git/t/annotate-tests.sh
Ævar Arnfjörð Bjarmason f08b4013c3 blame tests: simplify userdiff driver test
Simplify the test added in 9466e3809d (blame: enable funcname blaming
with userdiff driver, 2020-11-01) to use the --author support recently
added in 999cfc4f45 (test-lib functions: add --author support to
test_commit, 2021-01-12).

We also did not need the full fortran-external-function content. Let's
cut it down to just the important parts.

I'm modifying it to demonstrate that the fortran-specific userdiff
function is in effect by adding "DO NOT MATCH ..." and "AS THE ..."
lines surrounding the "RIGHT" one.

This is to check that we're using the userdiff "fortran" driver, as
opposed to the default driver which would match on those lines as part
of the general heuristic of matching a line that doesn't begin with
whitespace.

The test had also been leaving behind a .gitattributes file for later
tests to possibly trip over, let's clean it up with
"test_when_finished".

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-04-08 12:19:10 -07:00

607 lines
14 KiB
Bash

# This file isn't used as a test script directly, instead it is
# sourced from t8001-annotate.sh and t8002-blame.sh.
if test_have_prereq MINGW
then
sanitize_L () {
echo "$1" | sed 'sX\(^-L\|,\)\^\?/X&\\;*Xg'
}
else
sanitize_L () {
echo "$1"
}
fi
check_count () {
head= &&
file='file' &&
options= &&
while :
do
case "$1" in
-h) head="$2"; shift; shift ;;
-f) file="$2"; shift; shift ;;
-L*) options="$options $(sanitize_L "$1")"; shift ;;
-*) options="$options $1"; shift ;;
*) break ;;
esac
done &&
echo "$PROG $options $file $head" >&4 &&
$PROG $options $file $head >actual &&
perl -e '
my %expect = (@ARGV);
my %count = map { $_ => 0 } keys %expect;
while (<STDIN>) {
if (/^[0-9a-f]+\t\(([^\t]+)\t/) {
my $author = $1;
for ($author) { s/^\s*//; s/\s*$//; }
$count{$author}++;
}
}
my $bad = 0;
while (my ($author, $count) = each %count) {
my $ok;
my $value = 0;
$value = $expect{$author} if defined $expect{$author};
if ($value != $count) {
$bad = 1;
$ok = "bad";
}
else {
$ok = "good";
}
print STDERR "Author $author (expected $value, attributed $count) $ok\n";
}
exit($bad);
' "$@" <actual
}
test_expect_success 'setup A lines' '
echo "1A quick brown fox jumps over the" >file &&
echo "lazy dog" >>file &&
git add file &&
GIT_AUTHOR_NAME="A" GIT_AUTHOR_EMAIL="A@test.git" \
git commit -a -m "Initial."
'
test_expect_success 'blame 1 author' '
check_count A 2
'
test_expect_success 'blame in a bare repo without starting commit' '
git clone --bare . bare.git &&
(
cd bare.git &&
check_count A 2
)
'
test_expect_success 'blame by tag objects' '
git tag -m "test tag" testTag &&
git tag -m "test tag #2" testTag2 testTag &&
check_count -h testTag A 2 &&
check_count -h testTag2 A 2
'
test_expect_success 'setup B lines' '
echo "2A quick brown fox jumps over the" >>file &&
echo "lazy dog" >>file &&
GIT_AUTHOR_NAME="B" GIT_AUTHOR_EMAIL="B@test.git" \
git commit -a -m "Second."
'
test_expect_success 'blame 2 authors' '
check_count A 2 B 2
'
test_expect_success 'setup B1 lines (branch1)' '
git checkout -b branch1 main &&
echo "3A slow green fox jumps into the" >>file &&
echo "well." >>file &&
GIT_AUTHOR_NAME="B1" GIT_AUTHOR_EMAIL="B1@test.git" \
git commit -a -m "Branch1-1"
'
test_expect_success 'blame 2 authors + 1 branch1 author' '
check_count A 2 B 2 B1 2
'
test_expect_success 'setup B2 lines (branch2)' '
git checkout -b branch2 main &&
sed -e "s/2A quick brown/4A quick brown lazy dog/" <file >file.new &&
mv file.new file &&
GIT_AUTHOR_NAME="B2" GIT_AUTHOR_EMAIL="B2@test.git" \
git commit -a -m "Branch2-1"
'
test_expect_success 'blame 2 authors + 1 branch2 author' '
check_count A 2 B 1 B2 1
'
test_expect_success 'merge branch1 & branch2' '
git merge branch1
'
test_expect_success 'blame 2 authors + 2 merged-in authors' '
check_count A 2 B 1 B1 2 B2 1
'
test_expect_success 'blame --first-parent blames merge for branch1' '
check_count --first-parent A 2 B 1 "A U Thor" 2 B2 1
'
test_expect_success 'blame ancestor' '
check_count -h main A 2 B 2
'
test_expect_success 'blame great-ancestor' '
check_count -h main^ A 2
'
test_expect_success 'setup evil merge' '
echo "evil merge." >>file &&
git commit -a --amend
'
test_expect_success 'blame evil merge' '
check_count A 2 B 1 B1 2 B2 1 "A U Thor" 1
'
test_expect_success 'blame huge graft' '
test_when_finished "git checkout branch2" &&
test_when_finished "rm -f .git/info/grafts" &&
graft= &&
for i in 0 1 2
do
for j in 0 1 2 3 4 5 6 7 8 9
do
git checkout --orphan "$i$j" &&
printf "%s\n" "$i" "$j" >file &&
test_tick &&
GIT_AUTHOR_NAME=$i$j GIT_AUTHOR_EMAIL=$i$j@test.git \
git commit -a -m "$i$j" &&
commit=$(git rev-parse --verify HEAD) &&
graft="$graft$commit "
done
done &&
printf "%s " $graft >.git/info/grafts &&
check_count -h 00 01 1 10 1
'
test_expect_success 'setup incomplete line' '
echo "incomplete" | tr -d "\\012" >>file &&
GIT_AUTHOR_NAME="C" GIT_AUTHOR_EMAIL="C@test.git" \
git commit -a -m "Incomplete"
'
test_expect_success 'blame incomplete line' '
check_count A 2 B 1 B1 2 B2 1 "A U Thor" 1 C 1
'
test_expect_success 'setup edits' '
mv file file.orig &&
{
cat file.orig &&
echo
} | sed -e "s/^3A/99/" -e "/^1A/d" -e "/^incomplete/d" >file &&
echo "incomplete" | tr -d "\\012" >>file &&
GIT_AUTHOR_NAME="D" GIT_AUTHOR_EMAIL="D@test.git" \
git commit -a -m "edit"
'
test_expect_success 'blame edits' '
check_count A 1 B 1 B1 1 B2 1 "A U Thor" 1 C 1 D 1
'
test_expect_success 'setup obfuscated email' '
echo "No robots allowed" >file.new &&
cat file >>file.new &&
mv file.new file &&
GIT_AUTHOR_NAME="E" GIT_AUTHOR_EMAIL="E at test dot git" \
git commit -a -m "norobots"
'
test_expect_success 'blame obfuscated email' '
check_count A 1 B 1 B1 1 B2 1 "A U Thor" 1 C 1 D 1 E 1
'
test_expect_success 'blame -L 1 (all)' '
check_count -L1 A 1 B 1 B1 1 B2 1 "A U Thor" 1 C 1 D 1 E 1
'
test_expect_success 'blame -L , (all)' '
check_count -L, A 1 B 1 B1 1 B2 1 "A U Thor" 1 C 1 D 1 E 1
'
test_expect_success 'blame -L X (X to end)' '
check_count -L5 B1 1 C 1 D 1 "A U Thor" 1
'
test_expect_success 'blame -L X, (X to end)' '
check_count -L5, B1 1 C 1 D 1 "A U Thor" 1
'
test_expect_success 'blame -L ,Y (up to Y)' '
check_count -L,3 A 1 B2 1 E 1
'
test_expect_success 'blame -L X,X' '
check_count -L3,3 B2 1
'
test_expect_success 'blame -L X,Y' '
check_count -L3,6 B 1 B1 1 B2 1 D 1
'
test_expect_success 'blame -L Y,X (undocumented)' '
check_count -L6,3 B 1 B1 1 B2 1 D 1
'
test_expect_success 'blame -L -X' '
test_must_fail $PROG -L-1 file
'
test_expect_success 'blame -L 0' '
test_must_fail $PROG -L0 file
'
test_expect_success 'blame -L ,0' '
test_must_fail $PROG -L,0 file
'
test_expect_success 'blame -L ,+0' '
test_must_fail $PROG -L,+0 file
'
test_expect_success 'blame -L X,+0' '
test_must_fail $PROG -L1,+0 file
'
test_expect_success 'blame -L X,+1' '
check_count -L3,+1 B2 1
'
test_expect_success 'blame -L X,+N' '
check_count -L3,+4 B 1 B1 1 B2 1 D 1
'
test_expect_success 'blame -L ,-0' '
test_must_fail $PROG -L,-0 file
'
test_expect_success 'blame -L X,-0' '
test_must_fail $PROG -L1,-0 file
'
test_expect_success 'blame -L X,-1' '
check_count -L3,-1 B2 1
'
test_expect_success 'blame -L X,-N' '
check_count -L6,-4 B 1 B1 1 B2 1 D 1
'
test_expect_success 'blame -L /RE/ (RE to end)' '
check_count -L/evil/ C 1 "A U Thor" 1
'
test_expect_success 'blame -L /RE/,/RE2/' '
check_count -L/robot/,/green/ A 1 B 1 B2 1 D 1 E 1
'
test_expect_success 'blame -L X,/RE/' '
check_count -L5,/evil/ B1 1 D 1 "A U Thor" 1
'
test_expect_success 'blame -L /RE/,Y' '
check_count -L/99/,7 B1 1 D 1 "A U Thor" 1
'
test_expect_success 'blame -L /RE/,+N' '
check_count -L/99/,+3 B1 1 D 1 "A U Thor" 1
'
test_expect_success 'blame -L /RE/,-N' '
check_count -L/99/,-3 B 1 B2 1 D 1
'
# 'file' ends with an incomplete line, so 'wc' reports one fewer lines than
# git-blame sees, hence the last line is actually $(wc...)+1.
test_expect_success 'blame -L X (X == nlines)' '
n=$(expr $(wc -l <file) + 1) &&
check_count -L$n C 1
'
test_expect_success 'blame -L X (X == nlines + 1)' '
n=$(expr $(wc -l <file) + 2) &&
test_must_fail $PROG -L$n file
'
test_expect_success 'blame -L X (X > nlines)' '
test_must_fail $PROG -L12345 file
'
test_expect_success 'blame -L ,Y (Y == nlines)' '
n=$(expr $(wc -l <file) + 1) &&
check_count -L,$n A 1 B 1 B1 1 B2 1 "A U Thor" 1 C 1 D 1 E 1
'
test_expect_success 'blame -L ,Y (Y == nlines + 1)' '
n=$(expr $(wc -l <file) + 2) &&
check_count -L,$n A 1 B 1 B1 1 B2 1 "A U Thor" 1 C 1 D 1 E 1
'
test_expect_success 'blame -L ,Y (Y > nlines)' '
check_count -L,12345 A 1 B 1 B1 1 B2 1 "A U Thor" 1 C 1 D 1 E 1
'
test_expect_success 'blame -L multiple (disjoint)' '
check_count -L2,3 -L6,7 A 1 B1 1 B2 1 "A U Thor" 1
'
test_expect_success 'blame -L multiple (disjoint: unordered)' '
check_count -L6,7 -L2,3 A 1 B1 1 B2 1 "A U Thor" 1
'
test_expect_success 'blame -L multiple (adjacent)' '
check_count -L2,3 -L4,5 A 1 B 1 B2 1 D 1
'
test_expect_success 'blame -L multiple (adjacent: unordered)' '
check_count -L4,5 -L2,3 A 1 B 1 B2 1 D 1
'
test_expect_success 'blame -L multiple (overlapping)' '
check_count -L2,4 -L3,5 A 1 B 1 B2 1 D 1
'
test_expect_success 'blame -L multiple (overlapping: unordered)' '
check_count -L3,5 -L2,4 A 1 B 1 B2 1 D 1
'
test_expect_success 'blame -L multiple (superset/subset)' '
check_count -L2,8 -L3,5 A 1 B 1 B1 1 B2 1 C 1 D 1 "A U Thor" 1
'
test_expect_success 'blame -L multiple (superset/subset: unordered)' '
check_count -L3,5 -L2,8 A 1 B 1 B1 1 B2 1 C 1 D 1 "A U Thor" 1
'
test_expect_success 'blame -L /RE/ (relative)' '
check_count -L3,3 -L/fox/ B1 1 B2 1 C 1 D 1 "A U Thor" 1
'
test_expect_success 'blame -L /RE/ (relative: no preceding range)' '
check_count -L/dog/ A 1 B 1 B1 1 B2 1 C 1 D 1 "A U Thor" 1
'
test_expect_success 'blame -L /RE/ (relative: adjacent)' '
check_count -L1,1 -L/dog/,+1 A 1 E 1
'
test_expect_success 'blame -L /RE/ (relative: not found)' '
test_must_fail $PROG -L4,4 -L/dog/ file
'
test_expect_success 'blame -L /RE/ (relative: end-of-file)' '
test_must_fail $PROG -L, -L/$/ file
'
test_expect_success 'blame -L ^/RE/ (absolute)' '
check_count -L3,3 -L^/dog/,+2 A 1 B2 1
'
test_expect_success 'blame -L ^/RE/ (absolute: no preceding range)' '
check_count -L^/dog/,+2 A 1 B2 1
'
test_expect_success 'blame -L ^/RE/ (absolute: not found)' '
test_must_fail $PROG -L4,4 -L^/tambourine/ file
'
test_expect_success 'blame -L ^/RE/ (absolute: end-of-file)' '
n=$(expr $(wc -l <file) + 1) &&
check_count -L$n -L^/$/,+2 A 1 C 1 E 1
'
test_expect_success 'setup -L :regex' '
tr Q "\\t" >hello.c <<-\EOF &&
int main(int argc, const char *argv[])
{
Qputs("hello");
}
EOF
git add hello.c &&
GIT_AUTHOR_NAME="F" GIT_AUTHOR_EMAIL="F@test.git" \
git commit -m "hello" &&
mv hello.c hello.orig &&
sed -e "/}/ {x; s/$/Qputs(\"goodbye\");/; G;}" <hello.orig |
tr Q "\\t" >hello.c &&
GIT_AUTHOR_NAME="G" GIT_AUTHOR_EMAIL="G@test.git" \
git commit -a -m "goodbye" &&
mv hello.c hello.orig &&
echo "#include <stdio.h>" >hello.c &&
cat hello.orig >>hello.c &&
tr Q "\\t" >>hello.c <<-\EOF &&
void mail()
{
Qputs("mail");
}
EOF
GIT_AUTHOR_NAME="H" GIT_AUTHOR_EMAIL="H@test.git" \
git commit -a -m "mail"
'
test_expect_success 'blame -L :literal' '
check_count -f hello.c -L:main F 4 G 1
'
test_expect_success 'blame -L :regex' '
check_count -f hello.c "-L:m[a-z][a-z]l" H 4
'
test_expect_success 'blame -L :nomatch' '
test_must_fail $PROG -L:nomatch hello.c
'
test_expect_success 'blame -L :RE (relative)' '
check_count -f hello.c -L3,3 -L:ma.. F 1 H 4
'
test_expect_success 'blame -L :RE (relative: no preceding range)' '
check_count -f hello.c -L:ma.. F 4 G 1
'
test_expect_success 'blame -L :RE (relative: not found)' '
test_must_fail $PROG -L3,3 -L:tambourine hello.c
'
test_expect_success 'blame -L :RE (relative: end-of-file)' '
test_must_fail $PROG -L, -L:main hello.c
'
test_expect_success 'blame -L ^:RE (absolute)' '
check_count -f hello.c -L3,3 -L^:ma.. F 4 G 1
'
test_expect_success 'blame -L ^:RE (absolute: no preceding range)' '
check_count -f hello.c -L^:ma.. F 4 G 1
'
test_expect_success 'blame -L ^:RE (absolute: not found)' '
test_must_fail $PROG -L4,4 -L^:tambourine hello.c
'
test_expect_success 'blame -L ^:RE (absolute: end-of-file)' '
n=$(printf "%d" $(wc -l <hello.c)) &&
check_count -f hello.c -L$n -L^:ma.. F 4 G 1 H 1
'
test_expect_success 'blame -L :funcname with userdiff driver' '
cat >file.template <<-\EOF &&
DO NOT MATCH THIS LINE
function RIGHT(a, b) result(c)
AS THE DEFAULT DRIVER WOULD
integer, intent(in) :: ChangeMe
EOF
fortran_file=file.f03 &&
test_when_finished "rm .gitattributes" &&
echo "$fortran_file diff=fortran" >.gitattributes &&
test_commit --author "A <A@test.git>" \
"add" "$fortran_file" \
"$(cat file.template)" &&
test_commit --author "B <B@test.git>" \
"change" "$fortran_file" \
"$(cat file.template | sed -e s/ChangeMe/IWasChanged/)" &&
check_count -f "$fortran_file" -L:RIGHT A 3 B 1
'
test_expect_success 'setup incremental' '
(
GIT_AUTHOR_NAME=I &&
export GIT_AUTHOR_NAME &&
GIT_AUTHOR_EMAIL=I@test.git &&
export GIT_AUTHOR_EMAIL &&
>incremental &&
git add incremental &&
git commit -m "step 0" &&
printf "partial" >>incremental &&
git commit -a -m "step 0.5" &&
echo >>incremental &&
git commit -a -m "step 1"
)
'
test_expect_success 'blame empty' '
check_count -h HEAD^^ -f incremental
'
test_expect_success 'blame -L 0 empty' '
test_must_fail $PROG -L0 incremental HEAD^^
'
test_expect_success 'blame -L 1 empty' '
test_must_fail $PROG -L1 incremental HEAD^^
'
test_expect_success 'blame -L 2 empty' '
test_must_fail $PROG -L2 incremental HEAD^^
'
test_expect_success 'blame half' '
check_count -h HEAD^ -f incremental I 1
'
test_expect_success 'blame -L 0 half' '
test_must_fail $PROG -L0 incremental HEAD^
'
test_expect_success 'blame -L 1 half' '
check_count -h HEAD^ -f incremental -L1 I 1
'
test_expect_success 'blame -L 2 half' '
test_must_fail $PROG -L2 incremental HEAD^
'
test_expect_success 'blame -L 3 half' '
test_must_fail $PROG -L3 incremental HEAD^
'
test_expect_success 'blame full' '
check_count -f incremental I 1
'
test_expect_success 'blame -L 0 full' '
test_must_fail $PROG -L0 incremental
'
test_expect_success 'blame -L 1 full' '
check_count -f incremental -L1 I 1
'
test_expect_success 'blame -L 2 full' '
test_must_fail $PROG -L2 incremental
'
test_expect_success 'blame -L 3 full' '
test_must_fail $PROG -L3 incremental
'
test_expect_success 'blame -L' '
test_must_fail $PROG -L file
'
test_expect_success 'blame -L X,+' '
test_must_fail $PROG -L1,+ file
'
test_expect_success 'blame -L X,-' '
test_must_fail $PROG -L1,- file
'
test_expect_success 'blame -L X (non-numeric X)' '
test_must_fail $PROG -LX file
'
test_expect_success 'blame -L X,Y (non-numeric Y)' '
test_must_fail $PROG -L1,Y file
'
test_expect_success 'blame -L X,+N (non-numeric N)' '
test_must_fail $PROG -L1,+N file
'
test_expect_success 'blame -L X,-N (non-numeric N)' '
test_must_fail $PROG -L1,-N file
'
test_expect_success 'blame -L ,^/RE/' '
test_must_fail $PROG -L1,^/99/ file
'