git/Documentation/git-remote-helpers.txt
Jeff King 6cf378f0cb docs: stop using asciidoc no-inline-literal
In asciidoc 7, backticks like `foo` produced a typographic
effect, but did not otherwise affect the syntax. In asciidoc
8, backticks introduce an "inline literal" inside which markup
is not interpreted. To keep compatibility with existing
documents, asciidoc 8 has a "no-inline-literal" attribute to
keep the old behavior. We enabled this so that the
documentation could be built on either version.

It has been several years now, and asciidoc 7 is no longer
in wide use. We can now decide whether or not we want
inline literals on their own merits, which are:

  1. The source is much easier to read when the literal
     contains punctuation. You can use `master~1` instead
     of `master{tilde}1`.

  2. They are less error-prone. Because of point (1), we
     tend to make mistakes and forget the extra layer of
     quoting.

This patch removes the no-inline-literal attribute from the
Makefile and converts every use of backticks in the
documentation to an inline literal (they must be cleaned up,
or the example above would literally show "{tilde}" in the
output).

Problematic sites were found by grepping for '`.*[{\\]' and
examined and fixed manually. The results were then verified
by comparing the output of "html2text" on the set of
generated html pages. Doing so revealed that in addition to
making the source more readable, this patch fixes several
formatting bugs:

  - HTML rendering used the ellipsis character instead of
    literal "..." in code examples (like "git log A...B")

  - some code examples used the right-arrow character
    instead of '->' because they failed to quote

  - api-config.txt did not quote tilde, and the resulting
    HTML contained a bogus snippet like:

      <tt><sub></tt> foo <tt></sub>bar</tt>

    which caused some parsers to choke and omit whole
    sections of the page.

  - git-commit.txt confused ``foo`` (backticks inside a
    literal) with ``foo'' (matched double-quotes)

  - mentions of `A U Thor <author@example.com>` used to
    erroneously auto-generate a mailto footnote for
    author@example.com

  - the description of --word-diff=plain incorrectly showed
    the output as "[-removed-] and {added}", not "{+added+}".

  - using "prime" notation like:

      commit `C` and its replacement `C'`

    confused asciidoc into thinking that everything between
    the first backtick and the final apostrophe were meant
    to be inside matched quotes

  - asciidoc got confused by the escaping of some of our
    asterisks. In particular,

      `credential.\*` and `credential.<url>.\*`

    properly escaped the asterisk in the first case, but
    literally passed through the backslash in the second
    case.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-04-26 13:19:06 -07:00

370 lines
14 KiB
Plaintext

git-remote-helpers(1)
=====================
NAME
----
git-remote-helpers - Helper programs to interact with remote repositories
SYNOPSIS
--------
[verse]
'git remote-<transport>' <repository> [<URL>]
DESCRIPTION
-----------
Remote helper programs are normally not used directly by end users,
but they are invoked by git when it needs to interact with remote
repositories git does not support natively. A given helper will
implement a subset of the capabilities documented here. When git
needs to interact with a repository using a remote helper, it spawns
the helper as an independent process, sends commands to the helper's
standard input, and expects results from the helper's standard
output. Because a remote helper runs as an independent process from
git, there is no need to re-link git to add a new helper, nor any
need to link the helper with the implementation of git.
Every helper must support the "capabilities" command, which git
uses to determine what other commands the helper will accept. Those
other commands can be used to discover and update remote refs,
transport objects between the object database and the remote repository,
and update the local object store.
Git comes with a "curl" family of remote helpers, that handle various
transport protocols, such as 'git-remote-http', 'git-remote-https',
'git-remote-ftp' and 'git-remote-ftps'. They implement the capabilities
'fetch', 'option', and 'push'.
INPUT FORMAT
------------
Git sends the remote helper a list of commands on standard input, one
per line. The first command is always the 'capabilities' command, in
response to which the remote helper must print a list of the
capabilities it supports (see below) followed by a blank line. The
response to the capabilities command determines what commands Git uses
in the remainder of the command stream.
The command stream is terminated by a blank line. In some cases
(indicated in the documentation of the relevant commands), this blank
line is followed by a payload in some other protocol (e.g., the pack
protocol), while in others it indicates the end of input.
Capabilities
~~~~~~~~~~~~
Each remote helper is expected to support only a subset of commands.
The operations a helper supports are declared to git in the response
to the `capabilities` command (see COMMANDS, below).
'option'::
For specifying settings like `verbosity` (how much output to
write to stderr) and `depth` (how much history is wanted in the
case of a shallow clone) that affect how other commands are
carried out.
'connect'::
For fetching and pushing using git's native packfile protocol
that requires a bidirectional, full-duplex connection.
'push'::
For listing remote refs and pushing specified objects from the
local object store to remote refs.
'fetch'::
For listing remote refs and fetching the associated history to
the local object store.
'import'::
For listing remote refs and fetching the associated history as
a fast-import stream.
'refspec' <refspec>::
This modifies the 'import' capability, allowing the produced
fast-import stream to modify refs in a private namespace
instead of writing to refs/heads or refs/remotes directly.
It is recommended that all importers providing the 'import'
capability use this.
+
A helper advertising the capability
`refspec refs/heads/*:refs/svn/origin/branches/*`
is saying that, when it is asked to `import refs/heads/topic`, the
stream it outputs will update the `refs/svn/origin/branches/topic`
ref.
+
This capability can be advertised multiple times. The first
applicable refspec takes precedence. The left-hand of refspecs
advertised with this capability must cover all refs reported by
the list command. If no 'refspec' capability is advertised,
there is an implied `refspec *:*`.
Capabilities for Pushing
~~~~~~~~~~~~~~~~~~~~~~~~
'connect'::
Can attempt to connect to 'git receive-pack' (for pushing),
'git upload-pack', etc for communication using the
packfile protocol.
+
Supported commands: 'connect'.
'push'::
Can discover remote refs and push local commits and the
history leading up to them to new or existing remote refs.
+
Supported commands: 'list for-push', 'push'.
If a helper advertises both 'connect' and 'push', git will use
'connect' if possible and fall back to 'push' if the helper requests
so when connecting (see the 'connect' command under COMMANDS).
Capabilities for Fetching
~~~~~~~~~~~~~~~~~~~~~~~~~
'connect'::
Can try to connect to 'git upload-pack' (for fetching),
'git receive-pack', etc for communication using the
packfile protocol.
+
Supported commands: 'connect'.
'fetch'::
Can discover remote refs and transfer objects reachable from
them to the local object store.
+
Supported commands: 'list', 'fetch'.
'import'::
Can discover remote refs and output objects reachable from
them as a stream in fast-import format.
+
Supported commands: 'list', 'import'.
If a helper advertises 'connect', git will use it if possible and
fall back to another capability if the helper requests so when
connecting (see the 'connect' command under COMMANDS).
When choosing between 'fetch' and 'import', git prefers 'fetch'.
Other frontends may have some other order of preference.
'refspec' <refspec>::
This modifies the 'import' capability.
+
A helper advertising
`refspec refs/heads/*:refs/svn/origin/branches/*`
in its capabilities is saying that, when it handles
`import refs/heads/topic`, the stream it outputs will update the
`refs/svn/origin/branches/topic` ref.
+
This capability can be advertised multiple times. The first
applicable refspec takes precedence. The left-hand of refspecs
advertised with this capability must cover all refs reported by
the list command. If no 'refspec' capability is advertised,
there is an implied `refspec *:*`.
INVOCATION
----------
Remote helper programs are invoked with one or (optionally) two
arguments. The first argument specifies a remote repository as in git;
it is either the name of a configured remote or a URL. The second
argument specifies a URL; it is usually of the form
'<transport>://<address>', but any arbitrary string is possible.
The 'GIT_DIR' environment variable is set up for the remote helper
and can be used to determine where to store additional data or from
which directory to invoke auxiliary git commands.
When git encounters a URL of the form '<transport>://<address>', where
'<transport>' is a protocol that it cannot handle natively, it
automatically invokes 'git remote-<transport>' with the full URL as
the second argument. If such a URL is encountered directly on the
command line, the first argument is the same as the second, and if it
is encountered in a configured remote, the first argument is the name
of that remote.
A URL of the form '<transport>::<address>' explicitly instructs git to
invoke 'git remote-<transport>' with '<address>' as the second
argument. If such a URL is encountered directly on the command line,
the first argument is '<address>', and if it is encountered in a
configured remote, the first argument is the name of that remote.
Additionally, when a configured remote has 'remote.<name>.vcs' set to
'<transport>', git explicitly invokes 'git remote-<transport>' with
'<name>' as the first argument. If set, the second argument is
'remote.<name>.url'; otherwise, the second argument is omitted.
COMMANDS
--------
Commands are given by the caller on the helper's standard input, one per line.
'capabilities'::
Lists the capabilities of the helper, one per line, ending
with a blank line. Each capability may be preceded with '*',
which marks them mandatory for git version using the remote
helper to understand (unknown mandatory capability is fatal
error).
'list'::
Lists the refs, one per line, in the format "<value> <name>
[<attr> ...]". The value may be a hex sha1 hash, "@<dest>" for
a symref, or "?" to indicate that the helper could not get the
value of the ref. A space-separated list of attributes follows
the name; unrecognized attributes are ignored. The list ends
with a blank line.
+
If 'push' is supported this may be called as 'list for-push'
to obtain the current refs prior to sending one or more 'push'
commands to the helper.
'option' <name> <value>::
Sets the transport helper option <name> to <value>. Outputs a
single line containing one of 'ok' (option successfully set),
'unsupported' (option not recognized) or 'error <msg>'
(option <name> is supported but <value> is not valid
for it). Options should be set before other commands,
and may influence the behavior of those commands.
+
Supported if the helper has the "option" capability.
'fetch' <sha1> <name>::
Fetches the given object, writing the necessary objects
to the database. Fetch commands are sent in a batch, one
per line, terminated with a blank line.
Outputs a single blank line when all fetch commands in the
same batch are complete. Only objects which were reported
in the ref list with a sha1 may be fetched this way.
+
Optionally may output a 'lock <file>' line indicating a file under
GIT_DIR/objects/pack which is keeping a pack until refs can be
suitably updated.
+
Supported if the helper has the "fetch" capability.
'push' +<src>:<dst>::
Pushes the given local <src> commit or branch to the
remote branch described by <dst>. A batch sequence of
one or more 'push' commands is terminated with a blank line
(if there is only one reference to push, a single 'push' command
is followed by a blank line). For example, the following would
be two batches of 'push', the first asking the remote-helper
to push the local ref 'master' to the remote ref 'master' and
the local 'HEAD' to the remote 'branch', and the second
asking to push ref 'foo' to ref 'bar' (forced update requested
by the '+').
+
------------
push refs/heads/master:refs/heads/master
push HEAD:refs/heads/branch
\n
push +refs/heads/foo:refs/heads/bar
\n
------------
+
Zero or more protocol options may be entered after the last 'push'
command, before the batch's terminating blank line.
+
When the push is complete, outputs one or more 'ok <dst>' or
'error <dst> <why>?' lines to indicate success or failure of
each pushed ref. The status report output is terminated by
a blank line. The option field <why> may be quoted in a C
style string if it contains an LF.
+
Supported if the helper has the "push" capability.
'import' <name>::
Produces a fast-import stream which imports the current value
of the named ref. It may additionally import other refs as
needed to construct the history efficiently. The script writes
to a helper-specific private namespace. The value of the named
ref should be written to a location in this namespace derived
by applying the refspecs from the "refspec" capability to the
name of the ref.
+
Especially useful for interoperability with a foreign versioning
system.
+
Just like 'push', a batch sequence of one or more 'import' is
terminated with a blank line. For each batch of 'import', the remote
helper should produce a fast-import stream terminated by a 'done'
command.
+
Supported if the helper has the "import" capability.
'connect' <service>::
Connects to given service. Standard input and standard output
of helper are connected to specified service (git prefix is
included in service name so e.g. fetching uses 'git-upload-pack'
as service) on remote side. Valid replies to this command are
empty line (connection established), 'fallback' (no smart
transport support, fall back to dumb transports) and just
exiting with error message printed (can't connect, don't
bother trying to fall back). After line feed terminating the
positive (empty) response, the output of service starts. After
the connection ends, the remote helper exits.
+
Supported if the helper has the "connect" capability.
If a fatal error occurs, the program writes the error message to
stderr and exits. The caller should expect that a suitable error
message has been printed if the child closes the connection without
completing a valid response for the current command.
Additional commands may be supported, as may be determined from
capabilities reported by the helper.
REF LIST ATTRIBUTES
-------------------
'for-push'::
The caller wants to use the ref list to prepare push
commands. A helper might chose to acquire the ref list by
opening a different type of connection to the destination.
'unchanged'::
This ref is unchanged since the last import or fetch, although
the helper cannot necessarily determine what value that produced.
OPTIONS
-------
'option verbosity' <n>::
Changes the verbosity of messages displayed by the helper.
A value of 0 for <n> means that processes operate
quietly, and the helper produces only error output.
1 is the default level of verbosity, and higher values
of <n> correspond to the number of -v flags passed on the
command line.
'option progress' \{'true'|'false'\}::
Enables (or disables) progress messages displayed by the
transport helper during a command.
'option depth' <depth>::
Deepens the history of a shallow repository.
'option followtags' \{'true'|'false'\}::
If enabled the helper should automatically fetch annotated
tag objects if the object the tag points at was transferred
during the fetch command. If the tag is not fetched by
the helper a second fetch command will usually be sent to
ask for the tag specifically. Some helpers may be able to
use this option to avoid a second network connection.
'option dry-run' \{'true'|'false'\}:
If true, pretend the operation completed successfully,
but don't actually change any repository data. For most
helpers this only applies to the 'push', if supported.
'option servpath <c-style-quoted-path>'::
Sets service path (--upload-pack, --receive-pack etc.) for
next connect. Remote helper may support this option, but
must not rely on this option being set before
connect request occurs.
SEE ALSO
--------
linkgit:git-remote[1]
linkgit:git-remote-testgit[1]
GIT
---
Part of the linkgit:git[1] suite