freebsd-src/lib/libsys/getsockopt.2

.\" Copyright (c) 1983, 1991, 1993
.\"	The Regents of the University of California.  All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\" 3. Neither the name of the University nor the names of its contributors
.\"    may be used to endorse or promote products derived from this software
.\"    without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.Dd February 8, 2021
.Dt GETSOCKOPT 2
.Os
.Sh NAME
.Nm getsockopt ,
.Nm setsockopt
.Nd get and set options on sockets
.Sh LIBRARY
.Lb libc
.Sh SYNOPSIS
.In sys/types.h
.In sys/socket.h
.Ft int
.Fn getsockopt "int s" "int level" "int optname" "void * restrict optval" "socklen_t * restrict optlen"
.Ft int
.Fn setsockopt "int s" "int level" "int optname" "const void *optval" "socklen_t optlen"
.Sh DESCRIPTION
The
.Fn getsockopt
and
.Fn setsockopt
system calls
manipulate the
.Em options
associated with a socket.
Options may exist at multiple
protocol levels; they are always present at the uppermost
.Dq socket
level.
.Pp
When manipulating socket options the level at which the
option resides and the name of the option must be specified.
To manipulate options at the socket level,
.Fa level
is specified as
.Dv SOL_SOCKET .
To manipulate options at any
other level the protocol number of the appropriate protocol
controlling the option is supplied.
For example,
to indicate that an option is to be interpreted by the
.Tn TCP
protocol,
.Fa level
should be set to the protocol number of
.Tn TCP ;
see
.Xr getprotoent 3 .
.Pp
The
.Fa optval
and
.Fa optlen
arguments
are used to access option values for
.Fn setsockopt .
For
.Fn getsockopt
they identify a buffer in which the value for the
requested option(s) are to be returned.
For
.Fn getsockopt ,
.Fa optlen
is a value-result argument, initially containing the
size of the buffer pointed to by
.Fa optval ,
and modified on return to indicate the actual size of
the value returned.
If no option value is
to be supplied or returned,
.Fa optval
may be NULL.
.Pp
The
.Fa optname
argument
and any specified options are passed uninterpreted to the appropriate
protocol module for interpretation.
The include file
.In sys/socket.h
contains definitions for
socket level options, described below.
Options at other protocol levels vary in format and
name; consult the appropriate entries in
section
4 of the manual.
.Pp
Most socket-level options utilize an
.Vt int
argument for
.Fa optval .
For
.Fn setsockopt ,
the argument should be non-zero to enable a boolean option,
or zero if the option is to be disabled.
.Dv SO_LINGER
uses a
.Vt "struct linger"
argument, defined in
.In sys/socket.h ,
which specifies the desired state of the option and the
linger interval (see below).
.Dv SO_SNDTIMEO
and
.Dv SO_RCVTIMEO
use a
.Vt "struct timeval"
argument, defined in
.In sys/time.h .
.Pp
The following options are recognized at the socket level.
For protocol-specific options, see protocol manual pages,
e.g.
.Xr ip 4
or
.Xr tcp 4 .
Except as noted, each may be examined with
.Fn getsockopt
and set with
.Fn setsockopt .
.Bl -column SO_ACCEPTFILTER -offset indent
.It Dv SO_DEBUG Ta "enables recording of debugging information"
.It Dv SO_REUSEADDR Ta "enables local address reuse"
.It Dv SO_REUSEPORT Ta "enables duplicate address and port bindings"
.It Dv SO_REUSEPORT_LB Ta "enables duplicate address and port bindings with load balancing"
.It Dv SO_KEEPALIVE Ta "enables keep connections alive"
.It Dv SO_DONTROUTE Ta "enables routing bypass for outgoing messages"
.It Dv SO_LINGER  Ta "linger on close if data present"
.It Dv SO_BROADCAST Ta "enables permission to transmit broadcast messages"
.It Dv SO_OOBINLINE Ta "enables reception of out-of-band data in band"
.It Dv SO_SNDBUF Ta "set buffer size for output"
.It Dv SO_RCVBUF Ta "set buffer size for input"
.It Dv SO_SNDLOWAT Ta "set minimum count for output"
.It Dv SO_RCVLOWAT Ta "set minimum count for input"
.It Dv SO_SNDTIMEO Ta "set timeout value for output"
.It Dv SO_RCVTIMEO Ta "set timeout value for input"
.It Dv SO_ACCEPTFILTER Ta "set accept filter on listening socket"
.It Dv SO_NOSIGPIPE Ta
controls generation of
.Dv SIGPIPE
for the socket
.It Dv SO_TIMESTAMP Ta "enables reception of a timestamp with datagrams"
.It Dv SO_BINTIME Ta "enables reception of a timestamp with datagrams"
.It Dv SO_ACCEPTCONN Ta "get listening status of the socket (get only)"
.It Dv SO_DOMAIN Ta "get the domain of the socket (get only)"
.It Dv SO_TYPE Ta "get the type of the socket (get only)"
.It Dv SO_PROTOCOL Ta "get the protocol number for the socket (get only)"
.It Dv SO_PROTOTYPE Ta "SunOS alias for the Linux SO_PROTOCOL (get only)"
.It Dv SO_ERROR Ta "get and clear error on the socket (get only)"
.It Dv SO_RERROR Ta "enables receive error reporting"
.It Dv SO_SETFIB Ta "set the associated FIB (routing table) for the socket (set only)"
.El
.Pp
The following options are recognized in
.Fx :
.Bl -column SO_LISTENINCQLEN -offset indent
.It Dv SO_LABEL Ta "get MAC label of the socket (get only)"
.It Dv SO_PEERLABEL Ta "get socket's peer's MAC label (get only)"
.It Dv SO_LISTENQLIMIT Ta "get backlog limit of the socket (get only)"
.It Dv SO_LISTENQLEN Ta "get complete queue length of the socket (get only)"
.It Dv SO_LISTENINCQLEN Ta "get incomplete queue length of the socket (get only)"
.It Dv SO_USER_COOKIE Ta "set the 'so_user_cookie' value for the socket (uint32_t, set only)"
.It Dv SO_TS_CLOCK Ta "set specific format of timestamp returned by SO_TIMESTAMP"
.It Dv SO_MAX_PACING_RATE Ta "set the maximum transmit rate in bytes per second for the socket"
.It Dv SO_NO_OFFLOAD Ta "disables protocol offloads"
.It Dv SO_NO_DDP Ta "disables direct data placement offload"
.El
.Pp
.Dv SO_DEBUG
enables debugging in the underlying protocol modules.
.Pp
.Dv SO_REUSEADDR
indicates that the rules used in validating addresses supplied
in a
.Xr bind 2
system call should allow reuse of local addresses.
.Pp
.Dv SO_REUSEPORT
allows completely duplicate bindings by multiple processes
if they all set
.Dv SO_REUSEPORT
before binding the port.
This option permits multiple instances of a program to each
receive UDP/IP multicast or broadcast datagrams destined for the bound port.
.Pp
.Dv SO_REUSEPORT_LB
allows completely duplicate bindings by multiple sockets
if they all set
.Dv SO_REUSEPORT_LB
before binding the port.
Incoming TCP and UDP connections are distributed among the participating
listening sockets based on a hash function of local port number, and foreign IP
address and port number.
A maximum of 256 sockets can be bound to the same load-balancing group.
.Pp
.Dv SO_KEEPALIVE
enables the
periodic transmission of messages on a connected socket.
Should the
connected party fail to respond to these messages, the connection is
considered broken and processes using the socket are notified via a
.Dv SIGPIPE
signal when attempting to send data.
.Pp
.Dv SO_DONTROUTE
indicates that outgoing messages should
bypass the standard routing facilities.
Instead, messages are directed
to the appropriate network interface according to the network portion
of the destination address.
.Pp
.Dv SO_LINGER
controls the action taken when unsent messages
are queued on socket and a
.Xr close 2
is performed.
If the socket promises reliable delivery of data and
.Dv SO_LINGER
is set,
the system will block the process on the
.Xr close 2
attempt until it is able to transmit the data or until it decides it
is unable to deliver the information (a timeout period, termed the
linger interval, is specified in seconds in the
.Fn setsockopt
system call when
.Dv SO_LINGER
is requested).
If
.Dv SO_LINGER
is disabled and a
.Xr close 2
is issued, the system will process the close in a manner that allows
the process to continue as quickly as possible.
.Pp
The option
.Dv SO_BROADCAST
requests permission to send broadcast datagrams
on the socket.
Broadcast was a privileged operation in earlier versions of the system.
.Pp
With protocols that support out-of-band data, the
.Dv SO_OOBINLINE
option
requests that out-of-band data be placed in the normal data input queue
as received; it will then be accessible with
.Xr recv 2
or
.Xr read 2
calls without the
.Dv MSG_OOB
flag.
Some protocols always behave as if this option is set.
.Pp
.Dv SO_SNDBUF
and
.Dv SO_RCVBUF
are options to adjust the normal
buffer sizes allocated for output and input buffers, respectively.
The buffer size may be increased for high-volume connections,
or may be decreased to limit the possible backlog of incoming data.
The system places an absolute maximum on these values, which is accessible
through the
.Xr sysctl 3
MIB variable
.Dq Li kern.ipc.maxsockbuf .
.Pp
.Dv SO_SNDLOWAT
is an option to set the minimum count for output operations.
Most output operations process all of the data supplied
by the call, delivering data to the protocol for transmission
and blocking as necessary for flow control.
Nonblocking output operations will process as much data as permitted
subject to flow control without blocking, but will process no data
if flow control does not allow the smaller of the low water mark value
or the entire request to be processed.
A
.Xr select 2
operation testing the ability to write to a socket will return true
only if the low water mark amount could be processed.
The default value for
.Dv SO_SNDLOWAT
is set to a convenient size for network efficiency, often 1024.
.Pp
.Dv SO_RCVLOWAT
is an option to set the minimum count for input operations.
In general, receive calls will block until any (non-zero) amount of data
is received, then return with the smaller of the amount available or the amount
requested.
The default value for
.Dv SO_RCVLOWAT
is 1.
If
.Dv SO_RCVLOWAT
is set to a larger value, blocking receive calls normally
wait until they have received the smaller of the low water mark value
or the requested amount.
Receive calls may still return less than the low water mark if an error
occurs, a signal is caught, or the type of data next in the receive queue
is different from that which was returned.
.Pp
.Dv SO_SNDTIMEO
is an option to set a timeout value for output operations.
It accepts a
.Vt "struct timeval"
argument with the number of seconds and microseconds
used to limit waits for output operations to complete.
If a send operation has blocked for this much time,
it returns with a partial count
or with the error
.Er EWOULDBLOCK
if no data were sent.
In the current implementation, this timer is restarted each time additional
data are delivered to the protocol,
implying that the limit applies to output portions ranging in size
from the low water mark to the high water mark for output.
.Pp
.Dv SO_RCVTIMEO
is an option to set a timeout value for input operations.
It accepts a
.Vt "struct timeval"
argument with the number of seconds and microseconds
used to limit waits for input operations to complete.
In the current implementation, this timer is restarted each time additional
data are received by the protocol,
and thus the limit is in effect an inactivity timer.
If a receive operation has been blocked for this much time without
receiving additional data, it returns with a short count
or with the error
.Er EWOULDBLOCK
if no data were received.
.Pp
.Dv SO_SETFIB
can be used to over-ride the default FIB (routing table) for the given socket.
The value must be from 0 to one less than the number returned from
the sysctl
.Em net.fibs .
.Pp
.Dv SO_USER_COOKIE
can be used to set the uint32_t so_user_cookie field in the socket.
The value is an uint32_t, and can be used in the kernel code that
manipulates traffic related to the socket.
The default value for the field is 0.
As an example, the value can be used as the skipto target or
pipe number in
.Nm ipfw/dummynet .
.Pp
.Dv SO_ACCEPTFILTER
places an
.Xr accept_filter 9
on the socket,
which will filter incoming connections
on a listening stream socket before being presented for
.Xr accept 2 .
Once more,
.Xr listen 2
must be called on the socket before
trying to install the filter on it,
or else the
.Fn setsockopt
system call will fail.
.Bd -literal
struct  accept_filter_arg {
        char    af_name[16];
        char    af_arg[256-16];
};
.Ed
.Pp
The
.Fa optval
argument
should point to a
.Fa struct accept_filter_arg
that will select and configure the
.Xr accept_filter 9 .
The
.Fa af_name
argument
should be filled with the name of the accept filter
that the application wishes to place on the listening socket.
The optional argument
.Fa af_arg
can be passed to the accept
filter specified by
.Fa af_name
to provide additional configuration options at attach time.
Passing in an
.Fa optval
of NULL will remove the filter.
.Pp
The
.Dv SO_NOSIGPIPE
option controls generation of the
.Dv SIGPIPE
signal normally sent
when writing to a connected socket where the other end has been
closed returns with the error
.Er EPIPE .
.Pp
If the
.Dv SO_TIMESTAMP
or
.Dv SO_BINTIME
option is enabled on a
.Dv SOCK_DGRAM
socket, the
.Xr recvmsg 2
call may return a timestamp corresponding to when the datagram was received.
However, it may not, for example due to a resource shortage.
The
.Va msg_control
field in the
.Vt msghdr
structure points to a buffer that contains a
.Vt cmsghdr
structure followed by a
.Vt "struct timeval"
for
.Dv SO_TIMESTAMP
and
.Vt "struct bintime"
for
.Dv SO_BINTIME .
The
.Vt cmsghdr
fields have the following values for TIMESTAMP by default:
.Bd -literal
     cmsg_len = CMSG_LEN(sizeof(struct timeval));
     cmsg_level = SOL_SOCKET;
     cmsg_type = SCM_TIMESTAMP;
.Ed
.Pp
and for
.Dv SO_BINTIME :
.Bd -literal
     cmsg_len = CMSG_LEN(sizeof(struct bintime));
     cmsg_level = SOL_SOCKET;
     cmsg_type = SCM_BINTIME;
.Ed
.Pp
Additional timestamp types are available by following
.Dv SO_TIMESTAMP
with
.Dv SO_TS_CLOCK ,
which requests a specific timestamp format to be returned instead of
.Dv SCM_TIMESTAMP when
.Dv SO_TIMESTAMP is enabled.
These
.Dv SO_TS_CLOCK
values are recognized in
.Fx :
.Bl -column SO_TS_CLOCK -offset indent
.It Dv SO_TS_REALTIME_MICRO Ta "realtime (SCM_TIMESTAMP, struct timeval), default"
.It Dv SO_TS_BINTIME Ta "realtime (SCM_BINTIME, struct bintime)"
.It Dv SO_TS_REALTIME Ta "realtime (SCM_REALTIME, struct timespec)"
.It Dv SO_TS_MONOTONIC Ta "monotonic time (SCM_MONOTONIC, struct timespec)"
.El
.Pp
.Dv SO_ACCEPTCONN ,
.Dv SO_TYPE ,
.Dv SO_PROTOCOL
(and its alias
.Dv SO_PROTOTYPE )
and
.Dv SO_ERROR
are options used only with
.Fn getsockopt .
.Dv SO_ACCEPTCONN
returns whether the socket is currently accepting connections,
that is, whether or not the
.Xr listen 2
system call was invoked on the socket.
.Dv SO_TYPE
returns the type of the socket, such as
.Dv SOCK_STREAM ;
it is useful for servers that inherit sockets on startup.
.Dv SO_PROTOCOL
returns the protocol number for the socket, for
.Dv AF_INET
and
.Dv AF_INET6
address families.
.Dv SO_ERROR
returns any pending error on the socket and clears
the error status.
It may be used to check for asynchronous errors on connected
datagram sockets or for other asynchronous errors.
.Dv SO_RERROR
indicates that receive buffer overflows should be handled as errors.
Historically receive buffer overflows have been ignored and programs
could not tell if they missed messages or messages had been truncated
because of overflows.
Since programs historically do not expect to get receive overflow errors,
this behavior is not the default.
.Pp
.Dv SO_LABEL
returns the MAC label of the socket.
.Dv SO_PEERLABEL
returns the MAC label of the socket's peer.
Note that your kernel must be compiled with MAC support.
See
.Xr mac 3
for more information.
.Pp
.Dv SO_LISTENQLIMIT
returns the maximal number of queued connections, as set by
.Xr listen 2 .
.Dv SO_LISTENQLEN
returns the number of unaccepted complete connections.
.Dv SO_LISTENINCQLEN
returns the number of unaccepted incomplete connections.
.Pp
.Dv SO_MAX_PACING_RATE
instruct the socket and underlying network adapter layers to limit the
transfer rate to the given unsigned 32-bit value in bytes per second.
.Pp
.Dv SO_NO_OFFLOAD
disables support for protocol offloads.
At present, this prevents TCP sockets from using TCP offload engines.
.Dv SO_NO_DDP
disables support for a specific TCP offload known as direct data
placement (DDP).
DDP is an offload supported by Chelsio network adapters that permits
reassembled TCP data streams to be received via zero-copy in
user-supplied buffers using
.Xr aio_read 2 .
.Sh RETURN VALUES
.Rv -std
.Sh ERRORS
The
.Fn getsockopt
and
.Fn setsockopt
system calls succeed unless:
.Bl -tag -width Er
.It Bq Er EBADF
The argument
.Fa s
is not a valid descriptor.
.It Bq Er ENOTSOCK
The argument
.Fa s
is a file, not a socket.
.It Bq Er ENOPROTOOPT
The option is unknown at the level indicated.
.It Bq Er EFAULT
The address pointed to by
.Fa optval
is not in a valid part of the process address space.
For
.Fn getsockopt ,
this error may also be returned if
.Fa optlen
is not in a valid part of the process address space.
.It Bq Er EINVAL
Installing an
.Xr accept_filter 9
on a non-listening socket was attempted.
.It Bq Er ENOMEM
A memory allocation failed that was required to service the request.
.El
.Pp
The
.Fn setsockopt
system call may also return the following error:
.Bl -tag -width Er
.It Bq Er ENOBUFS
Insufficient resources were available in the system
to perform the operation.
.El
.Sh SEE ALSO
.Xr ioctl 2 ,
.Xr listen 2 ,
.Xr recvmsg 2 ,
.Xr socket 2 ,
.Xr getprotoent 3 ,
.Xr mac 3 ,
.Xr sysctl 3 ,
.Xr ip 4 ,
.Xr ip6 4 ,
.Xr sctp 4 ,
.Xr tcp 4 ,
.Xr protocols 5 ,
.Xr sysctl 8 ,
.Xr accept_filter 9 ,
.Xr bintime 9
.Sh HISTORY
The
.Fn getsockopt
and
.Fn setsockopt
system calls appeared in
.Bx 4.2 .
.Sh BUGS
Several of the socket options should be handled at lower levels of the system.