now also requires this for decryption, so IPsec and GELI no longer do their own authentication verification. Simple DIGEST operations can also do this, though there are no in-tree consumers. To eventually support some refcounting to close races, the session cookie is now passed to crypto_getop() and clients should no longer set crp_sesssion directly. - Assymteric crypto operation structures should be allocated via crypto_getkreq() and freed via crypto_freekreq(). This permits the crypto layer to track open asym requests and close races with a driver trying to unregister while asym requests are in flight. - crypto_copyback, crypto_copydata, crypto_apply, and crypto_contiguous_subsegment now accept the 'crp' object as the first parameter instead of individual members. This makes it easier to deal with different buffer types in the future as well as separate input and output buffers. It's also simpler for driver writers to use. - bus_dmamap_load_crp() loads a DMA mapping for a crypto buffer. This understands the various types of buffers so that drivers that use DMA do not have to be aware of different buffer types. - Helper routines now exist to build an auth context for HMAC IPAD and OPAD. This reduces some duplicated work among drivers. - Key buffers are now treated as const throughout the framework and in device drivers. However, session key buffers provided when a session is created are expected to remain alive for the duration of the session. - GCM and CCM sessions now only specify a cipher algorithm and a cipher key. The redundant auth information is not needed or used. - For cryptosoft, split up the code a bit such that the 'process' callback now invokes a function pointer in the session. This function pointer is set based on the mode (in effect) though it simplifies a few edge cases that would otherwise be in the switch in 'process'. It does split up GCM vs CCM which I think is more readable even if there is some duplication. - I changed /dev/crypto to support GMAC requests using CRYPTO_AES_NIST_GMAC as an auth algorithm and updated cryptocheck to work with it. - Combined cipher and auth sessions via /dev/crypto now always use ETA mode. The COP_F_CIPHER_FIRST flag is now a no-op that is ignored. This was actually documented as being true in crypto(4) before, but the code had not implemented this before I added the CIPHER_FIRST flag. - I have not yet updated /dev/crypto to be aware of explicit modes for sessions. I will probably do that at some point in the future as well as teach it about IV/nonce and tag lengths for AEAD so we can support all of the NIST KAT tests for GCM and CCM. - I've split up the exising crypto.9 manpage into several pages of which many are written from scratch. - I have converted all drivers and consumers in the tree and verified that they compile, but I have not tested all of them. I have tested the following drivers: - cryptosoft - aesni (AES only) - blake2 - ccr and the following consumers: - cryptodev - IPsec - ktls_ocf - GELI (lightly) I have not tested the following: - ccp - aesni with sha - hifn - kgssapi_krb5 - ubsec - padlock - safe - armv8_crypto (aarch64) - glxsb (i386) - sec (ppc) - cesa (armv7) - cryptocteon (mips64) - nlmsec (mips64) Discussed with: cem Relnotes: yes Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D23677
2020-03-27 18:25:23 +00:00
}
}
int
Add support for optional separate output buffers to in-kernel crypto. Some crypto consumers such as GELI and KTLS for file-backed sendfile need to store their output in a separate buffer from the input. Currently these consumers copy the contents of the input buffer into the output buffer and queue an in-place crypto operation on the output buffer. Using a separate output buffer avoids this copy. - Create a new 'struct crypto_buffer' describing a crypto buffer containing a type and type-specific fields. crp_ilen is gone, instead buffers that use a flat kernel buffer have a cb_buf_len field for their length. The length of other buffer types is inferred from the backing store (e.g. uio_resid for a uio). Requests now have two such structures: crp_buf for the input buffer, and crp_obuf for the output buffer. - Consumers now use helper functions (crypto_use_*, e.g. crypto_use_mbuf()) to configure the input buffer. If an output buffer is not configured, the request still modifies the input buffer in-place. A consumer uses a second set of helper functions (crypto_use_output_*) to configure an output buffer. - Consumers must request support for separate output buffers when creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are only permitted to queue a request with a separate output buffer on sessions with this flag set. Existing drivers already reject sessions with unknown flags, so this permits drivers to be modified to support this extension without requiring all drivers to change. - Several data-related functions now have matching versions that operate on an explicit buffer (e.g. crypto_apply_buf, crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf). - Most of the existing data-related functions operate on the input buffer. However crypto_copyback always writes to the output buffer if a request uses a separate output buffer. - For the regions in input/output buffers, the following conventions are followed: - AAD and IV are always present in input only and their fields are offsets into the input buffer. - payload is always present in both buffers. If a request uses a separate output buffer, it must set a new crp_payload_start_output field to the offset of the payload in the output buffer. - digest is in the input buffer for verify operations, and in the output buffer for compute operations. crp_digest_start is relative to the appropriate buffer. - Add a crypto buffer cursor abstraction. This is a more general form of some bits in the cryptosoft driver that tried to always use uio's. However, compared to the original code, this avoids rewalking the uio iovec array for requests with multiple vectors. It also avoids allocate an iovec array for mbufs and populating it by instead walking the mbuf chain directly. - Update the cryptosoft(4) driver to support separate output buffers making use of the cursor abstraction. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D24545
2020-05-25 22:12:04 +00:00
crypto_apply_buf(struct crypto_buffer *cb, int off, int len,
int (*f)(void *, const void *, u_int), void *arg)
{
int error;
Add support for optional separate output buffers to in-kernel crypto. Some crypto consumers such as GELI and KTLS for file-backed sendfile need to store their output in a separate buffer from the input. Currently these consumers copy the contents of the input buffer into the output buffer and queue an in-place crypto operation on the output buffer. Using a separate output buffer avoids this copy. - Create a new 'struct crypto_buffer' describing a crypto buffer containing a type and type-specific fields. crp_ilen is gone, instead buffers that use a flat kernel buffer have a cb_buf_len field for their length. The length of other buffer types is inferred from the backing store (e.g. uio_resid for a uio). Requests now have two such structures: crp_buf for the input buffer, and crp_obuf for the output buffer. - Consumers now use helper functions (crypto_use_*, e.g. crypto_use_mbuf()) to configure the input buffer. If an output buffer is not configured, the request still modifies the input buffer in-place. A consumer uses a second set of helper functions (crypto_use_output_*) to configure an output buffer. - Consumers must request support for separate output buffers when creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are only permitted to queue a request with a separate output buffer on sessions with this flag set. Existing drivers already reject sessions with unknown flags, so this permits drivers to be modified to support this extension without requiring all drivers to change. - Several data-related functions now have matching versions that operate on an explicit buffer (e.g. crypto_apply_buf, crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf). - Most of the existing data-related functions operate on the input buffer. However crypto_copyback always writes to the output buffer if a request uses a separate output buffer. - For the regions in input/output buffers, the following conventions are followed: - AAD and IV are always present in input only and their fields are offsets into the input buffer. - payload is always present in both buffers. If a request uses a separate output buffer, it must set a new crp_payload_start_output field to the offset of the payload in the output buffer. - digest is in the input buffer for verify operations, and in the output buffer for compute operations. crp_digest_start is relative to the appropriate buffer. - Add a crypto buffer cursor abstraction. This is a more general form of some bits in the cryptosoft driver that tried to always use uio's. However, compared to the original code, this avoids rewalking the uio iovec array for requests with multiple vectors. It also avoids allocate an iovec array for mbufs and populating it by instead walking the mbuf chain directly. - Update the cryptosoft(4) driver to support separate output buffers making use of the cursor abstraction. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D24545
2020-05-25 22:12:04 +00:00
switch (cb->cb_type) {
Refactor driver and consumer interfaces for OCF (in-kernel crypto). - The linked list of cryptoini structures used in session initialization is replaced with a new flat structure: struct crypto_session_params. This session includes a new mode to define how the other fields should be interpreted. Available modes include: - COMPRESS (for compression/decompression) - CIPHER (for simply encryption/decryption) - DIGEST (computing and verifying digests) - AEAD (combined auth and encryption such as AES-GCM and AES-CCM) - ETA (combined auth and encryption using encrypt-then-authenticate) Additional modes could be added in the future (e.g. if we wanted to support TLS MtE for AES-CBC in the kernel we could add a new mode for that. TLS modes might also affect how AAD is interpreted, etc.) The flat structure also includes the key lengths and algorithms as before. However, code doesn't have to walk the linked list and switch on the algorithm to determine which key is the auth key vs encryption key. The 'csp_auth_*' fields are always used for auth keys and settings and 'csp_cipher_*' for cipher. (Compression algorithms are stored in csp_cipher_alg.) - Drivers no longer register a list of supported algorithms. This doesn't quite work when you factor in modes (e.g. a driver might support both AES-CBC and SHA2-256-HMAC separately but not combined for ETA). Instead, a new 'crypto_probesession' method has been added to the kobj interface for symmteric crypto drivers. This method returns a negative value on success (similar to how device_probe works) and the crypto framework uses this value to pick the "best" driver. There are three constants for hardware (e.g. ccr), accelerated software (e.g. aesni), and plain software (cryptosoft) that give preference in that order. One effect of this is that if you request only hardware when creating a new session, you will no longer get a session using accelerated software. Another effect is that the default setting to disallow software crypto via /dev/crypto now disables accelerated software. Once a driver is chosen, 'crypto_newsession' is invoked as before. - Crypto operations are now solely described by the flat 'cryptop' structure. The linked list of descriptors has been removed. A separate enum has been added to describe the type of data buffer in use instead of using CRYPTO_F_* flags to make it easier to add more types in the future if needed (e.g. wired userspace buffers for zero-copy). It will also make it easier to re-introduce separate input and output buffers (in-kernel TLS would benefit from this). Try to make the flags related to IV handling less insane: - CRYPTO_F_IV_SEPARATE means that the IV is stored in the 'crp_iv' member of the operation structure. If this flag is not set, the IV is stored in the data buffer at the 'crp_iv_start' offset. - CRYPTO_F_IV_GENERATE means that a random IV should be generated and stored into the data buffer. This cannot be used with CRYPTO_F_IV_SEPARATE. If a consumer wants to deal with explicit vs implicit IVs, etc. it can always generate the IV however it needs and store partial IVs in the buffer and the full IV/nonce in crp_iv and set CRYPTO_F_IV_SEPARATE. The layout of the buffer is now described via fields in cryptop. crp_aad_start and crp_aad_length define the boundaries of any AAD. Previously with GCM and CCM you defined an auth crd with this range, but for ETA your auth crd had to span both the AAD and plaintext (and they had to be adjacent). crp_payload_start and crp_payload_length define the boundaries of the plaintext/ciphertext. Modes that only do a single operation (COMPRESS, CIPHER, DIGEST) should only use this region and leave the AAD region empty. If a digest is present (or should be generated), it's starting location is marked by crp_digest_start. Instead of using the CRD_F_ENCRYPT flag to determine the direction of the operation, cryptop now includes an 'op' field defining the operation to perform. For digests I've added a new VERIFY digest mode which assumes a digest is present in the input and fails the request with EBADMSG if it doesn't match the internally-computed digest. GCM and CCM already assumed this, and the new AEAD mode requires this for decryption. The new ETA mode now also requires this for decryption, so IPsec and GELI no longer do their own authentication verification. Simple DIGEST operations can also do this, though there are no in-tree consumers. To eventually support some refcounting to close races, the session cookie is now passed to crypto_getop() and clients should no longer set crp_sesssion directly. - Assymteric crypto operation structures should be allocated via crypto_getkreq() and freed via crypto_freekreq(). This permits the crypto layer to track open asym requests and close races with a driver trying to unregister while asym requests are in flight. - crypto_copyback, crypto_copydata, crypto_apply, and crypto_contiguous_subsegment now accept the 'crp' object as the first parameter instead of individual members. This makes it easier to deal with different buffer types in the future as well as separate input and output buffers. It's also simpler for driver writers to use. - bus_dmamap_load_crp() loads a DMA mapping for a crypto buffer. This understands the various types of buffers so that drivers that use DMA do not have to be aware of different buffer types. - Helper routines now exist to build an auth context for HMAC IPAD and OPAD. This reduces some duplicated work among drivers. - Key buffers are now treated as const throughout the framework and in device drivers. However, session key buffers provided when a session is created are expected to remain alive for the duration of the session. - GCM and CCM sessions now only specify a cipher algorithm and a cipher key. The redundant auth information is not needed or used. - For cryptosoft, split up the code a bit such that the 'process' callback now invokes a function pointer in the session. This function pointer is set based on the mode (in effect) though it simplifies a few edge cases that would otherwise be in the switch in 'process'. It does split up GCM vs CCM which I think is more readable even if there is some duplication. - I changed /dev/crypto to support GMAC requests using CRYPTO_AES_NIST_GMAC as an auth algorithm and updated cryptocheck to work with it. - Combined cipher and auth sessions via /dev/crypto now always use ETA mode. The COP_F_CIPHER_FIRST flag is now a no-op that is ignored. This was actually documented as being true in crypto(4) before, but the code had not implemented this before I added the CIPHER_FIRST flag. - I have not yet updated /dev/crypto to be aware of explicit modes for sessions. I will probably do that at some point in the future as well as teach it about IV/nonce and tag lengths for AEAD so we can support all of the NIST KAT tests for GCM and CCM. - I've split up the exising crypto.9 manpage into several pages of which many are written from scratch. - I have converted all drivers and consumers in the tree and verified that they compile, but I have not tested all of them. I have tested the following drivers: - cryptosoft - aesni (AES only) - blake2 - ccr and the following consumers: - cryptodev - IPsec - ktls_ocf - GELI (lightly) I have not tested the following: - ccp - aesni with sha - hifn - kgssapi_krb5 - ubsec - padlock - safe - armv8_crypto (aarch64) - glxsb (i386) - sec (ppc) - cesa (armv7) - cryptocteon (mips64) - nlmsec (mips64) Discussed with: cem Relnotes: yes Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D23677
2020-03-27 18:25:23 +00:00
case CRYPTO_BUF_MBUF:
case CRYPTO_BUF_SINGLE_MBUF:
error = m_apply(cb->cb_mbuf, off, len,
(int (*)(void *, void *, u_int))f, arg);
Refactor driver and consumer interfaces for OCF (in-kernel crypto). - The linked list of cryptoini structures used in session initialization is replaced with a new flat structure: struct crypto_session_params. This session includes a new mode to define how the other fields should be interpreted. Available modes include: - COMPRESS (for compression/decompression) - CIPHER (for simply encryption/decryption) - DIGEST (computing and verifying digests) - AEAD (combined auth and encryption such as AES-GCM and AES-CCM) - ETA (combined auth and encryption using encrypt-then-authenticate) Additional modes could be added in the future (e.g. if we wanted to support TLS MtE for AES-CBC in the kernel we could add a new mode for that. TLS modes might also affect how AAD is interpreted, etc.) The flat structure also includes the key lengths and algorithms as before. However, code doesn't have to walk the linked list and switch on the algorithm to determine which key is the auth key vs encryption key. The 'csp_auth_*' fields are always used for auth keys and settings and 'csp_cipher_*' for cipher. (Compression algorithms are stored in csp_cipher_alg.) - Drivers no longer register a list of supported algorithms. This doesn't quite work when you factor in modes (e.g. a driver might support both AES-CBC and SHA2-256-HMAC separately but not combined for ETA). Instead, a new 'crypto_probesession' method has been added to the kobj interface for symmteric crypto drivers. This method returns a negative value on success (similar to how device_probe works) and the crypto framework uses this value to pick the "best" driver. There are three constants for hardware (e.g. ccr), accelerated software (e.g. aesni), and plain software (cryptosoft) that give preference in that order. One effect of this is that if you request only hardware when creating a new session, you will no longer get a session using accelerated software. Another effect is that the default setting to disallow software crypto via /dev/crypto now disables accelerated software. Once a driver is chosen, 'crypto_newsession' is invoked as before. - Crypto operations are now solely described by the flat 'cryptop' structure. The linked list of descriptors has been removed. A separate enum has been added to describe the type of data buffer in use instead of using CRYPTO_F_* flags to make it easier to add more types in the future if needed (e.g. wired userspace buffers for zero-copy). It will also make it easier to re-introduce separate input and output buffers (in-kernel TLS would benefit from this). Try to make the flags related to IV handling less insane: - CRYPTO_F_IV_SEPARATE means that the IV is stored in the 'crp_iv' member of the operation structure. If this flag is not set, the IV is stored in the data buffer at the 'crp_iv_start' offset. - CRYPTO_F_IV_GENERATE means that a random IV should be generated and stored into the data buffer. This cannot be used with CRYPTO_F_IV_SEPARATE. If a consumer wants to deal with explicit vs implicit IVs, etc. it can always generate the IV however it needs and store partial IVs in the buffer and the full IV/nonce in crp_iv and set CRYPTO_F_IV_SEPARATE. The layout of the buffer is now described via fields in cryptop. crp_aad_start and crp_aad_length define the boundaries of any AAD. Previously with GCM and CCM you defined an auth crd with this range, but for ETA your auth crd had to span both the AAD and plaintext (and they had to be adjacent). crp_payload_start and crp_payload_length define the boundaries of the plaintext/ciphertext. Modes that only do a single operation (COMPRESS, CIPHER, DIGEST) should only use this region and leave the AAD region empty. If a digest is present (or should be generated), it's starting location is marked by crp_digest_start. Instead of using the CRD_F_ENCRYPT flag to determine the direction of the operation, cryptop now includes an 'op' field defining the operation to perform. For digests I've added a new VERIFY digest mode which assumes a digest is present in the input and fails the request with EBADMSG if it doesn't match the internally-computed digest. GCM and CCM already assumed this, and the new AEAD mode requires this for decryption. The new ETA mode now also requires this for decryption, so IPsec and GELI no longer do their own authentication verification. Simple DIGEST operations can also do this, though there are no in-tree consumers. To eventually support some refcounting to close races, the session cookie is now passed to crypto_getop() and clients should no longer set crp_sesssion directly. - Assymteric crypto operation structures should be allocated via crypto_getkreq() and freed via crypto_freekreq(). This permits the crypto layer to track open asym requests and close races with a driver trying to unregister while asym requests are in flight. - crypto_copyback, crypto_copydata, crypto_apply, and crypto_contiguous_subsegment now accept the 'crp' object as the first parameter instead of individual members. This makes it easier to deal with different buffer types in the future as well as separate input and output buffers. It's also simpler for driver writers to use. - bus_dmamap_load_crp() loads a DMA mapping for a crypto buffer. This understands the various types of buffers so that drivers that use DMA do not have to be aware of different buffer types. - Helper routines now exist to build an auth context for HMAC IPAD and OPAD. This reduces some duplicated work among drivers. - Key buffers are now treated as const throughout the framework and in device drivers. However, session key buffers provided when a session is created are expected to remain alive for the duration of the session. - GCM and CCM sessions now only specify a cipher algorithm and a cipher key. The redundant auth information is not needed or used. - For cryptosoft, split up the code a bit such that the 'process' callback now invokes a function pointer in the session. This function pointer is set based on the mode (in effect) though it simplifies a few edge cases that would otherwise be in the switch in 'process'. It does split up GCM vs CCM which I think is more readable even if there is some duplication. - I changed /dev/crypto to support GMAC requests using CRYPTO_AES_NIST_GMAC as an auth algorithm and updated cryptocheck to work with it. - Combined cipher and auth sessions via /dev/crypto now always use ETA mode. The COP_F_CIPHER_FIRST flag is now a no-op that is ignored. This was actually documented as being true in crypto(4) before, but the code had not implemented this before I added the CIPHER_FIRST flag. - I have not yet updated /dev/crypto to be aware of explicit modes for sessions. I will probably do that at some point in the future as well as teach it about IV/nonce and tag lengths for AEAD so we can support all of the NIST KAT tests for GCM and CCM. - I've split up the exising crypto.9 manpage into several pages of which many are written from scratch. - I have converted all drivers and consumers in the tree and verified that they compile, but I have not tested all of them. I have tested the following drivers: - cryptosoft - aesni (AES only) - blake2 - ccr and the following consumers: - cryptodev - IPsec - ktls_ocf - GELI (lightly) I have not tested the following: - ccp - aesni with sha - hifn - kgssapi_krb5 - ubsec - padlock - safe - armv8_crypto (aarch64) - glxsb (i386) - sec (ppc) - cesa (armv7) - cryptocteon (mips64) - nlmsec (mips64) Discussed with: cem Relnotes: yes Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D23677
2020-03-27 18:25:23 +00:00
break;
case CRYPTO_BUF_UIO:
Add support for optional separate output buffers to in-kernel crypto. Some crypto consumers such as GELI and KTLS for file-backed sendfile need to store their output in a separate buffer from the input. Currently these consumers copy the contents of the input buffer into the output buffer and queue an in-place crypto operation on the output buffer. Using a separate output buffer avoids this copy. - Create a new 'struct crypto_buffer' describing a crypto buffer containing a type and type-specific fields. crp_ilen is gone, instead buffers that use a flat kernel buffer have a cb_buf_len field for their length. The length of other buffer types is inferred from the backing store (e.g. uio_resid for a uio). Requests now have two such structures: crp_buf for the input buffer, and crp_obuf for the output buffer. - Consumers now use helper functions (crypto_use_*, e.g. crypto_use_mbuf()) to configure the input buffer. If an output buffer is not configured, the request still modifies the input buffer in-place. A consumer uses a second set of helper functions (crypto_use_output_*) to configure an output buffer. - Consumers must request support for separate output buffers when creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are only permitted to queue a request with a separate output buffer on sessions with this flag set. Existing drivers already reject sessions with unknown flags, so this permits drivers to be modified to support this extension without requiring all drivers to change. - Several data-related functions now have matching versions that operate on an explicit buffer (e.g. crypto_apply_buf, crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf). - Most of the existing data-related functions operate on the input buffer. However crypto_copyback always writes to the output buffer if a request uses a separate output buffer. - For the regions in input/output buffers, the following conventions are followed: - AAD and IV are always present in input only and their fields are offsets into the input buffer. - payload is always present in both buffers. If a request uses a separate output buffer, it must set a new crp_payload_start_output field to the offset of the payload in the output buffer. - digest is in the input buffer for verify operations, and in the output buffer for compute operations. crp_digest_start is relative to the appropriate buffer. - Add a crypto buffer cursor abstraction. This is a more general form of some bits in the cryptosoft driver that tried to always use uio's. However, compared to the original code, this avoids rewalking the uio iovec array for requests with multiple vectors. It also avoids allocate an iovec array for mbufs and populating it by instead walking the mbuf chain directly. - Update the cryptosoft(4) driver to support separate output buffers making use of the cursor abstraction. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D24545
2020-05-25 22:12:04 +00:00
error = cuio_apply(cb->cb_uio, off, len, f, arg);
Refactor driver and consumer interfaces for OCF (in-kernel crypto). - The linked list of cryptoini structures used in session initialization is replaced with a new flat structure: struct crypto_session_params. This session includes a new mode to define how the other fields should be interpreted. Available modes include: - COMPRESS (for compression/decompression) - CIPHER (for simply encryption/decryption) - DIGEST (computing and verifying digests) - AEAD (combined auth and encryption such as AES-GCM and AES-CCM) - ETA (combined auth and encryption using encrypt-then-authenticate) Additional modes could be added in the future (e.g. if we wanted to support TLS MtE for AES-CBC in the kernel we could add a new mode for that. TLS modes might also affect how AAD is interpreted, etc.) The flat structure also includes the key lengths and algorithms as before. However, code doesn't have to walk the linked list and switch on the algorithm to determine which key is the auth key vs encryption key. The 'csp_auth_*' fields are always used for auth keys and settings and 'csp_cipher_*' for cipher. (Compression algorithms are stored in csp_cipher_alg.) - Drivers no longer register a list of supported algorithms. This doesn't quite work when you factor in modes (e.g. a driver might support both AES-CBC and SHA2-256-HMAC separately but not combined for ETA). Instead, a new 'crypto_probesession' method has been added to the kobj interface for symmteric crypto drivers. This method returns a negative value on success (similar to how device_probe works) and the crypto framework uses this value to pick the "best" driver. There are three constants for hardware (e.g. ccr), accelerated software (e.g. aesni), and plain software (cryptosoft) that give preference in that order. One effect of this is that if you request only hardware when creating a new session, you will no longer get a session using accelerated software. Another effect is that the default setting to disallow software crypto via /dev/crypto now disables accelerated software. Once a driver is chosen, 'crypto_newsession' is invoked as before. - Crypto operations are now solely described by the flat 'cryptop' structure. The linked list of descriptors has been removed. A separate enum has been added to describe the type of data buffer in use instead of using CRYPTO_F_* flags to make it easier to add more types in the future if needed (e.g. wired userspace buffers for zero-copy). It will also make it easier to re-introduce separate input and output buffers (in-kernel TLS would benefit from this). Try to make the flags related to IV handling less insane: - CRYPTO_F_IV_SEPARATE means that the IV is stored in the 'crp_iv' member of the operation structure. If this flag is not set, the IV is stored in the data buffer at the 'crp_iv_start' offset. - CRYPTO_F_IV_GENERATE means that a random IV should be generated and stored into the data buffer. This cannot be used with CRYPTO_F_IV_SEPARATE. If a consumer wants to deal with explicit vs implicit IVs, etc. it can always generate the IV however it needs and store partial IVs in the buffer and the full IV/nonce in crp_iv and set CRYPTO_F_IV_SEPARATE. The layout of the buffer is now described via fields in cryptop. crp_aad_start and crp_aad_length define the boundaries of any AAD. Previously with GCM and CCM you defined an auth crd with this range, but for ETA your auth crd had to span both the AAD and plaintext (and they had to be adjacent). crp_payload_start and crp_payload_length define the boundaries of the plaintext/ciphertext. Modes that only do a single operation (COMPRESS, CIPHER, DIGEST) should only use this region and leave the AAD region empty. If a digest is present (or should be generated), it's starting location is marked by crp_digest_start. Instead of using the CRD_F_ENCRYPT flag to determine the direction of the operation, cryptop now includes an 'op' field defining the operation to perform. For digests I've added a new VERIFY digest mode which assumes a digest is present in the input and fails the request with EBADMSG if it doesn't match the internally-computed digest. GCM and CCM already assumed this, and the new AEAD mode requires this for decryption. The new ETA mode now also requires this for decryption, so IPsec and GELI no longer do their own authentication verification. Simple DIGEST operations can also do this, though there are no in-tree consumers. To eventually support some refcounting to close races, the session cookie is now passed to crypto_getop() and clients should no longer set crp_sesssion directly. - Assymteric crypto operation structures should be allocated via crypto_getkreq() and freed via crypto_freekreq(). This permits the crypto layer to track open asym requests and close races with a driver trying to unregister while asym requests are in flight. - crypto_copyback, crypto_copydata, crypto_apply, and crypto_contiguous_subsegment now accept the 'crp' object as the first parameter instead of individual members. This makes it easier to deal with different buffer types in the future as well as separate input and output buffers. It's also simpler for driver writers to use. - bus_dmamap_load_crp() loads a DMA mapping for a crypto buffer. This understands the various types of buffers so that drivers that use DMA do not have to be aware of different buffer types. - Helper routines now exist to build an auth context for HMAC IPAD and OPAD. This reduces some duplicated work among drivers. - Key buffers are now treated as const throughout the framework and in device drivers. However, session key buffers provided when a session is created are expected to remain alive for the duration of the session. - GCM and CCM sessions now only specify a cipher algorithm and a cipher key. The redundant auth information is not needed or used. - For cryptosoft, split up the code a bit such that the 'process' callback now invokes a function pointer in the session. This function pointer is set based on the mode (in effect) though it simplifies a few edge cases that would otherwise be in the switch in 'process'. It does split up GCM vs CCM which I think is more readable even if there is some duplication. - I changed /dev/crypto to support GMAC requests using CRYPTO_AES_NIST_GMAC as an auth algorithm and updated cryptocheck to work with it. - Combined cipher and auth sessions via /dev/crypto now always use ETA mode. The COP_F_CIPHER_FIRST flag is now a no-op that is ignored. This was actually documented as being true in crypto(4) before, but the code had not implemented this before I added the CIPHER_FIRST flag. - I have not yet updated /dev/crypto to be aware of explicit modes for sessions. I will probably do that at some point in the future as well as teach it about IV/nonce and tag lengths for AEAD so we can support all of the NIST KAT tests for GCM and CCM. - I've split up the exising crypto.9 manpage into several pages of which many are written from scratch. - I have converted all drivers and consumers in the tree and verified that they compile, but I have not tested all of them. I have tested the following drivers: - cryptosoft - aesni (AES only) - blake2 - ccr and the following consumers: - cryptodev - IPsec - ktls_ocf - GELI (lightly) I have not tested the following: - ccp - aesni with sha - hifn - kgssapi_krb5 - ubsec - padlock - safe - armv8_crypto (aarch64) - glxsb (i386) - sec (ppc) - cesa (armv7) - cryptocteon (mips64) - nlmsec (mips64) Discussed with: cem Relnotes: yes Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D23677
2020-03-27 18:25:23 +00:00
break;
#if CRYPTO_MAY_HAVE_VMPAGE
case CRYPTO_BUF_VMPAGE:
error = cvm_page_apply(cb->cb_vm_page,
off + cb->cb_vm_page_offset, len, f, arg);
break;
#endif /* CRYPTO_MAY_HAVE_VMPAGE */
Refactor driver and consumer interfaces for OCF (in-kernel crypto). - The linked list of cryptoini structures used in session initialization is replaced with a new flat structure: struct crypto_session_params. This session includes a new mode to define how the other fields should be interpreted. Available modes include: - COMPRESS (for compression/decompression) - CIPHER (for simply encryption/decryption) - DIGEST (computing and verifying digests) - AEAD (combined auth and encryption such as AES-GCM and AES-CCM) - ETA (combined auth and encryption using encrypt-then-authenticate) Additional modes could be added in the future (e.g. if we wanted to support TLS MtE for AES-CBC in the kernel we could add a new mode for that. TLS modes might also affect how AAD is interpreted, etc.) The flat structure also includes the key lengths and algorithms as before. However, code doesn't have to walk the linked list and switch on the algorithm to determine which key is the auth key vs encryption key. The 'csp_auth_*' fields are always used for auth keys and settings and 'csp_cipher_*' for cipher. (Compression algorithms are stored in csp_cipher_alg.) - Drivers no longer register a list of supported algorithms. This doesn't quite work when you factor in modes (e.g. a driver might support both AES-CBC and SHA2-256-HMAC separately but not combined for ETA). Instead, a new 'crypto_probesession' method has been added to the kobj interface for symmteric crypto drivers. This method returns a negative value on success (similar to how device_probe works) and the crypto framework uses this value to pick the "best" driver. There are three constants for hardware (e.g. ccr), accelerated software (e.g. aesni), and plain software (cryptosoft) that give preference in that order. One effect of this is that if you request only hardware when creating a new session, you will no longer get a session using accelerated software. Another effect is that the default setting to disallow software crypto via /dev/crypto now disables accelerated software. Once a driver is chosen, 'crypto_newsession' is invoked as before. - Crypto operations are now solely described by the flat 'cryptop' structure. The linked list of descriptors has been removed. A separate enum has been added to describe the type of data buffer in use instead of using CRYPTO_F_* flags to make it easier to add more types in the future if needed (e.g. wired userspace buffers for zero-copy). It will also make it easier to re-introduce separate input and output buffers (in-kernel TLS would benefit from this). Try to make the flags related to IV handling less insane: - CRYPTO_F_IV_SEPARATE means that the IV is stored in the 'crp_iv' member of the operation structure. If this flag is not set, the IV is stored in the data buffer at the 'crp_iv_start' offset. - CRYPTO_F_IV_GENERATE means that a random IV should be generated and stored into the data buffer. This cannot be used with CRYPTO_F_IV_SEPARATE. If a consumer wants to deal with explicit vs implicit IVs, etc. it can always generate the IV however it needs and store partial IVs in the buffer and the full IV/nonce in crp_iv and set CRYPTO_F_IV_SEPARATE. The layout of the buffer is now described via fields in cryptop. crp_aad_start and crp_aad_length define the boundaries of any AAD. Previously with GCM and CCM you defined an auth crd with this range, but for ETA your auth crd had to span both the AAD and plaintext (and they had to be adjacent). crp_payload_start and crp_payload_length define the boundaries of the plaintext/ciphertext. Modes that only do a single operation (COMPRESS, CIPHER, DIGEST) should only use this region and leave the AAD region empty. If a digest is present (or should be generated), it's starting location is marked by crp_digest_start. Instead of using the CRD_F_ENCRYPT flag to determine the direction of the operation, cryptop now includes an 'op' field defining the operation to perform. For digests I've added a new VERIFY digest mode which assumes a digest is present in the input and fails the request with EBADMSG if it doesn't match the internally-computed digest. GCM and CCM already assumed this, and the new AEAD mode requires this for decryption. The new ETA mode now also requires this for decryption, so IPsec and GELI no longer do their own authentication verification. Simple DIGEST operations can also do this, though there are no in-tree consumers. To eventually support some refcounting to close races, the session cookie is now passed to crypto_getop() and clients should no longer set crp_sesssion directly. - Assymteric crypto operation structures should be allocated via crypto_getkreq() and freed via crypto_freekreq(). This permits the crypto layer to track open asym requests and close races with a driver trying to unregister while asym requests are in flight. - crypto_copyback, crypto_copydata, crypto_apply, and crypto_contiguous_subsegment now accept the 'crp' object as the first parameter instead of individual members. This makes it easier to deal with different buffer types in the future as well as separate input and output buffers. It's also simpler for driver writers to use. - bus_dmamap_load_crp() loads a DMA mapping for a crypto buffer. This understands the various types of buffers so that drivers that use DMA do not have to be aware of different buffer types. - Helper routines now exist to build an auth context for HMAC IPAD and OPAD. This reduces some duplicated work among drivers. - Key buffers are now treated as const throughout the framework and in device drivers. However, session key buffers provided when a session is created are expected to remain alive for the duration of the session. - GCM and CCM sessions now only specify a cipher algorithm and a cipher key. The redundant auth information is not needed or used. - For cryptosoft, split up the code a bit such that the 'process' callback now invokes a function pointer in the session. This function pointer is set based on the mode (in effect) though it simplifies a few edge cases that would otherwise be in the switch in 'process'. It does split up GCM vs CCM which I think is more readable even if there is some duplication. - I changed /dev/crypto to support GMAC requests using CRYPTO_AES_NIST_GMAC as an auth algorithm and updated cryptocheck to work with it. - Combined cipher and auth sessions via /dev/crypto now always use ETA mode. The COP_F_CIPHER_FIRST flag is now a no-op that is ignored. This was actually documented as being true in crypto(4) before, but the code had not implemented this before I added the CIPHER_FIRST flag. - I have not yet updated /dev/crypto to be aware of explicit modes for sessions. I will probably do that at some point in the future as well as teach it about IV/nonce and tag lengths for AEAD so we can support all of the NIST KAT tests for GCM and CCM. - I've split up the exising crypto.9 manpage into several pages of which many are written from scratch. - I have converted all drivers and consumers in the tree and verified that they compile, but I have not tested all of them. I have tested the following drivers: - cryptosoft - aesni (AES only) - blake2 - ccr and the following consumers: - cryptodev - IPsec - ktls_ocf - GELI (lightly) I have not tested the following: - ccp - aesni with sha - hifn - kgssapi_krb5 - ubsec - padlock - safe - armv8_crypto (aarch64) - glxsb (i386) - sec (ppc) - cesa (armv7) - cryptocteon (mips64) - nlmsec (mips64) Discussed with: cem Relnotes: yes Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D23677
2020-03-27 18:25:23 +00:00
case CRYPTO_BUF_CONTIG:
Add support for optional separate output buffers to in-kernel crypto. Some crypto consumers such as GELI and KTLS for file-backed sendfile need to store their output in a separate buffer from the input. Currently these consumers copy the contents of the input buffer into the output buffer and queue an in-place crypto operation on the output buffer. Using a separate output buffer avoids this copy. - Create a new 'struct crypto_buffer' describing a crypto buffer containing a type and type-specific fields. crp_ilen is gone, instead buffers that use a flat kernel buffer have a cb_buf_len field for their length. The length of other buffer types is inferred from the backing store (e.g. uio_resid for a uio). Requests now have two such structures: crp_buf for the input buffer, and crp_obuf for the output buffer. - Consumers now use helper functions (crypto_use_*, e.g. crypto_use_mbuf()) to configure the input buffer. If an output buffer is not configured, the request still modifies the input buffer in-place. A consumer uses a second set of helper functions (crypto_use_output_*) to configure an output buffer. - Consumers must request support for separate output buffers when creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are only permitted to queue a request with a separate output buffer on sessions with this flag set. Existing drivers already reject sessions with unknown flags, so this permits drivers to be modified to support this extension without requiring all drivers to change. - Several data-related functions now have matching versions that operate on an explicit buffer (e.g. crypto_apply_buf, crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf). - Most of the existing data-related functions operate on the input buffer. However crypto_copyback always writes to the output buffer if a request uses a separate output buffer. - For the regions in input/output buffers, the following conventions are followed: - AAD and IV are always present in input only and their fields are offsets into the input buffer. - payload is always present in both buffers. If a request uses a separate output buffer, it must set a new crp_payload_start_output field to the offset of the payload in the output buffer. - digest is in the input buffer for verify operations, and in the output buffer for compute operations. crp_digest_start is relative to the appropriate buffer. - Add a crypto buffer cursor abstraction. This is a more general form of some bits in the cryptosoft driver that tried to always use uio's. However, compared to the original code, this avoids rewalking the uio iovec array for requests with multiple vectors. It also avoids allocate an iovec array for mbufs and populating it by instead walking the mbuf chain directly. - Update the cryptosoft(4) driver to support separate output buffers making use of the cursor abstraction. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D24545
2020-05-25 22:12:04 +00:00
MPASS(off + len <= cb->cb_buf_len);
error = (*f)(arg, cb->cb_buf + off, len);
Refactor driver and consumer interfaces for OCF (in-kernel crypto). - The linked list of cryptoini structures used in session initialization is replaced with a new flat structure: struct crypto_session_params. This session includes a new mode to define how the other fields should be interpreted. Available modes include: - COMPRESS (for compression/decompression) - CIPHER (for simply encryption/decryption) - DIGEST (computing and verifying digests) - AEAD (combined auth and encryption such as AES-GCM and AES-CCM) - ETA (combined auth and encryption using encrypt-then-authenticate) Additional modes could be added in the future (e.g. if we wanted to support TLS MtE for AES-CBC in the kernel we could add a new mode for that. TLS modes might also affect how AAD is interpreted, etc.) The flat structure also includes the key lengths and algorithms as before. However, code doesn't have to walk the linked list and switch on the algorithm to determine which key is the auth key vs encryption key. The 'csp_auth_*' fields are always used for auth keys and settings and 'csp_cipher_*' for cipher. (Compression algorithms are stored in csp_cipher_alg.) - Drivers no longer register a list of supported algorithms. This doesn't quite work when you factor in modes (e.g. a driver might support both AES-CBC and SHA2-256-HMAC separately but not combined for ETA). Instead, a new 'crypto_probesession' method has been added to the kobj interface for symmteric crypto drivers. This method returns a negative value on success (similar to how device_probe works) and the crypto framework uses this value to pick the "best" driver. There are three constants for hardware (e.g. ccr), accelerated software (e.g. aesni), and plain software (cryptosoft) that give preference in that order. One effect of this is that if you request only hardware when creating a new session, you will no longer get a session using accelerated software. Another effect is that the default setting to disallow software crypto via /dev/crypto now disables accelerated software. Once a driver is chosen, 'crypto_newsession' is invoked as before. - Crypto operations are now solely described by the flat 'cryptop' structure. The linked list of descriptors has been removed. A separate enum has been added to describe the type of data buffer in use instead of using CRYPTO_F_* flags to make it easier to add more types in the future if needed (e.g. wired userspace buffers for zero-copy). It will also make it easier to re-introduce separate input and output buffers (in-kernel TLS would benefit from this). Try to make the flags related to IV handling less insane: - CRYPTO_F_IV_SEPARATE means that the IV is stored in the 'crp_iv' member of the operation structure. If this flag is not set, the IV is stored in the data buffer at the 'crp_iv_start' offset. - CRYPTO_F_IV_GENERATE means that a random IV should be generated and stored into the data buffer. This cannot be used with CRYPTO_F_IV_SEPARATE. If a consumer wants to deal with explicit vs implicit IVs, etc. it can always generate the IV however it needs and store partial IVs in the buffer and the full IV/nonce in crp_iv and set CRYPTO_F_IV_SEPARATE. The layout of the buffer is now described via fields in cryptop. crp_aad_start and crp_aad_length define the boundaries of any AAD. Previously with GCM and CCM you defined an auth crd with this range, but for ETA your auth crd had to span both the AAD and plaintext (and they had to be adjacent). crp_payload_start and crp_payload_length define the boundaries of the plaintext/ciphertext. Modes that only do a single operation (COMPRESS, CIPHER, DIGEST) should only use this region and leave the AAD region empty. If a digest is present (or should be generated), it's starting location is marked by crp_digest_start. Instead of using the CRD_F_ENCRYPT flag to determine the direction of the operation, cryptop now includes an 'op' field defining the operation to perform. For digests I've added a new VERIFY digest mode which assumes a digest is present in the input and fails the request with EBADMSG if it doesn't match the internally-computed digest. GCM and CCM already assumed this, and the new AEAD mode requires this for decryption. The new ETA mode now also requires this for decryption, so IPsec and GELI no longer do their own authentication verification. Simple DIGEST operations can also do this, though there are no in-tree consumers. To eventually support some refcounting to close races, the session cookie is now passed to crypto_getop() and clients should no longer set crp_sesssion directly. - Assymteric crypto operation structures should be allocated via crypto_getkreq() and freed via crypto_freekreq(). This permits the crypto layer to track open asym requests and close races with a driver trying to unregister while asym requests are in flight. - crypto_copyback, crypto_copydata, crypto_apply, and crypto_contiguous_subsegment now accept the 'crp' object as the first parameter instead of individual members. This makes it easier to deal with different buffer types in the future as well as separate input and output buffers. It's also simpler for driver writers to use. - bus_dmamap_load_crp() loads a DMA mapping for a crypto buffer. This understands the various types of buffers so that drivers that use DMA do not have to be aware of different buffer types. - Helper routines now exist to build an auth context for HMAC IPAD and OPAD. This reduces some duplicated work among drivers. - Key buffers are now treated as const throughout the framework and in device drivers. However, session key buffers provided when a session is created are expected to remain alive for the duration of the session. - GCM and CCM sessions now only specify a cipher algorithm and a cipher key. The redundant auth information is not needed or used. - For cryptosoft, split up the code a bit such that the 'process' callback now invokes a function pointer in the session. This function pointer is set based on the mode (in effect) though it simplifies a few edge cases that would otherwise be in the switch in 'process'. It does split up GCM vs CCM which I think is more readable even if there is some duplication. - I changed /dev/crypto to support GMAC requests using CRYPTO_AES_NIST_GMAC as an auth algorithm and updated cryptocheck to work with it. - Combined cipher and auth sessions via /dev/crypto now always use ETA mode. The COP_F_CIPHER_FIRST flag is now a no-op that is ignored. This was actually documented as being true in crypto(4) before, but the code had not implemented this before I added the CIPHER_FIRST flag. - I have not yet updated /dev/crypto to be aware of explicit modes for sessions. I will probably do that at some point in the future as well as teach it about IV/nonce and tag lengths for AEAD so we can support all of the NIST KAT tests for GCM and CCM. - I've split up the exising crypto.9 manpage into several pages of which many are written from scratch. - I have converted all drivers and consumers in the tree and verified that they compile, but I have not tested all of them. I have tested the following drivers: - cryptosoft - aesni (AES only) - blake2 - ccr and the following consumers: - cryptodev - IPsec - ktls_ocf - GELI (lightly) I have not tested the following: - ccp - aesni with sha - hifn - kgssapi_krb5 - ubsec - padlock - safe - armv8_crypto (aarch64) - glxsb (i386) - sec (ppc) - cesa (armv7) - cryptocteon (mips64) - nlmsec (mips64) Discussed with: cem Relnotes: yes Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D23677
2020-03-27 18:25:23 +00:00
break;
default:
Add support for optional separate output buffers to in-kernel crypto. Some crypto consumers such as GELI and KTLS for file-backed sendfile need to store their output in a separate buffer from the input. Currently these consumers copy the contents of the input buffer into the output buffer and queue an in-place crypto operation on the output buffer. Using a separate output buffer avoids this copy. - Create a new 'struct crypto_buffer' describing a crypto buffer containing a type and type-specific fields. crp_ilen is gone, instead buffers that use a flat kernel buffer have a cb_buf_len field for their length. The length of other buffer types is inferred from the backing store (e.g. uio_resid for a uio). Requests now have two such structures: crp_buf for the input buffer, and crp_obuf for the output buffer. - Consumers now use helper functions (crypto_use_*, e.g. crypto_use_mbuf()) to configure the input buffer. If an output buffer is not configured, the request still modifies the input buffer in-place. A consumer uses a second set of helper functions (crypto_use_output_*) to configure an output buffer. - Consumers must request support for separate output buffers when creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are only permitted to queue a request with a separate output buffer on sessions with this flag set. Existing drivers already reject sessions with unknown flags, so this permits drivers to be modified to support this extension without requiring all drivers to change. - Several data-related functions now have matching versions that operate on an explicit buffer (e.g. crypto_apply_buf, crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf). - Most of the existing data-related functions operate on the input buffer. However crypto_copyback always writes to the output buffer if a request uses a separate output buffer. - For the regions in input/output buffers, the following conventions are followed: - AAD and IV are always present in input only and their fields are offsets into the input buffer. - payload is always present in both buffers. If a request uses a separate output buffer, it must set a new crp_payload_start_output field to the offset of the payload in the output buffer. - digest is in the input buffer for verify operations, and in the output buffer for compute operations. crp_digest_start is relative to the appropriate buffer. - Add a crypto buffer cursor abstraction. This is a more general form of some bits in the cryptosoft driver that tried to always use uio's. However, compared to the original code, this avoids rewalking the uio iovec array for requests with multiple vectors. It also avoids allocate an iovec array for mbufs and populating it by instead walking the mbuf chain directly. - Update the cryptosoft(4) driver to support separate output buffers making use of the cursor abstraction. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D24545
2020-05-25 22:12:04 +00:00
#ifdef INVARIANTS
panic("invalid crypto buf type %d", cb->cb_type);
#endif
error = 0;
break;
Refactor driver and consumer interfaces for OCF (in-kernel crypto). - The linked list of cryptoini structures used in session initialization is replaced with a new flat structure: struct crypto_session_params. This session includes a new mode to define how the other fields should be interpreted. Available modes include: - COMPRESS (for compression/decompression) - CIPHER (for simply encryption/decryption) - DIGEST (computing and verifying digests) - AEAD (combined auth and encryption such as AES-GCM and AES-CCM) - ETA (combined auth and encryption using encrypt-then-authenticate) Additional modes could be added in the future (e.g. if we wanted to support TLS MtE for AES-CBC in the kernel we could add a new mode for that. TLS modes might also affect how AAD is interpreted, etc.) The flat structure also includes the key lengths and algorithms as before. However, code doesn't have to walk the linked list and switch on the algorithm to determine which key is the auth key vs encryption key. The 'csp_auth_*' fields are always used for auth keys and settings and 'csp_cipher_*' for cipher. (Compression algorithms are stored in csp_cipher_alg.) - Drivers no longer register a list of supported algorithms. This doesn't quite work when you factor in modes (e.g. a driver might support both AES-CBC and SHA2-256-HMAC separately but not combined for ETA). Instead, a new 'crypto_probesession' method has been added to the kobj interface for symmteric crypto drivers. This method returns a negative value on success (similar to how device_probe works) and the crypto framework uses this value to pick the "best" driver. There are three constants for hardware (e.g. ccr), accelerated software (e.g. aesni), and plain software (cryptosoft) that give preference in that order. One effect of this is that if you request only hardware when creating a new session, you will no longer get a session using accelerated software. Another effect is that the default setting to disallow software crypto via /dev/crypto now disables accelerated software. Once a driver is chosen, 'crypto_newsession' is invoked as before. - Crypto operations are now solely described by the flat 'cryptop' structure. The linked list of descriptors has been removed. A separate enum has been added to describe the type of data buffer in use instead of using CRYPTO_F_* flags to make it easier to add more types in the future if needed (e.g. wired userspace buffers for zero-copy). It will also make it easier to re-introduce separate input and output buffers (in-kernel TLS would benefit from this). Try to make the flags related to IV handling less insane: - CRYPTO_F_IV_SEPARATE means that the IV is stored in the 'crp_iv' member of the operation structure. If this flag is not set, the IV is stored in the data buffer at the 'crp_iv_start' offset. - CRYPTO_F_IV_GENERATE means that a random IV should be generated and stored into the data buffer. This cannot be used with CRYPTO_F_IV_SEPARATE. If a consumer wants to deal with explicit vs implicit IVs, etc. it can always generate the IV however it needs and store partial IVs in the buffer and the full IV/nonce in crp_iv and set CRYPTO_F_IV_SEPARATE. The layout of the buffer is now described via fields in cryptop. crp_aad_start and crp_aad_length define the boundaries of any AAD. Previously with GCM and CCM you defined an auth crd with this range, but for ETA your auth crd had to span both the AAD and plaintext (and they had to be adjacent). crp_payload_start and crp_payload_length define the boundaries of the plaintext/ciphertext. Modes that only do a single operation (COMPRESS, CIPHER, DIGEST) should only use this region and leave the AAD region empty. If a digest is present (or should be generated), it's starting location is marked by crp_digest_start. Instead of using the CRD_F_ENCRYPT flag to determine the direction of the operation, cryptop now includes an 'op' field defining the operation to perform. For digests I've added a new VERIFY digest mode which assumes a digest is present in the input and fails the request with EBADMSG if it doesn't match the internally-computed digest. GCM and CCM already assumed this, and the new AEAD mode requires this for decryption. The new ETA mode now also requires this for decryption, so IPsec and GELI no longer do their own authentication verification. Simple DIGEST operations can also do this, though there are no in-tree consumers. To eventually support some refcounting to close races, the session cookie is now passed to crypto_getop() and clients should no longer set crp_sesssion directly. - Assymteric crypto operation structures should be allocated via crypto_getkreq() and freed via crypto_freekreq(). This permits the crypto layer to track open asym requests and close races with a driver trying to unregister while asym requests are in flight. - crypto_copyback, crypto_copydata, crypto_apply, and crypto_contiguous_subsegment now accept the 'crp' object as the first parameter instead of individual members. This makes it easier to deal with different buffer types in the future as well as separate input and output buffers. It's also simpler for driver writers to use. - bus_dmamap_load_crp() loads a DMA mapping for a crypto buffer. This understands the various types of buffers so that drivers that use DMA do not have to be aware of different buffer types. - Helper routines now exist to build an auth context for HMAC IPAD and OPAD. This reduces some duplicated work among drivers. - Key buffers are now treated as const throughout the framework and in device drivers. However, session key buffers provided when a session is created are expected to remain alive for the duration of the session. - GCM and CCM sessions now only specify a cipher algorithm and a cipher key. The redundant auth information is not needed or used. - For cryptosoft, split up the code a bit such that the 'process' callback now invokes a function pointer in the session. This function pointer is set based on the mode (in effect) though it simplifies a few edge cases that would otherwise be in the switch in 'process'. It does split up GCM vs CCM which I think is more readable even if there is some duplication. - I changed /dev/crypto to support GMAC requests using CRYPTO_AES_NIST_GMAC as an auth algorithm and updated cryptocheck to work with it. - Combined cipher and auth sessions via /dev/crypto now always use ETA mode. The COP_F_CIPHER_FIRST flag is now a no-op that is ignored. This was actually documented as being true in crypto(4) before, but the code had not implemented this before I added the CIPHER_FIRST flag. - I have not yet updated /dev/crypto to be aware of explicit modes for sessions. I will probably do that at some point in the future as well as teach it about IV/nonce and tag lengths for AEAD so we can support all of the NIST KAT tests for GCM and CCM. - I've split up the exising crypto.9 manpage into several pages of which many are written from scratch. - I have converted all drivers and consumers in the tree and verified that they compile, but I have not tested all of them. I have tested the following drivers: - cryptosoft - aesni (AES only) - blake2 - ccr and the following consumers: - cryptodev - IPsec - ktls_ocf - GELI (lightly) I have not tested the following: - ccp - aesni with sha - hifn - kgssapi_krb5 - ubsec - padlock - safe - armv8_crypto (aarch64) - glxsb (i386) - sec (ppc) - cesa (armv7) - cryptocteon (mips64) - nlmsec (mips64) Discussed with: cem Relnotes: yes Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D23677
2020-03-27 18:25:23 +00:00
}
return (error);
}
2014-12-12 19:56:36 +00:00
int
Add support for optional separate output buffers to in-kernel crypto. Some crypto consumers such as GELI and KTLS for file-backed sendfile need to store their output in a separate buffer from the input. Currently these consumers copy the contents of the input buffer into the output buffer and queue an in-place crypto operation on the output buffer. Using a separate output buffer avoids this copy. - Create a new 'struct crypto_buffer' describing a crypto buffer containing a type and type-specific fields. crp_ilen is gone, instead buffers that use a flat kernel buffer have a cb_buf_len field for their length. The length of other buffer types is inferred from the backing store (e.g. uio_resid for a uio). Requests now have two such structures: crp_buf for the input buffer, and crp_obuf for the output buffer. - Consumers now use helper functions (crypto_use_*, e.g. crypto_use_mbuf()) to configure the input buffer. If an output buffer is not configured, the request still modifies the input buffer in-place. A consumer uses a second set of helper functions (crypto_use_output_*) to configure an output buffer. - Consumers must request support for separate output buffers when creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are only permitted to queue a request with a separate output buffer on sessions with this flag set. Existing drivers already reject sessions with unknown flags, so this permits drivers to be modified to support this extension without requiring all drivers to change. - Several data-related functions now have matching versions that operate on an explicit buffer (e.g. crypto_apply_buf, crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf). - Most of the existing data-related functions operate on the input buffer. However crypto_copyback always writes to the output buffer if a request uses a separate output buffer. - For the regions in input/output buffers, the following conventions are followed: - AAD and IV are always present in input only and their fields are offsets into the input buffer. - payload is always present in both buffers. If a request uses a separate output buffer, it must set a new crp_payload_start_output field to the offset of the payload in the output buffer. - digest is in the input buffer for verify operations, and in the output buffer for compute operations. crp_digest_start is relative to the appropriate buffer. - Add a crypto buffer cursor abstraction. This is a more general form of some bits in the cryptosoft driver that tried to always use uio's. However, compared to the original code, this avoids rewalking the uio iovec array for requests with multiple vectors. It also avoids allocate an iovec array for mbufs and populating it by instead walking the mbuf chain directly. - Update the cryptosoft(4) driver to support separate output buffers making use of the cursor abstraction. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D24545
2020-05-25 22:12:04 +00:00
crypto_apply(struct cryptop *crp, int off, int len,
int (*f)(void *, const void *, u_int), void *arg)
2014-12-12 19:56:36 +00:00
{
Add support for optional separate output buffers to in-kernel crypto. Some crypto consumers such as GELI and KTLS for file-backed sendfile need to store their output in a separate buffer from the input. Currently these consumers copy the contents of the input buffer into the output buffer and queue an in-place crypto operation on the output buffer. Using a separate output buffer avoids this copy. - Create a new 'struct crypto_buffer' describing a crypto buffer containing a type and type-specific fields. crp_ilen is gone, instead buffers that use a flat kernel buffer have a cb_buf_len field for their length. The length of other buffer types is inferred from the backing store (e.g. uio_resid for a uio). Requests now have two such structures: crp_buf for the input buffer, and crp_obuf for the output buffer. - Consumers now use helper functions (crypto_use_*, e.g. crypto_use_mbuf()) to configure the input buffer. If an output buffer is not configured, the request still modifies the input buffer in-place. A consumer uses a second set of helper functions (crypto_use_output_*) to configure an output buffer. - Consumers must request support for separate output buffers when creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are only permitted to queue a request with a separate output buffer on sessions with this flag set. Existing drivers already reject sessions with unknown flags, so this permits drivers to be modified to support this extension without requiring all drivers to change. - Several data-related functions now have matching versions that operate on an explicit buffer (e.g. crypto_apply_buf, crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf). - Most of the existing data-related functions operate on the input buffer. However crypto_copyback always writes to the output buffer if a request uses a separate output buffer. - For the regions in input/output buffers, the following conventions are followed: - AAD and IV are always present in input only and their fields are offsets into the input buffer. - payload is always present in both buffers. If a request uses a separate output buffer, it must set a new crp_payload_start_output field to the offset of the payload in the output buffer. - digest is in the input buffer for verify operations, and in the output buffer for compute operations. crp_digest_start is relative to the appropriate buffer. - Add a crypto buffer cursor abstraction. This is a more general form of some bits in the cryptosoft driver that tried to always use uio's. However, compared to the original code, this avoids rewalking the uio iovec array for requests with multiple vectors. It also avoids allocate an iovec array for mbufs and populating it by instead walking the mbuf chain directly. - Update the cryptosoft(4) driver to support separate output buffers making use of the cursor abstraction. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D24545
2020-05-25 22:12:04 +00:00
return (crypto_apply_buf(&crp->crp_buf, off, len, f, arg));
2014-12-12 19:56:36 +00:00
}
static inline void *
m_contiguous_subsegment(struct mbuf *m, size_t skip, size_t len)
{
int rel_off;
MPASS(skip <= INT_MAX);
m = m_getptr(m, (int)skip, &rel_off);
if (m == NULL)
return (NULL);
MPASS(rel_off >= 0);
skip = rel_off;
if (skip + len > m->m_len)
return (NULL);
if (m->m_flags & M_EXTPG)
return (m_epg_contiguous_subsegment(m, skip, len));
return (mtod(m, char*) + skip);
}
static inline void *
cuio_contiguous_segment(struct uio *uio, size_t skip, size_t len)
{
int rel_off, idx;
MPASS(skip <= INT_MAX);
idx = cuio_getptr(uio, (int)skip, &rel_off);
if (idx < 0)
return (NULL);
MPASS(rel_off >= 0);
skip = rel_off;
if (skip + len > uio->uio_iov[idx].iov_len)
return (NULL);
return ((char *)uio->uio_iov[idx].iov_base + skip);
}
void *
Add support for optional separate output buffers to in-kernel crypto. Some crypto consumers such as GELI and KTLS for file-backed sendfile need to store their output in a separate buffer from the input. Currently these consumers copy the contents of the input buffer into the output buffer and queue an in-place crypto operation on the output buffer. Using a separate output buffer avoids this copy. - Create a new 'struct crypto_buffer' describing a crypto buffer containing a type and type-specific fields. crp_ilen is gone, instead buffers that use a flat kernel buffer have a cb_buf_len field for their length. The length of other buffer types is inferred from the backing store (e.g. uio_resid for a uio). Requests now have two such structures: crp_buf for the input buffer, and crp_obuf for the output buffer. - Consumers now use helper functions (crypto_use_*, e.g. crypto_use_mbuf()) to configure the input buffer. If an output buffer is not configured, the request still modifies the input buffer in-place. A consumer uses a second set of helper functions (crypto_use_output_*) to configure an output buffer. - Consumers must request support for separate output buffers when creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are only permitted to queue a request with a separate output buffer on sessions with this flag set. Existing drivers already reject sessions with unknown flags, so this permits drivers to be modified to support this extension without requiring all drivers to change. - Several data-related functions now have matching versions that operate on an explicit buffer (e.g. crypto_apply_buf, crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf). - Most of the existing data-related functions operate on the input buffer. However crypto_copyback always writes to the output buffer if a request uses a separate output buffer. - For the regions in input/output buffers, the following conventions are followed: - AAD and IV are always present in input only and their fields are offsets into the input buffer. - payload is always present in both buffers. If a request uses a separate output buffer, it must set a new crp_payload_start_output field to the offset of the payload in the output buffer. - digest is in the input buffer for verify operations, and in the output buffer for compute operations. crp_digest_start is relative to the appropriate buffer. - Add a crypto buffer cursor abstraction. This is a more general form of some bits in the cryptosoft driver that tried to always use uio's. However, compared to the original code, this avoids rewalking the uio iovec array for requests with multiple vectors. It also avoids allocate an iovec array for mbufs and populating it by instead walking the mbuf chain directly. - Update the cryptosoft(4) driver to support separate output buffers making use of the cursor abstraction. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D24545
2020-05-25 22:12:04 +00:00
crypto_buffer_contiguous_subsegment(struct crypto_buffer *cb, size_t skip,
size_t len)
{
Refactor driver and consumer interfaces for OCF (in-kernel crypto). - The linked list of cryptoini structures used in session initialization is replaced with a new flat structure: struct crypto_session_params. This session includes a new mode to define how the other fields should be interpreted. Available modes include: - COMPRESS (for compression/decompression) - CIPHER (for simply encryption/decryption) - DIGEST (computing and verifying digests) - AEAD (combined auth and encryption such as AES-GCM and AES-CCM) - ETA (combined auth and encryption using encrypt-then-authenticate) Additional modes could be added in the future (e.g. if we wanted to support TLS MtE for AES-CBC in the kernel we could add a new mode for that. TLS modes might also affect how AAD is interpreted, etc.) The flat structure also includes the key lengths and algorithms as before. However, code doesn't have to walk the linked list and switch on the algorithm to determine which key is the auth key vs encryption key. The 'csp_auth_*' fields are always used for auth keys and settings and 'csp_cipher_*' for cipher. (Compression algorithms are stored in csp_cipher_alg.) - Drivers no longer register a list of supported algorithms. This doesn't quite work when you factor in modes (e.g. a driver might support both AES-CBC and SHA2-256-HMAC separately but not combined for ETA). Instead, a new 'crypto_probesession' method has been added to the kobj interface for symmteric crypto drivers. This method returns a negative value on success (similar to how device_probe works) and the crypto framework uses this value to pick the "best" driver. There are three constants for hardware (e.g. ccr), accelerated software (e.g. aesni), and plain software (cryptosoft) that give preference in that order. One effect of this is that if you request only hardware when creating a new session, you will no longer get a session using accelerated software. Another effect is that the default setting to disallow software crypto via /dev/crypto now disables accelerated software. Once a driver is chosen, 'crypto_newsession' is invoked as before. - Crypto operations are now solely described by the flat 'cryptop' structure. The linked list of descriptors has been removed. A separate enum has been added to describe the type of data buffer in use instead of using CRYPTO_F_* flags to make it easier to add more types in the future if needed (e.g. wired userspace buffers for zero-copy). It will also make it easier to re-introduce separate input and output buffers (in-kernel TLS would benefit from this). Try to make the flags related to IV handling less insane: - CRYPTO_F_IV_SEPARATE means that the IV is stored in the 'crp_iv' member of the operation structure. If this flag is not set, the IV is stored in the data buffer at the 'crp_iv_start' offset. - CRYPTO_F_IV_GENERATE means that a random IV should be generated and stored into the data buffer. This cannot be used with CRYPTO_F_IV_SEPARATE. If a consumer wants to deal with explicit vs implicit IVs, etc. it can always generate the IV however it needs and store partial IVs in the buffer and the full IV/nonce in crp_iv and set CRYPTO_F_IV_SEPARATE. The layout of the buffer is now described via fields in cryptop. crp_aad_start and crp_aad_length define the boundaries of any AAD. Previously with GCM and CCM you defined an auth crd with this range, but for ETA your auth crd had to span both the AAD and plaintext (and they had to be adjacent). crp_payload_start and crp_payload_length define the boundaries of the plaintext/ciphertext. Modes that only do a single operation (COMPRESS, CIPHER, DIGEST) should only use this region and leave the AAD region empty. If a digest is present (or should be generated), it's starting location is marked by crp_digest_start. Instead of using the CRD_F_ENCRYPT flag to determine the direction of the operation, cryptop now includes an 'op' field defining the operation to perform. For digests I've added a new VERIFY digest mode which assumes a digest is present in the input and fails the request with EBADMSG if it doesn't match the internally-computed digest. GCM and CCM already assumed this, and the new AEAD mode requires this for decryption. The new ETA mode now also requires this for decryption, so IPsec and GELI no longer do their own authentication verification. Simple DIGEST operations can also do this, though there are no in-tree consumers. To eventually support some refcounting to close races, the session cookie is now passed to crypto_getop() and clients should no longer set crp_sesssion directly. - Assymteric crypto operation structures should be allocated via crypto_getkreq() and freed via crypto_freekreq(). This permits the crypto layer to track open asym requests and close races with a driver trying to unregister while asym requests are in flight. - crypto_copyback, crypto_copydata, crypto_apply, and crypto_contiguous_subsegment now accept the 'crp' object as the first parameter instead of individual members. This makes it easier to deal with different buffer types in the future as well as separate input and output buffers. It's also simpler for driver writers to use. - bus_dmamap_load_crp() loads a DMA mapping for a crypto buffer. This understands the various types of buffers so that drivers that use DMA do not have to be aware of different buffer types. - Helper routines now exist to build an auth context for HMAC IPAD and OPAD. This reduces some duplicated work among drivers. - Key buffers are now treated as const throughout the framework and in device drivers. However, session key buffers provided when a session is created are expected to remain alive for the duration of the session. - GCM and CCM sessions now only specify a cipher algorithm and a cipher key. The redundant auth information is not needed or used. - For cryptosoft, split up the code a bit such that the 'process' callback now invokes a function pointer in the session. This function pointer is set based on the mode (in effect) though it simplifies a few edge cases that would otherwise be in the switch in 'process'. It does split up GCM vs CCM which I think is more readable even if there is some duplication. - I changed /dev/crypto to support GMAC requests using CRYPTO_AES_NIST_GMAC as an auth algorithm and updated cryptocheck to work with it. - Combined cipher and auth sessions via /dev/crypto now always use ETA mode. The COP_F_CIPHER_FIRST flag is now a no-op that is ignored. This was actually documented as being true in crypto(4) before, but the code had not implemented this before I added the CIPHER_FIRST flag. - I have not yet updated /dev/crypto to be aware of explicit modes for sessions. I will probably do that at some point in the future as well as teach it about IV/nonce and tag lengths for AEAD so we can support all of the NIST KAT tests for GCM and CCM. - I've split up the exising crypto.9 manpage into several pages of which many are written from scratch. - I have converted all drivers and consumers in the tree and verified that they compile, but I have not tested all of them. I have tested the following drivers: - cryptosoft - aesni (AES only) - blake2 - ccr and the following consumers: - cryptodev - IPsec - ktls_ocf - GELI (lightly) I have not tested the following: - ccp - aesni with sha - hifn - kgssapi_krb5 - ubsec - padlock - safe - armv8_crypto (aarch64) - glxsb (i386) - sec (ppc) - cesa (armv7) - cryptocteon (mips64) - nlmsec (mips64) Discussed with: cem Relnotes: yes Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D23677
2020-03-27 18:25:23 +00:00
Add support for optional separate output buffers to in-kernel crypto. Some crypto consumers such as GELI and KTLS for file-backed sendfile need to store their output in a separate buffer from the input. Currently these consumers copy the contents of the input buffer into the output buffer and queue an in-place crypto operation on the output buffer. Using a separate output buffer avoids this copy. - Create a new 'struct crypto_buffer' describing a crypto buffer containing a type and type-specific fields. crp_ilen is gone, instead buffers that use a flat kernel buffer have a cb_buf_len field for their length. The length of other buffer types is inferred from the backing store (e.g. uio_resid for a uio). Requests now have two such structures: crp_buf for the input buffer, and crp_obuf for the output buffer. - Consumers now use helper functions (crypto_use_*, e.g. crypto_use_mbuf()) to configure the input buffer. If an output buffer is not configured, the request still modifies the input buffer in-place. A consumer uses a second set of helper functions (crypto_use_output_*) to configure an output buffer. - Consumers must request support for separate output buffers when creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are only permitted to queue a request with a separate output buffer on sessions with this flag set. Existing drivers already reject sessions with unknown flags, so this permits drivers to be modified to support this extension without requiring all drivers to change. - Several data-related functions now have matching versions that operate on an explicit buffer (e.g. crypto_apply_buf, crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf). - Most of the existing data-related functions operate on the input buffer. However crypto_copyback always writes to the output buffer if a request uses a separate output buffer. - For the regions in input/output buffers, the following conventions are followed: - AAD and IV are always present in input only and their fields are offsets into the input buffer. - payload is always present in both buffers. If a request uses a separate output buffer, it must set a new crp_payload_start_output field to the offset of the payload in the output buffer. - digest is in the input buffer for verify operations, and in the output buffer for compute operations. crp_digest_start is relative to the appropriate buffer. - Add a crypto buffer cursor abstraction. This is a more general form of some bits in the cryptosoft driver that tried to always use uio's. However, compared to the original code, this avoids rewalking the uio iovec array for requests with multiple vectors. It also avoids allocate an iovec array for mbufs and populating it by instead walking the mbuf chain directly. - Update the cryptosoft(4) driver to support separate output buffers making use of the cursor abstraction. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D24545
2020-05-25 22:12:04 +00:00
switch (cb->cb_type) {
Refactor driver and consumer interfaces for OCF (in-kernel crypto). - The linked list of cryptoini structures used in session initialization is replaced with a new flat structure: struct crypto_session_params. This session includes a new mode to define how the other fields should be interpreted. Available modes include: - COMPRESS (for compression/decompression) - CIPHER (for simply encryption/decryption) - DIGEST (computing and verifying digests) - AEAD (combined auth and encryption such as AES-GCM and AES-CCM) - ETA (combined auth and encryption using encrypt-then-authenticate) Additional modes could be added in the future (e.g. if we wanted to support TLS MtE for AES-CBC in the kernel we could add a new mode for that. TLS modes might also affect how AAD is interpreted, etc.) The flat structure also includes the key lengths and algorithms as before. However, code doesn't have to walk the linked list and switch on the algorithm to determine which key is the auth key vs encryption key. The 'csp_auth_*' fields are always used for auth keys and settings and 'csp_cipher_*' for cipher. (Compression algorithms are stored in csp_cipher_alg.) - Drivers no longer register a list of supported algorithms. This doesn't quite work when you factor in modes (e.g. a driver might support both AES-CBC and SHA2-256-HMAC separately but not combined for ETA). Instead, a new 'crypto_probesession' method has been added to the kobj interface for symmteric crypto drivers. This method returns a negative value on success (similar to how device_probe works) and the crypto framework uses this value to pick the "best" driver. There are three constants for hardware (e.g. ccr), accelerated software (e.g. aesni), and plain software (cryptosoft) that give preference in that order. One effect of this is that if you request only hardware when creating a new session, you will no longer get a session using accelerated software. Another effect is that the default setting to disallow software crypto via /dev/crypto now disables accelerated software. Once a driver is chosen, 'crypto_newsession' is invoked as before. - Crypto operations are now solely described by the flat 'cryptop' structure. The linked list of descriptors has been removed. A separate enum has been added to describe the type of data buffer in use instead of using CRYPTO_F_* flags to make it easier to add more types in the future if needed (e.g. wired userspace buffers for zero-copy). It will also make it easier to re-introduce separate input and output buffers (in-kernel TLS would benefit from this). Try to make the flags related to IV handling less insane: - CRYPTO_F_IV_SEPARATE means that the IV is stored in the 'crp_iv' member of the operation structure. If this flag is not set, the IV is stored in the data buffer at the 'crp_iv_start' offset. - CRYPTO_F_IV_GENERATE means that a random IV should be generated and stored into the data buffer. This cannot be used with CRYPTO_F_IV_SEPARATE. If a consumer wants to deal with explicit vs implicit IVs, etc. it can always generate the IV however it needs and store partial IVs in the buffer and the full IV/nonce in crp_iv and set CRYPTO_F_IV_SEPARATE. The layout of the buffer is now described via fields in cryptop. crp_aad_start and crp_aad_length define the boundaries of any AAD. Previously with GCM and CCM you defined an auth crd with this range, but for ETA your auth crd had to span both the AAD and plaintext (and they had to be adjacent). crp_payload_start and crp_payload_length define the boundaries of the plaintext/ciphertext. Modes that only do a single operation (COMPRESS, CIPHER, DIGEST) should only use this region and leave the AAD region empty. If a digest is present (or should be generated), it's starting location is marked by crp_digest_start. Instead of using the CRD_F_ENCRYPT flag to determine the direction of the operation, cryptop now includes an 'op' field defining the operation to perform. For digests I've added a new VERIFY digest mode which assumes a digest is present in the input and fails the request with EBADMSG if it doesn't match the internally-computed digest. GCM and CCM already assumed this, and the new AEAD mode requires this for decryption. The new ETA mode now also requires this for decryption, so IPsec and GELI no longer do their own authentication verification. Simple DIGEST operations can also do this, though there are no in-tree consumers. To eventually support some refcounting to close races, the session cookie is now passed to crypto_getop() and clients should no longer set crp_sesssion directly. - Assymteric crypto operation structures should be allocated via crypto_getkreq() and freed via crypto_freekreq(). This permits the crypto layer to track open asym requests and close races with a driver trying to unregister while asym requests are in flight. - crypto_copyback, crypto_copydata, crypto_apply, and crypto_contiguous_subsegment now accept the 'crp' object as the first parameter instead of individual members. This makes it easier to deal with different buffer types in the future as well as separate input and output buffers. It's also simpler for driver writers to use. - bus_dmamap_load_crp() loads a DMA mapping for a crypto buffer. This understands the various types of buffers so that drivers that use DMA do not have to be aware of different buffer types. - Helper routines now exist to build an auth context for HMAC IPAD and OPAD. This reduces some duplicated work among drivers. - Key buffers are now treated as const throughout the framework and in device drivers. However, session key buffers provided when a session is created are expected to remain alive for the duration of the session. - GCM and CCM sessions now only specify a cipher algorithm and a cipher key. The redundant auth information is not needed or used. - For cryptosoft, split up the code a bit such that the 'process' callback now invokes a function pointer in the session. This function pointer is set based on the mode (in effect) though it simplifies a few edge cases that would otherwise be in the switch in 'process'. It does split up GCM vs CCM which I think is more readable even if there is some duplication. - I changed /dev/crypto to support GMAC requests using CRYPTO_AES_NIST_GMAC as an auth algorithm and updated cryptocheck to work with it. - Combined cipher and auth sessions via /dev/crypto now always use ETA mode. The COP_F_CIPHER_FIRST flag is now a no-op that is ignored. This was actually documented as being true in crypto(4) before, but the code had not implemented this before I added the CIPHER_FIRST flag. - I have not yet updated /dev/crypto to be aware of explicit modes for sessions. I will probably do that at some point in the future as well as teach it about IV/nonce and tag lengths for AEAD so we can support all of the NIST KAT tests for GCM and CCM. - I've split up the exising crypto.9 manpage into several pages of which many are written from scratch. - I have converted all drivers and consumers in the tree and verified that they compile, but I have not tested all of them. I have tested the following drivers: - cryptosoft - aesni (AES only) - blake2 - ccr and the following consumers: - cryptodev - IPsec - ktls_ocf - GELI (lightly) I have not tested the following: - ccp - aesni with sha - hifn - kgssapi_krb5 - ubsec - padlock - safe - armv8_crypto (aarch64) - glxsb (i386) - sec (ppc) - cesa (armv7) - cryptocteon (mips64) - nlmsec (mips64) Discussed with: cem Relnotes: yes Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D23677
2020-03-27 18:25:23 +00:00
case CRYPTO_BUF_MBUF:
case CRYPTO_BUF_SINGLE_MBUF:
Add support for optional separate output buffers to in-kernel crypto. Some crypto consumers such as GELI and KTLS for file-backed sendfile need to store their output in a separate buffer from the input. Currently these consumers copy the contents of the input buffer into the output buffer and queue an in-place crypto operation on the output buffer. Using a separate output buffer avoids this copy. - Create a new 'struct crypto_buffer' describing a crypto buffer containing a type and type-specific fields. crp_ilen is gone, instead buffers that use a flat kernel buffer have a cb_buf_len field for their length. The length of other buffer types is inferred from the backing store (e.g. uio_resid for a uio). Requests now have two such structures: crp_buf for the input buffer, and crp_obuf for the output buffer. - Consumers now use helper functions (crypto_use_*, e.g. crypto_use_mbuf()) to configure the input buffer. If an output buffer is not configured, the request still modifies the input buffer in-place. A consumer uses a second set of helper functions (crypto_use_output_*) to configure an output buffer. - Consumers must request support for separate output buffers when creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are only permitted to queue a request with a separate output buffer on sessions with this flag set. Existing drivers already reject sessions with unknown flags, so this permits drivers to be modified to support this extension without requiring all drivers to change. - Several data-related functions now have matching versions that operate on an explicit buffer (e.g. crypto_apply_buf, crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf). - Most of the existing data-related functions operate on the input buffer. However crypto_copyback always writes to the output buffer if a request uses a separate output buffer. - For the regions in input/output buffers, the following conventions are followed: - AAD and IV are always present in input only and their fields are offsets into the input buffer. - payload is always present in both buffers. If a request uses a separate output buffer, it must set a new crp_payload_start_output field to the offset of the payload in the output buffer. - digest is in the input buffer for verify operations, and in the output buffer for compute operations. crp_digest_start is relative to the appropriate buffer. - Add a crypto buffer cursor abstraction. This is a more general form of some bits in the cryptosoft driver that tried to always use uio's. However, compared to the original code, this avoids rewalking the uio iovec array for requests with multiple vectors. It also avoids allocate an iovec array for mbufs and populating it by instead walking the mbuf chain directly. - Update the cryptosoft(4) driver to support separate output buffers making use of the cursor abstraction. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D24545
2020-05-25 22:12:04 +00:00
return (m_contiguous_subsegment(cb->cb_mbuf, skip, len));
Refactor driver and consumer interfaces for OCF (in-kernel crypto). - The linked list of cryptoini structures used in session initialization is replaced with a new flat structure: struct crypto_session_params. This session includes a new mode to define how the other fields should be interpreted. Available modes include: - COMPRESS (for compression/decompression) - CIPHER (for simply encryption/decryption) - DIGEST (computing and verifying digests) - AEAD (combined auth and encryption such as AES-GCM and AES-CCM) - ETA (combined auth and encryption using encrypt-then-authenticate) Additional modes could be added in the future (e.g. if we wanted to support TLS MtE for AES-CBC in the kernel we could add a new mode for that. TLS modes might also affect how AAD is interpreted, etc.) The flat structure also includes the key lengths and algorithms as before. However, code doesn't have to walk the linked list and switch on the algorithm to determine which key is the auth key vs encryption key. The 'csp_auth_*' fields are always used for auth keys and settings and 'csp_cipher_*' for cipher. (Compression algorithms are stored in csp_cipher_alg.) - Drivers no longer register a list of supported algorithms. This doesn't quite work when you factor in modes (e.g. a driver might support both AES-CBC and SHA2-256-HMAC separately but not combined for ETA). Instead, a new 'crypto_probesession' method has been added to the kobj interface for symmteric crypto drivers. This method returns a negative value on success (similar to how device_probe works) and the crypto framework uses this value to pick the "best" driver. There are three constants for hardware (e.g. ccr), accelerated software (e.g. aesni), and plain software (cryptosoft) that give preference in that order. One effect of this is that if you request only hardware when creating a new session, you will no longer get a session using accelerated software. Another effect is that the default setting to disallow software crypto via /dev/crypto now disables accelerated software. Once a driver is chosen, 'crypto_newsession' is invoked as before. - Crypto operations are now solely described by the flat 'cryptop' structure. The linked list of descriptors has been removed. A separate enum has been added to describe the type of data buffer in use instead of using CRYPTO_F_* flags to make it easier to add more types in the future if needed (e.g. wired userspace buffers for zero-copy). It will also make it easier to re-introduce separate input and output buffers (in-kernel TLS would benefit from this). Try to make the flags related to IV handling less insane: - CRYPTO_F_IV_SEPARATE means that the IV is stored in the 'crp_iv' member of the operation structure. If this flag is not set, the IV is stored in the data buffer at the 'crp_iv_start' offset. - CRYPTO_F_IV_GENERATE means that a random IV should be generated and stored into the data buffer. This cannot be used with CRYPTO_F_IV_SEPARATE. If a consumer wants to deal with explicit vs implicit IVs, etc. it can always generate the IV however it needs and store partial IVs in the buffer and the full IV/nonce in crp_iv and set CRYPTO_F_IV_SEPARATE. The layout of the buffer is now described via fields in cryptop. crp_aad_start and crp_aad_length define the boundaries of any AAD. Previously with GCM and CCM you defined an auth crd with this range, but for ETA your auth crd had to span both the AAD and plaintext (and they had to be adjacent). crp_payload_start and crp_payload_length define the boundaries of the plaintext/ciphertext. Modes that only do a single operation (COMPRESS, CIPHER, DIGEST) should only use this region and leave the AAD region empty. If a digest is present (or should be generated), it's starting location is marked by crp_digest_start. Instead of using the CRD_F_ENCRYPT flag to determine the direction of the operation, cryptop now includes an 'op' field defining the operation to perform. For digests I've added a new VERIFY digest mode which assumes a digest is present in the input and fails the request with EBADMSG if it doesn't match the internally-computed digest. GCM and CCM already assumed this, and the new AEAD mode requires this for decryption. The new ETA mode now also requires this for decryption, so IPsec and GELI no longer do their own authentication verification. Simple DIGEST operations can also do this, though there are no in-tree consumers. To eventually support some refcounting to close races, the session cookie is now passed to crypto_getop() and clients should no longer set crp_sesssion directly. - Assymteric crypto operation structures should be allocated via crypto_getkreq() and freed via crypto_freekreq(). This permits the crypto layer to track open asym requests and close races with a driver trying to unregister while asym requests are in flight. - crypto_copyback, crypto_copydata, crypto_apply, and crypto_contiguous_subsegment now accept the 'crp' object as the first parameter instead of individual members. This makes it easier to deal with different buffer types in the future as well as separate input and output buffers. It's also simpler for driver writers to use. - bus_dmamap_load_crp() loads a DMA mapping for a crypto buffer. This understands the various types of buffers so that drivers that use DMA do not have to be aware of different buffer types. - Helper routines now exist to build an auth context for HMAC IPAD and OPAD. This reduces some duplicated work among drivers. - Key buffers are now treated as const throughout the framework and in device drivers. However, session key buffers provided when a session is created are expected to remain alive for the duration of the session. - GCM and CCM sessions now only specify a cipher algorithm and a cipher key. The redundant auth information is not needed or used. - For cryptosoft, split up the code a bit such that the 'process' callback now invokes a function pointer in the session. This function pointer is set based on the mode (in effect) though it simplifies a few edge cases that would otherwise be in the switch in 'process'. It does split up GCM vs CCM which I think is more readable even if there is some duplication. - I changed /dev/crypto to support GMAC requests using CRYPTO_AES_NIST_GMAC as an auth algorithm and updated cryptocheck to work with it. - Combined cipher and auth sessions via /dev/crypto now always use ETA mode. The COP_F_CIPHER_FIRST flag is now a no-op that is ignored. This was actually documented as being true in crypto(4) before, but the code had not implemented this before I added the CIPHER_FIRST flag. - I have not yet updated /dev/crypto to be aware of explicit modes for sessions. I will probably do that at some point in the future as well as teach it about IV/nonce and tag lengths for AEAD so we can support all of the NIST KAT tests for GCM and CCM. - I've split up the exising crypto.9 manpage into several pages of which many are written from scratch. - I have converted all drivers and consumers in the tree and verified that they compile, but I have not tested all of them. I have tested the following drivers: - cryptosoft - aesni (AES only) - blake2 - ccr and the following consumers: - cryptodev - IPsec - ktls_ocf - GELI (lightly) I have not tested the following: - ccp - aesni with sha - hifn - kgssapi_krb5 - ubsec - padlock - safe - armv8_crypto (aarch64) - glxsb (i386) - sec (ppc) - cesa (armv7) - cryptocteon (mips64) - nlmsec (mips64) Discussed with: cem Relnotes: yes Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D23677
2020-03-27 18:25:23 +00:00
case CRYPTO_BUF_UIO:
Add support for optional separate output buffers to in-kernel crypto. Some crypto consumers such as GELI and KTLS for file-backed sendfile need to store their output in a separate buffer from the input. Currently these consumers copy the contents of the input buffer into the output buffer and queue an in-place crypto operation on the output buffer. Using a separate output buffer avoids this copy. - Create a new 'struct crypto_buffer' describing a crypto buffer containing a type and type-specific fields. crp_ilen is gone, instead buffers that use a flat kernel buffer have a cb_buf_len field for their length. The length of other buffer types is inferred from the backing store (e.g. uio_resid for a uio). Requests now have two such structures: crp_buf for the input buffer, and crp_obuf for the output buffer. - Consumers now use helper functions (crypto_use_*, e.g. crypto_use_mbuf()) to configure the input buffer. If an output buffer is not configured, the request still modifies the input buffer in-place. A consumer uses a second set of helper functions (crypto_use_output_*) to configure an output buffer. - Consumers must request support for separate output buffers when creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are only permitted to queue a request with a separate output buffer on sessions with this flag set. Existing drivers already reject sessions with unknown flags, so this permits drivers to be modified to support this extension without requiring all drivers to change. - Several data-related functions now have matching versions that operate on an explicit buffer (e.g. crypto_apply_buf, crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf). - Most of the existing data-related functions operate on the input buffer. However crypto_copyback always writes to the output buffer if a request uses a separate output buffer. - For the regions in input/output buffers, the following conventions are followed: - AAD and IV are always present in input only and their fields are offsets into the input buffer. - payload is always present in both buffers. If a request uses a separate output buffer, it must set a new crp_payload_start_output field to the offset of the payload in the output buffer. - digest is in the input buffer for verify operations, and in the output buffer for compute operations. crp_digest_start is relative to the appropriate buffer. - Add a crypto buffer cursor abstraction. This is a more general form of some bits in the cryptosoft driver that tried to always use uio's. However, compared to the original code, this avoids rewalking the uio iovec array for requests with multiple vectors. It also avoids allocate an iovec array for mbufs and populating it by instead walking the mbuf chain directly. - Update the cryptosoft(4) driver to support separate output buffers making use of the cursor abstraction. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D24545
2020-05-25 22:12:04 +00:00
return (cuio_contiguous_segment(cb->cb_uio, skip, len));
#if CRYPTO_MAY_HAVE_VMPAGE
case CRYPTO_BUF_VMPAGE:
MPASS(skip + len <= cb->cb_vm_page_len);
return (cvm_page_contiguous_segment(cb->cb_vm_page,
skip + cb->cb_vm_page_offset, len));
#endif /* CRYPTO_MAY_HAVE_VMPAGE */
Refactor driver and consumer interfaces for OCF (in-kernel crypto). - The linked list of cryptoini structures used in session initialization is replaced with a new flat structure: struct crypto_session_params. This session includes a new mode to define how the other fields should be interpreted. Available modes include: - COMPRESS (for compression/decompression) - CIPHER (for simply encryption/decryption) - DIGEST (computing and verifying digests) - AEAD (combined auth and encryption such as AES-GCM and AES-CCM) - ETA (combined auth and encryption using encrypt-then-authenticate) Additional modes could be added in the future (e.g. if we wanted to support TLS MtE for AES-CBC in the kernel we could add a new mode for that. TLS modes might also affect how AAD is interpreted, etc.) The flat structure also includes the key lengths and algorithms as before. However, code doesn't have to walk the linked list and switch on the algorithm to determine which key is the auth key vs encryption key. The 'csp_auth_*' fields are always used for auth keys and settings and 'csp_cipher_*' for cipher. (Compression algorithms are stored in csp_cipher_alg.) - Drivers no longer register a list of supported algorithms. This doesn't quite work when you factor in modes (e.g. a driver might support both AES-CBC and SHA2-256-HMAC separately but not combined for ETA). Instead, a new 'crypto_probesession' method has been added to the kobj interface for symmteric crypto drivers. This method returns a negative value on success (similar to how device_probe works) and the crypto framework uses this value to pick the "best" driver. There are three constants for hardware (e.g. ccr), accelerated software (e.g. aesni), and plain software (cryptosoft) that give preference in that order. One effect of this is that if you request only hardware when creating a new session, you will no longer get a session using accelerated software. Another effect is that the default setting to disallow software crypto via /dev/crypto now disables accelerated software. Once a driver is chosen, 'crypto_newsession' is invoked as before. - Crypto operations are now solely described by the flat 'cryptop' structure. The linked list of descriptors has been removed. A separate enum has been added to describe the type of data buffer in use instead of using CRYPTO_F_* flags to make it easier to add more types in the future if needed (e.g. wired userspace buffers for zero-copy). It will also make it easier to re-introduce separate input and output buffers (in-kernel TLS would benefit from this). Try to make the flags related to IV handling less insane: - CRYPTO_F_IV_SEPARATE means that the IV is stored in the 'crp_iv' member of the operation structure. If this flag is not set, the IV is stored in the data buffer at the 'crp_iv_start' offset. - CRYPTO_F_IV_GENERATE means that a random IV should be generated and stored into the data buffer. This cannot be used with CRYPTO_F_IV_SEPARATE. If a consumer wants to deal with explicit vs implicit IVs, etc. it can always generate the IV however it needs and store partial IVs in the buffer and the full IV/nonce in crp_iv and set CRYPTO_F_IV_SEPARATE. The layout of the buffer is now described via fields in cryptop. crp_aad_start and crp_aad_length define the boundaries of any AAD. Previously with GCM and CCM you defined an auth crd with this range, but for ETA your auth crd had to span both the AAD and plaintext (and they had to be adjacent). crp_payload_start and crp_payload_length define the boundaries of the plaintext/ciphertext. Modes that only do a single operation (COMPRESS, CIPHER, DIGEST) should only use this region and leave the AAD region empty. If a digest is present (or should be generated), it's starting location is marked by crp_digest_start. Instead of using the CRD_F_ENCRYPT flag to determine the direction of the operation, cryptop now includes an 'op' field defining the operation to perform. For digests I've added a new VERIFY digest mode which assumes a digest is present in the input and fails the request with EBADMSG if it doesn't match the internally-computed digest. GCM and CCM already assumed this, and the new AEAD mode requires this for decryption. The new ETA mode now also requires this for decryption, so IPsec and GELI no longer do their own authentication verification. Simple DIGEST operations can also do this, though there are no in-tree consumers. To eventually support some refcounting to close races, the session cookie is now passed to crypto_getop() and clients should no longer set crp_sesssion directly. - Assymteric crypto operation structures should be allocated via crypto_getkreq() and freed via crypto_freekreq(). This permits the crypto layer to track open asym requests and close races with a driver trying to unregister while asym requests are in flight. - crypto_copyback, crypto_copydata, crypto_apply, and crypto_contiguous_subsegment now accept the 'crp' object as the first parameter instead of individual members. This makes it easier to deal with different buffer types in the future as well as separate input and output buffers. It's also simpler for driver writers to use. - bus_dmamap_load_crp() loads a DMA mapping for a crypto buffer. This understands the various types of buffers so that drivers that use DMA do not have to be aware of different buffer types. - Helper routines now exist to build an auth context for HMAC IPAD and OPAD. This reduces some duplicated work among drivers. - Key buffers are now treated as const throughout the framework and in device drivers. However, session key buffers provided when a session is created are expected to remain alive for the duration of the session. - GCM and CCM sessions now only specify a cipher algorithm and a cipher key. The redundant auth information is not needed or used. - For cryptosoft, split up the code a bit such that the 'process' callback now invokes a function pointer in the session. This function pointer is set based on the mode (in effect) though it simplifies a few edge cases that would otherwise be in the switch in 'process'. It does split up GCM vs CCM which I think is more readable even if there is some duplication. - I changed /dev/crypto to support GMAC requests using CRYPTO_AES_NIST_GMAC as an auth algorithm and updated cryptocheck to work with it. - Combined cipher and auth sessions via /dev/crypto now always use ETA mode. The COP_F_CIPHER_FIRST flag is now a no-op that is ignored. This was actually documented as being true in crypto(4) before, but the code had not implemented this before I added the CIPHER_FIRST flag. - I have not yet updated /dev/crypto to be aware of explicit modes for sessions. I will probably do that at some point in the future as well as teach it about IV/nonce and tag lengths for AEAD so we can support all of the NIST KAT tests for GCM and CCM. - I've split up the exising crypto.9 manpage into several pages of which many are written from scratch. - I have converted all drivers and consumers in the tree and verified that they compile, but I have not tested all of them. I have tested the following drivers: - cryptosoft - aesni (AES only) - blake2 - ccr and the following consumers: - cryptodev - IPsec - ktls_ocf - GELI (lightly) I have not tested the following: - ccp - aesni with sha - hifn - kgssapi_krb5 - ubsec - padlock - safe - armv8_crypto (aarch64) - glxsb (i386) - sec (ppc) - cesa (armv7) - cryptocteon (mips64) - nlmsec (mips64) Discussed with: cem Relnotes: yes Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D23677
2020-03-27 18:25:23 +00:00
case CRYPTO_BUF_CONTIG:
Add support for optional separate output buffers to in-kernel crypto. Some crypto consumers such as GELI and KTLS for file-backed sendfile need to store their output in a separate buffer from the input. Currently these consumers copy the contents of the input buffer into the output buffer and queue an in-place crypto operation on the output buffer. Using a separate output buffer avoids this copy. - Create a new 'struct crypto_buffer' describing a crypto buffer containing a type and type-specific fields. crp_ilen is gone, instead buffers that use a flat kernel buffer have a cb_buf_len field for their length. The length of other buffer types is inferred from the backing store (e.g. uio_resid for a uio). Requests now have two such structures: crp_buf for the input buffer, and crp_obuf for the output buffer. - Consumers now use helper functions (crypto_use_*, e.g. crypto_use_mbuf()) to configure the input buffer. If an output buffer is not configured, the request still modifies the input buffer in-place. A consumer uses a second set of helper functions (crypto_use_output_*) to configure an output buffer. - Consumers must request support for separate output buffers when creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are only permitted to queue a request with a separate output buffer on sessions with this flag set. Existing drivers already reject sessions with unknown flags, so this permits drivers to be modified to support this extension without requiring all drivers to change. - Several data-related functions now have matching versions that operate on an explicit buffer (e.g. crypto_apply_buf, crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf). - Most of the existing data-related functions operate on the input buffer. However crypto_copyback always writes to the output buffer if a request uses a separate output buffer. - For the regions in input/output buffers, the following conventions are followed: - AAD and IV are always present in input only and their fields are offsets into the input buffer. - payload is always present in both buffers. If a request uses a separate output buffer, it must set a new crp_payload_start_output field to the offset of the payload in the output buffer. - digest is in the input buffer for verify operations, and in the output buffer for compute operations. crp_digest_start is relative to the appropriate buffer. - Add a crypto buffer cursor abstraction. This is a more general form of some bits in the cryptosoft driver that tried to always use uio's. However, compared to the original code, this avoids rewalking the uio iovec array for requests with multiple vectors. It also avoids allocate an iovec array for mbufs and populating it by instead walking the mbuf chain directly. - Update the cryptosoft(4) driver to support separate output buffers making use of the cursor abstraction. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D24545
2020-05-25 22:12:04 +00:00
MPASS(skip + len <= cb->cb_buf_len);
return (cb->cb_buf + skip);
Refactor driver and consumer interfaces for OCF (in-kernel crypto). - The linked list of cryptoini structures used in session initialization is replaced with a new flat structure: struct crypto_session_params. This session includes a new mode to define how the other fields should be interpreted. Available modes include: - COMPRESS (for compression/decompression) - CIPHER (for simply encryption/decryption) - DIGEST (computing and verifying digests) - AEAD (combined auth and encryption such as AES-GCM and AES-CCM) - ETA (combined auth and encryption using encrypt-then-authenticate) Additional modes could be added in the future (e.g. if we wanted to support TLS MtE for AES-CBC in the kernel we could add a new mode for that. TLS modes might also affect how AAD is interpreted, etc.) The flat structure also includes the key lengths and algorithms as before. However, code doesn't have to walk the linked list and switch on the algorithm to determine which key is the auth key vs encryption key. The 'csp_auth_*' fields are always used for auth keys and settings and 'csp_cipher_*' for cipher. (Compression algorithms are stored in csp_cipher_alg.) - Drivers no longer register a list of supported algorithms. This doesn't quite work when you factor in modes (e.g. a driver might support both AES-CBC and SHA2-256-HMAC separately but not combined for ETA). Instead, a new 'crypto_probesession' method has been added to the kobj interface for symmteric crypto drivers. This method returns a negative value on success (similar to how device_probe works) and the crypto framework uses this value to pick the "best" driver. There are three constants for hardware (e.g. ccr), accelerated software (e.g. aesni), and plain software (cryptosoft) that give preference in that order. One effect of this is that if you request only hardware when creating a new session, you will no longer get a session using accelerated software. Another effect is that the default setting to disallow software crypto via /dev/crypto now disables accelerated software. Once a driver is chosen, 'crypto_newsession' is invoked as before. - Crypto operations are now solely described by the flat 'cryptop' structure. The linked list of descriptors has been removed. A separate enum has been added to describe the type of data buffer in use instead of using CRYPTO_F_* flags to make it easier to add more types in the future if needed (e.g. wired userspace buffers for zero-copy). It will also make it easier to re-introduce separate input and output buffers (in-kernel TLS would benefit from this). Try to make the flags related to IV handling less insane: - CRYPTO_F_IV_SEPARATE means that the IV is stored in the 'crp_iv' member of the operation structure. If this flag is not set, the IV is stored in the data buffer at the 'crp_iv_start' offset. - CRYPTO_F_IV_GENERATE means that a random IV should be generated and stored into the data buffer. This cannot be used with CRYPTO_F_IV_SEPARATE. If a consumer wants to deal with explicit vs implicit IVs, etc. it can always generate the IV however it needs and store partial IVs in the buffer and the full IV/nonce in crp_iv and set CRYPTO_F_IV_SEPARATE. The layout of the buffer is now described via fields in cryptop. crp_aad_start and crp_aad_length define the boundaries of any AAD. Previously with GCM and CCM you defined an auth crd with this range, but for ETA your auth crd had to span both the AAD and plaintext (and they had to be adjacent). crp_payload_start and crp_payload_length define the boundaries of the plaintext/ciphertext. Modes that only do a single operation (COMPRESS, CIPHER, DIGEST) should only use this region and leave the AAD region empty. If a digest is present (or should be generated), it's starting location is marked by crp_digest_start. Instead of using the CRD_F_ENCRYPT flag to determine the direction of the operation, cryptop now includes an 'op' field defining the operation to perform. For digests I've added a new VERIFY digest mode which assumes a digest is present in the input and fails the request with EBADMSG if it doesn't match the internally-computed digest. GCM and CCM already assumed this, and the new AEAD mode requires this for decryption. The new ETA mode now also requires this for decryption, so IPsec and GELI no longer do their own authentication verification. Simple DIGEST operations can also do this, though there are no in-tree consumers. To eventually support some refcounting to close races, the session cookie is now passed to crypto_getop() and clients should no longer set crp_sesssion directly. - Assymteric crypto operation structures should be allocated via crypto_getkreq() and freed via crypto_freekreq(). This permits the crypto layer to track open asym requests and close races with a driver trying to unregister while asym requests are in flight. - crypto_copyback, crypto_copydata, crypto_apply, and crypto_contiguous_subsegment now accept the 'crp' object as the first parameter instead of individual members. This makes it easier to deal with different buffer types in the future as well as separate input and output buffers. It's also simpler for driver writers to use. - bus_dmamap_load_crp() loads a DMA mapping for a crypto buffer. This understands the various types of buffers so that drivers that use DMA do not have to be aware of different buffer types. - Helper routines now exist to build an auth context for HMAC IPAD and OPAD. This reduces some duplicated work among drivers. - Key buffers are now treated as const throughout the framework and in device drivers. However, session key buffers provided when a session is created are expected to remain alive for the duration of the session. - GCM and CCM sessions now only specify a cipher algorithm and a cipher key. The redundant auth information is not needed or used. - For cryptosoft, split up the code a bit such that the 'process' callback now invokes a function pointer in the session. This function pointer is set based on the mode (in effect) though it simplifies a few edge cases that would otherwise be in the switch in 'process'. It does split up GCM vs CCM which I think is more readable even if there is some duplication. - I changed /dev/crypto to support GMAC requests using CRYPTO_AES_NIST_GMAC as an auth algorithm and updated cryptocheck to work with it. - Combined cipher and auth sessions via /dev/crypto now always use ETA mode. The COP_F_CIPHER_FIRST flag is now a no-op that is ignored. This was actually documented as being true in crypto(4) before, but the code had not implemented this before I added the CIPHER_FIRST flag. - I have not yet updated /dev/crypto to be aware of explicit modes for sessions. I will probably do that at some point in the future as well as teach it about IV/nonce and tag lengths for AEAD so we can support all of the NIST KAT tests for GCM and CCM. - I've split up the exising crypto.9 manpage into several pages of which many are written from scratch. - I have converted all drivers and consumers in the tree and verified that they compile, but I have not tested all of them. I have tested the following drivers: - cryptosoft - aesni (AES only) - blake2 - ccr and the following consumers: - cryptodev - IPsec - ktls_ocf - GELI (lightly) I have not tested the following: - ccp - aesni with sha - hifn - kgssapi_krb5 - ubsec - padlock - safe - armv8_crypto (aarch64) - glxsb (i386) - sec (ppc) - cesa (armv7) - cryptocteon (mips64) - nlmsec (mips64) Discussed with: cem Relnotes: yes Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D23677
2020-03-27 18:25:23 +00:00
default:
Add support for optional separate output buffers to in-kernel crypto. Some crypto consumers such as GELI and KTLS for file-backed sendfile need to store their output in a separate buffer from the input. Currently these consumers copy the contents of the input buffer into the output buffer and queue an in-place crypto operation on the output buffer. Using a separate output buffer avoids this copy. - Create a new 'struct crypto_buffer' describing a crypto buffer containing a type and type-specific fields. crp_ilen is gone, instead buffers that use a flat kernel buffer have a cb_buf_len field for their length. The length of other buffer types is inferred from the backing store (e.g. uio_resid for a uio). Requests now have two such structures: crp_buf for the input buffer, and crp_obuf for the output buffer. - Consumers now use helper functions (crypto_use_*, e.g. crypto_use_mbuf()) to configure the input buffer. If an output buffer is not configured, the request still modifies the input buffer in-place. A consumer uses a second set of helper functions (crypto_use_output_*) to configure an output buffer. - Consumers must request support for separate output buffers when creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are only permitted to queue a request with a separate output buffer on sessions with this flag set. Existing drivers already reject sessions with unknown flags, so this permits drivers to be modified to support this extension without requiring all drivers to change. - Several data-related functions now have matching versions that operate on an explicit buffer (e.g. crypto_apply_buf, crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf). - Most of the existing data-related functions operate on the input buffer. However crypto_copyback always writes to the output buffer if a request uses a separate output buffer. - For the regions in input/output buffers, the following conventions are followed: - AAD and IV are always present in input only and their fields are offsets into the input buffer. - payload is always present in both buffers. If a request uses a separate output buffer, it must set a new crp_payload_start_output field to the offset of the payload in the output buffer. - digest is in the input buffer for verify operations, and in the output buffer for compute operations. crp_digest_start is relative to the appropriate buffer. - Add a crypto buffer cursor abstraction. This is a more general form of some bits in the cryptosoft driver that tried to always use uio's. However, compared to the original code, this avoids rewalking the uio iovec array for requests with multiple vectors. It also avoids allocate an iovec array for mbufs and populating it by instead walking the mbuf chain directly. - Update the cryptosoft(4) driver to support separate output buffers making use of the cursor abstraction. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D24545
2020-05-25 22:12:04 +00:00
#ifdef INVARIANTS
panic("invalid crp buf type %d", cb->cb_type);
#endif
return (NULL);
}
}
Add support for optional separate output buffers to in-kernel crypto. Some crypto consumers such as GELI and KTLS for file-backed sendfile need to store their output in a separate buffer from the input. Currently these consumers copy the contents of the input buffer into the output buffer and queue an in-place crypto operation on the output buffer. Using a separate output buffer avoids this copy. - Create a new 'struct crypto_buffer' describing a crypto buffer containing a type and type-specific fields. crp_ilen is gone, instead buffers that use a flat kernel buffer have a cb_buf_len field for their length. The length of other buffer types is inferred from the backing store (e.g. uio_resid for a uio). Requests now have two such structures: crp_buf for the input buffer, and crp_obuf for the output buffer. - Consumers now use helper functions (crypto_use_*, e.g. crypto_use_mbuf()) to configure the input buffer. If an output buffer is not configured, the request still modifies the input buffer in-place. A consumer uses a second set of helper functions (crypto_use_output_*) to configure an output buffer. - Consumers must request support for separate output buffers when creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are only permitted to queue a request with a separate output buffer on sessions with this flag set. Existing drivers already reject sessions with unknown flags, so this permits drivers to be modified to support this extension without requiring all drivers to change. - Several data-related functions now have matching versions that operate on an explicit buffer (e.g. crypto_apply_buf, crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf). - Most of the existing data-related functions operate on the input buffer. However crypto_copyback always writes to the output buffer if a request uses a separate output buffer. - For the regions in input/output buffers, the following conventions are followed: - AAD and IV are always present in input only and their fields are offsets into the input buffer. - payload is always present in both buffers. If a request uses a separate output buffer, it must set a new crp_payload_start_output field to the offset of the payload in the output buffer. - digest is in the input buffer for verify operations, and in the output buffer for compute operations. crp_digest_start is relative to the appropriate buffer. - Add a crypto buffer cursor abstraction. This is a more general form of some bits in the cryptosoft driver that tried to always use uio's. However, compared to the original code, this avoids rewalking the uio iovec array for requests with multiple vectors. It also avoids allocate an iovec array for mbufs and populating it by instead walking the mbuf chain directly. - Update the cryptosoft(4) driver to support separate output buffers making use of the cursor abstraction. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D24545
2020-05-25 22:12:04 +00:00
void *
crypto_contiguous_subsegment(struct cryptop *crp, size_t skip, size_t len)
{
return (crypto_buffer_contiguous_subsegment(&crp->crp_buf, skip, len));
}