![]() Otherwise we're likely interfering with an in-progress activation. Consider the following connections, first two being active: id=bond0a type=bond interface-name=bond0, (Active) id=dummy0a type=dummy interface-name=dummy0 master=bond0a, (Active) id=bond0b type=bond interface-name=bond0 id=dummy0b type=dummy interface-name=dummy0 master=bond0b Note there's two hierarchies with bond0 bond having a dummy0 port, first one (bond0a, dummy0a) being active. Suppose the users wants to bring the other one up (bond0b, dummy0b) and does a "nmcli c up bond0b". This is what happens: 1.) bond0b starts activation due to user request 2.) bond0a starts deactivation due to new activation 3.) dummy0 loses its master, begins deactivation 4.) dummy0 finishes deactivation 5.) both dummy0 being deactivated and bond0b check for slaves enqueues auto-activation check for dummy0 6.) auto-activation picks dummy0a for dummy0 7.) dummy0a begins activation 8.) dummy0a looks for master connection, picks bond0a 9.) bond0a starts activating on bond0, kicks bond0b away 10.) bond0a and dummy0a end up finishing activation 11.) Everybody unhappy :( NM's auto-activation logic is only takes autoconnect priority into account when figuring out a connection to activate and can't be expected to bring up most sensible combination of connection when there's multiple ones for the same devices with complex dependencies. Nevertheless, it shouldn't ever undo the activations if the user is bringing up the connections manually. This patch prevents bringing up of master devices that are not DISCONNECTED and therefore shouldn't be up for grabs. This was previously done for hardware devices only whereas I believe it should be the case for *all* realized devices. https://gitlab.freedesktop.org/NetworkManager/NetworkManager-ci/-/merge_requests/1172 https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1364 |
||
---|---|---|
.gitlab-ci | ||
contrib | ||
data | ||
docs | ||
examples | ||
introspection | ||
m4 | ||
man | ||
po | ||
src | ||
tools | ||
vapi | ||
.clang-format | ||
.dir-locals.el | ||
.git-blame-ignore-revs | ||
.gitignore | ||
.gitlab-ci.yml | ||
.lgtm.yml | ||
.mailmap | ||
.triage-policies.yml | ||
AUTHORS | ||
autogen.sh | ||
ChangeLog | ||
config-extra.h.meson | ||
config-extra.h.mk | ||
config.h.meson | ||
configure.ac | ||
CONTRIBUTING.md | ||
COPYING | ||
COPYING.GFDL | ||
COPYING.LGPL | ||
linker-script-binary.ver | ||
linker-script-devices.ver | ||
linker-script-settings.ver | ||
lsan.suppressions | ||
MAINTAINERS | ||
MAINTAINERS.md | ||
Makefile.am | ||
Makefile.examples | ||
Makefile.glib | ||
Makefile.vapigen | ||
meson.build | ||
meson_options.txt | ||
NEWS | ||
README.md | ||
RELICENSE.md | ||
TODO | ||
valgrind.suppressions |
NetworkManager core daemon has moved to gitlab.freedesktop.org!
git clone https://gitlab.freedesktop.org/NetworkManager/NetworkManager.git
Networking that Just Works
NetworkManager attempts to keep an active network connection available at all times. The point of NetworkManager is to make networking configuration and setup as painless and automatic as possible. NetworkManager is intended to replace default route, replace other routes, set IP addresses, and in general configure networking as NM sees fit (with the possibility of manual override as necessary). In effect, the goal of NetworkManager is to make networking Just Work with a minimum of user hassle, but still allow customization and a high level of manual network control. If you have special needs, we'd like to hear about them, but understand that NetworkManager is not intended for every use-case.
NetworkManager will attempt to keep every network device in the system up and active, as long as the device is available for use (has a cable plugged in, the killswitch isn't turned on, etc). Network connections can be set to 'autoconnect', meaning that NetworkManager will make that connection active whenever it and the hardware is available.
"Settings services" store lists of user- or administrator-defined "connections", which contain all the settings and parameters required to connect to a specific network. NetworkManager will never activate a connection that is not in this list, or that the user has not directed NetworkManager to connect to.
How it works:
The NetworkManager daemon runs as a privileged service (since it must access and control hardware), but provides a D-Bus interface on the system bus to allow for fine-grained control of networking. NetworkManager does not store connections or settings, it is only the mechanism by which those connections are selected and activated.
To store pre-defined network connections, two separate services, the "system settings service" and the "user settings service" store connection information and provide these to NetworkManager, also via D-Bus. Each settings service can determine how and where it persistently stores the connection information; for example, the GNOME applet stores its configuration in GConf, and the system settings service stores its config in distro-specific formats, or in a distro- agnostic format, depending on user/administrator preference.
A variety of other system services are used by NetworkManager to provide network functionality: wpa_supplicant for wireless connections and 802.1x wired connections, pppd for PPP and mobile broadband connections, DHCP clients for dynamic IP addressing, dnsmasq for proxy nameserver and DHCP server functionality for internet connection sharing, and avahi-autoipd for IPv4 link-local addresses. Most communication with these daemons occurs, again, via D-Bus.
Why doesn't my network Just Work?
Driver problems are the #1 cause of why NetworkManager sometimes fails to connect to wireless networks. Often, the driver simply doesn't behave in a consistent manner, or is just plain buggy. NetworkManager supports only those drivers that are shipped with the upstream Linux kernel, because only those drivers can be easily fixed and debugged. ndiswrapper, vendor binary drivers, or other out-of-tree drivers may or may not work well with NetworkManager, precisely because they have not been vetted and improved by the open-source community, and because problems in these drivers usually cannot be fixed.
Sometimes, command-line tools like 'iwconfig' will work, but NetworkManager will fail. This is again often due to buggy drivers, because these drivers simply aren't expecting the dynamic requests that NetworkManager and wpa_supplicant make. Driver bugs should be filed in the bug tracker of the distribution being run, since often distributions customize their kernel and drivers.
Sometimes, it really is NetworkManager's fault. If you think that's the case, please file a bug at:
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/issues
Attaching NetworkManager debug logs from the journal (or wherever your distribution directs syslog's 'daemon' facility output, as /var/log/messages or /var/log/daemon.log) is often very helpful, and (if you can get) a working wpa_supplicant config file helps enormously. See the logging section of file contrib/fedora/rpm/NetworkManager.conf for how to enable debug logging in NetworkManager.