This patch add support to HSR/PRP interface. Please notice that PRP
driver is represented as HSR too. They are different drivers but on
kernel they are integrated together.
HSR/PRP is a network protocol standard for Ethernet that provides
seamless failover against failure of any network component. It intends
to be transparent to the application. These protocols are useful for
applications that request high availability and short switchover time
e.g electrical substation or high power inverters.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1791
Parse the access point announced bandwidth in MHz. This is considering
both HT and VHT. Please notice that for VHT 80+80 MHz we are representing it
as 160 MHz.
We want to guard against concurrent modifications of profiles. We cannot
lock profiles, so what we instead do is expose (and bump) a version ID.
The user can check the version ID, plan ahead what to do, and tell
NetworkManager to only make the modification if no concurrent
modification was done. The conflict can be detected via the version ID.
The Update2() D-Bus call gets a parameter to only allow the request if
the version ID still matches.
nmcli should use this, but it is quite some effort to retry upon
concurrent modification. This is still to do.
Note that the user might make a decision that is based on multiple
profiles. As the new version-id is only per-profile, we cannot guard
against such inter-profile modifications. What would be needed, is a
UpdateMany() call, where we could modify multiple profiles at once, and
the action only takes effect if all version IDs show no concurrent
modification. That's not done yet, and maybe never will be.
Reapply() is supposed to make sure that the system (the interface)
is configured as indicated by the applied-connection. That means,
it will remove/add configuration to make the system match the requested
configuration.
Add a flag "preserve-external-ip" which relaxes this. During reapply,
IP addresses/routes that exist on the interface and which are not known
(or added) by NetworkManager will be left alone.
This will be used by nm-cloud-setup, so that it can reconfigure the
interface in a less destructive way, which does not conflict with
external `ip addr/route` calls.
Note that the previous commit just adds "VersionInfo" and the
possibility to expose capabilities (patch-level). This is not used
for the new reapply flag, because, while we might backport the
reapply flag, we won't backport the "VersionInfo" property. Exposing
new capabilities via the "VersionInfo" property will only become useful
in the future, where we can backport a capability to older NM versions
(but those that have "VersionInfo" too).
This exposes NM_VERSION as number (contrary to the "Version", which is a
string). That is in particular useful, because the number can be
compared with <> due to the encoding of the version.
While at it, don't make it a single number. Expose an array of numbers,
where the following numbers are a bitfield of capabilities.
Note that before commit 3c67a1ec5e ('cli: remove version check against
NM'), we used to parse the "Version" string to detect the version. As
such, the information that "VersionInfo" exposes now, was already
(somewhat) available, you just had to parse the string. The main benefit of
"VersionInfo" is that it can expose capabilities (patched behavior) in
in a lightweight bitfield. To include the numerical version there is
just useful on top.
Currently no additional capabilities are exposed. The idea is of course
to have a place in the future, where we can expose additional
capabilities. Adding a capability flag is most useful for behavior that we
backport to older branches. Otherwise, we could just check the daemon version
alone. But since we only add "VersionInfo" property only now, we cannot backport
any capability further than this, because the "VersionInfo" property itself
won't be backported. As such, this will only be useful in the future by having
a place where we can add (and backport) capabilities.
Note that there is some overlap with the existing "Capability" property
and NMCapability enum. The difference is that adding a capability via "VersionInfo"
is only one bit, and thus cheaper. Most importantly, having it cheaper means
the downsides of adding a capability flag is significantly removed. In
practice, we could live without capabilities for a long time, so they
must be very cheap for them to be worth to add. Another difference might be,
that we will want that the VersionInfo is about compile time defaults (e.g.
a certain patch/behavior that is in or not), while NM_CAPABILITY_TEAM depends on
whether the team plugin is loaded at runtime.
Support managing the loopback interface through NM as the users want to
set the proper mtu for loopback interface when forwarding the packets.
Additionally, the IP addresses, DNS, route and routing rules are also
allowed to configure for the loopback connection profiles.
https://bugzilla.redhat.com/show_bug.cgi?id=2060905
Introduce a RadioFlags property on the manager object. For now it
contains two bits WLAN_AVAILABLE, WWAN_AVAILABLE to indicate whether
any radio interface is present in the system. The presence of a radio
is detected by looking at devices and rfkill switches.
In future, any radio-related read-only boolean flag can be exposed via
this property, including the already existing WirelessHardwareEnabled
and WwanHardwareEnabled properties.
This will allow migrating a connection. If specified, the connection will
be confined to a particular settings plugin when written back. If the
plugin differs from the existing one, it will be removed from the old one.
A couple of argument documentation strings were long enough to be broken
up to span over multiple lines. gdbus-codegen, on the other hand, was
of differing opinion and promptly punished the offense by garbling the
resulting docbook.
Merge the string into single lines.
This one attempts to document an option dictionary in a manner that has
been deemed criminal by the high court of gdbus-codegen.
Beat it back into shape.
There has been a lot wrong with this one. Aside from the messy
capitalization, it broke the argument documentation into multiple lines,
baffling gdbus-codegen, which, in turn, generated garbage documentation.
Overhaul it.
There has been a lot wrong with this one. Aside from the messy
capitalization, it broke the argument documentation into multiple lines,
baffling gdbus-codegen, which, in turn, generated garbage documentation.
Overhaul it.
The property `PROP_PORTS` should be of type g_param_spec_variant() with
variant 'ao'. This way the variant can be cached.
The deprecated property 'device::slaves' in
'src/core/devices/nm-device.c' must have the same getter-implementation,
returning the same GVariant instance.
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
D-Bus 1.3.1 (2010) introduced the standard "PropertiesChanged" signal
on "org.freedesktop.DBus.Properties". NetworkManager is old, and predates
this API. From that time, it still had it's own PropertiesChanged signal
that are emitted together with the standard ones. NetworkManager
supports the standard PropertiesChanged signal since it switched to
gdbus library in version 1.2.0 (2016).
These own signals are deprecated for a long time already ([1], 2016), and
are hopefully not used by anybody anymore. libnm-glib was using them and
relied on them, but that library is gone. libnm does not use them and neither
does plasma-nm.
Hopefully no users are left that are affected by this API break.
[1] 6fb917178a
The "Ip4Address" property of "org.freedesktop.NetworkManager.Device"
interface is deprecated since version 0.9.9.1 (2013). Also, the property
is not exposed by libnm and generally not useful.
Drop the code to maintain it. The property still exists but always
returns 0 (0.0.0.0).
monitor-connection-files was deprecated and disabled by default for a long
time. In the meantime, it has no effect at all.
Remove references from the manual pages.
This property is currently most likely not used. Also, because libnm doesn't
expose it and the only known user of this API (gnome-network-displays) doesn't
use it.
In the future we may want to expand on the Groups API. E.g. exposing groups as
separate D-Bus objects, in which case a better property type would be "ao" and
not "as". For now, that is unclear nor requested.
Remove the property for now.
Add VRF support to the daemon. When the device we are activating is a
VRF or a VRF's slave, put routes in the table specified by the VRF
connection.
Also, introduce a VRF device type in libnm.
Deprecate the 'Carrier' property present in some Device sub-interfaces
in favor of the 'Carrier' flag in the InterfaceFlags property, which
is more general as it is available for all interfaces.
Add a new read-only "InterfaceFlags" property to the Device interface
to export via D-Bus kernel flags and possibly other NM specific
flags. At the moment IFF_UP and IFF_LOWERUP are implemented.
libnm has a dependency on 'libnmdbus_dep', which contains 'link_with:
libnmdbus'. This however only enforces that libnm is linked after the
libnmdbus static library is built; it doesn't give any guarantees
about the compilation phase.
We need to make libnm compilation depend on the generated header
files. The output of 'gnome.gdbus_codegen' is an array with the header
file in the second position; use it to add a proper
dependency. Unfortunately this works only with meson >= 0.46.
In the future libnm will no longer use gdbus generated code and this
dependency will not be needed anymore.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/issues/286
WiMAX is deprecated since NetworkManager 1.2.0. Note that also
NetworkManager on server side no longer supports this type, hence
the server's D-Bus API will never expose devices of this type.
Note that NMDeviceWimax and NMWimaxNsp are NMObject types. That means,
they are instantiated by NMClient to represent information on the D-Bus
interface. As NetworkManager no longer exposes WiMAX devices, such
devices are never created. Note that it makes no sense that a user would
directly instantiate NMObject types, because they only work together with
NMClient.
Don't drop the related symbols and definitions from libnm, so that there
is no API/ABI change (as far as building and linking is concerned). But
make the types defunctional (which of course is a behavioral API change).
Calling the API now triggers a g_return_*() warning.
Also belatedly mark the WimaxNsp API as deprecated. It should have been
done in 1.2. Note that here we deprecate the API and retire it at the
same time. Optimally, we would have deprecated it a few releases ago,
before retiring it. However, marking something for deprecation is anyway
no excuse for anything. I mean, removing or retiring API is usually
painful, regardless whether it was marked for deprecation or not. In this
case, there is no possibility that a libnm user gets hold on a NMDeviceWimax
or NMWimaxNsp instance, because NMClient simply no longer instantiates
them. Hence, this change should not affect any user in practice.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/merge_requests/316
Note that the server always returns TRUE for the boolean return value
of ReloadConnections. Hence, this should not change in behavior, because
the server would never have returned FALSE.
However, change behavior of the API. It's odd that the function might
return %FALSE without setting the error output. It's also not clear
what the boolean value of the "ReloadConnections" D-Bus would mean
anyway.
nm_remote_settings_load_connections() and nm_remote_settings_load_connections_async()
behave inconsistently.
It's unexpected, that a FALSE return value may leave @error unset.
Note that before commit 22e830f046 ('settings/d-bus: fix boolean
return value of "LoadConnections"'), the server boolean response
would have been bogus anyway (at least for some versions).
Unify the behavior, and ignore the boolean return value.
Some variables belong to variables in their correspondent pkg-config
file.
These variables have been renamed to `dependency_variable` to
reflect the dependency and variables from pkg-config files they are
related to.
Some of these has also been fixed to use paths relative to
installation prefix.
It should be possible to add a profile with autoconnect blocked form the
start. Update2() has a %NM_SETTINGS_UPDATE2_FLAG_BLOCK_AUTOCONNECT flag to
block autoconnect, and so we need something similar when adding a connection.
As the existing AddConnection() and AddConnectionUnsaved() API is not
extensible, add AddConnection2() that has flags and room for additional
arguments.
Then add and implement the new flag %NM_SETTINGS_ADD_CONNECTION2_FLAG_BLOCK_AUTOCONNECT
for AddConnection2().
Note that libnm's nm_client_add_connection2() API can completely replace
the existing nm_client_add_connection_async() call. In particular, it
will automatically prefer to call the D-Bus methods AddConnection() and
AddConnectionUnsaved(), in order to work with server versions older than
1.20. The purpose of this is that when upgrading the package, the
running NetworkManager might still be older than the installed libnm.
Anyway, so since nm_client_add_connection2_finish() also has a result
output, the caller needs to decide whether he cares about that result.
Hence it has an argument ignore_out_result, which allows to fallback to
the old API. One might argue that a caller who doesn't care about the
output results while still wanting to be backward compatible, should
itself choose to call nm_client_add_connection_async() or
nm_client_add_connection2(). But instead, it's more convenient if the
new function can fully replace the old one, so that the caller does not
need to switch which start/finish method to call.
https://bugzilla.redhat.com/show_bug.cgi?id=1677068
Completely rework how settings plugin handle connections and how
NMSettings tracks the list of connections.
Previously, settings plugins would return objects of (a subtype of) type
NMSettingsConnection. The NMSettingsConnection was tightly coupled with
the settings plugin. That has a lot of downsides.
Change that. When changing this basic relation how settings connections
are tracked, everything falls appart. That's why this is a huge change.
Also, since I have to largely rewrite the settings plugins, I also
added support for multiple keyfile directories, handle in-memory
connections only by keyfile plugin and (partly) use copy-on-write NMConnection
instances. I don't want to spend effort rewriting large parts while
preserving the old way, that anyway should change. E.g. while rewriting ifcfg-rh,
I don't want to let it handle in-memory connections because that's not right
long-term.
--
If the settings plugins themself create subtypes of NMSettingsConnection
instances, then a lot of knowledge about tracking connections moves
to the plugins.
Just try to follow the code what happend during nm_settings_add_connection().
Note how the logic is spread out:
- nm_settings_add_connection() calls plugin's add_connection()
- add_connection() creates a NMSettingsConnection subtype
- the plugin has to know that it's called during add-connection and
not emit NM_SETTINGS_PLUGIN_CONNECTION_ADDED signal
- NMSettings calls claim_connection() which hocks up the new
NMSettingsConnection instance and configures the instance
(like calling nm_settings_connection_added()).
This summary does not sound like a lot, but try to follow that code. The logic
is all over the place.
Instead, settings plugins should have a very simple API for adding, modifying,
deleting, loading and reloading connections. All the plugin does is to return a
NMSettingsStorage handle. The storage instance is a handle to identify a profile
in storage (e.g. a particular file). The settings plugin is free to subtype
NMSettingsStorage, but it's not necessary.
There are no more events raised, and the settings plugin implements the small
API in a straightforward manner.
NMSettings now drives all of this. Even NMSettingsConnection has now
very little concern about how it's tracked and delegates only to NMSettings.
This should make settings plugins simpler. Currently settings plugins
are so cumbersome to implement, that we avoid having them. It should not be
like that and it should be easy, beneficial and lightweight to create a new
settings plugin.
Note also how the settings plugins no longer care about duplicate UUIDs.
Duplicated UUIDs are a fact of life and NMSettings must handle them. No
need to overly concern settings plugins with that.
--
NMSettingsConnection is exposed directly on D-Bus (being a subtype of
NMDBusObject) but it was also a GObject type provided by the settings
plugin. Hence, it was not possible to migrate a profile from one plugin to
another.
However that would be useful when one profile does not support a
connection type (like ifcfg-rh not supporting VPN). Currently such
migration is not implemented except for migrating them to/from keyfile's
run directory. The problem is that migrating profiles in general is
complicated but in some cases it is important to do.
For example checkpoint rollback should recreate the profile in the right
settings plugin, not just add it to persistent storage. This is not yet
properly implemented.
--
Previously, both keyfile and ifcfg-rh plugin implemented in-memory (unsaved)
profiles, while ifupdown plugin cannot handle them. That meant duplication of code
and a ifupdown profile could not be modified or made unsaved.
This is now unified and only keyfile plugin handles in-memory profiles (bgo #744711).
Also, NMSettings is aware of such profiles and treats them specially.
In particular, NMSettings drives the migration between persistent and non-persistent
storage.
Note that a settings plugins may create truly generated, in-memory profiles.
The settings plugin is free to generate and persist the profiles in any way it
wishes. But the concept of "unsaved" profiles is now something explicitly handled
by keyfile plugin. Also, these "unsaved" keyfile profiles are persisted to file system
too, to the /run directory. This is great for two reasons: first of all, all
profiles from keyfile storage in fact have a backing file -- even the
unsaved ones. It also means you can create "unsaved" profiles in /run
and load them with `nmcli connection load`, meaning there is a file
based API for creating unsaved profiles.
The other advantage is that these profiles now survive restarting
NetworkManager. It's paramount that restarting the daemon is as
non-disruptive as possible. Persisting unsaved files to /run improves
here significantly.
--
In the past, NMSettingsConnection also implemented NMConnection interface.
That was already changed a while ago and instead users call now
nm_settings_connection_get_connection() to delegate to a
NMSimpleConnection. What however still happened was that the NMConnection
instance gets never swapped but instead the instance was modified with
nm_connection_replace_settings_from_connection(), clear-secrets, etc.
Change that and treat the NMConnection instance immutable. Instead of modifying
it, reference/clone a new instance. This changes that previously when somebody
wanted to keep a reference to an NMConnection, then the profile would be cloned.
Now, it is supposed to be safe to reference the instance directly and everybody
must ensure not to modify the instance. nmtst_connection_assert_unchanging()
should help with that.
The point is that the settings plugins may keep references to the
NMConnection instance, and so does the NMSettingsConnection. We want
to avoid cloning the instances as long as they are the same.
Likewise, the device's applied connection can now also be referenced
instead of cloning it. This is not yet done, and possibly there are
further improvements possible.
--
Also implement multiple keyfile directores /usr/lib, /etc, /run (rh #1674545,
bgo #772414).
It was always the case that multiple files could provide the same UUID
(both in case of keyfile and ifcfg-rh). For keyfile plugin, if a profile in
read-only storage in /usr/lib gets modified, then it gets actually stored in
/etc (or /run, if the profile is unsaved).
--
While at it, make /etc/network/interfaces profiles for ifupdown plugin reloadable.
--
https://bugzilla.gnome.org/show_bug.cgi?id=772414https://bugzilla.gnome.org/show_bug.cgi?id=744711https://bugzilla.redhat.com/show_bug.cgi?id=1674545