development/git
development/git
1
0
Fork 0
mirror of https://github.com/git/git synced 2024-10-30 04:01:21 +00:00
Code Issues Projects Releases Packages Wiki Activity
git/t/t7300-clean.sh
Elijah Newren 22705334b9 dir: treat_leading_path() and read_directory_recursive(), round 2 
I was going to title this "dir: more synchronizing of
treat_leading_path() and read_directory_recursive()", a nod to commit
777b420347 ("dir: synchronize treat_leading_path() and
read_directory_recursive()", 2019-12-19), but the title was too long.

Anyway, first the backstory...

fill_directory() has always had a slightly error-prone interface: it
returns a subset of paths which *might* match the specified pathspec; it
was intended to prune away some paths which didn't match the specified
pathspec and keep at least all the ones that did match it.  Given this
interface, callers were responsible to post-process the results and
check whether each actually matched the pathspec.

builtin/clean.c did this.  It would first prune out duplicates (e.g. if
"dir" was returned as well as all files under "dir/", then it would
simplify this to just "dir"), and after pruning duplicates it would
compare the remaining paths to the specified pathspec(s).  This
post-processing itself could run into problems, though, as noted in
commit 404ebceda0 ("dir: also check directories for matching
pathspecs", 2019-09-17):

    For the case of git-clean and a set of pathspecs of "dir/file" and
    "more", this caused a problem because we'd end up with dir entries
    for both of
      "dir"
      "dir/file"
    Then correct_untracked_entries() would try to helpfully prune
    duplicates for us by removing "dir/file" since it's under "dir",
    leaving us with
      "dir"
    Since the original pathspec only had "dir/file", the only entry left
    doesn't match and leaves nothing to be removed.  (Note that if only
    one pathspec was specified, e.g. only "dir/file", then the
    common_prefix_len optimizations in fill_directory would cause us to
    bypass this problem, making it appear in simple tests that we could
    correctly remove manually specified pathspecs.)

That commit fixed the issue -- when multiple pathspecs were specified --
by making sure fill_directory() wouldn't return both "dir" and
"dir/file" outside the common_prefix_len optimization path.  This is
where it starts to get fun.

In commit b9670c1f5e ("dir: fix checks on common prefix directory",
2019-12-19), we noticed that the common_prefix_len wasn't doing
appropriate checks and letting all kinds of stuff through, resulting in
recursing into .git/ directories and other craziness.  So it started
locking down and doing checks on pathnames within that code path.  That
continued with commit 777b420347 ("dir: synchronize
treat_leading_path() and read_directory_recursive()", 2019-12-19), which
noted the following:

    Our optimization to avoid calling into read_directory_recursive()
    when all pathspecs have a common leading directory mean that we need
    to match the logic that read_directory_recursive() would use if we
    had just called it from the root.  Since it does more than call
    treat_path() we need to copy that same logic.

...and then it more forcefully addressed the issue with this wonderfully
ironic statement:

    Needing to duplicate logic like this means it is guaranteed someone
    will eventually need to make further changes and forget to update
    both locations.  It is tempting to just nuke the leading_directory
    special casing to avoid such bugs and simplify the code, but
    unpack_trees' verify_clean_subdirectory() also calls
    read_directory() and does so with a non-empty leading path, so I'm
    hesitant to try to restructure further.  Add obnoxious warnings to
    treat_leading_path() and read_directory_recursive() to try to warn
    people of such problems.

You would think that with such a strongly worded description, that its
author would have actually ensured that the logic in
treat_leading_path() and read_directory_recursive() did actually match
and that *everything* that was needed had at least been copied over at
the time that this paragraph was written.  But you'd be wrong, I messed
it up by missing part of the logic.

Copy the missing bits to fix the new final test in t7300.

Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-01-16 12:56:13 -08:00

749 lines
17 KiB
Bash
Executable file
Raw Blame History

#!/bin/sh
#
# Copyright (c) 2007 Michael Spang
#
test_description='git clean basic tests'
. ./test-lib.sh
git config clean.requireForce no
test_expect_success 'setup' '
mkdir -p src &&
touch src/part1.c Makefile &&
echo build >.gitignore &&
echo \*.o >>.gitignore &&
git add . &&
git commit -m setup &&
touch src/part2.c README &&
git add .
'
test_expect_success 'git clean with skip-worktree .gitignore' '
git update-index --skip-worktree .gitignore &&
rm .gitignore &&
mkdir -p build docs &&
touch a.out src/part3.c docs/manual.txt obj.o build/lib.so &&
git clean &&
test -f Makefile &&
test -f README &&
test -f src/part1.c &&
test -f src/part2.c &&
test ! -f a.out &&
test ! -f src/part3.c &&
test -f docs/manual.txt &&
test -f obj.o &&
test -f build/lib.so &&
git update-index --no-skip-worktree .gitignore &&
git checkout .gitignore
'
test_expect_success 'git clean' '
mkdir -p build docs &&
touch a.out src/part3.c docs/manual.txt obj.o build/lib.so &&
git clean &&
test -f Makefile &&
test -f README &&
test -f src/part1.c &&
test -f src/part2.c &&
test ! -f a.out &&
test ! -f src/part3.c &&
test -f docs/manual.txt &&
test -f obj.o &&
test -f build/lib.so
'
test_expect_success 'git clean src/' '
mkdir -p build docs &&
touch a.out src/part3.c docs/manual.txt obj.o build/lib.so &&
git clean src/ &&
test -f Makefile &&
test -f README &&
test -f src/part1.c &&
test -f src/part2.c &&
test -f a.out &&
test ! -f src/part3.c &&
test -f docs/manual.txt &&
test -f obj.o &&
test -f build/lib.so
'
test_expect_success 'git clean src/ src/' '
mkdir -p build docs &&
touch a.out src/part3.c docs/manual.txt obj.o build/lib.so &&
git clean src/ src/ &&
test -f Makefile &&
test -f README &&
test -f src/part1.c &&
test -f src/part2.c &&
test -f a.out &&
test ! -f src/part3.c &&
test -f docs/manual.txt &&
test -f obj.o &&
test -f build/lib.so
'
test_expect_success 'git clean with prefix' '
mkdir -p build docs src/test &&
touch a.out src/part3.c docs/manual.txt obj.o build/lib.so src/test/1.c &&
(cd src/ && git clean) &&
test -f Makefile &&
test -f README &&
test -f src/part1.c &&
test -f src/part2.c &&
test -f a.out &&
test ! -f src/part3.c &&
test -f src/test/1.c &&
test -f docs/manual.txt &&
test -f obj.o &&
test -f build/lib.so
'
test_expect_success C_LOCALE_OUTPUT 'git clean with relative prefix' '
mkdir -p build docs &&
touch a.out src/part3.c docs/manual.txt obj.o build/lib.so &&
would_clean=$(
cd docs &&
git clean -n ../src |
grep part3 |
sed -n -e "s|^Would remove ||p"
) &&
verbose test "$would_clean" = ../src/part3.c
'
test_expect_success C_LOCALE_OUTPUT 'git clean with absolute path' '
mkdir -p build docs &&
touch a.out src/part3.c docs/manual.txt obj.o build/lib.so &&
would_clean=$(
cd docs &&
git clean -n "$(pwd)/../src" |
grep part3 |
sed -n -e "s|^Would remove ||p"
) &&
verbose test "$would_clean" = ../src/part3.c
'
test_expect_success 'git clean with out of work tree relative path' '
mkdir -p build docs &&
touch a.out src/part3.c docs/manual.txt obj.o build/lib.so &&
(
cd docs &&
test_must_fail git clean -n ../..
)
'
test_expect_success 'git clean with out of work tree absolute path' '
mkdir -p build docs &&
touch a.out src/part3.c docs/manual.txt obj.o build/lib.so &&
dd=$(cd .. && pwd) &&
(
cd docs &&
test_must_fail git clean -n $dd
)
'
test_expect_success 'git clean -d with prefix and path' '
mkdir -p build docs src/feature &&
touch a.out src/part3.c src/feature/file.c docs/manual.txt obj.o build/lib.so &&
(cd src/ && git clean -d feature/) &&
test -f Makefile &&
test -f README &&
test -f src/part1.c &&
test -f src/part2.c &&
test -f a.out &&
test -f src/part3.c &&
test ! -f src/feature/file.c &&
test -f docs/manual.txt &&
test -f obj.o &&
test -f build/lib.so
'
test_expect_success SYMLINKS 'git clean symbolic link' '
mkdir -p build docs &&
touch a.out src/part3.c docs/manual.txt obj.o build/lib.so &&
ln -s docs/manual.txt src/part4.c &&
git clean &&
test -f Makefile &&
test -f README &&
test -f src/part1.c &&
test -f src/part2.c &&
test ! -f a.out &&
test ! -f src/part3.c &&
test ! -f src/part4.c &&
test -f docs/manual.txt &&
test -f obj.o &&
test -f build/lib.so
'
test_expect_success 'git clean with wildcard' '
touch a.clean b.clean other.c &&
git clean "*.clean" &&
test -f Makefile &&
test -f README &&
test -f src/part1.c &&
test -f src/part2.c &&
test ! -f a.clean &&
test ! -f b.clean &&
test -f other.c
'
test_expect_success 'git clean -n' '
mkdir -p build docs &&
touch a.out src/part3.c docs/manual.txt obj.o build/lib.so &&
git clean -n &&
test -f Makefile &&
test -f README &&
test -f src/part1.c &&
test -f src/part2.c &&
test -f a.out &&
test -f src/part3.c &&
test -f docs/manual.txt &&
test -f obj.o &&
test -f build/lib.so
'
test_expect_success 'git clean -d' '
mkdir -p build docs &&
touch a.out src/part3.c docs/manual.txt obj.o build/lib.so &&
git clean -d &&
test -f Makefile &&
test -f README &&
test -f src/part1.c &&
test -f src/part2.c &&
test ! -f a.out &&
test ! -f src/part3.c &&
test ! -d docs &&
test -f obj.o &&
test -f build/lib.so
'
test_expect_success 'git clean -d src/ examples/' '
mkdir -p build docs examples &&
touch a.out src/part3.c docs/manual.txt obj.o build/lib.so examples/1.c &&
git clean -d src/ examples/ &&
test -f Makefile &&
test -f README &&
test -f src/part1.c &&
test -f src/part2.c &&
test -f a.out &&
test ! -f src/part3.c &&
test ! -f examples/1.c &&
test -f docs/manual.txt &&
test -f obj.o &&
test -f build/lib.so
'
test_expect_success 'git clean -x' '
mkdir -p build docs &&
touch a.out src/part3.c docs/manual.txt obj.o build/lib.so &&
git clean -x &&
test -f Makefile &&
test -f README &&
test -f src/part1.c &&
test -f src/part2.c &&
test ! -f a.out &&
test ! -f src/part3.c &&
test -f docs/manual.txt &&
test ! -f obj.o &&
test -f build/lib.so
'
test_expect_success 'git clean -d -x' '
mkdir -p build docs &&
touch a.out src/part3.c docs/manual.txt obj.o build/lib.so &&
git clean -d -x &&
test -f Makefile &&
test -f README &&
test -f src/part1.c &&
test -f src/part2.c &&
test ! -f a.out &&
test ! -f src/part3.c &&
test ! -d docs &&
test ! -f obj.o &&
test ! -d build
'
test_expect_success 'git clean -d -x with ignored tracked directory' '
mkdir -p build docs &&
touch a.out src/part3.c docs/manual.txt obj.o build/lib.so &&
git clean -d -x -e src &&
test -f Makefile &&
test -f README &&
test -f src/part1.c &&
test -f src/part2.c &&
test ! -f a.out &&
test -f src/part3.c &&
test ! -d docs &&
test ! -f obj.o &&
test ! -d build
'
test_expect_success 'git clean -X' '
mkdir -p build docs &&
touch a.out src/part3.c docs/manual.txt obj.o build/lib.so &&
git clean -X &&
test -f Makefile &&
test -f README &&
test -f src/part1.c &&
test -f src/part2.c &&
test -f a.out &&
test -f src/part3.c &&
test -f docs/manual.txt &&
test ! -f obj.o &&
test -f build/lib.so
'
test_expect_success 'git clean -d -X' '
mkdir -p build docs &&
touch a.out src/part3.c docs/manual.txt obj.o build/lib.so &&
git clean -d -X &&
test -f Makefile &&
test -f README &&
test -f src/part1.c &&
test -f src/part2.c &&
test -f a.out &&
test -f src/part3.c &&
test -f docs/manual.txt &&
test ! -f obj.o &&
test ! -d build
'
test_expect_success 'git clean -d -X with ignored tracked directory' '
mkdir -p build docs &&
touch a.out src/part3.c docs/manual.txt obj.o build/lib.so &&
git clean -d -X -e src &&
test -f Makefile &&
test -f README &&
test -f src/part1.c &&
test -f src/part2.c &&
test -f a.out &&
test ! -f src/part3.c &&
test -f docs/manual.txt &&
test ! -f obj.o &&
test ! -d build
'
test_expect_success 'clean.requireForce defaults to true' '
git config --unset clean.requireForce &&
test_must_fail git clean
'
test_expect_success 'clean.requireForce' '
git config clean.requireForce true &&
test_must_fail git clean
'
test_expect_success 'clean.requireForce and -n' '
mkdir -p build docs &&
touch a.out src/part3.c docs/manual.txt obj.o build/lib.so &&
git clean -n &&
test -f Makefile &&
test -f README &&
test -f src/part1.c &&
test -f src/part2.c &&
test -f a.out &&
test -f src/part3.c &&
test -f docs/manual.txt &&
test -f obj.o &&
test -f build/lib.so
'
test_expect_success 'clean.requireForce and -f' '
git clean -f &&
test -f README &&
test -f src/part1.c &&
test -f src/part2.c &&
test ! -f a.out &&
test ! -f src/part3.c &&
test -f docs/manual.txt &&
test -f obj.o &&
test -f build/lib.so
'
test_expect_success C_LOCALE_OUTPUT 'core.excludesfile' '
echo excludes >excludes &&
echo included >included &&
git config core.excludesfile excludes &&
output=$(git clean -n excludes included 2>&1) &&
expr "$output" : ".*included" >/dev/null &&
! expr "$output" : ".*excludes" >/dev/null
'
test_expect_success SANITY 'removal failure' '
mkdir foo &&
touch foo/bar &&
test_when_finished "chmod 755 foo" &&
(exec <foo/bar &&
chmod 0 foo &&
test_must_fail git clean -f -d)
'
test_expect_success 'nested git work tree' '
rm -fr foo bar baz &&
mkdir -p foo bar baz/boo &&
(
cd foo &&
git init &&
test_commit nested hello.world
) &&
(
cd bar &&
>goodbye.people
) &&
(
cd baz/boo &&
git init &&
test_commit deeply.nested deeper.world
) &&
git clean -f -d &&
test -f foo/.git/index &&
test -f foo/hello.world &&
test -f baz/boo/.git/index &&
test -f baz/boo/deeper.world &&
! test -d bar
'
test_expect_success 'should clean things that almost look like git but are not' '
rm -fr almost_git almost_bare_git almost_submodule &&
mkdir -p almost_git/.git/objects &&
mkdir -p almost_git/.git/refs &&
cat >almost_git/.git/HEAD <<-\EOF &&
garbage
EOF
cp -r almost_git/.git/ almost_bare_git &&
mkdir almost_submodule/ &&
cat >almost_submodule/.git <<-\EOF &&
garbage
EOF
test_when_finished "rm -rf almost_*" &&
git clean -f -d &&
test_path_is_missing almost_git &&
test_path_is_missing almost_bare_git &&
test_path_is_missing almost_submodule
'
test_expect_success 'should not clean submodules' '
rm -fr repo to_clean sub1 sub2 &&
mkdir repo to_clean &&
(
cd repo &&
git init &&
test_commit msg hello.world
) &&
git submodule add ./repo/.git sub1 &&
git commit -m "sub1" &&
git branch before_sub2 &&
git submodule add ./repo/.git sub2 &&
git commit -m "sub2" &&
git checkout before_sub2 &&
>to_clean/should_clean.this &&
git clean -f -d &&
test_path_is_file repo/.git/index &&
test_path_is_file repo/hello.world &&
test_path_is_file sub1/.git &&
test_path_is_file sub1/hello.world &&
test_path_is_file sub2/.git &&
test_path_is_file sub2/hello.world &&
test_path_is_missing to_clean
'
test_expect_success POSIXPERM,SANITY 'should avoid cleaning possible submodules' '
rm -fr to_clean possible_sub1 &&
mkdir to_clean possible_sub1 &&
test_when_finished "rm -rf possible_sub*" &&
echo "gitdir: foo" >possible_sub1/.git &&
>possible_sub1/hello.world &&
chmod 0 possible_sub1/.git &&
>to_clean/should_clean.this &&
git clean -f -d &&
test_path_is_file possible_sub1/.git &&
test_path_is_file possible_sub1/hello.world &&
test_path_is_missing to_clean
'
test_expect_success 'nested (empty) git should be kept' '
rm -fr empty_repo to_clean &&
git init empty_repo &&
mkdir to_clean &&
>to_clean/should_clean.this &&
git clean -f -d &&
test_path_is_file empty_repo/.git/HEAD &&
test_path_is_missing to_clean
'
test_expect_success 'nested bare repositories should be cleaned' '
rm -fr bare1 bare2 subdir &&
git init --bare bare1 &&
git clone --local --bare . bare2 &&
mkdir subdir &&
cp -r bare2 subdir/bare3 &&
git clean -f -d &&
test_path_is_missing bare1 &&
test_path_is_missing bare2 &&
test_path_is_missing subdir
'
test_expect_failure 'nested (empty) bare repositories should be cleaned even when in .git' '
rm -fr strange_bare &&
mkdir strange_bare &&
git init --bare strange_bare/.git &&
git clean -f -d &&
test_path_is_missing strange_bare
'
test_expect_failure 'nested (non-empty) bare repositories should be cleaned even when in .git' '
rm -fr strange_bare &&
mkdir strange_bare &&
git clone --local --bare . strange_bare/.git &&
git clean -f -d &&
test_path_is_missing strange_bare
'
test_expect_success 'giving path in nested git work tree will NOT remove it' '
rm -fr repo &&
mkdir repo &&
(
cd repo &&
git init &&
mkdir -p bar/baz &&
test_commit msg bar/baz/hello.world
) &&
git clean -f -d repo/bar/baz &&
test_path_is_file repo/.git/HEAD &&
test_path_is_dir repo/bar/ &&
test_path_is_file repo/bar/baz/hello.world
'
test_expect_success 'giving path to nested .git will not remove it' '
rm -fr repo &&
mkdir repo untracked &&
(
cd repo &&
git init &&
test_commit msg hello.world
) &&
git clean -f -d repo/.git &&
test_path_is_file repo/.git/HEAD &&
test_path_is_dir repo/.git/refs &&
test_path_is_dir repo/.git/objects &&
test_path_is_dir untracked/
'
test_expect_success 'giving path to nested .git/ will NOT remove contents' '
rm -fr repo untracked &&
mkdir repo untracked &&
(
cd repo &&
git init &&
test_commit msg hello.world
) &&
git clean -f -d repo/.git/ &&
test_path_is_dir repo/.git &&
test_path_is_file repo/.git/HEAD &&
test_path_is_dir untracked/
'
test_expect_success 'force removal of nested git work tree' '
rm -fr foo bar baz &&
mkdir -p foo bar baz/boo &&
(
cd foo &&
git init &&
test_commit nested hello.world
) &&
(
cd bar &&
>goodbye.people
) &&
(
cd baz/boo &&
git init &&
test_commit deeply.nested deeper.world
) &&
git clean -f -f -d &&
! test -d foo &&
! test -d bar &&
! test -d baz
'
test_expect_success 'git clean -e' '
rm -fr repo &&
mkdir repo &&
(
cd repo &&
git init &&
touch known 1 2 3 &&
git add known &&
git clean -f -e 1 -e 2 &&
test -e 1 &&
test -e 2 &&
! (test -e 3) &&
test -e known
)
'
test_expect_success SANITY 'git clean -d with an unreadable empty directory' '
mkdir foo &&
chmod a= foo &&
git clean -dfx foo &&
! test -d foo
'
test_expect_success 'git clean -d respects pathspecs (dir is prefix of pathspec)' '
mkdir -p foo &&
mkdir -p foobar &&
git clean -df foobar &&
test_path_is_dir foo &&
test_path_is_missing foobar
'
test_expect_success 'git clean -d respects pathspecs (pathspec is prefix of dir)' '
mkdir -p foo &&
mkdir -p foobar &&
git clean -df foo &&
test_path_is_missing foo &&
test_path_is_dir foobar
'
test_expect_success 'git clean -d skips untracked dirs containing ignored files' '
echo /foo/bar >.gitignore &&
echo ignoreme >>.gitignore &&
rm -rf foo &&
mkdir -p foo/a/aa/aaa foo/b/bb/bbb &&
touch foo/bar foo/baz foo/a/aa/ignoreme foo/b/ignoreme foo/b/bb/1 foo/b/bb/2 &&
git clean -df &&
test_path_is_dir foo &&
test_path_is_file foo/bar &&
test_path_is_missing foo/baz &&
test_path_is_file foo/a/aa/ignoreme &&
test_path_is_missing foo/a/aa/aaa &&
test_path_is_file foo/b/ignoreme &&
test_path_is_missing foo/b/bb
'
test_expect_success 'git clean -d skips nested repo containing ignored files' '
test_when_finished "rm -rf nested-repo-with-ignored-file" &&
git init nested-repo-with-ignored-file &&
(
cd nested-repo-with-ignored-file &&
>file &&
git add file &&
git commit -m Initial &&
# This file is ignored by a .gitignore rule in the outer repo
# added in the previous test.
>ignoreme
) &&
git clean -fd &&
test_path_is_file nested-repo-with-ignored-file/.git/index &&
test_path_is_file nested-repo-with-ignored-file/ignoreme &&
test_path_is_file nested-repo-with-ignored-file/file
'
test_expect_success 'git clean handles being told what to clean' '
mkdir -p d1 d2 &&
touch d1/ut d2/ut &&
git clean -f */ut &&
test_path_is_missing d1/ut &&
test_path_is_missing d2/ut
'
test_expect_success 'git clean handles being told what to clean, with -d' '
mkdir -p d1 d2 &&
touch d1/ut d2/ut &&
git clean -ffd */ut &&
test_path_is_missing d1/ut &&
test_path_is_missing d2/ut
'
test_expect_success 'git clean works if a glob is passed without -d' '
mkdir -p d1 d2 &&
touch d1/ut d2/ut &&
git clean -f "*ut" &&
test_path_is_missing d1/ut &&
test_path_is_missing d2/ut
'
test_expect_success 'git clean works if a glob is passed with -d' '
mkdir -p d1 d2 &&
touch d1/ut d2/ut &&
git clean -ffd "*ut" &&
test_path_is_missing d1/ut &&
test_path_is_missing d2/ut
'
test_expect_success MINGW 'handle clean & core.longpaths = false nicely' '
test_config core.longpaths false &&
a50=aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa &&
mkdir -p $a50$a50/$a50$a50/$a50$a50 &&
: >"$a50$a50/test.txt" 2>"$a50$a50/$a50$a50/$a50$a50/test.txt" &&
# create a temporary outside the working tree to hide from "git clean"
test_must_fail git clean -xdf 2>.git/err &&
# grepping for a strerror string is unportable but it is OK here with
# MINGW prereq
test_i18ngrep "too long" .git/err
'
test_expect_success 'clean untracked paths by pathspec' '
git init untracked &&
mkdir untracked/dir &&
echo >untracked/dir/file.txt &&
git -C untracked clean -f dir/file.txt &&
ls untracked/dir >actual &&
test_must_be_empty actual
'
test_done
Reference in a new issue View git blame Copy permalink