At other places, we already use __BYTE_ORDER define to detect endianness.
We don't need multiple mechanisms.
Also note that meson did not do the correct thing as AC_C_BIGENDIAN,
so meson + nss + big-endian was possibly broken.
- Don't use @parent_class name. This local variable (and @object_class) is
the class instance up-cast to the pointer types of the parents. The point
here is not that it is the direct parent. The point is, that it's the
NMSettingClass type.
Also, it can only be used inconsistently, in face of NMSettingIP4Config,
who's parent type is NMSettingIPConfig. Clearly, inside
nm-setting-ip4-config.c we wouldn't want to use the "parent_class"
name. Consistently rename @parent_class to @setting_class.
- Also rename the pointer to the own class to @klass. "setting_class" is also the
wrong name for that, because the right name would be something like
"setting_6lowpan_class".
However, "klass" is preferred over the latter, because we commonly create new
GObject implementations by copying an existing one. Generic names like "klass"
and "self" inside a type implementation make that simpler.
- drop useless comments like
/* virtual functions */
/* Properties */
It's better to logically and visually structure the code, and avoid trival
remarks about that. They only end up being used inconsistently. If you
even need a stronger visual separator, then an 80 char /****/ line
should be preferred.
1) the command line gets shorter. I frequently run `make V=1` to see
the command line arguments for the compiler, and there is a lot
of noise.
2) define each of these variables at one place. This makes it easy
to verify that for all compilation units, a particular
define has the same value. Previously that was not obvious or
even not the case (see commit e5d1a71396
and commit d63cf1ef2f).
The point is to avoid redundancy.
3) not all compilation units need all defines. In fact, most modules
would only need a few of these defines. We aimed to pass the necessary
minium of defines to each compilation unit, but that was non-obvious
to get right and often we set a define that wasn't used. See for example
"src_settings_plugins_ibft_cppflags" which needlessly had "-DSYSCONFDIR".
This question is now entirely avoided by just defining all variables in
a header. We don't care to find the minimum, because every component
gets anyway all defines from the header.
4) this also avoids the situation, where a module that previously did
not use a particular define gets modified to require it. Previously,
that would have required to identify the missing define, and add
it to the CFLAGS of the complation unit. Since every compilation
now includes "config-extra.h", all defines are available everywhere.
5) the fact that each define is now available in all compilation units
could be perceived as a downside. But it isn't, because these defines
should have a unique name and one specific value. Defining the same
name with different values, or refer to the same value by different
names is a bug, not a desirable feature. Since these defines should
be unique accross the entire tree, there is no problem in providing
them to every compilation unit.
6) the reason why we generate "config-extra.h" this way, instead of using
AC_DEFINE() in configure.ac, is due to the particular handling of
autoconf for directory variables. See [1].
With meson, it would be trivial to put them into "config.h.meson".
While that is not easy with autoconf, the "config-extra.h" workaround
seems still preferable to me.
[1] https://www.gnu.org/software/autoconf/manual/autoconf-2.63/html_node/Installation-Directory-Variables.html
We commonly don't use the glib typedefs for char/short/int/long,
but their C types directly.
$ git grep '\<g\(char\|short\|int\|long\|float\|double\)\>' | wc -l
587
$ git grep '\<\(char\|short\|int\|long\|float\|double\)\>' | wc -l
21114
One could argue that using the glib typedefs is preferable in
public API (of our glib based libnm library) or where it clearly
is related to glib, like during
g_object_set (obj, PROPERTY, (gint) value, NULL);
However, that argument does not seem strong, because in practice we don't
follow that argument today, and seldomly use the glib typedefs.
Also, the style guide for this would be hard to formalize, because
"using them where clearly related to a glib" is a very loose suggestion.
Also note that glib typedefs will always just be typedefs of the
underlying C types. There is no danger of glib changing the meaning
of these typedefs (because that would be a major API break of glib).
A simple style guide is instead: don't use these typedefs.
No manual actions, I only ran the bash script:
FILES=($(git ls-files '*.[hc]'))
sed -i \
-e 's/\<g\(char\|short\|int\|long\|float\|double\)\>\( [^ ]\)/\1\2/g' \
-e 's/\<g\(char\|short\|int\|long\|float\|double\)\> /\1 /g' \
-e 's/\<g\(char\|short\|int\|long\|float\|double\)\>/\1/g' \
"${FILES[@]}"
The files in shared/nm-utils are not compiled as one static library,
instead each subproject that needs (parts of) them, re-compiles the
files individually.
The major reason for that is, because we might have different compile
flags, depending on whether we build libnm-core or
libnm-util/libnm-glib. Actually, I think that is not really the case,
and maybe this should be refactored, to indeed build them all as a
static library first.
Anyway, libnm-util, libnm-glib, clients' common lib, they all need a
different set of shared files that they should compile. Refactor
"shared/meson.build" to account for that and handle it like autotools
does.
Another change is, that "shared_c_siphash_dep" no longer advertises
"include_directories: include_directories('c-siphash/src')". We don't
put c-siphash.h into the include search path. Users who need it, should
include it via "#include <c-siphash/src/c-siphash.h>". The only exception
is when building shared_n_acd library, which is not under our control.
Use two common defines NM_BUILD_SRCDIR and NM_BUILD_BUILDDIR
for specifying the location of srcdir and builddir.
Note that this is only relevant for tests, as they expect
a certain layout of the directories, to find files that concern
them.
libnm-util/crypto_gnutls.c: In function crypto_encrypt:
libnm-util/crypto_gnutls.c:245:8: error: variable salt_len set but not used [-Werror=unused-but-set-variable]
gsize salt_len;
^~~~~~~~
See-also: 312c72f761
Coccinelle:
@@
expression a, b;
@@
-a ? a : b
+a ?: b
Applied with:
spatch --sp-file ternary.cocci --in-place --smpl-spacing --dir .
With some manual adjustments on spots that Cocci didn't catch for
reasons unknown.
Thanks to the marvelous effort of the GNU compiler developer we can now
spare a couple of bits that could be used for more important things,
like this commit message. Standards commitees yet have to catch up.
There are multiple tests with the same in different directories; add a
unique prefix to test names so that it is clear from the output which
one is running.
The code was passing the gpointer alias of the GValue, rather than the
GValue* itself. This doesn’t matter normally, but broke an experimental
patch in GLib to remove a cast from G_VALUE_TYPE.
We’ve reverted the patch in GLib (see
https://bugzilla.gnome.org/show_bug.cgi?id=793186), but this should be
fixed in NetworkManager anyway.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=793302
We commonly only allow tabs at the beginning of a line, not
afterwards. The reason for this style is so that the code
looks formated right with tabstop=4 and tabstop=8.
NM_API_VERSION is a better name. It's not the current stable
version, but the version number of the API which the current
NM_VERSION provides. In practice, NM_API_VERSION is either identical
to NM_VERSION (in case of a release) or NM_VERSION is a development
version leading up the the upcoming NM_API_VERSION.
For example, with the new name the check
#if NM_VERSION != NM_API_VERSION
# warning this is an development version
#endif
makes more sense.
We don't need to have two version defines "CUR" and "NEXT".
The main purpose of these macros (if not their only), is to
make NM_AVAILABLE_IN_* and NM_DEPRECATED_IN_* macros work.
1) At the precise commit of a release, "CUR" and "NEXT" must be identical,
because whenever the user configures NM_VERSION_MIN_REQUIRED and
NM_VERSION_MAX_ALLOWED, then they both compare against the current
version, at which point "CUR" == "NEXT".
2) Every other commit aside the release, is a development version that leads
up the the next coming release. But as far as versioning is concerned, such
a development version should be treated like that future release. It's unstable
API and it may or may not be close to later API of the release. But
we shall treat it as that version. Hence, also in this case, we want to
set both "NM_VERSION_CUR_STABLE" and again NEXT to the future version.
This makes NM_VERSION_NEXT_STABLE redundant.
Previously, the separation between current and next version would for
example allow that NM_VERSION_CUR_STABLE is the previously release
stable API, and NM_VERSION_NEXT_STABLE is the version of the next upcoming
stable API. So, we could allow "examples" to make use of development
API, but other(?) internal code still restrict to unstable API. But it's
unclear which other code would want to avoid current development.
Also, the points 1) and 2) were badly understood. Note that for our
previousy releases, we usually didn't bump the macros at the stable
release (and if we did, we didn't set them to be the same). While using
two macros might be more powerful, it is hard to grok and easy to
forget to bump the macros a the right time. One macro shall suffice.
All this also means, that *immediately* after making a new release, we shall
bump the version number in `configure.ac` and "NM_VERSION_CUR_STABLE".
We also unconditionally use them with autotools.
Also, the detection for have_version_script does
not seem correct to me. At least, it didn't work
with clang.
The strings holding the names used for libraries have also been
moved to different variables. This way they would be less error
as these variables can be reused easily and any typing error
would be quickly detected.
Some targets are missing dependencies on some generated sources in
the meson port. These makes the build to fail due to missing source
files on a highly parallelized build.
These dependencies have been resolved by taking advantage of meson's
internal dependencies which can be used to pass source files,
include directories, libraries and compiler flags.
One of such internal dependencies called `core_dep` was already in
use. However, in order to avoid any confusion with another new
internal dependency called `nm_core_dep`, which is used to include
directories and source files from the `libnm-core` directory, the
`core_dep` dependency has been renamed to `nm_dep`.
These changes have allowed minimizing the build details which are
inherited by using those dependencies. The parallelized build has
also been improved.
These files are a template how to add a new nm-setting-* implementation.
We are not going to add new files to the deprecated libnm-util library,
hence a template for libnm-util is pointless.
libnm-core doesn't have a corresponding template file. Personally, I
don't think such a template are a great idea either, because
- People are not aware that it exists. Hence, it's unused, badly
maintained and quite possibly does not follow current best practice.
- Just copy an actual settings implementation and start from there.
That seems better to me than having a template.
Tests are commonly created via copy&paste. Hence, it's
better to express a certain concept explicitly via a function
or macro. This way, the implementation of the concept can be
adjusted at one place, without requiring to change all the callers.
Also, the macro is shorter, and brevity is better for tests
so it's easier to understand what the test does. Without being
bothered by noise from the redundant information.
Also, the macro knows better which message to expect. For example,
messages inside "src" are prepended by nm-logging.c with a level
and a timestamp. The expect macro is aware of that and tests for it
#define NMTST_EXPECT_NM_ERROR(msg) NMTST_EXPECT_NM (G_LOG_LEVEL_MESSAGE, "*<error> [*] "msg)
This again allows the caller to ignore this prefix, but still assert
more strictly.
Note that:
- we compile some source files multiple times. Most notably those
under "shared/".
- we include a default header "shared/nm-default.h" in every source
file. This header is supposed to setup a common environment by defining
and including parts that are commonly used. As we always include the
same header, the header must behave differently depending
one whether the compilation is for libnm-core, NetworkManager or
libnm-glib. E.g. it must include <glib/gi18n.h> or <glib/gi18n-lib.h>
depending on whether we compile a library or an application.
For that, the source files need the NETWORKMANAGER_COMPILATION #define
to behave accordingly.
Extend the define to be composed of flags. These flags are all named
NM_NETWORKMANAGER_COMPILATION_WITH_*, they indicate which part of the
build are available. E.g. when building libnm-core.la itself, then
WITH_LIBNM_CORE, WITH_LIBNM_CORE_INTERNAL, and WITH_LIBNM_CORE_PRIVATE
are available. When building NetworkManager, WITH_LIBNM_CORE_PRIVATE
is not available but the internal parts are still accessible. When
building nmcli, only WITH_LIBNM_CORE (the public part) is available.
This granularily controls the build.
Source files for enum types are generated by passing segments of the
source code of the files to the `glib-mkenums` command.
This patch removes those parameters where source code is used from
meson build files by moving those segmeents to template files.
https://mail.gnome.org/archives/networkmanager-list/2017-December/msg00057.html
There are some tests located in different directories which are
using the same name. To avoid any confussion a prefix was used to
name the test and the target.
This patch uses the prefix just for the target, to avoid any
collision that may happen, and uses the `test-` pattern as the
name.
https://mail.gnome.org/archives/networkmanager-list/2017-December/msg00051.html
The `libnm_linking` test that belongs to the libnm-util's general
tests is failing because the test is not able to find the
`test-libnm-linking` binary, which is executed as a child process.
The problem lies to the `BUILD_DIR` macro definition which is
used to set the place to find the binary, and is wrongly defined
with the source directory.
This patch changes its value to the build directory that fixes
the problem.
https://mail.gnome.org/archives/networkmanager-list/2017-December/msg00049.html
30. NetworkManager-1.9.2/src/settings/plugins/keyfile/nms-keyfile-writer.c:218:
check_return: Calling "g_mkdir_with_parents" without checking return
value (as is done elsewhere 4 out of 5
times).
25. NetworkManager-1.9.2/src/platform/nm-linux-platform.c:3969:
check_return: Calling "_nl_send_nlmsg" without checking return value (as
is done elsewhere 4 out of 5 times).
34. NetworkManager-1.9.2/src/nm-core-utils.c:2843:
negative_returns: "fd2" is passed to a parameter that cannot be negative.
26. NetworkManager-1.9.2/src/devices/wwan/nm-modem-broadband.c:897:
check_return: Calling "nm_utils_parse_inaddr_bin" without checking
return value (as is done elsewhere 4 out of 5 times).
3. NetworkManager-1.9.2/src/devices/bluetooth/nm-bluez5-manager.c:386:
check_return: Calling "g_variant_lookup" without checking return value
(as is done elsewhere 79 out of 83 times).
16. NetworkManager-1.9.2/libnm-util/nm-setting.c:405:
check_return: Calling "nm_g_object_set_property" without checking return
value (as is done elsewhere 4 out of 5 times).
rpmdiff complains about uses of inet_aton, inet_makeaddr, inet_netof,
inet_ntoa under the IPv6 section:
usr/sbin/NetworkManager on aarch64 i686 x86_64 ppc ppc64 ppc64le s390 s390x uses function inet_aton, which may impact IPv6 support
I think the warning is bogus, but refactor our code to avoid it.
Note that systemd code still uses them, so it don't avoid the rpmdiff
warning. But let's not diverge our systemd import from upstream for this.
- for NMSettingBond:validate_ip() also avoid g_strsplit_set() which
allocates a full strv. Instead, we can do with one g_strdup().
- for test-resolvconf-capture.c, replace the functions with macros.
Macros should be avoided usually, but for test asserts they are
more convenient as they preserved the __FILE__:__LINE__ of where
the assertion fails.
There are very few places where we actually use floating point
or #include <math.h>.
Drop that library, although we very likely still get it as indirect
dependency (e.g. on my system it is still dragged in by libsystemd.so,
libudev.so and libnl-3.so).
In practice, this should only matter when there are multiple
header files with the same name. That is something we try
to avoid already, by giving headers a distinct name.
When building NetworkManager itself, we clearly want to use
double-quotes for including our own headers.
But we also want to do that in our public headers. For example:
./a.c
#include <stdio.h>
#include <nm-1.h>
void main() {
printf ("INCLUDED %s/nm-2.h\n", SYMB);
}
./1/nm-1.h
#include <nm-2.h>
./1/nm-2.h
#define SYMB "1"
./2/nm-2.h
#define SYMB "2"
$ cc -I./2 -I./1 ./a.c
$ ./a.out
INCLUDED 2/nm-2.h
Exceptions to this are
- headers in "shared/nm-utils" that include <NetworkManager.h>. These
headers are copied into projects and hence used like headers owned by
those projects.
- examples/C
priv->path_cost and priv->priority can only be set as GObject properties,
which already does the same range check. Hence, the checks are never reached.
This also avoids a compiler warning:
libnm-core/nm-setting-bridge-port.c: In function ‘verify’:
libnm-core/nm-setting-bridge-port.c:132:22: error: comparison is always false due to limited range of data type [-Werror=type-limits]
if (priv->path_cost > BR_MAX_PATH_COST) {
^
The -Wimplicit-fallthrough=3 warning is quite flexible of accepting
a fall-through warning.
Some comments were missing or not detected correctly.
Thereby, also change all other comments to follow the exact
same pattern.
