mirror of
https://github.com/git/git
synced 2024-08-27 19:49:21 +00:00
![Derrick Stolee](/assets/img/avatar_default.png)
While testing some ideas in 'git repack', I ran it with '--quiet' and discovered that some progress output was still shown. Specifically, the output for writing the multi-pack-index showed the progress. The 'show_progress' variable in cmd_repack() is initialized with isatty(2) and is not modified at all by the '--quiet' flag. The '--quiet' flag modifies the po_args.quiet option which is translated into a '--quiet' flag for the 'git pack-objects' child process. However, 'show_progress' is used to directly send progress information to the multi-pack-index writing logic which does not use a child process. The fix here is to modify 'show_progress' to be false if po_opts.quiet is true, and isatty(2) otherwise. This new expectation simplifies a later condition that checks both. Update the documentation to make it clear that '-q' will disable all progress in addition to ensuring the 'git pack-objects' child process will receive the flag. Use 'test_terminal' to check that this works to get around the isatty(2) check. Helped-by: Jeff King <peff@peff.net> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
232 lines
8.6 KiB
Plaintext
232 lines
8.6 KiB
Plaintext
git-repack(1)
|
|
=============
|
|
|
|
NAME
|
|
----
|
|
git-repack - Pack unpacked objects in a repository
|
|
|
|
|
|
SYNOPSIS
|
|
--------
|
|
[verse]
|
|
'git repack' [-a] [-A] [-d] [-f] [-F] [-l] [-n] [-q] [-b] [-m] [--window=<n>] [--depth=<n>] [--threads=<n>] [--keep-pack=<pack-name>] [--write-midx]
|
|
|
|
DESCRIPTION
|
|
-----------
|
|
|
|
This command is used to combine all objects that do not currently
|
|
reside in a "pack", into a pack. It can also be used to re-organize
|
|
existing packs into a single, more efficient pack.
|
|
|
|
A pack is a collection of objects, individually compressed, with
|
|
delta compression applied, stored in a single file, with an
|
|
associated index file.
|
|
|
|
Packs are used to reduce the load on mirror systems, backup
|
|
engines, disk storage, etc.
|
|
|
|
OPTIONS
|
|
-------
|
|
|
|
-a::
|
|
Instead of incrementally packing the unpacked objects,
|
|
pack everything referenced into a single pack.
|
|
Especially useful when packing a repository that is used
|
|
for private development. Use
|
|
with `-d`. This will clean up the objects that `git prune`
|
|
leaves behind, but `git fsck --full --dangling` shows as
|
|
dangling.
|
|
+
|
|
Note that users fetching over dumb protocols will have to fetch the
|
|
whole new pack in order to get any contained object, no matter how many
|
|
other objects in that pack they already have locally.
|
|
+
|
|
Promisor packfiles are repacked separately: if there are packfiles that
|
|
have an associated ".promisor" file, these packfiles will be repacked
|
|
into another separate pack, and an empty ".promisor" file corresponding
|
|
to the new separate pack will be written.
|
|
|
|
-A::
|
|
Same as `-a`, unless `-d` is used. Then any unreachable
|
|
objects in a previous pack become loose, unpacked objects,
|
|
instead of being left in the old pack. Unreachable objects
|
|
are never intentionally added to a pack, even when repacking.
|
|
This option prevents unreachable objects from being immediately
|
|
deleted by way of being left in the old pack and then
|
|
removed. Instead, the loose unreachable objects
|
|
will be pruned according to normal expiry rules
|
|
with the next 'git gc' invocation. See linkgit:git-gc[1].
|
|
|
|
-d::
|
|
After packing, if the newly created packs make some
|
|
existing packs redundant, remove the redundant packs.
|
|
Also run 'git prune-packed' to remove redundant
|
|
loose object files.
|
|
|
|
-l::
|
|
Pass the `--local` option to 'git pack-objects'. See
|
|
linkgit:git-pack-objects[1].
|
|
|
|
-f::
|
|
Pass the `--no-reuse-delta` option to `git-pack-objects`, see
|
|
linkgit:git-pack-objects[1].
|
|
|
|
-F::
|
|
Pass the `--no-reuse-object` option to `git-pack-objects`, see
|
|
linkgit:git-pack-objects[1].
|
|
|
|
-q::
|
|
--quiet::
|
|
Show no progress over the standard error stream and pass the `-q`
|
|
option to 'git pack-objects'. See linkgit:git-pack-objects[1].
|
|
|
|
-n::
|
|
Do not update the server information with
|
|
'git update-server-info'. This option skips
|
|
updating local catalog files needed to publish
|
|
this repository (or a direct copy of it)
|
|
over HTTP or FTP. See linkgit:git-update-server-info[1].
|
|
|
|
--window=<n>::
|
|
--depth=<n>::
|
|
These two options affect how the objects contained in the pack are
|
|
stored using delta compression. The objects are first internally
|
|
sorted by type, size and optionally names and compared against the
|
|
other objects within `--window` to see if using delta compression saves
|
|
space. `--depth` limits the maximum delta depth; making it too deep
|
|
affects the performance on the unpacker side, because delta data needs
|
|
to be applied that many times to get to the necessary object.
|
|
+
|
|
The default value for --window is 10 and --depth is 50. The maximum
|
|
depth is 4095.
|
|
|
|
--threads=<n>::
|
|
This option is passed through to `git pack-objects`.
|
|
|
|
--window-memory=<n>::
|
|
This option provides an additional limit on top of `--window`;
|
|
the window size will dynamically scale down so as to not take
|
|
up more than '<n>' bytes in memory. This is useful in
|
|
repositories with a mix of large and small objects to not run
|
|
out of memory with a large window, but still be able to take
|
|
advantage of the large window for the smaller objects. The
|
|
size can be suffixed with "k", "m", or "g".
|
|
`--window-memory=0` makes memory usage unlimited. The default
|
|
is taken from the `pack.windowMemory` configuration variable.
|
|
Note that the actual memory usage will be the limit multiplied
|
|
by the number of threads used by linkgit:git-pack-objects[1].
|
|
|
|
--max-pack-size=<n>::
|
|
Maximum size of each output pack file. The size can be suffixed with
|
|
"k", "m", or "g". The minimum size allowed is limited to 1 MiB.
|
|
If specified, multiple packfiles may be created, which also
|
|
prevents the creation of a bitmap index.
|
|
The default is unlimited, unless the config variable
|
|
`pack.packSizeLimit` is set. Note that this option may result in
|
|
a larger and slower repository; see the discussion in
|
|
`pack.packSizeLimit`.
|
|
|
|
-b::
|
|
--write-bitmap-index::
|
|
Write a reachability bitmap index as part of the repack. This
|
|
only makes sense when used with `-a`, `-A` or `-m`, as the bitmaps
|
|
must be able to refer to all reachable objects. This option
|
|
overrides the setting of `repack.writeBitmaps`. This option
|
|
has no effect if multiple packfiles are created, unless writing a
|
|
MIDX (in which case a multi-pack bitmap is created).
|
|
|
|
--pack-kept-objects::
|
|
Include objects in `.keep` files when repacking. Note that we
|
|
still do not delete `.keep` packs after `pack-objects` finishes.
|
|
This means that we may duplicate objects, but this makes the
|
|
option safe to use when there are concurrent pushes or fetches.
|
|
This option is generally only useful if you are writing bitmaps
|
|
with `-b` or `repack.writeBitmaps`, as it ensures that the
|
|
bitmapped packfile has the necessary objects.
|
|
|
|
--keep-pack=<pack-name>::
|
|
Exclude the given pack from repacking. This is the equivalent
|
|
of having `.keep` file on the pack. `<pack-name>` is the
|
|
pack file name without leading directory (e.g. `pack-123.pack`).
|
|
The option could be specified multiple times to keep multiple
|
|
packs.
|
|
|
|
--unpack-unreachable=<when>::
|
|
When loosening unreachable objects, do not bother loosening any
|
|
objects older than `<when>`. This can be used to optimize out
|
|
the write of any objects that would be immediately pruned by
|
|
a follow-up `git prune`.
|
|
|
|
-k::
|
|
--keep-unreachable::
|
|
When used with `-ad`, any unreachable objects from existing
|
|
packs will be appended to the end of the packfile instead of
|
|
being removed. In addition, any unreachable loose objects will
|
|
be packed (and their loose counterparts removed).
|
|
|
|
-i::
|
|
--delta-islands::
|
|
Pass the `--delta-islands` option to `git-pack-objects`, see
|
|
linkgit:git-pack-objects[1].
|
|
|
|
-g=<factor>::
|
|
--geometric=<factor>::
|
|
Arrange resulting pack structure so that each successive pack
|
|
contains at least `<factor>` times the number of objects as the
|
|
next-largest pack.
|
|
+
|
|
`git repack` ensures this by determining a "cut" of packfiles that need
|
|
to be repacked into one in order to ensure a geometric progression. It
|
|
picks the smallest set of packfiles such that as many of the larger
|
|
packfiles (by count of objects contained in that pack) may be left
|
|
intact.
|
|
+
|
|
Unlike other repack modes, the set of objects to pack is determined
|
|
uniquely by the set of packs being "rolled-up"; in other words, the
|
|
packs determined to need to be combined in order to restore a geometric
|
|
progression.
|
|
+
|
|
When `--unpacked` is specified, loose objects are implicitly included in
|
|
this "roll-up", without respect to their reachability. This is subject
|
|
to change in the future. This option (implying a drastically different
|
|
repack mode) is not guaranteed to work with all other combinations of
|
|
option to `git repack`.
|
|
+
|
|
When writing a multi-pack bitmap, `git repack` selects the largest resulting
|
|
pack as the preferred pack for object selection by the MIDX (see
|
|
linkgit:git-multi-pack-index[1]).
|
|
|
|
-m::
|
|
--write-midx::
|
|
Write a multi-pack index (see linkgit:git-multi-pack-index[1])
|
|
containing the non-redundant packs.
|
|
|
|
CONFIGURATION
|
|
-------------
|
|
|
|
Various configuration variables affect packing, see
|
|
linkgit:git-config[1] (search for "pack" and "delta").
|
|
|
|
By default, the command passes `--delta-base-offset` option to
|
|
'git pack-objects'; this typically results in slightly smaller packs,
|
|
but the generated packs are incompatible with versions of Git older than
|
|
version 1.4.4. If you need to share your repository with such ancient Git
|
|
versions, either directly or via the dumb http protocol, then you
|
|
need to set the configuration variable `repack.UseDeltaBaseOffset` to
|
|
"false" and repack. Access from old Git versions over the native protocol
|
|
is unaffected by this option as the conversion is performed on the fly
|
|
as needed in that case.
|
|
|
|
Delta compression is not used on objects larger than the
|
|
`core.bigFileThreshold` configuration variable and on files with the
|
|
attribute `delta` set to false.
|
|
|
|
SEE ALSO
|
|
--------
|
|
linkgit:git-pack-objects[1]
|
|
linkgit:git-prune-packed[1]
|
|
|
|
GIT
|
|
---
|
|
Part of the linkgit:git[1] suite
|