git/configure.ac
Ævar Arnfjörð Bjarmason 5e9637c629 i18n: add infrastructure for translating Git with gettext
Change the skeleton implementation of i18n in Git to one that can show
localized strings to users for our C, Shell and Perl programs using
either GNU libintl or the Solaris gettext implementation.

This new internationalization support is enabled by default. If
gettext isn't available, or if Git is compiled with
NO_GETTEXT=YesPlease, Git falls back on its current behavior of
showing interface messages in English. When using the autoconf script
we'll auto-detect if the gettext libraries are installed and act
appropriately.

This change is somewhat large because as well as adding a C, Shell and
Perl i18n interface we're adding a lot of tests for them, and for
those tests to work we need a skeleton PO file to actually test
translations. A minimal Icelandic translation is included for this
purpose. Icelandic includes multi-byte characters which makes it easy
to test various edge cases, and it's a language I happen to
understand.

The rest of the commit message goes into detail about various
sub-parts of this commit.

= Installation

Gettext .mo files will be installed and looked for in the standard
$(prefix)/share/locale path. GIT_TEXTDOMAINDIR can also be set to
override that, but that's only intended to be used to test Git itself.

= Perl

Perl code that's to be localized should use the new Git::I18n
module. It imports a __ function into the caller's package by default.

Instead of using the high level Locale::TextDomain interface I've
opted to use the low-level (equivalent to the C interface)
Locale::Messages module, which Locale::TextDomain itself uses.

Locale::TextDomain does a lot of redundant work we don't need, and
some of it would potentially introduce bugs. It tries to set the
$TEXTDOMAIN based on package of the caller, and has its own
hardcoded paths where it'll search for messages.

I found it easier just to completely avoid it rather than try to
circumvent its behavior. In any case, this is an issue wholly
internal Git::I18N. Its guts can be changed later if that's deemed
necessary.

See <AANLkTilYD_NyIZMyj9dHtVk-ylVBfvyxpCC7982LWnVd@mail.gmail.com> for
a further elaboration on this topic.

= Shell

Shell code that's to be localized should use the git-sh-i18n
library. It's basically just a wrapper for the system's gettext.sh.

If gettext.sh isn't available we'll fall back on gettext(1) if it's
available. The latter is available without the former on Solaris,
which has its own non-GNU gettext implementation. We also need to
emulate eval_gettext() there.

If neither are present we'll use a dumb printf(1) fall-through
wrapper.

= About libcharset.h and langinfo.h

We use libcharset to query the character set of the current locale if
it's available. I.e. we'll use it instead of nl_langinfo if
HAVE_LIBCHARSET_H is set.

The GNU gettext manual recommends using langinfo.h's
nl_langinfo(CODESET) to acquire the current character set, but on
systems that have libcharset.h's locale_charset() using the latter is
either saner, or the only option on those systems.

GNU and Solaris have a nl_langinfo(CODESET), FreeBSD can use either,
but MinGW and some others need to use libcharset.h's locale_charset()
instead.

=Credits

This patch is based on work by Jeff Epler <jepler@unpythonic.net> who
did the initial Makefile / C work, and a lot of comments from the Git
mailing list, including Jonathan Nieder, Jakub Narebski, Johannes
Sixt, Erik Faye-Lund, Peter Krefting, Junio C Hamano, Thomas Rast and
others.

[jc: squashed a small Makefile fix from Ramsay]

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-05 20:46:55 -08:00

1027 lines
29 KiB
Plaintext

# -*- Autoconf -*-
# Process this file with autoconf to produce a configure script.
AC_PREREQ(2.59)
AC_INIT([git], [@@GIT_VERSION@@], [git@vger.kernel.org])
AC_CONFIG_SRCDIR([git.c])
config_file=config.mak.autogen
config_append=config.mak.append
config_in=config.mak.in
echo "# ${config_append}. Generated by configure." > "${config_append}"
## Definitions of macros
# GIT_CONF_APPEND_LINE(LINE)
# --------------------------
# Append LINE to file ${config_append}
AC_DEFUN([GIT_CONF_APPEND_LINE],
[echo "$1" >> "${config_append}"])# GIT_CONF_APPEND_LINE
#
# GIT_ARG_SET_PATH(PROGRAM)
# -------------------------
# Provide --with-PROGRAM=PATH option to set PATH to PROGRAM
# Optional second argument allows setting NO_PROGRAM=YesPlease if
# --without-PROGRAM version used.
AC_DEFUN([GIT_ARG_SET_PATH],
[AC_ARG_WITH([$1],
[AS_HELP_STRING([--with-$1=PATH],
[provide PATH to $1])],
[GIT_CONF_APPEND_PATH($1,$2)],[])
])# GIT_ARG_SET_PATH
#
# GIT_CONF_APPEND_PATH(PROGRAM)
# ------------------------------
# Parse --with-PROGRAM=PATH option to set PROGRAM_PATH=PATH
# Used by GIT_ARG_SET_PATH(PROGRAM)
# Optional second argument allows setting NO_PROGRAM=YesPlease if
# --without-PROGRAM is used.
AC_DEFUN([GIT_CONF_APPEND_PATH],
[PROGRAM=m4_toupper($1); \
if test "$withval" = "no"; then \
if test -n "$2"; then \
m4_toupper($1)_PATH=$withval; \
AC_MSG_NOTICE([Disabling use of ${PROGRAM}]); \
GIT_CONF_APPEND_LINE(NO_${PROGRAM}=YesPlease); \
GIT_CONF_APPEND_LINE(${PROGRAM}_PATH=); \
else \
AC_MSG_ERROR([You cannot use git without $1]); \
fi; \
else \
if test "$withval" = "yes"; then \
AC_MSG_WARN([You should provide path for --with-$1=PATH]); \
else \
m4_toupper($1)_PATH=$withval; \
AC_MSG_NOTICE([Setting m4_toupper($1)_PATH to $withval]); \
GIT_CONF_APPEND_LINE(${PROGRAM}_PATH=$withval); \
fi; \
fi; \
]) # GIT_CONF_APPEND_PATH
#
# GIT_PARSE_WITH(PACKAGE)
# -----------------------
# For use in AC_ARG_WITH action-if-found, for packages default ON.
# * Set NO_PACKAGE=YesPlease for --without-PACKAGE
# * Set PACKAGEDIR=PATH for --with-PACKAGE=PATH
# * Unset NO_PACKAGE for --with-PACKAGE without ARG
AC_DEFUN([GIT_PARSE_WITH],
[PACKAGE=m4_toupper($1); \
if test "$withval" = "no"; then \
m4_toupper(NO_$1)=YesPlease; \
elif test "$withval" = "yes"; then \
m4_toupper(NO_$1)=; \
else \
m4_toupper(NO_$1)=; \
m4_toupper($1)DIR=$withval; \
AC_MSG_NOTICE([Setting m4_toupper($1)DIR to $withval]); \
GIT_CONF_APPEND_LINE(${PACKAGE}DIR=$withval); \
fi \
])# GIT_PARSE_WITH
#
# GIT_PARSE_WITH_SET_MAKE_VAR(WITHNAME, VAR, HELP_TEXT)
# ---------------------
# Set VAR to the value specied by --with-WITHNAME.
# No verification of arguments is performed, but warnings are issued
# if either 'yes' or 'no' is specified.
# HELP_TEXT is presented when --help is called.
# This is a direct way to allow setting variables in the Makefile.
AC_DEFUN([GIT_PARSE_WITH_SET_MAKE_VAR],
[AC_ARG_WITH([$1],
[AS_HELP_STRING([--with-$1=VALUE], $3)],
if test -n "$withval"; then \
if test "$withval" = "yes" -o "$withval" = "no"; then \
AC_MSG_WARN([You likely do not want either 'yes' or 'no' as]
[a value for $1 ($2). Maybe you do...?]); \
fi; \
\
AC_MSG_NOTICE([Setting $2 to $withval]); \
GIT_CONF_APPEND_LINE($2=$withval); \
fi)])# GIT_PARSE_WITH_SET_MAKE_VAR
dnl
dnl GIT_CHECK_FUNC(FUNCTION, IFTRUE, IFFALSE)
dnl -----------------------------------------
dnl Similar to AC_CHECK_FUNC, but on systems that do not generate
dnl warnings for missing prototypes (e.g. FreeBSD when compiling without
dnl -Wall), it does not work. By looking for function definition in
dnl libraries, this problem can be worked around.
AC_DEFUN([GIT_CHECK_FUNC],[AC_CHECK_FUNC([$1],[
AC_SEARCH_LIBS([$1],,
[$2],[$3])
],[$3])])
dnl
dnl GIT_STASH_FLAGS(BASEPATH_VAR)
dnl -----------------------------
dnl Allow for easy stashing of LDFLAGS and CPPFLAGS before running
dnl tests that may want to take user settings into account.
AC_DEFUN([GIT_STASH_FLAGS],[
if test -n "$1"; then
old_CPPFLAGS="$CPPFLAGS"
old_LDFLAGS="$LDFLAGS"
CPPFLAGS="-I$1/include $CPPFLAGS"
LDFLAGS="-L$1/$lib $LDFLAGS"
fi
])
dnl
dnl GIT_UNSTASH_FLAGS(BASEPATH_VAR)
dnl -----------------------------
dnl Restore the stashed *FLAGS values.
AC_DEFUN([GIT_UNSTASH_FLAGS],[
if test -n "$1"; then
CPPFLAGS="$old_CPPFLAGS"
LDFLAGS="$old_LDFLAGS"
fi
])
## Site configuration related to programs (before tests)
## --with-PACKAGE[=ARG] and --without-PACKAGE
#
# Set lib to alternative name of lib directory (e.g. lib64)
AC_ARG_WITH([lib],
[AS_HELP_STRING([--with-lib=ARG],
[ARG specifies alternative name for lib directory])],
[if test "$withval" = "no" || test "$withval" = "yes"; then \
AC_MSG_WARN([You should provide name for --with-lib=ARG]); \
else \
lib=$withval; \
AC_MSG_NOTICE([Setting lib to '$lib']); \
GIT_CONF_APPEND_LINE(lib=$withval); \
fi; \
],[])
if test -z "$lib"; then
AC_MSG_NOTICE([Setting lib to 'lib' (the default)])
lib=lib
fi
AC_ARG_ENABLE([pthreads],
[AS_HELP_STRING([--enable-pthreads=FLAGS],
[FLAGS is the value to pass to the compiler to enable POSIX Threads.]
[The default if FLAGS is not specified is to try first -pthread]
[and then -lpthread.]
[--without-pthreads will disable threading.])],
[
if test "x$enableval" = "xyes"; then
AC_MSG_NOTICE([Will try -pthread then -lpthread to enable POSIX Threads])
elif test "x$enableval" != "xno"; then
PTHREAD_CFLAGS=$enableval
AC_MSG_NOTICE([Setting '$PTHREAD_CFLAGS' as the FLAGS to enable POSIX Threads])
else
AC_MSG_NOTICE([POSIX Threads will be disabled.])
NO_PTHREADS=YesPlease
USER_NOPTHREAD=1
fi],
[
AC_MSG_NOTICE([Will try -pthread then -lpthread to enable POSIX Threads.])
])
# Define option to enable JavaScript minification
AC_ARG_ENABLE([jsmin],
[AS_HELP_STRING([--enable-jsmin=PATH],
[PATH is the name of a JavaScript minifier or the absolute path to one.])],
[
JSMIN=$enableval;
AC_MSG_NOTICE([Setting JSMIN to '$JSMIN' to enable JavaScript minifying])
GIT_CONF_APPEND_LINE(JSMIN=$enableval);
])
# Define option to enable CSS minification
AC_ARG_ENABLE([cssmin],
[AS_HELP_STRING([--enable-cssmin=PATH],
[PATH is the name of a CSS minifier or the absolute path to one.])],
[
CSSMIN=$enableval;
AC_MSG_NOTICE([Setting CSSMIN to '$CSSMIN' to enable CSS minifying])
GIT_CONF_APPEND_LINE(CSSMIN=$enableval);
])
## Site configuration (override autodetection)
## --with-PACKAGE[=ARG] and --without-PACKAGE
AC_MSG_NOTICE([CHECKS for site configuration])
#
# Define NO_SVN_TESTS if you want to skip time-consuming SVN interoperability
# tests. These tests take up a significant amount of the total test time
# but are not needed unless you plan to talk to SVN repos.
#
# Define PPC_SHA1 environment variable when running make to make use of
# a bundled SHA1 routine optimized for PowerPC.
#
# Define NO_OPENSSL environment variable if you do not have OpenSSL.
# This also implies BLK_SHA1.
#
# Define OPENSSLDIR=/foo/bar if your openssl header and library files are in
# /foo/bar/include and /foo/bar/lib directories.
AC_ARG_WITH(openssl,
AS_HELP_STRING([--with-openssl],[use OpenSSL library (default is YES)])
AS_HELP_STRING([], [ARG can be prefix for openssl library and headers]),\
GIT_PARSE_WITH(openssl))
#
# Define USE_LIBPCRE if you have and want to use libpcre. git-grep will be
# able to use Perl-compatible regular expressions.
#
# Define LIBPCREDIR=/foo/bar if your libpcre header and library files are in
# /foo/bar/include and /foo/bar/lib directories.
#
AC_ARG_WITH(libpcre,
AS_HELP_STRING([--with-libpcre],[support Perl-compatible regexes (default is NO)])
AS_HELP_STRING([], [ARG can be also prefix for libpcre library and headers]),
if test "$withval" = "no"; then \
USE_LIBPCRE=; \
elif test "$withval" = "yes"; then \
USE_LIBPCRE=YesPlease; \
else
USE_LIBPCRE=YesPlease; \
LIBPCREDIR=$withval; \
AC_MSG_NOTICE([Setting LIBPCREDIR to $withval]); \
GIT_CONF_APPEND_LINE(LIBPCREDIR=$withval); \
fi \
)
#
# Define NO_CURL if you do not have curl installed. git-http-pull and
# git-http-push are not built, and you cannot use http:// and https://
# transports.
#
# Define CURLDIR=/foo/bar if your curl header and library files are in
# /foo/bar/include and /foo/bar/lib directories.
AC_ARG_WITH(curl,
AS_HELP_STRING([--with-curl],[support http(s):// transports (default is YES)])
AS_HELP_STRING([], [ARG can be also prefix for curl library and headers]),
GIT_PARSE_WITH(curl))
#
# Define NO_EXPAT if you do not have expat installed. git-http-push is
# not built, and you cannot push using http:// and https:// transports.
#
# Define EXPATDIR=/foo/bar if your expat header and library files are in
# /foo/bar/include and /foo/bar/lib directories.
AC_ARG_WITH(expat,
AS_HELP_STRING([--with-expat],
[support git-push using http:// and https:// transports via WebDAV (default is YES)])
AS_HELP_STRING([], [ARG can be also prefix for expat library and headers]),
GIT_PARSE_WITH(expat))
#
# Define NO_FINK if you are building on Darwin/Mac OS X, have Fink
# installed in /sw, but don't want GIT to link against any libraries
# installed there. If defined you may specify your own (or Fink's)
# include directories and library directories by defining CFLAGS
# and LDFLAGS appropriately.
#
# Define NO_DARWIN_PORTS if you are building on Darwin/Mac OS X,
# have DarwinPorts installed in /opt/local, but don't want GIT to
# link against any libraries installed there. If defined you may
# specify your own (or DarwinPort's) include directories and
# library directories by defining CFLAGS and LDFLAGS appropriately.
#
# Define NO_MMAP if you want to avoid mmap.
#
# Define NO_ICONV if your libc does not properly support iconv.
AC_ARG_WITH(iconv,
AS_HELP_STRING([--without-iconv],
[if your architecture doesn't properly support iconv])
AS_HELP_STRING([--with-iconv=PATH],
[PATH is prefix for libiconv library and headers])
AS_HELP_STRING([],
[used only if you need linking with libiconv]),
GIT_PARSE_WITH(iconv))
## --enable-FEATURE[=ARG] and --disable-FEATURE
#
# Define USE_NSEC below if you want git to care about sub-second file mtimes
# and ctimes. Note that you need recent glibc (at least 2.2.4) for this, and
# it will BREAK YOUR LOCAL DIFFS! show-diff and anything using it will likely
# randomly break unless your underlying filesystem supports those sub-second
# times (my ext3 doesn't).
#
# Define USE_STDEV below if you want git to care about the underlying device
# change being considered an inode change from the update-index perspective.
#
# Allow user to set ETC_GITCONFIG variable
GIT_PARSE_WITH_SET_MAKE_VAR(gitconfig, ETC_GITCONFIG,
Use VALUE instead of /etc/gitconfig as the
global git configuration file.
If VALUE is not fully qualified it will be interpreted
as a path relative to the computed prefix at runtime.)
#
# Allow user to set ETC_GITATTRIBUTES variable
GIT_PARSE_WITH_SET_MAKE_VAR(gitattributes, ETC_GITATTRIBUTES,
Use VALUE instead of /etc/gitattributes as the
global git attributes file.
If VALUE is not fully qualified it will be interpreted
as a path relative to the computed prefix at runtime.)
#
# Allow user to set the default pager
GIT_PARSE_WITH_SET_MAKE_VAR(pager, DEFAULT_PAGER,
Use VALUE as the fall-back pager instead of 'less'.
This is used by things like 'git log' when the user
does not specify a pager to use through alternate
methods. eg: /usr/bin/pager)
#
# Allow user to set the default editor
GIT_PARSE_WITH_SET_MAKE_VAR(editor, DEFAULT_EDITOR,
Use VALUE as the fall-back editor instead of 'vi'.
This is used by things like 'git commit' when the user
does not specify a preferred editor through other
methods. eg: /usr/bin/editor)
#
# Define SHELL_PATH to provide path to shell.
GIT_ARG_SET_PATH(shell)
#
# Define PERL_PATH to provide path to Perl.
GIT_ARG_SET_PATH(perl)
#
# Define PYTHON_PATH to provide path to Python.
GIT_ARG_SET_PATH(python, allow-without)
#
# Define ZLIB_PATH to provide path to zlib.
GIT_ARG_SET_PATH(zlib)
#
# Declare the with-tcltk/without-tcltk options.
AC_ARG_WITH(tcltk,
AS_HELP_STRING([--with-tcltk],[use Tcl/Tk GUI (default is YES)])
AS_HELP_STRING([],[ARG is the full path to the Tcl/Tk interpreter.])
AS_HELP_STRING([],[Bare --with-tcltk will make the GUI part only if])
AS_HELP_STRING([],[Tcl/Tk interpreter will be found in a system.]),\
GIT_PARSE_WITH(tcltk))
#
## Checks for programs.
AC_MSG_NOTICE([CHECKS for programs])
#
AC_PROG_CC([cc gcc])
AC_C_INLINE
case $ac_cv_c_inline in
inline | yes | no) ;;
*) AC_SUBST([INLINE], [$ac_cv_c_inline]) ;;
esac
# which switch to pass runtime path to dynamic libraries to the linker
AC_CACHE_CHECK([if linker supports -R], git_cv_ld_dashr, [
SAVE_LDFLAGS="${LDFLAGS}"
LDFLAGS="${SAVE_LDFLAGS} -R /"
AC_LINK_IFELSE([AC_LANG_PROGRAM([], [])], [git_cv_ld_dashr=yes], [git_cv_ld_dashr=no])
LDFLAGS="${SAVE_LDFLAGS}"
])
if test "$git_cv_ld_dashr" = "yes"; then
AC_SUBST(CC_LD_DYNPATH, [-R])
else
AC_CACHE_CHECK([if linker supports -Wl,-rpath,], git_cv_ld_wl_rpath, [
SAVE_LDFLAGS="${LDFLAGS}"
LDFLAGS="${SAVE_LDFLAGS} -Wl,-rpath,/"
AC_LINK_IFELSE([AC_LANG_PROGRAM([], [])], [git_cv_ld_wl_rpath=yes], [git_cv_ld_wl_rpath=no])
LDFLAGS="${SAVE_LDFLAGS}"
])
if test "$git_cv_ld_wl_rpath" = "yes"; then
AC_SUBST(CC_LD_DYNPATH, [-Wl,-rpath,])
else
AC_CACHE_CHECK([if linker supports -rpath], git_cv_ld_rpath, [
SAVE_LDFLAGS="${LDFLAGS}"
LDFLAGS="${SAVE_LDFLAGS} -rpath /"
AC_LINK_IFELSE([AC_LANG_PROGRAM([], [])], [git_cv_ld_rpath=yes], [git_cv_ld_rpath=no])
LDFLAGS="${SAVE_LDFLAGS}"
])
if test "$git_cv_ld_rpath" = "yes"; then
AC_SUBST(CC_LD_DYNPATH, [-rpath])
else
AC_MSG_WARN([linker does not support runtime path to dynamic libraries])
fi
fi
fi
#AC_PROG_INSTALL # needs install-sh or install.sh in sources
AC_CHECK_TOOLS(AR, [gar ar], :)
AC_CHECK_PROGS(TAR, [gtar tar])
AC_CHECK_PROGS(DIFF, [gnudiff gdiff diff])
# TCLTK_PATH will be set to some value if we want Tcl/Tk
# or will be empty otherwise.
if test -z "$NO_TCLTK"; then
if test "$with_tcltk" = ""; then
# No Tcl/Tk switches given. Do not check for Tcl/Tk, use bare 'wish'.
TCLTK_PATH=wish
AC_SUBST(TCLTK_PATH)
elif test "$with_tcltk" = "yes"; then
# Tcl/Tk check requested.
AC_CHECK_PROGS(TCLTK_PATH, [wish], )
else
AC_MSG_RESULT([Using Tcl/Tk interpreter $with_tcltk])
TCLTK_PATH="$with_tcltk"
AC_SUBST(TCLTK_PATH)
fi
fi
AC_CHECK_PROGS(ASCIIDOC, [asciidoc])
if test -n "$ASCIIDOC"; then
AC_MSG_CHECKING([for asciidoc version])
asciidoc_version=`$ASCIIDOC --version 2>/dev/null`
case "${asciidoc_version}" in
asciidoc' '7*)
ASCIIDOC7=YesPlease
AC_MSG_RESULT([${asciidoc_version} > 7])
;;
asciidoc' '8*)
ASCIIDOC7=
AC_MSG_RESULT([${asciidoc_version}])
;;
*)
ASCIIDOC7=
AC_MSG_RESULT([${asciidoc_version} (unknown)])
;;
esac
fi
AC_SUBST(ASCIIDOC7)
## Checks for libraries.
AC_MSG_NOTICE([CHECKS for libraries])
#
# Define NO_OPENSSL environment variable if you do not have OpenSSL.
# Define NEEDS_SSL_WITH_CRYPTO if you need -lcrypto with -lssl (Darwin).
GIT_STASH_FLAGS($OPENSSLDIR)
AC_CHECK_LIB([crypto], [SHA1_Init],
[NEEDS_SSL_WITH_CRYPTO=],
[AC_CHECK_LIB([ssl], [SHA1_Init],
[NEEDS_SSL_WITH_CRYPTO=YesPlease],
[NEEDS_SSL_WITH_CRYPTO= NO_OPENSSL=YesPlease])])
GIT_UNSTASH_FLAGS($OPENSSLDIR)
AC_SUBST(NEEDS_SSL_WITH_CRYPTO)
AC_SUBST(NO_OPENSSL)
#
# Define USE_LIBPCRE if you have and want to use libpcre. git-grep will be
# able to use Perl-compatible regular expressions.
#
if test -n "$USE_LIBPCRE"; then
GIT_STASH_FLAGS($LIBPCREDIR)
AC_CHECK_LIB([pcre], [pcre_version],
[USE_LIBPCRE=YesPlease],
[USE_LIBPCRE=])
GIT_UNSTASH_FLAGS($LIBPCREDIR)
AC_SUBST(USE_LIBPCRE)
fi
#
# Define NO_CURL if you do not have libcurl installed. git-http-pull and
# git-http-push are not built, and you cannot use http:// and https://
# transports.
GIT_STASH_FLAGS($CURLDIR)
AC_CHECK_LIB([curl], [curl_global_init],
[NO_CURL=],
[NO_CURL=YesPlease])
GIT_UNSTASH_FLAGS($CURLDIR)
AC_SUBST(NO_CURL)
#
# Define NO_EXPAT if you do not have expat installed. git-http-push is
# not built, and you cannot push using http:// and https:// transports.
GIT_STASH_FLAGS($EXPATDIR)
AC_CHECK_LIB([expat], [XML_ParserCreate],
[NO_EXPAT=],
[NO_EXPAT=YesPlease])
GIT_UNSTASH_FLAGS($EXPATDIR)
AC_SUBST(NO_EXPAT)
#
# Define NEEDS_LIBICONV if linking with libc is not enough (Darwin and
# some Solaris installations).
# Define NO_ICONV if neither libc nor libiconv support iconv.
if test -z "$NO_ICONV"; then
GIT_STASH_FLAGS($ICONVDIR)
AC_DEFUN([ICONVTEST_SRC],
[AC_LANG_PROGRAM([#include <iconv.h>],
[iconv_open("", "");])])
if test -n "$ICONVDIR"; then
lib_order="-liconv -lc"
else
lib_order="-lc -liconv"
fi
NO_ICONV=YesPlease
for l in $lib_order; do
if test "$l" = "-liconv"; then
NEEDS_LIBICONV=YesPlease
else
NEEDS_LIBICONV=
fi
old_LIBS="$LIBS"
LIBS="$LIBS $l"
AC_MSG_CHECKING([for iconv in $l])
AC_LINK_IFELSE([ICONVTEST_SRC],
[AC_MSG_RESULT([yes])
NO_ICONV=
break],
[AC_MSG_RESULT([no])])
LIBS="$old_LIBS"
done
#in case of break
LIBS="$old_LIBS"
GIT_UNSTASH_FLAGS($ICONVDIR)
AC_SUBST(NEEDS_LIBICONV)
AC_SUBST(NO_ICONV)
if test -n "$NO_ICONV"; then
NEEDS_LIBICONV=
fi
fi
#
# Define NO_DEFLATE_BOUND if deflateBound is missing from zlib.
GIT_STASH_FLAGS($ZLIB_PATH)
AC_DEFUN([ZLIBTEST_SRC], [
AC_LANG_PROGRAM([#include <zlib.h>],
[deflateBound(0, 0);])])
AC_MSG_CHECKING([for deflateBound in -lz])
old_LIBS="$LIBS"
LIBS="$LIBS -lz"
AC_LINK_IFELSE([ZLIBTEST_SRC],
[AC_MSG_RESULT([yes])],
[AC_MSG_RESULT([no])
NO_DEFLATE_BOUND=yes])
LIBS="$old_LIBS"
GIT_UNSTASH_FLAGS($ZLIB_PATH)
AC_SUBST(NO_DEFLATE_BOUND)
#
# Define NEEDS_SOCKET if linking with libc is not enough (SunOS,
# Patrick Mauritz).
AC_CHECK_LIB([c], [socket],
[NEEDS_SOCKET=],
[NEEDS_SOCKET=YesPlease])
AC_SUBST(NEEDS_SOCKET)
test -n "$NEEDS_SOCKET" && LIBS="$LIBS -lsocket"
#
# The next few tests will define NEEDS_RESOLV if linking with
# libresolv provides some of the functions we would normally get
# from libc.
NEEDS_RESOLV=
AC_SUBST(NEEDS_RESOLV)
#
# Define NO_INET_NTOP if linking with -lresolv is not enough.
# Solaris 2.7 in particular hos inet_ntop in -lresolv.
NO_INET_NTOP=
AC_SUBST(NO_INET_NTOP)
AC_CHECK_FUNC([inet_ntop],
[],
[AC_CHECK_LIB([resolv], [inet_ntop],
[NEEDS_RESOLV=YesPlease],
[NO_INET_NTOP=YesPlease])
])
#
# Define NO_INET_PTON if linking with -lresolv is not enough.
# Solaris 2.7 in particular hos inet_pton in -lresolv.
NO_INET_PTON=
AC_SUBST(NO_INET_PTON)
AC_CHECK_FUNC([inet_pton],
[],
[AC_CHECK_LIB([resolv], [inet_pton],
[NEEDS_RESOLV=YesPlease],
[NO_INET_PTON=YesPlease])
])
#
# Define NO_HSTRERROR if linking with -lresolv is not enough.
# Solaris 2.6 in particular has no hstrerror, even in -lresolv.
NO_HSTRERROR=
AC_CHECK_FUNC([hstrerror],
[],
[AC_CHECK_LIB([resolv], [hstrerror],
[NEEDS_RESOLV=YesPlease],
[NO_HSTRERROR=YesPlease])
])
AC_SUBST(NO_HSTRERROR)
#
# If any of the above tests determined that -lresolv is needed at
# build-time, also set it here for remaining configure-time checks.
test -n "$NEEDS_RESOLV" && LIBS="$LIBS -lresolv"
AC_CHECK_LIB([c], [basename],
[NEEDS_LIBGEN=],
[NEEDS_LIBGEN=YesPlease])
AC_SUBST(NEEDS_LIBGEN)
test -n "$NEEDS_LIBGEN" && LIBS="$LIBS -lgen"
AC_CHECK_LIB([c], [gettext],
[LIBC_CONTAINS_LIBINTL=YesPlease],
[LIBC_CONTAINS_LIBINTL=])
AC_SUBST(LIBC_CONTAINS_LIBINTL)
test -n "$LIBC_CONTAINS_LIBINTL" || LIBS="$LIBS -lintl"
## Checks for header files.
AC_MSG_NOTICE([CHECKS for header files])
#
# Define NO_SYS_SELECT_H if you don't have sys/select.h.
AC_CHECK_HEADER([sys/select.h],
[NO_SYS_SELECT_H=],
[NO_SYS_SELECT_H=UnfortunatelyYes])
AC_SUBST(NO_SYS_SELECT_H)
#
# Define NO_SYS_POLL_H if you don't have sys/poll.h
AC_CHECK_HEADER([sys/poll.h],
[NO_SYS_POLL_H=],
[NO_SYS_POLL_H=UnfortunatelyYes])
AC_SUBST(NO_SYS_POLL_H)
#
# Define NO_INTTYPES_H if you don't have inttypes.h
AC_CHECK_HEADER([inttypes.h],
[NO_INTTYPES_H=],
[NO_INTTYPES_H=UnfortunatelyYes])
AC_SUBST(NO_INTTYPES_H)
#
# Define OLD_ICONV if your library has an old iconv(), where the second
# (input buffer pointer) parameter is declared with type (const char **).
AC_DEFUN([OLDICONVTEST_SRC], [
AC_LANG_PROGRAM([[
#include <iconv.h>
extern size_t iconv(iconv_t cd,
char **inbuf, size_t *inbytesleft,
char **outbuf, size_t *outbytesleft);
]], [])])
GIT_STASH_FLAGS($ICONVDIR)
AC_MSG_CHECKING([for old iconv()])
AC_COMPILE_IFELSE([OLDICONVTEST_SRC],
[AC_MSG_RESULT([no])],
[AC_MSG_RESULT([yes])
OLD_ICONV=UnfortunatelyYes])
GIT_UNSTASH_FLAGS($ICONVDIR)
AC_SUBST(OLD_ICONV)
## Checks for typedefs, structures, and compiler characteristics.
AC_MSG_NOTICE([CHECKS for typedefs, structures, and compiler characteristics])
#
TYPE_SOCKLEN_T
case $ac_cv_type_socklen_t in
yes) ;;
*) AC_SUBST([SOCKLEN_T], [$git_cv_socklen_t_equiv]) ;;
esac
# Define NO_D_INO_IN_DIRENT if you don't have d_ino in your struct dirent.
AC_CHECK_MEMBER(struct dirent.d_ino,
[NO_D_INO_IN_DIRENT=],
[NO_D_INO_IN_DIRENT=YesPlease],
[#include <dirent.h>])
AC_SUBST(NO_D_INO_IN_DIRENT)
#
# Define NO_D_TYPE_IN_DIRENT if your platform defines DT_UNKNOWN but lacks
# d_type in struct dirent (latest Cygwin -- will be fixed soonish).
AC_CHECK_MEMBER(struct dirent.d_type,
[NO_D_TYPE_IN_DIRENT=],
[NO_D_TYPE_IN_DIRENT=YesPlease],
[#include <dirent.h>])
AC_SUBST(NO_D_TYPE_IN_DIRENT)
#
# Define NO_SOCKADDR_STORAGE if your platform does not have struct
# sockaddr_storage.
AC_CHECK_TYPE(struct sockaddr_storage,
[NO_SOCKADDR_STORAGE=],
[NO_SOCKADDR_STORAGE=YesPlease],[
#include <sys/types.h>
#include <sys/socket.h>
])
AC_SUBST(NO_SOCKADDR_STORAGE)
#
# Define NO_IPV6 if you lack IPv6 support and getaddrinfo().
AC_CHECK_TYPE([struct addrinfo],[
GIT_CHECK_FUNC([getaddrinfo],
[NO_IPV6=],
[NO_IPV6=YesPlease])
],[NO_IPV6=YesPlease],[
#include <sys/types.h>
#include <sys/socket.h>
#include <netdb.h>
])
AC_SUBST(NO_IPV6)
#
# Define NO_REGEX if you have no or inferior regex support in your C library.
AC_CACHE_CHECK([whether the platform regex can handle null bytes],
[ac_cv_c_excellent_regex], [
AC_EGREP_CPP(yippeeyeswehaveit,
AC_LANG_PROGRAM([AC_INCLUDES_DEFAULT
#include <regex.h>
],
[#ifdef REG_STARTEND
yippeeyeswehaveit
#endif
]),
[ac_cv_c_excellent_regex=yes],
[ac_cv_c_excellent_regex=no])
])
if test $ac_cv_c_excellent_regex = yes; then
NO_REGEX=
else
NO_REGEX=YesPlease
fi
AC_SUBST(NO_REGEX)
#
# Define FREAD_READS_DIRECTORIES if your are on a system which succeeds
# when attempting to read from an fopen'ed directory.
AC_CACHE_CHECK([whether system succeeds to read fopen'ed directory],
[ac_cv_fread_reads_directories],
[
AC_RUN_IFELSE(
[AC_LANG_PROGRAM([AC_INCLUDES_DEFAULT],
[[char c;
FILE *f = fopen(".", "r");
return f && fread(&c, 1, 1, f)]])],
[ac_cv_fread_reads_directories=no],
[ac_cv_fread_reads_directories=yes])
])
if test $ac_cv_fread_reads_directories = yes; then
FREAD_READS_DIRECTORIES=UnfortunatelyYes
else
FREAD_READS_DIRECTORIES=
fi
AC_SUBST(FREAD_READS_DIRECTORIES)
#
# Define SNPRINTF_RETURNS_BOGUS if your are on a system which snprintf()
# or vsnprintf() return -1 instead of number of characters which would
# have been written to the final string if enough space had been available.
AC_CACHE_CHECK([whether snprintf() and/or vsnprintf() return bogus value],
[ac_cv_snprintf_returns_bogus],
[
AC_RUN_IFELSE(
[AC_LANG_PROGRAM([AC_INCLUDES_DEFAULT
#include "stdarg.h"
int test_vsnprintf(char *str, size_t maxsize, const char *format, ...)
{
int ret;
va_list ap;
va_start(ap, format);
ret = vsnprintf(str, maxsize, format, ap);
va_end(ap);
return ret;
}],
[[char buf[6];
if (test_vsnprintf(buf, 3, "%s", "12345") != 5
|| strcmp(buf, "12")) return 1;
if (snprintf(buf, 3, "%s", "12345") != 5
|| strcmp(buf, "12")) return 1]])],
[ac_cv_snprintf_returns_bogus=no],
[ac_cv_snprintf_returns_bogus=yes])
])
if test $ac_cv_snprintf_returns_bogus = yes; then
SNPRINTF_RETURNS_BOGUS=UnfortunatelyYes
else
SNPRINTF_RETURNS_BOGUS=
fi
AC_SUBST(SNPRINTF_RETURNS_BOGUS)
## Checks for library functions.
## (in default C library and libraries checked by AC_CHECK_LIB)
AC_MSG_NOTICE([CHECKS for library functions])
#
# Define NO_LIBGEN_H if you don't have libgen.h.
AC_CHECK_HEADER([libgen.h],
[NO_LIBGEN_H=],
[NO_LIBGEN_H=YesPlease])
AC_SUBST(NO_LIBGEN_H)
#
# Define HAVE_PATHS_H if you have paths.h.
AC_CHECK_HEADER([paths.h],
[HAVE_PATHS_H=YesPlease],
[HAVE_PATHS_H=])
AC_SUBST(HAVE_PATHS_H)
#
# Define NO_GETTEXT if you don't want Git output to be translated.
# A translated Git requires GNU libintl or another gettext implementation
AC_CHECK_HEADER([libintl.h],
[NO_GETTEXT=],
[NO_GETTEXT=YesPlease])
AC_SUBST(NO_GETTEXT)
#
# Define HAVE_LIBCHARSET_H if have libcharset.h
AC_CHECK_HEADER([libcharset.h],
[HAVE_LIBCHARSET_H=YesPlease],
[HAVE_LIBCHARSET_H=])
AC_SUBST(HAVE_LIBCHARSET_H)
#
# Define NO_STRCASESTR if you don't have strcasestr.
GIT_CHECK_FUNC(strcasestr,
[NO_STRCASESTR=],
[NO_STRCASESTR=YesPlease])
AC_SUBST(NO_STRCASESTR)
#
# Define NO_STRTOK_R if you don't have strtok_r
GIT_CHECK_FUNC(strtok_r,
[NO_STRTOK_R=],
[NO_STRTOK_R=YesPlease])
AC_SUBST(NO_STRTOK_R)
#
# Define NO_FNMATCH if you don't have fnmatch
GIT_CHECK_FUNC(fnmatch,
[NO_FNMATCH=],
[NO_FNMATCH=YesPlease])
AC_SUBST(NO_FNMATCH)
#
# Define NO_FNMATCH_CASEFOLD if your fnmatch function doesn't have the
# FNM_CASEFOLD GNU extension.
AC_CACHE_CHECK([whether the fnmatch function supports the FNMATCH_CASEFOLD GNU extension],
[ac_cv_c_excellent_fnmatch], [
AC_EGREP_CPP(yippeeyeswehaveit,
AC_LANG_PROGRAM([
#include <fnmatch.h>
],
[#ifdef FNM_CASEFOLD
yippeeyeswehaveit
#endif
]),
[ac_cv_c_excellent_fnmatch=yes],
[ac_cv_c_excellent_fnmatch=no])
])
if test $ac_cv_c_excellent_fnmatch = yes; then
NO_FNMATCH_CASEFOLD=
else
NO_FNMATCH_CASEFOLD=YesPlease
fi
AC_SUBST(NO_FNMATCH_CASEFOLD)
#
# Define NO_MEMMEM if you don't have memmem.
GIT_CHECK_FUNC(memmem,
[NO_MEMMEM=],
[NO_MEMMEM=YesPlease])
AC_SUBST(NO_MEMMEM)
#
# Define NO_STRLCPY if you don't have strlcpy.
GIT_CHECK_FUNC(strlcpy,
[NO_STRLCPY=],
[NO_STRLCPY=YesPlease])
AC_SUBST(NO_STRLCPY)
#
# Define NO_UINTMAX_T if your platform does not have uintmax_t
AC_CHECK_TYPE(uintmax_t,
[NO_UINTMAX_T=],
[NO_UINTMAX_T=YesPlease],[
#include <inttypes.h>
])
AC_SUBST(NO_UINTMAX_T)
#
# Define NO_STRTOUMAX if you don't have strtoumax in the C library.
GIT_CHECK_FUNC(strtoumax,
[NO_STRTOUMAX=],
[NO_STRTOUMAX=YesPlease])
AC_SUBST(NO_STRTOUMAX)
#
# Define NO_SETENV if you don't have setenv in the C library.
GIT_CHECK_FUNC(setenv,
[NO_SETENV=],
[NO_SETENV=YesPlease])
AC_SUBST(NO_SETENV)
#
# Define NO_UNSETENV if you don't have unsetenv in the C library.
GIT_CHECK_FUNC(unsetenv,
[NO_UNSETENV=],
[NO_UNSETENV=YesPlease])
AC_SUBST(NO_UNSETENV)
#
# Define NO_MKDTEMP if you don't have mkdtemp in the C library.
GIT_CHECK_FUNC(mkdtemp,
[NO_MKDTEMP=],
[NO_MKDTEMP=YesPlease])
AC_SUBST(NO_MKDTEMP)
#
# Define NO_MKSTEMPS if you don't have mkstemps in the C library.
GIT_CHECK_FUNC(mkstemps,
[NO_MKSTEMPS=],
[NO_MKSTEMPS=YesPlease])
AC_SUBST(NO_MKSTEMPS)
#
# Define NO_INITGROUPS if you don't have initgroups in the C library.
GIT_CHECK_FUNC(initgroups,
[NO_INITGROUPS=],
[NO_INITGROUPS=YesPlease])
AC_SUBST(NO_INITGROUPS)
#
#
# Define NO_MMAP if you want to avoid mmap.
#
# Define NO_ICONV if your libc does not properly support iconv.
## Other checks.
# Define USE_PIC if you need the main git objects to be built with -fPIC
# in order to build and link perl/Git.so. x86-64 seems to need this.
#
# Define NO_SYMLINK_HEAD if you never want .git/HEAD to be a symbolic link.
# Enable it on Windows. By default, symrefs are still used.
#
# Define NO_PTHREADS if we do not have pthreads.
#
# Define PTHREAD_LIBS to the linker flag used for Pthread support.
AC_DEFUN([PTHREADTEST_SRC], [
AC_LANG_PROGRAM([[
#include <pthread.h>
]], [[
pthread_mutex_t test_mutex;
pthread_key_t test_key;
int retcode = 0;
retcode |= pthread_key_create(&test_key, (void *)0);
retcode |= pthread_mutex_init(&test_mutex,(void *)0);
retcode |= pthread_mutex_lock(&test_mutex);
retcode |= pthread_mutex_unlock(&test_mutex);
return retcode;
]])])
dnl AC_LANG_CONFTEST([AC_LANG_PROGRAM(
dnl [[#include <pthread.h>]],
dnl [[pthread_mutex_t test_mutex;]]
dnl )])
NO_PTHREADS=UnfortunatelyYes
PTHREAD_LIBS=
if test -n "$USER_NOPTHREAD"; then
AC_MSG_NOTICE([Skipping POSIX Threads at user request.])
# handle these separately since PTHREAD_CFLAGS could be '-lpthreads
# -D_REENTRANT' or some such.
elif test -z "$PTHREAD_CFLAGS"; then
threads_found=no
for opt in -mt -pthread -lpthread; do
old_CFLAGS="$CFLAGS"
CFLAGS="$opt $CFLAGS"
AC_MSG_CHECKING([Checking for POSIX Threads with '$opt'])
AC_LINK_IFELSE([PTHREADTEST_SRC],
[AC_MSG_RESULT([yes])
NO_PTHREADS=
PTHREAD_LIBS="$opt"
PTHREAD_CFLAGS="$opt"
threads_found=yes
break
],
[AC_MSG_RESULT([no])])
CFLAGS="$old_CFLAGS"
done
if test $threads_found != yes; then
AC_CHECK_LIB([pthread], [pthread_create],
[PTHREAD_LIBS="-lpthread"],
[NO_PTHREADS=UnfortunatelyYes])
fi
else
old_CFLAGS="$CFLAGS"
CFLAGS="$PTHREAD_CFLAGS $CFLAGS"
AC_MSG_CHECKING([Checking for POSIX Threads with '$PTHREAD_CFLAGS'])
AC_LINK_IFELSE([PTHREADTEST_SRC],
[AC_MSG_RESULT([yes])
NO_PTHREADS=
PTHREAD_LIBS="$PTHREAD_CFLAGS"
],
[AC_MSG_RESULT([no])])
CFLAGS="$old_CFLAGS"
fi
CFLAGS="$old_CFLAGS"
AC_SUBST(PTHREAD_CFLAGS)
AC_SUBST(PTHREAD_LIBS)
AC_SUBST(NO_PTHREADS)
## Output files
AC_CONFIG_FILES(["${config_file}":"${config_in}":"${config_append}"])
AC_OUTPUT
## Cleanup
rm -f "${config_append}"