* Add Modbus cover
* Fix improper commands written for Modbus cover via coil
* Make changes per review comments
* Fix default hub not defined
Since support for multiple hubs was added, the default hub option
was not implemented correctly. Now I added necessary logic to make
it work. First hub in a list will be used as a default hub.
* Move Cover config under Modbus section
* Revert setting up a default hub alias
* Make hub mandatory for Cover
* Add default scan interval
* Read scan_interval from discovery info
* Fix linter error
* Use default scan interval from Cover platform
* Handle polling for Modbus cover directly inside entity
* Move covers under hub config
* Fix for review comment
* Call update() from Cover actuator methods
* Fix time validation
* Scaffold
* Added the en translation
* Modified the name
* Basic functionality for config flow.
* Pulled in enough to validate config flow works.
* Update manifest.json
* initial data polling (water and air temp sensors)
* Adding sensors, debugging update function
* polling updates working
* support for new data format from library
* Updated entity_id, friendly name, conversion for ppm, attributes for hayward display units, MSPSystemID and component systemID
* Fixed errors for PR
* clean up
* Add login exc, check if configured, test login.
* Remove debug print.
* Black formatting, ran isort, update requirements.
* Updated w isort. fix flake8 failures.
* Fix flake8 errors
* Fixed self.attrs to remove invalid self._ values - small change
* Missed on small change - fixing attributes
* Updated naming, updated unit of measure, updated icon, bumped omnilog…
* Updated to fix flake8 issues in __init__.py and config_flow.py
* Updated test_config_flow.py to pass, updated config_flow.py to correct errors in test
* Remove comments in preparation for PR
* update .covezragerc
* Formatting fix
* Rewrote sensors to dynamically add all BOWs, pumps, clorinators. Still to do - add CSAD sensors.
* Rewrote sensors to dynamically add all BOWs, pumps, clorinators. Still to do - add CSAD sensors.
* Added CSAD sensors for pools that have them.
* Added CSAD sensors for pools that have them.
* Fixed CSAD to not create if blank or don't exist, removed broad except usage to pass linting.
* Updated entity naming convention. Fixed linting issues.
* Added device association to the back yard / omnilogic system
* Removed .0 from ppm values when returning imperial values for salt sensor
* Updated to return state = None for water temp when pump is off, handled Chlorinator operatingMode = 2, and added PlatformNotReady check
* Corrected exception from Omnilogic library
* Bumped omnilogic to 0.3.7. Added alarm sensor/data to sensors. Handle pump off condition for ph and orp sensors.
* Bumped omnilogic to 0.3.7. Added alarm sensor/data to sensors. Handle pump off condition for ph and orp sensors.
* Bumped omnilogic to 0.3.7. Added alarm sensor/data to sensors. Handle pump off condition for ph and orp sensors.
* Removed nested_lookup dependency, bumped omnilogic.py to 0.3.8.
* Fixed lint error
* Added logging for sensor creation.
* Fixed linting errors with logging.
* Fixed explicit chaining of raised error. Fixed issue with alarm sensor.
* Fixed manifest.json based on feedback.
* Fixed self.attrs, should_poll, CoordinatorEntity, SCAN_INTERVAL from comments in PR.
* Addressed unique_id, moved data update coordinator, addressed minor other issues from testing
* Created main OmniLogic entity for common items, reworked DataUpdateCoordinator to it's own class.
* Addressed config_schema not used in __init__.py
* Fixed linting issues.
* Addressed several comments, still todo - separate sensor classes.
* Split the Omnilogic Sensors into separate logical classes for simpler logic.
* Fixed snake case lint error for AddAlarms (to add_alarms)
* Addressed config_flow issues from comments.
* Changed addressed ConfigNotReady issue from comments.
* Updated strings.json and generated corrected en.json with translations.
* Updated en.json to standard generated file.
* Added config_flow tests and updated issue with config_flow on cannot_connect
* Added test case for incomplete information entered.
* Compressed logic in the sensor classes to reduce duplication.
* Updated strings.json for polling_interval, added generic exception handling on config flow.
* Removed omnilogic from the .coveragerc omit file.
* Updated test_config_flow to follow recommended pattern.
* Excluded sensor.py from test coverage tests.
* Corected minor issues in test_config_flow from comments
* Fixed linting issues on last commits
* Fixed linting issues.
* Corrected issue when temp state is not available from Omnilogic
* Added omnililogic_common.py from .coveragerc to bypass test coverage check.
* Return false on Login Exception, handle OmniLogicException in config_flow and in tests.
* Handle all exceptions and in config_flow and tests, clarified test naming.
* Broke out test cases per comments.
* Regenerated en.json file.
* Addressed changes from comments in PR.
* Added session and bumped API to 0.4.0, addressed other comments from PR.
* Addressed entitydata (missed earlier).
* Fixed pylint issue
* Added test case for options flow in test_config_flow.py
* Removed super() and used self when calling methods in current class.
* Addressed comments in PR.
* Addressed comments in PR.
* Updated translations file.
* Rewrote data coordinator to output dict for easy searching.
* Updated chlorinator unit when chlorinator is on/off only
* Scaffold
* Added the en translation
* Modified the name
* Basic functionality for config flow.
* Pulled in enough to validate config flow works.
* Update manifest.json
* initial data polling (water and air temp sensors)
* Adding sensors, debugging update function
* polling updates working
* support for new data format from library
* Updated entity_id, friendly name, conversion for ppm, attributes for hayward display units, MSPSystemID and component systemID
* Fixed errors for PR
* clean up
* Add login exc, check if configured, test login.
* Remove debug print.
* Black formatting, ran isort, update requirements.
* Updated w isort. fix flake8 failures.
* Fix flake8 errors
* Fixed self.attrs to remove invalid self._ values - small change
* Missed on small change - fixing attributes
* Updated naming, updated unit of measure, updated icon, bumped omnilog…
* Updated to fix flake8 issues in __init__.py and config_flow.py
* Updated test_config_flow.py to pass, updated config_flow.py to correct errors in test
* Remove comments in preparation for PR
* update .covezragerc
* Formatting fix
* Rewrote sensors to dynamically add all BOWs, pumps, clorinators. Still to do - add CSAD sensors.
* Rewrote sensors to dynamically add all BOWs, pumps, clorinators. Still to do - add CSAD sensors.
* Added CSAD sensors for pools that have them.
* Added CSAD sensors for pools that have them.
* Fixed CSAD to not create if blank or don't exist, removed broad except usage to pass linting.
* Updated entity naming convention. Fixed linting issues.
* Added device association to the back yard / omnilogic system
* Removed .0 from ppm values when returning imperial values for salt sensor
* Updated to return state = None for water temp when pump is off, handled Chlorinator operatingMode = 2, and added PlatformNotReady check
* Corrected exception from Omnilogic library
* Bumped omnilogic to 0.3.7. Added alarm sensor/data to sensors. Handle pump off condition for ph and orp sensors.
* Bumped omnilogic to 0.3.7. Added alarm sensor/data to sensors. Handle pump off condition for ph and orp sensors.
* Bumped omnilogic to 0.3.7. Added alarm sensor/data to sensors. Handle pump off condition for ph and orp sensors.
* Removed nested_lookup dependency, bumped omnilogic.py to 0.3.8.
* Fixed lint error
* Added logging for sensor creation.
* Fixed linting errors with logging.
* Fixed explicit chaining of raised error. Fixed issue with alarm sensor.
* Fixed manifest.json based on feedback.
* Fixed self.attrs, should_poll, CoordinatorEntity, SCAN_INTERVAL from comments in PR.
* Addressed unique_id, moved data update coordinator, addressed minor other issues from testing
* Created main OmniLogic entity for common items, reworked DataUpdateCoordinator to it's own class.
* Addressed config_schema not used in __init__.py
* Fixed linting issues.
* Addressed several comments, still todo - separate sensor classes.
* Split the Omnilogic Sensors into separate logical classes for simpler logic.
* Fixed snake case lint error for AddAlarms (to add_alarms)
* Addressed config_flow issues from comments.
* Changed addressed ConfigNotReady issue from comments.
* Updated strings.json and generated corrected en.json with translations.
* Updated en.json to standard generated file.
* Added config_flow tests and updated issue with config_flow on cannot_connect
* Added test case for incomplete information entered.
* Compressed logic in the sensor classes to reduce duplication.
* Updated strings.json for polling_interval, added generic exception handling on config flow.
* Removed omnilogic from the .coveragerc omit file.
* Updated test_config_flow to follow recommended pattern.
* Excluded sensor.py from test coverage tests.
* Corected minor issues in test_config_flow from comments
* Fixed linting issues on last commits
* Fixed linting issues.
* Corrected issue when temp state is not available from Omnilogic
* Added omnililogic_common.py from .coveragerc to bypass test coverage check.
* Return false on Login Exception, handle OmniLogicException in config_flow and in tests.
* Handle all exceptions and in config_flow and tests, clarified test naming.
* Broke out test cases per comments.
* Regenerated en.json file.
* Addressed changes from comments in PR.
* Added session and bumped API to 0.4.0, addressed other comments from PR.
* Addressed entitydata (missed earlier).
* Fixed pylint issue
* Added test case for options flow in test_config_flow.py
* Removed super() and used self when calling methods in current class.
* Addressed comments in PR.
* Addressed comments in PR.
* Updated translations file.
* Rewrote data coordinator to output dict for easy searching.
* Updated chlorinator unit when chlorinator is on/off only
* Fixed ORP method not being @property, fixed unique_id potential issue. Does not address comments from PR.
* Rewrote coordinator for updated dict structure, rewrote sensors to parse new data structure.
* Added alarms as attributes on all entities which support alarm reporting.
* Updated SENSOR_TYPES to sensor_types to adhere to snake case in pylint.
* Addressed PR comments.
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Removed binary sensor conditions (alarms, on/off sensor types) and added ability for multiple guard conditions
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Updated per comments in PR for Pump Type and removal of force_update().
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/common.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Correctly asserting conditions for the login exception case.
* Update .coveragerc
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Mike Hershberger <mike.hershberger@gmail.com>
Co-authored-by: Chad <54695185+chadlyy@users.noreply.github.com>
Co-authored-by: Tim Empringham <tim.empringham@live.ca>
Co-authored-by: djtimca <60706061+djtimca@users.noreply.github.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Implement local media finder and integrate into cast
* update to media source as a platform
* Tweak media source design
* fix websocket and local source
* fix websocket schema
* fix playing media
* Apply suggestions from code review
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add resolve_media websocket
* Register that shit
* Square brackets
* Sign path
* add support for multiple media sources and address PR review
* fix lint
* fix tests from auto whitelisting config/media
* allow specifying a name on the media source
* add tests
* fix for python 3.7
* Apply suggestions from code review
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* add http back to cast and remove guess_type from executor as there is no i/o
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Opened a new fresh page to clean my mess.
* Solved pylint warnings
* Fixing pylint issue of defining attr outside init.
* Excluded files from being tested by codecov.
* Solved binary sensor error.
* Fixed some stylisation errors.
* Resolved input not updating problem.
* Added port entry to test file.
* Added tests for create_entry.
* Added support for better state management.
* Increased code coverage of config_flow.py & made some tweaks.
* Increased coverage of config_flow.py by adding tests for unknown exceptions.
* A small bugfix.
* Stylised code as per Chris' suggestions.
* Stylised code again.
* Improved quality of test code.
* Added step_id in config flow tests.
* Run scaffold script
* Update version
* Bump version
* Initial commit
* Move meter and ESIID to device attributes
* Update internal to hourly due to api limit
* Format with Black
* Fix typo
* Update tests
* Update description
* Disable Pylint error
* Don't commit translations
* Remove meter number from sensor name
* Allow multiple meters per account
* Move data updates to a DataUpdateCoordinator
* Use setdefault to setup the component
* Move strings to const.py
* Fix tests
* Remove meter last updated attribute
* Bump smart-meter-texas version
* Fix logger call
Co-authored-by: J. Nick Koston <nick@koston.org>
* Remove unneeded manifest keys
Co-authored-by: J. Nick Koston <nick@koston.org>
* Remove icon property
Co-authored-by: J. Nick Koston <nick@koston.org>
* Handle instance where user already setup an account
Co-authored-by: J. Nick Koston <nick@koston.org>
* Remove icon constant
* Fix indentation
* Handle config flow errors better
* Use ESIID + meter number as unique ID for sensor
* Update config flow tests to reach 100% coverage
* Avoid reading meters on startup
Cherrypick @bdraco's suggestion
* Run scaffold script
* Update version
* Bump version
* Initial commit
* Move meter and ESIID to device attributes
* Update internal to hourly due to api limit
* Format with Black
* Fix typo
* Update tests
* Update description
* Disable Pylint error
* Don't commit translations
* Remove meter number from sensor name
* Allow multiple meters per account
* Move data updates to a DataUpdateCoordinator
* Use setdefault to setup the component
* Move strings to const.py
* Fix tests
* Remove meter last updated attribute
* Bump smart-meter-texas version
* Fix logger call
Co-authored-by: J. Nick Koston <nick@koston.org>
* Remove unneeded manifest keys
Co-authored-by: J. Nick Koston <nick@koston.org>
* Remove icon property
Co-authored-by: J. Nick Koston <nick@koston.org>
* Handle instance where user already setup an account
Co-authored-by: J. Nick Koston <nick@koston.org>
* Remove icon constant
* Fix indentation
* Handle config flow errors better
* Use ESIID + meter number as unique ID for sensor
* Update config flow tests to reach 100% coverage
* Remove unnecessary try/except block
This checks for the same exception just prior in execution on L51.
* Remove unused return values
* Add tests
* Improve tests and coverage
* Use more pythonic control flow
* Remove all uses of hass.data
Co-authored-by: J. Nick Koston <nick@koston.org>
* Move DwdWeatherWarningsAPI to a library hosted on PyPI
PyPI library uses new DWD WFS API
WFS API allows a more detailed query with reduced data sent as return
Change CONF_REGION_NAME from Optional to Required because it was never really optional
Set attribute region_state to "N/A" because it is not available via the new API
Add attributes warning_i_parameters and warning_i_color
* Use constants instead of raw strings
Streamline methods state and device_state_attributes
* Wrap api, use UTC time
* Update homeassistant/components/dwd_weather_warnings/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/dwd_weather_warnings/manifest.json
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
