git/Documentation/git-checkout.txt
Ævar Arnfjörð Bjarmason 8d7b558bae checkout & worktree: introduce checkout.defaultRemote
Introduce a checkout.defaultRemote setting which can be used to
designate a remote to prefer (via checkout.defaultRemote=origin) when
running e.g. "git checkout master" to mean origin/master, even though
there's other remotes that have the "master" branch.

I want this because it's very handy to use this workflow to checkout a
repository and create a topic branch, then get back to a "master" as
retrieved from upstream:

    (
        cd /tmp &&
        rm -rf tbdiff &&
        git clone git@github.com:trast/tbdiff.git &&
        cd tbdiff &&
        git branch -m topic &&
        git checkout master
    )

That will output:

    Branch 'master' set up to track remote branch 'master' from 'origin'.
    Switched to a new branch 'master'

But as soon as a new remote is added (e.g. just to inspect something
from someone else) the DWIMery goes away:

    (
        cd /tmp &&
        rm -rf tbdiff &&
        git clone git@github.com:trast/tbdiff.git &&
        cd tbdiff &&
        git branch -m topic &&
        git remote add avar git@github.com:avar/tbdiff.git &&
        git fetch avar &&
        git checkout master
    )

Will output (without the advice output added earlier in this series):

    error: pathspec 'master' did not match any file(s) known to git.

The new checkout.defaultRemote config allows me to say that whenever
that ambiguity comes up I'd like to prefer "origin", and it'll still
work as though the only remote I had was "origin".

Also adjust the advice.checkoutAmbiguousRemoteBranchName message to
mention this new config setting to the user, the full output on my
git.git is now (the last paragraph is new):

    $ ./git --exec-path=$PWD checkout master
    error: pathspec 'master' did not match any file(s) known to git.
    hint: 'master' matched more than one remote tracking branch.
    hint: We found 26 remotes with a reference that matched. So we fell back
    hint: on trying to resolve the argument as a path, but failed there too!
    hint:
    hint: If you meant to check out a remote tracking branch on, e.g. 'origin',
    hint: you can do so by fully qualifying the name with the --track option:
    hint:
    hint:     git checkout --track origin/<name>
    hint:
    hint: If you'd like to always have checkouts of an ambiguous <name> prefer
    hint: one remote, e.g. the 'origin' remote, consider setting
    hint: checkout.defaultRemote=origin in your config.

I considered splitting this into checkout.defaultRemote and
worktree.defaultRemote, but it's probably less confusing to break our
own rules that anything shared between config should live in core.*
than have two config settings, and I couldn't come up with a short
name under core.* that made sense (core.defaultRemoteForCheckout?).

See also 70c9ac2f19 ("DWIM "git checkout frotz" to "git checkout -b
frotz origin/frotz"", 2009-10-18) which introduced this DWIM feature
to begin with, and 4e85333197 ("worktree: make add <path> <branch>
dwim", 2017-11-26) which added it to git-worktree.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-06-11 09:41:02 -07:00

543 lines
18 KiB
Plaintext

git-checkout(1)
===============
NAME
----
git-checkout - Switch branches or restore working tree files
SYNOPSIS
--------
[verse]
'git checkout' [-q] [-f] [-m] [<branch>]
'git checkout' [-q] [-f] [-m] --detach [<branch>]
'git checkout' [-q] [-f] [-m] [--detach] <commit>
'git checkout' [-q] [-f] [-m] [[-b|-B|--orphan] <new_branch>] [<start_point>]
'git checkout' [-f|--ours|--theirs|-m|--conflict=<style>] [<tree-ish>] [--] <paths>...
'git checkout' [<tree-ish>] [--] <pathspec>...
'git checkout' (-p|--patch) [<tree-ish>] [--] [<paths>...]
DESCRIPTION
-----------
Updates files in the working tree to match the version in the index
or the specified tree. If no paths are given, 'git checkout' will
also update `HEAD` to set the specified branch as the current
branch.
'git checkout' <branch>::
To prepare for working on <branch>, switch to it by updating
the index and the files in the working tree, and by pointing
HEAD at the branch. Local modifications to the files in the
working tree are kept, so that they can be committed to the
<branch>.
+
If <branch> is not found but there does exist a tracking branch in
exactly one remote (call it <remote>) with a matching name, treat as
equivalent to
+
------------
$ git checkout -b <branch> --track <remote>/<branch>
------------
+
If the branch exists in multiple remotes and one of them is named by
the `checkout.defaultRemote` configuration variable, we'll use that
one for the purposes of disambiguation, even if the `<branch>` isn't
unique across all remotes. Set it to
e.g. `checkout.defaultRemote=origin` to always checkout remote
branches from there if `<branch>` is ambiguous but exists on the
'origin' remote. See also `checkout.defaultRemote` in
linkgit:git-config[1].
+
You could omit <branch>, in which case the command degenerates to
"check out the current branch", which is a glorified no-op with
rather expensive side-effects to show only the tracking information,
if exists, for the current branch.
'git checkout' -b|-B <new_branch> [<start point>]::
Specifying `-b` causes a new branch to be created as if
linkgit:git-branch[1] were called and then checked out. In
this case you can use the `--track` or `--no-track` options,
which will be passed to 'git branch'. As a convenience,
`--track` without `-b` implies branch creation; see the
description of `--track` below.
+
If `-B` is given, <new_branch> is created if it doesn't exist; otherwise, it
is reset. This is the transactional equivalent of
+
------------
$ git branch -f <branch> [<start point>]
$ git checkout <branch>
------------
+
that is to say, the branch is not reset/created unless "git checkout" is
successful.
'git checkout' --detach [<branch>]::
'git checkout' [--detach] <commit>::
Prepare to work on top of <commit>, by detaching HEAD at it
(see "DETACHED HEAD" section), and updating the index and the
files in the working tree. Local modifications to the files
in the working tree are kept, so that the resulting working
tree will be the state recorded in the commit plus the local
modifications.
+
When the <commit> argument is a branch name, the `--detach` option can
be used to detach HEAD at the tip of the branch (`git checkout
<branch>` would check out that branch without detaching HEAD).
+
Omitting <branch> detaches HEAD at the tip of the current branch.
'git checkout' [<tree-ish>] [--] <pathspec>...::
Overwrite paths in the working tree by replacing with the
contents in the index or in the <tree-ish> (most often a
commit). When a <tree-ish> is given, the paths that
match the <pathspec> are updated both in the index and in
the working tree.
+
The index may contain unmerged entries because of a previous failed merge.
By default, if you try to check out such an entry from the index, the
checkout operation will fail and nothing will be checked out.
Using `-f` will ignore these unmerged entries. The contents from a
specific side of the merge can be checked out of the index by
using `--ours` or `--theirs`. With `-m`, changes made to the working tree
file can be discarded to re-create the original conflicted merge result.
'git checkout' (-p|--patch) [<tree-ish>] [--] [<pathspec>...]::
This is similar to the "check out paths to the working tree
from either the index or from a tree-ish" mode described
above, but lets you use the interactive interface to show
the "diff" output and choose which hunks to use in the
result. See below for the description of `--patch` option.
OPTIONS
-------
-q::
--quiet::
Quiet, suppress feedback messages.
--[no-]progress::
Progress status is reported on the standard error stream
by default when it is attached to a terminal, unless `--quiet`
is specified. This flag enables progress reporting even if not
attached to a terminal, regardless of `--quiet`.
-f::
--force::
When switching branches, proceed even if the index or the
working tree differs from HEAD. This is used to throw away
local changes.
+
When checking out paths from the index, do not fail upon unmerged
entries; instead, unmerged entries are ignored.
--ours::
--theirs::
When checking out paths from the index, check out stage #2
('ours') or #3 ('theirs') for unmerged paths.
+
Note that during `git rebase` and `git pull --rebase`, 'ours' and
'theirs' may appear swapped; `--ours` gives the version from the
branch the changes are rebased onto, while `--theirs` gives the
version from the branch that holds your work that is being rebased.
+
This is because `rebase` is used in a workflow that treats the
history at the remote as the shared canonical one, and treats the
work done on the branch you are rebasing as the third-party work to
be integrated, and you are temporarily assuming the role of the
keeper of the canonical history during the rebase. As the keeper of
the canonical history, you need to view the history from the remote
as `ours` (i.e. "our shared canonical history"), while what you did
on your side branch as `theirs` (i.e. "one contributor's work on top
of it").
-b <new_branch>::
Create a new branch named <new_branch> and start it at
<start_point>; see linkgit:git-branch[1] for details.
-B <new_branch>::
Creates the branch <new_branch> and start it at <start_point>;
if it already exists, then reset it to <start_point>. This is
equivalent to running "git branch" with "-f"; see
linkgit:git-branch[1] for details.
-t::
--track::
When creating a new branch, set up "upstream" configuration. See
"--track" in linkgit:git-branch[1] for details.
+
If no `-b` option is given, the name of the new branch will be
derived from the remote-tracking branch, by looking at the local part of
the refspec configured for the corresponding remote, and then stripping
the initial part up to the "*".
This would tell us to use "hack" as the local branch when branching
off of "origin/hack" (or "remotes/origin/hack", or even
"refs/remotes/origin/hack"). If the given name has no slash, or the above
guessing results in an empty name, the guessing is aborted. You can
explicitly give a name with `-b` in such a case.
--no-track::
Do not set up "upstream" configuration, even if the
branch.autoSetupMerge configuration variable is true.
-l::
Create the new branch's reflog; see linkgit:git-branch[1] for
details.
--detach::
Rather than checking out a branch to work on it, check out a
commit for inspection and discardable experiments.
This is the default behavior of "git checkout <commit>" when
<commit> is not a branch name. See the "DETACHED HEAD" section
below for details.
--orphan <new_branch>::
Create a new 'orphan' branch, named <new_branch>, started from
<start_point> and switch to it. The first commit made on this
new branch will have no parents and it will be the root of a new
history totally disconnected from all the other branches and
commits.
+
The index and the working tree are adjusted as if you had previously run
"git checkout <start_point>". This allows you to start a new history
that records a set of paths similar to <start_point> by easily running
"git commit -a" to make the root commit.
+
This can be useful when you want to publish the tree from a commit
without exposing its full history. You might want to do this to publish
an open source branch of a project whose current tree is "clean", but
whose full history contains proprietary or otherwise encumbered bits of
code.
+
If you want to start a disconnected history that records a set of paths
that is totally different from the one of <start_point>, then you should
clear the index and the working tree right after creating the orphan
branch by running "git rm -rf ." from the top level of the working tree.
Afterwards you will be ready to prepare your new files, repopulating the
working tree, by copying them from elsewhere, extracting a tarball, etc.
--ignore-skip-worktree-bits::
In sparse checkout mode, `git checkout -- <paths>` would
update only entries matched by <paths> and sparse patterns
in $GIT_DIR/info/sparse-checkout. This option ignores
the sparse patterns and adds back any files in <paths>.
-m::
--merge::
When switching branches,
if you have local modifications to one or more files that
are different between the current branch and the branch to
which you are switching, the command refuses to switch
branches in order to preserve your modifications in context.
However, with this option, a three-way merge between the current
branch, your working tree contents, and the new branch
is done, and you will be on the new branch.
+
When a merge conflict happens, the index entries for conflicting
paths are left unmerged, and you need to resolve the conflicts
and mark the resolved paths with `git add` (or `git rm` if the merge
should result in deletion of the path).
+
When checking out paths from the index, this option lets you recreate
the conflicted merge in the specified paths.
--conflict=<style>::
The same as --merge option above, but changes the way the
conflicting hunks are presented, overriding the
merge.conflictStyle configuration variable. Possible values are
"merge" (default) and "diff3" (in addition to what is shown by
"merge" style, shows the original contents).
-p::
--patch::
Interactively select hunks in the difference between the
<tree-ish> (or the index, if unspecified) and the working
tree. The chosen hunks are then applied in reverse to the
working tree (and if a <tree-ish> was specified, the index).
+
This means that you can use `git checkout -p` to selectively discard
edits from your current working tree. See the ``Interactive Mode''
section of linkgit:git-add[1] to learn how to operate the `--patch` mode.
--ignore-other-worktrees::
`git checkout` refuses when the wanted ref is already checked
out by another worktree. This option makes it check the ref
out anyway. In other words, the ref can be held by more than one
worktree.
--[no-]recurse-submodules::
Using --recurse-submodules will update the content of all initialized
submodules according to the commit recorded in the superproject. If
local modifications in a submodule would be overwritten the checkout
will fail unless `-f` is used. If nothing (or --no-recurse-submodules)
is used, the work trees of submodules will not be updated.
Just like linkgit:git-submodule[1], this will detach the
submodules HEAD.
<branch>::
Branch to checkout; if it refers to a branch (i.e., a name that,
when prepended with "refs/heads/", is a valid ref), then that
branch is checked out. Otherwise, if it refers to a valid
commit, your HEAD becomes "detached" and you are no longer on
any branch (see below for details).
+
You can use the `"@{-N}"` syntax to refer to the N-th last
branch/commit checked out using "git checkout" operation. You may
also specify `-` which is synonymous to `"@{-1}`.
+
As a special case, you may use `"A...B"` as a shortcut for the
merge base of `A` and `B` if there is exactly one merge base. You can
leave out at most one of `A` and `B`, in which case it defaults to `HEAD`.
<new_branch>::
Name for the new branch.
<start_point>::
The name of a commit at which to start the new branch; see
linkgit:git-branch[1] for details. Defaults to HEAD.
<tree-ish>::
Tree to checkout from (when paths are given). If not specified,
the index will be used.
DETACHED HEAD
-------------
HEAD normally refers to a named branch (e.g. 'master'). Meanwhile, each
branch refers to a specific commit. Let's look at a repo with three
commits, one of them tagged, and with branch 'master' checked out:
------------
HEAD (refers to branch 'master')
|
v
a---b---c branch 'master' (refers to commit 'c')
^
|
tag 'v2.0' (refers to commit 'b')
------------
When a commit is created in this state, the branch is updated to refer to
the new commit. Specifically, 'git commit' creates a new commit 'd', whose
parent is commit 'c', and then updates branch 'master' to refer to new
commit 'd'. HEAD still refers to branch 'master' and so indirectly now refers
to commit 'd':
------------
$ edit; git add; git commit
HEAD (refers to branch 'master')
|
v
a---b---c---d branch 'master' (refers to commit 'd')
^
|
tag 'v2.0' (refers to commit 'b')
------------
It is sometimes useful to be able to checkout a commit that is not at
the tip of any named branch, or even to create a new commit that is not
referenced by a named branch. Let's look at what happens when we
checkout commit 'b' (here we show two ways this may be done):
------------
$ git checkout v2.0 # or
$ git checkout master^^
HEAD (refers to commit 'b')
|
v
a---b---c---d branch 'master' (refers to commit 'd')
^
|
tag 'v2.0' (refers to commit 'b')
------------
Notice that regardless of which checkout command we use, HEAD now refers
directly to commit 'b'. This is known as being in detached HEAD state.
It means simply that HEAD refers to a specific commit, as opposed to
referring to a named branch. Let's see what happens when we create a commit:
------------
$ edit; git add; git commit
HEAD (refers to commit 'e')
|
v
e
/
a---b---c---d branch 'master' (refers to commit 'd')
^
|
tag 'v2.0' (refers to commit 'b')
------------
There is now a new commit 'e', but it is referenced only by HEAD. We can
of course add yet another commit in this state:
------------
$ edit; git add; git commit
HEAD (refers to commit 'f')
|
v
e---f
/
a---b---c---d branch 'master' (refers to commit 'd')
^
|
tag 'v2.0' (refers to commit 'b')
------------
In fact, we can perform all the normal Git operations. But, let's look
at what happens when we then checkout master:
------------
$ git checkout master
HEAD (refers to branch 'master')
e---f |
/ v
a---b---c---d branch 'master' (refers to commit 'd')
^
|
tag 'v2.0' (refers to commit 'b')
------------
It is important to realize that at this point nothing refers to commit
'f'. Eventually commit 'f' (and by extension commit 'e') will be deleted
by the routine Git garbage collection process, unless we create a reference
before that happens. If we have not yet moved away from commit 'f',
any of these will create a reference to it:
------------
$ git checkout -b foo <1>
$ git branch foo <2>
$ git tag foo <3>
------------
<1> creates a new branch 'foo', which refers to commit 'f', and then
updates HEAD to refer to branch 'foo'. In other words, we'll no longer
be in detached HEAD state after this command.
<2> similarly creates a new branch 'foo', which refers to commit 'f',
but leaves HEAD detached.
<3> creates a new tag 'foo', which refers to commit 'f',
leaving HEAD detached.
If we have moved away from commit 'f', then we must first recover its object
name (typically by using git reflog), and then we can create a reference to
it. For example, to see the last two commits to which HEAD referred, we
can use either of these commands:
------------
$ git reflog -2 HEAD # or
$ git log -g -2 HEAD
------------
ARGUMENT DISAMBIGUATION
-----------------------
When there is only one argument given and it is not `--` (e.g. "git
checkout abc"), and when the argument is both a valid `<tree-ish>`
(e.g. a branch "abc" exists) and a valid `<pathspec>` (e.g. a file
or a directory whose name is "abc" exists), Git would usually ask
you to disambiguate. Because checking out a branch is so common an
operation, however, "git checkout abc" takes "abc" as a `<tree-ish>`
in such a situation. Use `git checkout -- <pathspec>` if you want
to checkout these paths out of the index.
EXAMPLES
--------
. The following sequence checks out the `master` branch, reverts
the `Makefile` to two revisions back, deletes hello.c by
mistake, and gets it back from the index.
+
------------
$ git checkout master <1>
$ git checkout master~2 Makefile <2>
$ rm -f hello.c
$ git checkout hello.c <3>
------------
+
<1> switch branch
<2> take a file out of another commit
<3> restore hello.c from the index
+
If you want to check out _all_ C source files out of the index,
you can say
+
------------
$ git checkout -- '*.c'
------------
+
Note the quotes around `*.c`. The file `hello.c` will also be
checked out, even though it is no longer in the working tree,
because the file globbing is used to match entries in the index
(not in the working tree by the shell).
+
If you have an unfortunate branch that is named `hello.c`, this
step would be confused as an instruction to switch to that branch.
You should instead write:
+
------------
$ git checkout -- hello.c
------------
. After working in the wrong branch, switching to the correct
branch would be done using:
+
------------
$ git checkout mytopic
------------
+
However, your "wrong" branch and correct "mytopic" branch may
differ in files that you have modified locally, in which case
the above checkout would fail like this:
+
------------
$ git checkout mytopic
error: You have local changes to 'frotz'; not switching branches.
------------
+
You can give the `-m` flag to the command, which would try a
three-way merge:
+
------------
$ git checkout -m mytopic
Auto-merging frotz
------------
+
After this three-way merge, the local modifications are _not_
registered in your index file, so `git diff` would show you what
changes you made since the tip of the new branch.
. When a merge conflict happens during switching branches with
the `-m` option, you would see something like this:
+
------------
$ git checkout -m mytopic
Auto-merging frotz
ERROR: Merge conflict in frotz
fatal: merge program failed
------------
+
At this point, `git diff` shows the changes cleanly merged as in
the previous example, as well as the changes in the conflicted
files. Edit and resolve the conflict and mark it resolved with
`git add` as usual:
+
------------
$ edit frotz
$ git add frotz
------------
GIT
---
Part of the linkgit:git[1] suite