This information is redundant with the position information already
provided. Also, no other -m diagnostics print out function name.
While here, report parameter leak diagnostics against the parameter
declaration position rather than the function, and use Warnl for
"moved to heap" messages.
Test cases updated programmatically by removing the first word from
every "no match for" error emitted by run.go:
go run run.go |& \
sed -E -n 's/^(.*):(.*): no match for `([^ ]* (.*))` in:$/\1!\2!\3!\4/p' | \
while IFS='!' read -r fn line before after; do
before=$(echo "$before" | sed 's/[.[\*^$()+?{|]/\\&/g')
after=$(echo "$after" | sed -E 's/(\&|\\)/\\&/g')
fn=$(find . -name "${fn}" | head -1)
sed -i -E -e "${line}s/\"${before}\"/\"${after}\"/" "${fn}"
done
Passes toolstash-check.
Change-Id: I6e02486b1409e4a8dbb2b9b816d22095835426b5
Reviewed-on: https://go-review.googlesource.com/c/go/+/195040
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
For most nodes (e.g., OPTRLIT, OMAKESLICE, OCONVIFACE), escape
analysis prints "escapes to heap" or "does not escape" to indicate
whether that node's allocation can be heap or stack allocated.
These messages are also emitted for OADDR, even though OADDR does not
actually allocate anything itself. Moreover, it's redundant because
escape analysis already prints "moved to heap" diagnostics when an
OADDR node like "&x" causes x to require heap allocation.
Because OADDR nodes don't allocate memory, my escape analysis rewrite
doesn't naturally emit the "escapes to heap" / "does not escape"
diagnostics for them. It's also non-trivial to replicate the exact
semantics esc.go uses for OADDR.
Since there are so many of these messages, I'm disabling them in this
CL by themselves. I modified esc.go to suppress the Warnl calls
without any other behavior changes, and then used a shell script to
automatically remove any ERROR messages mentioned by run.go in
"missing error" or "no match for" lines.
Fixes#16300.
Updates #23109.
Change-Id: I3993e2743c3ff83ccd0893f4e73b366ff8871a57
Reviewed-on: https://go-review.googlesource.com/c/go/+/170319
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: David Chase <drchase@google.com>
This is a simple tweak to allow a bit more mid-stack inlining.
In cases like this:
func f() {
g()
}
We'd really like to inline f into its callers. It can't hurt.
We implement this optimization by making calls a bit cheaper, enough
to afford a single call in the function body, but not 2.
The remaining budget allows for some argument modification, or perhaps
a wrapping conditional:
func f(x int) {
g(x, 0)
}
func f(x int) {
if x > 0 {
g()
}
}
Update #19348
Change-Id: Ifb1ea0dd1db216c3fd5c453c31c3355561fe406f
Reviewed-on: https://go-review.googlesource.com/c/147361
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: David Chase <drchase@google.com>
The previous CL introduced stack objects. This CL removes the old
ambiguously live liveness analysis. After this CL we're relying
on stack objects exclusively.
Update a bunch of liveness tests to reflect the new world.
Fixes#22350
Change-Id: I739b26e015882231011ce6bc1a7f426049e59f31
Reviewed-on: https://go-review.googlesource.com/c/134156
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The general policy for the current state of js/wasm is that it only
has to support tests that are also supported by nacl.
The test nilptr3.go makes assumptions about which nil checks can be
removed. Since WebAssembly does not signal on reading a null pointer,
all nil checks have to be explicit.
Updates #18892
Change-Id: I06a687860b8d22ae26b1c391499c0f5183e4c485
Reviewed-on: https://go-review.googlesource.com/110096
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The package unsafe docs say it's safe to convert an unsafe.Pointer to
uintptr in the argument list to an assembly function, but it was
erroneously only detecting normal pointers converted to unsafe.Pointer
and then to intptr.
Fixes#23051.
Change-Id: Id1be19f6d8f26f2d17ba815191717d2f4f899732
Reviewed-on: https://go-review.googlesource.com/82817
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This is an extension of
https://go-review.googlesource.com/c/31662/
to mark all the temporaries, not just the ssa-generated ones.
Before-and-after ls -l `go tool -n compile` shows a 3%
reduction in size (or rather, a prior 3% inflation for
failing to filter temps out properly.)
Replaced name-dependent "is it a temp?" tests with calls to
*Node.IsAutoTmp(), which depends on AutoTemp. Also replace
calls to istemp(n) with n.IsAutoTmp(), to reduce duplication
and clean up function name space. Generated temporaries
now come with a "." prefix to avoid (apparently harmless)
clashes with legal Go variable names.
Fixes#17644.
Fixes#17240.
Change-Id: If1417f29c79a7275d7303ddf859b51472890fd43
Reviewed-on: https://go-review.googlesource.com/32255
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Consider this code:
func f(*int)
func g() {
p := new(int)
f(p)
}
where f is an assembly function.
In general liveness analysis assumes that during the call to f, p is dead
in this frame. If f has retained p, p will be found alive in f's frame and keep
the new(int) from being garbage collected. This is all correct and works.
We use the Go func declaration for f to give the assembly function
liveness information (the arguments are assumed live for the entire call).
Now consider this code:
func h1() {
p := new(int)
syscall.Syscall(1, 2, 3, uintptr(unsafe.Pointer(p)))
}
Here syscall.Syscall is taking the place of f, but because its arguments
are uintptr, the liveness analysis and the garbage collector ignore them.
Since p is no longer live in h once the call starts, if the garbage collector
scans the stack while the system call is blocked, it will find no reference
to the new(int) and reclaim it. If the kernel is going to write to *p once
the call finishes, reclaiming the memory is a mistake.
We can't change the arguments or the liveness information for
syscall.Syscall itself, both for compatibility and because sometimes the
arguments really are integers, and the garbage collector will get quite upset
if it finds an integer where it expects a pointer. The problem is that
these arguments are fundamentally untyped.
The solution we have taken in the syscall package's wrappers in past
releases is to insert a call to a dummy function named "use", to make
it look like the argument is live during the call to syscall.Syscall:
func h2() {
p := new(int)
syscall.Syscall(1, 2, 3, uintptr(unsafe.Pointer(p)))
use(unsafe.Pointer(p))
}
Keeping p alive during the call means that if the garbage collector
scans the stack during the system call now, it will find the reference to p.
Unfortunately, this approach is not available to users outside syscall,
because 'use' is unexported, and people also have to realize they need
to use it and do so. There is much existing code using syscall.Syscall
without a 'use'-like function. That code will fail very occasionally in
mysterious ways (see #13372).
This CL fixes all that existing code by making the compiler do the right
thing automatically, without any code modifications. That is, it takes h1
above, which is incorrect code today, and makes it correct code.
Specifically, if the compiler sees a foreign func definition (one
without a body) that has uintptr arguments, it marks those arguments
as "unsafe uintptrs". If it later sees the function being called
with uintptr(unsafe.Pointer(x)) as an argument, it arranges to mark x
as having escaped, and it makes sure to hold x in a live temporary
variable until the call returns, so that the garbage collector cannot
reclaim whatever heap memory x points to.
For now I am leaving the explicit calls to use in package syscall,
but they can be removed early in a future cycle (likely Go 1.7).
The rule has no effect on escape analysis, only on liveness analysis.
Fixes#13372.
Change-Id: I2addb83f70d08db08c64d394f9d06ff0a063c500
Reviewed-on: https://go-review.googlesource.com/18584
Reviewed-by: Ian Lance Taylor <iant@golang.org>
