* change bsv file suffix to replay, update strings
* add trivial RPLY block to save states
* WIP rerecording support, doesn't load states properly yet--issue with checking identifiers?
* Fixed a type error to get time identifiers working right, ready for testing
* handle case where state without replay data is loaded during replay
* cleanups
* whitespace cleanup
* Cleanups, change replay file format magic, fix logic around future states
* Remove failed future message
* Add play-replay-from-slot command, fix load-state-from-slot to use given slot
* build fixes
* Fix race conditions in emscripten build and incorrect replay state incrementing
* Style fix for single line if
---------
Co-authored-by: Joseph C. Osborn <jcoa2018@pomona.edu>
* Add bsv replay controls (not yet fully implemented), remove toggle
see notes in task_movie.c, make sure command.c calls the right
functions, check retroarch.c and other todos.
bsv files are also now stored with states, not saves.
* Compilation fixes
* Added command impls for play and record replay, and some code in load state to do the right thing there
* Guard some parts of the new code with HAVE_BSV_MOVIE
* wip, menu fixes
* more menu fixes, osd for movie errors, halt recording properly
* Menu and label fixes
* move bsvs to own file suffix series under savestates, fix recording and playback command validity checks
* Fix replay autoincrement
* fix endif placement, whoops
---------
Co-authored-by: Joseph C. Osborn <jcoa2018@pomona.edu>
* Allow for both -e and -R to start a BSV file recording at a state
The key issue is that loading a state takes some time, and the BSV
recording shouldn't start until that's done.
The minimal patch for this would just be a change to runloop.c which
moves movie initialization after entry state loading, throwing in a
task_queue_wait(). This makes for some awkward repeated autoload OSD
messages and doesn't solve the underlying issue.
Most of this change puts BSV recording start/stop into tasks, like
saving and loading are tasks; this was important to centralize BSV
operations a bit more and is the first part of a refactoring towards
more robust input recording. The necessary wait is introduced in the
begin-recording callback.
Co-authored-by: Joseph C. Osborn <jcoa2018@pomona.edu>
- New descriptors: 'dpad_area' and 'abxy_area'
- Each has a diagonal sensitivity setting, 100% being 8-way symmetry
- Buttons can be redefined in the cfg file
E.g. This would create a d-pad area, then redefine it to use analog directions:
overlay0_desc0 = "dpad_area,0.85,0.57,rect,0.166228,0.295516"
overlay0_desc0_up = "r_y_minus"
overlay0_desc0_down = "r_y_plus"
overlay0_desc0_left = "r_x_minus"
overlay0_desc0_right = "r_x_plus"
* Netplay Stuff
## PROTOCOL FALLBACK
In order to support older clients a protocol fallback system was introduced.
The host will no longer send its header automatically after a TCP connection is established, instead, it awaits for the client to send his before determining which protocol this connection is going to operate on.
Netplay has now two protocols, a low protocol and a high protocol; the low protocol is the minimum protocol it supports, while the high protocol is the highest protocol it can operate on.
To fully support older clients, a hack was necessary: sending the high protocol in the unused client's header salt field, while keeping the protocol field to the low protocol. Without this hack we would only be able to support older clients if a newer client was the host.
Any future system can make use of this system by checking connection->netplay_protocol, which is available for both the client and host.
## NETPLAY CHAT
Starting with protocol 6, netplay chat is available through the new NETPLAY_CMD_PLAYER_CHAT command.
Limitations of the command code, which causes a disconnection on unknown commands, makes this system not possible on protocol 5.
Protocol 5 connections can neither send nor receive chat, but other netplay operations are unaffected.
Clients send chat as a string to the server, and it's the server's sole responsability to relay chat messages.
As of now, sending chat uses RetroArch's input menu, while the display of on-screen chat uses a widget overlay and RetroArch's notifications as a fallback.
If a new overlay and/or input system is desired, no backwards compatibility changes need to be made.
Only clients in playing mode (as opposed to spectating mode) can send and receive chat.
## SETTINGS SHARING
Some settings are better used when both host and clients share the same configuration.
As of protocol 6, the following settings will be shared from host to clients (without altering a client's configuration file): input latency frames and allow pausing.
## NETPLAY TUNNEL/MITM
With the current MITM system being defunct (at least as of 1.9.X), a new system was in order to solve most if not all of the problems with the current system.
This new system uses a tunneling approach, which is similar to most VPN and tunneling services around.
Tunnel commands:
RATS[unique id] (RetroArch Tunnel Session) - 16 bytes -> When this command is sent with a zeroed unique id, the tunnel server interprets this as a netplay host wanting to create a new session, in this case, the same command is returned to the host, but now with its unique session id. When a client needs to connect to a host, this command is sent with the unique session id of the host, causing the tunnel server to send a RATL command to the host.
RATL[unique id] (RetroArch Tunnel Link) - 16 bytes -> The tunnel server sends this command to the host when a client wants to connect to the host. Once the host receives this command, it establishes a new connection to the tunnel server, sending this command together with the client's unique id through this new connection, causing the tunnel server to link this connection to the connection of the client.
RATP (RetroArch Tunnel Ping) - 4 bytes -> The tunnel server sends this command to verify that the host, whom the session belongs to, is still around. The host replies with the same command. A session is closed if the tunnel server can not verify that the host is alive.
Operations:
Host -> Instead of listening and accepting connections, it connects to the tunnel server, requests a new session and then monitor this connection for new linking requests. Once a request is received, it establishes a new connection to the tunnel server for linking with a client. The tunnel server's address and port are obtained by querying the lobby server. The host will publish its session id together with the rest of its info to the lobby server.
Client -> It connects to the tunnel server and then sends the session id of the host it wants to connect to. A host's session id is obtained from the json data sent by the lobby server.
Improvements (from current MITM system):
No longer a risk of TCP port exhaustion; we only use one port now at the tunnel server.
Very little cpu usage. About 95% net I/O bound now.
Future backwards compatible with any and all changes to netplay as it no longer runs any netplay logic at MITM servers.
No longer operates the host in client mode, which was a source of many of the current problems.
Cleaner and more maintainable system and code.
Notable functions:
netplay_mitm_query -> Grabs the tunnel's address and port from the lobby server.
init_tcp_socket -> Handles the creation and operation mode of the TCP socket based on whether it's host, host+MITM or client.
handle_mitm_connection -> Creates and completes linking connections and replies to ping commands (only 1 of each per call to not affect performance).
## MISC
Ping Limiter: If a client's estimated latency to the server is higher than this value, connection will be dropped just before finishing the netplay handshake.
Ping Counter: A ping counter (similar to the FPS one) can be shown in the bottom right corner of the screen, if you are connected to a host.
LAN Discovery: Refactored and moved to its own "Refresh Netplay LAN List" button.
## FIXES
Many minor fixes to the current netplay implementation are also included.
* Remove NETPLAY_TEST_BUILD
* (3DS) Add bottom screen menu
-> User can save/load state on botom screen with thumbnail.
-> Call a save_state_to_file() when RAM state has data to write a disk.
-> If the bottom screen needs updating, swap the bottom framebuffers.
Add: SAVE/LODE STATE TO RAM
-> This is useful for devices with slow I/O
-> 3DS bottom save state use CMD_EVENT_SAVE_STATE_TO_RAM
-> 3DS bottom load state use CMD_EVENT_LOAD_STATE when RAM state has no data
-> 3DS bottom load state use CMD_EVENT_LOAD_STATE_FROM_RAM when RAM sate has data
* Rewrite path_get_state to retroarch_get_current_savestate_path
* Fix unterminated state_path
* (OSX non-Metal build) Set disable execute page protection
* Rewrite commands and add new command type
This moves commands to a separate file and creates a consistent
interface for them. It is now possible to use multiple command
interfaces simultaneously (stdin, network and UDS).
Implemented a new interface for Lakka, UDS based (so Linux only). This
allow other Lakka servies to send certain commands to Retroarch in a
secure and reliable way.
Co-authored-by: twinaphex <libretro@gmail.com>
