Patch from Adel Gadllah <adel.gadllah@gmail.com>
* src/nm-device-wifi.c
- (link_timeout_cb): don't ignore disconnects due to scanning
- (supplicant_iface_connection_state_cb_handler): instead, schedule
a longer timeout when scanning; avoids case where supplicant can't
find the AP and just keeps scanning forever but isn't connected
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3774 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-glib/nm-vpn-plugin-ui-interface.c
libnm-glib/nm-vpn-plugin-ui-interface.h
- 'validity-changed' -> 'changed' to work better with the connection
editor. Plugin UI widgets should emit 'changed' whenever their
UI values change in a meaningful way.
- (nm_vpn_plugin_ui_widget_interface_update_connection): the
update_connection member now returns validity of the UI widget
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3761 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* configure.in
libnm-glib/libnm_glib_vpn.pc.in
- add a .pc file for libnm_glib_vpn
* libnm-glib/nm-vpn-plugin-ui-interface.c
libnm-glib/nm-vpn-plugin-ui-interface.h
- Move the glib/GNOME VPN UI plugin interface into libnm-glib and
rework it substantially
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3755 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Add a GError argument to nm_connection_verify() and nm_setting_verify(),
and add error enums to each NMSetting subclass. Each NMSetting subclass now
returns a descriptive GError when verification fails.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3751 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerSystem.c
- (nm_system_device_set_ip4_route,
nm_system_device_replace_default_ip4_route): check for the right
return value from rtnl_route_add() to know when to add a gateway
route (from Tambet)
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3749 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Tambet Ingo <tambet@gmail.com>
* src/ppp-manager/nm-ppp-manager.c: Add ppp stats monitoring, signal the
changes.
* src/nm-serial-device.c: Monitor "ppp-stats" signals from NMPPPManager. Add
a signal to emit these changes over dbus.
* src/Makefile.am: Genereate nm-serial-device-glue.
* libnm-glib/nm-serial-device.[ch]: Implement.
* libnm-glib/nm-cdma-device.[ch]
libnm-glib/nm-gsm-device.[ch]: Inherit from NMSerialDevice.
* libnm-glib/Makefile.am: Add nm-serial-device.[ch].
* introspection/nm-device-serial.xml: Implement.
* introspection/all.xml: Fix a couple of typos, add nm-device-serial.xml.
* introspection/Makefile.am: Add nm-device-serial.xml.
* include/NetworkManager.h: Add a DBus interface for serial device.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3740 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/dnsmasq-manager/nm-dnsmasq-manager.c
src/dnsmasq-manager/nm-dnsmasq-manager.h
- (create_dm_cmd_line): use the IP4 address of the ip4-config to
calculate the addresses passed to dnsmasq instead of hard-coding
them
* src/nm-device.c
- (nm_device_new_ip4_shared_config): be somewhat dynamic when choosing
IP addresses for shared connections to guard against shared
connection address collisions
- (real_act_stage4_get_ip4_config): handle possible NULL ip4-configs on
error conditions
- (nm_device_activate_stage5_ip_config_commit): pass ip4-config to
the dnsmasq manager
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3738 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerPolicy.c
- (update_routing_and_dns): set the default connection _after_ unsetting
default on all non-default connections so that two connections can
never be default at the same time
- (device_state_changed): start and stop connection sharing when
needed
- (active_connection_default_changed): restart or stop sharing when
the default connection changes to keep shared connections always
NAT-ed through the default connection
- (check_sharing): handle activation/deactivation of shared connections
- (sharing_restart): atom-bomb approach to connection sharing until we
can use libnl; reinit all sharing when the default connection or
shared connections change
- (sharing_init, sharing_stop): evil functions that init and deinit
iptables
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3737 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device.c
- (clear_act_request): unset the 'default' property of the activation
request when clearing it to ensure the property changed signal gets
delivered and handled
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3735 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-glib/nm-device-802-11-wireless.c
- (access_point_removed_proxy): actually unref the AP after removing
it from the device's AP list. Fixes refcounting bug for APs that
caused them to get mixed up in the applet's menu.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3734 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* system-settings/src/nm-polkit-helpers.c
- (create_polkit_context): in PolicyKit 0.6, polkit_context_init() will
unref the context if the initialization fails; also avoid spew when
the error isn't set
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3731 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Fix memory leaks.
* system-settings/src/nm-system-config-hal-manager.c (get_type_for_udi):
Free data returned from dbus method call.
* system-settings/src/nm-polkit-helpers.c (check_polkit_privileges):
dbus_g_method_get_sender() returns a duplicated string, free it
when done.
(check_polkit_privileges): Looks like policykit sometimes returns
error and non-null return value, don't leak errors in that case.
* system-settings/src/main.c (find_plugin): Don't leak existing
plugin names.
(load_stuff): Don't leak device list and list items.
(have_connection_for_device): Don't leak connection list.
* system-settings/plugins/keyfile/reader.c (read_one_setting_value):
Free the data received from g_keyfile_get_*.
* system-settings/plugins/ifcfg-suse/parser.c (READ_WEP_KEY): Free
the key when the security object is updated.
* src/supplicant-manager/nm-supplicant-interface.c (scan_results_cb):
Free data returned from dbus method call.
(iface_state_cb): Ditto.
(add_network_cb): Ditto.
(nm_supplicant_interface_add_cb): Don't make another copy of already
duplicated object path.
(nm_supplicant_interface_add_to_supplicant): Free the driver GValue
when done.
* src/supplicant-manager/nm-supplicant-config.c
(ADD_STRING_LIST_VAL): Fix a memory leak.
* src/nm-manager.c (free_get_settings_info): Free the allocated
memory slice.
(list_connections_cb): Free data returned from dbus method call.
(system_settings_get_unmanaged_devices_cb): Ditto.
* src/nm-device-802-11-wireless.c (device_cleanup): Free ssid.
* system-settings/plugins/ifcfg-suse/shvar.c (svCloseFile):
* system-settings/plugins/ifcfg-fedora/shvar.c (svCloseFile):
* src/backends/shvar.c (svCloseFile): Free the duplicated content
of the GList.
* libnm-util/nm-setting.c (nm_setting_from_hash): Free the constructor
arguments after the object is created.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3721 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-util/nm-setting-ip4-config.[ch]: Add static routes property.
* src/nm-ip4-config.[ch]: Store the static routes as a list of
NMIP4Address, update the getters and setters.
* src/dhcp-manager/nm-dhcp-manager.c (nm_dhcp_manager_get_ip4_config):
Use the updated NMIP4Config routes api.
* src/NetworkManagerUtils.c (nm_utils_merge_ip4_config): Merge
static routes as well.
* src/NetworkManagerSystem.c (netmask_to_prefix): Implement.
(nm_system_device_set_from_ip4_config): Use the updated NMIP4Config
routes api.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3715 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device.c
- (dnsmasq_state_changed_cb): new function; fail the connection if
something happens to dnsmasq
- (nm_device_new_ip4_shared_config): new function; create a new
ip4-config for shared connections. Shared connections always use a
fixed static IP address.
- (real_act_stage4_get_ip4_config): handle shared connections; fix
autoip connections by actually using the returned ip4-config and
not leaking it
- (nm_device_activate_stage5_ip_config_commit): start dnsmasq for shared
connections
- (nm_device_deactivate_quickly, nm_device_dispose): terminate dnsmasq
if its active
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3711 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-util/nm-setting-ip4-config.c
libnm-util/nm-setting-ip4-config.h
- Add a 'shared' method to indicate that this connection should be
brought up with a DHCP and proxy DNS server to facilitate
connection sharing.
- (verify): 'shared' method doesn't allow DNS or searches either
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3709 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device-private.h
- Remove unused prototypes and clean up
* src/nm-device.c
- Remove anything related to system_config_data, which is no longer used
- (nm_device_new_ip4_autoip_config): make static
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3707 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* system-settings/plugins/ifcfg-suse/nm-suse-connection.c
(file_changed): Fix a bug where suse system settings plugin didn't
update the connections automatically when the files changed.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3700 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-util/nm-setting-wireless.c
libnm-util/nm-setting-wireless.h
- (set_property, get_property, nm_setting_wireless_class_init): add the
'adhoc-create' property, which when TRUE indicates that NM should
create this connection as an adhoc wifi network if it's not found
as an adhoc network during scanning. Can be used to auto-create
adhoc networks when used in combination with autoconnect.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3697 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Dennis Noordsij <dennis.noordsij@helsinki.fi>.
* src/nm-gsm-device.c: Don't try to reset the modem before PIN is
checked, it doesn't work on some devices.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3696 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/ppp-manager/nm-ppp-manager.c (nm_ppp_manager_stop): Make sure
pppd gets killed, if SIGTERM doesn't do it's job, SIGKILL it.
* src/dhcp-manager/nm-dhcp-manager.c (nm_dhcp_manager_get_ip4_config):
Use inet_aton() everywhere to improve error detection.
Don't fall back to 'dhcp_server_identifier' if the gateway is not
provided.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3695 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/supplicant-manager/nm-supplicant-settings-verify.c
- Switch 'bssid' from bytes to keyword type
- (validate_type_keyword): allow NULL keyword lists
* src/supplicant-manager/nm-supplicant-config.c
- (nm_supplicant_config_add_setting_wireless): convert the bssid from
a byte array to string form, which is what the supplicant expects
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3686 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Add a flag to NMSettingIP4Config to make it possible to ignore the DNS
information received from DHCP.
* libnm-util/nm-setting-ip4-config.c: Add a new membet "ignore_dhcp_dns"
to make it possible to ignore the DNS information (both servers and
searches) returned by DHCP server.
* src/NetworkManagerUtils.c (nm_utils_merge_ip4_config): Reset the
name servers and searches if "ignore_dhcp_dns" is set.
* src/nm-ip4-config.c (nm_ip4_config_reset_nameservers)
(nm_ip4_config_reset_searches): Implement.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3685 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Remove anything mDNS related. This is better done from a distro-specific
dispatcher script. Plus, any distro using avahi doesn't need to restart
avahi, since avahi can handle interface changes just fine using netlink.
* configure.in
- Remove --with-mdns-provider
* src/NetworkManagerPolicy.c
- (global_state_changed): don't restart the mdns provider
* src/NetworkManagerSystem.h
src/backends/NetworkManagerArch.c
src/backends/NetworkManagerDebian.c
src/backends/NetworkManagerFrugalware.c
src/backends/NetworkManagerGentoo.c
src/backends/NetworkManagerMandriva.c
src/backends/NetworkManagerPaldo.c
src/backends/NetworkManagerRedHat.c
src/backends/NetworkManagerSlackware.c
src/backends/NetworkManagerSuSE.c
- (nm_system_restart_mdns_responder): remove
* src/backends/NetworkManagerGeneric.c
src/backends/NetworkManagerGeneric.h
- (nm_generic_restart_mdns_responder): remove
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3684 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Don't remove all devices on waking up, sync with HAL.
* src/nm-manager.c (nm_manager_udi_is_managed): Implement.
(sync_devices): Implement, based on hal_manager_hal_reappeared_cb.
(hal_manager_hal_reappeared_cb): Just call sync_devices.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3680 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-gsm-device.c (device_state_changed): Make sure we don't leave the
serial device open when we're not connecting or connected.
* src/nm-cdma-device.c (device_state_changed): Ditto.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3679 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* system-settings/plugins/ifcfg-fedora/reader.c
- (make_ip4_setting): get a fallback gateway from /etc/sysconfig/network
if the ifcfg doesn't specify one
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3675 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Make the system settings service exit when the bus goes away. Since it's
a bus-activated service, it's lifetime is limited to the bus that activated
it (rh #444976).
* system-settings/src/Makefile.am
system-settings/src/nm-system-config-hal-manager-private.h
- Remove nm-system-config-hal-manager-private.h
* system-settings/src/nm-system-config-hal-manager.c
- (nm_system_config_hal_manager_reinit_dbus,
nm_system_config_hal_manager_deinit_dbus): remove
* system-settings/src/main.c
- (dbus_reconnect): remove
- (dbus_cleanup): don't tell the HAL manager to deinit dbus
- (destroy_cb): just quit when the bus goes away
- (start_dbus_service, dbus_init): simplify
- (main): destroy the wired devices hash table after destroying
the HAL manager so we don't have to disconnect signals from the
HAL manager
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3674 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Move crypto functions from nm-applet to libnm-util.
* libnm-util/nm-setting-8021x.c (nm_setting_802_1x_set_ca_cert)
(nm_setting_802_1x_set_client_cert)
(nm_setting_802_1x_set_phase2_ca_cert)
(nm_setting_802_1x_set_phase2_client_cert)
(nm_setting_802_1x_set_private_key)
(nm_setting_802_1x_set_phase2_private_key): Implement. Given a certificate
file (or private key and it's password), read the certificate data.
* libnm-util/crypto_nss.c:
* libnm-util/crypto_gnutls.c:
* libnm-util/crypto.[ch]: Move here from nm-applet.
* configure.in: Check for NSS and gnutls here (moved here from nm-applet).
* system-settings/plugins/ifcfg-suse/parser.c (read_wpa_eap_settings):
Imlement WPA-EAP configuration reading from sysconfig.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3673 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Fix Linus' bug in rh #134886
* src/nm-device-802-3-ethernet.c
- (constructor): request initial carrier state
* src/nm-netlink-monitor.c
- (nm_netlink_monitor_request_status): schedule emission of carrier
signals after refilling the link cache. Because the refill is a
synchronous operation, the normal message hander won't get called
since libnl has already consumed the messages.
- (deferred_emit_carrier_state): emit carrier states from an idle handler
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3669 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Fix refcounting issues over sleep/wake when a VPN connection was active that
caused NM to try registering an object path for a device upon wake that was
the same as an already registered object path.
* src/nm-device.c
- (nm_device_take_down): properly handle cases where the device is
no longer active but was just active, and therefore must be
deactivated. When a device moves to unmanaged mode, this function
previously would not deactivate the device, because the state was
already unmanaged by the time this function was called.
* src/vpn-manager/nm-vpn-connection.c
- (device_state_changed): properly handle multiple devices states in
which the device is now deactivated. Code previously didn't handle
transitions to the UNAVAILABLE (like rfkill or carrier off) and
UNMANAGED states.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3667 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device-private.h
src/nm-device.c
- (nm_device_hw_bring_up, nm_device_hw_take_down): export
* src/nm-device-802-11-wireless.c
- (nm_device_802_11_wireless_set_enabled): take devices up
and down as appropriate for the rfkill state
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3666 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* marshallers/nm-marshal.list
- Add VOID:POINTER,STRING marshaller for ifcfg-fedora plugin
* system-settings/plugins/ifcfg-fedora/Makefile.am
system-settings/plugins/ifcfg-fedora/nm-inotify-helper.c
system-settings/plugins/ifcfg-fedora/nm-inotify-helper.h
- Implement a minimal inotify helper for watch paths for IN_CLOSE_WRITE
events. Solely for use watching ifcfg files to pick up changes
to their hardlinks, since GIO doesn't support this yet (bgo #532815)
* system-settings/plugins/ifcfg-fedora/nm-ifcfg-connection.c
- (nm_ifcfg_connection_class_init): new 'ifcfg-changed' signal when the
file contents change
- (finalize): clean up inotify watches
- (nm_ifcfg_connection_new): store keyfile; inotify watch the keyfile
and the connection ifcfg for changes on their hardlinks
- (files_changed_cb): proxy the changed signal back out to listeners
* system-settings/plugins/ifcfg-fedora/plugin.c
- (dir_changed):
- (connection_ifcfg_changed): re-read the connection when the ifcfg
changes
- (read_one_connection): connect to change signals on the new connection
- (dir_changed, connection_changed_handler,
handle_connection_remove_or_new): break out connection change
handling and connection new/remove handling so it can be used from
both the GFileMonitor callback and the NMIfcfgConnection changed
signals
* system-settings/plugins/ifcfg-fedora/reader.c
system-settings/plugins/ifcfg-fedora/reader.h
- (connection_from_file): return the keyfile path the connection would use
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3663 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* system-settings/src/nm-polkit-helpers.c (create_polkit_context): Use a
single PolKitContext which is shared by all. PolKitContext::unref leaks
just about everything, including all open file descriptiors and results
in 99% cpu usage when data arrives to any of the fds that don't belong
to any context anymore.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3662 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* gfilemonitor/glocaldirectorymonitor.c
gfilemonitor/glocaldirectorymonitor.h
- (g_local_directory_monitor_constructor): actually subscribe to the
watch
- (_g_local_directory_monitor_new): ensure that inotify is started up
* gfilemonitor/glocalfilemonitor.c
gfilemonitor/glocalfilemonitor.h
- (g_local_file_monitor_constructor): actually subscribe to the watch
- (_g_local_file_monitor_new): ensure that inotify is started up
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3661 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* configure.in
- record PolicyKit version
* system-settings/src/nm-polkit-helpers.c
- (check_polkit_privileges): use polkit_context_can_caller_do_action()
with PolicyKit <= 0.6
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3658 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Update Fedora system-settings plugin to support latest API and use
GFileMonitor rather than home-rolled inotify code.
* system-settings/plugins/ifcfg-fedora/Makefile.am
system-settings/plugins/ifcfg-fedora/common.h
system-settings/plugins/ifcfg-fedora/plugin.c
- Update to latest system settings plugin API; use GIO instead of
custom inotify code; use NMIfcfgConnection objects instead of
ConnectionData structures tacked onto NMConnection objects
* system-settings/plugins/ifcfg-fedora/nm-ifcfg-connection.c
system-settings/plugins/ifcfg-fedora/nm-ifcfg-connection.h
- Implement an NMExportedConnection subclass mapping ifcfg files to
connections
* system-settings/plugins/ifcfg-fedora/reader.c
system-settings/plugins/ifcfg-fedora/reader.h
- Move ifcfg parsing bits here from parser.c
* system-settings/plugins/ifcfg-fedora/parser.c
system-settings/plugins/ifcfg-fedora/parser.h
- Remove; most code moved to reader.c
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3656 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* configure.in
Makefile.am
gfilemonitor/*
- Add a private copy of the GIO GFileMonitor code, with a custom GFile
implementation, so that the same change monitoring code can be used
on systems without glib-2.14 (like Fedora 8)
* system-settings/plugins/keyfile/Makefile.am
system-settings/plugins/keyfile/plugin.c
system-settings/plugins/ifcfg-suse/Makefile.am
system-settings/plugins/ifcfg-suse/plugin.c
- Use private gfilemonitor code if GIO is not present
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3654 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Use PolicyKit to authorize the system settings' AddConnection method
and the system settings connections' Update and Delete methods.
* libnm-glib/nm-settings.c (impl_exported_connection_update)
(impl_exported_connection_delete, nm_exported_connection_update)
(nm_exported_connection_delete): Return boolean and fill GError
to notify the callers of the reasons why it might have failed.
* libnm-glib/nm-dbus-settings-system.c
(nm_dbus_settings_system_add_connection): Return the error from dbus
call so that the callers can see why it failed.
* libnm-glib/nm-dbus-connection.c (update, delete): Update the
signatures.
* system-settings/src/nm-polkit-helpers.[ch]: Implement.
* system-settings/src/nm-sysconfig-connection.[ch]: Implement. New
abstract base class that checks PolicyKit permissions.
* system-settings/src/dbus-settings.c:
(impl_settings_add_connection): Check the policy before carring out
the request.
* system-settings/plugins/keyfile/nm-keyfile-connection.c:
Inherit from NMSysconfigConnection, check the policies before
allowing updating or removing.
* system-settings/plugins/ifcfg-suse/nm-suse-connection.c:
Inherit from NMSysconfigConnection.
* introspection/nm-exported-connection.xml: Annotate "Update" and
"Delete" methods with async flag so that the implementations can get
access to DBusGMethodInvocation.
* system-settings/src/dbus-settings.c
(settings_add_connection_check_privileges): Implement.
(impl_settings_add_connection): Check the privileges before adding a new
connection. Improve error reporting.
* introspection/nm-settings-system.xml: Make the 'AddConnection' method
async so that the implementation can access DBusGMethodInvocation.
* configure.in: Check for PolicyKit.
* policy/org.freedesktop.network-manager-settings.system.policy:
New file.
* policy/Makefile.am: Install the policy file.
* configure.in: Add 'policy' subdir.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3646 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* system-settings/plugins/keyfile/reader.c
- (read_one_setting_value): handle IP address items separately
- (read_array_of_uint): read IPv4 DNS option as a string array
- (read_array_of_array_of_uint): read IPv4 address tuples as a string
array
* system-settings/plugins/keyfile/writer.c
- (write_setting_value): handle IP address items separately
- (write_array_of_uint): handle IPv4 DNS option as a string array,
not an array of uint, so that it's user-editable
- (write_array_of_array_of_uint): handle IPv4 address tuples as string
arrays, so they are user-editable
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3643 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* system-settings/plugins/keyfile/Makefile.am
- Change location of the keyfile plugin settings to
/etc/NetworkManager/system-connections
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3642 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* system-settings/plugins/keyfile/nm-keyfile-connection.[ch]: Implement.
* system-settings/plugins/keyfile/plugin.c: Work with
NMKeyfileConnections.
* system-settings/src/dbus-settings.c: Remove NMSysconfigExportedConnection.
Plugins are supposed to return NMExportedConnections now and handle the
updated(), removed(), and GetSecrets().
Store the internal list of connections in hash table to make it easier
to find duplicates.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3640 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/dhcp-manager/nm-dhcp-manager.c
- (nm_dhcp_manager_get_ip4_config): clean up; update for changes to
NMIP4Config to support multiple IP addresses
* src/NetworkManagerUtils.c
- (nm_utils_merge_ip4_config): update for multiple IP addresses
* src/nm-ip4-config.c
src/nm-ip4-config.h
- Store a list of IPv4 address/netmask/gateway tuples
- (nm_ip4_config_get_gateway, nm_ip4_config_set_gateway,
nm_ip4_config_get_netmask, nm_ip4_config_set_netmask,
nm_ip4_config_get_broadcast, nm_ip4_config_set_broadcast,
nm_ip4_config_set_address): remove
- (nm_ip4_config_take_address, nm_ip4_config_add_address,
nm_ip4_config_replace_address, nm_ip4_config_get_num_addresses):
new functions; handle multiple IPv4 addresses
* src/nm-device.c
src/ppp-manager/nm-ppp-manager.c
src/vpn-manager/nm-vpn-connection.c
src/NetworkManagerPolicy.c
test/nm-tool.c
libnm-glib/libnm-glib-test.c
- update for changes to NMIP4Config for multiple IPv4 addresses
* src/NetworkManagerSystem.c
- (nm_system_device_set_ip4_route): don't add the route if any address
is on the same subnet as the destination
- (check_one_address): ignore the exact match, just match family and
interface index
- (add_ip4_addresses): add all IPv4 addresses in an NMIP4Config to
an interface
- (nm_system_device_set_from_ip4_config): use add_ip4_addresses()
- (nm_system_vpn_device_set_from_ip4_config): use add_ip4_addresses()
* introspection/nm-ip4-config.xml
- Remove 'address', 'gateway', 'netmask', and 'broadcast' properties
- Add 'addresses' property which is an array of (uuu) tuples of
address/netmask/gateway
* libnm-util/nm-setting-ip4-config.c
- (set_property): use ip-address <-> GValue converters from nm-utils.c
* libnm-glib/nm-ip4-config.c
libnm-glib/nm-ip4-config.h
- Handle D-Bus interface changes to support multiple IP addresses
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3637 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-glib/nm-dbus-settings.c (constructor): Fix the
"PropertiesChanged" signal signature.
* libnm-glib/nm-dbus-connection.c (constructor): Use the common GType
defined in nm-dbus-glib-types.h.
Don't register the connection on dbus, we're a proxy class to
communicate with an already registered connection over dbus.
2008-04-30 Tambet Ingo <tambet@gmail.com>
Implement new subclasses of NMSettings and NMExportedConnection to make
it easier for the applet to access and modify system settings.
* libnm-glib/nm-dbus-connection.[ch]:
* libnm-glib/nm-dbus-settings.[ch]:
* libnm-glib/nm-dbus-settings-system.[ch]: Implement.
* libnm-glib/Makefile.am: Add the new files to build, generate some more
bindings and glue.
* include/NetworkManager.h: Define the system settings DBus interface.
2008-04-30 Tambet Ingo <tambet@gmail.com>
Implement additional C API for exported connections to make them identical
with the DBus API. Change the (list_connections) virtual function to be
more usable from C - instead of requiring implementers to return a GPtrArray
of dbus paths, return a list of connections.
* libnm-glib/nm-settings.c (nm_exported_connection_class_init): Fix a typo.
(nm_settings_list_connections):
(nm_exported_connection_new):
(nm_exported_connection_update):
(nm_exported_connection_delete): Implement.
(impl_settings_list_connections):
(impl_exported_connection_update):
(impl_exported_connection_delete): Use the new public functions to make
sure the C and dbus interfaces stay in sync.
* system-settings/src/dbus-settings.c (list_connections): Return a list of
connections.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3630 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-serial-device.c
- (find_terminator): don't compare the whole line, just the size of the
terminator, since some modems put stuff after the terminator, like
"CONNECT 9600"
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3628 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Michael Biebl <biebl@debian.org>
* callouts/Makefile.am
callouts/org.freedesktop.nm_dispatcher.service.in
system-settings/src/Makefile.am
system-settings/src/org.freedesktop.NetworkManagerSystemSettings.service.in
- use the right install location for dbus-activated stuff
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3624 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Handle HAL dropouts better; allow NM to start up even if HAL isn't up yet.
* marshallers/nm-marshal.list
- Add marshaller
* src/NetworkManager.c
- (main): let the NMManager handle the NMHalManager
* src/nm-hal-manager.c
src/nm-hal-manager.h
- convert to a GObject, and emit singals when stuff changes. Let the
NMManager handle the signals, instead of the NMHalManager calling
into the NMManager.
* src/nm-manager.c
src/nm-manager.h
- (remove_one_device): consolidate device removals here
- (dispose): use remove_one_device()
- (nm_manager_get_device_by_udi): make static
- (deferred_hal_manager_query_devices): idle handler to query the HAL
manager for devices at startup or wakeup time
- (nm_manager_new): create and monitor the HAL manager
- (hal_manager_udi_added_cb): new function; do what
nm_manager_add_device() used to do when signalled by the hal manager
- (hal_manager_udi_removed_cb): new function; do what
nm_manager_remove_device() used to do when signalled by the hal
manager
- (hal_manager_rfkill_changed_cb): handle rfkill changes from the
hal manager
- (hal_manager_hal_reappeared_cb): when HAL comes back, remove devices
in our device list that aren't known to HAL
- (impl_manager_sleep): on wakeup, re-add devices from an idle handler;
see comments on nm-hal-manager.c::nm_manager_state_changed() a few
commits ago
- (nm_manager_get_device_by_path, nm_manager_is_udi_managed,
nm_manager_activation_pending, nm_manager_wireless_enabled,
nm_manager_wireless_hardware_enabled,
nm_manager_set_wireless_hardware_enabled): remove, unused
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3619 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Fix the device up/down ambiguities. Up/down state used to be a
conglomeration of hardware state (IFF_UP) and any device-specific things
(supplicant, periodic timers, etc) that the device used to indicate
readiness. Unfortunately, if the hardware was already IFF_UP for some
reason, then the device specific stuff wouldn't get run, and the device
would be stuck.
* src/nm-device.c
src/nm-device.h
- Create hw_is_up, hw_bring_up, and hw_take_down
- Rename bring_down -> take_down
- (real_hw_is_up): check interface flags for IFF_UP
- (nm_device_hw_is_up): let subclasses figure out their own HW state
- (nm_device_is_up): make static; only used locally
- (nm_device_hw_bring_up): update the hardware and IPv4 addresses even
if the device is already up; if the device isn't up, bring it up
- (nm_device_hw_take_down): just take down hardware
- (nm_device_bring_up): bring up HW first, then device specific stuff
- (nm_device_take_down): always deactivate device when called; always
try to take hardware down too
- (nm_device_state_changed): take device down when entering unmanaged
state from a higher state
* src/nm-device-802-11-wireless.c
- (real_hw_is_up, real_hw_bring_up, real_hw_take_down): implement; just
check IFF_UP really
- (real_take_down, supplicant_iface_state_cb_handler,
supplicant_iface_connection_state_cb_handler,
supplicant_mgr_state_cb_handler): fix some messages
* src/nm-device-802-3-ethernet.c
- (real_hw_is_up, real_hw_bring_up, real_hw_take_down): implement; just
check IFF_UP really
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3618 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-manager.c
src/nm-manager.h
- (nm_manager_error_get_type): add new error
- (nm_manager_remove_device): don't bother taking down the device here,
the state change from unmanaging the device will do it
- (impl_manager_sleep): move nm_manager_sleep() here since nothing else
uses it; when going to sleep, just unmanage the device instead of
taking it down, because stuff will cleaned up correctly when the
device gets unmanaged
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3617 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-hal-manager.c
- (add_initial_devices): convert to a GSourceFunc prototype
- (nm_manager_state_changed): when coming out of sleep, punt the
device re-addition to an idle handler to let D-Bus events go out
first, fixing a potential dbus-glib assert if the old device was
not yet disposed (due to references held while emitting the D-Bus
signals) but the new device was found, because the mainloop didn't
run between signal emission and add_initial_devices()
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3616 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device-802-11-wireless.c
- (link_timeout_cb): don't ask for secrets when disconnected during
association/authentication phase, drivers are still just too crappy
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3613 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* callouts/Makefile.am
callouts/nm-dispatcher-action.c
callouts/nm-dispatcher-action.h
callouts/nm-dispatcher.conf
callouts/nm-dispatcher.xml
callouts/org.freedesktop.nm_dispatcher.service
- Re-implement the dispatcher as a system-bus activated service that
NM calls on-demand, rather than an always running daemon
* src/Makefile.am
- Add callouts dir to includes to pick up dispatcher defines
* src/nm-device.c
- (nm_device_state_changed): call dispatcher on device activated/
deactivated
* src/vpn-manager/nm-vpn-connection.c
- (nm_vpn_connection_set_vpn_state): call dispatcher when VPN connections
go up and down
* src/NetworkManagerUtils.c
src/NetworkManagerUtils.h
- (nm_utils_call_dispatcher): helper to call dispatcher
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3607 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerPolicy.c
- (update_routing_and_dns): when checking for a gateway, look at the
composite IP4 config, not the connection's ip4-config setting, which
doesn't include DHCP-returned information
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3589 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Implement GKeyFile system settings plugin.
Implement writing system settings (currently supported only by GKeyFile plugin).
* system-settings/src/main.c:
* system-settings/src/dbus-settings.c: Move the communication with plugins
from main.c to dbus-settings.c. Makes it possible to talk to all registered
plugins for adding/updating/removing connections.
* system-settings/src/nm-system-config-interface.c
(nm_system_config_interface_add_connection): Implement
(nm_system_config_interface_update_connection): Implement.
(nm_system_config_interface_remove_connection): Implement.
* system-settings/plugins/keyfile/Makefile.am:
* system-settings/plugins/keyfile/plugin.[ch]:
* system-settings/plugins/keyfile/writer.[ch]:
* system-settings/plugins/keyfile/reader.[ch]: Implement.
* system-settings/plugins/Makefile.am: Add GKeyFile plugin.
* configure.in: Generate GKeyFile Makefile.
* libnm-glib/nm-settings.c (impl_exported_connection_get_id): Fix a memory
corruption, need to duplicate the returned string.
(impl_exported_connection_update): Implement.
(impl_exported_connection_delete): Implement.
* introspection/nm-settings-system.xml: Add "AddConnection" method.
* introspection/nm-exported-connection.xml: Add "Update" and "Delete" methods.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3587 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-activation-request.c
src/nm-activation-request.h
- (dispose): ensure to disconnect from the device's state-changed signal
when appropriate so the signal doesn't get handled by an already
disposed NMActRequest
- (device_state_changed): update is_default here too just to make sure
default is only True when the child device is activated
- (nm_act_request_set_default): new function
* src/NetworkManagerPolicy.c
- (update_routing_and_dns): set 'default' on the active connection which
has the default route and DNS
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3584 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerPolicy.c
- (device_state_changed): update routing and DNS when a device goes
into unmanaged or unavailable states too (like rfkill or carrier loss)
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3583 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* include/NetworkManager.h
- Add NMActiveConnectionState enum
* introspection/nm-active-connection.xml
introspection/nm-vpn-connection.xml
- Add 'State' property for overall active connection state
- Add 'Default' property, when True means this active connection
has the default route
- Add PropertyChanged signals so changes actually go out over the bus
* src/nm-active-connection.h
- Add defines for State & Default properties
* src/nm-activation-request.c
- Add 'state' and 'default' properties, hook up to device 'state-changed'
signal to determine active connection state
* src/vpn-manager/nm-vpn-connection.c
src/vpn-manager/nm-vpn-connection.h
src/vpn-manager/nm-vpn-manager.c
src/vpn-manager/nm-vpn-service.c
- Rename old 'state' to 'vpn-state'
- Rename nm_vpn_connection_get_state() -> nm_vpn_connection_get_vpn_state()
- Add 'state' and 'default' properties, hook up to the vpn connection's
'vpn-state-changed' signal
* libnm-glib/nm-active-connection.c
libnm-glib/nm-active-connection.h
- Add new 'state' and 'default' properties and accessors
* libnm-glib/nm-vpn-connection.c
libnm-glib/nm-vpn-connection.h
- Rename old 'state' property to 'vpn-state'
- Add new 'state' and 'default' properties and accessors
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3582 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerUtils.c
src/NetworkManagerUtils.h
- (nm_utils_merge_ip4_config): new function; merge settings from an
NMSettingIP4Config to an NMIP4Config object
* src/nm-device.c
- (merge_ip4_config): move to NetworkManagerUtils.c
* src/vpn-manager/nm-vpn-connection.c
- (nm_vpn_connection_ip4_config_get): merge in user-specified settings
too
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3580 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-util/nm-setting-ppp.c
libnm-util/nm-setting-ppp.h
src/ppp-manager/nm-ppp-manager.c
- Remove the 'usepeerdns' option and always request DNS servers from
the PPP server; the connection chooses to use/override/ignore the
DNS servers returned from the PPP server
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3576 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-util/nm-setting-ppp.c
libnm-util/nm-setting-ppp.h
src/ppp-manager/nm-ppp-manager.c
- Remove the 'require-mppc' option, because pppd doesn't support it and
it seems to have been an erroneous addition to the PPTP plugin in
the first place (from which the ppp-manager is derived)
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3575 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-util/nm-setting-pppoe.c
- (verify): require a PPP setting too
* src/ppp-manager/nm-ppp-manager.c
- (nm_ppp_manager_start): fail if no PPP setting is present instead of
segfaulting
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3574 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device.c
- (nm_device_state_changed): do deactivation and and promotion to
unavailable here, so that the device gets cleaned up before the
manager runs and starts emitting signals; do the
FAILED->DISCONNECTED transition from an idle handler rather than
immediately to guard against recursion
- (nm_device_deactivate_quickly, nm_device_dispose): stop the
FAILED->DISCONNECTED handler if it's scheduled
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3573 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device-802-11-wireless.c
- (state_changed_cb): clear AP list when device transitions to
unavailable or unmanaged
- (nm_device_802_11_wireless_dispose): remove redundant set_current_ap()
since this is already done in device_cleanup()
- (supplicant_iface_scanned_ap_cb): don't leak new APs when the device
isn't available or managed
- (device_cleanup): use remove_all_aps()
- (remove_all_aps): consolidate code removing all APs
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3572 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-serial-device.c
src/nm-serial-device.h
- (wait_for_reply_got_data): break input into lines, and search each
line for responses _and_ terminator strings; also make sure that
the read loop doesn't continue after the timeout is supposed to fire
- (nm_serial_device_wait_for_reply): take an array of terminators too
* src/nm-gsm-device.c
src/nm-cdma-device.c
- Send terminators to nm_serial_device_wait_for_reply()
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3570 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from 陈鑫 <znscnchen@gmail.com>
* src/ppp-manager/nm-pppd-plugin.c
- (get_credentials): return correct value for success; handle case where
pppd just does some checking but doesn't want a password
- (plugin_init): make CHAP work too
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3569 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from 陈鑫 <znscnchen@gmail.com>
* src/nm-device-802-3-ethernet.c
- (real_deactivate_quickly): clear the IP interface name on
deactivation, otherwise the wrong interface might get used later
for routing and IP management
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3567 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Remove exposure of wireless-tools mode types in the API.
* include/NetworkManager.h
- Define NM80211Mode enum
* introspection/generic-types.xml
- Describe NM_802_11_MODE enum
- Remove IW_MODE_* enum
* introspection/nm-access-point.xml
libnm-glib/nm-access-point.c
libnm-glib/nm-access-point.h
- 'mode' is now of type NM80211Mode, a DBUS_TYPE_UINT
* introspection/nm-device-802-11-wireless.xml
libnm-glib/nm-device-802-11-wireless.c
libnm-glib/nm-device-802-11-wireless.h
- 'mode' is now of type NM80211Mode, a DBUS_TYPE_UINT
* libnm-util/nm-setting-wireless.c
src/NetworkManagerAP.c
src/NetworkManagerAP.h
src/nm-device-802-11-wireless.c
src/nm-device-802-11-wireless.h
test/nm-tool.c
- Use NM80211Mode not IW_MODE_*
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3562 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Enhance nm-online based on a patch from Bill Nottingham.
* test/nm-online.c
- Add a '-q' option
- Add help messages and option summary
- Add long-format options
- Add a '-x' option to exit if NM isn't running or isn't connecting
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3561 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* system-settings/plugins/ifcfg-suse/parser.c (make_wireless_security_setting):
Make it compile again by commenting out broken code that at first didn't work and
now didn't compile either.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3550 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-glib/nm-object-cache.c
libnm-glib/nm-settings.c
src/dhcp-manager/nm-dhcp-manager.c
system-settings/plugins/ifcfg-fedora/plugin.c
system-settings/plugins/ifcfg-suse/plugin.c
system-settings/src/nm-system-config-hal-manager.c
libnm-util/nm-utils.c
- Remove usage of GStaticMutex since gcc-4.3 hates it and because we're
not threadsafe anyway
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3548 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* system-settings/src/main.c
- (load_stuff, device_added_cb, device_removed_cb): device added/removed
callbacks take a device type too
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3546 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
The system settings service will now create a new default DHCP connection
for wired devices that have no existing applicable connection.
* system-settings/src/nm-system-config-hal-manager.c
system-settings/src/nm-system-config-hal-manager.h
- (nm_system_config_hal_manager_get_type_for_udi): new function
* system-settings/src/dbus-settings.c
system-settings/src/dbus-settings.h
- (nm_sysconfig_settings_get_connections): new function
- (nm_sysconfig_settings_is_device_managed): new function
* system-settings/src/main.c
- (load_stuff): check for wired devices that need a default connection
- (get_details_for_udi): get interface and MAC address from HAL
- (add_default_dhcp_connection): add a default connection for a wired
device if needed
- (device_added_cb, device_removed_cb): do the right thing with
wired devices and their default connections on HAL device events
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3544 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-gsm-device.c
src/nm-cdma-device.c
- (state_changed_cb): when entering UNAVAILABLE state, schedule an idle
handler to transition to DISCONNECTED
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3542 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* include/NetworkManager.h
- Remove the DOWN and CANCELLED device states
- Add UNMANAGED and UNAVAILABLE device states
- Document the device states
* introspection/nm-device.xml
src/nm-device-interface.c
src/nm-device-interface.h
- Add the 'managed' property
* test/nm-tool.c
- (detail_device): print out device state
* src/NetworkManagerSystem.h
src/backends/NetworkManagerArch.c
src/backends/NetworkManagerDebian.c
src/backends/NetworkManagerFrugalware.c
src/backends/NetworkManagerGentoo.c
src/backends/NetworkManagerMandriva.c
src/backends/NetworkManagerPaldo.c
src/backends/NetworkManagerRedHat.c
src/backends/NetworkManagerSlackware.c
src/backends/NetworkManagerSuSE.c
- (nm_system_device_get_system_config, nm_system_device_get_disabled
nm_system_device_free_system_config): remove; they were unused and
their functionality should be re-implemented in each distro's
system settings service plugin
* src/nm-gsm-device.c
src/nm-gsm-device.h
src/nm-cdma-device.c
src/nm-cdma-device.h
- (*_new): take the 'managed' argument
* src/nm-device.c
- (nm_device_set_address): remove, fold into nm_device_bring_up()
- (nm_device_init): start in unmanaged state, not disconnected
- (constructor): don't start device until the system settings service
has had a chance to figure out if the device is managed or not
- (nm_device_deactivate, nm_device_bring_up, nm_device_bring_down):
don't set device state here, let callers handle that as appropriate
- (nm_device_dispose): don't touch the device if it's not managed
- (set_property, get_property, nm_device_class_init): implement the
'managed' property
- (nm_device_state_changed): bring the device up if its now managed,
and deactivate it if it used to be active
- (nm_device_get_managed, nm_device_set_managed): do the right thing
with the managed state
* src/nm-hal-manager.c
- (wired_device_creator, wireless_device_creator, modem_device_creator):
take initial managed state and pass it along to device constructors
- (create_device_and_add_to_list): get managed state and pass to
type creators
* src/nm-device-802-11-wireless.c
- (real_can_activate): fold in most of
nm_device_802_11_wireless_can_activate()
- (can_scan): can't scan in UNAVAILABLE or UNMANAGED
- (link_timeout_cb): instead of deactivating, change device state and
let the device state handler to it
- (real_update_hw_address): clean up
- (state_changed_cb): when entering UNAVAILABLE state, schedule an idle
handler to transition to DISCONNECTED if the device isn't rfkilled
* src/nm-device-802-3-ethernet.c
- (set_carrier): move above callers and get rid of prototype
- (device_state_changed): when entering UNAVAILABLE state, schedule an
idle handler to transition to DISCONNECTED if the device has a
carrier
- (real_update_hw_address): clean up
- (link_timeout_cb, ppp_state_changed): change state instead of calling
deactivation directly as deactivation doesn't change state anymore
* src/NetworkManagerPolicy.c
- (schedule_activate_check): yay, remove wireless_enabled hack since
the NMManager and wireless devices work that out themselves now
- (device_state_changed): change to a switch and update for new device
states
- (device_carrier_changed): remove; device handles this now through
state changes
- (device_added): don't care about carrier any more; the initial
activation check will happen when the device transitions to
DISCONNECTED
* src/nm-manager.c
- (dispose): clear unmanaged devices
- (handle_unmanaged_devices): update unmanaged device list and toggle
the managed property on each device when needed
- (system_settings_properties_changed_cb): handle signals from the
system settings service
- (system_settings_get_unmanaged_devices_cb): handle callback from
getting the unmanaged device list method call
- (query_unmanaged_devices): ask the system settings service for its
list of unmanaged devices
- (nm_manager_name_owner_changed, initial_get_connections): get unmanaged
devices
- (manager_set_wireless_enabled): push rfkill state down to wireless
devices directly and let them handle the necessary state transitions
- (manager_device_state_changed): update for new device states
- (nm_manager_add_device): set initial rfkill state on wireless devices
- (nm_manager_remove_device): don't touch the device if it's unmanaged
- (nm_manager_activate_connection): return error if the device is
unmanaged
- (nm_manager_sleep): handle new device states correctly; don't change
the state of unavailable/unmanaged devices
* libnm-glib/nm-device-802-11-wireless.c
- (state_changed_cb): update for new device states
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3540 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* system-settings/src/main.c
- (unmanaged_devices_changed_cb, register_plugin): proxy changes from
plugins to the dbus settings object
- (load_stuff): start the dbus service after grabbing unmanaged devices
- (dbus_reconnect, dbus_cleanup): make HAL manager aware of dbus events
- (log_handler, logging_setup, logging_shutdown): log output to syslog
- (main): switch default logging to syslog with a 'debug' option to
output to console; start up the HAL manager
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3538 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* introspection/nm-settings-system.xml
introspection/Makefile.am
- Define the unmanaged devices interface for the system settings service
* system-settings/src/nm-system-config-hal-manager.c
system-settings/src/nm-system-config-hal-manager.h
system-settings/src/nm-system-config-hal-manager-private.h
system-settings/src/Makefile.am
- Add a lightweight HAL manager object for tracking network devices for
the purpose of determining unmanaged devices and which devices need
the default DHCP connections
* system-settings/src/nm-system-config-interface.c
system-settings/src/nm-system-config-interface.h
- (nm_system_config_interface_init): add the HAL manager as an argument
- (nm_system_config_interface_get_unmanaged_devices): implement
- Define 'unmanaged-devices-changed' signal
* system-settings/src/dbus-settings.c
system-settings/src/dbus-settings.h
- Implement the unmanaged devices interface; some cleanups
* system-settings/plugins/ifcfg-suse/plugin.c
- Fixup for plugin interface changes
* system-settings/plugins/ifcfg-fedora/plugin.c
- (get_ether_device_udi): new function; find the device that has
a specified MAC address and return its UDI
- (get_udi_for_connection): new function; try to find the specific
device a connection is locked to, if any
- (device_added_cb, device_removed_cb): update unmanaged device list in
response to HAL events
- (get_unmanaged_devices): new function; return unmanaged device list
- (build_one_connection): set the connection's locked device, if any
- (write_auto_wired_connection): remove
- (kill_old_auto_wired_file): remove the ifcfg-Auto Wired file if found
- (handle_connection_changed): alert listeners that the unmanaged device
list has changed
- (init): fixup for plugin interface changes, implement unmanaged devices
* system-settings/plugins/ifcfg-fedora/parser.c
system-settings/plugins/ifcfg-fedora/parser.h
- (connection_data_free): clean up connection UDI
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3537 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-hal-manager.c
src/nm-hal-manager.h
- (hal_init): don't look for hardware here
- (nm_hal_manager_start): new function; look for hardware here instead,
which can be done at a later time than hal_init()
* src/NetworkManager.c
- (main): start HAL manager after entering the main loop
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3530 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-glib/nm-settings.c
libnm-glib/nm-settings.h
- (nm_exported_connection_get_id): new function
- (impl_exported_connection_get_id): use nm_exported_connection_get_id()
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3528 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* system-settings/plugins/ifcfg-fedora/parser.c
- (read_mac_address): new function; read in MAC address and stuff it
into the connection
- (add_one_wep_key): remove debug spew
- (make_wireless_security_setting): validate the default TX key; don't
add the wireless-security setting if the connection doesn't need
security; don't leak the keys shvarFile on error cases
- (make_wireless_setting, make_wired_setting): populate device's MAC
address
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3526 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/vpn-manager/nm-vpn-service.c
- (nm_vpn_service_daemon_exec): add an error argument so that spawn
errors can be passed back to the caller; also no longer scheduled
as an idle handler, but called directly; and bump up VPN service
spawn timeout, 2s is really short
- (nm_vpn_service_activate): don't schedule the VPN service activation,
but call it directly so that errors are reported on return from
ActivateConnection() and don't get lost. If scheduled as an idle
handler, clients don't have the time to query NM for the new VPN
connection's properties before the VPN connection is torn down again
if the service couldn't be launched, and therefore launch errors
get lost.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3521 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/vpn-manager/nm-vpn-connection.c
- (device_state_changed): send correct state on device failure too
- (plugin_state_changed): failed state means unexpected disconnection,
thus if the service goes away while the VPN connection is activated
that's a failure too
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3520 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-glib/nm-client.c
libnm-glib/nm-client.h
- (activate_cb): pass the new active connection to callback; fix
message when no callback is specified
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3518 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-util/nm-setting-wireless-security.c
- (need_secrets): only require key0 if the transmit key index is also
0
- (verify): reject non-NULL but zero-length WEP keys; these are invalid
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3515 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/vpn-manager/nm-vpn-connection.c
- (nm_vpn_connection_class_init): PROP_SPECIFIC_OBJECT should be boxed,
not string
* src/nm-activation-request.c
- (nm_act_request_class_init): PROP_SPECIFIC_OBJECT should be boxed,
not string
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3513 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* system-settings/plugins/ifcfg-fedora/parser.c
- Fix parsing of WEP keys; ifcfg files use indexes [1...4] rather than
[0...3]; also handle KEY correctly in combination with DEFAULTKEY
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3509 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* nm-object.c
- (nm_object_queue_notify): don't notify multiple times for the same
property
* nm-object-private.h
- (handle_ptr_array_return): return NULL if the given array is NULL or
if it has zero elements
* nm-ip4-config.c
- (finalize): use g_ptr_array_foreach() when freeing domains
- (nm_ip4_config_get_domains): use handle_ptr_array_return()
* nm-active-connection.c
- (nm_active_connection_get_devices): use handle_ptr_array_return()
* nm-device-802-11-wireless.c
nm-device-802-11-wireless.h
- (nm_device_802_11_wireless_get_access_points): return const; use
handle_ptr_array_return()
* nm-types.c
- (nm_object_array_demarshal): always create an array, even of length
zero, to distinguish between "NM returned no items" and "haven't
asked NM yet"
* nm-client.c
- (dispose): free active connections too
- (proxy_name_owner_changed): free active connections too when NM goes
away
- (nm_client_get_devices): return const; use handle_ptr_array_return()
- (nm_client_get_active_connections): use handle_ptr_array_return()
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3506 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Rework VPN connection handling for a more consistent D-Bus API. The
VPNManager object has been removed, and active VPN connections are now the
same as any other active connection. The Manager object's ActivateConnection
and DeactivateConnection methods are used to start and stop a VPN connection,
and the VPNConnection objects are subclasses of the ActiveConnection objects.
When activating a VPN connection, pass the path of the active connection
to which the VPN connection is tied in the 'specific_object' argument.
Consequently, the libnm-glib API has been reworked to match this arrangement,
with the VPNManager object removed, and the NMVPNConnection objects now
being subclasses of NMActiveConnection.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3504 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Björn Martensen <bjoern.martensen@gmail.com>
* initscript/Arch/networkmanager.in
initscript/Arch/networkmanager-dispatcher.in
- Updates for Arch Linux
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3503 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-glib/nm-ip4-config.c
libnm-glib/nm-active-connection.c
libnm-glib/nm-access-point.c
- Use nm_object_queue_notify() instead of g_object_notify()
* libnm-glib/nm-device.c
- (demarshal_ip4_config): distinguish between successful but missing
ip4-config request, and unsuccessful and missing ip4-config request
- (nm_device_get_ip4_config): don't try to demarshal a NULL ip4-config
path
- Use nm_object_queue_notify() instead of g_object_notify()
* libnm-glib/nm-device-802-11-wireless.c
- (demarshal_active_ap): distinguish between successfull but missing
active-ap request, and unsuccessful and missing active-ap request
- (dispose, clean_up_aps): consolidate AP list and active AP clearing
code
- (nm_device_802_11_wireless_set_wireless_enabled): add a private hook
for the NMClient to notify the device that wireless is disabled,
and therefore to clear the AP list and active AP
- Use nm_object_queue_notify() instead of g_object_notify()
* libnm-glib/nm-client.c
- (poke_wireless_devices_with_rf_status): new function
- (update_wireless_status): notify wireless devices of the rfkill status
so they can clean up if needed
- Use nm_object_queue_notify() instead of g_object_notify()
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3502 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-glib/nm-client.c
- (client_device_added_proxy): add new devices to the internal device
list so they appear to clients
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3496 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Massive fixup of libnm-glib to:
a) have all objects (with the exception of VPN) cache their properties and
update them asynchronously on PropertiesChanged signals from NM
b) return internal const data for most attributes/properties instead of
allocated values that the caller must free
c) cache wrapped objects such that a given D-Bus path will always map to the
same GObject returned by libnm-glib
d) remove a few signals and move them to GObject property notifications
e) match recent NM D-Bus API changes for activation/deactivation
f) remove some private functions from libnm-glib headers
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3491 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* introspection/nm-manager.xml
introspection/nm-manager-client.xml
- (ActivateConnection): return the object path of the active connection
on success
- (GetActiveConnections): remove
- (DeactivateConnection): new function; deactivate a currently active
connection
- Add an ActiveConnections property which returns an array of
active connection object paths
* introspection/nm-device.xml
- (Deactivate): remove
* introspection/all.xml
- Add ActiveConnection introspection
* introspection/nm-active-connection.xml
- Add the ActiveConnection object
* include/NetworkManager.h
- Add the Connection.Active D-Bus interface
* src/nm-device-interface.c
- (impl_device_deactivate): remove
* src/nm-activation-request.c
src/nm-activation-request.c
src/Makefile.am
- Implement the Connection.Active D-Bus interface
* src/nm-manager.c
- (get_property, nm_manager_class_init): add ACTIVE_CONNECTIONS property
- (nm_manager_activate_device): return the active connection path
- (connection_added_default_handler, impl_manager_activate_connection):
return the active connection to the caller
- (add_one_connection_element, impl_manager_get_active_connections):
remove
- (impl_manager_deactivate_connection): new function; deactivate an
active connection
* libnm-glib/nm-device.c
libnm-glib/nm-device.h
- Remove Deactivate() function
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3484 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* introspection/nm-manager.xml
introspection/nm-manager-client.xml
- Rename the ActivateDevice method to ActivateConnection to better
reflect it's usage; it's arguments get reordered a bit too
- Convert GetActiveConnections method return from a struct to a dict
* include/NetworkManager.h
- Define the dict keys for return value of GetActiveConnections
* src/nm-manager.c
- impl_manager_activate_device -> impl_manager_activate_connection
- (add_one_connection_element): return a populated hash table, not
a structure
* libnm-glib/nm-client.c
libnm-glib/nm-client.h
- nm_client_activate_device -> nm_client_activate_connection
- nm_client_free_active_connection_element -> nm_client_free_active_connections_element
- (nm_client_get_active_connections): return a GSList of GHashTables,
instead of the custom structures. Each element of the returned list
must be freed with nm_client_free_active_connections_element()
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3482 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Date: Tue Mar 18 21:46:10 2008 -0600
2008-03-18 Tambet Ingo <tambet@gmail.com>
* src/ppp-manager/nm-ppp-manager.c (nm_ppp_manager_update_secrets): Don't
print out username and password, it's supposed to be a secret.
* src/nm-device-802-3-ethernet.c (ppp_state_changed): Handle authentication
request and set the device state accordingly.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3481 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* system-settings/plugins/ifcfg-fedora/parser.c
system-settings/plugins/ifcfg-fedora/parser.h
system-settings/plugins/ifcfg-fedora/plugin.c
- Read settings from /etc/sysconfig/network-scripts/ instead of using
profiles. DNS servers and searches must now be stored in the ifcfg
files themselves
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3475 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Adapt system settings service for split 802.1x.
* system-settings/src/nm-system-config-interface.h
- clarify return value of get_secrets()
* system-settings/src/dbus-settings.c
- (string_to_gvalue, destroy_gvalue, add_one_secret_to_hash): remove
- (check_for_secrets): check if there actually secrets returned by a
plugin
- (exported_connection_get_secrets): just return the plugin-returned
hash of settings' secrets if it looks valid
* system-settings/plugins/ifcfg-fedora/plugin.c
- (get_secrets): add split secrets with correct format to reply hash
* system-settings/plugins/ifcfg-fedora/parser.c
system-settings/plugins/ifcfg-fedora/parser.h
- (copy_one_cdata_secret, connection_data_copy_secrets,
connection_data_free, connection_data_add): keep secrets for
different settings in different hashes
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3472 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Date: Mon Mar 17 12:27:01 2008 -0600
2008-03-17 Tambet Ingo <tambet@gmail.com>
Clean up activating device deactivation.
* src/nm-device.c (real_activation_cancel_handler): Remove. The same thing
should be done whether the device activation gets cancelled or the device
is just getting deactivated.
(nm_device_activation_cancel): Remove.
(nm_device_deactivate_quickly): Handle the case where device is activating.
* src/nm-device-802-11-wireless.c (real_activation_cancel_handler): Remove.
It does the exact same thing as real_deactivate_quickly().
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3471 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Split the 802.1x bits out of the wireless-security setting so they are
generalized enough for wired 802.1x to use too.
* introspection/nm-exported-connection.xml
- GetSecrets now returns 'a{sa{sv}}' (a hash of settings hashes) instead
of just a hash of the secrets for one setting
* libnm-util/nm-setting-wireless-security.c
libnm-util/nm-setting-wireless-security.h
- Remove 802.1x-specific stuff
- Added leap-username and leap-password properties for old-school LEAP
* src/nm-device.c
src/nm-device.h
- (connection_secrets_updated_cb): take a list of updated settings names,
not just one
* src/supplicant-manager/nm-supplicant-config.c
src/supplicant-manager/nm-supplicant-config.h
- (nm_supplicant_config_add_setting_wireless_security): remove 802.1x
specific stuff; fix for updated LEAP bits; punt 802.1x stuff
to nm_supplicant_config_add_setting_8021x()
- (nm_supplicant_config_add_setting_8021x): add an 802-1x setting to
the supplicant config
* src/nm-device-802-11-wireless.c
- (build_supplicant_config): pass in the 802.1x setting too, if any
- (real_connection_secrets_updated): take a list of updated settings
names, not just one
* src/nm-device-802-3-ethernet.c
src/nm-cdma-device.c
src/nm-gsm-device.c
- (real_connection_secrets_updated_cb): take a list of updated settings
names, not just one
* src/nm-activation-request.c
src/nm-activation-request.h
- (nm_act_request_class_init): the 'connection-secrets-updated' signal
now passes a list of updated settings names, not just one
- (update_one_setting): new function; handle one updated setting
- (get_secrets_cb): handle multiple settings returned from the
settings service; have to be careful of ordering here as there are
some dependencies between settings (ex. wireless-security and 802.1x
in some cases)
* src/marshallers/nm-marshal.list
- new marshaller for connection-secrets-updated signal
* libnm-util/nm-setting-8021x.c
- Add back the 'pin' and 'psk' settings, for EAP-SIM and EAP-PSK auth
methods
- (verify): a valid 'eap' property is now required
* libnm-util/nm-connection.c
- (register_default_settings): add priorities to settings; there are
some dependencies between settings, and during the need_secrets
calls this priority needs to be respected. For example, only the
wireless-security setting knows whether or not the connection is
going to use 802.1x or now, so it must be asked for secrets before
any existing 802.1x setting is
- (nm_connection_lookup_setting_type): expose
* libnm-util/nm-setting-wireless.c
- (verify): should verify even if all_settings is NULL; otherwise won't
catch the case where there is missing security
* libnm-util/nm-setting-wireless-security.c
- Remove everything to do with 802.1x
- Add old-school LEAP specific properties for username and password
- (need_secrets): rework LEAP secrets checking
- (verify): rework for LEAP and 802.1x verification
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3470 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerPolicy.c
- (auto_activate_device): always remove the current activation check
from the pending activation list, otherwise when the policy gets
destroyed on NM exit it will attempt to free the already freed
activation check
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3469 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-manager.c
- (nm_device_interface_get_iface): g_object_get() will return an
allocated value, so this function must not return const
- (nm_device_interface_activate): free returned iface
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3464 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* include/wireless-helper.h
include/Makefile.am
- One place for all the junk needed for #including wireless.h
* test/nm-tool.c
src/NetworkManagerAP.c
src/wpa.c
src/Makefile.am
libnm-util/nm-utils.c
libnm-util/nm-setting-wireless.c
libnm-glib/nm-device-802-11-wireless.c
libnm-glib/nm-access-point.c
libnm-glib/libnm-glib-test.c
- include wireless-helper.h, not iwlib.h
* configure.in
- Don't need libiw really, just need to check for wireless.h
* src/kernel-types.h
- Remove; used types moved into wpa.c
* src/nm-device-802-11-wireless.c
- (nm_device_802_11_wireless_update_signal_strength,
real_get_generic_capabilities, nm_device_802_11_wireless_get_mode,
nm_device_802_11_wireless_set_mode,
nm_device_802_11_wireless_get_frequency,
nm_device_802_11_wireless_get_ssid,
nm_device_802_11_wireless_set_ssid,
nm_device_802_11_wireless_get_bitrate,
nm_device_802_11_wireless_get_bssid,
nm_device_802_11_wireless_disable_encryption): use ioctl() directly
instead of iwlib functions
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3462 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/ppp-manager/nm-ppp-manager.c
- (impl_ppp_manager_need_secrets): since it's asynchronous now, it
should only take the DBusGMethodInvocation argument, not user/pass
too. With dbus-glib, async functions only take 2 C arguments since
the real dbus method arguments get passed back with
dbus_g_method_return()
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3455 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-util/nm-setting-ip4-config.c
libnm-util/nm-setting-ip4-config.h
- Remove 'manual' and 'autoip' properties
- Add 'method' property
- (verify): fix verification with 'method'
- (finalize): free 'method'
- (set_property, get_property, nm_setting_ip4_config_class_init): fix
up for 'method'
* src/nm-device.c
- (real_act_stage3_ip_config_start): check IP4Config method
- (nm_device_new_ip4_autoip_config): add a note about not sucking in
the future
- (merge_ip4_config): IP settings are valid with DHCP too
- (real_act_stage4_get_ip4_config): handle all IP4Config methods
- (real_act_stage4_ip_config_timeout): don't do autoip on DHCP timeout
* src/nm-device-802-11-wireless.c
- (real_act_stage3_ip_config_start): remove; autoip only on demand
- (real_act_stage4_get_ip4_config): just chain up to parent; autoip
only on demand
* system-settings/plugins/ifcfg-fedora/parser.c
system-settings/plugins/ifcfg-suse/parser.c
- (make_ip4_setting): fix up for 'method'
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3443 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* system-settings/plugins/ifcfg-fedora/parser.c
system-settings/plugins/ifcfg-fedora/parser.h
- (get_ifcfg_name): ignore more file suffixes
- (is_wireless_device): fix check for ifcfgs that have no TYPE
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3442 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* system-settings/plugins/ifcfg-fedora/plugin.c
- (write_auto_wired_connection): new function; write out an auto
wired connection file since the applet isn't doing it any more
- (reload_all_connections): write out the auto wired connection file
if there aren't any wired connections already
- (init): don't leak a GError
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3435 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device.c
- (nm_device_set_ip4_config): don't send property notifications when
the ip4 config is set to NULL; it causes a PropertyChanged signal
which dbus-glib can't parse because the value is NULL, which isn't
a legal object path. Setting the IP4 config to NULL is only
valid when deactivating a device anyway, so the device state change
will alert listeners that the ip4 config is invalid.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3431 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Move the 'carrier' property from NMDevice to NMDevice8023Ethernet;
convert the libnm-glib NMDevice8023Ethernet to cached properties
* introspection/nm-device-802-3-ethernet.xml
- New 'Carrier' property
- New 'PropertiesChanged' signal
* introspection/nm-device.xml
- Remove 'Carrier' property
- Remove 'CarrierChanged' signal
* src/nm-device-interface.c
src/nm-device-interface.h
- (nm_device_interface_init): remove 'carrier' property and
'carrier-changed' signal
* src/nm-device.c
src/nm-device.h
- (nm_device_get_carrier, nm_device_set_carrier): remove
- (nm_device_activate_stage5_ip_config_commit): don't bother updating
the link here; wired device will handle that
- (handle_dhcp_lease_change): don't bother updating link here
- (get_property, nm_device_class_init): remove carrier property
* src/nm-device-802-11-wireless.c
- (real_update_link, nm_device_802_11_wireless_class_init): remove
real_update_link(); wireless devices don't use carrier at all
- (link_timeout_cb, supplicant_iface_state_cb_handler,
supplicant_iface_connection_state_cb_handler,
supplicant_mgr_state_cb_handler): remove anything to do with carrier
* src/nm-device-802-3-ethernet.c
src/nm-device-802-3-ethernet.h
- (nm_device_802_3_ethernet_carrier_on,
nm_device_802_3_ethernet_carrier_off, constructor): use set_carrier()
instead of nm_device_set_carrier()
- (device_state_changed): update link from sysfs on activation;
replaces real_update_link()
- (real_update_link): remove, replaced by device_state_changed()
- (nm_device_802_3_ethernet_get_carrier, set_carrier): new functions
- (nm_device_802_3_ethernet_get_speed): move up with other getters/setters
- (real_get_generic_capabilities, real_can_interrupt_activation): use
new get_carrier function
- (get_property): add 'carrier' property
- (nm_device_802_3_ethernet_class_init): add 'carrier' property and
hook into property-changed signal helper
* src/NetworkManagerPolicy.c
- (device_carrier_changed): will only ever be called with a wired device
- (device_added): only hook up to carrier-changed for wired devices
* libnm-glib/nm-device.c
libnm-glib/nm-device.h
- (constructor, nm_device_class_init): remove carrier-changed signal
- (device_carrier_changed_proxy): remove; unused
- (nm_device_get_carrier): remove; carrier a property of wired devices
* libnm-glib/nm-device-802-3-ethernet.c
libnm-glib/nm-device-802-3-ethernet.h
- Convert to cached properties like AP and Wireless objects
- (nm_device_802_3_ethernet_get_hw_address): now returns a 'const char *'
instead of a 'char *', return value should not be freed
- (nm_device_802_3_ethernet_get_carrier): return current carrier status
- (constructor): hook into properties-changed helper
- (set_property, get_property): new functions
- (nm_device_802_3_ethernet_class_init): export GObject properties
* test/nm-tool.c
- (detail_device): strdup the wired hardware address too since it's
cached now
* libnm-glib/libnm-glib-test.c
- (dump_wired): strdup the wired hardware address too since it's
cached now
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3428 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device.c
- (nm_device_deactivate): don't need to munge DNS here; that gets done
already in nm_device_set_ip4_config()
- (handle_dhcp_lease_change): fail the device if setting the IP4Config
due to a DHCP rebind fails
- (nm_device_set_ip4_config): send property notifications when the
ip4 config changes
- (get_property): only report IP4Config property during valid states
* src/NetworkManagerPolicy.c
- (update_routing_and_dns): ignore devices that don't have an ip4
config; add parameter 'force_update' to allow callers to specify
that changes should be made even if the default device doesn't change
- (device_ip4_config_changed): update DNS and routing when the device's
IP4Config changes, like for DHCP updates
- (device_added): listen for ip4-config property changes
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3425 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Fix address handling as a result of DHCP rebind/renew/reboot.
* src/NetworkManagerSystem.c
- (check_one_address): delete an address if it doesn't match a given
one for the same interface
- (nm_system_device_set_from_ip4_config): don't flush the default route,
be smarter about flushing addresses (only flush ones that don't
match the one we're about to apply)
* src/backends/NetworkManagerDebian.c
src/backends/NetworkManagerSuSE.c
src/backends/NetworkManagerArch.c
src/backends/NetworkManagerSlackware.c
src/backends/NetworkManagerRedHat.c
src/backends/NetworkManagerPaldo.c
src/backends/NetworkManagerFrugalware.c
src/backends/NetworkManagerGentoo.c
- (nm_system_delete_default_route): remove
* src/backends/NetworkManagerGeneric.c
src/backends/NetworkManagerGeneric.h
- (nm_generic_enable_loopback): fix the loopback device label
- (nm_generic_delete_default_route): remove; no longer used
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3424 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device-interface.h
- Delimit property name words with '-', otherwise g_object_notify()
doesn't work the way we expect
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3423 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerPolicy.c
- (update_routing_and_dns): don't change anything if the default device
hasn't changed; print something out when switching the default route
and DNS
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3419 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device.c
- (handle_dhcp_lease_change): apply an IP4 config to a device in
response to a DHCP lease change
- (dhcp_state_changed): handle DHCP lease changes while activated
- (nm_device_set_ip4_config): remove a previously set named config
when setting an ip4 config
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3417 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-serial-device.c
- (nm_serial_device_send_command): report errno on error
- (get_reply_got_data): limit the size of the overall buffer
- (wait_for_reply_info_destroy): destroy result string
- (wait_for_reply_got_data): append received data to an overall buffer
until timeout, filled buffer, or error instead of keeping a per-call
buffer. Some devices send data slowly enough that this function
gets called multiple times for the same command stream.
- (nm_serial_device_wait_for_reply): initialize overall buffer for
wait_for_reply_got_data() here
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3415 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch based on ideas suggested by Bas Zoetekouw <bas@debian.org>
* src/named-manager/nm-named-manager.c
- (compute_searches): prefer searches before domains
- (compute_domain): new function
- (rewrite_resolv_conf): write out the 'domain' and 'searches' options
- (merge_one_ip4_config): if there are no searches in the source config,
merge domains of the source config into the target config
- (compute_nameservers): make formatting of resolv.conf a bit nicer
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3413 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-serial-device.c
- (get_reply_got_data): clean up indentation, shrink serial buffer
- (wait_for_reply_got_data): try to handle slower serial devices where
the reply is broken up into multiple reads by concatenating replies
together until either an error is received or the search string is
found
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3412 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device.c
- (nm_device_bring_down): deactivate the device if it's activating too,
not just if it's already activated. This makes sure that everything
from an association attempt is cleaned up (like DHCP for example)
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3411 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Bas Zoetekouw <bas@debian.org>
* src/nm-ip4-config.c
src/nm-ip4-config.h
- (nm_ip4_config_add_search, nm_ip4_config_get_search,
nm_ip4_config_get_num_searches): add 'searches' as distinct from
domains. 'searches' is the correct way to store multiple search
domains, whereas 'domains' is really just supposed to store one
domain. Some sites abuse the DHCP 'domain-name' option to push
search domains to the client.
- (nm_ip4_config_add_domain): group with related functions (my patch)
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3402 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* system-settings/plugins/ifcfg-fedora/parser.c
- (is_wireless_device): new function; test a device for wireless
extensions
- (parser_parse_file): if the ifcfg file doesn't have a TYPE tag,
test the device for wireless extensions to determine the type
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3394 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Change manager's StateChange signal to StateChanged for consistency.
* introspection/nm-manager.xml
- Add 'StateChanged' signal
- Move 'StateChange' down to the deprecated section
* src/nm-hal-manager.c
- (nm_hal_manager_new): connect to 'state-changed' instead
* src/NetworkManagerPolicy.c
- (nm_policy_new): connect to 'state-changed' instead
* src/nm-manager.c
src/nm-manager.h
- (nm_manager_update_state): emit both 'state-changed' and 'state-change'
- (nm_manager_class_init): add 'state-changed' and not the deprecation
of 'state-change'
* libnm-glib/nm-client.c
libnm-glib/nm-client.h
- (constructor, nm_client_class_init, client_state_changed_proxy):
track and proxy 'state-changed' instead of 'state-change'
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3393 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
First pass of multiple active device support. Expect bugs.
* src/nm-ip4-config.c
src/nm-ip4-config.h
- (nm_ip4_config_get_secondary, nm_ip4_config_set_secondary): remove;
there are better ways to do this in the named manager
* src/nm-device.c
src/nm-device.h
- (nm_device_can_activate): return whether the device can activate a
connection right now; taking into account things like carrier state
and rfkill state
- (nm_device_get_best_auto_connection): renamed from
nm_device_get_best_connection
- (real_act_stage4_get_ip4_config): MTU stuff is now handled in the
device subclasses themselves, so that each device can override the
MTU from it's NMSetting subclass if needed
- (nm_device_set_ip4_config): set MTU when setting up routes and stuff
in NetworkManagerSystem.c, not here
* src/named-manager/nm-named-manager.c
src/named-manager/nm-named-manager.h
- (nm_named_manager_name_owner_changed,
nm_named_manager_dbus_connection_changed): fix for changes to
rewrite_resolv_conf()
- (compute_nameservers): don't need the NMNamedManager at all, remove
from parameter list
- (merge_one_ip4_config): new function; merge ip4 configs together
- (rewrite_resolv_conf): write out resolv.conf from all the stored
ip4 configs; the VPN config takes precedence, then the best
device config, then the rest of the configs
- (get_domain_for_config): take the NMNamedManager as an argument
to check whether the config is the VPN config
- (add_ip4_config_to_named): fixups for removal of the 'secondary'
attribute from ip4 configs
- (add_all_ip4_configs_to_named): add all the configs in priority order
- (remove_ip4_config_from_named): fix for changes to
get_domain_for_config()
- (nm_named_manager_add_ip4_config): assign the config to the right slot
based on its type; callers must pass in the type now
- (get_last_default_domain): remove, unused
- (nm_named_manager_remove_ip4_config): handle config slots correctly
* src/nm-device-802-11-wireless.c
- (real_can_activate): new function
- (real_get_best_auto_connection): renamed from real_get_best_connection
- (real_act_stage4_get_ip4_config): handle MTU override
* src/nm-device-802-3-ethernet.c
- (real_can_activate): new function
- (real_get_best_auto_connection): renamed from real_get_best_connection
- (real_act_stage4_get_ip4_config): new function; handle MTU override
* src/vpn-manager/nm-vpn-connection.c
- (nm_vpn_connection_ip4_config_get): don't need to set the 'secondary'
attribute on the ip4 config
* src/NetworkManagerPolicy.c
- (nm_policy_auto_get_best_device): remove
- (nm_policy_device_change_check): remove
- (update_default_route): new function; set the default route via
the specified device
- (get_device_priority): new function; return the priority number of
a device type WRT which one should have the default route. Order is
(highest to lowest) wired, wireless, GSM, CDMA.
- (update_routing_and_dns): new function; determine which device should
have the default route, then update the routing table and DNS
- (maybe_auto_activate_device): new function; if a device is now
available for activation, find out what connection it would like to
activate and do it
- (schedule_activate_check): new function; if a device can be activated
now, schedule the activation. Each device may have only one
pending activation at a given time.
- (device_state_changed): if activation was canceled, try again,
possibly with another connection; if the device was activated,
update routing and DNS; if the device was deactivated, try again
with another connection
- (device_carrier_changed): if there is no carrier, deactivate the
device; otherwise schedule an activation check for the device
- (wireless_networks_changed): schedule an activation check for the
device
- (device_added): keep track of the signal handler IDs so they can
be removed when the device goes away
- (device_removed): remove any signal handlers that might be attached
to the device; update routing and DNS
- (schedule_activate_all): new function
- (connections_added, connection_added, connection_updated): when
connections change, schedule all devices for an activation check
- (connection_removed): when a device is deactivated because its
connection was removed, schedule another activation check for it
- (nm_policy_destroy): destroy pending activations and disconnect
all device signal handlers
* src/nm-manager.c
- (nm_manager_activate_device): if the device was already actived,
deactivate it
- (deactivate_old_device): remove
- (connection_added_default_handler, impl_manager_activate_device):
don't deactivate other devices when activating this one
* src/backends/NetworkManagerGentoo.c
src/backends/NetworkManagerFrugalware.c
src/backends/NetworkManagerPaldo.c
src/backends/NetworkManagerRedHat.c
src/backends/NetworkManagerSlackware.c
src/backends/NetworkManagerArch.c
src/backends/NetworkManagerSuSE.c
src/backends/NetworkManagerDebian.c
- (nm_system_get_mtu): remove; MTU should be provided through the
distro's system settings service plugin instead
- (nm_system_device_add_default_route_via_device): remove
- (nm_system_device_add_default_route_via_device_with_iface): remove
- (nm_system_device_replace_default_route): new function; call
generic implementation
* src/backends/NetworkManagerGeneric.c
src/backends/NetworkManagerGeneric.h
- (nm_generic_device_add_default_route_via_device,
nm_generic_device_add_default_route_via_device_with_iface): remove
- (nm_generic_device_replace_default_route): replace the default route
with the given route via some gateway
* src/NetworkManagerSystem.c
src/NetworkManagerSystem.h
- (nm_system_device_set_from_ip4_config): let the policy handle updates
to routing and DNS; but set the MTU here
- (nm_system_vpn_device_set_from_ip4_config): set the route with the
ip_iface of the active device; use the standard MTU setting function
- (nm_system_set_mtu): remove
- (nm_system_device_set_mtu): consolidate MTU setting code in one place
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3391 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-hal-manager.c
- (nm_get_device_driver_name): use net.originating_device first, fall
back to physical device. HAL has deprecated physical_device.
* libnm-glib/nm-device.c
- (get_product_and_vendor): use net.originating_device first, fall
back to physical device. HAL has deprecated physical_device.
- (nm_device_update_description): s/physical_device_udi/orig_dev_udi
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3386 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-netlink.c
- (nm_netlink_get_default_handle): mistakenly removed too much code in
last commit; fix that
- (get_link_cache): print error string
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3385 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-netlink.c
- (nm_netlink_get_default_handle): NMNetlinkMonitor now uses libnl,
don't need this hack any more (Benoit Boissinot)
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3384 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerPolicy.c
- (nm_policy_device_change_check): ensure that a previously active
device with a system connection has a link before denying a switch
to a user connection
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3369 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device-802-11-wireless.c
- (link_timeout_cb): try again if scanning; deactivate the device when
activated if the link dies
- (supplicant_iface_connection_state_cb_handler): bump link timeout to
15 seconds
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3367 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device-802-11-wireless.c
src/nm-device-802-11-wireless.h
- (nm_device_802_11_wireless_reset_scan_interval): remove, unused
elsewhere; fold into the sole user in nm-device-802-11-wireless.c
- (device_cleanup): reset the scan interval lower when the device
deactivates
- (can_scan): base decision mostly off device state, not supplicant
interface state since the supplicant interface state isn't a
great indicator of whether the device is active or not
- (request_wireless_scan): clean up; schedule the next scan here
- (schedule_scan): only back the scan interval off if a new scan
actually gets scheduled; and make scan intervals tighter when the
device is disconnected
- (supplicant_iface_state_cb_handler): fold in the bits of
nm_device_802_11_wireless_reset_scan_interval() by resetting scan
interval to minimum
- (activation_success_handler): reset scan interval to something
reasonable
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3365 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Will Stephenson <wstephenson@kde.org>
* Makefile.am
configure.in
- Set up spec autogeneration infrastructure
* docs/NetworkManager DBUS API.txt
- Note how old this doc is and where to look for the canonical
D-Bus specification
* introspection/*
- Add annotations and comments
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3345 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device-802-11-wireless.c
- (device_cleanup): cleanup any association attempt that might be in
progress
- (nm_device_802_11_wireless_dispose): device_cleanup() already
destroys the AP list
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3344 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-util/nm-setting.c
- (nm_setting_compare): Fix C&P error from r3068 that caused settings
comparisons to always succeed; clarify assignment of values to
'different'
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3341 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
