These properties limit whether the connection applies to a certain WWAN modem
based on the modem's device ID or SIM ID (as reported by the WWAN management
service), or through the MCC/MNC ID of the operator that issued the SIM card.
Old init-scripts that did not yet understand this key will have
mac-address-randomization explicitly disabled. This is to ensure
that old connections don't change behavior.
Thus, the writer must always write the value explicitly.
Downside is, if somebody creates a quick ifcfg-file, the feature
is disabled by default.
Take a missing value in keyfile/ifcfg-rh as EUI-64 to keep the compatibility
with the old conneciton. Nevertheless, the new connections should default to
the RFC7217 addresses.
It is not used externally and its use might be confusing and undesired when we
add plugin aliases. The external users should only use the name when idenfiying
the plugin and nm_vpn_plugin_info_list_find_by_service() when matchin the plugin.
In update_connection(), pickup the configuration of
the vlan interface from platform and create the proper
NMSettingVlan setting.
And during stage1, configure the flags of the device.
Also, change all the ingress/egress mappings at once
instead of having a netlink request for each mapping.
Also, ensure we *clear* all other mappings so that
only those are set, that were configured (done by
the *gress_reset_all argument).
This shall contain type definitions, with similar use
to "nm-core-internal.h".
However, it should contain a minimal set, so that we can include this
header in other headers under "src/", without including the whole
"nm-core-internal.h" in headers.
make[5]: Entering directory './NetworkManager/libnm-core/tests'
CC test-general.o
test-general.c: In function ‘test_g_hash_table_get_keys_as_array’:
test-general.c:4552:69: error: ‘length’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
test-general.c:4543:8: note: ‘length’ was declared here
guint length;
^
We changed the default value of MSettingVlan:flags from 0 to
1 (NM_VLAN_FLAG_REORDER_HEADERS). That means, that old libnm
clients will not serialize 0 (their default).
This change broke the D-Bus API. The D-Bus API allows to omit a value
when meaning the default value. That means, we cannot change the
default value (in the D-Bus API!) without breaking previous assumptions.
A newer libnm version should treat a missing flags argument as the
old default value and thus preserve the original default value (in the
D-Bus API).
This has the downside that for the future we will continue to treat a missing
value as the old default value (0), and in order to get the new default
value (1), the client must explicitly set the flags.
We also must restore the original default value in libnm-glib.
libnm-glib does not support _nm_setting_class_override_property()
and thus it must keep thinking that the default value for the GObject
property continues to be 0. Otherwise, it would not serialize a 1, which
a new libnm would now interpret as 0.
https://bugzilla.redhat.com/show_bug.cgi?id=1250225
Fixes: 687b651598
We changed the default value for the NMSettingVlan:flags from 0 to
1 (NM_VLAN_FLAG_REORDER_HEADERS). That means, we will no longer serialize
a value of 1 over D-Bus.
This breaks older libnm clients, which treat a missing flags property as
the old default (0).
-- old clients here means: clients that still use an older version of libnm
or clients that don't use libnm, but depend on the previous default value
in the D-Bus API.
Enforce to always serialize the flags properties. This workaround has almost
no downsides except that for new clients we serialize more then absolutely
necessary.
But it ensures that old clients still receive the proper value.
https://bugzilla.redhat.com/show_bug.cgi?id=1250225
Fixes: 687b651598
Add a new 'ignore' option to NMSettingWired.wake-on-lan which disables
management of wake-on-lan by NetworkManager (i.e. the pre-existing
option will not be touched). Also, change the default behavior to be
'ignore' instead of 'disabled'.
https://bugzilla.gnome.org/show_bug.cgi?id=755182
A separate instance of the support plugin is spawned for each connection with
a different bus name. The bus name is passed via --bus-name <name> argument.
Plugins that support the feature indicate it with
support-multiple-connections=true key in the [VPN Connection] section.
The bus name is currently generated by adding a .<connection.uuid> to the VPN
service name. It's guarranteed unique, but if it proves to be too long or ugly
it can easily be replaced with something more meaningful (such as the same number
as is used for connection's DBus name).
NMVpnService has been removed and folded into NMVpnConnection. A
NMVpnConnection will spawn a service plugin instance whenever it is activated
and notices the bus name it needs is not provided.
The NMVpnManager no longer needs to keep track of the connections in use apart
for compatibility purposes with plugins that don't support the feature.
This adds a LldpNeighbors property to the Device D-Bus interface
carrying information about devices discovered through LLDP. The
property is an array of hashes and each hash describes the values of
LLDP TLVs for a specific neighbor.
Add the 'lldp' property to NMSettingConnection, which specifies
whether the reception and parsing of LLDP frames to discover neighbor
devices should be enabled.
Otherwise the callers would free the address and it would result in
double-free.
Ideally, the function would return const pointer, but changing it now
would require changing also other prototypes and much code due to
snowball effect of const.
https://bugzilla.gnome.org/show_bug.cgi?id=756380
The kernel defaults REORDER_HDR to 1 when creating a new VLAN, but
NetworkManager's VLAN flags property defaulted to 0. Thus REORDER_HDR was not
set for NM-created VLANs with default values.
We want to match the kernel default, so we change the default value for the
vlan.flags property. However, we do not want to change the flags for existing
connections if the property is missing in connection files. Thus we have to
update plugins for that. We also make sure that vlan.flags is always written
by 'keyfile' when the value is default. That way new connections have flags
property explicitly written and it will be loaded as expected.
https://bugzilla.redhat.com/show_bug.cgi?id=1250225
This is intentionally IPv4 specific since this is used for a quick fallback to
method=link-local -- something that's not needed for IPv6 since the link local
address is always there.
https://bugzilla.redhat.com/show_bug.cgi?id=1262922
For libnm library, "nm-dbus-interface.h" contains defines like the D-Bus
paths of NetworkManager. It is desirable to have this header usable without
having a dependency on "glib.h", for example for a QT application. For that,
commit c0852964a8 removed that dependancy.
For libnm-glib library, the analog to "nm-dbus-interface.h" is
"NetworkManager.h", and the same applies there. Commit
159e827a72 removed that include.
However, that broke build on PackageKit [1] which expected to get the
version macros by including "NetworkManager.h". So at least for libnm-glib,
we need to preserve old behavior so that a user including
"NetworkManager.h" gets the version macros, but not "glib.h".
Extract the version macros to a new header file "nm-version-macros.h".
This header doesn't include "glib.h" and can be included from
"NetworkManager.h". This gives as previous behavior and a glib-free
include.
For libnm we still don't include "nm-version-macros.h" to "nm-dbus-interface.h".
Very few users will actually need the version macros, but not using
libnm.
Users that use libnm, should just include (libnm's) "NetworkManager.h" to
get all headers.
As a special case, a user who doesn't want to use glib/libnm, but still
needs both "nm-dbus-interface.h" and "nm-version-macros.h", can include
them both separately.
[1] https://github.com/hughsie/PackageKit/issues/85
Fixes: 4545a7fe96
This is a forward port of commit 6f616d4c4b
which added this patch on nm-1-0 branch.
However, the reason stated there is wrong because we don't need this
to fix Qt examples. Building Qt examples was fixed in that "nm-dbus-interface.h"
no longer drags in "nm-version.h".
On the other hand, we still want "nm-version.h" to be self-contained,
and include "glib.h" as it needs it.
We want "nm-dbus-interface.h" to have no dependancy on libnm and glib.
That way, it is usable for example in the QT examples without dragging
in dependencies to glib.
Also drop all the unneccessary include to "nm-dbus-interface.h", which
we already get by directly or indirectly including "nm-core-types.h".
Those getters are convenience methods to retrieve the id/type from
the NMSettingConnection. If the NMSettingConnection was missing
(and thus the connection invalid) we would raise an assertion.
Don't be so strict and just silently return NULL.
Otherwise, the caller cannot use the functions on unverified
connections.
- accept a numeric value (decimal or hex (0x prefix))
- display a numeric value of the property in addition to the strings
- add/accept spaces between string names
to behave similar to other flags' properties.
Backport to 1.0.6 the following symbols:
- nm_setting_wired_get_wake_on_lan
- nm_setting_wired_get_wake_on_lan_password
- nm_setting_wired_wake_on_lan_get_type
added to 1.0.6 with commit d449d82304
API should be added with "Since:" of the next release on the same branch.
That means, new API on 1.1 branch (development), should be "Since: 1.2"
and new API on 1.0 branch (stable) will be "Since: 1.0.x". Similarly, new
API on master is NM_AVAILABLE_IN_1_2 and will be added with the linker
version libnl_1_2 -- never the versions of minor releases.
It is also strongly advised that for the 1.0 branch, we only add API
that was previously formerly added on master. IOW, that we only do true
backports of API that already exists on master.
API that gets backported, must also be added to master via NM_BACKPORT_SYMBOL().
That gives ABI compatibility and an application that was build against 1.0.x
will work with 1.y.z version (y > 0) without need for recompiling -- provided
that 1.y.z also contains that API.
There is one important caveat: if a major branch (e.g. current master) has a
linker section of backported APIs (e.g. libnm_1_0_6), we must do the minor release
(1.0.6) before the next major release (1.2). The reason is that after the major
release, the linker section (libnm_1_0_6) must not be extended and thus
the minor release (1.0.6) must be already released at that point.
In general, users should avoid using backported API because it limits
the ability to upgrade to arbitrary later versions. But together with the
previous point (that we only backport API to minor releases), a user that
uses backported API can be sure that a 1.y.z version is ABI compatible with
1.0.x, if the 1.y.z release date was after the release date of 1.0.x.
This reverts commit 02a136682c.
VPN plugins are usually split into different packages. It might
be that the plugin file is simply not installed. We want the caller
to be able to recognize that conditation to fail gracefully.
Thus return a certain error code.
Originally, nm-applet loaded the vpn plugins by passing the filename
to g_module_open(). Thereby, g_module_open() allowed for missing file
extension and tries to complete the name with a system-dependent suffix.
When porting to libnm, we kept that behavior but did more elaborate
checks on the file, like checking owner and permissions.
Change to no longer trying to append the system suffix, but require
an exact path. That is no usability problem, because the plugin path
is specified in the .name files, and we just require them now to be the
full path (including the .so extension).
Note also, that this only affects new, libnm-based vpn plugins, thus there
is no change in behavior for legacy libnm-glib based plugins.
Fixes: eed0d0c58f
All current users of NM_IN_SET() would rather use short-circuit evalation
(or don't care). It seems that doing it by default seems favorable.
The only downside is, that this might have somewhat unexpected behavior
to a user who expects a regular function (which would evaluate always
all arguments).
Fixes: 7860ef959a
The localization headers are now included via "nm-default.h".
Also fixes several places, where we wrongly included <glib/gi18n-lib.h>
instead of <glib/gi18n.h>. For example under "clients/" directory.
When merely including "nm-vpn-plugin-info.h" (or "NetworkManager.h")
gcc raises warnings like:
"Not available before 1.2 [-Werror=deprecated-declarations]"
The problem is that the NMVpnPluginInfo typedef itself is marked as
deprecated but also used by other functions like nm_vpn_plugin_info_get_name().
typedef struct {
int field;
} Foo G_UNAVAILABLE(1,2);
G_UNAVAILABLE(1,2)
void deprecated_function (Foo *foo);
warning: ‘Foo’ is deprecated: Not available before 1.2 [-Wdeprecated-declarations]
I think that when a function is itself deprecated, gcc should not warn about
the use of a deprecated typedef.
Gcc's documentation states: "Note that the warnings only occur for
uses and then only if the type is being applied to an identifier
that itself is not being declared as deprecated.".
Apparently, this only works for structs, but not for typedef of structs.
Anyway. Remove the deprecation from NMVpnPluginInfo to avoid the compiler
warning.
https://bugzilla.gnome.org/show_bug.cgi?id=753098
Fixes: d6226bd987
Avoid a new line in the definition of enum value to fix the following
glib-mkenums warning:
glib-mkenums: nm-setting-wired.h:71:
Failed to parse ` - 1 - NM_SETTING_WIRED_WAKE_ON_LAN_DEFAULT) '
Fixes: 5622461c04
Split the content of libnm/nm-vpn-editor-plugin.h and
move NMVpnEditorPlugin to libnm-core/nm-vpn-editor-plugin.h.
VPN plugins allow us to extend functionality about VPNs.
This can be also useful for NetworkManager core, hence
move that part to libnm-core.
The name NMVpnEditorPlugin is slightly misleading but not completely
wrong. The "editor" part stands no longer for bringing nm-applet
functionality (alone), but enable general VPN functionality in
the client.
Especially because we already have NMVpnPluginOld with a different
meaning (i.e. a base class of the plugin server implementation).
NMVpnPluginInfo is little more then a wrapper around
the GKeyFile that describes the VPN plugin settings,
i.e. the name files under "/etc/NetworkManager/VPN/".
Add this class to make the VPN API more explicit. Clients
now can use NMVpnPluginInfo instead of concerning themselves
with loading the keyfile and the meaning of its properties.
Also add support for a new VPN plugins directory
"/usr/lib/NetworkManager/VPN", which should replace
"/etc/NetworkManager/VPN" in the future. But we have to
consider both locations for backward compatibility.
The content of the VPN directory is not user configuration,
hence it should not be under "/etc". See related bug 738853.
When having a hash-of-hashes where each hash is indexed by a name,
(such as GKeyFile), you can either implement it as a hash-of-hashes
or define your own version of indexes that pack both levels of names
into one key.
This is an implementation of such a key. Use it as:
GHashTable *hash = g_hash_table_new_full (_nm_utils_strstrdictkey_hash,
_nm_utils_strstrdictkey_equal,
g_free, _destroy_value);
and create keys via:
NMUtilsStrStrDictKey *k = _nm_utils_strstrdictkey_create (s1, s2);
For lookup you can use static strings (note that the static string
might increase the size of the binary):
g_hash_table_contains (hash, _nm_utils_strstrdictkey_static ("outer", "inner"))
Rather than randomly including one or more of <glib.h>,
<glib-object.h>, and <gio/gio.h> everywhere (and forgetting to include
"nm-glib-compat.h" most of the time), rename nm-glib-compat.h to
nm-glib.h, include <gio/gio.h> from there, and then change all .c
files in NM to include "nm-glib.h" rather than including the glib
headers directly.
(Public headers files still have to include the real glib headers,
since nm-glib.h isn't installed...)
Also, remove glib includes from header files that are already
including a base object header file (which must itself already include
the glib headers).
Add functions nm_utils_enum_to_str() and nm_utils_enum_from_str()
which can be used to perform conversions between enum values and
strings, passing the GType automatically generated for every enum by
glib-mkenums.
Remove an assertion in canonicalize_ip() to assert that either a
non-NULL @ip is given, or @null_any is TRUE.
The condition of the assert is not easy to understand without context.
Instead the caller should already handle %NULL properly.
All callers that pass @null_any=FALSE to canonicalize_ip(), already assert
that the argument is not %NULL. With the exception of nm_ip_route_new()
which however checks for a valid @dest early on.
We call valid_ip() from nm_ip_route_new() to check whether an untrusted string
is a valid ip address. Properly handle %NULL argument.
Fixes: 21c8a6b20e
g_convert_with_fallback() will fail if the SSID contains characters that
are not legal in the source encoding, which, if $LANG is not set, will
be ASCII. If this happens, replace all non-ASCII and non-printable
characters with '?'. It is possible that nm_utils_ssid_to_utf8() will
now return an empty string (e.g., the source string is actually
big-endian UTF-16 and g_strcanon() stops on the first byte), but it will
not return NULL.
https://bugzilla.redhat.com/show_bug.cgi?id=1243078
NetworkManager uses wpa_supplicant, which in turn calls OpenSSL for verifying
certificates. wpa_supplicant calls
SSL_CTX_load_verify_locations(ctx, CAfile, CApath)
using its ca_cert and ca_path options as CAfile and CApath parameters.
We have a configure time option with_system_ca_path to override ca_path.
However, it doesn't work when a system (like Fedora) only uses bundled PEM
certificates instead of a directory with hashed certificates ([1], [2]).
So this commit allows setting --with_system_ca_path to a file name (the
trusted certificate bundle). Then the name is used to populate wpa_supplicant's
ca_cert instead of ca_path.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1053882
[2] https://www.happyassassin.net/2015/01/12/a-note-about-ssltls-trusted-certificate-stores-and-platforms/https://bugzilla.redhat.com/show_bug.cgi?id=1236548
GKeyFile considers the order of the files, so add a possibility
to check whether to keyfiles are equal -- also with respect to
the order of the elements.
When ping is launched to check the connectivity to the gateway it may
return earlier than the given timeout in case of error. When this
happens we need to respawn it until the timeout is reached.
While at it, increase maximum timeout value to 600 seconds.
https://bugzilla.redhat.com/show_bug.cgi?id=1128581
warning: function declaration isn’t a prototype [-Wstrict-prototypes]
In C function() and function(void) are two different prototypes (as opposed to
C++).
function() accepts an arbitrary number of arguments
function(void) accepts zero arguments
AUTOCONNECT_SLAVES is an NetworkManager extension. initscripts always activate
slaves with the master connection for bond and team, and doesn't activate
automatically slaves for bridge.
NetworkManager behaviour is controlled by this variable. If the variable is
missing the default value from configuration file is used.
The property is used for controlling whether slaves should be brought up with
a master connection. If 0, activating the master will not activate slaves.
But if set to 1, activating the master will bring up slaves as well.
The property can have the third state (-1), meaning that the value is default.
That is either a value set in the configuration file for the property, or 0.
warning: function declaration isn’t a prototype [-Wstrict-prototypes]
In C function() and function(void) are two different prototypes (as opposed to
C++).
function() accepts an arbitrary number of arguments
function(void) accepts zero arguments
Add a 'metered' enum property to NMSettingConnection with possible
values: unknown,yes,no. The value indicates the presence of limitations
in the amount of traffic flowing through the connection.
Since introduction for support of ip6-privacy (use_tempaddr,
RFC4941) with commit d376270bfe,
the sysctl value from /etc was always read first.
This is problematic, because an explicit setting in the
connection should not be ignored over a global configuration.
Drop that old behavior. It was also problematic, because we did
not read any files under /etc/sysctl.d (except for sysctl.conf).
Also, we did not honor per-interface configurations.
Now we also use as last fallback the value from
/proc/sys/net/ipv6/conf/default/use_tempaddr
That has the advantage of falling back to the system default value
so that NM doesn't need to have it's own default policy
(Related: https://bugzilla.redhat.com/show_bug.cgi?id=1187525).
This is a change in behavior.
Support default value for setting 'ipv6.ip6-privacy' in
NetworkManager.conf.
If the global value is unset, preserve old behavior of looking into
/etc/sycctl.conf first. That behavior was introduced with commit
d376270bfe, since we support ip6-privacy
setting.
If the global value is set to "unknown", add a new fallback
that instead reads the runtime value from
"/proc/sys/net/ipv6/conf/default/use_tempaddr"
This seems more sensible behavior because we fallback to sysctl,
but instead of looking at static files in /etc, read /proc.
But to preserve the old behavior, we only do that when a global
value is configured at all.
https://bugzilla.gnome.org/show_bug.cgi?id=721200
Before, get_property_for_dbus() would @ignore_defaults.
That is for example wrong for properties of type G_TYPE_STRV.
In this case, if one operand has the property at its default
(NULL) and the other has it to an empty string list, both would
compare equal.
This has the effect that different settings might compare equal.
It yields completely unpredictable results on Ubuntu 12.04 (the global variable
successfully comparing to NULL despite demonstrably not NULL). Possibly a
toolchain bug.
We already have "nm-utils*.h" and "NetworkManagerUtils.h" headers. Rename
"include/nm-utils-internal.h" to "nm-macros-internal.h". I think that
name is better, because this file is header-only, internal, and
repository-wide.
Also, it will never contain non-header-only declarations because
there is no backing object file under "include/".
It will only contain macros and inline functions.
"nm-utils-private.h" should not be used outside of libnm-core/.
core/ should only use public API or "nm-core-internal.h".
Also, "nm-setting-ip-config.h" is a public header and should
not contain internal defines. Move them to "nm-core-internal.h"
too.
Fixes: 019943bb5d
For existing devices, depending on the order that netlink sends interfaces to
us, the parent may be found after the VLAN interface and not be available when
the VLAN interface is constructed. Instead of failing construction, when a
NMDeviceVlan has no parent keep it unavailable for activation. Then have
the Manager notify existing devices when a new device is found, and let
NMDeviceVlan find the parent later and become available via that mechanism.
This doesn't apply to VLANs created by NM itself, because the kernel requires
a parent ifindex when creating a VLAN device. Thus this fix only applies to
VLANs created outside NetworkManager, or existing when NM starts up.
Even Fedora is no longer shipping the WiMAX SDK, so it's likely we'll
eventually accidentally break some of the code in src/devices/wimax/
(if we haven't already). Discussion on the list showed a consensus for
dropping support for WiMAX.
So, remove the SDK checks from configure.ac, remove the WiMAX device
plugin and associated manager support, and deprecate all the APIs.
For compatibility reasons, it is still possible to create and save
WiMAX connections, to toggle the software WiMAX rfkill state, and to
change the "WIMAX" log level, although none of these have any effect,
since no NMDeviceWimax will ever be created.
nmcli was only compiling in support for most WiMAX operations when NM
as a whole was built with WiMAX support, so that code has been removed
now as well. (It is still possible to use nmcli to create and edit
WiMAX connections, but those connections will never be activatable.)
Add new capabilities CAP_FREQ_2GHZ and CAP_FREQ_5GHZ to indicate the
frequency bands supported by a Wifi device.
Add also CAP_FREQ_VALID, which is set when the values of the other 2
capabilities are available.
Original patch by Dan Williams <dcbw@redhat.com>
https://bugzilla.gnome.org/show_bug.cgi?id=723295
In theory, NM_VPN_PLUGIN_ERROR should have names under
org.freedesktop.NetworkManager.VPN.Plugin, but for historical reasons,
it's actually org.freedesktop.NetworkManager.VPN.Error.
The sort order of nm_setting_enumerate_values() affects the
order in which keyfile writer serializes the properties.
Have a defined, stable sort order by sorting the properties
by name (with prefering id,uuid,type for NMSettingConnection).
nm_connection_for_each_setting_value() is used by keyfile writer to iterate
over the settings and write the keyfile entires. The order there is important
as g_key_file_to_data() prints the groups in the order they were created.
To have a stable order and to have the [connection] entry first, sort the
settings.
libnm-core treated the UNKNOWN WEP key type as KEY. Relax that
and try to guess the correct type based on the key.
This is for example important if you have a valid connection with
wep-key-type=0 (unknown)
If you request passwords for such a connection, the user cannot
enter them in password format -- but there is no UI indication
that the password must be KEY.
We must never fail verification of a connection based on a password
because the password is re-requested during activation.
Otherwise, if the user enters an invalid password for a (previously)
valid connection, the connection becomes invalid. NetworkManager does
not expect or handle that requesting password can make a connection
invalid.
Invalid passwords should be treated as wrong passwords. Only a UI
(such as nm-connection-editor or nmcli) should validate passwords
against a certain scheme.
Note that there is need_secrets() which on the contrary must check for
valid passwords.
Error scenario:
Connect to a WEP Wi-Fi, via `nmcli device wifi connect SSID`. The
generated connection has wep-key-type=0 (UNKNOWN) and wep-key-flags=0.
When trying to connect, NM will ask for secrets and set the wep-key0
field. After that, verification can fail (e.g. if the password is longer
then 64 chars).
keyfile should become our main import/export format. It is desirable,
that a keyfile can contain every aspect of a connection.
For blob certificates, the writer in core daemon would always write
them to a file and convert the scheme to path.
This behavior is not great for a (hyptetical) `nmcli connection export`
command because it would have to export them somehow outside of keyfile,
e.g. by writing them to temporary files.
Instead, if the write handler does not handle a certificate, use a
default implementation in nm_keyfile_write() which adds the blob inside
the keyfile.
Interestingly, keyfile reader already supported reading certificate
blobs. But this legacy format accepts the blob as arbitrary
binary without marking the format and without scheme prefix.
Instead of writing the binary data directly, write it with a new
uri scheme "data:;base64," and encode it in base64.
Also go through some lengths to make sure that whatever path
keyfile plugin writes, can be read back again. That is, because
keyfile writer preferably writes relative paths without prefix.
Add nm_keyfile_detect_unqualified_path_scheme() to encapsulate
the detection of pathnames without file:// prefix and use it to
check whether the path name must be fully qualified.
These headers are not entirely private to libnm-core as they are also
used by keyfile plugin. Merge them to a new header file
nm-keyfile-internal.h so that the name makes the internal nature of the
header more apparent.
This is the first step to move keyfile to libnm. For now, only
copy the files to make later changes nicer in git-history.
/bin/cp src/settings/plugins/keyfile/reader.c libnm-core/nm-keyfile-reader.c
/bin/cp src/settings/plugins/keyfile/reader.h libnm-core/nm-keyfile-reader.h
/bin/cp src/settings/plugins/keyfile/utils.c libnm-core/nm-keyfile-utils.c
/bin/cp src/settings/plugins/keyfile/utils.h libnm-core/nm-keyfile-utils.h
/bin/cp src/settings/plugins/keyfile/writer.c libnm-core/nm-keyfile-writer.c
/bin/cp src/settings/plugins/keyfile/writer.h libnm-core/nm-keyfile-writer.h
When setting the certificate glib properties directly,
we raise a g_warning() when the binary data is invalid.
But since the caller has no access to the validation function,
he cannot easily check whether his action will result
in a warning. Add nm_setting_802_1x_check_cert_scheme() for
that.
A valid blob cannot start with "file://", otherwise it would
break the implementation of the certificate properties in
NMSetting8021x. Simply reject every blob in nm_setting_802_1x_set_ca_cert()
et al. that is not valid according to get_cert_scheme().
get_cert_scheme() would return PATH scheme for binary data that
later will be rejected by verify_cert(). Even worse, get_cert_scheme()
would not check whether the path is NUL terminated, hence the following
can crash for an invalid connection:
if (nm_setting_802_1x_get_ca_cert_scheme (s_8021x) == NM_SETTING_802_1X_CK_SCHEME_PATH)
g_print ("path: %s", nm_setting_802_1x_get_ca_cert_path (s_8021x))
Combine the two functions so that already get_cert_scheme() does
the same validation as verify_cert().
Also change behavior and be more strict about invalid paths:
- Now, the value is considered a PATH candidate if it starts with "file://",
(sans NUL character).
A change is that before, the "file://" (without NUL) would have
been treated as BLOB, now it is an invalid PATH (UNKNOWN).
- If the binary starts with "file://" it is considered as PATH but it
is only valid, if all the fllowing is true:
(a) the last character must be NUL.
(b) there is no other intermediate NUL character.
Before, an intermediate NUL character would have been accepted
and the remainder would be ignored.
(c) there is at least one non-NUL character after "file://".
(d) the string must be fully valid utf8.
The conditions (b) and (c) are new and some invalid(?) paths
might no longer validate.
Checking (d) moved from verify_cert() to get_cert_scheme().
As set_cert_prop_helper() already called verify_cert(), this
causes no additional change beyond (b).
The newly added bond mode APIs in nm-utils will be new in 1.2, so mark
them as such in the headers and docs, move them to a new section in
libnm.ver.
Since we're adding the new section to libnm.ver, this also seems like
a good time to bump the soname.
In _nm_setting_new_from_dbus(), verify that the properties have the
right types, and return an error if not. (In particular, don't crash
if someone tries to assign a GBytes-valued property a non-'ay' value.)
libnm-util's nm_setting_new_from_hash() needed to call
g_type_class_ref(setting_type) to ensure that the class had been
initialized by the time we fetched its properties. But in libnm-core's
version, we create the setting object before fetching the list of
properties, so we know the class will already have been initialized by
that point.
Use descriptive string value as preferred bond mode representation.
Numeric modes still verify but with NM_SETTING_VERIFY_NORMALIZABLE,
suggesting a normalization action.
https://bugzilla.redhat.com/show_bug.cgi?id=1171009
For IPv4 addresses, the binary representation is in network-order,
contrary to host-order. It's better to choose addresses for testing
that are differently on big and little endian systems.
In the 'configure.ac' script we already detect the git commit id
for the current source version. When creating a tarball, it is also
included inside the generated 'configure' script.
Add the commit id as a static string to nm-utils.c. That way, having
a build of libnm.so or NetworkManager, you can quickly find the
corresponding git commit:
strings src/NetworkManager | grep NM_GIT_SHA
Note that this only works after a new `autogen.sh` run. Only rebuilding
is not enough. Hence, you must rebuild all to ensure that the correct
commit id is embedded.
https://bugzilla.gnome.org/show_bug.cgi?id=741651
Error: CHECKED_RETURN (CWE-252): [#def12]
NetworkManager-0.9.11.0/libnm-core/tests/test-general.c:348: check_return: Calling "nm_setting_verify" without checking return value (as is done elsewhere 37 out of 45 times).
...
Error: RESOURCE_LEAK (CWE-772): [#def10]
NetworkManager-0.9.11.0/libnm-core/nm-setting-vlan.c:225: alloc_fn: Storage is returned from allocation function "priority_map_new_from_str".
NetworkManager-0.9.11.0/libnm-core/nm-setting-vlan.c:154:4: alloc_fn: Storage is returned from allocation function "g_malloc0".
NetworkManager-0.9.11.0/libnm-core/nm-setting-vlan.c:154:4: var_assign: Assigning: "p" = "g_malloc0(8UL)".
NetworkManager-0.9.11.0/libnm-core/nm-setting-vlan.c:164:2: return_alloc: Returning allocated memory "p".
NetworkManager-0.9.11.0/libnm-core/nm-setting-vlan.c:225: var_assign: Assigning: "item" = storage returned from "priority_map_new_from_str(map, str)".
NetworkManager-0.9.11.0/libnm-core/nm-setting-vlan.c:226: leaked_storage: Variable "item" going out of scope leaks the storage it points to.
Error: RESOURCE_LEAK (CWE-772): [#def11]
NetworkManager-0.9.11.0/libnm-core/nm-utils.c:2056: alloc_fn: Storage is returned from allocation function "crypto_make_des_aes_key".
NetworkManager-0.9.11.0/libnm-core/crypto.c:405:2: alloc_fn: Storage is returned from allocation function "g_malloc0".
NetworkManager-0.9.11.0/libnm-core/crypto.c:405:2: var_assign: Assigning: "key" = "g_malloc0(digest_len + 1U)".
NetworkManager-0.9.11.0/libnm-core/crypto.c:407:2: noescape: Resource "key" is not freed or pointed-to in function "crypto_md5_hash".
NetworkManager-0.9.11.0/libnm-core/crypto.c:769:24: noescape: "crypto_md5_hash(char const *, gssize, char const *, gssize, char *, gsize)" does not free or save its pointer parameter "buffer".
NetworkManager-0.9.11.0/libnm-core/crypto.c:415:2: return_alloc: Returning allocated memory "key".
NetworkManager-0.9.11.0/libnm-core/nm-utils.c:2056: var_assign: Assigning: "key" = storage returned from "crypto_make_des_aes_key("DES-EDE3-CBC", &salt[0], salt_len, in_password, &key_len, NULL)".
NetworkManager-0.9.11.0/libnm-core/nm-utils.c:2057: leaked_storage: Variable "key" going out of scope leaks the storage it points to.
VPN connections always return true for nm_connection_need_secrets(), but the
documented behavior of GetSecrets() is just to return any secrets we have
(otherwise nmcli c --show-secrets would not be useful for VPN connections).
Motivated by avoiding compiler warning with -O2 -Wstrict-overflow (gcc-4.8.3):
make[4]: Entering directory `./NetworkManager/libnm-core'
CC nm-utils.lo
../libnm-core/nm-utils.c: In function 'nm_utils_hwaddr_valid':
../libnm-core/nm-utils.c:2725:14: error: assuming signed overflow does not occur when simplifying conditional to constant [-Werror=strict-overflow]
if (length == 0 || length > NM_UTILS_HWADDR_LEN_MAX)
^
../libnm-core/nm-utils.c: In function 'nm_utils_hwaddr_canonical':
../libnm-core/nm-utils.c:2755:14: error: assuming signed overflow does not occur when simplifying conditional to constant [-Werror=strict-overflow]
if (length == 0 || length > NM_UTILS_HWADDR_LEN_MAX)
^
https://bugzilla.gnome.org/show_bug.cgi?id=741168
We now also use a similar function in VPN plugins. It makes
sense to provide a generic implementation in libnm.
Signed-off-by: Thomas Haller <thaller@redhat.com>
https://bugzilla.gnome.org/show_bug.cgi?id=740783
Before we would just call verify() and only return valid connections
without attempting to fix them.
It is better to use normalize(), because that function is especially there to
accept and repair deprecated configurations that would no longer verify().
This changes behavior in the way that the function now accepts connections
that would have been rejected before.
Since commit b88715e05b normalize() also
adds a missing UUID. Hence this also affects the DBUS method 'AddConnection'
in that it now accepts connections without UUID. Previously, clients were
required to set a UUID for the new connection, now NM core can create a random
one if no UUID is set.
https://bugzilla.gnome.org/show_bug.cgi?id=740813
crypto_md5_sum() already accepts two separate strings: salt and password.
No need to allocate a temporary buffer. Just pass @ns_uuid and @s
separately.
There are different types (variants) of UUIDs defined.
Especially variants 3 and 5 are name based variants (rfc4122).
The way we create our UUIDs in nm_utils_uuid_generate_from_string()
however does not create them according to RFC and does not set
the flags to indicate the variant.
Modify the signature of nm_utils_uuid_generate_from_string() to accept
a "uuid_type" argument, so that we later can add other algorithms without
breaking API.
In general, we shouldn't end up with an unencrypted copy of a
certificate key anyway, so this function ought to be unnecessary (or
at least, not broadly useful enough to be in the public API).
nm-applet's GConf migration tool needs it, but that will eventually go
away, and until then it can just use libnm-util.
crypto_md5_hash() only has two users:
(a) crypto_make_des_aes_key()
(b) nm_utils_uuid_generate_from_string()
For (b) it is just a complicated way to compute the MD5 hash. The
restrictions on salt and password don't matter. Actually they
are harmful because we cannot compute the MD5 hash of the empty
word.
For (a), the caller should make sure to pass whatever restrictions
he wants to enforce on the data.
For example, it is counterintuitive, that crypto_md5_hash() would
require @salt_len, enforce it to be at least 8 bytes, and then just
use the first 8 bytes. If the caller (a) wants that behavior, he
should make sure that he passes in 8 bytes.
Likewise for the empty word. If the caller does not want to compute
the hash of empty passwords, he must not hash them.
Indeed, all of this was enforced by assertions, any caller already
did the right thing.
Rather than requiring crypto_init() to have been called beforehand,
just have every method that depends on it call it itself.
This required adding a GError argument to crypto_is_pkcs12_data(),
which in turn required a few other changes elsewhere.
We were always using the gateway field of the first address in
ipv4.addresses / ipv6.addresses to set the gateway, but to be
compatible with old behavior, we should actually be using the first
non-0 gateway field (if the first one is 0).
NMIPRoute is used by NMSettingIPConfig, but also
NMIPConfig. In the former case, default routes are (still)
disallowed. But in the NMIPConfig use-case, it can make sense
to expose default routes as NMIPRoute instances.
Relax the restriction on the NMIPRoute API to allow this
future change.
No code actually supports having NMIPRoute instances with
prefix length zero (default routes). Up to now, all such uses
would be a bug.
https://bugzilla.gnome.org/show_bug.cgi?id=739969
Signed-off-by: Thomas Haller <thaller@redhat.com>
/libnm/crypto/PKCS#8: OK
/libnm/crypto/cert/pem: ==16241== Conditional jump or move depends on uninitialised value(s)
==16241== at 0x121967: crypto_load_and_verify_certificate (crypto.c:605)
==16241== by 0x12512E: nm_utils_file_is_certificate (nm-utils.c:2279)
==16241== by 0x1201F1: test_cert (test-crypto.c:113)
Add nm-utils methods to check if a file is a certificate or private
key file.
nm-applet currently has its own internal versions of these, but they
ended up having to duplicate a bunch of logic that we already have in
crypto.c.
Update crypto_verify_private_key() and
crypto_verify_private_key_data() to indicate whether the key was
encrypted or not.
Rename crypto_decrypt_private_key() and
crypto_decrypt_private_key_data() to
crypto_decrypt_openssl_private_key*, since that's the only private key
format they deal with, and the old names made them sound more generic
than they were. Also, update the openssl private key parsing code to
recognize unencrypted private keys as well. (Previously we accepted
unencrypted PKCS#8 keys, but not unencrypted openssl-style keys.)
