cpython/Makefile.in

382 lines
11 KiB
Makefile

########################################################################
# Copyright 1991-1995 by Stichting Mathematisch Centrum, Amsterdam,
# The Netherlands.
#
# All Rights Reserved
#
# Permission to use, copy, modify, and distribute this software and its
# documentation for any purpose and without fee is hereby granted,
# provided that the above copyright notice appear in all copies and that
# both that copyright notice and this permission notice appear in
# supporting documentation, and that the names of Stichting Mathematisch
# Centrum or CWI not be used in advertising or publicity pertaining to
# distribution of the software without specific, written prior permission.
#
# STICHTING MATHEMATISCH CENTRUM DISCLAIMS ALL WARRANTIES WITH REGARD TO
# THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND
# FITNESS, IN NO EVENT SHALL STICHTING MATHEMATISCH CENTRUM BE LIABLE
# FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
# ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
# OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
########################################################################
# Top-level Makefile for Python
#
# As distributed, this file is called Makefile.in; it is processed
# into the real Makefile by running the script ./configure, which
# replaces things like @spam@ with values appropriate for your system.
# This means that if you edit Makefile, your changes get lost the next
# time you run the configure script. Ideally, you can do:
#
# ./configure
# make
# make test
# make install
#
# The top-level Makefile invokes make recursively in a number of
# subdirectories (see the SUBDIRS variable below). If you want to,
# you can invoke make in individual subdirectories. However, the
# sub-Makefiles are also generated by configure, and the quickest way
# to make sure they are up to date is by running make (or "make
# Makefiles") at the top level. This is particularly important for
# Modules/Makefile, which has to be regenerated every time you edit
# Modules/Setup. The python executable is built in the Modules
# directory and then moved to the top-level directory. The recursive
# makes pass three options to subordinate makes: OPT (a quick way to
# change some compiler options; it defaults to -O), prefix and
# exec_prefix (the installation paths).
#
# If recursive makes fail, try invoking make as "make MAKE=make".
#
# See also the section "Build instructions" in the README file.
# Substitutions by configure
srcdir= @srcdir@
VPATH= @srcdir@
RANLIB= @RANLIB@
# Machine-dependent subdirectories
MACHDEP= @MACHDEP@
# Install prefix for architecture-independent files
prefix= @prefix@
# Install prefix for architecture-dependent files
exec_prefix= @exec_prefix@
# Expanded directories
MANDIR=$(prefix)/man
BINDIR=$(exec_prefix)/bin
LIBDIR=$(exec_prefix)/lib
INCLUDEDIR=$(prefix)/include
SCRIPTDIR=$(prefix)/lib
# Symbols used for using shared libraries
SO= @SO@
LDSHARED= @LDSHARED@
CCSHARED= @CCSHARED@
LINKFORSHARED= @LINKFORSHARED@
DESTSHARED= $(SCRIPTDIR)/python/$(MACHDEP)
# Shell used by make (some versions default to the login shell, which is bad)
SHELL= /bin/sh
# Portable install script (configure doesn't always guess right)
INSTALL= @srcdir@/install-sh -c
INSTALL_PROGRAM=${INSTALL}
INSTALL_DATA= ${INSTALL} -m 644
# --with-PACKAGE options for configure script
# e.g. --with-readline --with-svr5 --with-solaris --with-thread
# (see README for an explanation)
WITH=
# Compiler options passed to subordinate makes
OPT= @OPT@
# Subdirectories where to run make recursively
SUBDIRS= Parser Objects Python Modules
# Other subdirectories
SUBDIRSTOO= Include Lib Doc Misc Demo readline Grammar
# Files and directories to be distributed
CONFIGFILES= configure configure.in acconfig.h config.h.in Makefile.in
DISTFILES= README ChangeLog $(CONFIGFILES)
DISTDIRS= $(SUBDIRS) $(SUBDIRSTOO) Ext-dummy
DIST= $(DISTFILES) $(DISTDIRS)
# Default target
all: python
# Build the interpreter
python: Makefiles
@for i in $(SUBDIRS); do \
(echo Making in subdirectory $$i; cd $$i; \
$(MAKE) OPT="$(OPT)" \
prefix="$(prefix)" \
exec_prefix="$(exec_prefix)" \
all); \
done
# Test the interpreter (twice, once without .pyc files, once with)
TESTPATH= $(srcdir)/Lib:$(srcdir)/Lib/test:./Modules
test: python
-rm -f $(srcdir)/Lib/test/*.pyc
PYTHONPATH=$(TESTPATH) ./python -c 'import autotest'
PYTHONPATH=$(TESTPATH) ./python -c 'import autotest'
# Install everything
install: bininstall libinstall maninstall inclinstall \
libainstall sharedinstall
# Install the interpreter
bininstall: python
@for i in $(BINDIR); \
do \
if test ! -d $$i; then \
echo "Creating directory $$i"; \
mkdir $$i; \
chmod 755 $$i; \
else true; \
fi; \
done
$(INSTALL_PROGRAM) python $(BINDIR)/python
# Install the library.
# If your system does not support "cp -r", try "copy -r" or perhaps
# something like find Lib -print | cpio -pacvdmu $(LIBDEST)
LIBDEST= $(SCRIPTDIR)/python
libinstall: python
@for i in $(SCRIPTDIR) $(LIBDEST); \
do \
if test ! -d $$i; then \
echo "Creating directory $$i"; \
mkdir $$i; \
chmod 755 $$i; \
else true; \
fi; \
done
cp -r $(srcdir)/Lib/* $(LIBDEST)
PYTHONPATH=$(LIBDEST) \
./python $(LIBDEST)/compileall.py $(LIBDEST)
$(MAKE) \
OPT="$(OPT)" \
SO="$(SO)" \
LDSHARED="$(LDSHARED)" \
CCSHARED="$(CCSHARED)" \
LINKFORSHARED="$(LINKFORSHARED)" \
DESTSHARED="$(DESTSHARED)" \
sharedinstall
# Install the manual page
maninstall:
@for i in $(MANDIR) $(MANDIR)/man1; \
do \
if test ! -d $$i; then \
echo "Creating directory $$i"; \
mkdir $$i; \
chmod 755 $$i; \
else true; \
fi; \
done
$(INSTALL_DATA) $(srcdir)/Misc/python.man \
$(MANDIR)/man1/python.1
# Install the include files
INCLUDEPY= $(INCLUDEDIR)/Py
inclinstall:
@for i in $(INCLUDEDIR) $(INCLUDEPY); \
do \
if test ! -d $$i; then \
echo "Creating directory $$i"; \
mkdir $$i; \
chmod 755 $$i; \
else true; \
fi; \
done
@for i in $(srcdir)/Include/*.h; \
do \
echo $(INSTALL_DATA) $$i $(INCLUDEPY); \
$(INSTALL_DATA) $$i $(INCLUDEPY); \
done
# Install the lib*.a files and miscellaneous stuff needed by extensions
LIBP= $(LIBDIR)/python
LIBPL= $(LIBP)/lib
libainstall: all
@for i in $(LIBDIR) $(LIBP) $(LIBPL); \
do \
if test ! -d $$i; then \
echo "Creating directory $$i"; \
mkdir $$i; \
chmod 755 $$i; \
else true; \
fi; \
done
@for i in $(SUBDIRS); do \
echo Installing in subdirectory $$i; \
$(INSTALL_DATA) $$i/lib$$i.a $(LIBPL)/lib$$i.a; \
$(RANLIB) $(LIBPL)/lib$$i.a; \
done
$(INSTALL_DATA) Modules/config.c $(LIBPL)/config.c
$(INSTALL_DATA) $(srcdir)/Modules/getpath.c $(LIBPL)/getpath.c
$(INSTALL_DATA) $(srcdir)/Modules/config.c.in $(LIBPL)/config.c.in
$(INSTALL_DATA) Modules/Makefile $(LIBPL)/Makefile
$(INSTALL_DATA) Modules/Setup $(LIBPL)/Setup
$(INSTALL_DATA) $(srcdir)/Modules/makesetup $(LIBPL)/makesetup
$(INSTALL_DATA) config.h $(LIBPL)/config.h
$(INSTALL_DATA) $(srcdir)/Python/frozenmain.c $(LIBPL)/frozenmain.c
$(INSTALL_DATA) Modules/main.o $(LIBPL)/main.o
# Install the dynamically loadable modules
sharedinstall:
cd Modules; $(MAKE) \
OPT="$(OPT)" \
SO="$(SO)" \
LDSHARED="$(LDSHARED)" \
CCSHARED="$(CCSHARED)" \
LINKFORSHARED="$(LINKFORSHARED)" \
DESTSHARED="$(DESTSHARED)" \
sharedinstall
# Build the sub-Makefiles
Makefiles: config.status Modules/Makefile.pre
(cd Modules; $(MAKE) -f Makefile.pre Makefile)
@for i in . $(SUBDIRS); do \
(echo making Makefile in subdirectory $$i; cd $$i; \
$(MAKE) Makefile); \
done
# Build the intermediate Makefile in Modules
Modules/Makefile.pre: config.status
$(SHELL) config.status
# Build the toplevel Makefile
Makefile: Makefile.in config.status
CONFIG_FILES=Makefile CONFIG_HEADERS= $(SHELL) config.status
# Run the configure script. If config.status already exists,
# call it with the --recheck argument, which reruns configure with the
# same options as it was run last time; otherwise run the configure
# script with options taken from the $(WITH) variable
config.status: $(srcdir)/configure
if test -f config.status; \
then $(SHELL) config.status --recheck; \
$(SHELL) config.status; \
else $(SHELL) $(srcdir)/configure $(WITH); \
fi
.PRECIOUS: config.status python
# Rerun configure with the same options as it was run last time,
# provided the config.status script exists
recheck:
$(SHELL) config.status --recheck
$(SHELL) config.status
# Rebuild the configure script from configure.in; also rebuild config.h.in
autoconf:
(cd $(srcdir); autoconf; autoheader)
# Create a tags file for vi
tags::
ctags -w -t Include/*.h
for i in $(SUBDIRS); do ctags -w -t -a $$i/*.[ch]; done
sort tags -o tags
# Create a tags file for GNU Emacs
TAGS::
etags Include/*.h
for i in $(SUBDIRS); do etags -a $$i/*.[ch]; done
# Add dependencies to sub-Makefiles
depend:
@for i in $(SUBDIRS); do \
(echo making depend in subdirectory $$i; cd $$i; \
$(MAKE) depend); \
done
# Sanitation targets -- clean leaves libraries, executables and tags
# files, which clobber removes those as well
localclean:
-rm -f core *~ [@,#]* *.old *.orig *.rej
clean: localclean
-for i in $(SUBDIRS); do \
(echo making clean in subdirectory $$i; cd $$i; \
if test -f Makefile; \
then $(MAKE) clean; \
else $(MAKE) -f Makefile.*in clean; \
fi); \
done
localclobber: localclean
-rm -f tags TAGS python
-rm -f config.log config.cache config.h
clobber: localclobber
-for i in $(SUBDIRS); do \
(echo clobbering subdirectory $$i; cd $$i; \
if test -f Makefile; \
then $(MAKE) clobber; \
else $(MAKE) -f $(srcdir)/Makefile.in clobber; \
fi); \
done
# Make things extra clean, before making a distribution:
# remove all generated files, even Makefile[.pre]
distclean: clobber
-$(MAKE) -f $(srcdir)/Makefile.in \
SUBDIRS="$(SUBDIRSTOO)" clobber
-rm -f config.status config.log config.cache config.h Makefile
-rm -f Modules/Makefile
-for i in $(SUBDIRS) $(SUBDIRSTOO); do \
for f in $$i/*.in; do \
f=`basename "$$f" .in`; \
if test "$$f" != "*"; then \
echo rm -f "$$i/$$f"; \
rm -f "$$i/$$f"; \
fi; \
done; \
done
# Check for smelly exported symbols (not starting with Py/_Py)
smelly: all
for i in $(SUBDIRS); do \
echo --- $$i ---; \
nm -p $$i/lib$$i.a | \
sed -n "/ [TDB] /s/.* //p" | grep -v "^_*Py" | sort -u; \
done
# Find files with funny names
funny:
find $(DISTDIRS) -type d \
-o -name '*.[chs]' \
-o -name '*.py' \
-o -name '*.doc' \
-o -name '*.sty' \
-o -name '*.bib' \
-o -name '*.dat' \
-o -name '*.el' \
-o -name '*.fd' \
-o -name '*.in' \
-o -name '*.tex' \
-o -name '*,[vpt]' \
-o -name 'Setup' \
-o -name 'Setup.*' \
-o -name README \
-o -name Makefile \
-o -name ChangeLog \
-o -name Repository \
-o -name Root \
-o -name Entries \
-o -name Tag \
-o -name tags \
-o -name TAGS \
-o -name .cvsignore \
-o -name MANIFEST \
-o -print