git/strbuf.h
Junio C Hamano dce1e0b6da Merge branch 'jk/core-comment-string'
core.commentChar used to be limited to a single byte, but has been
updated to allow an arbitrary multi-byte sequence.

* jk/core-comment-string:
  config: add core.commentString
  config: allow multi-byte core.commentChar
  environment: drop comment_line_char compatibility macro
  wt-status: drop custom comment-char stringification
  sequencer: handle multi-byte comment characters when writing todo list
  find multi-byte comment chars in unterminated buffers
  find multi-byte comment chars in NUL-terminated strings
  prefer comment_line_str to comment_line_char for printing
  strbuf: accept a comment string for strbuf_add_commented_lines()
  strbuf: accept a comment string for strbuf_commented_addf()
  strbuf: accept a comment string for strbuf_stripspace()
  environment: store comment_line_char as a string
  strbuf: avoid shadowing global comment_line_char name
  commit: refactor base-case of adjust_comment_line_char()
  strbuf: avoid static variables in strbuf_add_commented_lines()
  strbuf: simplify comment-handling in add_lines() helper
  config: forbid newline as core.commentChar
2024-04-05 10:49:49 -07:00

713 lines
23 KiB
C

#ifndef STRBUF_H
#define STRBUF_H
/*
* NOTE FOR STRBUF DEVELOPERS
*
* strbuf is a low-level primitive; as such it should interact only
* with other low-level primitives. Do not introduce new functions
* which interact with higher-level APIs.
*/
struct string_list;
/**
* strbufs are meant to be used with all the usual C string and memory
* APIs. Given that the length of the buffer is known, it's often better to
* use the mem* functions than a str* one (e.g., memchr vs. strchr).
* Though, one has to be careful about the fact that str* functions often
* stop on NULs and that strbufs may have embedded NULs.
*
* A strbuf is NUL terminated for convenience, but no function in the
* strbuf API actually relies on the string being free of NULs.
*
* strbufs have some invariants that are very important to keep in mind:
*
* - The `buf` member is never NULL, so it can be used in any usual C
* string operations safely. strbufs _have_ to be initialized either by
* `strbuf_init()` or by `= STRBUF_INIT` before the invariants, though.
*
* Do *not* assume anything on what `buf` really is (e.g. if it is
* allocated memory or not), use `strbuf_detach()` to unwrap a memory
* buffer from its strbuf shell in a safe way. That is the sole supported
* way. This will give you a malloced buffer that you can later `free()`.
*
* However, it is totally safe to modify anything in the string pointed by
* the `buf` member, between the indices `0` and `len-1` (inclusive).
*
* - The `buf` member is a byte array that has at least `len + 1` bytes
* allocated. The extra byte is used to store a `'\0'`, allowing the
* `buf` member to be a valid C-string. All strbuf functions ensure this
* invariant is preserved.
*
* NOTE: It is OK to "play" with the buffer directly if you work it this
* way:
*
* strbuf_grow(sb, SOME_SIZE); <1>
* strbuf_setlen(sb, sb->len + SOME_OTHER_SIZE);
*
* <1> Here, the memory array starting at `sb->buf`, and of length
* `strbuf_avail(sb)` is all yours, and you can be sure that
* `strbuf_avail(sb)` is at least `SOME_SIZE`.
*
* NOTE: `SOME_OTHER_SIZE` must be smaller or equal to `strbuf_avail(sb)`.
*
* Doing so is safe, though if it has to be done in many places, adding the
* missing API to the strbuf module is the way to go.
*
* WARNING: Do _not_ assume that the area that is yours is of size `alloc
* - 1` even if it's true in the current implementation. Alloc is somehow a
* "private" member that should not be messed with. Use `strbuf_avail()`
* instead.
*/
/**
* Data Structures
* ---------------
*/
/**
* This is the string buffer structure. The `len` member can be used to
* determine the current length of the string, and `buf` member provides
* access to the string itself.
*/
struct strbuf {
size_t alloc;
size_t len;
char *buf;
};
extern char strbuf_slopbuf[];
#define STRBUF_INIT { .buf = strbuf_slopbuf }
struct object_id;
/**
* Life Cycle Functions
* --------------------
*/
/**
* Initialize the structure. The second parameter can be zero or a bigger
* number to allocate memory, in case you want to prevent further reallocs.
*/
void strbuf_init(struct strbuf *sb, size_t alloc);
/**
* Release a string buffer and the memory it used. After this call, the
* strbuf points to an empty string that does not need to be free()ed, as
* if it had been set to `STRBUF_INIT` and never modified.
*
* To clear a strbuf in preparation for further use without the overhead
* of free()ing and malloc()ing again, use strbuf_reset() instead.
*/
void strbuf_release(struct strbuf *sb);
/**
* Detach the string from the strbuf and returns it; you now own the
* storage the string occupies and it is your responsibility from then on
* to release it with `free(3)` when you are done with it.
*
* The strbuf that previously held the string is reset to `STRBUF_INIT` so
* it can be reused after calling this function.
*/
char *strbuf_detach(struct strbuf *sb, size_t *sz);
/**
* Attach a string to a buffer. You should specify the string to attach,
* the current length of the string and the amount of allocated memory.
* The amount must be larger than the string length, because the string you
* pass is supposed to be a NUL-terminated string. This string _must_ be
* malloc()ed, and after attaching, the pointer cannot be relied upon
* anymore, and neither be free()d directly.
*/
void strbuf_attach(struct strbuf *sb, void *str, size_t len, size_t mem);
/**
* Swap the contents of two string buffers.
*/
static inline void strbuf_swap(struct strbuf *a, struct strbuf *b)
{
SWAP(*a, *b);
}
/**
* Functions related to the size of the buffer
* -------------------------------------------
*/
/**
* Determine the amount of allocated but unused memory.
*/
static inline size_t strbuf_avail(const struct strbuf *sb)
{
return sb->alloc ? sb->alloc - sb->len - 1 : 0;
}
/**
* Ensure that at least this amount of unused memory is available after
* `len`. This is used when you know a typical size for what you will add
* and want to avoid repetitive automatic resizing of the underlying buffer.
* This is never a needed operation, but can be critical for performance in
* some cases.
*/
void strbuf_grow(struct strbuf *sb, size_t amount);
/**
* Set the length of the buffer to a given value. This function does *not*
* allocate new memory, so you should not perform a `strbuf_setlen()` to a
* length that is larger than `len + strbuf_avail()`. `strbuf_setlen()` is
* just meant as a 'please fix invariants from this strbuf I just messed
* with'.
*/
static inline void strbuf_setlen(struct strbuf *sb, size_t len)
{
if (len > (sb->alloc ? sb->alloc - 1 : 0))
BUG("strbuf_setlen() beyond buffer");
sb->len = len;
if (sb->buf != strbuf_slopbuf)
sb->buf[len] = '\0';
else
assert(!strbuf_slopbuf[0]);
}
/**
* Empty the buffer by setting the size of it to zero.
*/
#define strbuf_reset(sb) strbuf_setlen(sb, 0)
/**
* Functions related to the contents of the buffer
* -----------------------------------------------
*/
/**
* Strip whitespace from the beginning (`ltrim`), end (`rtrim`), or both side
* (`trim`) of a string.
*/
void strbuf_trim(struct strbuf *sb);
void strbuf_rtrim(struct strbuf *sb);
void strbuf_ltrim(struct strbuf *sb);
/* Strip trailing directory separators */
void strbuf_trim_trailing_dir_sep(struct strbuf *sb);
/* Strip trailing LF or CR/LF */
void strbuf_trim_trailing_newline(struct strbuf *sb);
/**
* Replace the contents of the strbuf with a reencoded form. Returns -1
* on error, 0 on success.
*/
int strbuf_reencode(struct strbuf *sb, const char *from, const char *to);
/**
* Lowercase each character in the buffer using `tolower`.
*/
void strbuf_tolower(struct strbuf *sb);
/**
* Compare two buffers. Returns an integer less than, equal to, or greater
* than zero if the first buffer is found, respectively, to be less than,
* to match, or be greater than the second buffer.
*/
int strbuf_cmp(const struct strbuf *first, const struct strbuf *second);
/**
* Adding data to the buffer
* -------------------------
*
* NOTE: All of the functions in this section will grow the buffer as
* necessary. If they fail for some reason other than memory shortage and the
* buffer hadn't been allocated before (i.e. the `struct strbuf` was set to
* `STRBUF_INIT`), then they will free() it.
*/
/**
* Add a single character to the buffer.
*/
static inline void strbuf_addch(struct strbuf *sb, int c)
{
if (!strbuf_avail(sb))
strbuf_grow(sb, 1);
sb->buf[sb->len++] = c;
sb->buf[sb->len] = '\0';
}
/**
* Add a character the specified number of times to the buffer.
*/
void strbuf_addchars(struct strbuf *sb, int c, size_t n);
/**
* Insert data to the given position of the buffer. The remaining contents
* will be shifted, not overwritten.
*/
void strbuf_insert(struct strbuf *sb, size_t pos, const void *, size_t);
/**
* Insert a NUL-terminated string to the given position of the buffer.
* The remaining contents will be shifted, not overwritten. It's an
* inline function to allow the compiler to resolve strlen() calls on
* constants at compile time.
*/
static inline void strbuf_insertstr(struct strbuf *sb, size_t pos,
const char *s)
{
strbuf_insert(sb, pos, s, strlen(s));
}
/**
* Insert data to the given position of the buffer giving a printf format
* string. The contents will be shifted, not overwritten.
*/
void strbuf_vinsertf(struct strbuf *sb, size_t pos, const char *fmt,
va_list ap);
__attribute__((format (printf, 3, 4)))
void strbuf_insertf(struct strbuf *sb, size_t pos, const char *fmt, ...);
/**
* Remove given amount of data from a given position of the buffer.
*/
void strbuf_remove(struct strbuf *sb, size_t pos, size_t len);
/**
* Remove the bytes between `pos..pos+len` and replace it with the given
* data.
*/
void strbuf_splice(struct strbuf *sb, size_t pos, size_t len,
const void *data, size_t data_len);
/**
* Add a NUL-terminated string to the buffer. Each line will be prepended
* by a comment character and a blank.
*/
void strbuf_add_commented_lines(struct strbuf *out,
const char *buf, size_t size,
const char *comment_prefix);
/**
* Add data of given length to the buffer.
*/
void strbuf_add(struct strbuf *sb, const void *data, size_t len);
/**
* Add a NUL-terminated string to the buffer.
*
* NOTE: This function will *always* be implemented as an inline or a macro
* using strlen, meaning that this is efficient to write things like:
*
* strbuf_addstr(sb, "immediate string");
*
*/
static inline void strbuf_addstr(struct strbuf *sb, const char *s)
{
strbuf_add(sb, s, strlen(s));
}
/**
* Copy the contents of another buffer at the end of the current one.
*/
void strbuf_addbuf(struct strbuf *sb, const struct strbuf *sb2);
/**
* Join the arguments into a buffer. `delim` is put between every
* two arguments.
*/
const char *strbuf_join_argv(struct strbuf *buf, int argc,
const char **argv, char delim);
/**
* Used with `strbuf_expand_step` to expand the literals %n and %x
* followed by two hexadecimal digits. Returns the number of recognized
* characters.
*/
size_t strbuf_expand_literal(struct strbuf *sb, const char *placeholder);
/**
* If the string pointed to by `formatp` contains a percent sign ("%"),
* advance it to point to the character following the next one and
* return 1, otherwise return 0. Append the substring before that
* percent sign to `sb`, or the whole string if there is none.
*/
int strbuf_expand_step(struct strbuf *sb, const char **formatp);
/**
* Used with `strbuf_expand_step` to report unknown placeholders.
*/
void strbuf_expand_bad_format(const char *format, const char *command);
/**
* Append the contents of one strbuf to another, quoting any
* percent signs ("%") into double-percents ("%%") in the
* destination. This is useful for literal data to be fed to either
* strbuf_expand or to the *printf family of functions.
*/
void strbuf_addbuf_percentquote(struct strbuf *dst, const struct strbuf *src);
#define STRBUF_ENCODE_SLASH 1
/**
* Append the contents of a string to a strbuf, percent-encoding any characters
* that are needed to be encoded for a URL.
*
* If STRBUF_ENCODE_SLASH is set in flags, percent-encode slashes. Otherwise,
* slashes are not percent-encoded.
*/
void strbuf_add_percentencode(struct strbuf *dst, const char *src, int flags);
/**
* Append the given byte size as a human-readable string (i.e. 12.23 KiB,
* 3.50 MiB).
*/
void strbuf_humanise_bytes(struct strbuf *buf, off_t bytes);
/**
* Append the given byte rate as a human-readable string (i.e. 12.23 KiB/s,
* 3.50 MiB/s).
*/
void strbuf_humanise_rate(struct strbuf *buf, off_t bytes);
/**
* Add a formatted string to the buffer.
*/
__attribute__((format (printf,2,3)))
void strbuf_addf(struct strbuf *sb, const char *fmt, ...);
/**
* Add a formatted string prepended by a comment character and a
* blank to the buffer.
*/
__attribute__((format (printf, 3, 4)))
void strbuf_commented_addf(struct strbuf *sb, const char *comment_prefix, const char *fmt, ...);
__attribute__((format (printf,2,0)))
void strbuf_vaddf(struct strbuf *sb, const char *fmt, va_list ap);
/**
* Add the time specified by `tm`, as formatted by `strftime`.
* `tz_offset` is in decimal hhmm format, e.g. -600 means six hours west
* of Greenwich, and it's used to expand %z internally. However, tokens
* with modifiers (e.g. %Ez) are passed to `strftime`.
* `suppress_tz_name`, when set, expands %Z internally to the empty
* string rather than passing it to `strftime`.
*/
void strbuf_addftime(struct strbuf *sb, const char *fmt,
const struct tm *tm, int tz_offset,
int suppress_tz_name);
/**
* Read a given size of data from a FILE* pointer to the buffer.
*
* NOTE: The buffer is rewound if the read fails. If -1 is returned,
* `errno` must be consulted, like you would do for `read(3)`.
* `strbuf_read()`, `strbuf_read_file()` and `strbuf_getline_*()`
* family of functions have the same behaviour as well.
*/
size_t strbuf_fread(struct strbuf *sb, size_t size, FILE *file);
/**
* Read the contents of a given file descriptor. The third argument can be
* used to give a hint about the file size, to avoid reallocs. If read fails,
* any partial read is undone.
*/
ssize_t strbuf_read(struct strbuf *sb, int fd, size_t hint);
/**
* Read the contents of a given file descriptor partially by using only one
* attempt of xread. The third argument can be used to give a hint about the
* file size, to avoid reallocs. Returns the number of new bytes appended to
* the sb.
*/
ssize_t strbuf_read_once(struct strbuf *sb, int fd, size_t hint);
/**
* Read the contents of a file, specified by its path. The third argument
* can be used to give a hint about the file size, to avoid reallocs.
* Return the number of bytes read or a negative value if some error
* occurred while opening or reading the file.
*/
ssize_t strbuf_read_file(struct strbuf *sb, const char *path, size_t hint);
/**
* Read the target of a symbolic link, specified by its path. The third
* argument can be used to give a hint about the size, to avoid reallocs.
*/
int strbuf_readlink(struct strbuf *sb, const char *path, size_t hint);
/**
* Write the whole content of the strbuf to the stream not stopping at
* NUL bytes.
*/
ssize_t strbuf_write(struct strbuf *sb, FILE *stream);
/**
* Read from a FILE * until the specified terminator is encountered,
* overwriting the existing contents of the strbuf.
*
* Reading stops after the terminator or at EOF. The terminator is
* removed from the buffer before returning. If the terminator is LF
* and if it is preceded by a CR, then the whole CRLF is stripped.
* Returns 0 unless there was nothing left before EOF, in which case
* it returns `EOF`.
*/
int strbuf_getdelim_strip_crlf(struct strbuf *sb, FILE *fp, int term);
/**
* Read a line from a FILE *, overwriting the existing contents of
* the strbuf. The strbuf_getline*() family of functions share
* this signature, but have different line termination conventions.
*
* Reading stops after the terminator or at EOF. The terminator
* is removed from the buffer before returning. Returns 0 unless
* there was nothing left before EOF, in which case it returns `EOF`.
*/
typedef int (*strbuf_getline_fn)(struct strbuf *, FILE *);
/* Uses LF as the line terminator */
int strbuf_getline_lf(struct strbuf *sb, FILE *fp);
/* Uses NUL as the line terminator */
int strbuf_getline_nul(struct strbuf *sb, FILE *fp);
/*
* Similar to strbuf_getline_lf(), but additionally treats a CR that
* comes immediately before the LF as part of the terminator.
* This is the most friendly version to be used to read "text" files
* that can come from platforms whose native text format is CRLF
* terminated.
*/
int strbuf_getline(struct strbuf *sb, FILE *file);
/**
* Like `strbuf_getline`, but keeps the trailing terminator (if
* any) in the buffer.
*/
int strbuf_getwholeline(struct strbuf *sb, FILE *file, int term);
/**
* Like `strbuf_getwholeline`, but appends the line instead of
* resetting the buffer first.
*/
int strbuf_appendwholeline(struct strbuf *sb, FILE *file, int term);
/**
* Like `strbuf_getwholeline`, but operates on a file descriptor.
* It reads one character at a time, so it is very slow. Do not
* use it unless you need the correct position in the file
* descriptor.
*/
int strbuf_getwholeline_fd(struct strbuf *sb, int fd, int term);
/**
* Set the buffer to the path of the current working directory.
*/
int strbuf_getcwd(struct strbuf *sb);
/**
* Normalize in-place the path contained in the strbuf. See
* normalize_path_copy() for details. If an error occurs, the contents of "sb"
* are left untouched, and -1 is returned.
*/
int strbuf_normalize_path(struct strbuf *sb);
/**
* Strip whitespace from a buffer. If comment_prefix is non-NULL,
* then lines beginning with that character are considered comments,
* thus removed.
*/
void strbuf_stripspace(struct strbuf *buf, const char *comment_prefix);
static inline int strbuf_strip_suffix(struct strbuf *sb, const char *suffix)
{
if (strip_suffix_mem(sb->buf, &sb->len, suffix)) {
strbuf_setlen(sb, sb->len);
return 1;
} else
return 0;
}
/**
* Split str (of length slen) at the specified terminator character.
* Return a null-terminated array of pointers to strbuf objects
* holding the substrings. The substrings include the terminator,
* except for the last substring, which might be unterminated if the
* original string did not end with a terminator. If max is positive,
* then split the string into at most max substrings (with the last
* substring containing everything following the (max-1)th terminator
* character).
*
* The most generic form is `strbuf_split_buf`, which takes an arbitrary
* pointer/len buffer. The `_str` variant takes a NUL-terminated string,
* the `_max` variant takes a strbuf, and just `strbuf_split` is a convenience
* wrapper to drop the `max` parameter.
*
* For lighter-weight alternatives, see string_list_split() and
* string_list_split_in_place().
*/
struct strbuf **strbuf_split_buf(const char *str, size_t len,
int terminator, int max);
static inline struct strbuf **strbuf_split_str(const char *str,
int terminator, int max)
{
return strbuf_split_buf(str, strlen(str), terminator, max);
}
static inline struct strbuf **strbuf_split_max(const struct strbuf *sb,
int terminator, int max)
{
return strbuf_split_buf(sb->buf, sb->len, terminator, max);
}
static inline struct strbuf **strbuf_split(const struct strbuf *sb,
int terminator)
{
return strbuf_split_max(sb, terminator, 0);
}
/*
* Adds all strings of a string list to the strbuf, separated by the given
* separator. For example, if sep is
* ', '
* and slist contains
* ['element1', 'element2', ..., 'elementN'],
* then write:
* 'element1, element2, ..., elementN'
* to str. If only one element, just write "element1" to str.
*/
void strbuf_add_separated_string_list(struct strbuf *str,
const char *sep,
struct string_list *slist);
/**
* Free a NULL-terminated list of strbufs (for example, the return
* values of the strbuf_split*() functions).
*/
void strbuf_list_free(struct strbuf **list);
/*
* Remove the filename from the provided path string. If the path
* contains a trailing separator, then the path is considered a directory
* and nothing is modified.
*
* Examples:
* - "/path/to/file" -> "/path/to/"
* - "/path/to/dir/" -> "/path/to/dir/"
*/
void strbuf_strip_file_from_path(struct strbuf *sb);
void strbuf_add_lines(struct strbuf *sb,
const char *prefix,
const char *buf,
size_t size);
/**
* Append s to sb, with the characters '<', '>', '&' and '"' converted
* into XML entities.
*/
void strbuf_addstr_xml_quoted(struct strbuf *sb,
const char *s);
/**
* "Complete" the contents of `sb` by ensuring that either it ends with the
* character `term`, or it is empty. This can be used, for example,
* to ensure that text ends with a newline, but without creating an empty
* blank line if there is no content in the first place.
*/
static inline void strbuf_complete(struct strbuf *sb, char term)
{
if (sb->len && sb->buf[sb->len - 1] != term)
strbuf_addch(sb, term);
}
static inline void strbuf_complete_line(struct strbuf *sb)
{
strbuf_complete(sb, '\n');
}
/*
* Copy "name" to "sb", expanding any special @-marks as handled by
* repo_interpret_branch_name(). The result is a non-qualified branch name
* (so "foo" or "origin/master" instead of "refs/heads/foo" or
* "refs/remotes/origin/master").
*
* Note that the resulting name may not be a syntactically valid refname.
*
* If "allowed" is non-zero, restrict the set of allowed expansions. See
* repo_interpret_branch_name() for details.
*/
void strbuf_branchname(struct strbuf *sb, const char *name,
unsigned allowed);
/*
* Like strbuf_branchname() above, but confirm that the result is
* syntactically valid to be used as a local branch name in refs/heads/.
*
* The return value is "0" if the result is valid, and "-1" otherwise.
*/
int strbuf_check_branch_ref(struct strbuf *sb, const char *name);
typedef int (*char_predicate)(char ch);
void strbuf_addstr_urlencode(struct strbuf *sb, const char *name,
char_predicate allow_unencoded_fn);
__attribute__((format (printf,1,2)))
int printf_ln(const char *fmt, ...);
__attribute__((format (printf,2,3)))
int fprintf_ln(FILE *fp, const char *fmt, ...);
char *xstrdup_tolower(const char *);
char *xstrdup_toupper(const char *);
/**
* Create a newly allocated string using printf format. You can do this easily
* with a strbuf, but this provides a shortcut to save a few lines.
*/
__attribute__((format (printf, 1, 0)))
char *xstrvfmt(const char *fmt, va_list ap);
__attribute__((format (printf, 1, 2)))
char *xstrfmt(const char *fmt, ...);
int starts_with(const char *str, const char *prefix);
int istarts_with(const char *str, const char *prefix);
int starts_with_mem(const char *str, size_t len, const char *prefix);
/*
* If the string "str" is the same as the string in "prefix", then the "arg"
* parameter is set to the "def" parameter and 1 is returned.
* If the string "str" begins with the string found in "prefix" and then a
* "=" sign, then the "arg" parameter is set to "str + strlen(prefix) + 1"
* (i.e., to the point in the string right after the prefix and the "=" sign),
* and 1 is returned.
*
* Otherwise, return 0 and leave "arg" untouched.
*
* When we accept both a "--key" and a "--key=<val>" option, this function
* can be used instead of !strcmp(arg, "--key") and then
* skip_prefix(arg, "--key=", &arg) to parse such an option.
*/
int skip_to_optional_arg_default(const char *str, const char *prefix,
const char **arg, const char *def);
static inline int skip_to_optional_arg(const char *str, const char *prefix,
const char **arg)
{
return skip_to_optional_arg_default(str, prefix, arg, "");
}
static inline int ends_with(const char *str, const char *suffix)
{
size_t len;
return strip_suffix(str, suffix, &len);
}
#endif /* STRBUF_H */