In the past networkmanager did not allow to manually disconnect devices.
Manually disconnected devices will not be automatically reconnected until one
of the following events occur:
1. user activates a connection for the currently disconnected device
2. network manager awakes from hibernate/suspend
3. network manager is restarted (e.g. reboot)
Add a Disconnect method to generic NMDevice dbus interface; set a new private
autoconnect_inhibit flag if Disconnect method is called through dbus.
Based on this auto activation for devices gets inhibited until one
of the above events occur.
Instead of doing this in every device subclass, do it in the NMDevice
superclass. nm_device_can_activate() already did the same logic that
each of the subclass device_state_changed() handlers were doing to
figure out whether they could do the transition from unavailable
to disconnected, so just use that in NMDevice and kill lots of code.
Since the new PolicyKit does away with easy checking of authorizations,
we get to implement it by ourselves, but that's OK since we can actually
use it for a lot more stuff. So add the GetPermissions call which returns
the permissions the caller actually has, and a signal informing callers
that their permissions might have changed. Hook this all up to
PolicyKit so it's useful.
Make NMSettingsService implement most of the NMSettingsInterface
API to make subclasses simpler, and consolidate exporting of
NMExportedConnection subclasses in NMSettingsService instead of
in 3 places. Make NMSysconfigSettings a subclass of
NMSettingsService and save a ton of code.
Mark activation requests that contain connections to be assumed,
and use that to short-circuit various parts of the activation
process by not touching various device attributes, since they
are already set up. Also ensure the device is not deactivated
when it initially becomes managed, because that would kill the
connection we are about to assume.
The old NMExportedConnection was used for both client and server-side classes,
which was a mistake and made the code very complicated to follow. Additionally,
all PolicyKit operations were synchronous, and PK operations can block for a
long time (ie for user input) before returning, so they need to be async. But
NMExportedConnection and NMSysconfigConnection didn't allow for async PK ops
at all.
Use this opportunity to clean up the mess and create GInterfaces that both
server and client objects implement, so that the connection editor and applet
can operate on generic objects like they did before (using the interfaces) but
can perform specific operations (like async PK verification of callers) depending
on whether they are local or remote or whatever.
The only thing that doesn't work yet is the system-settings service's
"auto eth" connections for ethernet devices that don't have an existing
connection. Might also have issues with unmanaged devices that can't
provide a MAC address until they are brought up, but we'll see.
Don't do anything with WINS servers (dispatcher scripts installed with
samba could certainly update samba's idea of WINS servers), but at least
provide them so that the VPNs that can get upstream WINS servers can
at least make other stuff aware of them.
* introspection/nm-settings-system.xml
system-settings/src/dbus-settings.c
system-settings/src/dbus-settings.h
- Add a "CanModify" property to indicate if any plugins support
connection modification
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@4286 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* include/NetworkManager.h
introspection/nm-device.xml
- Add device state change reason for carrier changes
* src/nm-device-ethernet.c
- (set_carrier): use the carrier change reason when changing device
state in response to carrier changes
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@4203 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* include/NetworkManager.h
introspection/nm-device.xml
include/NetworkManagerVPN.h
- Add a few more state reasons for the device deactivated state
* src/nm-device-interface.c
src/nm-device-interface.h
- (nm_device_interface_deactivate): add a 'reason' argument
* src/nm-device.c
src/nm-device.h
- (nm_device_deactivate, nm_device_take_down): add a 'reason' argument
- (nm_device_state_changed): pass the state change reason to
nm_device_take_down()
- (nm_device_set_managed): take a 'reason' argument, and pass it along
to the state change function
* src/nm-manager.c
src/nm-manager.h
- (remove_one_device, handle_unmanaged_devices, sync_devices,
impl_manager_sleep): pass a reason code to nm_device_set_managed()
- (nm_manager_deactivate_connection): add a 'reason' argument and pass
something reasonable along to VPN deactivation
* src/vpn-manager/nm-vpn-manager.c
src/vpn-manager/nm-vpn-manager.h
- (nm_vpn_manager_deactivate_connection): add a 'reason' argument and
pass that along to nm_vpn_connection_disconnect()
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@4174 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/vpn-manager/nm-vpn-connection.c: Add a signal handler for the
"Failure" signal from VPN plugins, store the failure reason, and
use it when the state is changed to failure.
* introspection/nm-vpn-plugin.xml: Fix the "Failure" signal's type
description.
* include/NetworkManagerVPN.h (NMVPNConnectionStateReason): Add a new
reason to the end of the list to not break the API.
(NMVPNPluginFailure): Move it here (from libnm-glib/nm-vpn-plugin.h)
so it can be shared by plugins and daemon.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@4088 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Implement support for honoring configured and automatic hostnames, and for
setting the configured hostname.
* introspection/nm-ip4-config.xml
src/nm-ip4-config.c
src/nm-ip4-config.h
src/dhcp-manager/nm-dhcp-manager.c
- Remove useless hostname property; it's not really part of the IPv4
config
* introspection/nm-settings-system.xml
libnm-glib/nm-dbus-settings-system.c
libnm-glib/nm-dbus-settings-system.h
- Add SetHostname() call to system settings D-Bus interface
- Add Hostname property to system settings D-Bus interface
- (nm_dbus_settings_system_save_hostname,
nm_dbus_settings_system_get_hostname): implement
* src/nm-device.c
src/nm-device.h
- (nm_device_get_dhcp4_config): implement
* src/nm-manager.c
src/nm-manager.h
- Fetch and track system settings service hostname changes, and proxy
the changes via a GObject property of the manager
* system-settings/src/nm-system-config-interface.c
system-settings/src/nm-system-config-interface.h
- Replace nm_system_config_interface_supports_add() with a capabilities
bitfield
* system-settings/src/nm-system-config-error.c
system-settings/src/nm-system-config-error.h
- Add additional errors
* system-settings/src/dbus-settings.c
system-settings/src/dbus-settings.h
- (get_property, nm_sysconfig_settings_class_init): add hostname
property; first plugin returning a hostname wins
- (impl_settings_add_connection): use plugin capabilities instead of
nm_system_config_interface_supports_add()
- (impl_settings_save_hostname): implement hostname saving
* src/NetworkManagerPolicy.c
- (lookup_thread_run_cb, lookup_thread_worker, lookup_thread_new,
lookup_thread_die): implement an asynchronous hostname lookup thread
which given an IPv4 address tries to look up the hostname for that
address with reverse DNS
- (get_best_device): split out best device code from
update_routing_and_dns()
- (update_etc_hosts): update /etc/hosts with the machine's new hostname
to preserve the 127.0.0.1 reverse mapping that so many things require
- (set_system_hostname): set a given hostname
- (update_system_hostname): implement hostname policy; a configured
hostname (from the system settings service) is used if available,
otherwise an automatically determined hostname from DHCP, VPN, etc.
If there was no automatically determined hostname, reverse DNS of
the best device's IP address will be used, and as a last resort the
hostname 'localhost.localdomain' is set.
- (update_routing_and_dns): use get_best_device(); update the system
hostname when the network config changes
- (hostname_changed): update system hostname if the system settings
service signals a hostname change
- (nm_policy_new): list for system settings service hostname changes
- (nm_policy_destroy): ensure that an in-progress hostname lookup thread
gets told to die
* system-settings/plugins/keyfile/plugin.c
system-settings/plugins/ifcfg-suse/plugin.c
- (get_property, sc_plugin_ifcfg_class_init): implement hostname and
capabilities properties
* system-settings/plugins/ifcfg-fedora/shvar.c
- (svOpenFile): re-enable R/W access of ifcfg files since the plugin
writes out /etc/sysconfig/network now
* system-settings/plugins/ifcfg-fedora/plugin.c
- (plugin_get_hostname): get hostname from /etc/sysconfig/network
- (plugin_set_hostname): save hostname to /etc/sysconfig/network
- (sc_network_changed_cb): handle changes to /etc/sysconfig/network
- (sc_plugin_ifcfg_init): monitor /etc/sysconfig/network for changes
- (get_property, set_property, sc_plugin_ifcfg_class_init): implement
hostname get/set and capabilities get
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@4077 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Add connection UUIDs, since connection names can be changed, and since
old-style connection IDs could change over the life of the connection. The
UUID should be assigned at connection creation time, be stable for a given
connection, and should be unique among all connections for a given settings
service.
* configure.in
libnm-util/Makefile.am
- Require libuuid
* introspection/nm-exported-connection.xml
- Remove "GetID" method
* libnm-glib/nm-dbus-connection.c
libnm-glib/nm-settings.c
libnm-glib/nm-settings.h
- Remove id-related stuff
* libnm-util/nm-utils.c
libnm-util/nm-utils.h
libnm-util/libnm-util.ver
- (nm_utils_uuid_generate, nm_utils_uuid_generate_from_string): Add
utility functions to generate UUIDs
* libnm-util/nm-setting-connection.c
libnm-util/nm-setting-connection.h
- Add 'uuid' member to the connection setting
- (verify): require valid 'uuid' for a valid connection
* system-settings/plugins/ifcfg-fedora/nm-ifcfg-connection.c
system-settings/plugins/ifcfg-fedora/reader.c
system-settings/plugins/ifcfg-suse/nm-suse-connection.c
system-settings/plugins/ifcfg-suse/parser.c
system-settings/plugins/keyfile/nm-keyfile-connection.c
system-settings/src/main.c
- Remove id-related stuff
- Give connections UUIDs where needed
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@4013 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* include/NetworkManager.h
introspection/nm-device.xml
- Add a "missing firmware" device state reason
* src/NetworkManagerSystem.c
src/NetworkManagerSystem.h
- (nm_system_device_set_up_down): add a no_firmware argument
- (nm_system_device_set_up_down_with_iface): if the result of setting
IFF_UP is ENOENT, that almost always means missing firmware
* src/backends/NetworkManagerGeneric.c
src/nm-device-ethernet.c
src/nm-device-private.h
src/nm-device-wifi.c
src/nm-device.c
src/nm-device.h
src/nm-hso-gsm-device.c
src/vpn-manager/nm-vpn-connection.c
- Pass no_firmware along; check it where appropriate
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3983 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Revert most of the 'hostname' patch. Too much stuff still breaks when
hostname is updated at runtime. Distros or users who want hostname updates
can use dispatcher scripts to update the hostname if they need it.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3945 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* introspection/nm-settings-system.xml
system-settings/src/dbus-settings.c
system-settings/src/dbus-settings.h
- Add a 'Hostname' property (rw) which represents the configured
hostname and domain of the system, if any
* system-settings/src/nm-system-config-error.c
system-settings/src/nm-system-config-error.h
system-settings/src/nm-system-config-interface.c
system-settings/src/nm-system-config-interface.h
- Add a 'hostname' property to the plugin interface
- Add a method to send updated hostname to plugins to save in their
backing configuration store
* system-settings/plugins/keyfile/nm-keyfile-connection.c
system-settings/plugins/keyfile/plugin.c
system-settings/plugins/keyfile/writer.c
system-settings/plugins/keyfile/writer.h
system-settings/plugins/ifcfg-suse/plugin.c
- Add minimal hostname support
* system-settings/plugins/ifcfg-fedora/plugin.c
- Add support for updating system hostname in /etc/sysconfig/network
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3941 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-glib/nm-ip4-config.c
libnm-glib/nm-ip4-config.h
- Add 'routes' property
* libnm-util/nm-setting-vpn.c
libnm-util/nm-setting-vpn.h
- Remove 'routes' property
* libnm-util/nm-setting-ip4-config.c
libnm-util/nm-setting-ip4-config.h
- 'ignore-dhcp-dns' renamed to 'ignore-auto-dns'
- Add 'ignore-auto-routes' property
- 'routes' exposed over D-Bus is now an array of array of uint (4) to
accomodate route metrics
- 'routes' exposed in C is now a list of NMSettingIP4Route structures
* libnm-util/nm-utils.c
libnm-util/nm-utils.h
- Add helpers for marshalling IP4 routes
* src/NetworkManagerUtils.c
- (nm_utils_merge_ip4_config): handle property renames and new route
structure
* src/NetworkManagerSystem.c
- (nm_system_device_set_ip4_route, nm_system_device_set_from_ip4_config,
nm_system_vpn_device_set_from_ip4_config): respect route metrics
* src/dhcp-manager/nm-dhcp-manager.c
- (nm_dhcp_manager_get_ip4_config): handle new route structure
* system-settings/plugins/ifcfg-fedora/reader.c
system-settings/plugins/ifcfg-fedora/writer.c
- Handle routes separately from addresses now that routes have a different
format
* introspection/nm-ip4-config.xml
src/nm-ip4-config.c
src/nm-ip4-config.h
- Rename internal routing functions
- 'static-routes' renamed to 'routes'
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3898 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* introspection/Makefile.am
introspection/nm-device.xml
introspection/nm-dhcp4-config.xml
- Add bits for the DHCP4Config property of the device, and the DHCP4Config
itself
* src/nm-device-interface.c
src/nm-device-interface.h
- Add the DHCP4Config property
* src/nm-device.c
- Keep track of DHCP4 options via a new DHCP4Config property and notify
D-Bus clients when it changes
* src/nm-dhcp4-config.c
src/nm-dhcp4-config.h
- Simple object to store DHCP4 options, export them over D-Bus, and
notify when they change
* src/dhcp-manager/nm-dhcp-manager.c
src/dhcp-manager/nm-dhcp-manager.h
- (nm_dhcp_manager_set_dhcp4_config, copy_dhcp4_config_option): copy and
filter server-returned DHCP options into an NMDHCP4Config object
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3829 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Modify the NMDevice::state-changed signal to include the previous state
and reason. Enables the applet to provide more information why device
activation failed.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3819 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* introspection/nm-active-connection.xml
introspection/nm-vpn-connection.xml
libnm-glib/nm-active-connection.c
src/nm-activation-request.c
src/nm-active-connection.h
src/vpn-manager/nm-vpn-connection.c
- Remove "SharedServiceName" and "SharedConnection" bits from the D-Bus
and libnm-glib API since sharing didn't get implemented that way
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3797 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Tambet Ingo <tambet@gmail.com>
* src/ppp-manager/nm-ppp-manager.c: Add ppp stats monitoring, signal the
changes.
* src/nm-serial-device.c: Monitor "ppp-stats" signals from NMPPPManager. Add
a signal to emit these changes over dbus.
* src/Makefile.am: Genereate nm-serial-device-glue.
* libnm-glib/nm-serial-device.[ch]: Implement.
* libnm-glib/nm-cdma-device.[ch]
libnm-glib/nm-gsm-device.[ch]: Inherit from NMSerialDevice.
* libnm-glib/Makefile.am: Add nm-serial-device.[ch].
* introspection/nm-device-serial.xml: Implement.
* introspection/all.xml: Fix a couple of typos, add nm-device-serial.xml.
* introspection/Makefile.am: Add nm-device-serial.xml.
* include/NetworkManager.h: Add a DBus interface for serial device.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3740 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Use PolicyKit to authorize the system settings' AddConnection method
and the system settings connections' Update and Delete methods.
* libnm-glib/nm-settings.c (impl_exported_connection_update)
(impl_exported_connection_delete, nm_exported_connection_update)
(nm_exported_connection_delete): Return boolean and fill GError
to notify the callers of the reasons why it might have failed.
* libnm-glib/nm-dbus-settings-system.c
(nm_dbus_settings_system_add_connection): Return the error from dbus
call so that the callers can see why it failed.
* libnm-glib/nm-dbus-connection.c (update, delete): Update the
signatures.
* system-settings/src/nm-polkit-helpers.[ch]: Implement.
* system-settings/src/nm-sysconfig-connection.[ch]: Implement. New
abstract base class that checks PolicyKit permissions.
* system-settings/src/dbus-settings.c:
(impl_settings_add_connection): Check the policy before carring out
the request.
* system-settings/plugins/keyfile/nm-keyfile-connection.c:
Inherit from NMSysconfigConnection, check the policies before
allowing updating or removing.
* system-settings/plugins/ifcfg-suse/nm-suse-connection.c:
Inherit from NMSysconfigConnection.
* introspection/nm-exported-connection.xml: Annotate "Update" and
"Delete" methods with async flag so that the implementations can get
access to DBusGMethodInvocation.
* system-settings/src/dbus-settings.c
(settings_add_connection_check_privileges): Implement.
(impl_settings_add_connection): Check the privileges before adding a new
connection. Improve error reporting.
* introspection/nm-settings-system.xml: Make the 'AddConnection' method
async so that the implementation can access DBusGMethodInvocation.
* configure.in: Check for PolicyKit.
* policy/org.freedesktop.network-manager-settings.system.policy:
New file.
* policy/Makefile.am: Install the policy file.
* configure.in: Add 'policy' subdir.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3646 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/dhcp-manager/nm-dhcp-manager.c
- (nm_dhcp_manager_get_ip4_config): clean up; update for changes to
NMIP4Config to support multiple IP addresses
* src/NetworkManagerUtils.c
- (nm_utils_merge_ip4_config): update for multiple IP addresses
* src/nm-ip4-config.c
src/nm-ip4-config.h
- Store a list of IPv4 address/netmask/gateway tuples
- (nm_ip4_config_get_gateway, nm_ip4_config_set_gateway,
nm_ip4_config_get_netmask, nm_ip4_config_set_netmask,
nm_ip4_config_get_broadcast, nm_ip4_config_set_broadcast,
nm_ip4_config_set_address): remove
- (nm_ip4_config_take_address, nm_ip4_config_add_address,
nm_ip4_config_replace_address, nm_ip4_config_get_num_addresses):
new functions; handle multiple IPv4 addresses
* src/nm-device.c
src/ppp-manager/nm-ppp-manager.c
src/vpn-manager/nm-vpn-connection.c
src/NetworkManagerPolicy.c
test/nm-tool.c
libnm-glib/libnm-glib-test.c
- update for changes to NMIP4Config for multiple IPv4 addresses
* src/NetworkManagerSystem.c
- (nm_system_device_set_ip4_route): don't add the route if any address
is on the same subnet as the destination
- (check_one_address): ignore the exact match, just match family and
interface index
- (add_ip4_addresses): add all IPv4 addresses in an NMIP4Config to
an interface
- (nm_system_device_set_from_ip4_config): use add_ip4_addresses()
- (nm_system_vpn_device_set_from_ip4_config): use add_ip4_addresses()
* introspection/nm-ip4-config.xml
- Remove 'address', 'gateway', 'netmask', and 'broadcast' properties
- Add 'addresses' property which is an array of (uuu) tuples of
address/netmask/gateway
* libnm-util/nm-setting-ip4-config.c
- (set_property): use ip-address <-> GValue converters from nm-utils.c
* libnm-glib/nm-ip4-config.c
libnm-glib/nm-ip4-config.h
- Handle D-Bus interface changes to support multiple IP addresses
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3637 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Implement GKeyFile system settings plugin.
Implement writing system settings (currently supported only by GKeyFile plugin).
* system-settings/src/main.c:
* system-settings/src/dbus-settings.c: Move the communication with plugins
from main.c to dbus-settings.c. Makes it possible to talk to all registered
plugins for adding/updating/removing connections.
* system-settings/src/nm-system-config-interface.c
(nm_system_config_interface_add_connection): Implement
(nm_system_config_interface_update_connection): Implement.
(nm_system_config_interface_remove_connection): Implement.
* system-settings/plugins/keyfile/Makefile.am:
* system-settings/plugins/keyfile/plugin.[ch]:
* system-settings/plugins/keyfile/writer.[ch]:
* system-settings/plugins/keyfile/reader.[ch]: Implement.
* system-settings/plugins/Makefile.am: Add GKeyFile plugin.
* configure.in: Generate GKeyFile Makefile.
* libnm-glib/nm-settings.c (impl_exported_connection_get_id): Fix a memory
corruption, need to duplicate the returned string.
(impl_exported_connection_update): Implement.
(impl_exported_connection_delete): Implement.
* introspection/nm-settings-system.xml: Add "AddConnection" method.
* introspection/nm-exported-connection.xml: Add "Update" and "Delete" methods.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3587 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* include/NetworkManager.h
- Add NMActiveConnectionState enum
* introspection/nm-active-connection.xml
introspection/nm-vpn-connection.xml
- Add 'State' property for overall active connection state
- Add 'Default' property, when True means this active connection
has the default route
- Add PropertyChanged signals so changes actually go out over the bus
* src/nm-active-connection.h
- Add defines for State & Default properties
* src/nm-activation-request.c
- Add 'state' and 'default' properties, hook up to device 'state-changed'
signal to determine active connection state
* src/vpn-manager/nm-vpn-connection.c
src/vpn-manager/nm-vpn-connection.h
src/vpn-manager/nm-vpn-manager.c
src/vpn-manager/nm-vpn-service.c
- Rename old 'state' to 'vpn-state'
- Rename nm_vpn_connection_get_state() -> nm_vpn_connection_get_vpn_state()
- Add 'state' and 'default' properties, hook up to the vpn connection's
'vpn-state-changed' signal
* libnm-glib/nm-active-connection.c
libnm-glib/nm-active-connection.h
- Add new 'state' and 'default' properties and accessors
* libnm-glib/nm-vpn-connection.c
libnm-glib/nm-vpn-connection.h
- Rename old 'state' property to 'vpn-state'
- Add new 'state' and 'default' properties and accessors
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3582 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Remove exposure of wireless-tools mode types in the API.
* include/NetworkManager.h
- Define NM80211Mode enum
* introspection/generic-types.xml
- Describe NM_802_11_MODE enum
- Remove IW_MODE_* enum
* introspection/nm-access-point.xml
libnm-glib/nm-access-point.c
libnm-glib/nm-access-point.h
- 'mode' is now of type NM80211Mode, a DBUS_TYPE_UINT
* introspection/nm-device-802-11-wireless.xml
libnm-glib/nm-device-802-11-wireless.c
libnm-glib/nm-device-802-11-wireless.h
- 'mode' is now of type NM80211Mode, a DBUS_TYPE_UINT
* libnm-util/nm-setting-wireless.c
src/NetworkManagerAP.c
src/NetworkManagerAP.h
src/nm-device-802-11-wireless.c
src/nm-device-802-11-wireless.h
test/nm-tool.c
- Use NM80211Mode not IW_MODE_*
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3562 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* include/NetworkManager.h
- Remove the DOWN and CANCELLED device states
- Add UNMANAGED and UNAVAILABLE device states
- Document the device states
* introspection/nm-device.xml
src/nm-device-interface.c
src/nm-device-interface.h
- Add the 'managed' property
* test/nm-tool.c
- (detail_device): print out device state
* src/NetworkManagerSystem.h
src/backends/NetworkManagerArch.c
src/backends/NetworkManagerDebian.c
src/backends/NetworkManagerFrugalware.c
src/backends/NetworkManagerGentoo.c
src/backends/NetworkManagerMandriva.c
src/backends/NetworkManagerPaldo.c
src/backends/NetworkManagerRedHat.c
src/backends/NetworkManagerSlackware.c
src/backends/NetworkManagerSuSE.c
- (nm_system_device_get_system_config, nm_system_device_get_disabled
nm_system_device_free_system_config): remove; they were unused and
their functionality should be re-implemented in each distro's
system settings service plugin
* src/nm-gsm-device.c
src/nm-gsm-device.h
src/nm-cdma-device.c
src/nm-cdma-device.h
- (*_new): take the 'managed' argument
* src/nm-device.c
- (nm_device_set_address): remove, fold into nm_device_bring_up()
- (nm_device_init): start in unmanaged state, not disconnected
- (constructor): don't start device until the system settings service
has had a chance to figure out if the device is managed or not
- (nm_device_deactivate, nm_device_bring_up, nm_device_bring_down):
don't set device state here, let callers handle that as appropriate
- (nm_device_dispose): don't touch the device if it's not managed
- (set_property, get_property, nm_device_class_init): implement the
'managed' property
- (nm_device_state_changed): bring the device up if its now managed,
and deactivate it if it used to be active
- (nm_device_get_managed, nm_device_set_managed): do the right thing
with the managed state
* src/nm-hal-manager.c
- (wired_device_creator, wireless_device_creator, modem_device_creator):
take initial managed state and pass it along to device constructors
- (create_device_and_add_to_list): get managed state and pass to
type creators
* src/nm-device-802-11-wireless.c
- (real_can_activate): fold in most of
nm_device_802_11_wireless_can_activate()
- (can_scan): can't scan in UNAVAILABLE or UNMANAGED
- (link_timeout_cb): instead of deactivating, change device state and
let the device state handler to it
- (real_update_hw_address): clean up
- (state_changed_cb): when entering UNAVAILABLE state, schedule an idle
handler to transition to DISCONNECTED if the device isn't rfkilled
* src/nm-device-802-3-ethernet.c
- (set_carrier): move above callers and get rid of prototype
- (device_state_changed): when entering UNAVAILABLE state, schedule an
idle handler to transition to DISCONNECTED if the device has a
carrier
- (real_update_hw_address): clean up
- (link_timeout_cb, ppp_state_changed): change state instead of calling
deactivation directly as deactivation doesn't change state anymore
* src/NetworkManagerPolicy.c
- (schedule_activate_check): yay, remove wireless_enabled hack since
the NMManager and wireless devices work that out themselves now
- (device_state_changed): change to a switch and update for new device
states
- (device_carrier_changed): remove; device handles this now through
state changes
- (device_added): don't care about carrier any more; the initial
activation check will happen when the device transitions to
DISCONNECTED
* src/nm-manager.c
- (dispose): clear unmanaged devices
- (handle_unmanaged_devices): update unmanaged device list and toggle
the managed property on each device when needed
- (system_settings_properties_changed_cb): handle signals from the
system settings service
- (system_settings_get_unmanaged_devices_cb): handle callback from
getting the unmanaged device list method call
- (query_unmanaged_devices): ask the system settings service for its
list of unmanaged devices
- (nm_manager_name_owner_changed, initial_get_connections): get unmanaged
devices
- (manager_set_wireless_enabled): push rfkill state down to wireless
devices directly and let them handle the necessary state transitions
- (manager_device_state_changed): update for new device states
- (nm_manager_add_device): set initial rfkill state on wireless devices
- (nm_manager_remove_device): don't touch the device if it's unmanaged
- (nm_manager_activate_connection): return error if the device is
unmanaged
- (nm_manager_sleep): handle new device states correctly; don't change
the state of unavailable/unmanaged devices
* libnm-glib/nm-device-802-11-wireless.c
- (state_changed_cb): update for new device states
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3540 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* introspection/nm-settings-system.xml
introspection/Makefile.am
- Define the unmanaged devices interface for the system settings service
* system-settings/src/nm-system-config-hal-manager.c
system-settings/src/nm-system-config-hal-manager.h
system-settings/src/nm-system-config-hal-manager-private.h
system-settings/src/Makefile.am
- Add a lightweight HAL manager object for tracking network devices for
the purpose of determining unmanaged devices and which devices need
the default DHCP connections
* system-settings/src/nm-system-config-interface.c
system-settings/src/nm-system-config-interface.h
- (nm_system_config_interface_init): add the HAL manager as an argument
- (nm_system_config_interface_get_unmanaged_devices): implement
- Define 'unmanaged-devices-changed' signal
* system-settings/src/dbus-settings.c
system-settings/src/dbus-settings.h
- Implement the unmanaged devices interface; some cleanups
* system-settings/plugins/ifcfg-suse/plugin.c
- Fixup for plugin interface changes
* system-settings/plugins/ifcfg-fedora/plugin.c
- (get_ether_device_udi): new function; find the device that has
a specified MAC address and return its UDI
- (get_udi_for_connection): new function; try to find the specific
device a connection is locked to, if any
- (device_added_cb, device_removed_cb): update unmanaged device list in
response to HAL events
- (get_unmanaged_devices): new function; return unmanaged device list
- (build_one_connection): set the connection's locked device, if any
- (write_auto_wired_connection): remove
- (kill_old_auto_wired_file): remove the ifcfg-Auto Wired file if found
- (handle_connection_changed): alert listeners that the unmanaged device
list has changed
- (init): fixup for plugin interface changes, implement unmanaged devices
* system-settings/plugins/ifcfg-fedora/parser.c
system-settings/plugins/ifcfg-fedora/parser.h
- (connection_data_free): clean up connection UDI
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3537 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Rework VPN connection handling for a more consistent D-Bus API. The
VPNManager object has been removed, and active VPN connections are now the
same as any other active connection. The Manager object's ActivateConnection
and DeactivateConnection methods are used to start and stop a VPN connection,
and the VPNConnection objects are subclasses of the ActiveConnection objects.
When activating a VPN connection, pass the path of the active connection
to which the VPN connection is tied in the 'specific_object' argument.
Consequently, the libnm-glib API has been reworked to match this arrangement,
with the VPNManager object removed, and the NMVPNConnection objects now
being subclasses of NMActiveConnection.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3504 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* introspection/nm-manager.xml
introspection/nm-manager-client.xml
- (ActivateConnection): return the object path of the active connection
on success
- (GetActiveConnections): remove
- (DeactivateConnection): new function; deactivate a currently active
connection
- Add an ActiveConnections property which returns an array of
active connection object paths
* introspection/nm-device.xml
- (Deactivate): remove
* introspection/all.xml
- Add ActiveConnection introspection
* introspection/nm-active-connection.xml
- Add the ActiveConnection object
* include/NetworkManager.h
- Add the Connection.Active D-Bus interface
* src/nm-device-interface.c
- (impl_device_deactivate): remove
* src/nm-activation-request.c
src/nm-activation-request.c
src/Makefile.am
- Implement the Connection.Active D-Bus interface
* src/nm-manager.c
- (get_property, nm_manager_class_init): add ACTIVE_CONNECTIONS property
- (nm_manager_activate_device): return the active connection path
- (connection_added_default_handler, impl_manager_activate_connection):
return the active connection to the caller
- (add_one_connection_element, impl_manager_get_active_connections):
remove
- (impl_manager_deactivate_connection): new function; deactivate an
active connection
* libnm-glib/nm-device.c
libnm-glib/nm-device.h
- Remove Deactivate() function
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3484 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* introspection/nm-manager.xml
introspection/nm-manager-client.xml
- Rename the ActivateDevice method to ActivateConnection to better
reflect it's usage; it's arguments get reordered a bit too
- Convert GetActiveConnections method return from a struct to a dict
* include/NetworkManager.h
- Define the dict keys for return value of GetActiveConnections
* src/nm-manager.c
- impl_manager_activate_device -> impl_manager_activate_connection
- (add_one_connection_element): return a populated hash table, not
a structure
* libnm-glib/nm-client.c
libnm-glib/nm-client.h
- nm_client_activate_device -> nm_client_activate_connection
- nm_client_free_active_connection_element -> nm_client_free_active_connections_element
- (nm_client_get_active_connections): return a GSList of GHashTables,
instead of the custom structures. Each element of the returned list
must be freed with nm_client_free_active_connections_element()
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3482 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Split the 802.1x bits out of the wireless-security setting so they are
generalized enough for wired 802.1x to use too.
* introspection/nm-exported-connection.xml
- GetSecrets now returns 'a{sa{sv}}' (a hash of settings hashes) instead
of just a hash of the secrets for one setting
* libnm-util/nm-setting-wireless-security.c
libnm-util/nm-setting-wireless-security.h
- Remove 802.1x-specific stuff
- Added leap-username and leap-password properties for old-school LEAP
* src/nm-device.c
src/nm-device.h
- (connection_secrets_updated_cb): take a list of updated settings names,
not just one
* src/supplicant-manager/nm-supplicant-config.c
src/supplicant-manager/nm-supplicant-config.h
- (nm_supplicant_config_add_setting_wireless_security): remove 802.1x
specific stuff; fix for updated LEAP bits; punt 802.1x stuff
to nm_supplicant_config_add_setting_8021x()
- (nm_supplicant_config_add_setting_8021x): add an 802-1x setting to
the supplicant config
* src/nm-device-802-11-wireless.c
- (build_supplicant_config): pass in the 802.1x setting too, if any
- (real_connection_secrets_updated): take a list of updated settings
names, not just one
* src/nm-device-802-3-ethernet.c
src/nm-cdma-device.c
src/nm-gsm-device.c
- (real_connection_secrets_updated_cb): take a list of updated settings
names, not just one
* src/nm-activation-request.c
src/nm-activation-request.h
- (nm_act_request_class_init): the 'connection-secrets-updated' signal
now passes a list of updated settings names, not just one
- (update_one_setting): new function; handle one updated setting
- (get_secrets_cb): handle multiple settings returned from the
settings service; have to be careful of ordering here as there are
some dependencies between settings (ex. wireless-security and 802.1x
in some cases)
* src/marshallers/nm-marshal.list
- new marshaller for connection-secrets-updated signal
* libnm-util/nm-setting-8021x.c
- Add back the 'pin' and 'psk' settings, for EAP-SIM and EAP-PSK auth
methods
- (verify): a valid 'eap' property is now required
* libnm-util/nm-connection.c
- (register_default_settings): add priorities to settings; there are
some dependencies between settings, and during the need_secrets
calls this priority needs to be respected. For example, only the
wireless-security setting knows whether or not the connection is
going to use 802.1x or now, so it must be asked for secrets before
any existing 802.1x setting is
- (nm_connection_lookup_setting_type): expose
* libnm-util/nm-setting-wireless.c
- (verify): should verify even if all_settings is NULL; otherwise won't
catch the case where there is missing security
* libnm-util/nm-setting-wireless-security.c
- Remove everything to do with 802.1x
- Add old-school LEAP specific properties for username and password
- (need_secrets): rework LEAP secrets checking
- (verify): rework for LEAP and 802.1x verification
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3470 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Move the 'carrier' property from NMDevice to NMDevice8023Ethernet;
convert the libnm-glib NMDevice8023Ethernet to cached properties
* introspection/nm-device-802-3-ethernet.xml
- New 'Carrier' property
- New 'PropertiesChanged' signal
* introspection/nm-device.xml
- Remove 'Carrier' property
- Remove 'CarrierChanged' signal
* src/nm-device-interface.c
src/nm-device-interface.h
- (nm_device_interface_init): remove 'carrier' property and
'carrier-changed' signal
* src/nm-device.c
src/nm-device.h
- (nm_device_get_carrier, nm_device_set_carrier): remove
- (nm_device_activate_stage5_ip_config_commit): don't bother updating
the link here; wired device will handle that
- (handle_dhcp_lease_change): don't bother updating link here
- (get_property, nm_device_class_init): remove carrier property
* src/nm-device-802-11-wireless.c
- (real_update_link, nm_device_802_11_wireless_class_init): remove
real_update_link(); wireless devices don't use carrier at all
- (link_timeout_cb, supplicant_iface_state_cb_handler,
supplicant_iface_connection_state_cb_handler,
supplicant_mgr_state_cb_handler): remove anything to do with carrier
* src/nm-device-802-3-ethernet.c
src/nm-device-802-3-ethernet.h
- (nm_device_802_3_ethernet_carrier_on,
nm_device_802_3_ethernet_carrier_off, constructor): use set_carrier()
instead of nm_device_set_carrier()
- (device_state_changed): update link from sysfs on activation;
replaces real_update_link()
- (real_update_link): remove, replaced by device_state_changed()
- (nm_device_802_3_ethernet_get_carrier, set_carrier): new functions
- (nm_device_802_3_ethernet_get_speed): move up with other getters/setters
- (real_get_generic_capabilities, real_can_interrupt_activation): use
new get_carrier function
- (get_property): add 'carrier' property
- (nm_device_802_3_ethernet_class_init): add 'carrier' property and
hook into property-changed signal helper
* src/NetworkManagerPolicy.c
- (device_carrier_changed): will only ever be called with a wired device
- (device_added): only hook up to carrier-changed for wired devices
* libnm-glib/nm-device.c
libnm-glib/nm-device.h
- (constructor, nm_device_class_init): remove carrier-changed signal
- (device_carrier_changed_proxy): remove; unused
- (nm_device_get_carrier): remove; carrier a property of wired devices
* libnm-glib/nm-device-802-3-ethernet.c
libnm-glib/nm-device-802-3-ethernet.h
- Convert to cached properties like AP and Wireless objects
- (nm_device_802_3_ethernet_get_hw_address): now returns a 'const char *'
instead of a 'char *', return value should not be freed
- (nm_device_802_3_ethernet_get_carrier): return current carrier status
- (constructor): hook into properties-changed helper
- (set_property, get_property): new functions
- (nm_device_802_3_ethernet_class_init): export GObject properties
* test/nm-tool.c
- (detail_device): strdup the wired hardware address too since it's
cached now
* libnm-glib/libnm-glib-test.c
- (dump_wired): strdup the wired hardware address too since it's
cached now
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3428 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Change manager's StateChange signal to StateChanged for consistency.
* introspection/nm-manager.xml
- Add 'StateChanged' signal
- Move 'StateChange' down to the deprecated section
* src/nm-hal-manager.c
- (nm_hal_manager_new): connect to 'state-changed' instead
* src/NetworkManagerPolicy.c
- (nm_policy_new): connect to 'state-changed' instead
* src/nm-manager.c
src/nm-manager.h
- (nm_manager_update_state): emit both 'state-changed' and 'state-change'
- (nm_manager_class_init): add 'state-changed' and not the deprecation
of 'state-change'
* libnm-glib/nm-client.c
libnm-glib/nm-client.h
- (constructor, nm_client_class_init, client_state_changed_proxy):
track and proxy 'state-changed' instead of 'state-change'
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3393 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
commit 736e888c683a2b630310c5fb3119fdb0466df223
Author: Tambet Ingo <tambet@gmail.com>
Date: Fri Mar 7 10:44:36 2008 -0600
Rework ppp-manager to set up dbus service instead of doing it in pppd plugin.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3388 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Will Stephenson <wstephenson@kde.org>
* Makefile.am
configure.in
- Set up spec autogeneration infrastructure
* docs/NetworkManager DBUS API.txt
- Note how old this doc is and where to look for the canonical
D-Bus specification
* introspection/*
- Add annotations and comments
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3345 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Global rename of NMConnectionSettings -> NMExportedConnection to cut down
on confusing names
* Add 'path' and 'scope' properties to NMConnection since both NM and the
applet were having to hack this in anyway. Remove the 'path' stuff from
NMExportedConnection
* Internally rename NMConnectionType -> NMConnectionScope
* Provide default implementations of the 'get_id' and 'get_settings' methods
of NMExportedConnection
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3334 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Merge the beginnings of the new GSM card support.
* src/ppp-manager/nm-ppp-manager.c (nm_ppp_manager_stop): Remove
* the
ppp watch source before killing pppd - If this happens from
g_object_unref()
then the ppp manager is already destroyed by the time the watch
callback runs.
* src/nm-hal-manager.c: Add a device_type_name string to the
* device
creators, so that we can print a nice human readable string when
a
device is added.
* src/nm-umts-device.c (automatic_registration_get_network):
* Query
for the activated network, not much is done with the result
thought.
* src/nm-serial-device.c (nm_serial_device_get_reply):
* Implement.
(ppp_ip4_config): Change the device state to activated here for
now.
(real_check_connection): Make sure the connection includes ppp
setting.
* libnm-glib/nm-client.c (get_device): Handle umts devices.
* libnm-glib/Makefile.am: Add the new files to build.
* libnm-glib/nm-umts-device.c:
* libnm-glib/nm-umts-device.h: Implement.
2007-11-26 Tambet Ingo <tambet@gmail.com>
* src/nm-umts-device.c (automatic_registration_get_network): For
* now, dial
immediately, nm_serial_device_get_reply() isn't implemented
correctly yet.
* src/nm-serial-device.c (wait_for_reply_info_destroy): Don't
* try to remove
the timeout source - this function is only called when the
timeout source has
been removed.
(nm_serial_device_wait_for_reply): Allocate the duplicate
responses array
to be big enough to contain the terminating zero element as
well.
The timeout argument is meant to be in seconds now.
(real_deactivate_quickly): Implement.
* src/NetworkManager.conf: Allow root to own
"org.freedesktop.NetworkManager.PPP", deny it for everybody
else.
* libnm-util/nm-setting-umts.c: Network type and band properties
* are ints,
(not unsigned ints).
* libnm-util/nm-setting-serial.c (nm_setting_serial_class_init):
* Fix a
small issue with parity bounds - capital letters have lower
ascii codes
than lower case letters.
* libnm-util/nm-connection.c (register_default_settings):
* Register serial
and umts settings.
2007-11-22 Tambet Ingo <tambet@gmail.com>
Remove the "index" property from devices as not all device types
have this.
* include/NetworkManager.h (NM_DBUS_PATH_DEVICE): Remove.
* src/nm-hal-manager.c (nm_get_device_index_from_hal): Remove.
(wired_device_creator): Get the device interface from hal to
create the device.
(wireless_device_creator): Ditto.
* src/nm-device.c (nm_device_init): Remove the index member.
(constructor): Remove the checks for index property, make
interface property
a require constructor property.
Use the HAL udi for DBus path for devices.
(nm_device_get_index): Remove.
(set_property): Remove index handling.
(get_property): Ditto.
(nm_device_get_dbus_path): Remove.
* src/nm-device-interface.c (nm_device_interface_init): Remove
* the index
property.
* src/nm-device-802-3-ethernet.c
* (nm_device_802_3_ethernet_link_activated):
Access the device index through it's interface.
(nm_device_802_3_ethernet_link_deactivated): Ditto.
(nm_device_802_3_ethernet_new): Remove the useless argument
test_dev. Remove
index argument. Add interface argument.
* src/nm-device-802-11-wireless.c
* (nm_device_802_11_wireless_new): Remove
the useless test_dev argument. Remove index argument. Add
interface arugment.
* src/NetworkManagerSystem.c
* (nm_system_device_set_from_ip4_config): Get the
device index through interface.
(nm_system_set_mtu): Ditto.
* introspection/nm-device.xml: Remove the "Index" property.
2007-11-21 Tambet Ingo <tambet@gmail.com>
* src/nm-serial-device.c:
* src/nm-serial-device.c:
* src/nm-umts-device.c:
* src/nm-umts-device.h: Implement.
* src/nm-hal-manager.c (nm_get_device_driver_name):
* libhal_free_string the string
allocated by libhal.
(modem_device_creator): Implement.
(register_built_in_creators): Register the modem creator.
* src/nm-device-802-11-wireless.c
* (nm_device_802_11_wireless_new):
Remove the unused test_dev argument.
* src/nm-device-802-3-ethernet.c (nm_device_802_3_ethernet_new):
* Ditto.
* src/Makefile.am: Add new files to build.
Link in ppp-manager.
* libnm-util/nm-setting-umts.c:
* libnm-util/nm-setting-umts.h:
* libnm-util/nm-setting-serial.c:
* libnm-util/nm-setting-serial.h: Implement.
* libnm-util/Makefile.am: Add new files to build.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3116 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Helmut Schaa <hschaa@suse.de> (and more bits from me)
* src/NetworkManagerAP.c
src/NetworkManagerAP.h
libnm-glib/nm-access-point.c
libnm-glib/nm-access-point.h
- Make 'rate' property a guint32 to better match with WEXT and
wpa_supplicant and to allow representation of higher bitrates
* src/nm-device-802-11-wireless.c
introspection/nm-device-802-11-wireless.xml
libnm-glib/nm-device-802-11-wireless.c
libnm-glib/nm-device-802-11-wireless.h
- Make 'bitrate' property a guint32 to match AP 'rate' property type
* src/nm-device-802-3-ethernet.c
src/nm-device-802-3-ethernet.h
introspection/nm-device-802-3-ethernet.xml
libnm-glib/nm-device-802-3-ethernet.c
libnm-glib/nm-device-802-3-ethernet.h
- Make 'speed' property a guint32 to match other speed/rate types
- Make nm_device_802_3_ethernet_get_speed() static
* test/nm-tool.c
- Update for the changes above
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3030 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Split the GetSecrets() call off to a separate D-Bus interface so that it
can be more easily locked down with D-Bus policy. Only 'root' (ie, NM)
should be able to call GetSecrets().
* include/NetworkManager.h
- Define the connection secrets D-Bus interface
* src/vpn-manager/nm-vpn-connection.c
- (clear_need_auth): get the right proxy object for the connection
secrets interface
- (get_connection_secrets): use the connection secrets proxy; send
empty hints in get secrets request
* src/nm-activation-request.c
- (nm_act_request_request_connection_secrets): use the connection
secrets proxy; send empty hints in get secrets request
* src/nm-manager.c
src/nm-manager.h
- (connection_get_settings_cb): set the connection secrets proxy on
the connection object too
- (internal_new_connection_cb): create the connection secrets proxy
* introspection/nm-settings-connection.xml
- Define Connection.Secrets interface and move GetSecrets there
- Add a 'hints' argument to GetSecrets
* libnm-glib/nm-settings.c
libnm-glib/nm-settings.h
- (impl_connection_settings_get_secrets): add 'hints' argument
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2989 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Implement killswitch polling through HAL.
* src/nm-manager.c: Add wireless hardware status property. Add
'properties-changed' signal for changes in wireless and wireless
hardware
state changes.
* src/nm-hal-manager.c: Poll hal for killswitch statuses in
* every 6 seconds
and update NMManager's wireless hardware state when it has
changed.
(nm_hal_manager_new): Don't try to add initial devices here -
(hal_init)
already does that.
* libnm-glib/nm-client.c: Add wireless hardware status property.
* Cache the
values of wireless state and wireless hardware state. Listen for
the
'properties-changed' signals, update the cached values and emit
notify.
* include/NetworkManager.h: Fix a typo in a comment.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2975 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* introspection/nm-device-802-11-wireless.xml
src/nm-device-802-11-wireless.h
src/nm-device-802-11-wireless.c
- Add a PropertiesChanged signal for wireless device
- Store currently associated access point
- (periodic_update): generalize; update rate here too and emit the
correct PropertiesChanged signal when stuff changes
- (real_deactivate_quickly, nm_device_802_11_wireless_dispose,
real_activation_cancel_handler): clear current_ap when device is
deactivated
- (link_to_specific_ap, get_ap_blacklisted,
nm_device_802_11_wireless_get_best_ap): remove obsolete and unused
code
- (nm_device_802_11_wireless_get_bitrate): make static; unused anywhere
outside this file
- (real_set_hw_address): emit property changed signal if the card's
MAC address changes
- (real_act_stage1_prepare): set the initial current_ap to the AP
the card is supposed to be connecting to
- (activation_success_handler): send out property updates on successful
activation
- (get_property): pull bitrate from cached value; use OBJECT_PATH type
for ACTIVE_ACCESS_POINT property because sometimes there won't be
one and dbus-glib doesn't like marshalling NULL G_TYPE_OBJECTs
- (nm_device_802_11_wireless_class_init): ACTIVE_ACCESS_POINT property
is now boxed; add PropertiesChanged signal
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2934 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Add a GetActiveConnections() method on the Manager object.
* src/nm-manager.c
src/nm-manager.h
introspection/nm-manager.xml
- (connection_get_settings_cb): keep connection type around too
- (impl_manager_get_active_connections, add_one_connection_element):
implement; returns all active connections and what devices they
apply to
* libnm-glib/nm-client.c
libnm-glib/nm-client.h
introspection/nm-manager-client.xml
- (nm_client_get_devices): GPtrArray elements are allocated and owned
by the caller; free here to avoid memory leak
- (nm_client_get_active_connections): implement; return the list of
active connections
- (nm_client_free_active_connection_element): implement; free an element
of the GSList returned by nm_client_get_active_connections()
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2927 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* include/NetworkManagerVPN.h
- define VPN connection state change reason codes
* src/vpn-manager/Makefile.am
src/vpn-manager/nm-vpn-marshal.list
src/vpn-manager/nm-vpn-marshal-main.c
- Add marshallers for StateChanged signal
* introspection/nm-vpn-connection.xml
- New Banner property
- StateChanged signal now includes a 'reason' argument
* src/vpn-manager/nm-vpn-connection.c
src/vpn-manager/nm-vpn-connection.h
- Add a "Banner" property that contains the returned VPN server login
banner (if any); valid only in the ACTIVATED state
- (nm_vpn_connection_set_state, nm_vpn_connection_disconnect): now takes
a 'reason' argument and emits that reason along with the
state-changed signal
- Fix up calls to nm_vpn_connection_set_state() to include a reason
- (nm_vpn_connection_ip4_config_get): save banner for later
- (nm_vpn_connection_get_banner, get_property,
nm_vpn_connection_class_init): implement Banner property
* src/vpn-manager/nm-vpn-service.c
- (nm_vpn_service_connections_stop): take a reason argument; copy the
connection list because elements may get added/removed from it
while iterating over the list
- (connection_state_changed): signal now includes the 'reason' argument
* libnm-glib/nm-vpn-connection.c
libnm-glib/nm-vpn-connection.h
- (nm_vpn_connection_get_banner): new function
- (state_changed_proxy): handle reason argument
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2916 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-manager.c:
* src/nm-manager.h:
Implement device activation through NMManager.
Implement "pending device activation" here - If the connection
isn't found,
we try to wait for up to 5 seconds for the connection to be
provided.
Add NMConnectionType argument to "connection-added" and
"connection-removed"
signals.
(nm_manager_get): Remove. Finally.
* src/nm-activation-request.c:
* src/nm-activation-request.h:
Remove all the deferred activation code.
* src/nm-device.c: Remove all the deferred activation code. Once
* the device
activation is started, it's started. Update the activation
virtual function
signature.
* src/nm-device-interface.c:
* src/nm-device-interface.h:
Device activation now takes only NMActRequest argument.
Don't expose device activation directly on dbus, it's supposed
to go through
NMManager now.
* src/NetworkManagerPolicy.c (nm_policy_device_change_check):
* Make the code
a bit more compact.
Use the new device activation methods through NMManager.
* introspection/nm-manager-client.xml:
* introspection/nm-manager.xml:
* libnm-glib/nm-client.c:
* libnm-glib/nm-client.h:
Add device activation method.
* libnm-glib/nm-device.c:
* libnm-glib/nm-device.h:
* introspection/nm-device.xml:
Remove device activation method. It's done through NMManager
now.
* src/vpn-manager/nm-vpn-manager.c (impl_vpn_manager_connect):
* Use the shiny
new (nm_manager_get_device_by_path) function, get rid of our own
)find_device).
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2915 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* introspection/nm-vpn-plugin.xml
libnm-glib/nm-vpn-plugin.c
libnm-glib/nm-vpn-plugin.h
- (impl_vpn_plugin_need_secrets): implement a call that should return
the name of the NMSetting in an NMConnection that may require
secrets specific to that VPN plugin
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2892 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-glib/nm-vpn-plugin.c (nm_vpn_plugin_connect): Update the
* plugin activation
method.
(impl_vpn_plugin_connect): Convert properties hash to
NMConnection, activate, and
unreference the connection.
* introspection/nm-vpn-plugin.xml: Modify the 'Connect' method
* arguments: instead of
passing properties hash and routes string list, pass
NMConnection (in hashed form).
* src/vpn-manager/nm-vpn-connection.c
* (nm_vpn_connection_get_routes): Return routes
as GSList, no need to copy stuff around anymore.
(nm_vpn_connection_activate): Update the plugin activation
method.
* src/NetworkManagerSystem.c
* (nm_system_vpn_device_set_from_ip4_config): Convert
routes argument to GSList.
* vpn-daemons/vpnc/src/nm-vpnc-service.c (real_connect):
The arguments have changed, update.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2890 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Properly re-query secrets from the settings daemon when stuff fails.
* src/nm-device-802-11-wireless.c
- (ap_auth_enforced): handle static WEP correctly here by differentiating
between Shared Key and Open System auth modes
- (link_timeout_cb, supplicant_connection_timeout_cb,
real_act_stage4_ip_config_timeout): clear existing secrets and
request new ones when something fails due to a suspected wrong key
- (real_act_stage2_config): fix for new request_new argument to
nm_manager_get_connection_secrets()
* src/nm-manager.c
src/nm-manager.h
- (nm_manager_get_connection_secrets): return error status; pass
new request_new argument on to the settings daemon
* introspection/nm-settings-connection.xml
- New 'request_new' argument to the GetSecrets call that hints to the
settings daemon to ask the user for completely new secrets
* libnm-glib/nm-settings.c
libnm-glib/nm-settings.h
- (impl_connection_settings_get_secrets): handle new 'request_new'
argument
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2872 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* introspection/nm-settings-connection.xml
libnm-glib/nm-settings.c
libnm-glib/nm-settings.h
- Make GetSecrets asynchronous on the server side
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2829 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerAP.c
src/NetworkManagerAP.h
introspection/nm-access-point.xml
- Change strength-changed signal into a properties-changed signal
for all properties, not just strength. Export that signal over dbus
so listeners don't have to poll NM for changes.
- (nm_ap_export_to_dbus, nm_ap_new): not every NMAccessPoint should
get exported over D-Bus, so break up the logic and let other bits
decided when to export the AP
- (nm_ap_new_from_ap): remove, unused
* src/nm-device-802-11-wireless.c
- (merge_scanned_ap): only export APs that are actually on the device
list, not every AP created internally
* libnm-glib/nm-access-point.c
libnm-glib/nm-access-point.h
- Cache properties internally and only hit DBus when needed. Get
property updates from NM signals
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2825 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/vpn-manager/nm-vpn-connection.[ch]:
* src/vpn-manager/nm-vpn-manager.[ch]:
* src/vpn-manager/nm-vpn-service.[ch]: Rewrite the vpn handling
* code. Using
dbus-glib, GObjects, signals etc.
* libnm-glib/nm-vpn-manager.[ch]:
* libnm-glib/nm-vpn-connection.[ch]: Now that the NM
* implementation changed
so much, rewrite these too.
* libnm-glib/Makefile.am: Add new files to build, build new
* binding files for
the new introspection files.
* libnm-glib/nm-client.[ch]: Remove all VPN related stuff from
* here.
* libnm-glib/nm-dbus-utils.[ch]: Renamed from nm-utils.[ch] that
* was shadowing
the header with the same name from libnm-utils.
* libnm-glib/nm-vpn-plugin.[ch]: Implement.
* libnm-util/Makefile.am: Add nm-utils.[ch] to build.
* introspection/nm-vpn-plugin.xml: Implement.
* introspection/nm-vpn-connection.xml: Implement.
* introspection/nm-vpn-manager.xml: Implement.
* src/NetworkManagerSystem.c
* (nm_system_vpn_device_set_from_ip4_config): Remove
the named manager argument, it can just as easily get it as the
caller.
(nm_system_vpn_device_unset_from_ip4_config): Ditto.
* src/vpn-manager/nm-dbus-vpn.[ch]: Remove.
* src/nm-dbus-manager.h: Fix up the name_owner signal signature.
* src/dhcp-manager/nm-dhcp-manager.c (garray_to_string): Remove,
* use one from
libnm-utils.
* libnm-util/nm-connection.c: Ditto.
* src/NetworkManagerMain.h: Remove, it's finally empty.
* configure.in: Remove utils/ from build.
* include/NetworkManagerVPN.h: Add some more defines to reduce
* the amount
of hard-coded strings.
* utils/: Move it over to libnm-util.
* test/Makefile.am: Link against libnm-util now that util/ is
* gone.
* dispatcher-daemon/Makefile.am: Ditto.
* src/Makefile.am: Ditto.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2798 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerAP.c
src/NetworkManagerAP.h
introspection/nm-access-point.xml
- Change 'freq' property to a guint32 instead of a double since we
weren't using the floating point bits anyway
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2780 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* introspection/nm-device.xml
- The 'Activate' method now takes 3 arguments, a service name for the
settings service (user or system), the object path of the connection
to activate, and the specific object to activate, if any
* src/nm-device-interface.c
- (nm_device_interface_error_quark, nm_device_interface_error_get_type):
Add error bits
- (impl_device_activate): adapt to new Activate arguments; validate
the service name and get the Connection object from the NMManager
before starting to activate the device with the specified connection
* src/nm-device-802-3-ethernet.c
- (real_get_best_connection): find the best connection, or create a
default one if no existing connections can be used
* src/NetworkManagerPolicy.c
- (nm_policy_auto_get_best_device): Get the device's best connection
and only pick the device if it has one
- (nm_policy_device_change_check): disable wireless bits for now until
wireless get_best_connection() can be implemented (replacing "best_ap");
don't create a default connection here as the device subclass will do
that if needed
* src/nm-manager.h
src/nm-manager.c
- (nm_manager_get): make NMManager a singleton and expose the getter
internally
- Rework internal NMManager connection handling to use the same
routines for both the system and user settings services. Most calls
take a new NMConnectionType argument specifying either system or user
connections
- (nm_manager_get_connection_by_object_path): new function; get a
connection keyed on its object path
* src/NetworkManager.c
- (main): use nm_manager_get()
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2776 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Stupid mistake on my part; object path and interface for settings service
and connection objects can be the same, only the service name must be
different for the system and user settings services.
* include/NetworkManager.h
src/nm-manager.c
introspection/nm-settings-connection.xml
introspection/nm-settings.xml
libnm-glib/nm-settings.c
- (nm_connection_settings_init, query_user_connections,
new_connection_cb): Unify NetworkManagerSettings and Connection
interface name and object path
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2772 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* introspection/nm-access-point.xml
- Fix WpaFlags and RsnFlags property names to be what dbus-glib expects
them to be. There's some magic property name parsing going on in
dbus-glib that breaks up property names based on studly-caps and
puts - between words.
* libnm-glib/nm-access-point.c
- (nm_access_point_get_wpa_flags, nm_access_point_get_rsn_flags):
Fix property names
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2766 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* introspection/nm-settings-connection.xml
introspection/nm-settings.xml
- Service name -> NetworkManagerUserSettings because two services
can't share part of the same path. I'm not really sure how we'll use
the same code with the system-settings daemon...
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2744 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Remove NMAPSecurity objects, they are replaced with flags on the APs for
each AP's capabilities, and by NMConnection/NMSettings objects for user
defined connections.
* include/NetworkManager.h
- Redefine 802.11 security properties. There are now device capabilities
and AP flags and AP security flags. It was way to unclear before.
* src/Makefile.am
src/nm-ap-security-leap.h
src/nm-ap-security-leap.c
src/nm-ap-security-wpa-eap.c
src/nm-ap-security-wpa-eap.h
src/nm-ap-security-private.h
src/nm-ap-security-wpa-psk.c
src/nm-ap-security-wpa-psk.h
src/nm-ap-security-wep.c
src/nm-ap-security-wep.h
src/nm-ap-security.c
src/nm-ap-security.h
- Removed, to be replaced with NMConnection/NMSettings objects
* src/nm-dbus-nmi.c
src/nm-dbus-nmi.h
- Removed, to be replaced by code that talks to the new info daemon
interface and gets NMConnection/NMSettings objects
* src/backends/NetworkManagerSuSE.c
- Remove usage of NMAPSecurity; should be replaced by a system-level
info-daemon that does the same thing but talks the new info-daemon
D-Bus interface
* src/NetworkManagerAP.h
src/NetworkManagerAP.c
src/NetworkManagerAPList.c
libnm-glib/libnm-glib-test.c
- Remove usage of NMAPSecurity objects and adjust to new flags for
WPA/RSN
* libnm-glib/nm-access-point.c
libnm-glib/nm-access-point.h
introspection/nm-access-point.xml
test/nm-tool.c
- Adjust to new flags for AP security
* utils/nm-utils.c
utils/nm-utils.h
src/vpn-manager/nm-dbus-vpn.c
- Remove D-Bus pending call stuff from nm-utils and put it in the VPN
stuff which is the only place it's used
* src/nm-device-interface.c
src/nm-device-interface.h
introspection/nm-device.xml
src/nm-activation-request.c
src/nm-activation-request.h
src/nm-device.c
- Add a new 'specific_object' argument that hints to NM what actual
AP or other device-specific thing the connection should apply to.
NMConnection objects can apply to more than one actual device/AP.
* libnm-util/nm-connection.c
* libnm-util/nm-connection.h
- Add 'have_secrets" call stubs
* libnm-util/cipher.h
- Move NM_AUTH_TYPE_* defines here for now
* src/nm-device-802-11-wireless.c
- Remove usage of NMAPSecurity, to be replaced with NMConnection/
NMSettings objects
* src/NetworkManagerDbus.c
* src/NetworkManagerPolicy.c
- Remove usage of update_allowed_networks, should be pushing data in
a different manner
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2738 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-glib/Makefile.am: Use nm-manager-client.xml to produce
* nm-client-bindings.
* introspection/nm-manager-client.xml: Add a horrible horrbile
* hack to work around
an issue with dbus-glib bindings generator. The issue is, the
generated C caller
functions for dbus methods "Sleep(bool)" and "sleep()" both have
the same function
name and different arguments and it won't compile anymore. To
fix this, we now have
two copies of nm-manager.xml file. nm-manager.xml contains the
actual interface,
that is new API + compatibility API and used by the daemon. The
other,
nm-manager-client.xml is only the new API without compatibility
bits and is used
by libnm-glib to make it compile.
* introspection/nm-manager.xml: Define compatibility methods
* (sleep, wake, state).
* src/nm-manager.c (impl_manager_legacy_sleep)
(impl_manager_legacy_wake, impl_manager_legacy_state): Implement
the compatibility
interface functions for 0.6 branch.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2688 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
[Based on patch by Helmut Schaa <hschaa@suse.de>]
* libnm-glib/nm-client.h:
* libnm-glib/nm-object.h:
* libnm-glib/nm-vpn-connection.h:
* libnm-glib/nm-settings.h:
* libnm-glib/nm-device.h:
* libnm-glib/nm-ip4-config.h:
* libnm-glib/nm-access-point.h:
* libnm-glib/nm-device-802-3-ethernet.h:
* libnm-util/nm-setting.h:
* libnm-util/nm-connection.h: Add G_BEGIN_DECLS / G_END_DECLS to
* support C++.
* libnm-glib/nm-object.c (nm_object_get_byte_property):
* Implement.
* libnm-glib/nm-access-point.c: Strength has type char.
* gnome/vpn-properties/Makefile.am: Remove
* GNOME_DISABLE_DEPRECTATED for now
to fix build. GnomeDruid is deprecated in recent libgnomeui.
* introspection/nm-access-point.xml: Strength property is char,
* not int.
* src/NetworkManagerAP.c (set_property): Set strength from char.
(get_property): Handle hidden APs (with empty SSID).
Get strength value from char.
(nm_ap_class_init): Strength property has char type.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2659 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Robert Buchholz <rbu@gentoo.org>:
* configure.in:
* Makefile.am:
* introspection/Makefile.am:
Make make distcheck work again.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2628 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-glib/Makefile.am: Link with libnm-util to gain access to
NMConnection.
* libnm-glib/nm-device-802-11-wireless.c:
(nm_device_802_3_ethernet_activate): Remove.
* libnm-glib/nm-device-802-3-ethernet.c
(nm_device_802_3_ethernet_activate): Remove.
* libnm-glib/nm-device.c (nm_device_activate): Implement.
* src/nm-device-802-3-ethernet.c: Implement the new activation using
NMConnection.
* src/nm-device-802-11-wireless.c: Store an activation AP once the
activation has started.
Implement the new activation using NMConnection.
* src/nm-activation-request.c: Store a generic connection object instead
of a wireless-specific AP.
* src/NetworkManagerPolicy.c (create_connection): Implement. Depending
on device type, create a device specific connection object suitable for
device activation.
* src/nm-device.c (nm_device_activate): Re-implement. Call the device
specific check to validate the connection and on success start the
activation.
* src/nm-device-interface.h: Add a activate virtual function to the
interface definition.
* src/nm-device-interface.c (nm_device_interface_activate): Implement.
(impl_device_activate): Implement.
* introspection/nm-device.xml: Add a generic device activation interface
that accepts an abstract NMConnection structure that has device-specific
information in it.
* introspection/nm-device-802-3-ethernet.xml: Remove the wired-specific
activation interface.
* introspection/nm-device-802-11-wireless.xml: Remove the wireless-specific
activation interface.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2569 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-glib/nm-device-802-11-wireless.c
(nm_device_802_11_wireless_get_capabilities): Implement.
* libnm-glib/nm-device.c (nm_device_get_capabilities): Implement.
* src/nm-device-802-11-wireless.c: Add "WirelessCapabilities" property.
* src/named-manager/nm-named-manager.c (remove_one_zone_from_named): Unref the
reply only if it's not NULL. Not sure why this started happening right now.
* src/nm-manager.c (device_stop_and_free): Remove. No need to have different
code paths for when devices get removed on shutdown or when a device is just
removed.
(finalize): Don't use a g_slist_foreach() when removing devices, the list data
gets freed so any signal from a device (disconnected for instance) would invoke
NMState update which would crash.
(nm_manager_remove_device): Bring the device down when it gets removed.
* src/NetworkManagerPolicy.c (nm_policy_auto_get_best_device): Remove
the unused dev_type.
* src/nm-hal-manager.c (create_device_and_add_to_list): Don't keep the
reference to the added device, NMManager will own it (if it wants).
* test/nm-tool.c: Rewrite using libnm-glib.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2417 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/vpn-manager/nm-vpn-manager.c: Handle the DBUS state changes itself.
Handle device state changes and disconnect VPN if it's device deactivates.
* src/nm-dbus-nm.c:
* src/nm-dbus-nm.h:
* src/nm-dbus-device.c:
* src/nm-dbus-device.c:
* src/nm-dbus-net.c:
* src/nm-dbus-net.h: Remove. All of it is implemented byt the new dbus API.
* src/NetworkManagerMain.h: Get rid of all but 3 properties of NMData.
* src/nm-device.c (nm_device_get_by_udi):
(nm_device_get_by_iface): Remove. This doesn't belong here and is already
implemented in the correct location (NMManager).
Rip out all the test_device stuff.
* src/NetworkManagerPolicy.c: Remove the leftover activation success and
failure handlers, it's all done by NMDevice already.
* src/NetworkManager.c: Move the signal handling here from nm-logging.c
Remove the iochannel hack to route the unix signals to the main thread since
we're not threaded anymore.
* src/NetworkManagerAP.c: Implement HWAddress property.
* src/NetworkManagerDbus.c: Remove the dbus signal sending code, it happens
automatically with dbus-glib.
* src/nm-netlink-monitor.c:
* src/nm-netlink-monitor.h:
- Move it low in the class hierarchy, don't reference any NM types.
- Remove private data from the header.
- Use type safe checks in public API methods.
- Make it a singleton so we don't have to pass the single reference around.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2339 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* introspection/nm-ip4-config.xml: Implement.
* libnm-glib/libnm-glib-test.c: Use new DBUS API in tests.
* libnm-glib/nm-ip4-config.c:
* libnm-glib/nm-ip4-config.c: Implement.
* src/nm-ap-security[-*]: Remove circular dependencies between APs and AP
securities. APs reference security.
* src/nm-device-802-11-wireless.c: Implement missing properties that need to
be exported over DBUS.
* src/nm-device-802-3-ethernet.c: Ditto.
* src/NetworkManagerAP.c:
* src/NetworkManagerAP.h:
- Convert to GObject, export over DBUS.
* src/nm-ip4-config.h:
* src/nm-ip4-config.h:
- Convert to GObject, export over DBUS.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2322 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Totally break NetworkManager. Please use 0.6 branch until futher notice.
* src/:
- Remove old low-level dbus interface implementations and replace them
with dbus-glib one.
* configure.in:
- Require dbus-glib >= 0.72.
- Plug in new sources to build.
* libnm-glib/:
- Implement GObject wrappers on top of DBUS glib auto-generated bindings
to make it more convenient to use from GObject based programs.
* introspection/:
- Implement DBUS XML introspection files, used by both NM and libnm-glib.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2309 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
