rust/Makefile.in
2014-02-13 12:54:17 -08:00

601 lines
19 KiB
Makefile

# Copyright 2012 The Rust Project Developers. See the COPYRIGHT
# file at the top-level directory of this distribution and at
# http://rust-lang.org/COPYRIGHT.
#
# Licensed under the Apache License, Version 2.0 <LICENSE-APACHE or
# http://www.apache.org/licenses/LICENSE-2.0> or the MIT license
# <LICENSE-MIT or http://opensource.org/licenses/MIT>, at your
# option. This file may not be copied, modified, or distributed
# except according to those terms.
# An explanation of how the build is structured:
#
# There are multiple build stages (0-3) needed to verify that the
# compiler is properly self-hosting. Each stage is divided between
# 'host' artifacts and 'target' artifacts, where the stageN host
# compiler builds artifacts for 1 or more stageN target architectures.
# Once the stageN target compiler has been built for the host
# architecture it is promoted (copied) to a stageN+1 host artifact.
#
# The stage3 host compiler is a compiler that successfully builds
# itself and should (in theory) be bitwise identical to the stage2
# host compiler. The process is bootstrapped using a stage0 host
# compiler downloaded from a previous snapshot.
#
# At no time should stageN artifacts be interacting with artifacts
# from other stages. For consistency, we use the 'promotion' logic
# for all artifacts, even those that don't make sense on non-host
# architectures.
#
# The directory layout for a stage is intended to match the layout
# of the installed compiler, and looks like the following:
#
# stageN - this is the system root, corresponding to, e.g. /usr
# bin - binaries compiled for the host
# lib - libraries used by the host compiler
# rustlib - rustc's own place to organize libraries
# $(target) - target-specific artifacts
# bin - binaries for target architectures
# lib - libraries for target architectures
#
# A note about host libraries:
#
# The only libraries that get promoted to stageN/lib are those needed
# by rustc. In general, rust programs, even those compiled for the
# host architecture will use libraries from the target
# directories. This gives rust some freedom to experiment with how
# libraries are managed and versioned without polluting the common
# areas of the filesystem.
#
# General rust binaries may stil live in the host bin directory; they
# will just link against the libraries in the target lib directory.
#
# Admittedly this is a little convoluted.
STAGES = 0 1 2 3
######################################################################
# Residual auto-configuration
######################################################################
# Recursive wildcard function
# http://blog.jgc.org/2011/07/gnu-make-recursive-wildcard-function.html
rwildcard=$(foreach d,$(wildcard $1*),$(call rwildcard,$d/,$2) \
$(filter $(subst *,%,$2),$d))
include config.mk
# We track all of the object files we might build so that we can find
# and include all of the .d files in one fell swoop.
ALL_OBJ_FILES :=
MKFILE_DEPS := config.stamp $(call rwildcard,$(CFG_SRC_DIR)mk/,*)
NON_BUILD_HOST = $(filter-out $(CFG_BUILD),$(CFG_HOST))
NON_BUILD_TARGET = $(filter-out $(CFG_BUILD),$(CFG_TARGET))
ifneq ($(MAKE_RESTARTS),)
CFG_INFO := $(info cfg: make restarts: $(MAKE_RESTARTS))
endif
CFG_INFO := $(info cfg: build triple $(CFG_BUILD))
CFG_INFO := $(info cfg: host triples $(CFG_HOST))
CFG_INFO := $(info cfg: target triples $(CFG_TARGET))
ifneq ($(wildcard $(NON_BUILD_HOST)),)
CFG_INFO := $(info cfg: non-build host triples $(NON_BUILD_HOST))
endif
ifneq ($(wildcard $(NON_BUILD_TARGET)),)
CFG_INFO := $(info cfg: non-build target triples $(NON_BUILD_TARGET))
endif
CFG_RUSTC_FLAGS := $(RUSTFLAGS)
CFG_GCCISH_CFLAGS :=
CFG_GCCISH_LINK_FLAGS :=
ifdef CFG_DISABLE_OPTIMIZE
$(info cfg: disabling rustc optimization (CFG_DISABLE_OPTIMIZE))
CFG_RUSTC_FLAGS +=
else
# The rtopt cfg turns off runtime sanity checks
CFG_RUSTC_FLAGS += -O --cfg rtopt
endif
ifdef CFG_DISABLE_DEBUG
CFG_RUSTC_FLAGS += --cfg ndebug
CFG_GCCISH_CFLAGS += -DRUST_NDEBUG
else
$(info cfg: enabling more debugging (CFG_ENABLE_DEBUG))
CFG_RUSTC_FLAGS += --cfg debug
CFG_GCCISH_CFLAGS += -DRUST_DEBUG
endif
ifdef SAVE_TEMPS
CFG_RUSTC_FLAGS += --save-temps
endif
ifdef ASM_COMMENTS
CFG_RUSTC_FLAGS += -Z asm-comments
endif
ifdef TIME_PASSES
CFG_RUSTC_FLAGS += -Z time-passes
endif
ifdef TIME_LLVM_PASSES
CFG_RUSTC_FLAGS += -Z time-llvm-passes
endif
ifdef TRACE
CFG_RUSTC_FLAGS += -Z trace
endif
ifdef CFG_DISABLE_RPATH
CFG_RUSTC_FLAGS += -C no-rpath
endif
# The executables crated during this compilation process have no need to include
# static copies of libstd and libextra. We also generate dynamic versions of all
# libraries, so in the interest of space, prefer dynamic linking throughout the
# compilation process.
#
# Note though that these flags are omitted for stage2+. This means that the
# snapshot will be generated with a statically linked rustc so we only have to
# worry about the distribution of one file (with its native dynamic
# dependencies)
RUSTFLAGS_STAGE0 += -C prefer-dynamic
RUSTFLAGS_STAGE1 += -C prefer-dynamic
# platform-specific auto-configuration
include $(CFG_SRC_DIR)mk/platform.mk
# Run the stage1/2 compilers under valgrind
ifdef VALGRIND_COMPILE
CFG_VALGRIND_COMPILE :=$(CFG_VALGRIND)
else
CFG_VALGRIND_COMPILE :=
endif
# version-string calculation
CFG_GIT_DIR := $(CFG_SRC_DIR).git
CFG_RELEASE = 0.10-pre
CFG_VERSION = $(CFG_RELEASE)
# windows exe's need numeric versions - don't use anything but
# numbers and dots here
CFG_VERSION_WIN = 0.10
# since $(CFG_GIT) may contain spaces (especially on Windows),
# we need to escape them. (" " to r"\ ")
# Note that $(subst ...) ignores space after `subst`,
# so we use a hack: define $(SPACE) which contains space character.
SPACE :=
SPACE +=
ifneq ($(wildcard $(subst $(SPACE),\$(SPACE),$(CFG_GIT))),)
ifneq ($(wildcard $(subst $(SPACE),\$(SPACE),$(CFG_GIT_DIR))),)
CFG_VERSION += $(shell git --git-dir='$(CFG_GIT_DIR)' log -1 \
--pretty=format:'(%h %ci)')
CFG_VER_HASH = $(shell git --git-dir='$(CFG_GIT_DIR)' rev-parse HEAD)
endif
endif
ifdef CFG_ENABLE_VALGRIND
$(info cfg: enabling valgrind (CFG_ENABLE_VALGRIND))
else
CFG_VALGRIND :=
endif
ifdef CFG_BAD_VALGRIND
$(info cfg: disabling valgrind due to its unreliability on this platform)
CFG_VALGRIND :=
endif
######################################################################
# Target-and-rule "utility variables"
######################################################################
ifdef VERBOSE
Q :=
E =
else
Q := @
E = echo $(1)
endif
S := $(CFG_SRC_DIR)
define DEF_X
X_$(1) := $(CFG_EXE_SUFFIX_$(1))
endef
$(foreach target,$(CFG_TARGET),\
$(eval $(call DEF_X,$(target))))
# "Source" files we generate in builddir along the way.
GENERATED :=
# Delete the built-in rules.
.SUFFIXES:
%:: %,v
%:: RCS/%,v
%:: RCS/%
%:: s.%
%:: SCCS/s.%
######################################################################
# Cleaning out old crates
######################################################################
# $(1) is the path for directory to match against
# $(2) is the glob to use in the match
#
# Note that a common bug is to accidentally construct the glob denoted
# by $(2) with a space character prefix, which invalidates the
# construction $(1)$(2).
define CHECK_FOR_OLD_GLOB_MATCHES
$(Q)MATCHES="$(wildcard $(1))"; if [ -n "$$MATCHES" ] ; then echo "warning: there are previous" \'$(notdir $(2))\' "libraries:" $$MATCHES; fi
endef
# Same interface as above, but deletes rather than just listing the files.
ifdef VERBOSE
define REMOVE_ALL_OLD_GLOB_MATCHES
$(Q)MATCHES="$(wildcard $(1))"; if [ -n "$$MATCHES" ] ; then echo "warning: removing previous" \'$(notdir $(1))\' "libraries:" $$MATCHES; rm $$MATCHES ; fi
endef
else
define REMOVE_ALL_OLD_GLOB_MATCHES
$(Q)MATCHES="$(wildcard $(1))"; if [ -n "$$MATCHES" ] ; then rm $$MATCHES ; fi
endef
endif
# We use a different strategy for LIST_ALL_OLD_GLOB_MATCHES_EXCEPT
# than in the macros above because it needs the result of running the
# `ls` command after other rules in the command list have run; the
# macro-expander for $(wildcard ...) would deliver its results too
# soon. (This is in contrast to the macros above, which are meant to
# be run at the outset of a command list in a rule.)
ifdef VERBOSE
define LIST_ALL_OLD_GLOB_MATCHES
@echo "info: now are following matches for" '$(notdir $(1))' "libraries:"
@( ls $(1) 2>/dev/null || true )
endef
else
define LIST_ALL_OLD_GLOB_MATCHES
endef
endif
######################################################################
# LLVM macros
######################################################################
# FIXME: x86-ism
LLVM_COMPONENTS=x86 arm mips ipo bitreader bitwriter linker asmparser jit mcjit \
interpreter instrumentation
# Only build these LLVM tools
LLVM_TOOLS=bugpoint llc llvm-ar llvm-as llvm-dis llvm-mc opt llvm-extract
define DEF_LLVM_VARS
# The configure script defines these variables with the target triples
# separated by Z. This defines new ones with the expected format.
CFG_LLVM_BUILD_DIR_$(1):=$$(CFG_LLVM_BUILD_DIR_$(subst -,_,$(1)))
CFG_LLVM_INST_DIR_$(1):=$$(CFG_LLVM_INST_DIR_$(subst -,_,$(1)))
# Any rules that depend on LLVM should depend on LLVM_CONFIG
LLVM_CONFIG_$(1):=$$(CFG_LLVM_INST_DIR_$(1))/bin/llvm-config$$(X_$(1))
LLVM_MC_$(1):=$$(CFG_LLVM_INST_DIR_$(1))/bin/llvm-mc$$(X_$(1))
LLVM_VERSION_$(1)=$$(shell "$$(LLVM_CONFIG_$(1))" --version)
LLVM_BINDIR_$(1)=$$(shell "$$(LLVM_CONFIG_$(1))" --bindir)
LLVM_INCDIR_$(1)=$$(shell "$$(LLVM_CONFIG_$(1))" --includedir)
LLVM_LIBDIR_$(1)=$$(shell "$$(LLVM_CONFIG_$(1))" --libdir)
LLVM_LIBS_$(1)=$$(shell "$$(LLVM_CONFIG_$(1))" --libs $$(LLVM_COMPONENTS))
LLVM_LDFLAGS_$(1)=$$(shell "$$(LLVM_CONFIG_$(1))" --ldflags)
# On FreeBSD, it may search wrong headers (that are for pre-installed LLVM),
# so we replace -I with -iquote to ensure that it searches bundled LLVM first.
LLVM_CXXFLAGS_$(1)=$$(subst -I, -iquote , $$(shell "$$(LLVM_CONFIG_$(1))" --cxxflags))
LLVM_HOST_TRIPLE_$(1)=$$(shell "$$(LLVM_CONFIG_$(1))" --host-target)
LLVM_AS_$(1)=$$(CFG_LLVM_INST_DIR_$(1))/bin/llvm-as$$(X_$(1))
LLC_$(1)=$$(CFG_LLVM_INST_DIR_$(1))/bin/llc$$(X_$(1))
endef
$(foreach host,$(CFG_HOST), \
$(eval $(call DEF_LLVM_VARS,$(host))))
######################################################################
# Exports for sub-utilities
######################################################################
# Note that any variable that re-configure should pick up needs to be
# exported
export CFG_SRC_DIR
export CFG_BUILD_DIR
export CFG_VERSION
export CFG_VERSION_WIN
export CFG_RELEASE
export CFG_BUILD
export CFG_LLVM_ROOT
export CFG_ENABLE_MINGW_CROSS
export CFG_PREFIX
export CFG_LIBDIR
export CFG_RUSTLIBDIR
export CFG_LIBDIR_RELATIVE
export CFG_DISABLE_INJECT_STD_VERSION
######################################################################
# Per-stage targets and runner
######################################################################
include $(CFG_SRC_DIR)mk/crates.mk
define SREQ
# $(1) is the stage number
# $(2) is the target triple
# $(3) is the host triple
# Destinations of artifacts for the host compiler
HROOT$(1)_H_$(3) = $(3)/stage$(1)
HBIN$(1)_H_$(3) = $$(HROOT$(1)_H_$(3))/bin
HLIB$(1)_H_$(3) = $$(HROOT$(1)_H_$(3))/$$(CFG_LIBDIR_RELATIVE)
# Destinations of artifacts for target architectures
TROOT$(1)_T_$(2)_H_$(3) = $$(HLIB$(1)_H_$(3))/$$(CFG_RUSTLIBDIR)/$(2)
TBIN$(1)_T_$(2)_H_$(3) = $$(TROOT$(1)_T_$(2)_H_$(3))/bin
TLIB$(1)_T_$(2)_H_$(3) = $$(TROOT$(1)_T_$(2)_H_$(3))/lib
# Preqrequisites for using the stageN compiler
ifeq ($(1),0)
HSREQ$(1)_H_$(3) = $$(HBIN$(1)_H_$(3))/rustc$$(X_$(3))
else
HSREQ$(1)_H_$(3) = \
$$(HBIN$(1)_H_$(3))/rustc$$(X_$(3)) \
$$(HLIB$(1)_H_$(3))/stamp.rustc \
$$(foreach dep,$$(RUST_DEPS_rustc),$$(HLIB$(1)_H_$(3))/stamp.$$(dep)) \
$$(MKFILE_DEPS)
endif
# Prerequisites for using the stageN compiler to build target artifacts
TSREQ$(1)_T_$(2)_H_$(3) = \
$$(HSREQ$(1)_H_$(3)) \
$$(TLIB$(1)_T_$(2)_H_$(3))/libmorestack.a \
$$(TLIB$(1)_T_$(2)_H_$(3))/libcompiler-rt.a
# Prerequisites for a working stageN compiler and libraries, for a specific
# target
SREQ$(1)_T_$(2)_H_$(3) = \
$$(TSREQ$(1)_T_$(2)_H_$(3)) \
$$(foreach dep,$$(TARGET_CRATES),\
$$(TLIB$(1)_T_$(2)_H_$(3))/stamp.$$(dep))
# Prerequisites for a working stageN compiler and complete set of target
# libraries
CSREQ$(1)_T_$(2)_H_$(3) = \
$$(TSREQ$(1)_T_$(2)_H_$(3)) \
$$(HBIN$(1)_H_$(3))/rustdoc$$(X_$(3)) \
$$(foreach dep,$$(CRATES),$$(TLIB$(1)_T_$(2)_H_$(3))/stamp.$$(dep)) \
$$(foreach dep,$$(HOST_CRATES),$$(HLIB$(1)_H_$(3))/stamp.$$(dep))
ifeq ($(1),0)
# Don't run the the stage0 compiler under valgrind - that ship has sailed
CFG_VALGRIND_COMPILE$(1) =
else
CFG_VALGRIND_COMPILE$(1) = $$(CFG_VALGRIND_COMPILE)
endif
# Add RUSTFLAGS_STAGEN values to the build command
EXTRAFLAGS_STAGE$(1) = $$(RUSTFLAGS_STAGE$(1))
CFGFLAG$(1)_T_$(2)_H_$(3) = stage$(1)
# Pass --cfg stage0 only for the build->host part of stage0;
# if you're building a cross config, the host->* parts are
# effectively stage1, since it uses the just-built stage0.
ifeq ($(1),0)
ifneq ($(strip $(CFG_BUILD)),$(strip $(3)))
CFGFLAG$(1)_T_$(2)_H_$(3) = stage1
endif
endif
ifdef CFG_DISABLE_RPATH
ifeq ($$(OSTYPE_$(3)),apple-darwin)
RPATH_VAR$(1)_T_$(2)_H_$(3) := \
DYLD_LIBRARY_PATH="$$$$DYLD_LIBRARY_PATH:$$(HLIB$(1)_H_$(3))"
else
RPATH_VAR$(1)_T_$(2)_H_$(3) := \
LD_LIBRARY_PATH="$$$$LD_LIBRARY_PATH:$$(HLIB$(1)_H_$(3))"
endif
else
RPATH_VAR$(1)_T_$(2)_H_$(3) :=
endif
STAGE$(1)_T_$(2)_H_$(3) := \
$$(Q)$$(RPATH_VAR$(1)_T_$(2)_H_$(3)) \
$$(call CFG_RUN_TARG_$(3),$(1), \
$$(CFG_VALGRIND_COMPILE$(1)) \
$$(HBIN$(1)_H_$(3))/rustc$$(X_$(3)) \
--cfg $$(CFGFLAG$(1)_T_$(2)_H_$(3)) \
$$(CFG_RUSTC_FLAGS) $$(EXTRAFLAGS_STAGE$(1)) --target=$(2)) \
$$(RUSTC_FLAGS_$(2))
PERF_STAGE$(1)_T_$(2)_H_$(3) := \
$$(Q)$$(call CFG_RUN_TARG_$(3),$(1), \
$$(CFG_PERF_TOOL) \
$$(HBIN$(1)_H_$(3))/rustc$$(X_$(3)) \
--cfg $$(CFGFLAG$(1)_T_$(2)_H_$(3)) \
$$(CFG_RUSTC_FLAGS) $$(EXTRAFLAGS_STAGE$(1)) --target=$(2)) \
$$(RUSTC_FLAGS_$(2))
endef
$(foreach build,$(CFG_HOST), \
$(eval $(foreach target,$(CFG_TARGET), \
$(eval $(foreach stage,$(STAGES), \
$(eval $(call SREQ,$(stage),$(target),$(build))))))))
######################################################################
# rustc-H-targets
#
# Builds a functional Rustc for the given host.
######################################################################
define DEF_RUSTC_STAGE_TARGET
# $(1) == architecture
# $(2) == stage
rustc-stage$(2)-H-$(1): \
$$(foreach target,$$(CFG_TARGET),$$(SREQ$(2)_T_$$(target)_H_$(1)))
endef
$(foreach host,$(CFG_HOST), \
$(eval $(foreach stage,1 2 3, \
$(eval $(call DEF_RUSTC_STAGE_TARGET,$(host),$(stage))))))
rustc-stage1: rustc-stage1-H-$(CFG_BUILD)
rustc-stage2: rustc-stage2-H-$(CFG_BUILD)
rustc-stage3: rustc-stage3-H-$(CFG_BUILD)
define DEF_RUSTC_TARGET
# $(1) == architecture
rustc-H-$(1): rustc-stage2-H-$(1)
endef
$(foreach host,$(CFG_TARGET), \
$(eval $(call DEF_RUSTC_TARGET,$(host))))
rustc-stage1: rustc-stage1-H-$(CFG_BUILD)
rustc-stage2: rustc-stage2-H-$(CFG_BUILD)
rustc-stage3: rustc-stage3-H-$(CFG_BUILD)
rustc: rustc-H-$(CFG_BUILD)
rustc-H-all: $(foreach host,$(CFG_HOST),rustc-H-$(host))
######################################################################
# Entrypoint rule
######################################################################
.DEFAULT_GOAL := all
ifneq ($(CFG_IN_TRANSITION),)
CFG_INFO := $(info cfg:)
CFG_INFO := $(info cfg: *** compiler is in snapshot transition ***)
CFG_INFO := $(info cfg: *** stage2 and later will not be built ***)
CFG_INFO := $(info cfg:)
#FIXME This is surely busted
all: $(SREQ1$(CFG_BUILD)) $(GENERATED) docs
else
define ALL_TARGET_N
ifneq ($$(findstring $(1),$$(CFG_HOST)),)
# This is a host
all-target-$(1)-host-$(2): $$(CSREQ2_T_$(1)_H_$(2))
else
# This is a target only
all-target-$(1)-host-$(2): $$(SREQ2_T_$(1)_H_$(2))
endif
endef
$(foreach target,$(CFG_TARGET), \
$(foreach host,$(CFG_HOST), \
$(eval $(call ALL_TARGET_N,$(target),$(host)))))
ALL_TARGET_RULES = $(foreach target,$(CFG_TARGET), \
$(foreach host,$(CFG_HOST), \
all-target-$(target)-host-$(host)))
all: $(ALL_TARGET_RULES) $(GENERATED) docs
endif
######################################################################
# Re-configuration
######################################################################
ifndef CFG_DISABLE_MANAGE_SUBMODULES
# This is a pretty expensive operation but I don't see any way to avoid it
NEED_GIT_RECONFIG=$(shell cd "$(CFG_SRC_DIR)" && "$(CFG_GIT)" submodule status | grep -c '^\(+\|-\)')
else
NEED_GIT_RECONFIG=0
endif
ifeq ($(NEED_GIT_RECONFIG),0)
else
# If the submodules have changed then always execute config.mk
.PHONY: config.stamp
endif
Makefile config.mk: config.stamp
config.stamp: $(S)configure $(S)Makefile.in $(S)src/snapshots.txt
@$(call E, cfg: reconfiguring)
$(Q)$(S)configure $(CFG_CONFIGURE_ARGS)
######################################################################
# Primary-target makefiles
######################################################################
# Issue #9531: If you change the order of any of the following (or add
# new definitions), make sure definitions always precede their uses,
# especially for the dependency lists of recipes.
include $(CFG_SRC_DIR)mk/rt.mk
include $(CFG_SRC_DIR)mk/target.mk
include $(CFG_SRC_DIR)mk/host.mk
include $(CFG_SRC_DIR)mk/stage0.mk
include $(CFG_SRC_DIR)mk/rustllvm.mk
include $(CFG_SRC_DIR)mk/docs.mk
include $(CFG_SRC_DIR)mk/llvm.mk
######################################################################
# Secondary makefiles, conditionalized for speed
######################################################################
ifneq ($(strip $(findstring dist,$(MAKECMDGOALS)) \
$(findstring check,$(MAKECMDGOALS)) \
$(findstring test,$(MAKECMDGOALS)) \
$(findstring tidy,$(MAKECMDGOALS)) \
$(findstring clean,$(MAKECMDGOALS))),)
CFG_INFO := $(info cfg: including dist rules)
include $(CFG_SRC_DIR)mk/dist.mk
endif
ifneq ($(strip $(findstring snap,$(MAKECMDGOALS)) \
$(findstring clean,$(MAKECMDGOALS))),)
CFG_INFO := $(info cfg: including snap rules)
include $(CFG_SRC_DIR)mk/snap.mk
endif
ifneq ($(strip $(findstring check,$(MAKECMDGOALS)) \
$(findstring test,$(MAKECMDGOALS)) \
$(findstring perf,$(MAKECMDGOALS)) \
$(findstring tidy,$(MAKECMDGOALS))),)
CFG_INFO := $(info cfg: including test rules)
include $(CFG_SRC_DIR)mk/tests.mk
endif
ifneq ($(findstring perf,$(MAKECMDGOALS)),)
CFG_INFO := $(info cfg: including perf rules)
include $(CFG_SRC_DIR)mk/perf.mk
endif
ifneq ($(findstring clean,$(MAKECMDGOALS)),)
CFG_INFO := $(info cfg: including clean rules)
include $(CFG_SRC_DIR)mk/clean.mk
endif
ifneq ($(findstring install,$(MAKECMDGOALS)),)
CFG_INFO := $(info cfg: including install rules)
include $(CFG_SRC_DIR)mk/install.mk
endif
ifneq ($(strip $(findstring TAGS.emacs,$(MAKECMDGOALS)) \
$(findstring TAGS.vi,$(MAKECMDGOALS))),)
CFG_INFO := $(info cfg: including ctags rules)
include $(CFG_SRC_DIR)mk/ctags.mk
endif
# Find all of the .d files and include them to add information about
# header file dependencies.
ALL_DEP_FILES := $(ALL_OBJ_FILES:%.o=%.d)
-include $(ALL_DEP_FILES)