As in previous commits, harden the wincred credential helper against the
aforementioned protocol injection attack.
Unlike the approached used for osxkeychain and libsecret, where a
fixed-size buffer was replaced with `getline()`, we must take a
different approach here. There is no `getline()` equivalent in Windows,
and the function is not available to us with ordinary compiler settings.
Instead, allocate a larger (still fixed-size) buffer in which to process
each line. The value of 100 KiB is chosen to match the maximum-length
header that curl will allow, CURL_MAX_HTTP_HEADER.
To ensure that we are reading complete lines at a time, and that we
aren't susceptible to a similar injection attack (albeit with more
padding), ensure that each read terminates at a newline (i.e., that no
line is more than 100 KiB long).
Note that it isn't sufficient to turn the old loop into something like:
while (len && strchr("\r\n", buf[len - 1])) {
buf[--len] = 0;
ends_in_newline = 1;
}
because if an attacker sends something like:
[aaaaa.....]\r
host=example.com\r\n
the credential helper would fill its buffer after reading up through the
first '\r', call fgets() again, and then see "host=example.com\r\n" on
its line.
Note that the original code was written in a way that would trim an
arbitrary number of "\r" and "\n" from the end of the string. We should
get only a single "\n" (since the point of `fgets()` is to return the
buffer to us when it sees one), and likewise would not expect to see
more than one associated "\r". The new code trims a single "\r\n", which
matches the original intent.
[1]: https://curl.se/libcurl/c/CURLOPT_HEADERFUNCTION.html
Tested-by: Matthew John Cheetham <mjcheetham@outlook.com>
Helped-by: Matthew John Cheetham <mjcheetham@outlook.com>
Co-authored-by: Jeff King <peff@peff.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The libsecret credential helper reads the newline-delimited
protocol stream one line at a time by repeatedly calling fgets() into a
fixed-size buffer, and is thus affected by the vulnerability described
in the previous commit.
To mitigate this attack, avoid using a fixed-size buffer, and instead
rely on getline() to allocate a buffer as large as necessary to fit the
entire content of the line, preventing any protocol injection.
In most parts of Git we don't assume that every platform has getline().
But libsecret is primarily used on Linux, where we do already assume it
(using a knob in config.mak.uname). POSIX also added getline() in 2008,
so we'd expect other recent Unix-like operating systems to have it
(e.g., FreeBSD also does).
Note that the buffer was already allocated on the heap in this case, but
we'll swap `g_free()` for `free()`, since it will now be allocated by
the system `getline()`, rather than glib's `g_malloc()`.
Tested-by: Jeff King <peff@peff.net>
Co-authored-by: Jeff King <peff@peff.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The libsecret credential helper does not mark its build artifact as
ignored, so running "make" results in a dirty working tree.
Mark the "git-credential-libsecret" binary as ignored to avoid the above.
Co-authored-by: Jeff King <peff@peff.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
libgnome-keyring was deprecated in 2014 (in favor of libsecret), more
than nine years ago [1].
The credential helper implemented using libgnome-keyring has had a small
handful of commits since 2013, none of which implemented or changed any
functionality. The last commit to do substantial work in this area was
15f7221686 (contrib/git-credential-gnome-keyring.c: support really
ancient gnome-keyring, 2013-09-23), just shy of nine years ago.
This credential helper suffers from the same `fgets()`-related injection
attack (using the new "wwwauth[]" feature) as in the previous commit.
Instead of patching it, let's remove this helper as deprecated.
[1]: https://mail.gnome.org/archives/commits-list/2014-January/msg01585.html
Co-authored-by: Jeff King <peff@peff.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The macOS Keychain-based credential helper reads the newline-delimited
protocol stream one line at a time by repeatedly calling fgets() into a
fixed-size buffer, and is thus affected by the vulnerability described
in the previous commit.
To mitigate this attack, avoid using a fixed-size buffer, and instead
rely on getline() to allocate a buffer as large as necessary to fit the
entire content of the line, preventing any protocol injection.
We solved a similar problem in a5bb10fd5e (config: avoid fixed-sized
buffer when renaming/deleting a section, 2023-04-06) by switching to
strbuf_getline(). We can't do that here because the contrib helpers do
not link with the rest of Git, and so can't use a strbuf. But we can use
the system getline() directly, which works similarly.
In most parts of Git we don't assume that every platform has getline().
But this helper is run only on OS X, and that platform added support in
10.7 ("Lion") which was released in 2011.
Tested-by: Taylor Blau <me@ttaylorr.com>
Co-authored-by: Jeff King <peff@peff.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Like in all the other credential helpers, the osxkeychain helper
ignores unknown credential lines.
Add a comment (a la the other helpers) to make it clear and explicit
that this is the desired behaviour.
Signed-off-by: Matthew John Cheetham <mjcheetham@outlook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Contrary to the documentation on credential helpers, as well as the help
text for git-credential-netrc itself, this helper will `die` when
presented with an unknown property/attribute/token.
Correct the behaviour here by skipping and ignoring any tokens that are
unknown. This means all helpers in the tree are consistent and ignore
any unknown credential properties/attributes.
Signed-off-by: Matthew John Cheetham <mjcheetham@outlook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is the expectation that credential helpers be liberal in what they
accept and conservative in what they return, to allow for future growth
and evolution of the protocol/interaction.
All of the other helpers (store, cache, osxkeychain, libsecret,
gnome-keyring) except `netrc` currently ignore any credential lines
that are not recognised, whereas the Windows helper (wincred) instead
dies.
Fix the discrepancy and ignore unknown lines in the wincred helper.
Signed-off-by: Matthew John Cheetham <mjcheetham@outlook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extend SANITIZE=leak checking and declare more tests "currently leak-free".
* ab/leak-check:
CI: use "GIT_TEST_SANITIZE_LEAK_LOG=true" in linux-leaks
upload-pack: fix a memory leak in create_pack_file()
leak tests: mark passing SANITIZE=leak tests as leak-free
leak tests: don't skip some tests under SANITIZE=leak
test-lib: have the "check" mode for SANITIZE=leak consider leak logs
test-lib: add a GIT_TEST_PASSING_SANITIZE_LEAK=check mode
test-lib: simplify by removing test_external
tests: move copy/pasted PERL + Test::More checks to a lib-perl.sh
t/Makefile: don't remove test-results in "clean-except-prove-cache"
test-lib: add a SANITIZE=leak logging mode
t/README: reword the "GIT_TEST_PASSING_SANITIZE_LEAK" description
test-lib: add a --invert-exit-code switch
test-lib: fix GIT_EXIT_OK logic errors, use BAIL_OUT
test-lib: don't set GIT_EXIT_OK before calling test_atexit_handler
test-lib: use $1, not $@ in test_known_broken_{ok,failure}_
Remove the "test_external" function added in [1]. This arguably makes
the output of t9700-perl-git.sh and friends worse. But as we'll argue
below the trade-off is worth it, since "chaining" to another TAP
emitter in test-lib.sh is more trouble than it's worth.
The new output of t9700-perl-git.sh is now:
$ ./t9700-perl-git.sh
ok 1 - set up test repository
ok 2 - use t9700/test.pl to test Git.pm
# passed all 2 test(s)
1..2
Whereas before this change it would be:
$ ./t9700-perl-git.sh
ok 1 - set up test repository
# run 1: Perl API (perl /home/avar/g/git/t/t9700/test.pl)
ok 2 - use Git;
[... omitting tests 3..46 from t/t9700/test.pl ...]
ok 47 - unquote escape sequences
1..47
# test_external test Perl API was ok
# test_external_without_stderr test no stderr: Perl API was ok
At the time of its addition supporting "test_external" was easy, but
when test-lib.sh itself started to emit TAP in [2] we needed to make
everything surrounding the emission of the plan consider
"test_external". I added that support in [2] so that we could run:
prove ./t9700-perl-git.sh :: -v
But since then in [3] the door has been closed on combining
$HARNESS_ACTIVE and -v, we'll now just die:
$ prove ./t9700-perl-git.sh :: -v
Bailout called. Further testing stopped: verbose mode forbidden under TAP harness; try --verbose-log
FAILED--Further testing stopped: verbose mode forbidden under TAP harness; try --verbose-log
So the only use of this has been that *if* we had failure in one of
these tests we could e.g. in CI see which test failed based on the
test number. Now we'll need to look at the full verbose logs to get
that same information.
I think this trade-off is acceptable given the reduction in
complexity, and it brings these tests in line with other similar
tests, e.g. the reftable tests added in [4] will be condensed down to
just one test, which invokes the C helper:
$ ./t0032-reftable-unittest.sh
ok 1 - unittests
# passed all 1 test(s)
1..1
It would still be nice to have that ":: -v" form work again, it
never *really* worked, but even though we've had edge cases test
output screwing up the TAP it mostly worked between d998bd4ab6 and
[3], so we may have been overzealous in forbidding it outright.
I have local patches which I'm planning to submit sooner than later
that get us to that goal, and in a way that isn't buggy. In the
meantime getting rid of this special case makes hacking on this area
of test-lib.sh easier, as we'll do in subsequent commits.
The switch from "perl" to "$PERL_PATH" here is because "perl" is
defined as a shell function in the test suite, see a5bf824f3b (t:
prevent '-x' tracing from interfering with test helpers' stderr,
2018-02-25). On e.g. the OSX CI the "command perl"... will be part of
the emitted stderr.
1. fb32c41008 (t/test-lib.sh: add test_external and
test_external_without_stderr, 2008-06-19)
2. d998bd4ab6 (test-lib: Make the test_external_* functions
TAP-aware, 2010-06-24)
3. 614fe01521 (test-lib: bail out when "-v" used under
"prove", 2016-10-22)
4. ef8a6c6268 (reftable: utility functions, 2021-10-07)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the original "perl -MTest::More" prerequisite check was added in
[1] it's been copy/pasted in [2], [3] and [4]. As we'll be changing
these codepaths in a subsequent commit let's consolidate these.
While we're at it let's move these to a lazy prereq, and make them
conform to our usual coding style (e.g. "\nthen", not "; then").
1. e46f9c8161 (t9700: skip when Test::More is not available,
2008-06-29)
2. 5e9637c629 (i18n: add infrastructure for translating Git with
gettext, 2011-11-18)
3. 8d314d7afe (send-email: reduce dependencies impact on
parse_address_line, 2015-07-07)
4. f07eeed123 (git-credential-netrc: adapt to test framework for git,
2018-05-12)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update git-credential-osxkeychain.c to remove 'format string is not a string
literal (potentially insecure)' compiler warning by treating the string as
an argument.
Signed-off-by: Lessley Dennington <lessleydennington@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In C it isn't required to specify that all members of a struct are
zero'd out to 0, NULL or '\0', just providing a "{ 0 }" will
accomplish that.
Let's also change code that provided N zero'd fields to just
provide one, and change e.g. "{ NULL }" to "{ 0 }" for
consistency. I.e. even if the first member is a pointer let's use "0"
instead of "NULL". The point of using "0" consistently is to pick one,
and to not have the reader wonder why we're not using the same pattern
everywhere.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add missing __attribute__((format)) function attributes to various
"static" functions that take printf arguments.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, git-credential-netrc does not work outside of a git
repository. It fails with the following error:
fatal: Not a git repository: . at /usr/share/perl5/Git.pm line 214.
There is no real reason why need to be within a repository, though.
Credential helpers should be able to work just fine outside the
repository as well.
Call the non-self version of config() so that git-credential-netrc no
longer needs to be run within a repository.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The shebang path for the Perl interpreter in git-credential-netrc was
hardcoded. However, some users may have it located at a different
location and thus, would have had to manually edit the script.
Add a .perl prefix to the script to denote it as a template and ignore
the generated version. Augment the Makefile so that it generates
git-credential-netrc from git-credential-netrc.perl, just like other
Perl scripts.
The Makefile recipes were shamelessly stolen from
contrib/mw-to-git/Makefile.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we access IPv6-related functions, we load the corresponding system
library using the `LoadLibrary()` function, which is not the recommended
way to load system libraries.
In practice, it does not make a difference: the `ws2_32.dll` library
containing the IPv6 functions is already loaded into memory, so
LoadLibrary() simply reuses the already-loaded library.
Still, recommended way is recommended way, so let's use that instead.
While at it, also adjust the code in contrib/ that loads system libraries.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running "make" in contrib/credential/netrc should run the "all" target
rather than the "test" target. Add an empty "all::" target like most of
our other Makefiles.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The netrc test.pl script calls git-credential-netrc which imports the
Git module. Pass GITPERLLIB to git-credential-netrc via PERL5LIB to
ensure the in-tree Git module is used for testing.
Signed-off-by: Luis Marsano <luis.marsano@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "autodie" module was added in Perl 5.10.1, but our INSTALL
document says "version 5.8 or later is needed".
As discussed in <87efhfvxzu.fsf@evledraar.gmail.com> this script is in
contrib/, so we might not want to apply that policy, however in this
case "autodie" was recently added as a "gratuitous safeguard" in
786ef50a23 ("git-credential-netrc: accept gpg option",
2018-05-12) (see
<CAHqJXRE8OKSKcck1APHAHccLZhox+tZi8nNu2RA74RErX8s3Pg@mail.gmail.com>).
Looking at it more carefully the addition of "autodie" inadvertently
introduced a logic error, since having it is equivalent to this patch:
@@ -245,10 +244,10 @@ sub load_netrc {
if ($gpgmode) {
my @cmd = ($options{'gpg'}, qw(--decrypt), $file);
log_verbose("Using GPG to open $file: [@cmd]");
- open $io, "-|", @cmd;
+ open $io, "-|", @cmd or die "@cmd: $!";
} else {
log_verbose("Opening $file...");
- open $io, '<', $file;
+ open $io, '<', $file or die "$file: $!$!;
}
# nothing to do if the open failed (we log the error later)
As shown in the context the intent of that code is not do die but to
log the error later.
Per my reading of the file this was the only thing autodie was doing
in this file (there was no other code it altered). So let's remove it,
both to fix the logic error and to get rid of the dependency.
1. <87efhfvxzu.fsf@evledraar.gmail.com>
(https://public-inbox.org/git/87efhfvxzu.fsf@evledraar.gmail.com/)
2. <CAHqJXRE8OKSKcck1APHAHccLZhox+tZi8nNu2RA74RErX8s3Pg@mail.gmail.com>
(https://public-inbox.org/git/CAHqJXRE8OKSKcck1APHAHccLZhox+tZi8nNu2RA74RErX8s3Pg@mail.gmail.com/)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-credential-netrc was hardcoded to decrypt with 'gpg' regardless of
the gpg.program option. This is a problem on distributions like Debian
that call modern GnuPG something else, like 'gpg2'.
Set the command according to these settings in descending precedence
1. the git-credential-netrc command -g|--gpg option
2. the git gpg.program configuration option
3. the default: 'gpg'
For conformance with Documentation/CodingGuidelines
- use Git.pm for repository and global option queries
- document -g|--gpg command option in command usage
- test repository & command options
- write documentation placeholders according to main standards
Signed-off-by: Luis Marsano <luis.marsano@gmail.com>
Acked-by: Ted Zlatanov <tzz@lifelogs.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-credential-netrc tests did not run in a test repository.
Reuse the main test framework to stage a temporary repository.
To imitate Perl tests under t/
- switch to Test::More module
- use File::Basename & File::Spec::Functions
Signed-off-by: Luis Marsano <luis.marsano@gmail.com>
Acked-by: Ted Zlatanov <tzz@lifelogs.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The mailing address for the FSF has changed over the years. Rather than
updating the address across all files, refer readers to gnu.org, as the
GNU GPL documentation now suggests for license notices. The mailing
address is retained in the full license files (COPYING and LGPL-2.1).
The old address is still present in t/diff-lib/COPYING. This is
intentional, as the file is used in tests and the contents are not
expected to change.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Credentials exposed by the secret service DBUS interface may be locked.
Setting the SECRET_SEARCH_UNLOCK flag will make the secret service
unlock these secrets, possibly prompting the user for credentials to do
so. Without this flag, the secret is simply not loaded.
Signed-off-by: Dennis Kaarsemaker <dennis@kaarsemaker.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Empty (length 0) usernames and/or passwords, when saved in the Windows
Credential Manager, come back as null when reading the credential.
One use case for such empty credentials is with NTLM authentication, where
empty username and password instruct libcurl to authenticate using the
credentials of the currently logged-on user (single sign-on).
When locating the relevant credentials, make empty username match null.
When outputting the credentials, handle nulls correctly.
Signed-off-by: Jakub Bereżański <kuba@berezanscy.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new credential helper that talks via "libsecret" with
implementations of XDG Secret Service API has been added to
contrib/credential/.
* mm/credential-libsecret:
contrib: add credential helper for libsecret
This is based on the existing gnome-keyring helper, but instead of
libgnome-keyring (which was specific to GNOME and is deprecated), it
uses libsecret which can support other implementations of XDG Secret
Service API.
Passes t0303-credential-external.sh.
Signed-off-by: Mantas Mikulėnas <grawity@gmail.com>
Reviewed-by: Dennis Kaarsemaker <dennis@kaarsemaker.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Helpful if your pkg-config executable has a prefix based on the
architecture, for example.
Signed-off-by: Heiko Becker <heirecka@exherbo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Such a username with "@" in it isn't all that unusual these days.
cf. https://groups.google.com/forum/#!msg/msysgit/YVuCqmwwRyY/HULHj5OoE88J
Signed-off-by: Aleksey Vasenev <margtu-fivt@ya.ru>
Acked-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Acked-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Acked-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: John Szakmeister <john@szakmeister.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Felipe Contreras <felipe.contreras@gmail.com>
Cleanups and tweaks for credential handling to work with ancient versions
of the gnome-keyring library that are still in use.
* bc/gnome-keyring:
contrib/git-credential-gnome-keyring.c: support really ancient gnome-keyring
contrib/git-credential-gnome-keyring.c: support ancient gnome-keyring
contrib/git-credential-gnome-keyring.c: report failure to store password
contrib/git-credential-gnome-keyring.c: use glib messaging functions
contrib/git-credential-gnome-keyring.c: use glib memory allocation functions
contrib/git-credential-gnome-keyring.c: use secure memory for reading passwords
contrib/git-credential-gnome-keyring.c: use secure memory functions for passwds
contrib/git-credential-gnome-keyring.c: use gnome helpers in keyring_object()
contrib/git-credential-gnome-keyring.c: set Gnome application name
contrib/git-credential-gnome-keyring.c: ensure buffer is non-empty before accessing
contrib/git-credential-gnome-keyring.c: strlen() returns size_t, not ssize_t
contrib/git-credential-gnome-keyring.c: exit non-zero when called incorrectly
contrib/git-credential-gnome-keyring.c: add static where applicable
contrib/git-credential-gnome-keyring.c: *style* use "if ()" not "if()" etc.
contrib/git-credential-gnome-keyring.c: remove unused die() function
contrib/git-credential-gnome-keyring.c: remove unnecessary pre-declarations
The gnome-keyring lib (0.4) distributed with RHEL 4.X is really ancient
and does not provide most of the synchronous functions that even ancient
releases do. Thankfully, we're only using one function that is missing.
Let's emulate gnome_keyring_item_delete_sync() by calling the asynchronous
function and then triggering the event loop processing until our
callback is called.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The gnome-keyring lib distributed with RHEL 5.X is ancient and does
not provide a few of the functions/defines that more recent versions
do, but mostly the API is the same. Let's provide the missing bits
via macro definitions and function implementation.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Produce an error message when we fail to store a password to the keyring.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rather than roll our own, let's use the messaging functions provided
by glib.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rather than roll our own, let's use the memory allocation/free routines
provided by glib.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
gnome-keyring provides functions to allocate non-pageable memory (if
possible). Let's use them to allocate memory that may be used to hold
secure data read from the keyring.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
gnome-keyring provides functions for allocating non-pageable memory (if
possible) intended to be used for storing passwords. Let's use them.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rather than carefully allocating memory for sprintf() to write into,
let's make use of the glib helper function g_strdup_printf(), which
makes things a lot easier and less error-prone.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since this is a Gnome application, let's set the application name to
something reasonable. This will be displayed in Gnome dialog boxes
e.g. the one that prompts for the user's keyring password.
We add an include statement for glib.h and add the glib-2.0 cflags and
libs to the compilation arguments, but both of these are really noops
since glib is already a dependency of gnome-keyring.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ensure buffer length is non-zero before attempting to access the last
element.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also, initialization is not necessary since it is assigned before it is
used.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the correct arguments were not specified, this program should exit
non-zero. Let's do so.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>