git/Documentation/githooks.txt
Øystein Walle 5fe8f49b6d Documentation: fix typos in man pages
Signed-off-by: Øystein Walle <oystwa@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-02-05 14:35:45 -08:00

388 lines
14 KiB
Plaintext

githooks(5)
===========
NAME
----
githooks - Hooks used by Git
SYNOPSIS
--------
$GIT_DIR/hooks/*
DESCRIPTION
-----------
Hooks are little scripts you can place in `$GIT_DIR/hooks`
directory to trigger action at certain points. When
'git init' is run, a handful of example hooks are copied into the
`hooks` directory of the new repository, but by default they are
all disabled. To enable a hook, rename it by removing its `.sample`
suffix.
NOTE: It is also a requirement for a given hook to be executable.
However - in a freshly initialized repository - the `.sample` files are
executable by default.
This document describes the currently defined hooks.
HOOKS
-----
applypatch-msg
~~~~~~~~~~~~~~
This hook is invoked by 'git am' script. It takes a single
parameter, the name of the file that holds the proposed commit
log message. Exiting with non-zero status causes
'git am' to abort before applying the patch.
The hook is allowed to edit the message file in place, and can
be used to normalize the message into some project standard
format (if the project has one). It can also be used to refuse
the commit after inspecting the message file.
The default 'applypatch-msg' hook, when enabled, runs the
'commit-msg' hook, if the latter is enabled.
pre-applypatch
~~~~~~~~~~~~~~
This hook is invoked by 'git am'. It takes no parameter, and is
invoked after the patch is applied, but before a commit is made.
If it exits with non-zero status, then the working tree will not be
committed after applying the patch.
It can be used to inspect the current working tree and refuse to
make a commit if it does not pass certain test.
The default 'pre-applypatch' hook, when enabled, runs the
'pre-commit' hook, if the latter is enabled.
post-applypatch
~~~~~~~~~~~~~~~
This hook is invoked by 'git am'. It takes no parameter,
and is invoked after the patch is applied and a commit is made.
This hook is meant primarily for notification, and cannot affect
the outcome of 'git am'.
pre-commit
~~~~~~~~~~
This hook is invoked by 'git commit', and can be bypassed
with `--no-verify` option. It takes no parameter, and is
invoked before obtaining the proposed commit log message and
making a commit. Exiting with non-zero status from this script
causes the 'git commit' to abort.
The default 'pre-commit' hook, when enabled, catches introduction
of lines with trailing whitespaces and aborts the commit when
such a line is found.
All the 'git commit' hooks are invoked with the environment
variable `GIT_EDITOR=:` if the command will not bring up an editor
to modify the commit message.
prepare-commit-msg
~~~~~~~~~~~~~~~~~~
This hook is invoked by 'git commit' right after preparing the
default log message, and before the editor is started.
It takes one to three parameters. The first is the name of the file
that contains the commit log message. The second is the source of the commit
message, and can be: `message` (if a `-m` or `-F` option was
given); `template` (if a `-t` option was given or the
configuration option `commit.template` is set); `merge` (if the
commit is a merge or a `.git/MERGE_MSG` file exists); `squash`
(if a `.git/SQUASH_MSG` file exists); or `commit`, followed by
a commit SHA-1 (if a `-c`, `-C` or `--amend` option was given).
If the exit status is non-zero, 'git commit' will abort.
The purpose of the hook is to edit the message file in place, and
it is not suppressed by the `--no-verify` option. A non-zero exit
means a failure of the hook and aborts the commit. It should not
be used as replacement for pre-commit hook.
The sample `prepare-commit-msg` hook that comes with Git comments
out the `Conflicts:` part of a merge's commit message.
commit-msg
~~~~~~~~~~
This hook is invoked by 'git commit', and can be bypassed
with `--no-verify` option. It takes a single parameter, the
name of the file that holds the proposed commit log message.
Exiting with non-zero status causes the 'git commit' to
abort.
The hook is allowed to edit the message file in place, and can
be used to normalize the message into some project standard
format (if the project has one). It can also be used to refuse
the commit after inspecting the message file.
The default 'commit-msg' hook, when enabled, detects duplicate
"Signed-off-by" lines, and aborts the commit if one is found.
post-commit
~~~~~~~~~~~
This hook is invoked by 'git commit'. It takes no
parameter, and is invoked after a commit is made.
This hook is meant primarily for notification, and cannot affect
the outcome of 'git commit'.
pre-rebase
~~~~~~~~~~
This hook is called by 'git rebase' and can be used to prevent a
branch from getting rebased. The hook may be called with one or
two parameters. The first parameter is the upstream from which
the series was forked. The second parameter is the branch being
rebased, and is not set when rebasing the current branch.
post-checkout
~~~~~~~~~~~~~
This hook is invoked when a 'git checkout' is run after having updated the
worktree. The hook is given three parameters: the ref of the previous HEAD,
the ref of the new HEAD (which may or may not have changed), and a flag
indicating whether the checkout was a branch checkout (changing branches,
flag=1) or a file checkout (retrieving a file from the index, flag=0).
This hook cannot affect the outcome of 'git checkout'.
It is also run after 'git clone', unless the --no-checkout (-n) option is
used. The first parameter given to the hook is the null-ref, the second the
ref of the new HEAD and the flag is always 1.
This hook can be used to perform repository validity checks, auto-display
differences from the previous HEAD if different, or set working dir metadata
properties.
post-merge
~~~~~~~~~~
This hook is invoked by 'git merge', which happens when a 'git pull'
is done on a local repository. The hook takes a single parameter, a status
flag specifying whether or not the merge being done was a squash merge.
This hook cannot affect the outcome of 'git merge' and is not executed,
if the merge failed due to conflicts.
This hook can be used in conjunction with a corresponding pre-commit hook to
save and restore any form of metadata associated with the working tree
(eg: permissions/ownership, ACLS, etc). See contrib/hooks/setgitperms.perl
for an example of how to do this.
pre-push
~~~~~~~~
This hook is called by 'git push' and can be used to prevent a push from taking
place. The hook is called with two parameters which provide the name and
location of the destination remote, if a named remote is not being used both
values will be the same.
Information about what is to be pushed is provided on the hook's standard
input with lines of the form:
<local ref> SP <local sha1> SP <remote ref> SP <remote sha1> LF
For instance, if the command +git push origin master:foreign+ were run the
hook would receive a line like the following:
refs/heads/master 67890 refs/heads/foreign 12345
although the full, 40-character SHA-1s would be supplied. If the foreign ref
does not yet exist the `<remote SHA-1>` will be 40 `0`. If a ref is to be
deleted, the `<local ref>` will be supplied as `(delete)` and the `<local
SHA-1>` will be 40 `0`. If the local commit was specified by something other
than a name which could be expanded (such as `HEAD~`, or a SHA-1) it will be
supplied as it was originally given.
If this hook exits with a non-zero status, 'git push' will abort without
pushing anything. Information about why the push is rejected may be sent
to the user by writing to standard error.
[[pre-receive]]
pre-receive
~~~~~~~~~~~
This hook is invoked by 'git-receive-pack' on the remote repository,
which happens when a 'git push' is done on a local repository.
Just before starting to update refs on the remote repository, the
pre-receive hook is invoked. Its exit status determines the success
or failure of the update.
This hook executes once for the receive operation. It takes no
arguments, but for each ref to be updated it receives on standard
input a line of the format:
<old-value> SP <new-value> SP <ref-name> LF
where `<old-value>` is the old object name stored in the ref,
`<new-value>` is the new object name to be stored in the ref and
`<ref-name>` is the full name of the ref.
When creating a new ref, `<old-value>` is 40 `0`.
If the hook exits with non-zero status, none of the refs will be
updated. If the hook exits with zero, updating of individual refs can
still be prevented by the <<update,'update'>> hook.
Both standard output and standard error output are forwarded to
'git send-pack' on the other end, so you can simply `echo` messages
for the user.
[[update]]
update
~~~~~~
This hook is invoked by 'git-receive-pack' on the remote repository,
which happens when a 'git push' is done on a local repository.
Just before updating the ref on the remote repository, the update hook
is invoked. Its exit status determines the success or failure of
the ref update.
The hook executes once for each ref to be updated, and takes
three parameters:
- the name of the ref being updated,
- the old object name stored in the ref,
- and the new object name to be stored in the ref.
A zero exit from the update hook allows the ref to be updated.
Exiting with a non-zero status prevents 'git-receive-pack'
from updating that ref.
This hook can be used to prevent 'forced' update on certain refs by
making sure that the object name is a commit object that is a
descendant of the commit object named by the old object name.
That is, to enforce a "fast-forward only" policy.
It could also be used to log the old..new status. However, it
does not know the entire set of branches, so it would end up
firing one e-mail per ref when used naively, though. The
<<post-receive,'post-receive'>> hook is more suited to that.
Another use suggested on the mailing list is to use this hook to
implement access control which is finer grained than the one
based on filesystem group.
Both standard output and standard error output are forwarded to
'git send-pack' on the other end, so you can simply `echo` messages
for the user.
The default 'update' hook, when enabled--and with
`hooks.allowunannotated` config option unset or set to false--prevents
unannotated tags to be pushed.
[[post-receive]]
post-receive
~~~~~~~~~~~~
This hook is invoked by 'git-receive-pack' on the remote repository,
which happens when a 'git push' is done on a local repository.
It executes on the remote repository once after all the refs have
been updated.
This hook executes once for the receive operation. It takes no
arguments, but gets the same information as the
<<pre-receive,'pre-receive'>>
hook does on its standard input.
This hook does not affect the outcome of 'git-receive-pack', as it
is called after the real work is done.
This supersedes the <<post-update,'post-update'>> hook in that it gets
both old and new values of all the refs in addition to their
names.
Both standard output and standard error output are forwarded to
'git send-pack' on the other end, so you can simply `echo` messages
for the user.
The default 'post-receive' hook is empty, but there is
a sample script `post-receive-email` provided in the `contrib/hooks`
directory in Git distribution, which implements sending commit
emails.
[[post-update]]
post-update
~~~~~~~~~~~
This hook is invoked by 'git-receive-pack' on the remote repository,
which happens when a 'git push' is done on a local repository.
It executes on the remote repository once after all the refs have
been updated.
It takes a variable number of parameters, each of which is the
name of ref that was actually updated.
This hook is meant primarily for notification, and cannot affect
the outcome of 'git-receive-pack'.
The 'post-update' hook can tell what are the heads that were pushed,
but it does not know what their original and updated values are,
so it is a poor place to do log old..new. The
<<post-receive,'post-receive'>> hook does get both original and
updated values of the refs. You might consider it instead if you need
them.
When enabled, the default 'post-update' hook runs
'git update-server-info' to keep the information used by dumb
transports (e.g., HTTP) up-to-date. If you are publishing
a Git repository that is accessible via HTTP, you should
probably enable this hook.
Both standard output and standard error output are forwarded to
'git send-pack' on the other end, so you can simply `echo` messages
for the user.
pre-auto-gc
~~~~~~~~~~~
This hook is invoked by 'git gc --auto'. It takes no parameter, and
exiting with non-zero status from this script causes the 'git gc --auto'
to abort.
post-rewrite
~~~~~~~~~~~~
This hook is invoked by commands that rewrite commits (`git commit
--amend`, 'git-rebase'; currently 'git-filter-branch' does 'not' call
it!). Its first argument denotes the command it was invoked by:
currently one of `amend` or `rebase`. Further command-dependent
arguments may be passed in the future.
The hook receives a list of the rewritten commits on stdin, in the
format
<old-sha1> SP <new-sha1> [ SP <extra-info> ] LF
The 'extra-info' is again command-dependent. If it is empty, the
preceding SP is also omitted. Currently, no commands pass any
'extra-info'.
The hook always runs after the automatic note copying (see
"notes.rewrite.<command>" in linkgit:git-config.txt[1]) has happened, and
thus has access to these notes.
The following command-specific comments apply:
rebase::
For the 'squash' and 'fixup' operation, all commits that were
squashed are listed as being rewritten to the squashed commit.
This means that there will be several lines sharing the same
'new-sha1'.
+
The commits are guaranteed to be listed in the order that they were
processed by rebase.
GIT
---
Part of the linkgit:git[1] suite