git/Documentation/gitfaq.txt

gitfaq(7)
=========

NAME
----
gitfaq - Frequently asked questions about using Git

SYNOPSIS
--------
gitfaq

DESCRIPTION
-----------

The examples in this FAQ assume a standard POSIX shell, like `bash` or `dash`,
and a user, A U Thor, who has the account `author` on the hosting provider
`git.example.org`.

Configuration
-------------

[[user-name]]
What should I put in `user.name`?::
	You should put your personal name, generally a form using a given name
	and family name.  For example, the current maintainer of Git uses "Junio
	C Hamano".  This will be the name portion that is stored in every commit
	you make.
+
This configuration doesn't have any effect on authenticating to remote services;
for that, see `credential.username` in linkgit:git-config[1].

[[http-postbuffer]]
What does `http.postBuffer` really do?::
	This option changes the size of the buffer that Git uses when pushing
	data to a remote over HTTP or HTTPS.  If the data is larger than this
	size, libcurl, which handles the HTTP support for Git, will use chunked
	transfer encoding since it isn't known ahead of time what the size of
	the pushed data will be.
+
Leaving this value at the default size is fine unless you know that either the
remote server or a proxy in the middle doesn't support HTTP/1.1 (which
introduced the chunked transfer encoding) or is known to be broken with chunked
data.  This is often (erroneously) suggested as a solution for generic push
problems, but since almost every server and proxy supports at least HTTP/1.1,
raising this value usually doesn't solve most push problems.  A server or proxy
that didn't correctly support HTTP/1.1 and chunked transfer encoding wouldn't be
that useful on the Internet today, since it would break lots of traffic.
+
Note that increasing this value will increase the memory used on every relevant
push that Git does over HTTP or HTTPS, since the entire buffer is allocated
regardless of whether or not it is all used.  Thus, it's best to leave it at the
default unless you are sure you need a different value.

[[configure-editor]]
How do I configure a different editor?::
	If you haven't specified an editor specifically for Git, it will by default
	use the editor you've configured using the `VISUAL` or `EDITOR` environment
	variables, or if neither is specified, the system default (which is usually
	`vi`).  Since some people find `vi` difficult to use or prefer a different
	editor, it may be desirable to change the editor used.
+
If you want to configure a general editor for most programs which need one, you
can edit your shell configuration (e.g., `~/.bashrc` or `~/.zshenv`) to contain
a line setting the `EDITOR` or `VISUAL` environment variable to an appropriate
value.  For example, if you prefer the editor `nano`, then you could write the
following:
+
----
export VISUAL=nano
----
+
If you want to configure an editor specifically for Git, you can either set the
`core.editor` configuration value or the `GIT_EDITOR` environment variable.  You
can see linkgit:git-var[1] for details on the order in which these options are
consulted.
+
Note that in all cases, the editor value will be passed to the shell, so any
arguments containing spaces should be appropriately quoted.  Additionally, if
your editor normally detaches from the terminal when invoked, you should specify
it with an argument that makes it not do that, or else Git will not see any
changes.  An example of a configuration addressing both of these issues on
Windows would be the configuration `"C:\Program Files\Vim\gvim.exe" --nofork`,
which quotes the filename with spaces and specifies the `--nofork` option to
avoid backgrounding the process.

Credentials
-----------

[[http-credentials]]
How do I specify my credentials when pushing over HTTP?::
	The easiest way to do this is to use a credential helper via the
	`credential.helper` configuration.  Most systems provide a standard
	choice to integrate with the system credential manager.  For example,
	Git for Windows provides the `wincred` credential manager, macOS has the
	`osxkeychain` credential manager, and Unix systems with a standard
	desktop environment can use the `libsecret` credential manager.  All of
	these store credentials in an encrypted store to keep your passwords or
	tokens secure.
+
In addition, you can use the `store` credential manager which stores in a file
in your home directory, or the `cache` credential manager, which does not
permanently store your credentials, but does prevent you from being prompted for
them for a certain period of time.
+
You can also just enter your password when prompted.  While it is possible to
place the password (which must be percent-encoded) in the URL, this is not
particularly secure and can lead to accidental exposure of credentials, so it is
not recommended.

[[http-credentials-environment]]
How do I read a password or token from an environment variable?::
	The `credential.helper` configuration option can also take an arbitrary
	shell command that produces the credential protocol on standard output.
	This is useful when passing credentials into a container, for example.
+
Such a shell command can be specified by starting the option value with an
exclamation point.  If your password or token were stored in the `GIT_TOKEN`,
you could run the following command to set your credential helper:
+
----
$ git config credential.helper \
	'!f() { echo username=author; echo "password=$GIT_TOKEN"; };f'
----

[[http-reset-credentials]]
How do I change the password or token I've saved in my credential manager?::
	Usually, if the password or token is invalid, Git will erase it and
	prompt for a new one.  However, there are times when this doesn't always
	happen.  To change the password or token, you can erase the existing
	credentials and then Git will prompt for new ones.  To erase
	credentials, use a syntax like the following (substituting your username
	and the hostname):
+
----
$ echo url=https://author@git.example.org | git credential reject
----

[[multiple-accounts-http]]
How do I use multiple accounts with the same hosting provider using HTTP?::
	Usually the easiest way to distinguish between these accounts is to use
	the username in the URL.  For example, if you have the accounts `author`
	and `committer` on `git.example.org`, you can use the URLs
	https://author@git.example.org/org1/project1.git and
	https://committer@git.example.org/org2/project2.git.  This way, when you
	use a credential helper, it will automatically try to look up the
	correct credentials for your account.  If you already have a remote set
	up, you can change the URL with something like `git remote set-url
	origin https://author@git.example.org/org1/project1.git` (see
	linkgit:git-remote[1] for details).

[[multiple-accounts-ssh]]
How do I use multiple accounts with the same hosting provider using SSH?::
	With most hosting providers that support SSH, a single key pair uniquely
	identifies a user.  Therefore, to use multiple accounts, it's necessary
	to create a key pair for each account.  If you're using a reasonably
	modern OpenSSH version, you can create a new key pair with something
	like `ssh-keygen -t ed25519 -f ~/.ssh/id_committer`.  You can then
	register the public key (in this case, `~/.ssh/id_committer.pub`; note
	the `.pub`) with the hosting provider.
+
Most hosting providers use a single SSH account for pushing; that is, all users
push to the `git` account (e.g., `git@git.example.org`).  If that's the case for
your provider, you can set up multiple aliases in SSH to make it clear which key
pair to use.  For example, you could write something like the following in
`~/.ssh/config`, substituting the proper private key file:
+
----
# This is the account for author on git.example.org.
Host example_author
	HostName git.example.org
	User git
	# This is the key pair registered for author with git.example.org.
	IdentityFile ~/.ssh/id_author
	IdentitiesOnly yes
# This is the account for committer on git.example.org.
Host example_committer
	HostName git.example.org
	User git
	# This is the key pair registered for committer with git.example.org.
	IdentityFile ~/.ssh/id_committer
	IdentitiesOnly yes
----
+
Then, you can adjust your push URL to use `git@example_author` or
`git@example_committer` instead of `git@example.org` (e.g., `git remote set-url
git@example_author:org1/project1.git`).

Transfers
---------

[[sync-working-tree]]
How do I sync a working tree across systems?::
	First, decide whether you want to do this at all.  Git works best when you
	push or pull your work using the typical `git push` and `git fetch` commands
	and isn't designed to share a working tree across systems.  This is
	potentially risky and in some cases can cause repository corruption or data
	loss.
+
Usually, doing so will cause `git status` to need to re-read every file in the
working tree.  Additionally, Git's security model does not permit sharing a
working tree across untrusted users, so it is only safe to sync a working tree
if it will only be used by a single user across all machines.
+
It is important not to use a cloud syncing service to sync any portion of a Git
repository, since this can cause corruption, such as missing objects, changed
or added files, broken refs, and a wide variety of other problems.  These
services tend to sync file by file on a continuous basis and don't understand
the structure of a Git repository.  This is especially bad if they sync the
repository in the middle of it being updated, since that is very likely to
cause incomplete or partial updates and therefore data loss.
+
An example of the kind of corruption that can occur is conflicts over the state
of refs, such that both sides end up with different commits on a branch that
the other doesn't have.  This can result in important objects becoming
unreferenced and possibly pruned by `git gc`, causing data loss.
+
Therefore, it's better to push your work to either the other system or a central
server using the normal push and pull mechanism.  However, this doesn't always
preserve important data, like stashes, so some people prefer to share a working
tree across systems.
+
If you do this, the recommended approach is to use `rsync -a --delete-after`
(ideally with an encrypted connection such as with `ssh`) on the root of
repository.  You should ensure several things when you do this:
+
* If you have additional worktrees or a separate Git directory, they must be
  synced at the same time as the main working tree and repository.
* You are comfortable with the destination directory being an exact copy of the
  source directory, _deleting any data that is already there_.
* The repository (including all worktrees and the Git directory) is in a
  quiescent state for the duration of the transfer (that is, no operations of
  any sort are taking place on it, including background operations like `git
  gc` and operations invoked by your editor).
+
Be aware that even with these recommendations, syncing in this way has some risk
since it bypasses Git's normal integrity checking for repositories, so having
backups is advised.  You may also wish to do a `git fsck` to verify the
integrity of your data on the destination system after syncing.

Common Issues
-------------

[[last-commit-amend]]
I've made a mistake in the last commit.  How do I change it?::
	You can make the appropriate change to your working tree, run `git add
	<file>` or `git rm <file>`, as appropriate, to stage it, and then `git
	commit --amend`.  Your change will be included in the commit, and you'll
	be prompted to edit the commit message again; if you wish to use the
	original message verbatim, you can use the `--no-edit` option to `git
	commit` in addition, or just save and quit when your editor opens.

[[undo-previous-change]]
I've made a change with a bug and it's been included in the main branch.  How should I undo it?::
	The usual way to deal with this is to use `git revert`.  This preserves
	the history that the original change was made and was a valuable
	contribution, but also introduces a new commit that undoes those changes
	because the original had a problem.  The commit message of the revert
	indicates the commit which was reverted and is usually edited to include
	an explanation as to why the revert was made.

[[ignore-tracked-files]]
How do I ignore changes to a tracked file?::
	Git doesn't provide a way to do this.  The reason is that if Git needs
	to overwrite this file, such as during a checkout, it doesn't know
	whether the changes to the file are precious and should be kept, or
	whether they are irrelevant and can safely be destroyed.  Therefore, it
	has to take the safe route and always preserve them.
+
It's tempting to try to use certain features of `git update-index`, namely the
assume-unchanged and skip-worktree bits, but these don't work properly for this
purpose and shouldn't be used this way.
+
If your goal is to modify a configuration file, it can often be helpful to have
a file checked into the repository which is a template or set of defaults which
can then be copied alongside and modified as appropriate.  This second, modified
file is usually ignored to prevent accidentally committing it.

[[files-in-gitignore-are-tracked]]
I asked Git to ignore various files, yet they are still tracked::
	A `gitignore` file ensures that certain file(s) which are not
	tracked by Git remain untracked.  However, sometimes particular
	file(s) may have been tracked before adding them into the
	`.gitignore`, hence they still remain tracked.  To untrack and
	ignore files/patterns, use `git rm --cached <file/pattern>`
	and add a pattern to `.gitignore` that matches the <file>.
	See linkgit:gitignore[5] for details.

[[fetching-and-pulling]]
How do I know if I want to do a fetch or a pull?::
	A fetch stores a copy of the latest changes from the remote
	repository, without modifying the working tree or current branch.
	You can then at your leisure inspect, merge, rebase on top of, or
	ignore the upstream changes.  A pull consists of a fetch followed
	immediately by either a merge or rebase.  See linkgit:git-pull[1].

[[proxy]]
Can I use a proxy with Git?::
	Yes, Git supports the use of proxies.  Git honors the standard `http_proxy`,
	`https_proxy`, and `no_proxy` environment variables commonly used on Unix, and
	it also can be configured with `http.proxy` and similar options for HTTPS (see
	linkgit:git-config[1]).  The `http.proxy` and related options can be
	customized on a per-URL pattern basis.  In addition, Git can in theory
	function normally with transparent proxies that exist on the network.
+
For SSH, Git can support a proxy using OpenSSH's `ProxyCommand`. Commonly used
tools include `netcat` and `socat`.  However, they must be configured not to
exit when seeing EOF on standard input, which usually means that `netcat` will
require `-q` and `socat` will require a timeout with something like `-t 10`.
This is required because the way the Git SSH server knows that no more requests
will be made is an EOF on standard input, but when that happens, the server may
not have yet processed the final request, so dropping the connection at that
point would interrupt that request.
+
An example configuration entry in `~/.ssh/config` with an HTTP proxy might look
like this:
+
----
Host git.example.org
    User git
    ProxyCommand socat -t 10 - PROXY:proxy.example.org:%h:%p,proxyport=8080
----
+
Note that in all cases, for Git to work properly, the proxy must be completely
transparent.  The proxy cannot modify, tamper with, or buffer the connection in
any way, or Git will almost certainly fail to work.  Note that many proxies,
including many TLS middleboxes, Windows antivirus and firewall programs other
than Windows Defender and Windows Firewall, and filtering proxies fail to meet
this standard, and as a result end up breaking Git.  Because of the many
reports of problems and their poor security history, we recommend against the
use of these classes of software and devices.

Merging and Rebasing
--------------------

[[long-running-squash-merge]]
What kinds of problems can occur when merging long-lived branches with squash merges?::
	In general, there are a variety of problems that can occur when using squash
	merges to merge two branches multiple times.  These can include seeing extra
	commits in `git log` output, with a GUI, or when using the `...` notation to
	express a range, as well as the possibility of needing to re-resolve conflicts
	again and again.
+
When Git does a normal merge between two branches, it considers exactly three
points: the two branches and a third commit, called the _merge base_, which is
usually the common ancestor of the commits.  The result of the merge is the sum
of the changes between the merge base and each head.  When you merge two
branches with a regular merge commit, this results in a new commit which will
end up as a merge base when they're merged again, because there is now a new
common ancestor.  Git doesn't have to consider changes that occurred before the
merge base, so you don't have to re-resolve any conflicts you resolved before.
+
When you perform a squash merge, a merge commit isn't created; instead, the
changes from one side are applied as a regular commit to the other side.  This
means that the merge base for these branches won't have changed, and so when Git
goes to perform its next merge, it considers all of the changes that it
considered the last time plus the new changes.  That means any conflicts may
need to be re-resolved.  Similarly, anything using the `...` notation in `git
diff`, `git log`, or a GUI will result in showing all of the changes since the
original merge base.
+
As a consequence, if you want to merge two long-lived branches repeatedly, it's
best to always use a regular merge commit.

[[merge-two-revert-one]]
If I make a change on two branches but revert it on one, why does the merge of those branches include the change?::
	By default, when Git does a merge, it uses a strategy called the `ort`
	strategy, which does a fancy three-way merge.  In such a case, when Git
	performs the merge, it considers exactly three points: the two heads and a
	third point, called the _merge base_, which is usually the common ancestor of
	those commits.  Git does not consider the history or the individual commits
	that have happened on those branches at all.
+
As a result, if both sides have a change and one side has reverted that change,
the result is to include the change.  This is because the code has changed on
one side and there is no net change on the other, and in this scenario, Git
adopts the change.
+
If this is a problem for you, you can do a rebase instead, rebasing the branch
with the revert onto the other branch.  A rebase in this scenario will revert
the change, because a rebase applies each individual commit, including the
revert.  Note that rebases rewrite history, so you should avoid rebasing
published branches unless you're sure you're comfortable with that.  See the
NOTES section in linkgit:git-rebase[1] for more details.

Hooks
-----

[[restrict-with-hooks]]
How do I use hooks to prevent users from making certain changes?::
	The only safe place to make these changes is on the remote repository
	(i.e., the Git server), usually in the `pre-receive` hook or in a
	continuous integration (CI) system.  These are the locations in which
	policy can be enforced effectively.
+
It's common to try to use `pre-commit` hooks (or, for commit messages,
`commit-msg` hooks) to check these things, which is great if you're working as a
solo developer and want the tooling to help you.  However, using hooks on a
developer machine is not effective as a policy control because a user can bypass
these hooks with `--no-verify` without being noticed (among various other ways).
Git assumes that the user is in control of their local repositories and doesn't
try to prevent this or tattle on the user.
+
In addition, some advanced users find `pre-commit` hooks to be an impediment to
workflows that use temporary commits to stage work in progress or that create
fixup commits, so it's better to push these kinds of checks to the server
anyway.

Cross-Platform Issues
---------------------

[[windows-text-binary]]
I'm on Windows and my text files are detected as binary.::
	Git works best when you store text files as UTF-8.  Many programs on
	Windows support UTF-8, but some do not and only use the little-endian
	UTF-16 format, which Git detects as binary.  If you can't use UTF-8 with
	your programs, you can specify a working tree encoding that indicates
	which encoding your files should be checked out with, while still
	storing these files as UTF-8 in the repository.  This allows tools like
	linkgit:git-diff[1] to work as expected, while still allowing your tools
	to work.
+
To do so, you can specify a linkgit:gitattributes[5] pattern with the
`working-tree-encoding` attribute.  For example, the following pattern sets all
C files to use UTF-16LE-BOM, which is a common encoding on Windows:
+
----
*.c	working-tree-encoding=UTF-16LE-BOM
----
+
You will need to run `git add --renormalize` to have this take effect.  Note
that if you are making these changes on a project that is used across platforms,
you'll probably want to make it in a per-user configuration file or in the one
in `$GIT_DIR/info/attributes`, since making it in a `.gitattributes` file in the
repository will apply to all users of the repository.
+
See the following entry for information about normalizing line endings as well,
and see linkgit:gitattributes[5] for more information about attribute files.

[[windows-diff-control-m]]
I'm on Windows and git diff shows my files as having a `^M` at the end.::
	By default, Git expects files to be stored with Unix line endings.  As such,
	the carriage return (`^M`) that is part of a Windows line ending is shown
	because it is considered to be trailing whitespace.  Git defaults to showing
	trailing whitespace only on new lines, not existing ones.
+
You can store the files in the repository with Unix line endings and convert
them automatically to your platform's line endings.  To do that, set the
configuration option `core.eol` to `native` and see
<<recommended-storage-settings,the question on recommended storage settings>>
for information about how to configure files as text or binary.
+
You can also control this behavior with the `core.whitespace` setting if you
don't wish to remove the carriage returns from your line endings.

[[always-modified-files-case]]
Why do I have a file that's always modified?::
	Internally, Git always stores file names as sequences of bytes and doesn't
	perform any encoding or case folding.  However, Windows and macOS by default
	both perform case folding on file names.  As a result, it's possible to end up
	with multiple files or directories whose names differ only in case.  Git can
	handle this just fine, but the file system can store only one of these files,
	so when Git reads the other file to see its contents, it looks modified.
+
It's best to remove one of the files such that you only have one file.  You can
do this with commands like the following (assuming two files `AFile.txt` and
`afile.txt`) on an otherwise clean working tree:
+
----
$ git rm --cached AFile.txt
$ git commit -m 'Remove files conflicting in case'
$ git checkout .
----
+
This avoids touching the disk, but removes the additional file.  Your project
may prefer to adopt a naming convention, such as all-lowercase names, to avoid
this problem from occurring again; such a convention can be checked using a
`pre-receive` hook or as part of a continuous integration (CI) system.
+
It is also possible for perpetually modified files to occur on any platform if a
smudge or clean filter is in use on your system but a file was previously
committed without running the smudge or clean filter.  To fix this, run the
following on an otherwise clean working tree:
+
----
$ git add --renormalize .
----

[[recommended-storage-settings]]
What's the recommended way to store files in Git?::
	While Git can store and handle any file of any type, there are some
	settings that work better than others.  In general, we recommend that
	text files be stored in UTF-8 without a byte-order mark (BOM) with LF
	(Unix-style) endings.  We also recommend the use of UTF-8 (again,
	without BOM) in commit messages.  These are the settings that work best
	across platforms and with tools such as `git diff` and `git merge`.
+
Additionally, if you have a choice between storage formats that are text based
or non-text based, we recommend storing files in the text format and, if
necessary, transforming them into the other format.  For example, a text-based
SQL dump with one record per line will work much better for diffing and merging
than an actual database file.  Similarly, text-based formats such as Markdown
and AsciiDoc will work better than binary formats such as Microsoft Word and
PDF.
+
Similarly, storing binary dependencies (e.g., shared libraries or JAR files) or
build products in the repository is generally not recommended.  Dependencies and
build products are best stored on an artifact or package server with only
references, URLs, and hashes stored in the repository.
+
We also recommend setting a linkgit:gitattributes[5] file to explicitly mark
which files are text and which are binary.  If you want Git to guess, you can
set the attribute `text=auto`.
+
With text files, Git will generally ensure that LF endings are used in the
repository.  The `core.autocrlf` and `core.eol` configuration variables specify
what line-ending convention is followed when any text file is checked out.  You
can also use the `eol` attribute (e.g., `eol=crlf`) to override which files get
what line-ending treatment.
+
For example, generally shell files must have LF endings and batch files must
have CRLF endings, so the following might be appropriate in some projects:
+
----
# By default, guess.
*	text=auto
# Mark all C files as text.
*.c	text
# Ensure all shell files have LF endings and all batch files have CRLF
# endings in the working tree and both have LF in the repo.
*.sh text eol=lf
*.bat text eol=crlf
# Mark all JPEG files as binary.
*.jpg	binary
----
+
These settings help tools pick the right format for output such as patches and
result in files being checked out in the appropriate line ending for the
platform.

GIT
---
Part of the linkgit:git[1] suite