mirror of
https://gitlab.freedesktop.org/NetworkManager/NetworkManager
synced 2024-07-03 08:08:46 +00:00
bbb1f5df2f
We anyway load libjansson with dlopen(), and already before it could happen that libjansson is not available. In that case, we would not crash, but simply proceed without json validation. Since libnm-core no longer uses libjansson directly, but only via "nm-glib-aux/nm-json.h", we can just always compile with that, and use it at runtime. That means, libjansson is not a build dependency for libnm anymore, so we don't need a compile time check. Note that if you build without libjansson, then JANSSON_SONAME is undefined, and loading it will still fail at runtime. So, even if we now always build with all our code enabled, it only works if you actually build with libjansson. Still, it's simpler to drop the conditional build, as the only benefit is a (minimally) smaller build.
74 lines
7.0 KiB
Meson
74 lines
7.0 KiB
Meson
# system paths
|
|
option('systemdsystemunitdir', type: 'string', value: '', description: 'Directory for systemd service files')
|
|
option('system_ca_path', type: 'string', value: '/etc/ssl/certs', description: 'path to system CA certificates')
|
|
option('udev_dir', type: 'string', value: '', description: 'Absolute path of the udev base directory. Set to \'no\' not to install the udev rule')
|
|
option('dbus_conf_dir', type: 'string', value: '', description: 'where D-Bus system.d directory is')
|
|
option('kernel_firmware_dir', type: 'string', value: '/lib/firmware', description: 'where kernel firmware directory is (default is /lib/firmware)')
|
|
option('iptables', type: 'string', value: '', description: 'path to iptables')
|
|
option('dnsmasq', type: 'string', value: '', description: 'path to dnsmasq')
|
|
option('dnssec_trigger', type: 'string', value: '', description: 'path to unbound dnssec-trigger-script')
|
|
|
|
# platform
|
|
option('dist_version', type: 'string', value: '', description: 'Define the NM\'s distribution version string')
|
|
option('session_tracking_consolekit', type: 'boolean', value: true, description: 'Support consolekit session tracking')
|
|
option('session_tracking', type: 'combo', choices: ['systemd', 'elogind', 'no'], value: 'systemd', description: 'Compatibility option to choose one session tracking module')
|
|
option('suspend_resume', type: 'combo', choices: ['upower', 'systemd', 'elogind', 'consolekit', 'auto'], value: 'auto', description: 'Build NetworkManager with specific suspend/resume support')
|
|
option('polkit', type: 'boolean', value: true, description: 'User auth-polkit configuration option.')
|
|
option('config_auth_polkit_default', type: 'combo', choices: ['default', 'true', 'false', 'root-only'], value: 'default', description: 'Default value for configuration main.auth-polkit.')
|
|
option('modify_system', type: 'boolean', value: false, description: 'Allow users to modify system connections')
|
|
option('polkit_agent', type: 'boolean', value: false, description: 'enable polkit agent for clients')
|
|
option('selinux', type: 'boolean', value: true, description: 'Build with SELinux')
|
|
option('systemd_journal', type: 'boolean', value: true, description: 'Use systemd journal for logging')
|
|
option('config_logging_backend_default', type: 'combo', choices: ['default', 'syslog', 'journal'], value: 'default', description: 'Default value for logging.backend')
|
|
option('hostname_persist', type: 'combo', choices: ['default', 'suse', 'gentoo', 'slackware'], value: 'default', description: 'Hostname persist method')
|
|
option('libaudit', type: 'combo', choices: ['yes', 'yes-disabled-by-default', 'no'], value: 'yes', description: 'Build with audit daemon support. yes-disabled-by-default enables support, but disables it unless explicitly configured via NetworkManager.conf')
|
|
|
|
# features
|
|
option('wext', type: 'boolean', value: true, description: 'Enable or disable Linux Wireless Extensions')
|
|
option('wifi', type: 'boolean', value: true, description: 'enable Wi-Fi support')
|
|
option('iwd', type: 'boolean', value: false, description: 'enable iwd support (experimental)')
|
|
option('ppp', type: 'boolean', value: true, description: 'enable PPP/PPPoE support')
|
|
option('pppd', type: 'string', value: '', description: 'path to pppd binary')
|
|
option('pppd_plugin_dir', type: 'string', value: '', description: 'path to the pppd plugins directory')
|
|
option('modem_manager', type: 'boolean', value: true, description: 'Enable new ModemManager1 interface support')
|
|
option('ofono', type: 'boolean', value: false, description: 'Enable oFono support (experimental)')
|
|
option('concheck', type: 'boolean', value: true, description: 'enable connectivity checking support')
|
|
option('teamdctl', type: 'boolean', value: false, description: 'enable Teamd control support')
|
|
option('ovs', type: 'boolean', value: true, description: 'enable Open vSwitch support')
|
|
option('nmcli', type: 'boolean', value: true, description: 'Build nmcli')
|
|
option('nmtui', type: 'boolean', value: true, description: 'Build nmtui')
|
|
option('nm_cloud_setup', type: 'boolean', value: false, description: 'Build nm-cloud-setup, a tool for automatically configure networking in cloud (EXPERIMENTAL!)')
|
|
option('bluez5_dun', type: 'boolean', value: false, description: 'enable Bluez5 DUN support')
|
|
option('ebpf', type: 'combo', choices : ['auto', 'true', 'false'], description: 'Enable eBPF support')
|
|
|
|
# configuration plugins
|
|
option('config_plugins_default', type: 'string', value: '', description: 'Default configuration option for main.plugins setting, used as fallback if the configuration option is unset')
|
|
option('ifcfg_rh', type: 'boolean', value: false, description: 'enable ifcfg-rh configuration plugin (Fedora/RHEL)')
|
|
option('ifupdown', type: 'boolean', value: false, description: 'enable ifupdown configuration plugin (Debian/Ubuntu)')
|
|
|
|
# handlers for resolv.conf
|
|
option('resolvconf', type: 'string', value: '', description: 'Enable resolvconf support')
|
|
option('netconfig', type: 'string', value: '', description: 'Enable SUSE netconfig support')
|
|
option('config_dns_rc_manager_default', type: 'combo', choices: ['symlink', 'file', 'netconfig', 'resolvconf'], value: 'symlink', description: 'Configure default value for main.rc-manager setting')
|
|
|
|
# dhcp clients
|
|
option('dhclient', type: 'string', value: '', description: 'Enable dhclient support')
|
|
option('dhcpcanon', type: 'string', value: '', description: 'Enable dhcpcanon support (experimental)')
|
|
option('dhcpcd', type: 'string', value: '', description: 'Enable dhcpcd support')
|
|
option('config_dhcp_default', type: 'combo', choices: ['dhcpcanon', 'dhclient', 'dhcpcd', 'internal', 'nettools'], value: 'internal', description: 'Default configuration option for main.dhcp setting, used as fallback if the configuration option is unset')
|
|
|
|
# miscellaneous
|
|
option('introspection', type: 'boolean', value: true, description: 'Enable introspection for this build')
|
|
option('vapi', type : 'combo', choices : ['auto', 'true', 'false'], description: 'build Vala bindings')
|
|
option('docs', type: 'boolean', value: false, description: 'use to build documentation')
|
|
option('tests', type: 'combo', choices: ['yes', 'no', 'root'], value: 'yes', description: 'Build NetworkManager tests')
|
|
option('firewalld_zone', type: 'boolean', value: true, description: 'Install and use firewalld zone for shared mode')
|
|
option('more_asserts', type: 'string', value: 'all', description: 'Enable more assertions for debugging (0 = none, 100 = all, default: all)')
|
|
option('more_logging', type: 'boolean', value: true, description: 'Enable more debug logging')
|
|
option('valgrind', type: 'array', value: ['no'], description: 'Use valgrind to memory-check the tests')
|
|
option('valgrind_suppressions', type: 'string', value: '', description: 'Use specific valgrind suppression file')
|
|
option('ld_gc', type: 'boolean', value: true, description: 'Enable garbage collection of unused symbols on linking')
|
|
option('libpsl', type: 'boolean', value: true, description: 'Link against libpsl')
|
|
option('crypto', type: 'combo', choices: ['nss', 'gnutls'], value: 'nss', description: 'Cryptography library to use for certificate and key operations')
|
|
option('qt', type: 'boolean', value: true, description: 'enable Qt examples')
|