git/t/perf/perf-lib.sh
René Scharfe ee1431bfc5 MALLOC_CHECK: enable it, unless disabled explicitly
The malloc checks in tests are currently disabled.  Actually evaluate
the variable for turning them off and enable them if it's unset.

Also use this opportunity to give it the more descriptive and
consistent name TEST_NO_MALLOC_CHECK.

Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-09-26 23:39:13 -07:00

204 lines
5.5 KiB
Bash

#!/bin/sh
#
# Copyright (c) 2011 Thomas Rast
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see http://www.gnu.org/licenses/ .
# do the --tee work early; it otherwise confuses our careful
# GIT_BUILD_DIR mangling
case "$GIT_TEST_TEE_STARTED, $* " in
done,*)
# do not redirect again
;;
*' --tee '*|*' --va'*)
mkdir -p test-results
BASE=test-results/$(basename "$0" .sh)
(GIT_TEST_TEE_STARTED=done ${SHELL-sh} "$0" "$@" 2>&1;
echo $? > $BASE.exit) | tee $BASE.out
test "$(cat $BASE.exit)" = 0
exit
;;
esac
TEST_DIRECTORY=$(pwd)/..
TEST_OUTPUT_DIRECTORY=$(pwd)
if test -z "$GIT_TEST_INSTALLED"; then
perf_results_prefix=
else
perf_results_prefix=$(printf "%s" "${GIT_TEST_INSTALLED%/bin-wrappers}" | tr -c "[a-zA-Z0-9]" "[_*]")"."
# make the tested dir absolute
GIT_TEST_INSTALLED=$(cd "$GIT_TEST_INSTALLED" && pwd)
fi
TEST_NO_CREATE_REPO=t
TEST_NO_MALLOC_CHECK=t
. ../test-lib.sh
# Variables from test-lib that are normally internal to the tests; we
# need to export them for test_perf subshells
export TEST_DIRECTORY TRASH_DIRECTORY GIT_BUILD_DIR GIT_TEST_CMP
perf_results_dir=$TEST_OUTPUT_DIRECTORY/test-results
mkdir -p "$perf_results_dir"
rm -f "$perf_results_dir"/$(basename "$0" .sh).subtests
if test -z "$GIT_PERF_REPEAT_COUNT"; then
GIT_PERF_REPEAT_COUNT=3
fi
die_if_build_dir_not_repo () {
if ! ( cd "$TEST_DIRECTORY/.." &&
git rev-parse --build-dir >/dev/null 2>&1 ); then
error "No $1 defined, and your build directory is not a repo"
fi
}
if test -z "$GIT_PERF_REPO"; then
die_if_build_dir_not_repo '$GIT_PERF_REPO'
GIT_PERF_REPO=$TEST_DIRECTORY/..
fi
if test -z "$GIT_PERF_LARGE_REPO"; then
die_if_build_dir_not_repo '$GIT_PERF_LARGE_REPO'
GIT_PERF_LARGE_REPO=$TEST_DIRECTORY/..
fi
test_perf_create_repo_from () {
test "$#" = 2 ||
error "bug in the test script: not 2 parameters to test-create-repo"
repo="$1"
source="$2"
source_git=$source/$(cd "$source" && git rev-parse --git-dir)
mkdir -p "$repo/.git"
(
cd "$repo/.git" &&
{ cp -Rl "$source_git/objects" . 2>/dev/null ||
cp -R "$source_git/objects" .; } &&
for stuff in "$source_git"/*; do
case "$stuff" in
*/objects|*/hooks|*/config)
;;
*)
cp -R "$stuff" . || break
;;
esac
done &&
cd .. &&
git init -q &&
mv .git/hooks .git/hooks-disabled 2>/dev/null
) || error "failed to copy repository '$source' to '$repo'"
}
# call at least one of these to establish an appropriately-sized repository
test_perf_default_repo () {
test_perf_create_repo_from "${1:-$TRASH_DIRECTORY}" "$GIT_PERF_REPO"
}
test_perf_large_repo () {
if test "$GIT_PERF_LARGE_REPO" = "$GIT_BUILD_DIR"; then
echo "warning: \$GIT_PERF_LARGE_REPO is \$GIT_BUILD_DIR." >&2
echo "warning: This will work, but may not be a sufficiently large repo" >&2
echo "warning: for representative measurements." >&2
fi
test_perf_create_repo_from "${1:-$TRASH_DIRECTORY}" "$GIT_PERF_LARGE_REPO"
}
test_checkout_worktree () {
git checkout-index -u -a ||
error "git checkout-index failed"
}
# Performance tests should never fail. If they do, stop immediately
immediate=t
test_run_perf_ () {
test_cleanup=:
test_export_="test_cleanup"
export test_cleanup test_export_
/usr/bin/time -f "%E %U %S" -o test_time.$i "$SHELL" -c '
. '"$TEST_DIRECTORY"/test-lib-functions.sh'
test_export () {
[ $# != 0 ] || return 0
test_export_="$test_export_\\|$1"
shift
test_export "$@"
}
'"$1"'
ret=$?
set | sed -n "s'"/'/'\\\\''/g"';s/^\\($test_export_\\)/export '"'&'"'/p" >test_vars
exit $ret' >&3 2>&4
eval_ret=$?
if test $eval_ret = 0 || test -n "$expecting_failure"
then
test_eval_ "$test_cleanup"
. ./test_vars || error "failed to load updated environment"
fi
if test "$verbose" = "t" && test -n "$HARNESS_ACTIVE"; then
echo ""
fi
return "$eval_ret"
}
test_perf () {
test "$#" = 3 && { test_prereq=$1; shift; } || test_prereq=
test "$#" = 2 ||
error "bug in the test script: not 2 or 3 parameters to test-expect-success"
export test_prereq
if ! test_skip "$@"
then
base=$(basename "$0" .sh)
echo "$test_count" >>"$perf_results_dir"/$base.subtests
echo "$1" >"$perf_results_dir"/$base.$test_count.descr
if test -z "$verbose"; then
echo -n "perf $test_count - $1:"
else
echo "perf $test_count - $1:"
fi
for i in $(test_seq 1 $GIT_PERF_REPEAT_COUNT); do
say >&3 "running: $2"
if test_run_perf_ "$2"
then
if test -z "$verbose"; then
echo -n " $i"
else
echo "* timing run $i/$GIT_PERF_REPEAT_COUNT:"
fi
else
test -z "$verbose" && echo
test_failure_ "$@"
break
fi
done
if test -z "$verbose"; then
echo " ok"
else
test_ok_ "$1"
fi
base="$perf_results_dir"/"$perf_results_prefix$(basename "$0" .sh)"."$test_count"
"$TEST_DIRECTORY"/perf/min_time.perl test_time.* >"$base".times
fi
echo >&3 ""
}
# We extend test_done to print timings at the end (./run disables this
# and does it after running everything)
test_at_end_hook_ () {
if test -z "$GIT_PERF_AGGREGATING_LATER"; then
( cd "$TEST_DIRECTORY"/perf && ./aggregate.perl $(basename "$0") )
fi
}
test_export () {
export "$@"
}