The function `block_reader_start()` does not really apply to the block
reader, but to the block iterator. It's name is thus somewhat confusing.
Rename it to `block_iter_seek_start()` to clarify.
We will rename `block_reader_seek()` in similar spirit in the next
commit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When advice.waitingForEditor configuration is not set to false, we show
a hint telling that we are waiting for user's editor to close the file
when we launch an editor and wait for it to return control back to us.
We give the message on an incomplete line, expecting that we can go back
to the beginning of the line and clear the message when the editor returns.
However, it is possible that the editor exits with an error status, in
which case we show an error message and then return to our caller. In
such a case, the error message is given where the terminal cursor
happens to be, which is most likely after the "we are waiting for your
editor" message on the same line.
Clear the line before showing the error.
While we're here, make the error message follow our CodingGuideLines.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The former is somewhat imprecise. The latter became out of sync with the
behavior in e814c39c2f (fast-import: refactor parsing of spaces,
2014-06-18).
Signed-off-by: Thalia Archibald <thalia@archibald.dev>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
NUL cannot appear in paths. Even disregarding filesystem path
limitations, the tree object format delimits with NUL, so such a path
cannot be encoded by Git.
When a quoted path is unquoted, it could possibly contain NUL from
"\000". Forbid it so it isn't truncated.
fast-import still has other issues with NUL, but those will be addressed
later.
Signed-off-by: Thalia Archibald <thalia@archibald.dev>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simply saying “C-style” string quoting is imprecise, as only a subset of
C escapes are supported. Document the exact escapes.
Signed-off-by: Thalia Archibald <thalia@archibald.dev>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It describes what characters cannot be in an unquoted path, but not
their semantics. Reframe it as a definition of unquoted paths. From the
perspective of the parser, whether it starts with `"` is what defines
whether it will parse it as quoted or unquoted.
The restrictions on characters in unquoted paths (with starting-", LF,
and spaces) are explained in the quoted paragraph. Move it to the
unquoted paragraph and reword.
The restriction that the source paths of filecopy and filerename cannot
contain SP is only stated in their respective sections. Restate it in
the <path> section.
Signed-off-by: Thalia Archibald <thalia@archibald.dev>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The strbuf in `note_change_n` is to copy the remainder of `p` before
potentially invalidating it when reading the next line. However, `p` is
not used after that point. It has been unused since the function was
created in a8dd2e7d2b (fast-import: Add support for importing commit
notes, 2009-10-09) and looks to be a fossil from adapting
`file_change_m`. Remove it.
Signed-off-by: Thalia Archibald <thalia@archibald.dev>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ever since filerename was added in f39a946a1f (Support wholesale
directory renames in fast-import, 2007-07-09) and filecopy in b6f3481bb4
(Teach fast-import to recursively copy files/directories, 2007-07-15),
both have produced an error when the destination path is empty. Later,
when support for targeting the root directory with an empty string was
added in 2794ad5244 (fast-import: Allow filemodify to set the root,
2010-10-10), this had the effect of allowing the quoted empty string
(`""`), but forbidding its unquoted variant (``). This seems to have
been intended as simple data validation for parsing two paths, rather
than a syntax restriction, because it was not extended to the other
operations.
All other occurrences of paths (in filemodify, filedelete, the source of
filecopy and filerename, and ls) allow both.
For most of this feature's lifetime, the documentation has not
prescribed the use of quoted empty strings. In e5959106d6
(Documentation/fast-import: put explanation of M 040000 <dataref> "" in
context, 2011-01-15), its documentation was changed from “`<path>` may
also be an empty string (`""`) to specify the root of the tree” to “The
root of the tree can be represented by an empty string as `<path>`”.
Thus, we should assume that some front-ends have depended on this
behavior.
Remove this restriction for the destination paths of filecopy and
filerename and change tests targeting the root to test `""` and ``.
Signed-off-by: Thalia Archibald <thalia@archibald.dev>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, one case would not write the path to the strbuf: when the
path is unquoted and at the end of the string. It was essentially
copy-on-write. However, with the logic simplification of the previous
commit, this case was eliminated and the strbuf is always populated.
Directly use the strbufs now instead of an alias.
Since this already changes all the lines that use the strbufs, rename
them from `uq` to be more descriptive. That they are unquoted is not
their most important property, so name them after what they carry.
Additionally, `file_change_m` no longer needs to copy the path before
reading inline data.
Signed-off-by: Thalia Archibald <thalia@archibald.dev>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Path parsing in fast-import is inconsistent and many unquoting errors
are suppressed or not checked.
<path> appears in the grammar in these places:
filemodify ::= 'M' SP <mode> (<dataref> | 'inline') SP <path> LF
filedelete ::= 'D' SP <path> LF
filecopy ::= 'C' SP <path> SP <path> LF
filerename ::= 'R' SP <path> SP <path> LF
ls ::= 'ls' SP <dataref> SP <path> LF
ls-commit ::= 'ls' SP <path> LF
and fast-import.c parses them in five different ways:
1. For filemodify and filedelete:
Try to unquote <path>. If it unquotes without errors, use the
unquoted version; otherwise, treat it as literal bytes to the end of
the line (including any number of SP).
2. For filecopy (source) and filerename (source):
Try to unquote <path>. If it unquotes without errors, use the
unquoted version; otherwise, treat it as literal bytes up to, but not
including, the next SP.
3. For filecopy (dest) and filerename (dest):
Like 1., but an unquoted empty string is forbidden.
4. For ls:
If <path> starts with `"`, unquote it and report parse errors;
otherwise, treat it as literal bytes to the end of the line
(including any number of SP).
5. For ls-commit:
Unquote <path> and report parse errors.
(It must start with `"` to disambiguate from ls.)
In the first three, any errors from trying to unquote a string are
suppressed, so a quoted string that contains invalid escapes would be
interpreted as literal bytes. For example, `"\xff"` would fail to
unquote (because hex escapes are not supported), and it would instead be
interpreted as the byte sequence '"', '\\', 'x', 'f', 'f', '"', which is
certainly not intended. Some front-ends erroneously use their language's
standard quoting routine instead of matching Git's, which could silently
introduce escapes that would be incorrectly parsed due to this and lead
to data corruption.
The documentation states “To use a source path that contains SP the path
must be quoted.”, so it is expected that some implementations depend on
spaces being allowed in paths in the final position. Thus we have two
documented ways to parse paths, so simplify the implementation to that.
Now we have:
1. `parse_path_eol` for filemodify, filedelete, filecopy (dest),
filerename (dest), ls, and ls-commit:
If <path> starts with `"`, unquote it and report parse errors;
otherwise, treat it as literal bytes to the end of the line
(including any number of SP).
2. `parse_path_space` for filecopy (source) and filerename (source):
If <path> starts with `"`, unquote it and report parse errors;
otherwise, treat it as literal bytes up to, but not including, the
next SP. It must be followed by SP.
There remain two special cases: The dest <path> in filecopy and rename
cannot be an unquoted empty string (this will be addressed subsequently)
and <path> in ls-commit must be quoted to disambiguate it from ls.
Signed-off-by: Thalia Archibald <thalia@archibald.dev>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up by splitting code responsible for writing midx files
into its own file.
* tb/midx-write:
midx-write.c: use `--stdin-packs` when repacking
midx-write.c: check count of packs to repack after grouping
midx-write.c: factor out common want_included_pack() routine
midx-write: move writing-related functions from midx.c
t-prio-queue test has been cleaned up by using C99 compound
literals; this is meant to also serve as a weather-balloon to smoke
out folks with compilers who have trouble compiling code that uses
the feature.
* rs/t-prio-queue-cleanup:
t-prio-queue: simplify using compound literals
Reftable code clean-up and some bugfixes.
* ps/reftable-binsearch-updates:
reftable/block: avoid decoding keys when searching restart points
reftable/record: extract function to decode key lengths
reftable/block: fix error handling when searching restart points
reftable/block: refactor binary search over restart points
reftable/refname: refactor binary search over refnames
reftable/basics: improve `binsearch()` test
reftable/basics: fix return type of `binsearch()` to be `size_t`
"git checkout/switch --detach foo", after switching to the detached
HEAD state, gave the tracking information for the 'foo' branch,
which was pointless.
Tested-by: M Hickford <mirth.hickford@gmail.com>
cf. <CAGJzqsmE9FDEBn=u3ge4LA3ha4fDbm4OWiuUbMaztwjELBd7ug@mail.gmail.com>
* jc/checkout-detach-wo-tracking-report:
checkout: omit "tracking" information on a detached HEAD
Match the option argument type in the help text to the correct type
updated by a recent series.
* js/merge-tree-3-trees:
merge-tree: fix argument type of the `--merge-base` option
In 5f43cf5b2e (merge-tree: accept 3 trees as arguments, 2024-01-28), I
taught `git merge-tree` to perform three-way merges on trees. This
commit even changed the manual page to state that the `--merge-base`
option takes a tree-ish rather than requiring a commit.
But I forgot to adjust the in-program help text. This patch fixes that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit corrects a typographical error found in both
date-formats.txt and git-fast-import.txt documentation, where the term
`email format` was mistakenly used instead of `date format`.
Signed-off-by: Xing Xin <xingxin.xx@bytedance.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Across only three files, comments and a single function name used
'commitish' rather than 'commit-ish' or 'committish' as the spelling.
The git glossary accepts a hyphen or a double-t, but not a single-t.
Despite the typo in a translation file, none of the typos appear in
user-visible locations.
Signed-off-by: Pi Fisher <Pi.L.D.Fisher@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Doc update, as a preparation to enhance "git update-ref --stdin".
* kn/clarify-update-ref-doc:
githooks: use {old,new}-oid instead of {old,new}-value
update-ref: use {old,new}-oid instead of {old,new}value
Another "set -u" fix for the bash prompt (in contrib/) script.
* vs/complete-with-set-u-fix:
completion: protect prompt against unset SHOWUPSTREAM in nounset mode
completion: fix prompt with unset SHOWCONFLICTSTATE in nounset mode
CST6CDT and the like are POSIX timezone, with no rule for transition.
And POSIX doesn't enforce how to interpret the rule if it's omitted.
Some libc (e.g. glibc) resorted back to IANA (formerly Olson) db rules
for those timezones. Some libc (e.g. FreeBSD) uses a fixed rule.
Other libc (e.g. musl) interpret that as no transition at all [1].
In addition, distributions (notoriously Debian-derived, which uses IANA
db for CST6CDT and the like) started to split "legacy" timezones
like CST6CDT, EST5EDT into `tzdata-legacy', which will not be installed
by default [2].
In those cases, t9604 will run into failure.
Let's switch to POSIX timezone with rules to change timezone.
1: http://mm.icann.org/pipermail/tz/2024-March/058751.html
2: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1043250
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We use tabs to indent, not two or four spaces.
These days, even the test fixture preparation should be done inside
test_expect_success block.
Address these two style violations in this test.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test file assumes the "apply" backend is the default which is not
the case since 2ac0d6273f (rebase: change the default backend from "am"
to "merge", 2020-02-15). Make sure the "apply" backend is tested by
specifying it explicitly.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using a helper function makes the tests shorter and avoids running "git
cat-file" upstream of a pipe.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Perform the setup in a dedicated test so the later tests can be run
independently. Also avoid running git upstream of a pipe and take
advantage of test_commit.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use advice_if_enabled() API to rewrite a simple pattern to
call advise() after checking advice_enabled().
* rj/use-adv-if-enabled:
add: use advise_if_enabled for ADVICE_ADD_EMBEDDED_REPO
add: use advise_if_enabled for ADVICE_ADD_EMPTY_PATHSPEC
add: use advise_if_enabled for ADVICE_ADD_IGNORED_FILE
"git pack-refs" learned the "--auto" option, which is a useful
addition to be triggered from "git gc --auto".
Acked-by: Karthik Nayak <karthik.188@gmail.com>
cf. <CAOLa=ZRAEA7rSUoYL0h-2qfEELdbPHbeGpgBJRqesyhHi9Q6WQ@mail.gmail.com>
* ps/pack-refs-auto:
builtin/gc: pack refs when using `git maintenance run --auto`
builtin/gc: forward git-gc(1)'s `--auto` flag when packing refs
t6500: extract objects with "17" prefix
builtin/gc: move `struct maintenance_run_opts`
builtin/pack-refs: introduce new "--auto" flag
builtin/pack-refs: release allocated memory
refs/reftable: expose auto compaction via new flag
refs: remove `PACK_REFS_ALL` flag
refs: move `struct pack_refs_opts` to where it's used
t/helper: drop pack-refs wrapper
refs/reftable: print errors on compaction failure
reftable/stack: gracefully handle failed auto-compaction due to locks
reftable/stack: use error codes when locking fails during compaction
reftable/error: discern locked/outdated errors
reftable/stack: fix error handling in `reftable_stack_init_addition()`
The test script had an incomplete and ineffective attempt to avoid
clobbering the testing user's real crontab (and its equivalents),
which has been completed.
* es/test-cron-safety:
test-lib: fix non-functioning GIT_TEST_MAINT_SCHEDULER fallback
"git add -p" and other "interactive hunk selection" UI has learned to
skip showing the hunk immediately after it has already been shown, and
an additional action to explicitly ask to reshow the current hunk.
* rj/add-p-explicit-reshow:
add-patch: do not print hunks repeatedly
add-patch: introduce 'p' in interactive-patch
Documentation rules has been explicitly described how to mark-up
literal parts and a few manual pages have been updated as examples.
* ja/doc-markup-updates:
doc: git-clone: do not autoreference the manpage in itself
doc: git-clone: apply new documentation formatting guidelines
doc: git-init: apply new documentation formatting guidelines
doc: allow literal and emphasis format in doc vs help tests
doc: rework CodingGuidelines with new formatting rules
The "hint:" messages given by the advice mechanism, when given a
message with a blank line, left a line with trailing whitespace,
which has been cleansed.
* jc/advice-sans-trailing-whitespace:
advice: omit trailing whitespace
"git apply" failed to extract the filename the patch applied to,
when the change was about an empty file created in or deleted from
a directory whose name ends with a SP, which has been corrected.
* jc/apply-parse-diff-git-header-names-fix:
t4126: fix "funny directory name" test on Windows (again)
t4126: make sure a directory with SP at the end is usable
apply: parse names out of "diff --git" more carefully
The tests for git-pack-refs(1) with the `core.sharedRepository` config
execute git-pack-refs(1) outside of the shell that has the expected
umask set. This is wrong because we want to test the behaviour of that
command with different umasks. The issue went unnoticed because most
distributions have a default umask of 0022, and we only ever test with
`--shared=true`, which re-adds the group write bit.
Fix the issue by moving git-pack-refs(1) into the umask'd shell and add
a bunch of test cases that exercise behaviour more thoroughly.
Note that we drop the check for whether `core.sharedRepository` was set
to the correct value to make the test setup a bit easier. We should be
able to rely on git-init(1) doing its thing correctly. Furthermore, to
help readability, we convert tests that pass `--shared=true` to instead
pass the equivalent `--shared=group`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have two kinds of `--shared=` tests, one for git-init(1) and one for
git-pack-refs(1). Merge them into a reusable function such that we can
easily add additional testcases with different umasks and flags for the
`--shared=` switch.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our top-level Makefile follows our generic whitespace rule
established by the top-level .gitattributes file that does not
enforce indent-with-non-tab rule by default, but git-gui is set up
to enforce indent-with-non-tab by default. With the upcoming change
to GNU make, we no longer can reject (and worse, "fix") a patch that
adds whitespace indented lines to the Makefile, so loosen the rule
there for git-gui/Makefile, too.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In GNU Make commit 07fcee35 ([SV 64815] Recipe lines cannot contain
conditional statements, 2023-05-22) and following, conditional
statements may no longer be preceded by a tab character (which Make
refers to as the recipe prefix).
There are a handful of spots in our various Makefile(s) which will break
in a future release of Make containing 07fcee35. For instance, trying to
compile the pre-image of this patch with the tip of make.git results in
the following:
$ make -v | head -1 && make
GNU Make 4.4.90
config.mak.uname:842: *** missing 'endif'. Stop.
The kernel addressed this issue in 82175d1f9430 (kbuild: Replace tabs
with spaces when followed by conditionals, 2024-01-28). Address the
issues in Git's tree by applying the same strategy.
When a conditional word (ifeq, ifneq, ifdef, etc.) is preceded by one or
more tab characters, replace each tab character with 8 space characters
with the following:
find . -type f -not -path './.git/*' -name Makefile -or -name '*.mak' |
xargs perl -i -pe '
s/(\t+)(ifn?eq|ifn?def|else|endif)/" " x (length($1) * 8) . $2/ge unless /\\$/
'
The "unless /\\$/" removes any false-positives (like "\telse \"
appearing within a shell script as part of a recipe).
After doing so, Git compiles on newer versions of Make:
$ make -v | head -1 && make
GNU Make 4.4.90
GIT_VERSION = 2.44.0.414.gfac1dc44ca9
[...]
$ echo $?
0
Reported-by: Dario Gjorgjevski <dario.gjorgjevski@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The excludes_file variable is marked "const char *", but all the
assignments to it are made with a piece of memory allocated just
for it, and the variable is responsible for owning it.
When "core.excludesfile" is read, the code just lost the previous
value, leaking memory. Plug it.
The real problem is that the variable is mistyped; our convention
is to never make a variable that owns the piece of memory pointed
by it as "const". Fixing that would reduce the chance of this kind
of bug happening, and also would make it unnecessary to cast the
constness away while free()ing it, but that would be a much larger
follow-up effort.
Reported-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To reduce the number of on-disk reftables, compaction is performed.
Contiguous tables with the same binary log value of size are grouped
into segments. The segment that has both the lowest binary log value and
contains more than one table is set as the starting point when
identifying the compaction segment.
Since segments containing a single table are not initially considered
for compaction, if the table appended to the list does not match the
previous table log value, no compaction occurs for the new table. It is
therefore possible for unbounded growth of the table list. This can be
demonstrated by repeating the following sequence:
git branch -f foo
git branch -d foo
Each operation results in a new table being written with no compaction
occurring until a separate operation produces a table matching the
previous table log value.
Instead, to avoid unbounded growth of the table list, the compaction
strategy is updated to ensure tables follow a geometric sequence after
each operation by individually evaluating each table in reverse index
order. This strategy results in a much simpler and more robust algorithm
compared to the previous one while also maintaining a minimal ordered
set of tables on-disk.
When creating 10 thousand references, the new strategy has no
performance impact:
Benchmark 1: update-ref: create refs sequentially (revision = HEAD~)
Time (mean ± σ): 26.516 s ± 0.047 s [User: 17.864 s, System: 8.491 s]
Range (min … max): 26.447 s … 26.569 s 10 runs
Benchmark 2: update-ref: create refs sequentially (revision = HEAD)
Time (mean ± σ): 26.417 s ± 0.028 s [User: 17.738 s, System: 8.500 s]
Range (min … max): 26.366 s … 26.444 s 10 runs
Summary
update-ref: create refs sequentially (revision = HEAD) ran
1.00 ± 0.00 times faster than update-ref: create refs sequentially (revision = HEAD~)
Some tests in `t0610-reftable-basics.sh` assert the on-disk state of
tables and are therefore updated to specify the correct new table count.
Since compaction is more aggressive in ensuring tables maintain a
geometric sequence, the expected table count is reduced in these tests.
In `reftable/stack_test.c` tests related to `sizes_to_segments()` are
removed because the function is no longer needed. Also, the
`test_suggest_compaction_segment()` test is updated to better showcase
and reflect the new geometric compaction behavior.
Signed-off-by: Justin Tobler <jltobler@gmail.com>
Acked-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In future tests it will be neccesary to create repositories with a set
number of tables. To make this easier, introduce the
`GIT_TEST_REFTABLE_AUTOCOMPACTION` environment variable that, when set
to false, disables autocompaction of reftables.
Signed-off-by: Justin Tobler <jltobler@gmail.com>
Acked-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The reftable stack already has a variable to configure whether or not to
run auto-compaction, but it is inaccessible to users of the library.
There exist use cases where a caller may want to have more control over
auto-compaction.
Move the `disable_auto_compact` option into `reftable_write_options` to
allow external callers to disable auto-compaction. This will be used in
a subsequent commit.
Signed-off-by: Justin Tobler <jltobler@gmail.com>
Acked-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The series was based on maint and fixes all the tests that exist
there, but we have acquired a few more.
I suspect that the values assigned in many of these places are $IFS
safe, and this is primarily to squelch the linter than adding a
necessary workaround for buggy dash.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
