1) the command line gets shorter. I frequently run `make V=1` to see
the command line arguments for the compiler, and there is a lot
of noise.
2) define each of these variables at one place. This makes it easy
to verify that for all compilation units, a particular
define has the same value. Previously that was not obvious or
even not the case (see commit e5d1a71396
and commit d63cf1ef2f).
The point is to avoid redundancy.
3) not all compilation units need all defines. In fact, most modules
would only need a few of these defines. We aimed to pass the necessary
minium of defines to each compilation unit, but that was non-obvious
to get right and often we set a define that wasn't used. See for example
"src_settings_plugins_ibft_cppflags" which needlessly had "-DSYSCONFDIR".
This question is now entirely avoided by just defining all variables in
a header. We don't care to find the minimum, because every component
gets anyway all defines from the header.
4) this also avoids the situation, where a module that previously did
not use a particular define gets modified to require it. Previously,
that would have required to identify the missing define, and add
it to the CFLAGS of the complation unit. Since every compilation
now includes "config-extra.h", all defines are available everywhere.
5) the fact that each define is now available in all compilation units
could be perceived as a downside. But it isn't, because these defines
should have a unique name and one specific value. Defining the same
name with different values, or refer to the same value by different
names is a bug, not a desirable feature. Since these defines should
be unique accross the entire tree, there is no problem in providing
them to every compilation unit.
6) the reason why we generate "config-extra.h" this way, instead of using
AC_DEFINE() in configure.ac, is due to the particular handling of
autoconf for directory variables. See [1].
With meson, it would be trivial to put them into "config.h.meson".
While that is not easy with autoconf, the "config-extra.h" workaround
seems still preferable to me.
[1] https://www.gnu.org/software/autoconf/manual/autoconf-2.63/html_node/Installation-Directory-Variables.html
We commonly don't use the glib typedefs for char/short/int/long,
but their C types directly.
$ git grep '\<g\(char\|short\|int\|long\|float\|double\)\>' | wc -l
587
$ git grep '\<\(char\|short\|int\|long\|float\|double\)\>' | wc -l
21114
One could argue that using the glib typedefs is preferable in
public API (of our glib based libnm library) or where it clearly
is related to glib, like during
g_object_set (obj, PROPERTY, (gint) value, NULL);
However, that argument does not seem strong, because in practice we don't
follow that argument today, and seldomly use the glib typedefs.
Also, the style guide for this would be hard to formalize, because
"using them where clearly related to a glib" is a very loose suggestion.
Also note that glib typedefs will always just be typedefs of the
underlying C types. There is no danger of glib changing the meaning
of these typedefs (because that would be a major API break of glib).
A simple style guide is instead: don't use these typedefs.
No manual actions, I only ran the bash script:
FILES=($(git ls-files '*.[hc]'))
sed -i \
-e 's/\<g\(char\|short\|int\|long\|float\|double\)\>\( [^ ]\)/\1\2/g' \
-e 's/\<g\(char\|short\|int\|long\|float\|double\)\> /\1 /g' \
-e 's/\<g\(char\|short\|int\|long\|float\|double\)\>/\1/g' \
"${FILES[@]}"
Previously, the action was only passed as the first command line
argument to the dispatcher scripts. Now, also set it via the
"$NM_DISPATCHER_ACTION" environment variable.
The main purpose is to have a particular, nm-dispatcher specific
variable that is always set inside the dispatcher scripts.
For example, imagine you have a script that can be either called by
dispatcher or some other means (manually, or spawned via
/etc/NetworkManager/dispatcher.d/11-dhclient). Then it might make
sense to differenciate from inside the script whether you are called
by nm-dispatcher. But previously, there was no specific environment
variable that was always set inside the dispatcher event. For example,
with the "hostname" action there are no other environment variables.
Now (with version 1.12), you can check for `test -n "$NM_DISPATCHER_ACTION"`.
(cherry picked from commit ce9619047c)
Use two common defines NM_BUILD_SRCDIR and NM_BUILD_BUILDDIR
for specifying the location of srcdir and builddir.
Note that this is only relevant for tests, as they expect
a certain layout of the directories, to find files that concern
them.
- don't use GSList as intermediate data type to construct
the environment, especially when all we want is to get
a strv array at the end. This reverts the order of elements
compared to previously.
- add and use helper methods _items_add_*() which assert against sensible
input.
- merge IPv4 and IPv6 implementations for creating the environment.
https://github.com/NetworkManager/NetworkManager/pull/112
Coccinelle:
@@
expression a, b;
@@
-a ? a : b
+a ?: b
Applied with:
spatch --sp-file ternary.cocci --in-place --smpl-spacing --dir .
With some manual adjustments on spots that Cocci didn't catch for
reasons unknown.
Thanks to the marvelous effort of the GNU compiler developer we can now
spare a couple of bits that could be used for more important things,
like this commit message. Standards commitees yet have to catch up.
There are multiple tests with the same in different directories; add a
unique prefix to test names so that it is clear from the output which
one is running.
We commonly only allow tabs at the beginning of a line, not
afterwards. The reason for this style is so that the code
looks formated right with tabstop=4 and tabstop=8.
We also unconditionally use them with autotools.
Also, the detection for have_version_script does
not seem correct to me. At least, it didn't work
with clang.
Some targets are missing dependencies on some generated sources in
the meson port. These makes the build to fail due to missing source
files on a highly parallelized build.
These dependencies have been resolved by taking advantage of meson's
internal dependencies which can be used to pass source files,
include directories, libraries and compiler flags.
One of such internal dependencies called `core_dep` was already in
use. However, in order to avoid any confusion with another new
internal dependency called `nm_core_dep`, which is used to include
directories and source files from the `libnm-core` directory, the
`core_dep` dependency has been renamed to `nm_dep`.
These changes have allowed minimizing the build details which are
inherited by using those dependencies. The parallelized build has
also been improved.
Note that:
- we compile some source files multiple times. Most notably those
under "shared/".
- we include a default header "shared/nm-default.h" in every source
file. This header is supposed to setup a common environment by defining
and including parts that are commonly used. As we always include the
same header, the header must behave differently depending
one whether the compilation is for libnm-core, NetworkManager or
libnm-glib. E.g. it must include <glib/gi18n.h> or <glib/gi18n-lib.h>
depending on whether we compile a library or an application.
For that, the source files need the NETWORKMANAGER_COMPILATION #define
to behave accordingly.
Extend the define to be composed of flags. These flags are all named
NM_NETWORKMANAGER_COMPILATION_WITH_*, they indicate which part of the
build are available. E.g. when building libnm-core.la itself, then
WITH_LIBNM_CORE, WITH_LIBNM_CORE_INTERNAL, and WITH_LIBNM_CORE_PRIVATE
are available. When building NetworkManager, WITH_LIBNM_CORE_PRIVATE
is not available but the internal parts are still accessible. When
building nmcli, only WITH_LIBNM_CORE (the public part) is available.
This granularily controls the build.
Source files for enum types are generated by passing segments of the
source code of the files to the `glib-mkenums` command.
This patch removes those parameters where source code is used from
meson build files by moving those segmeents to template files.
https://mail.gnome.org/archives/networkmanager-list/2017-December/msg00057.html
Originally, the "callouts" directory contained various programs
that NetworkManager would call, for example the dhcp helper.
For a while, it only contains nm-dispatcher. Thus rename the directory
to indicate that it's for dispatcher.
