Removes the private extension to heap snapshots, which did not represent nesting.
Change-Id: I62e60922f094db68cf63bac037140e1a8b2b9fd7
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/152424
Commit-Queue: Ryan Macnak <rmacnak@google.com>
Reviewed-by: Ben Konyi <bkonyi@google.com>
Avoids failing on Linux from exhausting Page Table Entries before exhausting physical memory or address space.
Change-Id: Idffbd0a2eb8b030f2afabb4c31135fb75deca59f
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/144669
Commit-Queue: Ryan Macnak <rmacnak@google.com>
Reviewed-by: Vyacheslav Egorov <vegorov@google.com>
tcmalloc and jemalloc have both been observed to hold onto lots of free'd zone segments (jemalloc to the point of causing OOM), so instead of using malloc to allocate segments, we allocate directly from mmap/zx_vmo_create/VirtualAlloc, and cache a small number of the normal sized segments.
flutter doctor at exit ("idle")
Process::MaxRSS() 261009408 -> 258756608 (-0.86%)
Process::CurrentRSS() 252932096 -> 205881344 (-18.6%)
Bug: https://github.com/dart-lang/sdk/issues/38820
Change-Id: I319069678b9d44383a9921ec03a963517991dd11
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/121264
Commit-Queue: Ryan Macnak <rmacnak@google.com>
Reviewed-by: Siva Annamalai <asiva@google.com>
Reviewed-by: Zach Anderson <zra@google.com>
- Introduce a slimmed down version of thread.h, which just depends on the
Zone and StackResource.
- Introduce a layering check that would prevent the coupling in the future.
This is the first step towards decoupling compiler from runtime.
There are multiple reasons to introduce the decoupling but the main
reason currently is to introduce a controlled surface through which
compiler reaches into runtime to catch any places where runtime word size
might influence the compiler and then enable building compiler that
targets 32-bit runtime but is embedded into a 64-bit runtime.
Issue https://github.com/dart-lang/sdk/issues/31709
Change-Id: Id63ebbaddca55dd097298e51c90d957a73fa476e
Reviewed-on: https://dart-review.googlesource.com/c/87182
Commit-Queue: Vyacheslav Egorov <vegorov@google.com>
Reviewed-by: Martin Kustermann <kustermann@google.com>
Relands 165c583d57
[VM] Introduction of type testing stubs - Part 1
This CL:
* Adds a field to [RawAbstractType] which will always hold a pointer
to the entrypoint of a type testing stub
* Makes this new field be initialized to a default stub whenever a
instances are created (e.g. via Type::New(), snapshot reader, ...)
* Makes the clustered snapshotter write a reference to the
corresponding [RawInstructions] object when writing the field and do
the reverse when reading it.
* Makes us call the type testing stub for performing assert-assignable
checks.
To reduce unnecessary loads on callsites, we store the entrypoint of the
type testing stubs directly in the type objects. This means that the
caller of type testing stubs can simply branch there without populating
a code object first. This also means that the type testing stubs
themselves have no access to a pool and we therefore also don't hold on
to the [Code] object, only the [Instruction] object is necessary.
The type testing stubs do not setup a frame themselves and also have no
safepoint. In the case when the type testing stubs could not determine
a positive answer they will tail-call a general-purpose stub.
The general-purpose stub sets up a stub frame, tries to consult a
[SubtypeTestCache] and bails out to runtime if this was unsuccessful.
This CL is just the the first, for ease of reviewing. The actual
type-specialized type testing stubs will be generated in later CLs.
Reviewed-on: https://dart-review.googlesource.com/44787
Relands f226c22424
[VM] Introduction of type testing stubs - Part 2
This CL starts building type testing stubs specialzed for [Type] objects
we test against.
More specifically, it adds support for:
* Handling obvious fast cases on the call sites (while still having a
call to stub for negative case)
* Handling type tests against type parameters, by loading the value
of the type parameter on the call sites and invoking it's type testing stub.
* Specialzed type testing stubs for instantiated types where we can
do [CidRange]-based subtype-checks.
==> e.g. String/List<dynamic>
* Specialzed type testing stubs for instantiated types where we can
do [CidRange]-based subclass-checks for the class and
[CidRange]-based subtype-checks for the type arguments.
==> e.g. Widget<State>, where we know [Widget] is only extended and not
implemented.
* Specialzed type testing stubs for certain non-instantiated types where we
can do [CidRange]-based subclass-checks for the class and
[CidRange]-based subtype-checks for the instantiated type arguments and
cid based comparisons for type parameters. (Note that this fast-case migth
result in some false-negatives!)
==> e.g. _HashMapEntry<K, V>, where we know [_HashMapEntry] is only
extended and not implemented.
This optimizes cases where the caller uses `new HashMap<A, B>()` and only
uses `A` and `B` as key/values (and not subclasses of it). The false-negative
can occur when subtypes of A or B are used. In such cases we fall back to the
[SubtypeTestCache]-based imlementation.
Reviewed-on: https://dart-review.googlesource.com/44788
Relands 25f98bcc75
[VM] Introduction of type testing stubs - Part 3
The changes include:
* Make AssertAssignableInstr no longer have a call-summary, which
helps methods with several parameter checks by not having to
re-load/re-initialize type arguments registers
* Lazily create SubtypeTestCaches: We already go to runtime to warm up
the caches, so we now also create the caches on the first runtime
call and patch the pool entries.
* No longer load the destination name into a register: We only need
the name when we throw an exception, so it is not on the hot path.
Instead we let the runtime look at the call site, decoding a pool
index from the instructions stream. The destination name will be
available in the pool, at a consecutive index to the subtype cache.
* Remove the fall-through to N=1 case for probing subtypeing tests,
since those will always be handled by the optimized stubs.
* Do not generate optimized stubs for FutureOr<T> (so far it just
falled-through to TTS). We can make optimzed version of that later,
but it requires special subtyping rules.
* Local code quality improvement in the type-testing-stubs: Avoid
extra jump at last case of cid-class-range checks.
There are still a number of optimization opportunities we can do in
future changes.
Reviewed-on: https://dart-review.googlesource.com/46984
Relands 2c52480ec8
[VM] Introduction of type testing stubs - Part 4
In order to avoid generating type testing stubs for too many types in
the system - and thereby potentially cause an increase in code size -
this change introduces a smarter way to decide for which types we should
generate optimized type testing stubs.
The precompiler creates a [TypeUsageInfo] which we use to collect
information. More specifically:
a) We collect the destination types for all type checks we emit
(we do this inside AssertAssignableInstr::EmitNativeCode).
-> These are types we might want to generate optimized type testing
stubs for.
b) We collect type argument vectors used in instance creations (we do
this inside AllocateObjectInstr::EmitNativeCode) and keep a set of
of used type argument vectors for each class.
After the precompiler has finished compiling normal code we scan the set
of destination types collected in a) for uninstantiated types (or more
specifically, type parameter types).
We then propagate the type argument vectors used on object allocation sites,
which were collected in b), in order to find out what kind of types are flowing
into those type parameters.
This allows us to extend the set of types which we test against, by
adding the types that flow into type parameters.
We use this final augmented set of destination types as a "filter" when
making the decision whether to generate an optimized type testing stub
for a given type.
Reviewed-on: https://dart-review.googlesource.com/48640
Issue https://github.com/dart-lang/sdk/issues/32603
Closes https://github.com/dart-lang/sdk/issues/32852
Change-Id: Ib79fbe7f043aa88f32bddad62d7656c638914b44
Reviewed-on: https://dart-review.googlesource.com/50944
Commit-Queue: Martin Kustermann <kustermann@google.com>
Reviewed-by: Régis Crelier <regis@google.com>
Relands 165c583d57
[VM] Introduction of type testing stubs - Part 1
This CL:
* Adds a field to [RawAbstractType] which will always hold a pointer
to the entrypoint of a type testing stub
* Makes this new field be initialized to a default stub whenever a
instances are created (e.g. via Type::New(), snapshot reader, ...)
* Makes the clustered snapshotter write a reference to the
corresponding [RawInstructions] object when writing the field and do
the reverse when reading it.
* Makes us call the type testing stub for performing assert-assignable
checks.
To reduce unnecessary loads on callsites, we store the entrypoint of the
type testing stubs directly in the type objects. This means that the
caller of type testing stubs can simply branch there without populating
a code object first. This also means that the type testing stubs
themselves have no access to a pool and we therefore also don't hold on
to the [Code] object, only the [Instruction] object is necessary.
The type testing stubs do not setup a frame themselves and also have no
safepoint. In the case when the type testing stubs could not determine
a positive answer they will tail-call a general-purpose stub.
The general-purpose stub sets up a stub frame, tries to consult a
[SubtypeTestCache] and bails out to runtime if this was unsuccessful.
This CL is just the the first, for ease of reviewing. The actual
type-specialized type testing stubs will be generated in later CLs.
Reviewed-on: https://dart-review.googlesource.com/44787
Relands f226c22424
[VM] Introduction of type testing stubs - Part 2
This CL starts building type testing stubs specialzed for [Type] objects
we test against.
More specifically, it adds support for:
* Handling obvious fast cases on the call sites (while still having a
call to stub for negative case)
* Handling type tests against type parameters, by loading the value
of the type parameter on the call sites and invoking it's type testing stub.
* Specialzed type testing stubs for instantiated types where we can
do [CidRange]-based subtype-checks.
==> e.g. String/List<dynamic>
* Specialzed type testing stubs for instantiated types where we can
do [CidRange]-based subclass-checks for the class and
[CidRange]-based subtype-checks for the type arguments.
==> e.g. Widget<State>, where we know [Widget] is only extended and not
implemented.
* Specialzed type testing stubs for certain non-instantiated types where we
can do [CidRange]-based subclass-checks for the class and
[CidRange]-based subtype-checks for the instantiated type arguments and
cid based comparisons for type parameters. (Note that this fast-case migth
result in some false-negatives!)
==> e.g. _HashMapEntry<K, V>, where we know [_HashMapEntry] is only
extended and not implemented.
This optimizes cases where the caller uses `new HashMap<A, B>()` and only
uses `A` and `B` as key/values (and not subclasses of it). The false-negative
can occur when subtypes of A or B are used. In such cases we fall back to the
[SubtypeTestCache]-based imlementation.
Reviewed-on: https://dart-review.googlesource.com/44788
Relands 25f98bcc75
[VM] Introduction of type testing stubs - Part 3
The changes include:
* Make AssertAssignableInstr no longer have a call-summary, which
helps methods with several parameter checks by not having to
re-load/re-initialize type arguments registers
* Lazily create SubtypeTestCaches: We already go to runtime to warm up
the caches, so we now also create the caches on the first runtime
call and patch the pool entries.
* No longer load the destination name into a register: We only need
the name when we throw an exception, so it is not on the hot path.
Instead we let the runtime look at the call site, decoding a pool
index from the instructions stream. The destination name will be
available in the pool, at a consecutive index to the subtype cache.
* Remove the fall-through to N=1 case for probing subtypeing tests,
since those will always be handled by the optimized stubs.
* Do not generate optimized stubs for FutureOr<T> (so far it just
falled-through to TTS). We can make optimzed version of that later,
but it requires special subtyping rules.
* Local code quality improvement in the type-testing-stubs: Avoid
extra jump at last case of cid-class-range checks.
There are still a number of optimization opportunities we can do in
future changes.
Reviewed-on: https://dart-review.googlesource.com/46984
Relands 2c52480ec8
[VM] Introduction of type testing stubs - Part 4
In order to avoid generating type testing stubs for too many types in
the system - and thereby potentially cause an increase in code size -
this change introduces a smarter way to decide for which types we should
generate optimized type testing stubs.
The precompiler creates a [TypeUsageInfo] which we use to collect
information. More specifically:
a) We collect the destination types for all type checks we emit
(we do this inside AssertAssignableInstr::EmitNativeCode).
-> These are types we might want to generate optimized type testing
stubs for.
b) We collect type argument vectors used in instance creations (we do
this inside AllocateObjectInstr::EmitNativeCode) and keep a set of
of used type argument vectors for each class.
After the precompiler has finished compiling normal code we scan the set
of destination types collected in a) for uninstantiated types (or more
specifically, type parameter types).
We then propagate the type argument vectors used on object allocation sites,
which were collected in b), in order to find out what kind of types are flowing
into those type parameters.
This allows us to extend the set of types which we test against, by
adding the types that flow into type parameters.
We use this final augmented set of destination types as a "filter" when
making the decision whether to generate an optimized type testing stub
for a given type.
Reviewed-on: https://dart-review.googlesource.com/48640
Issue https://github.com/dart-lang/sdk/issues/32603
Change-Id: I6d33d4ca3d5187a1eb1664078c003061855f0160
Reviewed-on: https://dart-review.googlesource.com/50482
Reviewed-by: Vyacheslav Egorov <vegorov@google.com>
Commit-Queue: Martin Kustermann <kustermann@google.com>
This reverts commit 8054409a02.
Reason for revert: Potential cause of flakes, not entirely clear yet if it was caused by this CL.
Change-Id: Icb119a107f22245ba2f303c7f2ae11f061f605f5
Reviewed-on: https://dart-review.googlesource.com/50261
Reviewed-by: Martin Kustermann <kustermann@google.com>
Commit-Queue: Martin Kustermann <kustermann@google.com>
Relands 165c583d57
[VM] Introduction of type testing stubs - Part 1
This CL:
* Adds a field to [RawAbstractType] which will always hold a pointer
to the entrypoint of a type testing stub
* Makes this new field be initialized to a default stub whenever a
instances are created (e.g. via Type::New(), snapshot reader, ...)
* Makes the clustered snapshotter write a reference to the
corresponding [RawInstructions] object when writing the field and do
the reverse when reading it.
* Makes us call the type testing stub for performing assert-assignable
checks.
To reduce unnecessary loads on callsites, we store the entrypoint of the
type testing stubs directly in the type objects. This means that the
caller of type testing stubs can simply branch there without populating
a code object first. This also means that the type testing stubs
themselves have no access to a pool and we therefore also don't hold on
to the [Code] object, only the [Instruction] object is necessary.
The type testing stubs do not setup a frame themselves and also have no
safepoint. In the case when the type testing stubs could not determine
a positive answer they will tail-call a general-purpose stub.
The general-purpose stub sets up a stub frame, tries to consult a
[SubtypeTestCache] and bails out to runtime if this was unsuccessful.
This CL is just the the first, for ease of reviewing. The actual
type-specialized type testing stubs will be generated in later CLs.
Reviewed-on: https://dart-review.googlesource.com/44787
Relands f226c22424
[VM] Introduction of type testing stubs - Part 2
This CL starts building type testing stubs specialzed for [Type] objects
we test against.
More specifically, it adds support for:
* Handling obvious fast cases on the call sites (while still having a
call to stub for negative case)
* Handling type tests against type parameters, by loading the value
of the type parameter on the call sites and invoking it's type testing stub.
* Specialzed type testing stubs for instantiated types where we can
do [CidRange]-based subtype-checks.
==> e.g. String/List<dynamic>
* Specialzed type testing stubs for instantiated types where we can
do [CidRange]-based subclass-checks for the class and
[CidRange]-based subtype-checks for the type arguments.
==> e.g. Widget<State>, where we know [Widget] is only extended and not
implemented.
* Specialzed type testing stubs for certain non-instantiated types where we
can do [CidRange]-based subclass-checks for the class and
[CidRange]-based subtype-checks for the instantiated type arguments and
cid based comparisons for type parameters. (Note that this fast-case migth
result in some false-negatives!)
==> e.g. _HashMapEntry<K, V>, where we know [_HashMapEntry] is only
extended and not implemented.
This optimizes cases where the caller uses `new HashMap<A, B>()` and only
uses `A` and `B` as key/values (and not subclasses of it). The false-negative
can occur when subtypes of A or B are used. In such cases we fall back to the
[SubtypeTestCache]-based imlementation.
Reviewed-on: https://dart-review.googlesource.com/44788
Relands 25f98bcc75
[VM] Introduction of type testing stubs - Part 3
The changes include:
* Make AssertAssignableInstr no longer have a call-summary, which
helps methods with several parameter checks by not having to
re-load/re-initialize type arguments registers
* Lazily create SubtypeTestCaches: We already go to runtime to warm up
the caches, so we now also create the caches on the first runtime
call and patch the pool entries.
* No longer load the destination name into a register: We only need
the name when we throw an exception, so it is not on the hot path.
Instead we let the runtime look at the call site, decoding a pool
index from the instructions stream. The destination name will be
available in the pool, at a consecutive index to the subtype cache.
* Remove the fall-through to N=1 case for probing subtypeing tests,
since those will always be handled by the optimized stubs.
* Do not generate optimized stubs for FutureOr<T> (so far it just
falled-through to TTS). We can make optimzed version of that later,
but it requires special subtyping rules.
* Local code quality improvement in the type-testing-stubs: Avoid
extra jump at last case of cid-class-range checks.
There are still a number of optimization opportunities we can do in
future changes.
Reviewed-on: https://dart-review.googlesource.com/46984
Relands 2c52480ec8
[VM] Introduction of type testing stubs - Part 4
In order to avoid generating type testing stubs for too many types in
the system - and thereby potentially cause an increase in code size -
this change introduces a smarter way to decide for which types we should
generate optimized type testing stubs.
The precompiler creates a [TypeUsageInfo] which we use to collect
information. More specifically:
a) We collect the destination types for all type checks we emit
(we do this inside AssertAssignableInstr::EmitNativeCode).
-> These are types we might want to generate optimized type testing
stubs for.
b) We collect type argument vectors used in instance creations (we do
this inside AllocateObjectInstr::EmitNativeCode) and keep a set of
of used type argument vectors for each class.
After the precompiler has finished compiling normal code we scan the set
of destination types collected in a) for uninstantiated types (or more
specifically, type parameter types).
We then propagate the type argument vectors used on object allocation sites,
which were collected in b), in order to find out what kind of types are flowing
into those type parameters.
This allows us to extend the set of types which we test against, by
adding the types that flow into type parameters.
We use this final augmented set of destination types as a "filter" when
making the decision whether to generate an optimized type testing stub
for a given type.
Reviewed-on: https://dart-review.googlesource.com/48640
Issue https://github.com/dart-lang/sdk/issues/32603
Change-Id: I44a1d5d4b27454ae026aef2a301aada3dd399ea0
Reviewed-on: https://dart-review.googlesource.com/49861
Commit-Queue: Martin Kustermann <kustermann@google.com>
Reviewed-by: Vyacheslav Egorov <vegorov@google.com>
In order to avoid generating type testing stubs for too many types in
the system - and thereby potentially cause an increase in code size -
this change introduces a smarter way to decide for which types we should
generate optimized type testing stubs.
The precompiler creates a [TypeUsageInfo] which we use to collect
information. More specifically:
a) We collect the destination types for all type checks we emit
(we do this inside AssertAssignableInstr::EmitNativeCode).
-> These are types we might want to generate optimized type testing
stubs for.
b) We collect type argument vectors used in instance creations (we do
this inside AllocateObjectInstr::EmitNativeCode) and keep a set of
of used type argument vectors for each class.
After the precompiler has finished compiling normal code we scan the set
of destination types collected in a) for uninstantiated types (or more
specifically, type parameter types).
We then propagate the type argument vectors used on object allocation sites,
which were collected in b), in order to find out what kind of types are flowing
into those type parameters.
This allows us to extend the set of types which we test against, by
adding the types that flow into type parameters.
We use this final augmented set of destination types as a "filter" when
making the decision whether to generate an optimized type testing stub
for a given type.
Issue https://github.com/dart-lang/sdk/issues/32603
Measured impact on flutter HEAD-HEAD-HEAD with TTS Part 1 - 4 applied (2018-04-03):
* stock build benchmark: around 4% improvement
* gallery app.so size: -2.68% (13987348 -> 13612928)
* gallery memory: no sigificant changes:
- SubtypeTestCache: - 10kb
- ObjectPool: + 6 kb
- Type: no change (probably due to wasted alignment slot before)
- TypeParameter: + 4 kb (can get rid of the field here later)
* gallery AOT compile-time: measured +1.3%, inside flakiness range
Change-Id: I12a398d18f970ba2db741913bb47b0f36ae38d58
Reviewed-on: https://dart-review.googlesource.com/48640
Commit-Queue: Martin Kustermann <kustermann@google.com>
Reviewed-by: Régis Crelier <regis@google.com>
i.e. #ifndef VM_WHATEVER -> #ifndef RUNTIME_VM_WHATEVER
This lets us remove a hack from the PRESUBMIT.py script that existed
for reasons that are no longer valid, and sets us up to add some
presubmit checks for the GN build.
R=asiva@google.com, rmacnak@google.com
Review URL: https://codereview.chromium.org/2450713004 .
This unburdens users of StackZone from needing to include handles_impl.h. A new use of StackZone was recently added to heap.cc without a include of handles_impl.h, and this caused link-time errors on some versions of gcc.
R=asiva@google.com
Review URL: https://codereview.chromium.org/2362573002 .
This CL removes the use of STL map from freelist.cc by adding
MallocDirectChainedHashMap in hash_map.h and adding an iterator for
BaseDirectChainedHashMap there.
It also removes a use of STL map from hash_table.h that was dead code.
R=johnmccutchan@google.com
Review URL: https://codereview.chromium.org/2083103002 .
Adds Dart_DefaultCanonicalizeUrl() to the dart embedding api.
Motivation:
As we try to get source reloading working for the standalone embedder, things get simpler if an isolate doesn't run Dart code while it is loading Dart code. We intend to solve this by moving the embedder tag handler calls to the service isolate. But making a blocking rpc into the service isolate whenever a url needs to be canonicalized during parsing seems like it would slow things down and make things complicated. By moving canonicalization into C++, we avoid this.
R=ahe@google.com, fschneider@google.com, johnmccutchan@google.com
Review URL: https://codereview.chromium.org/2011543002 .
- Add PRODUCT define and build mode to gyp configurations.
- Add product mode to test harness.
- Start to unify list of flags.
- Allow flags to be constant for particular build configurations.
R=fschneider@google.com
Review URL: https://codereview.chromium.org/1663863002 .
- This CL only adds support for synchronous blocks of time. A follow up CL will add asynchronous blocks of time.
- Reports true thread id to tracing system. This is an improvement over Mojo's tracing helper.
- Dart events are included in individual isolate traces and global traces obtained via the embedders API.
- Dart events are included in the write to disk path (--timeline_dir).
R=rmacnak@google.com
Review URL: https://codereview.chromium.org//1377663002 .
I was able to convert 49 SNPrint(NULL, 0, ...) patterns to use the
macro. I had to use a #define for the format string 5 times due to
uses that didn't fit the macro.
2 occurences of SNPrint(NULL, 0, ...) had >=2 possibilities for the
format string based on runtime values, and I didn't try to convert
them.
Fixed ~10 format strings.
BUG=
R=iposva@google.com
Review URL: https://codereview.chromium.org//1331623002 .
- Add TimelineEventBlockIterator - iterate over TimelineEventBlocks.
- Add TimelineAnalysisThread - All events for a specific thread.
- Add TimelineAnalysis - Utility for analyzing timeline events.
- Add unit test for TimelineAnalysis thread discovery and block sorting.
R=rmacnak@google.com
Review URL: https://codereview.chromium.org//1284263002 .
This is needed to enable parallel marking/sweeping (and in the future, compilation) tasks to have their own zone allocations and to safely call code that relies on various scoped constructs (stack resources).
The next step is to migrate the scopes like NoSafepointScope, NoHandleScope, etc. from isolate- to thread-based interfaces.
NOTE: This is a copy of issue 1204303003.
BUG=
Review URL: https://codereview.chromium.org//1226403003 .
When the compiler figures out that a particular code path does not add any elements to a zone-allocated growable array, it will generate a warning for the debug-mode zapping code in Zone::Free:
/usr/include/bits/string3.h:82:32: error: call to ‘__warn_memset_zero_len’ declared with attribute warning: memset used with constant zero length parameter; this could be due to transposed parameters [-Werror]
There are plenty of false positives, e.g., a struct member happens to be unpopulated at a particular use case.
Fix this by only calling memset for non-zero lengths.
TBR=asiva@google.com
Review URL: https://codereview.chromium.org//849873002
git-svn-id: https://dart.googlecode.com/svn/branches/bleeding_edge/dart@42825 260f80e4-7a28-3924-810f-c04153c831b5
Instead of passing a size in bytes to the allocation function, we now
have a templatized Alloc function:
zone->Alloc<Type>(len)
This is better for security, as we can check for integer overflow in
the size computation before performing the allocation. Before, we
often failed to check this.
Review URL: https://chromiumcodereview.appspot.com//10836061
git-svn-id: https://dart.googlecode.com/svn/branches/bleeding_edge/dart@10254 260f80e4-7a28-3924-810f-c04153c831b5
The native port callback is now passed the message as a decodes
Dart_CMessage structure. The Dart_CMessage structure is allocated
in a zone and the callback receiving it should expect the
lifetime to be controlled by the caller.
Added support for zones which do not require a current
isolate. Changed the GrowableArray to support allocating in
aprovided zone instead of the zone for the current isolate.
R=turnidge@google.com, asiva@google.com
BUG=
TEST=
Review URL: https://chromiumcodereview.appspot.com//9325022
git-svn-id: https://dart.googlecode.com/svn/branches/bleeding_edge/dart@4068 260f80e4-7a28-3924-810f-c04153c831b5
