git/Documentation/git-add.txt
Petr Baudis 9d5fc59d12 git-add: Make the filename globbing note a bit clearer
I think the trick with Git-side filename globbing is important and perhaps
not that well known.  Clarify a bit in git-add documentation what it means.

Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-08-28 21:16:57 -07:00

242 lines
7.4 KiB
Plaintext

git-add(1)
==========
NAME
----
git-add - Add file contents to the index
SYNOPSIS
--------
[verse]
'git-add' [-n] [-v] [-f] [--interactive | -i] [-u] [--refresh]
[--] <filepattern>...
DESCRIPTION
-----------
This command adds the current content of new or modified files to the
index, thus staging that content for inclusion in the next commit.
The "index" holds a snapshot of the content of the working tree, and it
is this snapshot that is taken as the contents of the next commit. Thus
after making any changes to the working directory, and before running
the commit command, you must use the 'add' command to add any new or
modified files to the index.
This command can be performed multiple times before a commit. It only
adds the content of the specified file(s) at the time the add command is
run; if you want subsequent changes included in the next commit, then
you must run 'git add' again to add the new content to the index.
The 'git status' command can be used to obtain a summary of which
files have changes that are staged for the next commit.
The 'git add' command will not add ignored files by default. If any
ignored files were explicitly specified on the command line, 'git add'
will fail with a list of ignored files. Ignored files reached by
directory recursion or filename globbing performed by Git (quote your
globs before the shell) will be silently ignored. The 'add' command can
be used to add ignored files with the `-f` (force) option.
Please see gitlink:git-commit[1] for alternative ways to add content to a
commit.
OPTIONS
-------
<filepattern>...::
Files to add content from. Fileglobs (e.g. `*.c`) can
be given to add all matching files. Also a
leading directory name (e.g. `dir` to add `dir/file1`
and `dir/file2`) can be given to add all files in the
directory, recursively.
-n::
Don't actually add the file(s), just show if they exist.
-v::
Be verbose.
-f::
Allow adding otherwise ignored files.
-i, \--interactive::
Add modified contents in the working tree interactively to
the index.
-u::
Update only files that git already knows about. This is similar
to what "git commit -a" does in preparation for making a commit,
except that the update is limited to paths specified on the
command line. If no paths are specified, all tracked files are
updated.
\--refresh::
Don't add the file(s), but only refresh their stat()
information in the index.
\--::
This option can be used to separate command-line options from
the list of files, (useful when filenames might be mistaken
for command-line options).
Configuration
-------------
The optional configuration variable 'core.excludesfile' indicates a path to a
file containing patterns of file names to exclude from git-add, similar to
$GIT_DIR/info/exclude. Patterns in the exclude file are used in addition to
those in info/exclude. See link:repository-layout.html[repository layout].
EXAMPLES
--------
git-add Documentation/\\*.txt::
Adds content from all `\*.txt` files under `Documentation`
directory and its subdirectories.
+
Note that the asterisk `\*` is quoted from the shell in this
example; this lets the command to include the files from
subdirectories of `Documentation/` directory.
git-add git-*.sh::
Considers adding content from all git-*.sh scripts.
Because this example lets shell expand the asterisk
(i.e. you are listing the files explicitly), it does not
consider `subdir/git-foo.sh`.
Interactive mode
----------------
When the command enters the interactive mode, it shows the
output of the 'status' subcommand, and then goes into its
interactive command loop.
The command loop shows the list of subcommands available, and
gives a prompt "What now> ". In general, when the prompt ends
with a single '>', you can pick only one of the choices given
and type return, like this:
------------
*** Commands ***
1: status 2: update 3: revert 4: add untracked
5: patch 6: diff 7: quit 8: help
What now> 1
------------
You also could say "s" or "sta" or "status" above as long as the
choice is unique.
The main command loop has 6 subcommands (plus help and quit).
status::
This shows the change between HEAD and index (i.e. what will be
committed if you say "git commit"), and between index and
working tree files (i.e. what you could stage further before
"git commit" using "git-add") for each path. A sample output
looks like this:
+
------------
staged unstaged path
1: binary nothing foo.png
2: +403/-35 +1/-1 git-add--interactive.perl
------------
+
It shows that foo.png has differences from HEAD (but that is
binary so line count cannot be shown) and there is no
difference between indexed copy and the working tree
version (if the working tree version were also different,
'binary' would have been shown in place of 'nothing'). The
other file, git-add--interactive.perl, has 403 lines added
and 35 lines deleted if you commit what is in the index, but
working tree file has further modifications (one addition and
one deletion).
update::
This shows the status information and gives prompt
"Update>>". When the prompt ends with double '>>', you can
make more than one selection, concatenated with whitespace or
comma. Also you can say ranges. E.g. "2-5 7,9" to choose
2,3,4,5,7,9 from the list. You can say '*' to choose
everything.
+
What you chose are then highlighted with '*',
like this:
+
------------
staged unstaged path
1: binary nothing foo.png
* 2: +403/-35 +1/-1 git-add--interactive.perl
------------
+
To remove selection, prefix the input with `-`
like this:
+
------------
Update>> -2
------------
+
After making the selection, answer with an empty line to stage the
contents of working tree files for selected paths in the index.
revert::
This has a very similar UI to 'update', and the staged
information for selected paths are reverted to that of the
HEAD version. Reverting new paths makes them untracked.
add untracked::
This has a very similar UI to 'update' and
'revert', and lets you add untracked paths to the index.
patch::
This lets you choose one path out of 'status' like selection.
After choosing the path, it presents diff between the index
and the working tree file and asks you if you want to stage
the change of each hunk. You can say:
y - add the change from that hunk to index
n - do not add the change from that hunk to index
a - add the change from that hunk and all the rest to index
d - do not the change from that hunk nor any of the rest to index
j - do not decide on this hunk now, and view the next
undecided hunk
J - do not decide on this hunk now, and view the next hunk
k - do not decide on this hunk now, and view the previous
undecided hunk
K - do not decide on this hunk now, and view the previous hunk
+
After deciding the fate for all hunks, if there is any hunk
that was chosen, the index is updated with the selected hunks.
diff::
This lets you review what will be committed (i.e. between
HEAD and index).
See Also
--------
gitlink:git-status[1]
gitlink:git-rm[1]
gitlink:git-mv[1]
gitlink:git-commit[1]
gitlink:git-update-index[1]
Author
------
Written by Linus Torvalds <torvalds@osdl.org>
Documentation
--------------
Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>.
GIT
---
Part of the gitlink:git[7] suite