No need to have two test-runners. Combine them, and call tests always
via "tools/run-nm-test.sh".
Yes, this brings an overhead, that we now always invoke the test with
a test wrapper script, also --without-vagrind. Previously, that was only
necessary for libnm tests that require their own D-Bus session.
Later we will do non-recursive Makefiles, thus all tests should have the
same LOG_COMPILER.
We should enable tests by default, probably we even should drop
the configure flags to enable tests and just always build them.
Anyway, at this point there is no use in guarding check-local
with a check for ENABLE_TESTS. A user who does't want to run
the tests, should just not call `make check`.
- don't include "nm-default.h" in header files. Every source file must
include as first header "nm-default.h", thus our headers get the
default include already implicitly.
- we don't support compiling NetworkManager itself with a C++ compiler. Remove
G_BEGIN_DECLS/G_END_DECLS from internal headers. We do however support
users of libnm to use C++, thus they stay in public headers.
(cherry picked from commit f19aff8909)
This adds two new options to the configure scripts to compile NM,
clients and libraries with the address and undefined-behavior
sanitizers available in recent GCC versions. Clang is not supported at
moment.
Add new Reload D-Bus command to reload NetworkManager configuration.
For now, this is like sending SIGHUP to the process. There are several
advantages here:
- it is guarded via PolicyKit authentication while signals
can only be sent by root.
- the user can wait for the reload to be complete instead of sending
an asynchronous signal. For now, we operation completes after
nm_config_reload() returns, but later we could delay the response
further until specific parts are fully reloaded.
- SIGHUP reloads everything including re-reading configuration from
disk while SIGUSR1 reloads just certain parts such as writing out DNS
configuration anew.
Now, the Reload command has a flags argument which is more granular
in selecting parts which are to be reloaded. For example, via
signals the user can:
1) send SIGUSR1: this writes out the DNS configuration to
resolv.conf and possibly reloads other parts without
re-reading configuration and without restarting the DNS plugin.
2) send SIGHUP: this reloads configuration from disk,
writes out resolv.conf and restarts the DNS plugin.
There is no way, to only restart the DNS plugin without also reloading
everything else.
For internal compilation we want to be able to use deprecated
API without warnings.
Define the version min/max macros to effectively disable deprecation
warnings.
However, don't do it via CFLAGS option in the makefiles, instead hack it
to "nm-default.h". After all, *every* source file that is for internal
compilation needs to include this header as first.
GError codes are only unique per domain, so logging the code without
also indicating the domain is not helpful. And anyway, if the error
messages are not distinctive enough to tell the whole story then we
should fix the error messages.
Based-on-patch-by: Dan Winship <danw@gnome.org>
Use g_error_matches() where we're testing error codes. In particular,
use it rather than looking at only ->code and not also ->domain, which
is just wrong.
[thaller@redhat.com: rebase and modify original patch]
Functions that take a GError** MUST fill it in on error. There is no
need to check whether error is NULL if the function it was passed to
had a failing return value.
Likewise, a proper GError must have a non-NULL message, so there's no
need to double-check that either.
Based-on-patch-by: Dan Winship <danw@gnome.org>
If the plugin supports interactive mode, but the VPN binary (like vpnc
or openvpn) doesn't support it, then the plugin should return
NM_VPN_PLUGIN_ERROR_INTERACTIVE_NOT_SUPPORTED from its connect_interactive()
hook. This lets NetworkManager know to fall back to plain Connect().
Since this notification is done through an error return, the VPN service
plugin code sees the failure and moves the plugin state back to
STOPPED. NetworkManager sees that state change, and terminates the
connection attempt while waiting for a reply to the Connect() method.
(VPN service plugins that don't support interactive mode at all don't
have this problem because that error is returned before the plugin's
state is moved to STARTING.)
To fix this, do two things:
1) if the connect_interactive() hook fails and returns the error
NM_VPN_PLUGIN_ERROR_INTERACTIVE_NOT_SUPPORTED, postpone the STOPPED
state change for a few seconds to allow NM time to fall back to
plain Connect(). We still want to move the plugin state back to
STOPPED eventually, because otherwise it could stay in STARTING
forever.
2) change state to STARTING only if the connect/connect_interactive
plugin hooks were successful. Otherwise the plugin would still be
in STARTING state, and it's not valid to call Connect()/ConnectInteractive()
during the STARTING state.
https://mail.gnome.org/archives/networkmanager-list/2016-February/msg00091.htmlhttps://bugzilla.redhat.com/show_bug.cgi?id=1298732
- All internal source files (except "examples", which are not internal)
should include "config.h" first. As also all internal source
files should include "nm-default.h", let "config.h" be included
by "nm-default.h" and include "nm-default.h" as first in every
source file.
We already wanted to include "nm-default.h" before other headers
because it might contains some fixes (like "nm-glib.h" compatibility)
that is required first.
- After including "nm-default.h", we optinally allow for including the
corresponding header file for the source file at hand. The idea
is to ensure that each header file is self contained.
- Don't include "config.h" or "nm-default.h" in any header file
(except "nm-sd-adapt.h"). Public headers anyway must not include
these headers, and internal headers are never included after
"nm-default.h", as of the first previous point.
- Include all internal headers with quotes instead of angle brackets.
In practice it doesn't matter, because in our public headers we must
include other headers with angle brackets. As we use our public
headers also to compile our interal source files, effectively the
result must be the same. Still do it for consistency.
- Except for <config.h> itself. Include it with angle brackets as suggested by
https://www.gnu.org/software/autoconf/manual/autoconf.html#Configuration-Headers
- "gsystem-local-alloc.h" and <gio/gio.h> are already included via
"nm-default.h". No need to include them separately.
- include "nm-macros-internal.h" via "nm-default.h" and drop all
explict includes.
- in the modified files, ensure that we always include "config.h"
and "nm-default.h" first. As second, include the header file
for the current source file (if applicable). Then follow external
includes and finally internal nm includes.
- include nm headers inside source code files with quotes
- internal header files don't need to include default headers.
They can savely assume that "nm-default.h" is already included
and with it glib, nm-glib.h, nm-macros-internal.h, etc.
Add test showing how libnm/libnm-glib handles invalid connections,
i.e. connections that fail nm_connection_verify(). libnm implements
settings a static types (via different NMSetting types). This makes
it unavoidable that eventually a newer server version will
expose connections that fail verification in the client.
For example, master added a new base type NMSettingTun. This setting type
was not backported to legacy libnm-glib, thus such connection will not verify.
Also, we want that newer server versions are backward compatible with older
library versions. Thus also a pre-NMSettingTun libnm version has the same
problem.
The test shows that libnm is agnostic to whether the connection verifies.
That is consistent behavior, but possibly problematic because most
accessors to connections assert against a valid connection. Thus using
the common nm_connection*() functions on an invalid connection can lead
to problems.
Also, due to the static nature of our NMSetting types, some properties
can be silently dropped and thus mangling the connection without the
library user noticing.
libnm-glib prints a g_warning() whenever parsing an invalid connection.
When an invalid connection is added initially, it is exposed to the library
user. When a connection gets later invalidated due to an update, the
connection disappears and it stays missing even if a subsequent update
makes the connection valid again.
libnm-glib's behavior indicates that we might wanted to hide invalid
connections from the user. But it's very broken there.
Up to now, the "include" directory contained (only) header files that were
used project-wide by libs, core, clients, et al.
Since the directory now also contains a non-header file, the "include"
name is misleading. Instead of adding yet another directory that is
project-wide, with non-header-only content, rename the "include"
directory to "shared".
The unit tests for libnm and libnm-glib use a NetworkManager stub
service written in Python (test-networkmanager-service.py). As they
share the same server, it makes sense to also share the same utility
code to drive the stub.
Move the common code to include/.
Note that contrary to "nm-test-utils.h", "nm-test-libnm-utils.h" is not
a header-only file. Instead its implementation is in "nm-test-utils-impl.c".
The reason for that this split is, if we later have yet another non-header-only
test-utility, then all the implementations are in "nm-test-utils-impl.c", requiring
the tests to link only one object file.
After commit 8ca6e412c1, libnm-glib is
able to instantiate unknown devices as dummy objects without creating
a D-Bus proxy for them. Enable this behavior for every new unknown
device type.
This is a straightforward copy of the changes done in libnm. It is done to cope
with test failures due to redundant or misordered signals. See
commit 52ae28f6e5 for a detailed explanation.
