system/NetworkManager
system/NetworkManager
1
0
Fork 0
mirror of https://gitlab.freedesktop.org/NetworkManager/NetworkManager synced 2024-11-05 19:03:31 +00:00
Code Issues Projects Releases Packages Wiki Activity
NetworkManager/man/nmcli-examples.xml
Francesco Giudici e3ea7245c3 man: add OTP-based VPN activation example
2018-11-14 17:15:50 +01:00

587 lines
28 KiB
XML
Raw Blame History

<?xml version='1.0'?>
<?xml-stylesheet type="text/xsl" href="http://docbook.sourceforge.net/release/xsl/current/xhtml/docbook.xsl"?>
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd" [
<!ENTITY % entities SYSTEM "common.ent" >
%entities;
]>
<!--
nmcli-examples(7) manual page
Copyright 2005 - 2016 Red Hat, Inc.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.1
or any later version published by the Free Software Foundation;
with no Invariant Sections, no Front-Cover Texts, and no Back-Cover
Texts. You may obtain a copy of the GNU Free Documentation License
from the Free Software Foundation by visiting their Web site or by
writing to:
Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-->
<refentry id="nmcli-examples">
<refentryinfo>
<title>nmcli-examples</title>
<author>NetworkManager developers</author>
</refentryinfo>
<refmeta>
<refentrytitle>nmcli-examples</refentrytitle>
<manvolnum>7</manvolnum>
<refmiscinfo class="source">NetworkManager</refmiscinfo>
<refmiscinfo class="manual">Examples</refmiscinfo>
<refmiscinfo class="version">&NM_VERSION;</refmiscinfo>
</refmeta>
<refnamediv>
<refname>nmcli-examples</refname>
<refpurpose>usage examples of nmcli</refpurpose>
</refnamediv>
<refsynopsisdiv>
<cmdsynopsis>
<command>nmcli</command>
<arg choice="opt" rep="repeat">OPTIONS</arg>
</cmdsynopsis>
</refsynopsisdiv>
<refsect1>
<title>Description</title>
<para>
<emphasis>nmcli</emphasis> is a command-line client for NetworkManager. It
allows controlling NetworkManager and reporting its status. For more information
please refer to <link linkend='nmcli'><citerefentry><refentrytitle>nmcli</refentrytitle><manvolnum>1</manvolnum></citerefentry></link>
manual page.
</para>
<para>
The purpose of this manual page is to provide you with various examples and
usage scenarios of <emphasis>nmcli</emphasis>.
</para>
</refsect1>
<refsect1>
<title>Examples</title>
<example><title>Listing available Wi-Fi APs</title>
<screen><prompt>$ </prompt><userinput>nmcli device wifi list</userinput>
* SSID MODE CHAN RATE SIGNAL BARS SECURITY
netdatacomm_local Infra 6 54 Mbit/s 37 ▂▄__ WEP
* F1 Infra 11 54 Mbit/s 98 ▂▄▆█ WPA1
LoremCorp Infra 1 54 Mbit/s 62 ▂▄▆_ WPA2 802.1X
Internet Infra 6 54 Mbit/s 29 ▂___ WPA1
HPB110a.F2672A Ad-Hoc 6 54 Mbit/s 22 ▂___ --
Jozinet Infra 1 54 Mbit/s 19 ▂___ WEP
VOIP Infra 1 54 Mbit/s 20 ▂___ WEP
MARTINA Infra 4 54 Mbit/s 32 ▂▄__ WPA2
N24PU1 Infra 7 11 Mbit/s 22 ▂___ --
alfa Infra 1 54 Mbit/s 67 ▂▄▆_ WPA2
bertnet Infra 5 54 Mbit/s 20 ▂___ WPA1 WPA2</screen>
<para>
This command shows how to list available Wi-Fi networks (APs). You can also use
<emphasis>--fields</emphasis> option for displaying different columns.
<emphasis role="bold">nmcli -f all dev wifi list</emphasis> will show all of them.
</para>
</example>
<example><title>Showing general information and properties for a Wi-Fi interface</title>
<screen><prompt>$ </prompt><userinput>nmcli -p -f general,wifi-properties device show wlan0</userinput>
===========================================================================
Device details (wlan0)
===========================================================================
GENERAL.DEVICE: wlan0
GENERAL.TYPE: wifi
GENERAL.VENDOR: Intel Corporation
GENERAL.PRODUCT: PRO/Wireless 5100 AGN [Shiloh] Network Connection
GENERAL.DRIVER: iwlwifi
GENERAL.DRIVER-VERSION: 3.8.13-100.fc17.x86_64
GENERAL.FIRMWARE-VERSION: 8.83.5.1 build 33692
GENERAL.HWADDR: 00:1E:65:37:A1:D3
GENERAL.MTU: 1500
GENERAL.STATE: 100 (connected)
GENERAL.REASON: 0 (No reason given)
GENERAL.UDI: /sys/devices/pci0000:00/0000:00:1c.1/net/wlan0
GENERAL.IP-IFACE: wlan0
GENERAL.IS-SOFTWARE: no
GENERAL.NM-MANAGED: yes
GENERAL.AUTOCONNECT: yes
GENERAL.FIRMWARE-MISSING: no
GENERAL.CONNECTION: My Alfa WiFi
GENERAL.CON-UUID: 85194f4c-d496-4eec-bae0-d880b4cbcf26
GENERAL.CON-PATH: /org/freedesktop/NetworkManager/ActiveConnection/
10
---------------------------------------------------------------------------
WIFI-PROPERTIES.WEP: yes
WIFI-PROPERTIES.WPA: yes
WIFI-PROPERTIES.WPA2: yes
WIFI-PROPERTIES.TKIP: yes
WIFI-PROPERTIES.CCMP: yes
WIFI-PROPERTIES.AP: no
WIFI-PROPERTIES.ADHOC: yes
---------------------------------------------------------------------------</screen>
<para>
This command shows information about a Wi-Fi device.
</para>
</example>
<example><title>Listing NetworkManager polkit permissions</title>
<screen><prompt>$ </prompt><userinput>nmcli general permissions</userinput>
PERMISSION VALUE
org.freedesktop.NetworkManager.enable-disable-network yes
org.freedesktop.NetworkManager.enable-disable-wifi yes
org.freedesktop.NetworkManager.enable-disable-wwan yes
org.freedesktop.NetworkManager.enable-disable-wimax yes
org.freedesktop.NetworkManager.sleep-wake no
org.freedesktop.NetworkManager.network-control yes
org.freedesktop.NetworkManager.wifi.share.protected yes
org.freedesktop.NetworkManager.wifi.share.open yes
org.freedesktop.NetworkManager.settings.modify.system yes
org.freedesktop.NetworkManager.settings.modify.own yes
org.freedesktop.NetworkManager.settings.modify.hostname auth
org.freedesktop.NetworkManager.settings.modify.global-dns auth
org.freedesktop.NetworkManager.reload auth</screen>
<para>
This command shows configured polkit permissions for various NetworkManager
operations. These permissions or actions (using polkit language) are configured
by a system administrator and are not meant to be changed by users. The usual
place for the polkit configuration is /usr/share/polkit-1/actions/org.freedesktop.NetworkManager.policy.
<emphasis>pkaction</emphasis> command can display description for polkit actions.
<synopsis><command>
pkaction --action-id org.freedesktop.NetworkManager.network-control --verbose
</command></synopsis>
More information about polkit can be found at http://www.freedesktop.org/wiki/Software/polkit.
</para>
</example>
<example><title>Listing NetworkManager log level and domains</title>
<screen><prompt>$ </prompt><userinput>nmcli general logging</userinput>
LEVEL DOMAINS
INFO PLATFORM,RFKILL,ETHER,WIFI,BT,MB,DHCP4,DHCP6,PPP,WIFI_SCAN,IP4,IP6,A
UTOIP4,DNS,VPN,SHARING,SUPPLICANT,AGENTS,SETTINGS,SUSPEND,CORE,DEVICE,OLPC,
WIMAX,INFINIBAND,FIREWALL,ADSL,BOND,VLAN,BRIDGE,DBUS_PROPS,TEAM,CONCHECK,DC
B,DISPATCH</screen>
<para>
This command shows current NetworkManager logging status.
</para>
</example>
<example><title>Changing NetworkManager logging</title>
<screen><prompt>$ </prompt><userinput>nmcli g log level DEBUG domains CORE,ETHER,IP</userinput>
<prompt>$ </prompt><userinput>nmcli g log level INFO domains DEFAULT</userinput></screen>
<para>
The first command makes NetworkManager log in DEBUG level, and only for CORE, ETHER and
IP domains. The second command restores the default logging state. Please refer to the
<link linkend='NetworkManager.conf'><citerefentry><refentrytitle>NetworkManager.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry></link> manual page
for available logging levels and domains.
</para>
</example>
<example><title>Activating a VPN connection profile requiring interactive password input</title>
<screen><prompt>$ </prompt><userinput>nmcli --ask con up my-vpn-con</userinput></screen>
<para>
This command activates a VPN connection profile enabling nmcli to interact with the user
('--ask'): this will allow nmcli to prompt for the VPN password on the command line when
the <emphasis>password-flags</emphasis> are set to '0x02' ('always ask', see
<link linkend='nm-settings'><citerefentry><refentrytitle>nm-settings</refentrytitle><manvolnum>5</manvolnum></citerefentry></link>
).
This is particularly useful for OTP based VPNs, as the user needs to be prompted for the
password each time the connection is activated.
</para>
</example>
<example><title>Adding a bonding master and two slave connection profiles</title>
<screen><prompt>$ </prompt><userinput>nmcli con add type bond ifname mybond0 mode active-backup</userinput>
<prompt>$ </prompt><userinput>nmcli con add type ethernet ifname eth1 master mybond0</userinput>
<prompt>$ </prompt><userinput>nmcli con add type ethernet ifname eth2 master mybond0</userinput></screen>
<para>
This example demonstrates adding a bond master connection and two slaves. The
first command adds a master bond connection, naming the bonding interface
<emphasis>mybond0</emphasis> and using <emphasis>active-backup</emphasis> mode.
The next two commands add slaves connections, both enslaved to <emphasis>mybond0</emphasis>.
The first slave will be bound to <emphasis>eth1</emphasis> interface, the second to
<emphasis>eth2</emphasis>.
</para>
</example>
<example><title>Adding a team master and two slave connection profiles</title>
<screen><prompt>$ </prompt><userinput>nmcli con add type team con-name Team1 ifname Team1 config team1-master-json.conf</userinput>
<prompt>$ </prompt><userinput>nmcli con add type ethernet con-name Team1-slave1 ifname em1 master Team1</userinput>
<prompt>$ </prompt><userinput>nmcli con add type ethernet con-name Team1-slave2 ifname em2 master Team1</userinput></screen>
<para>
This example demonstrates adding a team master connection profile and two slaves. It is
very similar to the bonding example. The first command adds a master team profile, naming
the team interface and the profile <emphasis>Team1</emphasis>. The team configuration
for the master is read from <emphasis>team1-master-json.conf</emphasis> file. Later, you can
change the configuration with <emphasis>modify</emphasis> command
(<emphasis role="bold">nmcli con modify Team1 team.config team1-master-another-json.conf</emphasis>).
The last two commands add slaves profiles, both enslaved to <emphasis>Team1</emphasis>.
The first slave will be bound to <emphasis>em1</emphasis> interface, the second to
<emphasis>em2</emphasis>. The slaves don't specify <emphasis>config</emphasis> and thus
<emphasis>teamd</emphasis> will use its default configuration. You will activate the whole setup
by activating both slaves:
<screen> <prompt>$ </prompt><userinput>nmcli con up Team1-slave1</userinput>
<prompt>$ </prompt><userinput>nmcli con up Team1-slave2</userinput></screen>
By default, the created profiles are marked for auto-activation. But if another
connection has been activated on the device, the new profile won't activate
automatically and you need to activate it manually.
</para>
</example>
<example><title>Adding a bridge and two slave profiles</title>
<screen><prompt>$ </prompt><userinput>nmcli con add type bridge con-name TowerBridge ifname TowerBridge</userinput>
<prompt>$ </prompt><userinput>nmcli con add type ethernet con-name br-slave-1 ifname ens3 master TowerBridge</userinput>
<prompt>$ </prompt><userinput>nmcli con add type ethernet con-name br-slave-2 ifname ens4 master TowerBridge</userinput>
<prompt>$ </prompt><userinput>nmcli con modify TowerBridge bridge.stp no</userinput></screen>
<para>
This example demonstrates adding a bridge master connection and two slaves. The
first command adds a master bridge connection, naming the bridge interface and
the profile as <emphasis>TowerBridge</emphasis>.
The next two commands add slaves profiles, both will be enslaved to
<emphasis>TowerBridge</emphasis>.
The first slave will be tied to <emphasis>ens3</emphasis> interface, the second to
<emphasis>ens4</emphasis>.
The last command will disable 802.1D STP for the TowerBridge profile.
</para>
</example>
<example><title>Adding an ethernet connection profile with manual IP configuration</title>
<screen><prompt>$ </prompt><userinput>nmcli con add con-name my-con-em1 ifname em1 type ethernet \
ip4 192.168.100.100/24 gw4 192.168.100.1 ip4 1.2.3.4 ip6 abbe::cafe</userinput>
<prompt>$ </prompt><userinput>nmcli con mod my-con-em1 ipv4.dns "8.8.8.8 8.8.4.4"</userinput>
<prompt>$ </prompt><userinput>nmcli con mod my-con-em1 +ipv4.dns 1.2.3.4</userinput>
<prompt>$ </prompt><userinput>nmcli con mod my-con-em1 ipv6.dns "2001:4860:4860::8888 2001:4860:4860::8844"</userinput>
<prompt>$ </prompt><userinput>nmcli -p con show my-con-em1</userinput></screen>
<para>
The first command adds an Ethernet connection profile named <emphasis>my-con-em1</emphasis>
that is bound to interface name <emphasis>em1</emphasis>. The profile is configured
with static IP addresses. Three addresses are added, two IPv4 addresses and one IPv6.
The first IP 192.168.100.100 has a prefix of 24 (netmask equivalent of 255.255.255.0).
Gateway entry will become the default route if this profile is activated on em1 interface
(and there is no connection with higher priority). The next two addresses do not
specify a prefix, so a default prefix will be used, i.e. 32 for IPv4 and 128 for IPv6.
The second, third and fourth commands modify DNS parameters of the new connection profile.
The last <emphasis>con show</emphasis> command displays the profile so that all
parameters can be reviewed.
</para>
</example>
<example><title>Convenient field values retrieval for scripting</title>
<screen><prompt>$ </prompt><userinput>nmcli -g ip4.address connection show my-con-eth0</userinput>
192.168.1.12/24</screen>
<screen><prompt>$ </prompt><userinput>nmcli -g ip4.address,ip4.dns connection show my-con-eth0</userinput>
192.168.1.12/24
192.168.1.1</screen>
<screen><prompt>$ </prompt><userinput>nmcli -g ip4 connection show my-con-eth0</userinput>
IP4:192.168.1.12/24:192.168.1.1::192.168.1.1::</screen>
<para>
This example shows retrieval of ip4 connection field values via the --get-values
option. Multiple comma separated fields can be provided: they will be printed one
per line. If a whole section is provided instead of a single field, the name of the
section will be printed followed by all the related field values on the same line.
See also --terse, --mode, --fields and --escape options in <link linkend='nmcli'><citerefentry><refentrytitle>nmcli</refentrytitle><manvolnum>1</manvolnum></citerefentry></link>
manual page for more customized output.
</para>
</example>
<example><title>Escaping colon characters in tabular mode</title>
<screen><prompt>$ </prompt><userinput>nmcli -t -f general -e yes -m tab dev show eth0</userinput>
GENERAL:eth0:ethernet:Intel Corporation:82567LM Gigabit Network Connection:
e1000e:2.1.4-k:1.8-3:00\:22\:68\:15\:29\:21:1500:100 (connected):0 (No reas
on given):/sys/devices/pci0000\:00/0000\:00\:19.0/net/eth0:eth0:yes:yes:no:
ethernet-13:89cbcbc6-dc85-456c-9c8b-bd828fee3917:/org/freedesktop/NetworkMa
nager/ActiveConnection/9</screen>
<para>
This example shows escaping colon characters in tabular mode. It may be
useful for script processing, because ':' is used as a field separator.
</para>
</example>
<example><title>nmcli usage in a NetworkManager dispatcher script to make Ethernet and Wi-Fi mutually exclusive</title>
<programlisting language="bourne">
#!/bin/bash
export LC_ALL=C
enable_disable_wifi ()
{
result=$(nmcli dev | grep "ethernet" | grep -w "connected")
if [ -n "$result" ]; then
nmcli radio wifi off
else
nmcli radio wifi on
fi
}
if [ "$2" = "up" ]; then
enable_disable_wifi
fi
if [ "$2" = "down" ]; then
enable_disable_wifi
fi
</programlisting>
<para>
This dispatcher script makes Wi-Fi mutually exclusive with wired
networking. When a wired interface is connected, Wi-Fi will be set
to airplane mode (rfkilled). When the wired interface is disconnected,
Wi-Fi will be turned back on.
Name this script e.g. 70-wifi-wired-exclusive.sh and put it into /etc/NetworkManager/dispatcher.d/
directory.
See <link linkend='NetworkManager'><citerefentry><refentrytitle>NetworkManager</refentrytitle><manvolnum>8</manvolnum></citerefentry></link>
manual page for more information about NetworkManager dispatcher scripts.
</para>
</example>
<para><emphasis role="bold">Example sessions of interactive connection editor</emphasis></para>
<example><title>Adding an ethernet connection profile in interactive editor (a)</title>
<screen><prompt>$ </prompt><userinput>nmcli connection edit type ethernet</userinput>
===| nmcli interactive connection editor |===
Adding a new '802-3-ethernet' connection
Type 'help' or '?' for available commands.
Type 'describe [&lt;setting&gt;.&lt;prop&gt;]' for detailed property description.
You may edit the following settings: connection, 802-3-ethernet (ethernet),
802-1x, ipv4, ipv6, dcb
<prompt>nmcli&gt; </prompt><userinput>print</userinput>
===========================================================================
Connection details
===========================================================================
connection.id: ethernet-4
connection.uuid: de89cdeb-a3e1-4d53-8fa0-c22546c775f4
connection.interface-name: --
connection.type: 802-3-ethernet
connection.autoconnect: yes
connection.autoconnect-priority: 0
connection.timestamp: 0
connection.read-only: no
connection.permissions:
connection.zone: --
connection.master: --
connection.slave-type: --
connection.secondaries:
connection.gateway-ping-timeout: 0
---------------------------------------------------------------------------
802-3-ethernet.port: --
802-3-ethernet.speed: 0
802-3-ethernet.duplex: --
802-3-ethernet.auto-negotiate: yes
802-3-ethernet.mac-address: --
802-3-ethernet.cloned-mac-address: --
802-3-ethernet.mac-address-blacklist:
802-3-ethernet.mtu: auto
802-3-ethernet.s390-subchannels:
802-3-ethernet.s390-nettype: --
802-3-ethernet.s390-options:
---------------------------------------------------------------------------
ipv4.method: auto
ipv4.dns:
ipv4.dns-search:
ipv4.addresses:
ipv4.gateway: --
ipv4.routes:
ipv4.route-metric: -1
ipv4.ignore-auto-routes: no
ipv4.ignore-auto-dns: no
ipv4.dhcp-client-id: --
ipv4.dhcp-send-hostname: yes
ipv4.dhcp-hostname: --
ipv4.never-default: no
ipv4.may-fail: yes
---------------------------------------------------------------------------
ipv6.method: auto
ipv6.dns:
ipv6.dns-search:
ipv6.addresses:
ipv6.gateway: --
ipv6.routes:
ipv6.route-metric: -1
ipv6.ignore-auto-routes: no
ipv6.ignore-auto-dns: no
ipv6.never-default: no
ipv6.may-fail: yes
ipv6.ip6-privacy: -1 (unknown)
ipv6.dhcp-hostname: --
---------------------------------------------------------------------------
<prompt>nmcli&gt; </prompt><userinput>goto ethernet</userinput>
You may edit the following properties: port, speed, duplex, auto-negotiate,
mac-address, cloned-mac-address, mac-address-blacklist, mtu, s390-subchann
els, s390-nettype, s390-options
nmcli 802-3-ethernet> set mtu 1492
nmcli 802-3-ethernet> b
<prompt>nmcli&gt; </prompt><userinput>goto ipv4.addresses</userinput>
nmcli ipv4.addresses> desc
=== [addresses] ===
[NM property description]
Array of IP addresses.
[nmcli specific description]
Enter a list of IPv4 addresses formatted as:
ip[/prefix], ip[/prefix],...
Missing prefix is regarded as prefix of 32.
Example: 192.168.1.5/24, 10.0.0.11/24
nmcli ipv4.addresses> set 192.168.1.100/24
Do you also want to set 'ipv4.method' to 'manual'? [yes]: yes
nmcli ipv4.addresses>
nmcli ipv4.addresses> print
addresses: 192.168.1.100/24
nmcli ipv4.addresses> back
nmcli ipv4> b
<prompt>nmcli&gt; </prompt><userinput>set ipv4.gateway 192.168.1.1</userinput>
<prompt>nmcli&gt; </prompt><userinput>verify</userinput>
Verify connection: OK
<prompt>nmcli&gt; </prompt><userinput>print</userinput>
===========================================================================
Connection details
===========================================================================
connection.id: ethernet-4
connection.uuid: de89cdeb-a3e1-4d53-8fa0-c22546c775f4
connection.interface-name: --
connection.type: 802-3-ethernet
connection.autoconnect: yes
connection.autoconnect-priority: 0
connection.timestamp: 0
connection.read-only: no
connection.permissions:
connection.zone: --
connection.master: --
connection.slave-type: --
connection.secondaries:
connection.gateway-ping-timeout: 0
---------------------------------------------------------------------------
802-3-ethernet.port: --
802-3-ethernet.speed: 0
802-3-ethernet.duplex: --
802-3-ethernet.auto-negotiate: yes
802-3-ethernet.mac-address: --
802-3-ethernet.cloned-mac-address: --
802-3-ethernet.mac-address-blacklist:
802-3-ethernet.mtu: 1492
802-3-ethernet.s390-subchannels:
802-3-ethernet.s390-nettype: --
802-3-ethernet.s390-options:
---------------------------------------------------------------------------
ipv4.method: manual
ipv4.dns:
ipv4.dns-search:
ipv4.addresses: 192.168.1.100/24
ipv4.gateway: 192.168.1.1
ipv4.routes:
ipv4.route-metric: -1
ipv4.ignore-auto-routes: no
ipv4.ignore-auto-dns: no
ipv4.dhcp-client-id: --
ipv4.dhcp-send-hostname: yes
ipv4.dhcp-hostname: --
ipv4.never-default: no
ipv4.may-fail: yes
---------------------------------------------------------------------------
ipv6.method: auto
ipv6.dns:
ipv6.dns-search:
ipv6.addresses:
ipv6.routes:
ipv6.route-metric: -1
ipv6.ignore-auto-routes: no
ipv6.ignore-auto-dns: no
ipv6.never-default: no
ipv6.may-fail: yes
ipv6.ip6-privacy: -1 (unknown)
ipv6.dhcp-hostname: --
---------------------------------------------------------------------------
<prompt>nmcli&gt; </prompt><userinput>set ipv4.dns 8.8.8.8 8.8.4.4</userinput>
<prompt>nmcli&gt; </prompt><userinput>print</userinput>
===========================================================================
Connection details
===========================================================================
connection.id: ethernet-4
connection.uuid: de89cdeb-a3e1-4d53-8fa0-c22546c775f4
connection.interface-name: --
connection.type: 802-3-ethernet
connection.autoconnect: yes
connection.autoconnect-priority: 0
connection.timestamp: 0
connection.read-only: no
connection.permissions:
connection.zone: --
connection.master: --
connection.slave-type: --
connection.secondaries:
connection.gateway-ping-timeout: 0
---------------------------------------------------------------------------
802-3-ethernet.port: --
802-3-ethernet.speed: 0
802-3-ethernet.duplex: --
802-3-ethernet.auto-negotiate: yes
802-3-ethernet.mac-address: --
802-3-ethernet.cloned-mac-address: --
802-3-ethernet.mac-address-blacklist:
802-3-ethernet.mtu: 1492
802-3-ethernet.s390-subchannels:
802-3-ethernet.s390-nettype: --
802-3-ethernet.s390-options:
---------------------------------------------------------------------------
ipv4.method: manual
ipv4.dns: 8.8.8.8,8.8.4.4
ipv4.dns-search:
ipv4.addresses: 192.168.1.100/24
ipv4.gateway: 192.168.1.1
ipv4.routes:
ipv4.route-metric: -1
ipv4.ignore-auto-routes: no
ipv4.ignore-auto-dns: no
ipv4.dhcp-client-id: --
ipv4.dhcp-send-hostname: yes
ipv4.dhcp-hostname: --
ipv4.never-default: no
ipv4.may-fail: yes
---------------------------------------------------------------------------
ipv6.method: auto
ipv6.dns:
ipv6.dns-search:
ipv6.addresses:
ipv6.gateway: --
ipv6.routes:
ipv6.route-metric: -1
ipv6.ignore-auto-routes: no
ipv6.ignore-auto-dns: no
ipv6.never-default: no
ipv6.may-fail: yes
ipv6.ip6-privacy: -1 (unknown)
ipv6.dhcp-hostname: --
---------------------------------------------------------------------------
<prompt>nmcli&gt; </prompt><userinput>verify</userinput>
Verify connection: OK
<prompt>nmcli&gt; </prompt><userinput>save</userinput>
Connection 'ethernet-4' (de89cdeb-a3e1-4d53-8fa0-c22546c775f4) successfully
saved.
<prompt>nmcli&gt; </prompt><userinput>quit</userinput></screen>
<para>
Example session in the nmcli interactive connection editor.
The scenario creates an Ethernet connection profile with static addressing (IPs and DNS).
</para>
</example>
</refsect1>
<refsect1>
<title>See Also</title>
<para>
<link linkend='nmcli'><citerefentry><refentrytitle>nmcli</refentrytitle><manvolnum>1</manvolnum></citerefentry></link>,
<link linkend='NetworkManager'><citerefentry><refentrytitle>NetworkManager</refentrytitle><manvolnum>8</manvolnum></citerefentry></link>,
<link linkend='NetworkManager.conf'><citerefentry><refentrytitle>NetworkManager.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry></link>,
<link linkend='nm-settings'><citerefentry><refentrytitle>nm-settings</refentrytitle><manvolnum>5</manvolnum></citerefentry></link>,
<link linkend='nm-online'><citerefentry><refentrytitle>nm-online</refentrytitle><manvolnum>1</manvolnum></citerefentry></link>,
<citerefentry><refentrytitle>nm-applet</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
<citerefentry><refentrytitle>nm-connection-editor</refentrytitle><manvolnum>1</manvolnum></citerefentry>
</para>
</refsect1>
</refentry>
Reference in a new issue View git blame Copy permalink