* configure.in: Generate config.h.
* configure.in: Dump dependency on OpenSSL; we can't
use it since this package is GPL:
http://www.gnome.org/~markmc/openssl-and-the-gpl.html
Instead, check for libgcrypt, use it if available,
otherwise use included MD5 code.
* src/gnome-keyring-md5.h, src/gnome-keyring-md5.c:
Suck in from gnome-keyring, munge a bit.
* src/Makefile.am (NetworkManager_SOURCES) <!WITH_GCRYPT>: Include
gnome-keyring-md5.h gnome-keyring-md5.c.
(NetworkManager_LDADD) <WITH_GCRYPT>: Add dep on LIBGCRYPT_LIBS.
* src/NetworkManagerWireless.c (nm_md5): New function, uses
libgcrypt or included gnome-keyring md5 bits.
(nm_wireless_128bit_key_from_passphrase): Use nm_md5.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@101 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/NMWirelessApplet.c
- Make current device bold
- Show more user-friendly device name if we got one from hal
* panel-applet/NMWirelessAppletDbus.c
- Grab "info.product" key from hal for network devices
- Cache the current active device
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@92 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/NMWirelessApplet.c
- Remove debugging code
- Enable device switching from menus
* panel-applet/NMWirelessAppletDbus.[ch]
- Method for asking NM to switch devices
* src/NetworkManagerDevice.c
- Set dev->activating earlier, avoids race between
the dbus signal of "DeviceActivating" and setting
dev->activating (which is what NM's "status" method call
looks at)
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@83 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/NMWirelessApplet.[ch]
- Rework menu code to add devices to menu, and to show
signal strength for each access point. Code cleanups
too.
* panel-applet/NMWirelessAppletDbus.c
- Grab network devices from NetworkManager too
- Grab quality information from NM for wireless networks
* src/NetworkManagerDbus.[ch]
- Add dbus methods for getting the HAL UDI from a device and
for getting its base quality, if its wireless
- Consolidate some functions (wireless network notifications,
device notifications)
- Add method for requesting NM to use a particular device
* src/NetworkManager.c
- Change for function consolidations from NetworkManagerDbus.c
- Implement active device locking and user-requested devices
(ie, tell NM to use a particular device instead of the one
it autochose)
* src/NetworkManagerDevice.c
- Add method for getting the base quality of a device, if its
wireless
- Grab device base quailty info from iwlib during scans
* src/NetworkManagerPolicy.c
- Use a user-requested device rather than the auto-chosen device
if we are told to
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@81 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
(nmwa_menu_item_activate), (nmwa_toplevel_menu_activate),
(nmwa_add_menu_item), (nmwa_menu_item_data_free),
(nmwa_dispose_menu_items), (nmwa_populate_menu),
(nmwa_setup_widgets), (do_not_eat_button_press), (nmwa_new):
* panel-applet/NMWirelessApplet.h:
Use a menu bar instead of a button for the main clickable
thingy.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@79 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerDevice.c
- (nm_device_set_enc_key): always set device to "open" mode instead of
turning encryption off, because the Cisco driver doesn't associate
with WEP-enabled access points unless we are in "open"
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@78 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/NMWirelessApplet.c
- (nmwa_udpate_state): Set panel icon to "wired" (for lack of better ones)
when NM isn't around or when its not connected
* src/NetworkManagerDevice.c
- (nm_device_activation_worker): Make sure to reset dev->activating if we get
canceled.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@73 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/NMWirelessAppletDbus.c
- (nmwa_dbus_get_bool, nmwa_dbus_get_network_encrypted): correct method name
for getting encryption, and don't stop on "val" once we've gotten it
from NetworkManager. Short form: encryption should now show up.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@72 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/NMWirelessApplet.c
- Set ESSID on a gconf trusted network too when force-setting the wireless
network to associate with
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@71 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerAP.[ch]
- Add a "enc_method_good" member and accessors to an Access Point
to signal when we've found the correct encryption method
for an access point
- Add a "timestamp" member and accessors, remove "priority" member
and accessors (use timestamps instead)
- Rename "wep_key"->"enc_key"
- (nm_ap_get_enc_key_hashed): new, return the correct mangled key
for a specified encryption method using the access points
source encryption key/passphrase
* src/NetworkManagerAPList.c
- When updating a network with dbus, grab timestamp now instead of
priority
* src/NetworkManagerDBus.[ch]
- Add signal for "DeviceActivating"
- Switch priority->timestamp
* src/NetworkManagerDevice.c
- Change references of "wep_key" -> "enc_key" or "key"
- Signal DeviceActivating when starting activation
- When activating a wireless device, if the access point we are connecting
to is encrypted, and we have a source key, try to generate a mangled
key and use that (ie, generate real WEP key from a passphrase)
- Rework device activation to fallback to other encryption methods if
a previous one didn't work (ie, try mangling a key as a 104-bit passphrase
first, then if that doesn't work fall back to direct hex key).
- (nm_device_update_best_ap): fix a deadlock, and use timestamps instead of
priority. We now prefer the latest access point used, rather than using
a priority scheme
- (nm_device_do_normal_scan): make the encryption method "unknown" on access
points we've just discovered, and merge in correct info from the global
access point lists
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@68 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManager.c
src/backends/NetworkManagerGentoo.c
src/backends/NetworkManagerRedHat.c
src/backends/NetworkManagerSystem.h
- Implement preliminary Gentoo support, adding a
nm_system_init function to the backend specification
* configure.in
- Distribution auto-detection, lowercase any user-fed
distribution names
* initscript/.cvsignore
initscript/Makefile.am
initscript/RedHat/Makefile.am
initscript/RedHat/NetworkManager
initscript/Gentoo/Makefile.am
initscript/Gentoo/NetworkManager
- Refactored initscript code separately for each
distribution
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@64 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* configure.in
src/Makefile.am
src/NetworkManagerDevice.c
src/NetworkManager.c
src/NetworkManagerUtils.[ch]
src/backends/NetworkManagerSystem.h
src/backends/NetworkManagerRedHat.c
src/backends/NetworkManagerGentoo.c
- Refactor system-specific code into separate backends for
each distribution
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@62 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/NMWirelessApplet.c
- Update our state every second to get more responsive panel icon
- (nmwa_update_state): remove bogus applet->pix_state = PIX_WIRED that
was causing our marching ants status blips to never move when
looking for a wireless network
* src/NetworkManagerDevice.c
- (nm_device_activation_begin): return if activation has already begun
- (nm_device_do_normal_scan): merge WEP key and priority from the
trusted/preferred network into the device's access point when the
scan list is processed
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@60 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* initscript/NetworkManager
- Use NMLaunchHelper rather than sleeping
* initscript/NMLaunchHelper.c
Makefile.am
- Add helper program that exits only when NM activates a device,
or 10 seconds have passed, whichever happens first. This
stops the boot processes until we have a network connection,
which NM can't do because it daemonizes and brings the connection
up in the background. Allows stuff like NFS to not die.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@59 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* info-daemon/NetworkManagerInfoPassphraseDialog.c
- (nmi_passphrase_dialog_ok_clicked): when updating the wep key
for a network, set the essid as well since it may not exist yet
- (nmi_passphrase_dialog_init): don't star out the passphrase field,
since WEP keys/passphrases are long and prone to entry-error
* panel-applet/Makefile.am
panel-applet/wired.png
- Add (pulled from system-config-network temporarily)
* panel-applet/NMWirelessApplet.[ch]
- Show wired picture when a wired connection is used
- Rename wireless icon enums, adding WIRELESS
* src/NetworkManagerDevice.c
- (nm_device_activate_wireless): unset encryption before bringing
down the card and setting the essid
- (nm_device_activatin_worker): request a key from the user if the
AP we are connecting to is encrypted but we don't have a key
for it yet
- (nm_device_set_user_key_for_network): fix missing '== 0' for a
strcmp() that prevented a user-entered key from actually getting
used
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@58 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* initscript/NetworkManager
- Check for /sbin/ip
- Do sysctl magic that network service does
- sleep 4s after start to allow network time to come up [hack]
* src/Makefile.am
src/NMLoadModules
- Load all network device kernel modules (hal doesn't know devices
are ethernet until the module is loaded, and therefore we don't know)
* src/NetworkManager.c
- (main): daemonize later, launch NMLoadModules to alert HAL of our
network devices, and bring up the loopback device explicitly
* src/NetworkManagerUtils.[ch]
- (nm_enable_loopback): new function
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@55 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
