Finish bumping stage0
It looks like the last time had left some remaining cfg's -- which made me think
that the stage0 bump was actually successful. This brings us to a released 1.62
beta though.
This now brings us to cfg-clean, with the exception of check-cfg-features in bootstrap;
I'd prefer to leave that for a separate PR at this time since it's likely to be more tricky.
cc https://github.com/rust-lang/rust/pull/97147#issuecomment-1132845061
r? `@pietroalbini`
ptr::invalid is not equivalent to a int2ptr cast
I just realized I forgot to update these docs when adding `from_exposed_addr`.
Right now the docs say `invalid` and `from_exposed_addr` are both equivalent to a cast, and that is clearly not what we want.
Cc ``@Gankra``
update libbacktrace
It seems like previously we were on a tag of the backtrace repo; not sure if there is a policy that it should always be a tag?
Cc https://github.com/rust-lang/backtrace-rs/pull/462 `@alexcrichton` `@DrMeepster`
proc_macro: don't pass a client-side function pointer through the server.
Before this PR, `proc_macro::bridge::Client<F>` contained both:
* the C ABI entry-point `run`, that the server can call to start the client
* some "payload" `f: F` passed to that entry-point
* in practice, this was always a (client-side Rust ABI) `fn` pointer to the actual function the proc macro author wrote, i.e. `#[proc_macro] fn foo(input: TokenStream) -> TokenStream`
In other words, the client was passing one of its (Rust) `fn` pointers to the server, which was passing it back to the client, for the client to call (see later below for why that was ever needed).
I was inspired by `@nnethercote's` attempt to remove the `get_handle_counters` field from `Client` (see https://github.com/rust-lang/rust/pull/97004#issuecomment-1139273301), which combined with removing the `f` ("payload") field, could theoretically allow for a `#[repr(transparent)]` `Client` that mostly just newtypes the C ABI entry-point `fn` pointer <sub>(and in the context of e.g. wasm isolation, that's *all* you want, since you can reason about it from outside the wasm VM, as just a 32-bit "function table index", that you can pass to the wasm VM to call that function)</sub>.
<hr/>
So this PR removes that "payload". But it's not a simple refactor: the reason the field existed in the first place is because monomorphizing over a function type doesn't let you call the function without having a value of that type, because function types don't implement anything like `Default`, i.e.:
```rust
extern "C" fn ffi_wrapper<A, R, F: Fn(A) -> R>(arg: A) -> R {
let f: F = ???; // no way to get a value of `F`
f(arg)
}
```
That could be solved with something like this, if it was allowed:
```rust
extern "C" fn ffi_wrapper<
A, R,
F: Fn(A) -> R,
const f: F // not allowed because the type is a generic param
>(arg: A) -> R {
f(arg)
}
```
Instead, this PR contains a workaround in `proc_macro::bridge::selfless_reify` (see its module-level comment for more details) that can provide something similar to the `ffi_wrapper` example above, but limited to `F` being `Copy` and ZST (and requiring an `F` value to prove the caller actually can create values of `F` and it's not uninhabited or some other unsound situation).
<hr/>
Hopefully this time we don't have a performance regression, and this has a chance to land.
cc `@mystor` `@bjorn3`
Partially stabilize `(const_)slice_ptr_len` feature by stabilizing `NonNull::len`
This PR partially stabilizes features `const_slice_ptr_len` and `slice_ptr_len` by only stabilizing `NonNull::len`. This partial stabilization is tracked under features `slice_ptr_len_nonnull` and `const_slice_ptr_len_nonnull`, for which this PR can serve as the tracking issue.
To summarize the discussion from #71146 leading up to this partial stabilization request:
It's currently a bit footgunny to obtain the length of a raw slice pointer, stabilization of `NonNull:len` will help with removing these footguns. Some example footguns are:
```rust
/// # Safety
/// The caller must ensure that `ptr`:
/// 1. does not point to memory that was previously allocated but is now deallocated;
/// 2. is within the bounds of a single allocated object;
/// 3. does not to point to a slice for which the length exceeds `isize::MAX` bytes;
/// 4. points to a properly aligned address;
/// 5. does not point to uninitialized memory;
/// 6. does not point to a mutably borrowed memory location.
pub unsafe fn ptr_len<T>(ptr: core::ptr::NonNull<[T]>) -> usize {
(&*ptr.as_ptr()).len()
}
```
A slightly less complicated version (but still more complicated than it needs to be):
```rust
/// # Safety
/// The caller must ensure that the start of `ptr`:
/// 1. does not point to memory that was previously allocated but is now deallocated;
/// 2. must be within the bounds of a single allocated object.
pub unsafe fn ptr_len<T>(ptr: NonNull<[T]>) -> usize {
(&*(ptr.as_ptr() as *const [()])).len()
}
```
This PR does not stabilize `<*const [T]>::len` and `<*mut [T]>::len` because the tracking issue #71146 list a potential blocker for these methods, but this blocker [does not apply](https://github.com/rust-lang/rust/issues/71146#issuecomment-808735714) to `NonNull::len`.
We should probably also ping the [Constant Evaluation WG](https://github.com/rust-lang/const-eval) since this PR includes a `#[rustc_allow_const_fn_unstable(const_slice_ptr_len)]`. My instinct here is that this will probably be okay because the pointer is not actually dereferenced and `len()` does not touch the address component of the pointer, but would be best to double check :)
One potential down-side was raised that stabilizing `NonNull::len` could lead to encouragement of coding patterns like:
```
pub fn ptr_len<T>(ptr: *mut [T]) -> usize {
NonNull::new(ptr).unwrap().len()
}
```
which unnecessarily assert non-nullness. However, these are much less of a footgun than the above examples and this should be resolved when `slice_ptr_len` fully stabilizes eventually.
Remove impossible panic note from `Vec::append`
Neither the number of elements in a vector can overflow a `usize`, nor
can the amount of elements in two vectors.
It looks like the last time had left some remaining cfg's -- which made me think
that the stage0 bump was actually successful. This brings us to a released 1.62
beta though.
Add section on common message styles for Result::expect
Based on a question from https://github.com/rust-lang/project-error-handling/issues/50#issuecomment-1092339937
~~One thing I haven't decided on yet, should I duplicate this section on `Option::expect`, link to this section, or move it somewhere else and link to that location from both docs?~~: I ended up moving the section to `std::error` and referencing it from both `Result::expect` and `Option::expect`'s docs.
I think this section, when combined with the similar update I made on [`std::panic!`](https://doc.rust-lang.org/nightly/std/macro.panic.html#when-to-use-panic-vs-result) implies that we should possibly more aggressively encourage and support the "expect as precondition" style described in this section. The consensus among the libs team seems to be that panic should be used for bugs, not expected potential failure modes. The "expect as error message" style seems to align better with the panic for unrecoverable errors style where they're seen as normal errors where the only difference is a desire to kill the current execution unit (aka erlang style error handling). I'm wondering if we should be providing a panic hook similar to `human-panic` or more strongly recommending the "expect as precondition" style of expect message.
improve case conversion happy path
Someone shared the source code for [Go's string case conversion](19156a5474/src/strings/strings.go (L558-L616)).
It features a hot path for ascii-only strings (although I assume for reasons specific to go, they've opted for a read safe hot loop).
I've borrowed these ideas and also kept our existing code to provide a fast path + seamless utf-8 correct path fallback.
(Naive) Benchmarks can be found here https://github.com/conradludgate/case-conv
For the cases where non-ascii is found near the start, the performance of this algorithm does fall back to original speeds and has not had any measurable speed loss
Extend ptr::null and null_mut to all thin (including extern) types
Fixes https://github.com/rust-lang/rust/issues/93959
This change was accepted in https://rust-lang.github.io/rfcs/2580-ptr-meta.html
Note that this changes the signature of **stable** functions. The change should be backward-compatible, but it is **insta-stable** since it cannot (easily, at all?) be made available only through a `#![feature(…)]` opt-in.
The RFC also proposed the same change for `NonNull::dangling`, which makes sense it terms of its signature but not in terms of its implementation. `dangling` uses `align_of()` as an address. But what `align_of()` should be for extern types or whether it should be allowed at all remains an open question.
This commit depends on https://github.com/rust-lang/rust/pull/93977, which is not yet part of the bootstrap compiler. So `#[cfg]` is used to only apply the change in stage 1+. As far a I know bounds cannot be made conditional with `#[cfg]`, so the entire functions are duplicated. This is unfortunate but temporary.
Since this duplication makes it less obvious in the diff, the new definitions differ in:
* More permissive bounds (`Thin` instead of implied `Sized`)
* Different implementation
* Having `rustc_allow_const_fn_unstable(const_fn_trait_bound)`
* Having `rustc_allow_const_fn_unstable(ptr_metadata)`
[RFC 2011] Library code
CC https://github.com/rust-lang/rust/pull/96496
Based on https://github.com/dtolnay/case-studies/tree/master/autoref-specialization.
Basically creates two traits with the same method name. One trait is generic over any `T` and the other is specialized to any `T: Printable`.
The compiler will then call the corresponding trait method through auto reference.
```rust
fn main() {
let mut a = Capture::new();
let mut b = Capture::new();
(&Wrapper(&1i32)).try_capture(&mut a); // `try_capture` from `TryCapturePrintable`
(&Wrapper(&vec![1i32])).try_capture(&mut b); // `try_capture` from `TryCaptureGeneric`
assert_eq!(format!("{:?}", a), "1");
assert_eq!(format!("{:?}", b), "N/A");
}
```
r? `@scottmcm`
Add aliases for `current_dir`
Aliases were added for the equivalent C/C++ APIs for POSIX and Windows. Also, I added one for `pwd` which users may be more familiar with, from the command line.
Change orderings of `Debug` for the Atomic types to `Relaxed`.
This reduces synchronization between threads when debugging the atomic types. Reducing the synchronization means that executions with and without the debug calls will be more consistent, making it easier to debug.
We discussed this on the Rust Community Discord with `@ibraheemdev` before.
