mirror of
https://gitlab.freedesktop.org/NetworkManager/NetworkManager
synced 2024-07-05 17:19:00 +00:00
f57513097f
Configuring the build directory with meson often fails if you don't have
the right Qt dependencies. As they are used only to build some examples,
it is better to autodetect them and, if present, then build the
examples but skip them otherwise.
Still accept forcing qt=true or qt=false as before.
Note that there is a option type called "feature" whose purpose is to
support exactly this: features with enable/disable/auto possible values:
https://mesonbuild.com/Build-options.html#features. However, they don't
accept true/false values so scripts using qt=true/false would start
failing. Since meson 0.60 the "deprecated" argument can be used for
options (https://mesonbuild.com/Build-options.html#deprecated-options),
but that's a too new version of meson.
Also, this fixes some Gitlab-CI failures that happen when generating the
tarball with make distcheck or meson dist. This is because it tries to
check that the tarball content can be configured and built, but it uses
the default configurations so it was using qt=yes. Now it will use
qt=auto, avoiding the failure.
Fixes: 61f0531509 ('gitlab-ci: test re-buildability of distribution tarballs')
79 lines
7.7 KiB
Meson
79 lines
7.7 KiB
Meson
# system paths
|
|
option('systemdsystemunitdir', type: 'string', value: '', description: 'Directory for systemd service files')
|
|
option('system_ca_path', type: 'string', value: '/etc/ssl/certs', description: 'path to system CA certificates')
|
|
option('udev_dir', type: 'string', value: '', description: 'Absolute path of the udev base directory. Set to \'no\' not to install the udev rule')
|
|
option('dbus_conf_dir', type: 'string', value: '', description: 'where D-Bus system.d directory is')
|
|
option('kernel_firmware_dir', type: 'string', value: '/lib/firmware', description: 'where kernel firmware directory is (default is /lib/firmware)')
|
|
option('iptables', type: 'string', value: '', description: 'path to iptables')
|
|
option('nft', type: 'string', value: '', description: 'path to nft')
|
|
option('dnsmasq', type: 'string', value: '', description: 'path to dnsmasq')
|
|
option('modprobe', type: 'string', value: '', description: 'path to modprobe')
|
|
|
|
# platform
|
|
option('dist_version', type: 'string', value: '', description: 'Define the NM\'s distribution version string')
|
|
option('session_tracking_consolekit', type: 'boolean', value: true, description: 'Support consolekit session tracking')
|
|
option('session_tracking', type: 'combo', choices: ['systemd', 'elogind', 'no'], value: 'systemd', description: 'Compatibility option to choose one session tracking module')
|
|
option('suspend_resume', type: 'combo', choices: ['systemd', 'elogind', 'consolekit', 'auto'], value: 'auto', description: 'Build NetworkManager with specific suspend/resume support')
|
|
option('polkit', type: 'boolean', value: true, description: 'User auth-polkit configuration option.')
|
|
option('config_auth_polkit_default', type: 'combo', choices: ['default', 'true', 'false', 'root-only'], value: 'default', description: 'Default value for configuration main.auth-polkit.')
|
|
option('modify_system', type: 'boolean', value: false, description: 'Allow users to modify system connections')
|
|
option('polkit_agent_helper_1', type: 'string', value: '', description: 'Path name to the polkit-agent-helper-1 binary from polkit')
|
|
option('selinux', type: 'boolean', value: true, description: 'Build with SELinux')
|
|
option('systemd_journal', type: 'boolean', value: true, description: 'Use systemd journal for logging')
|
|
option('config_logging_backend_default', type: 'combo', choices: ['default', 'syslog', 'journal'], value: 'default', description: 'Default value for logging.backend')
|
|
option('config_wifi_backend_default', type: 'combo', choices: ['default', 'wpa_supplicant', 'iwd'], value: 'default', description: 'Default value for wifi.backend')
|
|
option('hostname_persist', type: 'combo', choices: ['default', 'suse', 'gentoo', 'slackware'], value: 'default', description: 'Hostname persist method')
|
|
option('libaudit', type: 'combo', choices: ['yes', 'yes-disabled-by-default', 'no'], value: 'yes', description: 'Build with audit daemon support. yes-disabled-by-default enables support, but disables it unless explicitly configured via NetworkManager.conf')
|
|
|
|
# features
|
|
option('wext', type: 'boolean', value: true, description: 'Enable or disable Linux Wireless Extensions')
|
|
option('wifi', type: 'boolean', value: true, description: 'enable Wi-Fi support')
|
|
option('iwd', type: 'boolean', value: false, description: 'enable iwd support (experimental)')
|
|
option('ppp', type: 'boolean', value: true, description: 'enable PPP/PPPoE support')
|
|
option('pppd', type: 'string', value: '', description: 'path to pppd binary')
|
|
option('pppd_plugin_dir', type: 'string', value: '', description: 'path to the pppd plugins directory')
|
|
option('modem_manager', type: 'boolean', value: true, description: 'Enable new ModemManager1 interface support')
|
|
option('mobile_broadband_provider_info_database', type: 'string', value: '', description: 'path to the mobile-broadband-provider-info database')
|
|
option('ofono', type: 'boolean', value: false, description: 'Enable oFono support (experimental)')
|
|
option('concheck', type: 'boolean', value: true, description: 'enable connectivity checking support')
|
|
option('teamdctl', type: 'boolean', value: false, description: 'enable Teamd control support')
|
|
option('ovs', type: 'boolean', value: true, description: 'enable Open vSwitch support')
|
|
option('nmcli', type: 'boolean', value: true, description: 'Build nmcli')
|
|
option('nmtui', type: 'boolean', value: true, description: 'Build nmtui')
|
|
option('nm_cloud_setup', type: 'boolean', value: true, description: 'Build nm-cloud-setup, a tool for automatically configuring networking in cloud')
|
|
option('bluez5_dun', type: 'boolean', value: false, description: 'enable Bluez5 DUN support')
|
|
option('ebpf', type: 'combo', choices: ['auto', 'true', 'false'], description: 'Enable eBPF support')
|
|
|
|
# configuration plugins
|
|
option('config_plugins_default', type: 'string', value: '', description: 'Default configuration option for main.plugins setting, used as fallback if the configuration option is unset')
|
|
option('ifcfg_rh', type: 'boolean', value: false, description: 'enable ifcfg-rh configuration plugin (Fedora/RHEL) (deprecated)')
|
|
option('ifupdown', type: 'combo', choices:['auto', 'true', 'false'], value: 'auto', description: 'enable ifupdown configuration plugin (Debian/Ubuntu)')
|
|
option('config_migrate_ifcfg_rh_default', type: 'boolean', value: false, description: 'The default value of the main.migrate-ifcfg-rh configuration option')
|
|
|
|
# handlers for resolv.conf
|
|
option('resolvconf', type: 'string', value: '', description: 'Enable resolvconf support')
|
|
option('netconfig', type: 'string', value: '', description: 'Enable SUSE netconfig support')
|
|
option('config_dns_rc_manager_default', type: 'combo', choices: ['auto', 'symlink', 'file', 'netconfig', 'resolvconf'], value: 'auto', description: 'Configure default value for main.rc-manager setting')
|
|
|
|
# dhcp clients
|
|
option('dhclient', type: 'string', value: '', description: 'Enable dhclient support')
|
|
option('dhcpcanon', type: 'string', value: '', description: 'Enable dhcpcanon support (experimental)')
|
|
option('dhcpcd', type: 'string', value: '', description: 'Enable dhcpcd support')
|
|
option('config_dhcp_default', type: 'combo', choices: ['dhcpcanon', 'dhclient', 'dhcpcd', 'internal', 'nettools'], value: 'internal', description: 'Default configuration option for main.dhcp setting, used as fallback if the configuration option is unset')
|
|
|
|
# miscellaneous
|
|
option('introspection', type: 'boolean', value: true, description: 'Enable introspection for this build')
|
|
option('vapi', type : 'combo', choices : ['auto', 'true', 'false'], description: 'build Vala bindings')
|
|
option('docs', type: 'boolean', value: false, description: 'use to build documentation')
|
|
option('tests', type: 'combo', choices: ['yes', 'no', 'root'], value: 'yes', description: 'Build NetworkManager tests')
|
|
option('firewalld_zone', type: 'boolean', value: true, description: 'Install and use firewalld zone for shared mode')
|
|
option('more_asserts', type: 'string', value: 'auto', description: 'Enable more assertions for debugging (0 = no, 100 = all, default: auto)')
|
|
option('more_logging', type: 'boolean', value: true, description: 'Enable more debug logging')
|
|
option('valgrind', type: 'array', value: ['no'], description: 'Use valgrind to memory-check the tests')
|
|
option('valgrind_suppressions', type: 'string', value: '', description: 'Use specific valgrind suppression file')
|
|
option('ld_gc', type: 'boolean', value: true, description: 'Enable garbage collection of unused symbols on linking')
|
|
option('libpsl', type: 'boolean', value: true, description: 'Link against libpsl')
|
|
option('crypto', type: 'combo', choices: ['nss', 'gnutls', 'null'], value: 'nss', description: 'Cryptography library to use for certificate and key operations')
|
|
option('qt', type: 'combo', choices: ['auto', 'true', 'false'], value: 'auto', description: 'enable Qt examples')
|
|
option('readline', type: 'combo', choices: ['auto', 'libreadline', 'libedit', 'none'], description: 'Using readline (auto) or libedit)')
|