The connection.mdns setting is a per-connection setting,
so one might expect that one activated device can only have
one MDNS setting at a time.
However, with certain VPN plugins (those that don't have their
own IP interface, like libreswan), the VPN configuration is merged
into the configuration of the device. So, in this case, there
might be multiple settings for one device that must be merged.
We already have a mechanism for that. It's NMIP4Config. Let NMIP4Config
track this piece of information. Although, stricitly speaking this
is not tied to IPv4, the alternative would be to introduce a new
object to track such data, which would be a tremendous effort
and more complicated then this.
Luckily, NMDnsManager and NMDnsPlugin are already equipped to
handle multiple NMIPConfig instances per device (IPv4 vs. IPv6,
and Device vs. VPN).
Also make "connection.mdns" configurable via global defaults in
NetworkManager.conf.
Even Gentoo disables this plugin since before 0.9.8 release
of NetworkManager. Time to say goodbye.
If somebody happens to show up to maintain it, we may resurrect it
later.
If "$distro_plugins=ifnet" was set, configure.ac would use that
to autodetect --with-hostname-persist=gentoo. Replace that autodetect
part by checking for /etc/gentoo-release file.
The number of authentication retires is useful also for passwords aside
802-1x settings. For example, src/devices/wifi/nm-device-wifi.c also has
a retry counter and uses a hard-coded value of 3.
Move the setting, so that it can be used in general. Although it is still
not implemented for other settings.
This is an API and ABI break.
We added "ipv4.route-table-sync" and "ipv6.route-table-sync" to not change
behavior for users that configured policy routing outside of NetworkManager,
for example, via a dispatcher script. Users had to explicitly opt-in
for NetworkManager to fully manage all routing tables.
These settings were awkward. Replace them with new settings "ipv4.route-table"
and "ipv6.route-table". Note that this commit breaks API/ABI on the unstable
development branch by removing recently added API.
As before, a connection will have no route-table set by default. This
has the meaning that policy-routing is not enabled and only the main table
will be fully synced. Once the user sets a table, we recognize that and
NetworkManager manages all routing tables.
The new route-table setting has other important uses: analog to
"ipv4.route-metric", it is the default that applies to all routes.
Currently it only works for static routes, not DHCP, SLAAC,
default-route, etc. That will be implemented later.
For static routes, each route still can explicitly set a table, and
overwrite the per-connection setting in "ipv4.route-table" and
"ipv6.route-table".
- clearify in the manual page that setting retry to 1 means to try
once, without retry.
- log the initially set retry value in nm_settings_connection_get_autoconnect_retries().
- use nm_settings_connection_get_autoconnect_retries() in
nm_settings_connection_can_autoconnect().
We already have various ways to mark a device as unmanaged.
1) via udev-rule ENV{NM_UNMANAGED}. This can be overwritten via D-Bus
at runtime.
2) via settings plugin. That is NM_CONTROLLED=no for ifcfg-rh and
keyfile.unmanaged-devices in NetworkManager.conf.
3) at runtime, via D-Bus. This is persisted in the run state file
and persists restarts (but not reboot).
This adds another way via NetworkManager.conf file. Note that the
existing keyfile.unmanaged-devices (above 2) is also a configuration
optin in NetworkManager.conf. However it has various downsides:
- it cannot be overwritten at runtime (see commit
c210134bd5).
- you can only explicitly mark a device as unmanaged. That means,
you cannot use it to manage a device which is unmanaged due to
a udev rule.
- the name "keyfile.*" sounds like it's only relevant for the keyfile settings
plugin. Nowadays the keyfile plugin is always loaded, so the option applies
to NetworkManager in general.
https://github.com/NetworkManager/NetworkManager/pull/29
We currently don't support marking a device a managed/unmanaged via
the [device] section. Eventually, I think we should, because the
existing "keyfile.unmanaged-devices" looks keyfile specific (which
it isn't). But more importantly, "keyfile.unmanaged-devices" sets the
unmanaged flag NM_UNMANAGED_USER_SETTINGS, which cannot be overruled
via D-Bus (see commit c210134bd5).
A device.managed flag would make sense for a more sensible way to
express configuration in NetworkManager.conf, which still can be
overwritten via D-Bus.
Anyway, it's not yet implemented. Fix the example.
- cleanup data type and use guint32 consistently. We might want to
introduce a new "infinity" value. But since libnm's
NM_SETTING_IP_CONFIG_DHCP_TIMEOUT asserts against the range
0 - G_MAXINT32, we cannot express it as -1 anyway. So, infinity
will have the numerical value G_MAXINT32, hence guint32 is just
fine.
- make use of existing ipv6.dhcp-timeout setting and add global
default configuration in NetworkManager.conf
- instead of having subclasses call nm_device_set_dhcp_timeout(),
add a virtual function get_dhcp_timeout().
For master devices, instead of ignoring loss of carrier entirely,
handle it.
First of all, master devices are now by default ignore-carrier=yes.
That means, without explict user configuration in NetworkManager.conf,
the previous behavior in carrier_changed() does not change.
If the user decides to configure the master device like
[device-with-carrier]
match-device=type:bond,type:bridge,type:team
ignore-carrier=no
then, master device will disconnect on carrier loss like
regular devices.
https://github.com/NetworkManager/NetworkManager/pull/18
Co-authored-by: Thomas Haller <thaller@redhat.com>
Since commit 2b51d3967 "device: merge branch 'th/device-mtu-bgo777251'",
we always set the MTU for certain device types during activation. Even
if the MTU is neither specified via the connection nor other means, like
DHCP.
Revert that change. On activation, if nothing explicitly configures the
MTU, leave it unchanged. This is like what we do with ethernet's
cloned-mac-address, which has a default value "preserve".
So, as last resort the default value for MTU is now 0 (don't change),
instead of depending on the device type.
Note that you also can override the default value in global
configuration via NetworkManager.conf.
This behavior makes sense, because whenever NM actively resets the MTU,
it remembers the previous value and restores it when deactivating
the connection. That wasn't implemented before 2b51d3967, and the
MTU would depend on which connection was previously active. That
is no longer an issue as the MTU gets reset when deactivating.
https://bugzilla.redhat.com/show_bug.cgi?id=1460760
Commits 39d0559d9a ("platform: sort links by name instead of
ifindex") and 529a0a1a7f ("manager: sort slaves to be autoconnected
by device name") changed the order of activation of slaves. Introduce
a system-wide configuration property to preserve the old behavior.
https://bugzilla.redhat.com/show_bug.cgi?id=1452585
Now that we have a PMF connection property, get rid of the previous
code to globally enable/disable PMF and use the 'ieee80211w'
configuration option for each configured network when the supplicant
supports it.
Otherwise, substitions are not properly expanded.
For example
- "AC_SUBST(nmrundir, '${runstatedir}'/$PACKAGE, [NetworkManager runtime state directory])"
gives ${runstatedir}/NetworkManager/resolv.conf
- "AC_SUBST(nmrundir, "${runstatedir}/$PACKAGE", [NetworkManager runtime state directory])"
gives ${prefix}/var/run/NetworkManager/resolv.conf
The purpose of "rc-manager=symlink" is so that the administrator can point
the "/etc/resolv.conf" as a symlink to a certain file, and thus indicating
that a certain component is responsible to manage resolv.conf, while others
should stay away from it.
For example, systemd-resolved never touches "/etc/resolv.conf", but
expects the admin to setup the symlink appropriately. It also recognizes
whether the symlink points to it's own resolv.conf in /run or to another
component.
Previously, "rc-manager=symlink" would always replace a regular file
with a symlink to "/var/run/NetworkManager/resolv.conf". Only if
"/etc/resolv.conf" is already a symlink somewhere else, NM would not
touch it. This with the exception that if "/etc/resolv.conf" points to
"/var/run/NetworkManager/resolv.conf", it would replace the symlink
with the same link to raise inotify events.
Change behavior so if "/etc/resolv.conf" is already a regular file, keep
it as file.
This means, if you have multiple components that don't care, everybody
can write the "/etc/resolv.conf" (as file) and there is no clear
expressed responsibility.
It was wrong that NetworkManager would convert the file to a symlink,
this should be reserved to the admin. Instead, NetworkManager should
accept that the intent is unspecified and preserve the regular file.
It's up to the admin to replace the symlink to somewhere else (to keep
NM off), or to point it to "/var/run/NetworkManager/resolv.conf", to show
the explicit intent.
The wrong behavior causes dangling symlinks when somebody disables
NetworkManager for good.
https://bugzilla.redhat.com/show_bug.cgi?id=1367551
This allows a user to restore the previous behavior where NetworkManager
would not reconfigure the MTU during device activation, if no MTU is
available (commit "22e8af6 device: set a per-device default MTU on
activation").
Well, not exactly. The previous behavior was to use per-connection
configuration, then DHCP provided value, or finally leave the MTU
unspecified.
Now, we prefer a per-connection configuration, followed by a global
connection default. If "ethernet.mtu=0", the MTU is left unspecified.
In absense of a global connection default, the value from DHCP is used
or finally a per-device-type default. That is effectively 1500 for most
types, except for infiniband where the MTU is still left unspecified.
Usecase: when connecting to a public Wi-Fi with MAC address randomization
("wifi.cloned-mac-address=random") you get on every re-connect a new
IP address due to the changing MAC address.
"wifi.cloned-mac-address=stable" is the solution for that. But that
means, every time when reconnecting to this network, the same ID will
be reused. We want an ID that is stable for a while, but at a later
point a new ID should e generated when revisiting the Wi-Fi network.
Extend the stable-id to become dynamic and support templates/substitutions.
Currently supported is "${CONNECTION}", "${BOOT}" and "${RANDOM}".
Any unrecognized pattern is treated verbaim/untranslated.
"$$" is treated special to allow escaping the '$' character. This allows
the user to still embed verbatim '$' characters with the guarantee that
future versions of NetworkManager will still generate the same ID.
Of course, a user could just avoid '$' in the stable-id unless using
it for dynamic substitutions.
Later we might want to add more recognized substitutions. For example, it
could be useful to generate new IDs based on the current time. The ${} syntax
is extendable to support arguments like "${PERIODIC:weekly}".
Also allow "connection.stable-id" to be set as global default value.
Previously that made no sense because the stable-id was static
and is anyway strongly tied to the identity of the connection profile.
Now, with dynamic stable-ids it gets much more useful to specify
a global default.
Note that pre-existing stable-ids don't change and still generate
the same addresses -- unless they contain one of the new ${} patterns.
