Handling of "promisor packs" that allows certain objects to be
missing and lazily retrievable has been optimized (a bit).
* jk/promisor-optim:
revision: avoid parsing with --exclude-promisor-objects
lookup_unknown_object(): take a repository argument
is_promisor_object(): free tree buffer after parsing
Commit e4c7b33747 ("bisect--helper: reimplement `bisect_skip` shell
function in C", 2021-02-03), as part of the shell-to-C conversion,
forgot to read the 'terms' file (.git/BISECT_TERMS) during the new
'bisect skip' command implementation. As a result, the 'bisect skip'
command will use the default 'bad'/'good' terms. If the bisection
terms have been set to non-default values (for example by the
'bisect start' command), then the 'bisect skip' command will fail.
In order to correct this problem, we insert a call to the get_terms()
function, which reads the non-default terms from that file (if set),
in the '--bisect-skip' command implementation of 'bisect--helper'.
Also, add a test[1] to protect against potential future regression.
[1] https://lore.kernel.org/git/xmqqim45h585.fsf@gitster.g/T/#m207791568054b0f8cf1a3942878ea36293273c7d
Reported-by: Trygve Aaberge <trygveaa@gmail.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `git repack -A -d` is run in a partial clone, `pack-objects`
is invoked twice: once to repack all promisor objects, and once to
repack all non-promisor objects. The latter `pack-objects` invocation
is with --exclude-promisor-objects and --unpack-unreachable, which
loosens all objects unused during this invocation. Unfortunately,
this includes promisor objects.
Because the -d argument to `git repack` subsequently deletes all loose
objects also in packs, these just-loosened promisor objects will be
immediately deleted. However, this extra disk churn is unnecessary in
the first place. For example, in a newly-cloned partial repo that
filters all blob objects (e.g. `--filter=blob:none`), `repack` ends up
unpacking all trees and commits into the filesystem because every
object, in this particular case, is a promisor object. Depending on
the repo size, this increases the disk usage considerably: In my copy
of the linux.git, the object directory peaked 26GB of more disk usage.
In order to avoid this extra disk churn, pass the names of the promisor
packfiles as --keep-pack arguments to the second invocation of
`pack-objects`. This informs `pack-objects` that the promisor objects
are already in a safe packfile and, therefore, do not need to be
loosened.
For testing, we need to validate whether any object was loosened.
However, the "evidence" (loosened objects) is deleted during the
process which prevents us from inspecting the object directory.
Instead, let's teach `pack-objects` to count loosened objects and
emit via trace2 thus allowing inspecting the debug events after the
process is finished. This new event is used on the added regression
test.
Lastly, add a new perf test to evaluate the performance impact
made by this changes (tested on git.git):
Test HEAD^ HEAD
----------------------------------------------------------
5600.3: gc 134.38(41.93+90.95) 7.80(6.72+1.35) -94.2%
For a bigger repository, such as linux.git, the improvement is
even bigger:
Test HEAD^ HEAD
-------------------------------------------------------------------
5600.3: gc 6833.00(918.07+3162.74) 268.79(227.02+39.18) -96.1%
These improvements are particular big because every object in the
newly-cloned partial repository is a promisor object.
Reported-by: SZEDER Gábor <szeder.dev@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Helped-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
parse_pathspec() populates pathspec, hence we need to clear it once it's
no longer needed. seen is xcalloc'd within the same function and
likewise needs to be freed once its no longer needed.
cmd_rm() has multiple early returns, therefore we need to clear or free
as soon as this data is no longer needed, as opposed to doing a cleanup
at the end.
LSAN output from t0020:
Direct leak of 112 byte(s) in 1 object(s) allocated from:
#0 0x49a85d in malloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:145:3
#1 0x9ac0a4 in do_xmalloc wrapper.c:41:8
#2 0x9ac07a in xmalloc wrapper.c:62:9
#3 0x873277 in parse_pathspec pathspec.c:582:2
#4 0x646ffa in cmd_rm builtin/rm.c:266:2
#5 0x4cd91d in run_builtin git.c:467:11
#6 0x4cb5f3 in handle_builtin git.c:719:3
#7 0x4ccf47 in run_argv git.c:808:4
#8 0x4caf49 in cmd_main git.c:939:19
#9 0x69dc0e in main common-main.c:52:11
#10 0x7f948825b349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Indirect leak of 65 byte(s) in 1 object(s) allocated from:
#0 0x49ab79 in realloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3
#1 0x9ac2a6 in xrealloc wrapper.c:126:8
#2 0x93b14d in strbuf_grow strbuf.c:98:2
#3 0x93ccf6 in strbuf_vaddf strbuf.c:392:3
#4 0x93f726 in xstrvfmt strbuf.c:979:2
#5 0x93f8b3 in xstrfmt strbuf.c:989:8
#6 0x92ad8a in prefix_path_gently setup.c:115:15
#7 0x873a8d in init_pathspec_item pathspec.c:439:11
#8 0x87334f in parse_pathspec pathspec.c:589:3
#9 0x646ffa in cmd_rm builtin/rm.c:266:2
#10 0x4cd91d in run_builtin git.c:467:11
#11 0x4cb5f3 in handle_builtin git.c:719:3
#12 0x4ccf47 in run_argv git.c:808:4
#13 0x4caf49 in cmd_main git.c:939:19
#14 0x69dc0e in main common-main.c:52:11
#15 0x7f948825b349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Indirect leak of 15 byte(s) in 1 object(s) allocated from:
#0 0x486834 in strdup ../projects/compiler-rt/lib/asan/asan_interceptors.cpp:452:3
#1 0x9ac048 in xstrdup wrapper.c:29:14
#2 0x873ba2 in init_pathspec_item pathspec.c:468:20
#3 0x87334f in parse_pathspec pathspec.c:589:3
#4 0x646ffa in cmd_rm builtin/rm.c:266:2
#5 0x4cd91d in run_builtin git.c:467:11
#6 0x4cb5f3 in handle_builtin git.c:719:3
#7 0x4ccf47 in run_argv git.c:808:4
#8 0x4caf49 in cmd_main git.c:939:19
#9 0x69dc0e in main common-main.c:52:11
#10 0x7f948825b349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Direct leak of 1 byte(s) in 1 object(s) allocated from:
#0 0x49a9d2 in calloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:154:3
#1 0x9ac392 in xcalloc wrapper.c:140:8
#2 0x647108 in cmd_rm builtin/rm.c:294:9
#3 0x4cd91d in run_builtin git.c:467:11
#4 0x4cb5f3 in handle_builtin git.c:719:3
#5 0x4ccf47 in run_argv git.c:808:4
#6 0x4caf49 in cmd_main git.c:939:19
#7 0x69dbfe in main common-main.c:52:11
#8 0x7f4fac1b0349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Signed-off-by: Andrzej Hunt <ajrhunt@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
options.git_format_patch_opt can be populated during cmd_rebase's setup,
and will therefore leak on return. Although we could just UNLEAK all of
options, we choose to strbuf_release() the individual member, which matches
the existing pattern (where we're freeing invidual members of options).
Leak found when running t0021:
Direct leak of 24 byte(s) in 1 object(s) allocated from:
#0 0x49ab79 in realloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3
#1 0x9ac296 in xrealloc wrapper.c:126:8
#2 0x93b13d in strbuf_grow strbuf.c:98:2
#3 0x93bd3a in strbuf_add strbuf.c:295:2
#4 0x60ae92 in strbuf_addstr strbuf.h:304:2
#5 0x605f17 in cmd_rebase builtin/rebase.c:1759:3
#6 0x4cd91d in run_builtin git.c:467:11
#7 0x4cb5f3 in handle_builtin git.c:719:3
#8 0x4ccf47 in run_argv git.c:808:4
#9 0x4caf49 in cmd_main git.c:939:19
#10 0x69dbfe in main common-main.c:52:11
#11 0x7f66dae91349 in __libc_start_main (/lib64/libc.so.6+0x24349)
SUMMARY: AddressSanitizer: 24 byte(s) leaked in 1 allocation(s).
Signed-off-by: Andrzej Hunt <ajrhunt@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
sorting might be a list allocated in ref_default_sorting() (in this case
it's a fixed single item list, which has nevertheless been xcalloc'd),
or it might be a list allocated in parse_opt_ref_sorting(). In either
case we could free these lists - but instead we UNLEAK as we're at the
end of cmd_for_each_ref. (There's no existing implementation of
clear_ref_sorting(), and writing a loop to free the list seems more
trouble than it's worth.)
filter.with_commit/no_commit are populated via
OPT_CONTAINS/OPT_NO_CONTAINS, both of which create new entries via
parse_opt_commits(), and also need to be free'd or UNLEAK'd. Because
free_commit_list() already exists, we choose to use that over an UNLEAK.
LSAN output from t0041:
Direct leak of 16 byte(s) in 1 object(s) allocated from:
#0 0x49a9d2 in calloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:154:3
#1 0x9ac252 in xcalloc wrapper.c:140:8
#2 0x8a4a55 in ref_default_sorting ref-filter.c:2486:32
#3 0x56c6b1 in cmd_for_each_ref builtin/for-each-ref.c:72:13
#4 0x4cd91d in run_builtin git.c:467:11
#5 0x4cb5f3 in handle_builtin git.c:719:3
#6 0x4ccf47 in run_argv git.c:808:4
#7 0x4caf49 in cmd_main git.c:939:19
#8 0x69dabe in main common-main.c:52:11
#9 0x7f2bdc570349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Direct leak of 16 byte(s) in 1 object(s) allocated from:
#0 0x49a85d in malloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:145:3
#1 0x9abf54 in do_xmalloc wrapper.c:41:8
#2 0x9abf2a in xmalloc wrapper.c:62:9
#3 0x717486 in commit_list_insert commit.c:540:33
#4 0x8644cf in parse_opt_commits parse-options-cb.c:98:2
#5 0x869bb5 in get_value parse-options.c:181:11
#6 0x8677dc in parse_long_opt parse-options.c:378:10
#7 0x8659bd in parse_options_step parse-options.c:817:11
#8 0x867fcd in parse_options parse-options.c:870:10
#9 0x56c62b in cmd_for_each_ref builtin/for-each-ref.c:59:2
#10 0x4cd91d in run_builtin git.c:467:11
#11 0x4cb5f3 in handle_builtin git.c:719:3
#12 0x4ccf47 in run_argv git.c:808:4
#13 0x4caf49 in cmd_main git.c:939:19
#14 0x69dabe in main common-main.c:52:11
#15 0x7f2bdc570349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Signed-off-by: Andrzej Hunt <ajrhunt@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
add_pending_object() populates rev.pending, we need to take care of
clearing it once we're done.
This code is run close to the end of a checkout, therefore this leak
seems like it would have very little impact. See also LSAN output
from t0020 below:
Direct leak of 2048 byte(s) in 1 object(s) allocated from:
#0 0x49ab79 in realloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3
#1 0x9acc46 in xrealloc wrapper.c:126:8
#2 0x83e3a3 in add_object_array_with_path object.c:337:3
#3 0x8f672a in add_pending_object_with_path revision.c:329:2
#4 0x8eaeab in add_pending_object_with_mode revision.c:336:2
#5 0x8eae9d in add_pending_object revision.c:342:2
#6 0x5154a0 in show_local_changes builtin/checkout.c:602:2
#7 0x513b00 in merge_working_tree builtin/checkout.c:979:3
#8 0x512cb3 in switch_branches builtin/checkout.c:1242:9
#9 0x50f8de in checkout_branch builtin/checkout.c:1646:9
#10 0x50ba12 in checkout_main builtin/checkout.c:2003:9
#11 0x5086c0 in cmd_checkout builtin/checkout.c:2055:8
#12 0x4cd91d in run_builtin git.c:467:11
#13 0x4cb5f3 in handle_builtin git.c:719:3
#14 0x4ccf47 in run_argv git.c:808:4
#15 0x4caf49 in cmd_main git.c:939:19
#16 0x69e43e in main common-main.c:52:11
#17 0x7f5dd1d50349 in __libc_start_main (/lib64/libc.so.6+0x24349)
SUMMARY: AddressSanitizer: 2048 byte(s) leaked in 1 allocation(s).
Signed-off-by: Andrzej Hunt <ajrhunt@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
parse_pathspec() allocates new memory into pathspec, therefore we need
to free it when we're done.
An UNLEAK would probably be just as good here - but clear_pathspec() is
not much more work so we might as well use it. check_ignore() is either
called once directly from cmd_check_ignore() (in which case the leak
really doesnt matter), or it can be called multiple times in a loop from
check_ignore_stdin_paths(), in which case we're potentially leaking
multiple times - but even in this scenario the leak is so small as to
have no real consequence.
Found while running t0008:
Direct leak of 112 byte(s) in 1 object(s) allocated from:
#0 0x49a85d in malloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:145:3
#1 0x9aca44 in do_xmalloc wrapper.c:41:8
#2 0x9aca1a in xmalloc wrapper.c:62:9
#3 0x873c17 in parse_pathspec pathspec.c:582:2
#4 0x503eb8 in check_ignore builtin/check-ignore.c:90:2
#5 0x5038af in cmd_check_ignore builtin/check-ignore.c:190:17
#6 0x4cd91d in run_builtin git.c:467:11
#7 0x4cb5f3 in handle_builtin git.c:719:3
#8 0x4ccf47 in run_argv git.c:808:4
#9 0x4caf49 in cmd_main git.c:939:19
#10 0x69e43e in main common-main.c:52:11
#11 0x7f18bb0dd349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Indirect leak of 65 byte(s) in 1 object(s) allocated from:
#0 0x49ab79 in realloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3
#1 0x9acc46 in xrealloc wrapper.c:126:8
#2 0x93baed in strbuf_grow strbuf.c:98:2
#3 0x93d696 in strbuf_vaddf strbuf.c:392:3
#4 0x9400c6 in xstrvfmt strbuf.c:979:2
#5 0x940253 in xstrfmt strbuf.c:989:8
#6 0x92b72a in prefix_path_gently setup.c:115:15
#7 0x87442d in init_pathspec_item pathspec.c:439:11
#8 0x873cef in parse_pathspec pathspec.c:589:3
#9 0x503eb8 in check_ignore builtin/check-ignore.c:90:2
#10 0x5038af in cmd_check_ignore builtin/check-ignore.c:190:17
#11 0x4cd91d in run_builtin git.c:467:11
#12 0x4cb5f3 in handle_builtin git.c:719:3
#13 0x4ccf47 in run_argv git.c:808:4
#14 0x4caf49 in cmd_main git.c:939:19
#15 0x69e43e in main common-main.c:52:11
#16 0x7f18bb0dd349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Indirect leak of 2 byte(s) in 1 object(s) allocated from:
#0 0x486834 in strdup ../projects/compiler-rt/lib/asan/asan_interceptors.cpp:452:3
#1 0x9ac9e8 in xstrdup wrapper.c:29:14
#2 0x874542 in init_pathspec_item pathspec.c:468:20
#3 0x873cef in parse_pathspec pathspec.c:589:3
#4 0x503eb8 in check_ignore builtin/check-ignore.c:90:2
#5 0x5038af in cmd_check_ignore builtin/check-ignore.c:190:17
#6 0x4cd91d in run_builtin git.c:467:11
#7 0x4cb5f3 in handle_builtin git.c:719:3
#8 0x4ccf47 in run_argv git.c:808:4
#9 0x4caf49 in cmd_main git.c:939:19
#10 0x69e43e in main common-main.c:52:11
#11 0x7f18bb0dd349 in __libc_start_main (/lib64/libc.so.6+0x24349)
SUMMARY: AddressSanitizer: 179 byte(s) leaked in 3 allocation(s).
Signed-off-by: Andrzej Hunt <ajrhunt@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
prefix_filename() returns newly allocated memory, and strbuf_addstr()
doesn't take ownership of its inputs. Therefore we have to make sure to
store and free prefix_filename()'s result.
As this leak is in cmd_bugreport(), we could just as well UNLEAK the
prefix - but there's no good reason not to just free it properly. This
leak was found while running t0091, see output below:
Direct leak of 24 byte(s) in 1 object(s) allocated from:
#0 0x49ab79 in realloc /home/abuild/rpmbuild/BUILD/llvm-11.0.0.src/build/../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3
#1 0x9acc66 in xrealloc wrapper.c:126:8
#2 0x93baed in strbuf_grow strbuf.c:98:2
#3 0x93c6ea in strbuf_add strbuf.c:295:2
#4 0x69f162 in strbuf_addstr ./strbuf.h:304:2
#5 0x69f083 in prefix_filename abspath.c:277:2
#6 0x4fb275 in cmd_bugreport builtin/bugreport.c:146:9
#7 0x4cd91d in run_builtin git.c:467:11
#8 0x4cb5f3 in handle_builtin git.c:719:3
#9 0x4ccf47 in run_argv git.c:808:4
#10 0x4caf49 in cmd_main git.c:939:19
#11 0x69df9e in main common-main.c:52:11
#12 0x7f523a987349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Signed-off-by: Andrzej Hunt <ajrhunt@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
common_prefix() returns a new string, which we store in max_prefix -
this string needs to be freed to avoid a leak. This leak is happening
in cmd_ls_files, hence is of no real consequence - an UNLEAK would be
just as good, but we might as well free the string properly.
Leak found while running t0002, see output below:
Direct leak of 8 byte(s) in 1 object(s) allocated from:
#0 0x49a85d in malloc /home/abuild/rpmbuild/BUILD/llvm-11.0.0.src/build/../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:145:3
#1 0x9ab1b4 in do_xmalloc wrapper.c:41:8
#2 0x9ab248 in do_xmallocz wrapper.c:75:8
#3 0x9ab22a in xmallocz wrapper.c:83:9
#4 0x9ab2d7 in xmemdupz wrapper.c:99:16
#5 0x78d6a4 in common_prefix dir.c:191:15
#6 0x5aca48 in cmd_ls_files builtin/ls-files.c:669:16
#7 0x4cd92d in run_builtin git.c:453:11
#8 0x4cb5fa in handle_builtin git.c:704:3
#9 0x4ccf57 in run_argv git.c:771:4
#10 0x4caf49 in cmd_main git.c:902:19
#11 0x69ce2e in main common-main.c:52:11
#12 0x7f64d4d94349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Signed-off-by: Andrzej Hunt <ajrhunt@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We use struct object_id for the names of objects. It isn't intended to
be used for other hash values that don't name objects such as the pack
hash.
Because struct object_id will soon need to have its algorithm member
set, using it in this code path would mean that we didn't set that
member, only the hash member, which would result in a crash. For both
of these reasons, switch to using an unsigned char array of size
GIT_MAX_RAWSZ.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In most cases, when we load the hash of an object into a struct
object_id, we load it using one of the oid* or *_oid_hex functions.
However, for git show-index, we read it in directly using fread. As a
consequence, set the algorithm correctly so the objects can be used
correctly both now and in the future.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Up until recently, object IDs did not have an algorithm member, only a
hash. Consequently, it was possible to share one null (all-zeros)
object ID among all hash algorithms. Now that we're going to be
handling objects from multiple hash algorithms, it's important to make
sure that all object IDs have a correct algorithm field.
Introduce a per-algorithm null OID, and add it to struct hash_algo.
Introduce a wrapper function as well, and use it everywhere we used to
use the null_oid constant.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we need our instances of struct object_id to be zero padded, we
can no longer cast unsigned char buffers to be pointers to struct
object_id. This file reads data out of the pack objects and then
inserts it directly into a linked list item which is a pointer to struct
object_id. Instead, let's have the linked list item hold its own struct
object_id and copy the data into it.
In addition, since these are not really pointers to struct object_id,
stop passing them around as such, and call them what they really are:
pointers to unsigned char.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we're hashing a value which is going to be an object ID, we want to
zero-pad that value if necessary. To do so, use the final_oid_fn
instead of the final_fn anytime we're going to create an object ID to
ensure we perform this operation.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the future, we'll want oidread to automatically set the hash
algorithm member for an object ID we read into it, so ensure we use
oidread instead of hashcpy everywhere we're copying a hash value into a
struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git pack-objects" makes a literal copy of a part of existing
packfile using the reachability bitmaps, its update to the progress
meter was broken.
* jk/pack-objects-bitmap-progress-fix:
pack-objects: update "nr_seen" progress based on pack-reused count
When we use `git for-each-ref`, every ref will allocate
its own output strbuf and error strbuf. But we can reuse
the final strbuf for each step ref's output. The error
buffer will also be reused, despite the fact that the git
will exit when `format_ref_array_item()` return a non-zero
value and output the contents of the error buffer.
The performance for `git for-each-ref` on the Git repository
itself with performance testing tool `hyperfine` changes from
23.7 ms ± 0.9 ms to 22.2 ms ± 1.0 ms. Optimization is relatively
minor.
At the same time, we apply this optimization to `git tag -l`
and `git branch -l`.
This approach is similar to the one used by 79ed0a5
(cat-file: use a single strbuf for all output, 2018-08-14)
to speed up the cat-file builtin.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Jeff King <peff@peff.net>
Helped-by: René Scharfe <l.s.r@web.de>
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Inlining the exported function `show_ref_array_item()`,
which is not providing the right level of abstraction,
simplifies the API and can unlock improvements at the
former call sites.
Helped-by: René Scharfe <l.s.r@web.de>
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's two callsites which assemble global config paths, once in the
config loading code and once in the git-config(1) builtin. We're about
to implement a way to override global config paths via an environment
variable which would require us to adjust both sites.
Unify both code paths into a single `git_global_config()` function which
returns both paths for `~/.gitconfig` and the XDG config file. This will
make the subsequent patch which introduces the new envvar easier to
implement.
No functional changes are expected from this patch.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `git_etc_gitconfig()` function retrieves the system-level path of
the configuration file. We're about to introduce a way to override it
via an environment variable, at which point the name of this function
would start to become misleading.
Rename the function to `git_system_config()` as a preparatory step.
While at it, the function is also refactored to pass memory ownership to
the caller. This is done to better match semantics of
`git_global_config()`, which is going to be introduced in the next
commit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When providing an object filter, it is currently impossible to also
filter provided items. E.g. when executing `git rev-list HEAD` , the
commit this reference points to will be treated as user-provided and is
thus excluded from the filtering mechanism. This makes it harder than
necessary to properly use the new `--filter=object:type` filter given
that even if the user wants to only see blobs, he'll still see commits
of provided references.
Improve this by introducing a new `--filter-provided-objects` option
to the git-rev-parse(1) command. If given, then all user-provided
references will be subject to filtering.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use multiple worker processes to distribute the queued entries and call
write_pc_item() in parallel for them. The items are distributed
uniformly in contiguous chunks. This minimizes the chances of two
workers writing to the same directory simultaneously, which could affect
performance due to lock contention in the kernel. Work stealing (or any
other format of re-distribution) is not implemented yet.
The protocol between the main process and the workers is quite simple.
They exchange binary messages packed in pkt-line format, and use
PKT-FLUSH to mark the end of input (from both sides). The main process
starts the communication by sending N pkt-lines, each corresponding to
an item that needs to be written. These packets contain all the
necessary information to load, smudge, and write the blob associated
with each item. Then it waits for the worker to send back N pkt-lines
containing the results for each item. The resulting packet must contain:
the identification number of the item that it refers to, the status of
the operation, and the lstat() data gathered after writing the file (iff
the operation was successful).
For now, checkout always uses a hardcoded value of 2 workers, only to
demonstrate that the parallel checkout framework correctly divides and
writes the queued entries. The next patch will add user configurations
and define a more reasonable default, based on tests with the said
settings.
Co-authored-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Co-authored-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
New log.diffMerges configuration variable sets the format that
--diff-merges=on will be using. The default is "separate".
t4013: add the following tests for log.diffMerges config:
* Test that wrong values are denied.
* Test that the value of log.diffMerges properly affects both
--diff-merges=on and -m.
t9902: fix completion tests for log.d* to match log.diffMerges.
Added documentation for log.diffMerges.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Plug the ort merge backend throughout the rest of the system, and
start testing it as a replacement for the recursive backend.
* en/ort-readiness:
Add testing with merge-ort merge strategy
t6423: mark remaining expected failure under merge-ort as such
Revert "merge-ort: ignore the directory rename split conflict for now"
merge-recursive: add a bunch of FIXME comments documenting known bugs
merge-ort: write $GIT_DIR/AUTO_MERGE whenever we hit a conflict
t: mark several submodule merging tests as fixed under merge-ort
merge-ort: implement CE_SKIP_WORKTREE handling with conflicted entries
t6428: new test for SKIP_WORKTREE handling and conflicts
merge-ort: support subtree shifting
merge-ort: let renormalization change modify/delete into clean delete
merge-ort: have ll_merge() use a special attr_index for renormalization
merge-ort: add a special minimal index just for renormalization
merge-ort: use STABLE_QSORT instead of QSORT where required
If a remote has the skipFetchAll setting enabled, then that remote is
not intended for frequent fetching. It makes sense to not fetch that
data during the 'prefetch' maintenance task. Skip that remote in the
iteration without error. The skip_default_update member is initialized
in remote.c:handle_config() as part of initializing the 'struct remote'.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'prefetch' maintenance task previously forced the following refspec
for each remote:
+refs/heads/*:refs/prefetch/<remote>/*
If a user has specified a more strict refspec for the remote, then this
prefetch task downloads more objects than necessary.
The previous change introduced the '--prefetch' option to 'git fetch'
which manipulates the remote's refspec to place all resulting refs into
refs/prefetch/, with further partitioning based on the destinations of
those refspecs.
Update the documentation to be more generic about the destination refs.
Do not mention custom refspecs explicitly, as that does not need to be
highlighted in this documentation. The important part of placing refs in
refs/prefetch/ remains.
Reported-by: Tom Saeger <tom.saeger@oracle.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --prefetch option will be used by the 'prefetch' maintenance task
instead of sending refspecs explicitly across the command-line. The
intention is to modify the refspec to place all results in
refs/prefetch/ instead of anywhere else.
Create helper method filter_prefetch_refspec() to modify a given refspec
to fit the rules expected of the prefetch task:
* Negative refspecs are preserved.
* Refspecs without a destination are removed.
* Refspecs whose source starts with "refs/tags/" are removed.
* Other refspecs are placed within "refs/prefetch/".
Finally, we add the 'force' option to ensure that prefetch refs are
replaced as necessary.
There are some interesting cases that are worth testing.
An earlier version of this change dropped the "i--" from the loop that
deletes a refspec item and shifts the remaining entries down. This
allowed some refspecs to not be modified. The subtle part about the
first --prefetch test is that the "refs/tags/*" refspec appears directly
before the "refs/heads/bogus/*" refspec. Without that "i--", this
ordering would remove the "refs/tags/*" refspec and leave the last one
unmodified, placing the result in "refs/heads/*".
It is possible to have an empty refspec. This is typically the case for
remotes other than the origin, where users want to fetch a specific tag
or branch. To correctly test this case, we need to further remove the
upstream remote for the local branch. Thus, we are testing a refspec
that will be deleted, leaving nothing to fetch.
Helped-by: Tom Saeger <tom.saeger@oracle.com>
Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before iterating over all cache entries, ensure that a sparse index is
expanded to a full index to avoid unexpected behavior.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before iterating over all cache entries, ensure that a sparse index is
expanded to a full index to avoid unexpected behavior.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before iterating over all cache entries, ensure that a sparse index is
expanded to a full index to avoid unexpected behavior.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before iterating over all cache entries, ensure that a sparse index is
expanded to a full one to avoid unexpected behavior.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before iterating over all cache entries, ensure that a sparse index is
expanded to a full one to avoid missing files.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before iterating over all cache entries, ensure that a sparse index is
expanded to a full one so we do not miss blobs to scan. Later, this can
integrate more carefully with sparse indexes with proper testing.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When verifying all blobs reachable from the index, ensure that a sparse
index has been expanded to a full one to avoid missing some blobs.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before iterating over all cache entries, ensure that a sparse index has
been expanded to a full one to avoid unexpected behavior.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These two loops iterate over all cache entries, so ensure that a sparse
index is expanded to a full index before we do so.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before iterating over all cache entries in the checkout builtin, ensure
that we have a full index to avoid any unexpected behavior.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before we iterate over all cache entries, ensure that the index is not
sparse. This loop in checkout_all() might be safe to iterate over a
sparse index, but let's put this protection here until it can be
carefully tested.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before iterating over all cache entries, ensure that a sparse index is
expanded to a full index to avoid unexpected behavior.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Several methods specify that they take a 'struct index_state' pointer
with the 'const' qualifier because they intend to only query the data,
not change it. However, we will be introducing a step very low in the
method stack that might modify a sparse-index to become a full index in
the case that our queries venture inside a sparse-directory entry.
This change only removes the 'const' qualifiers that are necessary for
the following change which will actually modify the implementation of
index_name_stage_pos().
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A configuration variable has been added to force tips of certain
refs to be given a reachability bitmap.
* tb/pack-preferred-tips-to-give-bitmap:
builtin/pack-objects.c: respect 'pack.preferBitmapTips'
t/helper/test-bitmap.c: initial commit
pack-bitmap: add 'test_bitmap_commits()' helper
All of the other lookup_foo() functions take a repository argument, but
lookup_unknown_object() was never converted, and it uses the_repository
internally. Let's fix that.
We could leave a wrapper that uses the_repository, but there aren't that
many calls, so we'll just convert them all. I looked briefly at each
site to see if we had a repository struct (besides the_repository) we
could pass, but none of them do (so this conversion to pass
the_repository is a pure noop in each case, though it does take us one
step closer to eventually getting rid of the_repository).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When serving a clone or fetch with bitmaps, after deciding which objects
need to be sent our "pack reuse" mechanism kicks in: we try to send
more-or-less verbatim a bunch of objects from the beginning of the
bitmapped packfile without even adding them to the to_pack.objects
array.
After deciding which objects will be in the "reused" portion, we update
nr_result to account for those, and then trigger display_progress() to
show the user (who is undoubtedly dazzled that we managed to enumerate
so many objects so quickly).
But then something confusing happens: the "Enumerating objects" progress
meter jumps _backwards_, counting up from zero the number of objects we
actually add into to_pack.objects.
This worked correctly once upon a time, but was broken in 5af050437a
(pack-objects: show some progress when counting kept objects,
2018-04-15), when the latter half of that progress meter switched to
using a separate nr_seen counter, rather than nr_result. Nobody noticed
for two reasons:
- prior to the pack-reuse fixes from a14aebeac3 (Merge branch
'jk/packfile-reuse-cleanup', 2020-02-14), the reuse code almost
never kicked in anyway
- the output looks _kind of_ correct. The "backwards" moment is hard
to catch, because we overwrite the old progress number with the new
one, and the larger number is displayed only for a second. So unless
you look at that exact second, you just see the much smaller value,
counting up to the number of non-reused objects (though of course if
you catch it in stderr, or look at GIT_TRACE_PACKET from a server
with bitmaps, you can see both values).
This smaller output isn't wrong per se, but isn't counting what we ever
intended to. We should give the user the whole number of objects we
considered (which, as per 5af050437a's original purpose, is already
_not_ a count of what goes into to_pack.objects). The follow-on
"Counting objects" meter shows the actual number of objects we feed into
that array.
We can easily fix this by bumping (and showing) nr_seen for the
pack-reused objects. When the included test is run without this patch,
the second pack-objects invocation produces "Enumerating objects: 1" to
show the one loose object, even though the resulting pack has hundreds
of objects in it. With it, we jump to "Enumerating objects: 674" after
deciding on reuse, and then "675" when we add in the loose object.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git add` refrains from adding or updating index entries that are
outside the current sparse checkout, but `git rm` doesn't follow the
same restriction. This is somewhat counter-intuitive and inconsistent.
So make `rm` honor the sparsity rules and advise on how to remove
SKIP_WORKTREE entries just like `add` does. Also add some tests for the
new behavior.
Suggested-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git add` already refrains from updating SKIP_WORKTREE entries, but it
silently exits with zero code when it is asked to do so. Instead, let's
warn the user and display a hint on how to update these entries.
Note that we only warn the user whey they give a pathspec item that
matches no eligible path for updating, but it does match one or more
SKIP_WORKTREE entries. A warning was chosen over erroring out right away
to reproduce the same behavior `add` already exhibits with ignored
files. This also allow users to continue their workflow without having
to invoke `add` again with only the eligible paths (as those will have
already been added).
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new enum parameter to `add_pathspec_matches_against_index()` and
`find_pathspecs_matching_against_index()`, allowing callers to specify
whether these function should attempt to match SKIP_WORKTREE entries or
not. This will be used in a future patch to make `git add` display a
warning when it is asked to update SKIP_WORKTREE entries.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `git add --refresh <pathspec>` doesn't find any matches for the
given pathspec, it prints an error message using the `match` field of
the `struct pathspec_item`. However, this field doesn't contain the
magic part of the pathspec. Instead, let's use the `original` field.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git cherry-pick/revert" with or without "--[no-]edit" did not spawn
the editor as expected (e.g. "revert --no-edit" after a conflict
still asked to edit the message), which has been corrected.
* en/sequencer-edit-upon-conflict-fix:
sequencer: fix edit handling for cherry-pick and revert messages
"git clone --reject-shallow" option fails the clone as soon as we
notice that we are cloning from a shallow repository.
* ll/clone-reject-shallow:
builtin/clone.c: add --reject-shallow option
An on-disk reverse-index to map the in-pack location of an object
back to its object name across multiple packfiles is introduced.
* tb/reverse-midx:
midx.c: improve cache locality in midx_pack_order_cmp()
pack-revindex: write multi-pack reverse indexes
pack-write.c: extract 'write_rev_file_order'
pack-revindex: read multi-pack reverse indexes
Documentation/technical: describe multi-pack reverse indexes
midx: make some functions non-static
midx: keep track of the checksum
midx: don't free midx_name early
midx: allow marking a pack as preferred
t/helper/test-read-midx.c: add '--show-objects'
builtin/multi-pack-index.c: display usage on unrecognized command
builtin/multi-pack-index.c: don't enter bogus cmd_mode
builtin/multi-pack-index.c: split sub-commands
builtin/multi-pack-index.c: define common usage with a macro
builtin/multi-pack-index.c: don't handle 'progress' separately
builtin/multi-pack-index.c: inline 'flags' with options
Fsck API clean-up.
* ab/fsck-api-cleanup:
fetch-pack: use new fsck API to printing dangling submodules
fetch-pack: use file-scope static struct for fsck_options
fetch-pack: don't needlessly copy fsck_options
fsck.c: move gitmodules_{found,done} into fsck_options
fsck.c: add an fsck_set_msg_type() API that takes enums
fsck.c: pass along the fsck_msg_id in the fsck_error callback
fsck.[ch]: move FOREACH_FSCK_MSG_ID & fsck_msg_id from *.c to *.h
fsck.c: give "FOREACH_MSG_ID" a more specific name
fsck.c: undefine temporary STR macro after use
fsck.c: call parse_msg_type() early in fsck_set_msg_type()
fsck.h: re-order and re-assign "enum fsck_msg_type"
fsck.h: move FSCK_{FATAL,INFO,ERROR,WARN,IGNORE} into an enum
fsck.c: refactor fsck_msg_type() to limit scope of "int msg_type"
fsck.c: rename remaining fsck_msg_id "id" to "msg_id"
fsck.c: remove (mostly) redundant append_msg_id() function
fsck.c: rename variables in fsck_set_msg_type() for less confusion
fsck.h: use "enum object_type" instead of "int"
fsck.h: use designed initializers for FSCK_OPTIONS_{DEFAULT,STRICT}
fsck.c: refactor and rename common config callback
A few option description strings started with capital letters,
which were corrected.
* cc/downcase-opt-help:
column, range-diff: downcase option description
"git commit" learned "--trailer <key>[=<value>]" option; together
with the interpret-trailers command, this will make it easier to
support custom trailers.
* zh/commit-trailer:
commit: add --trailer option
Plug or annotate remaining leaks that trigger while running the
very basic set of tests.
* ah/plugleaks:
transport: also free remote_refs in transport_disconnect()
parse-options: don't leak alias help messages
parse-options: convert bitfield values to use binary shift
init-db: silence template_dir leak when converting to absolute path
init: remove git_init_db_config() while fixing leaks
worktree: fix leak in dwim_branch()
clone: free or UNLEAK further pointers when finished
reset: free instead of leaking unneeded ref
symbolic-ref: don't leak shortened refname in check_symref()
The previous logic filled a string list with the names of each remote,
but instead we could simply run the appropriate 'git fetch' data
directly in the remote iterator. Do this for reduced code size, but also
because it sets up an upcoming change to use the remote's refspec. This
data is accessible from the 'struct remote' data that is now accessible
in fetch_remote().
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch -v<n>" learned to allow a reroll count that is
not an integer.
* zh/format-patch-fractional-reroll-count:
format-patch: allow a non-integral version numbers
A simple IPC interface gets introduced to build services like
fsmonitor on top.
* jh/simple-ipc:
t0052: add simple-ipc tests and t/helper/test-simple-ipc tool
simple-ipc: add Unix domain socket implementation
unix-stream-server: create unix domain socket under lock
unix-socket: disallow chdir() when creating unix domain sockets
unix-socket: add backlog size option to unix_stream_listen()
unix-socket: eliminate static unix_stream_socket() helper function
simple-ipc: add win32 implementation
simple-ipc: design documentation for new IPC mechanism
pkt-line: add options argument to read_packetized_to_strbuf()
pkt-line: add PACKET_READ_GENTLE_ON_READ_ERROR option
pkt-line: do not issue flush packets in write_packetized_*()
pkt-line: eliminate the need for static buffer in packet_write_gently()
Preparatory API changes for parallel checkout.
* mt/parallel-checkout-part-1:
entry: add checkout_entry_ca() taking preloaded conv_attrs
entry: move conv_attrs lookup up to checkout_entry()
entry: extract update_ce_after_write() from write_entry()
entry: make fstat_output() and read_blob_entry() public
entry: extract a header file for entry.c functions
convert: add classification for conv_attrs struct
convert: add get_stream_filter_ca() variant
convert: add [async_]convert_to_working_tree_ca() variants
convert: make convert_attrs() and convert structs public
When multiple packs in the multi-pack index contain the same object, the
MIDX machinery must make a choice about which pack it associates with
that object. Prior to this patch, the lowest-ordered[1] pack was always
selected.
Pack selection for duplicate objects is relatively unimportant today,
but it will become important for multi-pack bitmaps. This is because we
can only invoke the pack-reuse mechanism when all of the bits for reused
objects come from the reuse pack (in order to ensure that all reused
deltas can find their base objects in the same pack).
To encourage the pack selection process to prefer one pack over another
(the pack to be preferred is the one a caller would like to later use as
a reuse pack), introduce the concept of a "preferred pack". When
provided, the MIDX code will always prefer an object found in a
preferred pack over any other.
No format changes are required to store the preferred pack, since it
will be able to be inferred with a corresponding MIDX bitmap, by looking
up the pack associated with the object in the first bit position (this
ordering is described in detail in a subsequent commit).
[1]: the ordering is specified by MIDX internals; for our purposes we
can consider the "lowest ordered" pack to be "the one with the
most-recent mtime.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some scenarios, users may want more history than the repository
offered for cloning, which happens to be a shallow repository, can
give them. But because users don't know it is a shallow repository
until they download it to local, we may want to refuse to clone
this kind of repository, without creating any unnecessary files.
The '--depth=x' option cannot be used as a solution; the source may
be deep enough to give us 'x' commits when cloned, but the user may
later need to deepen the history to arbitrary depth.
Teach '--reject-shallow' option to "git clone" to abort as soon as
we find out that we are cloning from a shallow repository.
Signed-off-by: Li Linchao <lilinchao@oschina.cn>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When writing a new pack with a bitmap, it is sometimes convenient to
indicate some reference prefixes which should receive priority when
selecting which commits to receive bitmaps.
A truly motivated caller could accomplish this by setting
'pack.islandCore', (since all commits in the core island are similarly
marked as preferred) but this requires callers to opt into using delta
islands, which they may or may not want to do.
Introduce a new multi-valued configuration, 'pack.preferBitmapTips' to
allow callers to specify a list of reference prefixes. All references
which have a prefix contained in 'pack.preferBitmapTips' will mark their
tips as "preferred" in the same way as commits are marked as preferred
for selection by 'pack.islandCore'.
The choice of the verb "prefer" is intentional: marking the NEEDS_BITMAP
flag on an object does *not* guarantee that that object will receive a
bitmap. It merely guarantees that that commit will receive a bitmap over
any *other* commit in the same window by bitmap_writer_select_commits().
The test this patch adds reflects this quirk, too. It only tests that
a commit (which didn't receive bitmaps by default) is selected for
bitmaps after changing the value of 'pack.preferBitmapTips' to include
it. Other commits may lose their bitmaps as a byproduct of how the
selection process works (bitmap_writer_select_commits() ignores the
remainder of a window after seeing a commit with the NEEDS_BITMAP flag).
This configuration will aide in selecting important references for
multi-pack bitmaps, since they do not respect the same pack.islandCore
configuration. (They could, but doing so may be confusing, since it is
packs--not bitmaps--which are influenced by the delta-islands
configuration).
In a fork network repository (one which lists all forks of a given
repository as remotes), for example, it is useful to set
pack.preferBitmapTips to 'refs/remotes/<root>/heads' and
'refs/remotes/<root>/tags', where '<root>' is an opaque identifier
referring to the repository which is at the base of the fork chain.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
save_opts() should save any non-default values. It was intended to do
this, but since most options in struct replay_opts default to 0, it only
saved non-zero values. Unfortunately, this does not always work for
options.edit. Roughly speaking, options.edit had a default value of 0
for cherry-pick but a default value of 1 for revert. Make save_opts()
record a value whenever it differs from the default.
options.edit was also overly simplistic; we had more than two cases.
The behavior that previously existed was as follows:
Non-conflict commits Right after Conflict
revert Edit iff isatty(0) Edit (ignore isatty(0))
cherry-pick No edit See above
Specify --edit Edit (ignore isatty(0)) See above
Specify --no-edit (*) See above
(*) Before stopping for conflicts, No edit is the behavior. After
stopping for conflicts, the --no-edit flag is not saved so see
the first two rows.
However, the expected behavior is:
Non-conflict commits Right after Conflict
revert Edit iff isatty(0) Edit iff isatty(0)
cherry-pick No edit Edit iff isatty(0)
Specify --edit Edit (ignore isatty(0)) Edit (ignore isatty(0))
Specify --no-edit No edit No edit
In order to get the expected behavior, we need to change options.edit
to a tri-state: unspecified, false, or true. When specified, we follow
what it says. When unspecified, we need to check whether the current
commit being created is resolving a conflict as well as consulting
options.action and isatty(0). While at it, add a should_edit() utility
function that compresses options.edit down to a boolean based on the
additional information for the non-conflict case.
continue_single_pick() is the function responsible for resuming after
conflict cases, regardless of whether there is one commit being picked
or many. Make this function stop assuming edit behavior in all cases,
so that it can correctly handle !isatty(0) and specific requests to not
edit the commit message.
Reported-by: Renato Botelho <garga@freebsd.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the final hint that we used to have a scripted "git rebase".
* ab/remove-rebase-usebuiltin:
rebase: remove transitory rebase.useBuiltin setting & env
Code simplification by removing support for a caller that is long gone.
* ab/read-tree:
tree.h API: simplify read_tree_recursive() signature
tree.h API: expose read_tree_1() as read_tree_at()
archive: stop passing "stage" through read_tree_recursive()
ls-files: refactor away read_tree()
ls-files: don't needlessly pass around stage variable
tree.c API: move read_tree() into builtin/ls-files.c
ls-files tests: add meaningful --with-tree tests
show tests: add test for "git show <tree>"
We use 'git sparse-checkout init --cone --sparse-index' to toggle the
sparse-index feature. It makes sense to also disable it when running
'git sparse-checkout disable'. This is particularly important because it
removes the extensions.sparseIndex config option, allowing other tools
to use this Git repository again.
This does mean that 'git sparse-checkout init' will not re-enable the
sparse-index feature, even if it was previously enabled.
While testing this feature, I noticed that the sparse-index was not
being written on the first run, but by a second. This was caught by the
call to 'test-tool read-cache --table'. This requires adjusting some
assignments to core_apply_sparse_checkout and pl.use_cone_patterns in
the sparse_checkout_init() logic.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sparse index extension is used to signal that index writes should be
in sparse mode. This was only updated using GIT_TEST_SPARSE_INDEX=1.
Add a '--[no-]sparse-index' option to 'git sparse-checkout init' that
specifies if the sparse index should be used. It also updates the index
to use the correct format, either way. Add a warning in the
documentation that the use of a repository extension might reduce
compatibility with third-party tools. 'git sparse-checkout init' already
sets extension.worktreeConfig, which places most sparse-checkout users
outside of the scope of most third-party tools.
Update t1092-sparse-checkout-compatibility.sh to use this CLI instead of
GIT_TEST_SPARSE_INDEX=1.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we modify the sparse-checkout definition, we perform index operations
on a pattern_list that only exists in-memory. This allows easy backing
out in case the index update fails.
However, if the index write itself cares about the sparse-checkout
pattern set, we need access to that in-memory copy. Place a pointer to
a 'struct pattern_list' in the index so we can access this on-demand.
This will be used in the next change which uses the sparse-checkout
definition to filter out directories that are outside the sparse cone.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When given a sub-command that it doesn't understand, 'git
multi-pack-index' dies with the following message:
$ git multi-pack-index bogus
fatal: unrecognized subcommand: bogus
Instead of 'die()'-ing, we can display the usage text, which is much
more helpful:
$ git.compile multi-pack-index bogus
error: unrecognized subcommand: bogus
usage: git multi-pack-index [<options>] write
or: git multi-pack-index [<options>] verify
or: git multi-pack-index [<options>] expire
or: git multi-pack-index [<options>] repack [--batch-size=<size>]
--object-dir <file> object directory containing set of packfile and pack-index pairs
--progress force progress reporting
While we're at it, clean up some duplication between the "no sub-command"
and "unrecognized sub-command" conditionals.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even before the recent refactoring, 'git multi-pack-index' calls
'trace2_cmd_mode()' before verifying that the sub-command is recognized.
Push this call down into the individual sub-commands so that we don't
enter a bogus command mode.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Handle sub-commands of the 'git multi-pack-index' builtin (e.g.,
"write", "repack", etc.) separately from one another. This allows
sub-commands with unique options, without forcing cmd_multi_pack_index()
to reject invalid combinations itself.
This comes at the cost of some duplication and boilerplate. Luckily, the
duplication is reduced to a minimum, since common options are shared
among sub-commands due to a suggestion by Ævar. (Sub-commands do have to
retain the common options, too, since this builtin accepts common
options on either side of the sub-command).
Roughly speaking, cmd_multi_pack_index() parses options (including
common ones), and stops at the first non-option, which is the
sub-command. It then dispatches to the appropriate sub-command, which
parses the remaining options (also including common options).
Unknown options are kept by the sub-commands in order to detect their
presence (and complain that too many arguments were given).
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Factor out the usage message into pieces corresponding to each mode.
This avoids options specific to one sub-command from being shared with
another in the usage.
A subsequent commit will use these #define macros to have usage
variables for each sub-command without duplicating their contents.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that there is a shared 'flags' member in the options structure,
there is no need to keep track of whether to force progress or not,
since ultimately the decision of whether or not to show a progress meter
is controlled by a bit in the flags member.
Manipulate that bit directly, and drop the now-unnecessary 'progress'
field while we're at it.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Subcommands of the 'git multi-pack-index' command (e.g., 'write',
'verify', etc.) will want to optionally change a set of shared flags
that are eventually passed to the MIDX libraries.
Right now, options and flags are handled separately. That's fine, since
the options structure is never passed around. But a future patch will
make it so that common options shared by all sub-commands are defined in
a common location. That means that "flags" would have to become a global
variable.
Group it with the options structure so that we reduce the number of
global variables we have overall.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is customary not to begin the help text for each option given to
the parse-options API with a capital letter. Various (sub)commands'
option arrays don't follow the guideline provided by the parse_options
Documentation regarding the descriptions.
Downcase the first word of some option descriptions for "column"
and "range-diff".
Signed-off-by: Chinmoy Chakraborty <chinmoy12c@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor the check added in 5476e1efde (fetch-pack: print and use
dangling .gitmodules, 2021-02-22) to make use of us now passing the
"msg_id" to the user defined "error_func". We can now compare against
the FSCK_MSG_GITMODULES_MISSING instead of parsing the generated
message.
Let's also replace register_found_gitmodules() with directly
manipulating the "gitmodules_found" member. A recent commit moved it
into "fsck_options" so we could do this here.
I'm sticking this callback in fsck.c. Perhaps in the future we'd like
to accumulate such callbacks into another file (maybe fsck-cb.c,
similar to parse-options-cb.c?), but while we've got just the one
let's just put it into fsck.c.
A better alternative in this case would be some library some more
obvious library shared by fetch-pack.c ad builtin/index-pack.c, but
there isn't such a thing.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the behavior of the .gitmodules validation added in
5476e1efde (fetch-pack: print and use dangling .gitmodules,
2021-02-22) so we're using one "fsck_options".
I found that code confusing to read. One might think that not setting
up the error_func earlier means that we're relying on the "error_func"
not being set in some code in between the two hunks being modified
here.
But we're not, all we're doing in the rest of "cmd_index_pack()" is
further setup by calling fsck_set_msg_types(), and assigning to
do_fsck_object.
So there was no reason in 5476e1efde to make a shallow copy of the
fsck_options struct before setting error_func. Let's just do this
setup at the top of the function, along with the "walk" assignment.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change code I added in acf9de4c94 (mktag: use fsck instead of custom
verify_tag(), 2021-01-05) to make use of a new API function that takes
the fsck_msg_{id,type} types, instead of arbitrary strings that
we'll (hopefully) parse into those types.
At the time that the fsck_set_msg_type() API was introduced in
0282f4dced (fsck: offer a function to demote fsck errors to warnings,
2015-06-22) it was only intended to be used to parse user-supplied
data.
For things that are purely internal to the C code it makes sense to
have the compiler check these arguments, and to skip the sanity
checking of the data in fsck_set_msg_type() which is redundant to
checks we get from the compiler.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the fsck_error callback to also pass along the
fsck_msg_id. Before this change the only way to get the message id was
to parse it back out of the "message".
Let's pass it down explicitly for the benefit of callers that might
want to use it, as discussed in [1].
Passing the msg_type is now redundant, as you can always get it back
from the msg_id, but I'm not changing that convention. It's really
common to need the msg_type, and the report() function itself (which
calls "fsck_error") needs to call fsck_msg_type() to discover
it. Let's not needlessly re-do that work in the user callback.
1. https://lore.kernel.org/git/87blcja2ha.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the FSCK_{FATAL,INFO,ERROR,WARN,IGNORE} defines into a new
fsck_msg_type enum.
These defines were originally introduced in:
- ba002f3b28 (builtin-fsck: move common object checking code to
fsck.c, 2008-02-25)
- f50c440730 (fsck: disallow demoting grave fsck errors to warnings,
2015-06-22)
- efaba7cc77 (fsck: optionally ignore specific fsck issues
completely, 2015-06-22)
- f27d05b170 (fsck: allow upgrading fsck warnings to errors,
2015-06-22)
The reason these were defined in two different places is because we
use FSCK_{IGNORE,INFO,FATAL} only in fsck.c, but FSCK_{ERROR,WARN} are
used by external callbacks.
Untangling that would take some more work, since we expose the new
"enum fsck_msg_type" to both. Similar to "enum object_type" it's not
worth structuring the API in such a way that only those who need
FSCK_{ERROR,WARN} pass around a different type.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the fsck_walk_func to use an "enum object_type" instead of an
"int" type. The types are compatible, and ever since this was added in
355885d531 (add generic, type aware object chain walker, 2008-02-25)
we've used entries from object_type (OBJ_BLOB etc.).
So this doesn't really change anything as far as the generated code is
concerned, it just gives the compiler more information and makes this
easier to read.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git commit --fixup=<commit>", which was to tweak the changes made
to the contents while keeping the original log message intact,
learned "--fixup=(amend|reword):<commit>", that can be used to
tweak both the message and the contents, and only the message,
respectively.
* cm/rebase-i-fixup-amend-reword:
doc/git-commit: add documentation for fixup=[amend|reword] options
t3437: use --fixup with options to create amend! commit
t7500: add tests for --fixup=[amend|reword] options
commit: add a reword suboption to --fixup
commit: add amend suboption to --fixup to create amend! commit
sequencer: export and rename subject_length()
"git repack" so far has been only capable of repacking everything
under the sun into a single pack (or split by size). A cleverer
strategy to reduce the cost of repacking a repository has been
introduced.
* tb/geometric-repack:
builtin/pack-objects.c: ignore missing links with --stdin-packs
builtin/repack.c: reword comment around pack-objects flags
builtin/repack.c: be more conservative with unsigned overflows
builtin/repack.c: assign pack split later
t7703: test --geometric repack with loose objects
builtin/repack.c: do not repack single packs with --geometric
builtin/repack.c: add '--geometric' option
packfile: add kept-pack cache for find_kept_pack_entry()
builtin/pack-objects.c: rewrite honor-pack-keep logic
p5303: measure time to repack with keep
p5303: add missing &&-chains
builtin/pack-objects.c: add '--stdin-packs' option
revision: learn '--no-kept-objects'
packfile: introduce 'find_kept_pack_entry()'
As record_reused_object(offset, offset - hashfile_total(out)) said,
reused_chunk.difference should be the offset of original packfile minus
the offset of the generated packfile. But the comment presented an opposite way.
Signed-off-by: Han Xin <hanxin.hx@alibaba-inc.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the rebase.useBuiltin setting and the now-obsolete
GIT_TEST_REBASE_USE_BUILTIN test flag.
This was left in place after my d03ebd411c (rebase: remove the
rebase.useBuiltin setting, 2019-03-18) to help anyone who'd used the
experimental flag and wanted to know that it was the default, or that
they should transition their test environment to use the builtin
rebase unconditionally.
It's been more than long enough for those users to get a headsup about
this. So remove all the scaffolding that was left inplace after
d03ebd411c. I'm also removing the documentation entry, if anyone
still has this left in their configuration they can do some source
archaeology to figure out what it used to do, which makes more sense
than exposing every git user reading the documentation to this legacy
configuration switch.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `-v<n>` option of `format-patch` can give nothing but an
integral iteration number to patches in a series. Some people,
however, prefer to mark a new iteration with only a small fixup
with a non integral iteration number (e.g. an "oops, that was
wrong" fix-up patch for v4 iteration may be labeled as "v4.1").
Allow `format-patch` to take such a non-integral iteration
number.
`<n>` can be any string, such as '3.1' or '4rev2'. In the case
where it is a non-integral value, the "Range-diff" and "Interdiff"
headers will not include the previous version.
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The declarations of entry.c's public functions and structures currently
reside in cache.h. Although not many, they contribute to the size of
cache.h and, when changed, cause the unnecessary recompilation of
modules that don't really use these functions. So let's move them to a
new entry.h header. While at it let's also move a comment related to
checkout_entry() from entry.c to entry.h as it's more useful to describe
the function there.
Original-patch-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Historically, Git has supported the 'Signed-off-by' commit trailer
using the '--signoff' and the '-s' option from the command line.
But users may need to provide other trailer information from the
command line such as "Helped-by", "Reported-by", "Mentored-by",
Now implement a new `--trailer <token>[(=|:)<value>]` option to pass
other trailers to `interpret-trailers` and insert them into commit
messages.
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git -c core.bare=false clone --bare ..." would have segfaulted,
which has been corrected.
* bc/clone-bare-with-conflicting-config:
builtin/init-db: handle bare clones when core.bare set to false
"git stash show" learned to optionally show untracked part of the
stash.
* dl/stash-show-untracked:
stash show: learn stash.showIncludeUntracked
stash show: teach --include-untracked and --only-untracked
Updates to memory allocation code around the use of pcre2 library.
* ab/grep-pcre2-allocfix:
grep/pcre2: move definitions of pcre2_{malloc,free}
grep/pcre2: move back to thread-only PCREv2 structures
grep/pcre2: actually make pcre2 use custom allocator
grep/pcre2: use pcre2_maketables_free() function
grep/pcre2: use compile-time PCREv2 version test
grep/pcre2: add GREP_PCRE2_DEBUG_MALLOC debug mode
grep/pcre2: prepare to add debugging to pcre2_malloc()
grep/pcre2: correct reference to grep_init() in comment
grep/pcre2: drop needless assignment to NULL
grep/pcre2: drop needless assignment + assert() on opt->pcre2
Update C code that sets a few configuration variables when a remote
is configured so that it spells configuration variable names in the
canonical camelCase.
* ab/remote-write-config-in-camel-case:
remote: write camel-cased *.pushRemote on rename
remote: add camel-cased *.tagOpt key, like clone
It does not make sense to make ".gitattributes", ".gitignore" and
".mailmap" symlinks, as they are supposed to be usable from the
object store (think: bare repositories where HEAD:.mailmap etc. are
used). When these files are symbolic links, we used to read the
contents of the files pointed by them by mistake, which has been
corrected.
* jk/open-dotgitx-with-nofollow:
mailmap: do not respect symlinks for in-tree .mailmap
exclude: do not respect symlinks for in-tree .gitignore
attr: do not respect symlinks for in-tree .gitattributes
exclude: add flags parameter to add_patterns()
attr: convert "macro_ok" into a flags field
add open_nofollow() helper
transport_get_remote_refs() can populate the transport struct's
remote_refs. transport_disconnect() is already responsible for most of
transport's cleanup - therefore we also take care of freeing remote_refs
there.
There are 2 locations where transport_disconnect() is called before
we're done using the returned remote_refs. This patch changes those
callsites to only call transport_disconnect() after the returned refs
are no longer being used - which is necessary to safely be able to
free remote_refs during transport_disconnect().
This commit fixes the following leak which was found while running
t0000, but is expected to also fix the same pattern of leak in all
locations that use transport_get_remote_refs():
Direct leak of 165 byte(s) in 1 object(s) allocated from:
#0 0x49a6b2 in calloc /home/abuild/rpmbuild/BUILD/llvm-11.0.0.src/build/../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:154:3
#1 0x9a72f2 in xcalloc /home/ahunt/oss-fuzz/git/wrapper.c:140:8
#2 0x8ce203 in alloc_ref_with_prefix /home/ahunt/oss-fuzz/git/remote.c:867:20
#3 0x8ce1a2 in alloc_ref /home/ahunt/oss-fuzz/git/remote.c:875:9
#4 0x72f63e in process_ref_v2 /home/ahunt/oss-fuzz/git/connect.c:426:8
#5 0x72f21a in get_remote_refs /home/ahunt/oss-fuzz/git/connect.c:525:8
#6 0x979ab7 in handshake /home/ahunt/oss-fuzz/git/transport.c:305:4
#7 0x97872d in get_refs_via_connect /home/ahunt/oss-fuzz/git/transport.c:339:9
#8 0x9774b5 in transport_get_remote_refs /home/ahunt/oss-fuzz/git/transport.c:1388:4
#9 0x51cf80 in cmd_clone /home/ahunt/oss-fuzz/git/builtin/clone.c:1271:9
#10 0x4cd60d in run_builtin /home/ahunt/oss-fuzz/git/git.c:453:11
#11 0x4cb2da in handle_builtin /home/ahunt/oss-fuzz/git/git.c:704:3
#12 0x4ccc37 in run_argv /home/ahunt/oss-fuzz/git/git.c:771:4
#13 0x4cac29 in cmd_main /home/ahunt/oss-fuzz/git/git.c:902:19
#14 0x69c45e in main /home/ahunt/oss-fuzz/git/common-main.c:52:11
#15 0x7f6a459d5349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Signed-off-by: Andrzej Hunt <ajrhunt@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simplify the signature of read_tree_recursive() to omit the "base",
"baselen" and "stage" arguments. No callers of it use these parameters
for anything anymore.
The last function to call read_tree_recursive() with a non-"" path was
read_tree_recursive() itself, but that was changed in
ffd31f661d (Reimplement read_tree_recursive() using
tree_entry_interesting(), 2011-03-25).
The last user of the "stage" parameter went away in the last commit,
and even that use was mere boilerplate.
So let's remove those and rename the read_tree_recursive() function to
just read_tree(). We had another read_tree() function that I've
refactored away in preceding commits, since all in-tree users read
trees recursively with a callback we can change the name to signify
that this is the norm.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor away the read_tree() function into its only user,
overlay_tree_on_index().
First, change read_one_entry_opt() to use the strbuf parameter
read_tree_recursive() passes down in place. This finishes up a partial
refactoring started in 6a0b0b6de9 (tree.c: update read_tree_recursive
callback to pass strbuf as base, 2014-11-30).
Moving the rest into overlay_tree_on_index() makes this index juggling
we're doing easier to read.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that read_tree() has been moved to ls-files.c we can get rid of
the stage != 1 case that'll never happen.
Let's not use read_tree_recursive() as a pass-through to pass "stage =
1" either. For now we'll pass an unused "stage = 0" for consistency
with other read_tree_recursive() callers, that argument will be
removed in a follow-up commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the read_tree() API was added around the same time as
read_tree_recursive() in 94537c78a8 (Move "read_tree()" to
"tree.c"[...], 2005-04-22) and b12ec373b8 ([PATCH] Teach read-tree
about commit objects, 2005-04-20) things have gradually migrated over
to the read_tree_recursive() version.
Now builtin/ls-files.c is the last user of this code, let's move all
the relevant code there. This allows for subsequent simplification of
it, and an eventual move to read_tree_recursive().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
