The upload-pack program, when talking over v2, accepted the
packfile-uris protocol extension from the client, even if it did
not advertise the capability, which has been corrected.
* jk/upload-pack-v2-capability-cleanup:
upload-pack: only accept packfile-uris if we advertised it
upload-pack: use existing config mechanism for advertisement
upload-pack: centralize setup of sideband-all config
upload-pack: use repository struct to get config
Various parts of upload-pack has been updated to bound the resource
consumption relative to the size of the repository to protect from
abusive clients.
* jk/upload-pack-bounded-resources:
upload-pack: free tree buffers after parsing
upload-pack: use PARSE_OBJECT_SKIP_HASH_CHECK in more places
upload-pack: always turn off save_commit_buffer
upload-pack: disallow object-info capability by default
upload-pack: accept only a single packfile-uri line
upload-pack: use a strmap for want-ref lines
upload-pack: use oidset for deepen_not list
upload-pack: switch deepen-not list to an oid_array
upload-pack: drop separate v2 "haves" array
Clients are only supposed to request particular capabilities or features
if the server advertised them. For the "packfile-uris" feature, we only
advertise it if uploadpack.blobpacfileuri is set, but we always accept a
request from the client regardless.
In practice this doesn't really hurt anything, as we'd pass the client's
protocol list on to pack-objects, which ends up ignoring it. But we
should try to follow the protocol spec, and tightening this up may catch
buggy or misbehaving clients more easily.
Thanks to recent refactoring, we can hoist the config check from
upload_pack_advertise() into upload_pack_config(). Note the subtle
handling of a value-less bool (which does not count for triggering an
advertisement).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When serving a v2 capabilities request, we call upload_pack_advertise()
to tell us the set of features we can advertise to the client. That
involves looking at various config options, all of which need to be kept
in sync with the rules we use in upload_pack_config to set flags like
allow_filter, allow_sideband_all, and so on. If these two pieces of code
get out of sync then we may refuse to respect a capability we
advertised, or vice versa accept one that we should not.
Instead, let's call the same config helper that we'll use for processing
the actual client request, and then just pick the values out of the
resulting struct. This is only a little bit shorter than the current
code, but we don't repeat any policy logic (e.g., we don't have to worry
about the magic sideband-all environment variable here anymore).
And this reveals a gap in the existing code: there is no struct flag for
the packfile-uris capability (we accept it even if it is not advertised,
which we should not). We'll leave the advertisement code for now and
deal with it in the next patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We read uploadpack.allowsidebandall to set a matching flag in our
upload_pack_data struct. But for our tests, we also respect
GIT_TEST_SIDEBAND_ALL from the environment, and anybody looking at the
flag in the struct needs to remember to check both. There's only one
such piece of code now, but we're about to add another.
So let's have the config step actually fold the environment value into
the struct, letting the rest of the code use the flag in the obvious
way.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our upload_pack_v2() function gets a repository struct, but we ignore it
totally. In practice this doesn't cause any problems, as it will never
differ from the_repository. But in the spirit of taking a small step
towards getting rid of the_repository, let's at least starting using it
to grab config. There are probably other spots that could benefit, but
it's a start.
Note that we don't need to pass the repo for protected_config(); the
whole point there is that we are not looking at repo config, so there is
no repo-specific version of the function.
For the v0 version of the protocol, we're not passed a repository
struct, so we'll continue to use the_repository there.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a client sends us a "want" or "have" line, we call parse_object()
to get an object struct. If the object is a tree, then the parsed state
means that tree->buffer points to the uncompressed contents of the tree.
But we don't really care about it. We only really need to parse commits
and tags; for trees and blobs, the important output is just a "struct
object" with the correct type.
But much worse, we do not ever free that tree buffer. It's not leaked in
the traditional sense, in that we still have a pointer to it from the
global object hash. But if the client requests many trees, we'll hold
all of their contents in memory at the same time.
Nobody really noticed because it's rare for clients to directly request
a tree. It might happen for a lightweight tag pointing straight at a
tree, or it might happen for a "tree:depth" partial clone filling in
missing trees.
But it's also possible for a malicious client to request a lot of trees,
causing upload-pack's memory to balloon. For example, without this
patch, requesting every tree in git.git like:
pktline() {
local msg="$*"
printf "%04x%s\n" $((1+4+${#msg})) "$msg"
}
want_trees() {
pktline command=fetch
printf 0001
git cat-file --batch-all-objects --batch-check='%(objectname) %(objecttype)' |
while read oid type; do
test "$type" = "tree" || continue
pktline want $oid
done
pktline done
printf 0000
}
want_trees | GIT_PROTOCOL=version=2 valgrind --tool=massif ./git upload-pack . >/dev/null
shows a peak heap usage of ~3.7GB. Which is just about the sum of the
sizes of all of the uncompressed trees. For linux.git, it's closer to
17GB.
So the obvious thing to do is to call free_tree_buffer() after we
realize that we've parsed a tree. We know that upload-pack won't need it
later. But let's push the logic into parse_object_with_flags(), telling
it to discard the tree buffer immediately. There are two reasons for
this. One, all of the relevant call-sites already call the with_options
variant to pass the SKIP_HASH flag. So it actually ends up as less code
than manually free-ing in each spot. And two, it enables an extra
optimization that I'll discuss below.
I've touched all of the sites that currently use SKIP_HASH in
upload-pack. That drops the peak heap of the upload-pack invocation
above from 3.7GB to ~24MB.
I've also modified the caller in get_reference(); a partial clone
benefits from its use in pack-objects for the reasons given in
0bc2557951 (upload-pack: skip parse-object re-hashing of "want" objects,
2022-09-06), where we were measuring blob requests. But note that the
results of get_reference() are used for traversing, as well; so we
really would _eventually_ use the tree contents. That makes this at
first glance a space/time tradeoff: we won't hold all of the trees in
memory at once, but we'll have to reload them each when it comes time to
traverse.
And here's where our extra optimization comes in. If the caller is not
going to immediately look at the tree contents, and it doesn't care
about checking the hash, then parse_object() can simply skip loading the
tree entirely, just like we do for blobs! And now it's not a space/time
tradeoff in get_reference() anymore. It's just a lazy-load: we're
delaying reading the tree contents until it's time to actually traverse
them one by one.
And of course for upload-pack, this optimization means we never load the
trees at all, saving lots of CPU time. Timing the "every tree from
git.git" request above shows upload-pack dropping from 32 seconds of CPU
to 19 (the remainder is mostly due to pack-objects actually sending the
pack; timing just the upload-pack portion shows we go from 13s to
~0.28s).
These are all highly gamed numbers, of course. For real-world
partial-clone requests we're saving only a small bit of time in
practice. But it does help harden upload-pack against malicious
denial-of-service attacks.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit 0bc2557951 (upload-pack: skip parse-object re-hashing of
"want" objects, 2022-09-06), we optimized the parse_object() calls for
v2 "want" lines from the client so that they avoided parsing blobs, and
so that they used the commit-graph rather than parsing commit objects
from scratch.
We should extend that to two other spots:
1. We parse "have" objects in the got_oid() function. These won't
generally be non-commits (unlike "want" lines from a partial
clone). But we still benefit from the use of the commit-graph.
2. For v0, the "want" lines are parsed in receive_needs(). These are
also less likely to be non-commits because by default they have to
be ref tips. There are config options you might set to allow
non-tip objects, but you'd mostly do so to support partial clones,
and clients recent enough to support partial clone will generally
speak v2 anyway.
So I don't expect this change to improve performance much for day-to-day
operations. But both are possible denial-of-service vectors, where an
attacker can waste our time by sending over a large number of objects to
parse (of course we may waste even more time serving a pack to them, but
we try as much as possible to optimize that in pack-objects; we should
do what we can here in upload-pack, too).
With this patch, running p5600 with GIT_TEST_PROTOCOL_VERSION=0 shows
similar results to what we saw in 0bc2557951 (which ran with the v2
protocol by default). Here are the numbers for linux.git:
Test HEAD^ HEAD
-----------------------------------------------------------------------------
5600.3: checkout of result 50.91(87.95+2.93) 41.75(79.00+3.18) -18.0%
Or for a more extreme (and malicious) case, we can claim to "have" every
blob in git.git over the v0 protocol:
$ {
echo "0032want $(git rev-parse HEAD)"
printf 0000
git cat-file --batch-all-objects --batch-check='%(objectname) %(objecttype)' |
perl -alne 'print "0032have $F[0]" if $F[1] eq "blob"'
} >input
$ time ./git.old upload-pack . <input >/dev/null
real 0m52.951s
user 0m51.633s
sys 0m1.304s
$ time ./git.new upload-pack . <input >/dev/null
real 0m0.261s
user 0m0.156s
sys 0m0.105s
(Note that these don't actually compute a pack because of the hacky
protocol usage, so those numbers are representing the raw blob-parsing
effort done by upload-pack).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the client sends us "want $oid" lines, we call parse_object($oid)
to get an object struct. It's important to parse the commits because we
need to traverse them in the negotiation phase. But of course we don't
need to hold on to the commit messages for each one.
We've turned off the save_commit_buffer flag in get_common_commits() for
a long time, since f0243f26f6 (git-upload-pack: More efficient usage of
the has_sha1 array, 2005-10-28). That helps with the commits we see
while actually traversing. But:
1. That function is only used by the v0 protocol. I think the v2
protocol's code path leaves the flag on (and thus pays the extra
memory penalty), though I didn't measure it specifically.
2. If the client sends us a bunch of "want" lines, that happens before
the negotiation phase. So we'll hold on to all of those commit
messages. Generally the number of "want" lines scales with the
refs, not with the number of objects in the repo. But a malicious
client could send a lot in order to waste memory.
As an example of (2), if I generate a request to fetch all commits in
git.git like this:
pktline() {
local msg="$*"
printf "%04x%s\n" $((1+4+${#msg})) "$msg"
}
want_commits() {
pktline command=fetch
printf 0001
git cat-file --batch-all-objects --batch-check='%(objectname) %(objecttype)' |
while read oid type; do
test "$type" = "commit" || continue
pktline want $oid
done
pktline done
printf 0000
}
want_commits | GIT_PROTOCOL=version=2 valgrind --tool=massif git-upload-pack . >/dev/null
before this patch upload-pack peaks at ~125MB, and after at ~35MB. The
difference is not coincidentally about the same as the sum of all commit
object sizes as computed by:
git cat-file --batch-all-objects --batch-check='%(objecttype) %(objectsize)' |
perl -alne '$v += $F[1] if $F[0] eq "commit"; END { print $v }'
In a larger repository like linux.git, that number is ~1GB.
In a repository with a full commit-graph file this will have no impact
(and the commit graph would save us from parsing at all, so is a much
better solution!). But it's easy to do, might help a little in
real-world cases (where even if you have a commit graph it might not be
fully up to date), and helps a lot for a worst-case malicious request.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we see a packfile-uri line from the client, we use
string_list_split() to split it on commas and store the result in a
string_list. A single packfile-uri line is therefore limited to storing
~64kb, the size of a pkt-line.
But we'll happily accept multiple such lines, and each line appends to
the string list, growing without bound.
In theory this could be useful, making:
0017packfile-uris http
0018packfile-uris https
equivalent to:
001dpackfile-uris http,https
But the protocol documentation doesn't indicate that this should work
(and indeed, refers to this in the singular as "the following argument
can be included in the client's request"). And the client-side
implementation in fetch-pack has always sent a single line (JGit appears
to understand the line on the server side but has no client-side
implementation, and libgit2 understands neither).
If we were worried about compatibility, we could instead just put a
limit on the maximum number of values we'd accept. The current client
implementation limits itself to only two values: "http" and "https", so
something like "256" would be more than enough. But accepting only a
single line seems more in line with the protocol documentation, and
matches other parts of the protocol (e.g., we will not accept a second
"filter" line).
We'll also make this more explicit in the protocol documentation; as
above, I think this was always the intent, but there's no harm in making
it clear.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the "ref-in-want" capability is advertised (which it is not by
default), then upload-pack processes a "want-ref" line from the client
by checking that the name is a valid ref and recording it in a
string-list.
In theory this list should grow no larger than the number of refs in the
server-side repository. But since we don't do any de-duplication, a
client which sends "want-ref refs/heads/foo" over and over will cause
the array to grow without bound.
We can fix this by switching to strmap, which efficiently detects
duplicates. There are two client-visible changes here:
1. The "wanted-refs" response will now be in an apparently-random
order (based on iterating the hashmap) rather than the order given
by the client. The protocol documentation is quiet on ordering
here. The current fetch-pack implementation is happy with any
order, as it looks up each returned ref using a binary search in
its local sorted list. JGit seems to implement want-ref on the
server side, but has no client-side support. libgit2 doesn't
support either side.
It would obviously be possible to record the original order or to
use the strmap as an auxiliary data structure. But if the client
doesn't care, we may as well do the simplest thing.
2. We'll now reject duplicates explicitly as a protocol error. The
client should never send them (and our current implementation, even
when asked to "git fetch master:one master:two" will de-dup on the
client side).
If we wanted to be more forgiving, we could perhaps just throw away
the duplicates. But then our "wanted-refs" response back to the
client would omit the duplicates, and it's hard to say what a
client that accidentally sent a duplicate would do with that. So I
think we're better off to complain loudly before anybody
accidentally writes such a client.
Let's also add a note to the protocol documentation clarifying that
duplicates are forbidden. As discussed above, this was already the
intent, but it's not very explicit.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We record the oid of every deepen-not line the client sends to us. For a
well-behaved client, the resulting array should be bounded by the number
of unique refs we have. But because there's no de-duplication, a
malicious client can cause the array to grow unbounded by just sending
the same "refs/heads/foo" over and over (assuming such a ref exists).
Since the deepen-not list is just being fed to a "rev-list --not"
traversal, the order of items doesn't matter. So we can replace the
oid_array with an oidset which notices and skips duplicates.
That bounds the memory in malicious cases to be linear in the number of
unique refs. And even in non-malicious cases, there may be a slight
improvement in memory usage if multiple refs point to the same oid
(though in practice this list is probably pretty tiny anyway, as it
comes from the user specifying "--shallow-exclude" on the client fetch).
Note that in the trace2 output we'll now output the number of
de-duplicated objects, rather than the total number of "deepen-not"
lines we received. This is arguably a more useful value for tracing /
debugging anyway.
Reported-by: Benjamin Flesch <benjaminflesch@icloud.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we see a "deepen-not" line from the client, we verify that the
given name can be resolved as a ref, and then add it to a string list to
be passed later to an internal "rev-list --not" traversal. We record the
actual refname in the string list (so the traversal resolves it again
later), but we'd be better off recording the resolved oid:
1. There's a tiny bit of wasted work in resolving it twice.
2. There's a small race condition with simultaneous updates; the later
traversal may resolve to a different value (or not at all). This
shouldn't cause any bad behavior (we do not care about the value
in this first resolution, so whatever value rev-list gets is OK)
but it could mean a confusing error message (if upload-pack fails
to resolve the ref it produces a useful message, but a failing
traversal later results in just "revision walk setup failed").
3. It makes it simpler to de-duplicate the results. We don't de-dup at
all right now, but we will in the next patch.
>From the client's perspective the behavior should be the same.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When upload-pack sees a "have" line in the v0 protocol, it immediately
calls got_oid() with its argument and potentially produces an ACK
response. In the v2 protocol, we simply record the argument in an
oid_array, and only later process all of the "have" objects by calling
the equivalent of got_oid() on the contents of the array.
This makes some sense, as v2 is a pure request/response protocol, as
opposed to v0's asynchronous negotiation phase. But there's a downside:
a client can send us an infinite number of garbage "have" lines, which
we'll happily slurp into the array, consuming memory. Whereas in v0,
they are limited by the number of objects in the repository (because
got_oid() only records objects we have ourselves, and we avoid
duplicates by setting a flag on the object struct).
We can make v2 behave more like v0 by also calling got_oid() directly
when v2 parses a "have" line. Calling it early like this is OK because
got_oid() itself does not interact with the client; it only confirms
that we have the object and sets a few flags. Note that unlike v0, v2
does not ever (before or after this patch) check the return code of
got_oid(), which lets the caller know whether we have the object. But
again, that makes sense; v0 is using it to asynchronously tell the
client to stop sending. In v2's synchronous protocol, we just discard
those entries (and decide how to ACK at the end of each round).
There is one slight tweak we need, though. In v2's state machine, we
reach the SEND_ACKS state if the other side sent us any "have" lines,
whether they were useful or not. Right now we do that by checking
whether the "have" array had any entries, but if we record only the
useful ones, that doesn't work. Instead, we can add a simple boolean
that tells us whether we saw any have line (even if it was useless).
This lets us drop the "haves" array entirely, as we're now placing
objects directly into the "have_obj" object array (which is where
got_oid() put them in the long run anyway). And as a bonus, we can drop
the secondary "common" array used in process_haves_and_send_acks(). It
was essentially a copy of "haves" minus the objects we do not have. But
now that we are using "have_obj" directly, we know everything in it is
useful. So in addition to protecting ourselves against malicious input,
we should slightly lower our memory usage for normal inputs.
Note that there is one user-visible effect. The trace2 output records
the number of "haves". Previously this was the total number of "have"
lines we saw, but now is the number of useful ones. We could retain the
original meaning by keeping a separate counter, but it doesn't seem
worth the effort; this trace info is for debugging and metrics, and
arguably the count of common oids is at least as useful as the total
count.
Reported-by: Benjamin Flesch <benjaminflesch@icloud.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 583b7ea31b (upload-pack/fetch-pack: support side-band
communication, 2006-06-21) the abort message sent by upload-pack in
case of possible repository corruption ends with a null character.
This can be seen in several test cases in 't5530-upload-pack-error.sh'
where 'grep <pattern> output.err' often reports "Binary file
output.err matches" because of that null character.
The reason for this is that the abort message is defined as a string
literal, and we pass its size to the send function as
sizeof(abort_msg), which also counts the terminating null character.
Use strlen() instead to avoid sending that terminating null character.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Each of these were checked with
gcc -E -I. ${SOURCE_FILE} | grep ${HEADER_FILE}
to ensure that removing the direct inclusion of the header actually
resulted in that header no longer being included at all (i.e. that
no other header pulled it in transitively).
...except for a few cases where we verified that although the header
was brought in transitively, nothing from it was directly used in
that source file. These cases were:
* builtin/credential-cache.c
* builtin/pull.c
* builtin/send-pack.c
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Information on how users are accessing hosted repositories can be
helpful to server operators. For example, being able to broadly
differentiate between fetches and initial clones; the use of shallow
repository features; or partial clone filters.
a29263c (fetch-pack: add tracing for negotiation rounds, 2022-08-02)
added some information on have counts to fetch-pack itself to help
diagnose negotiation; but from a git-upload-pack (server) perspective,
there's no means of accessing such information without using
GIT_TRACE_PACKET to examine the protocol packets.
Improve this by emitting a Trace2 JSON event from upload-pack with
summary information on the contents of a fetch request.
* haves, wants, and want-ref counts can help determine (broadly) between
fetches and clones, and the use of single-branch, etc.
* shallow clone depth, tip counts, and deepening options.
* any partial clone filter type.
Signed-off-by: Robert Coup <robert@coup.net.nz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 7ba7c52d76 (upload-pack: fix race condition in error messages,
2023-08-10), we have fixed a race in t5516-fetch-push.sh where sometimes
error messages got intermingled. This was done by splitting up the call
to `die()` such that we print the error message before writing to the
remote side, followed by a call to `exit(1)` afterwards.
This causes a subtle regression though as `die()` causes us to exit with
exit code 128, whereas we now call `exit(1)`. It's not really clear
whether we want to guarantee any specific error code in this case, and
neither do we document anything like that. But on the other hand, it
seems rather clear that this is an unintended side effect of the change
given that this change in behaviour was not mentioned at all.
Restore the status-quo by exiting with 128. The test in t5703 to
ensure that "git fetch" fails by using test_must_fail, which does
not care between exiting 1 and 128, so this changes will not affect
any test.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test t5516-fetch-push.sh has a test 'deny fetch unreachable SHA1,
allowtipsha1inwant=true' that checks stderr for a specific error
string from the remote. In some build environments the error sent
over the remote connection gets mingled with the error from the
die() statement. Since both signals are being output to the same
file descriptor (but from parent and child processes), the output
we are matching with grep gets split.
To reduce the risk of this failure, follow this process instead:
1. Write an error message to stderr.
2. Write an error message across the connection.
3. exit(1).
This reorders the events so the error is written entirely before
the client receives a message from the remote, removing the race
condition.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enumerating refs in the packed-refs file, while excluding refs that
match certain patterns, has been optimized.
* tb/refs-exclusion-and-packed-refs:
ls-refs.c: avoid enumerating hidden refs where possible
upload-pack.c: avoid enumerating hidden refs where possible
builtin/receive-pack.c: avoid enumerating hidden references
refs.h: implement `hidden_refs_to_excludes()`
refs.h: let `for_each_namespaced_ref()` take excluded patterns
revision.h: store hidden refs in a `strvec`
refs/packed-backend.c: add trace2 counters for jump list
refs/packed-backend.c: implement jump lists to avoid excluded pattern(s)
refs/packed-backend.c: refactor `find_reference_location()`
refs: plumb `exclude_patterns` argument throughout
builtin/for-each-ref.c: add `--exclude` option
ref-filter.c: parameterize match functions over patterns
ref-filter: add `ref_filter_clear()`
ref-filter: clear reachable list pointers after freeing
ref-filter.h: provide `REF_FILTER_INIT`
refs.c: rename `ref_filter`
Further shuffling of declarations across header files to streamline
file dependencies.
* cw/compat-util-header-cleanup:
git-compat-util: move alloc macros to git-compat-util.h
treewide: remove unnecessary includes for wrapper.h
kwset: move translation table from ctype
sane-ctype.h: create header for sane-ctype macros
git-compat-util: move wrapper.c funcs to its header
git-compat-util: move strbuf.c funcs to its header
In a similar fashion as a previous commit, teach `upload-pack` to avoid
enumerating hidden references where possible.
Note, however, that there are certain cases where cannot avoid
enumerating even hidden references, in particular when either of:
- `uploadpack.allowTipSHA1InWant`, or
- `uploadpack.allowReachableSHA1InWant`
are set, corresponding to `ALLOW_TIP_SHA1` and `ALLOW_REACHABLE_SHA1`,
respectively.
When either of these bits are set, upload-pack's `is_our_ref()` function
needs to consider the `HIDDEN_REF` bit of the referent's object flags.
So we must visit all references, including the hidden ones, in order to
mark their referents with the `HIDDEN_REF` bit.
When neither `ALLOW_TIP_SHA1` nor `ALLOW_REACHABLE_SHA1` are set, the
`is_our_ref()` function considers only the `OUR_REF` bit, and not the
`HIDDEN_REF` one. `OUR_REF` is applied via `mark_our_ref()`, and only
to objects at the tips of non-hidden references, so we do not need to
visit hidden references in this case.
When neither of those bits are set, `upload-pack` can potentially avoid
enumerating a large number of references. In the same example as a
previous commit (linux.git with one hidden reference per commit,
"refs/pull/N"):
$ printf 0000 >in
$ hyperfine --warmup=1 \
'git -c transfer.hideRefs=refs/pull upload-pack . <in' \
'git.compile -c transfer.hideRefs=refs/pull -c uploadpack.allowTipSHA1InWant upload-pack . <in' \
'git.compile -c transfer.hideRefs=refs/pull upload-pack . <in'
Benchmark 1: git -c transfer.hideRefs=refs/pull upload-pack . <in
Time (mean ± σ): 406.9 ms ± 1.1 ms [User: 357.3 ms, System: 49.5 ms]
Range (min … max): 405.7 ms … 409.2 ms 10 runs
Benchmark 2: git.compile -c transfer.hideRefs=refs/pull -c uploadpack.allowTipSHA1InWant upload-pack . <in
Time (mean ± σ): 406.5 ms ± 1.3 ms [User: 356.5 ms, System: 49.9 ms]
Range (min … max): 404.6 ms … 408.8 ms 10 runs
Benchmark 3: git.compile -c transfer.hideRefs=refs/pull upload-pack . <in
Time (mean ± σ): 4.7 ms ± 0.2 ms [User: 0.7 ms, System: 3.9 ms]
Range (min … max): 4.3 ms … 6.1 ms 472 runs
Summary
'git.compile -c transfer.hideRefs=refs/pull upload-pack . <in' ran
86.62 ± 4.33 times faster than 'git.compile -c transfer.hideRefs=refs/pull -c uploadpack.allowTipSHA1InWant upload-pack . <in'
86.70 ± 4.33 times faster than 'git -c transfer.hideRefs=refs/pull upload-pack . <in'
As above, we must visit every reference when
uploadPack.allowTipSHA1InWant is set. But when it is unset, we can visit
far fewer references.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A future commit will want to call `for_each_namespaced_ref()` with
a list of excluded patterns.
We could introduce a variant of that function, say,
`for_each_namespaced_ref_exclude()` which takes the extra parameter, and
reimplement the original function in terms of that. But all but one
caller (in `http-backend.c`) will supply the new parameter, so add the
new parameter to `for_each_namespaced_ref()` itself instead of
introducing a new function.
For now, supply NULL for the list of excluded patterns at all callers to
avoid changing behavior, which we will do in a future change.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In subsequent commits, it will be convenient to have a 'const char **'
of hidden refs (matching `transfer.hiderefs`, `uploadpack.hideRefs`,
etc.), instead of a `string_list`.
Convert spots throughout the tree that store the list of hidden refs
from a `string_list` to a `strvec`.
Note that in `parse_hide_refs_config()` there is an ugly const-cast used
to avoid an extra copy of each value before trimming any trailing slash
characters. This could instead be written as:
ref = xstrdup(value);
len = strlen(ref);
while (len && ref[len - 1] == '/')
ref[--len] = '\0';
strvec_push(hide_refs, ref);
free(ref);
but the double-copy (once when calling `xstrdup()`, and another via
`strvec_push()`) is wasteful.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reduce reliance on a global state in the config reading API.
* gc/config-context:
config: pass source to config_parser_event_fn_t
config: add kvi.path, use it to evaluate includes
config.c: remove config_reader from configsets
config: pass kvi to die_bad_number()
trace2: plumb config kvi
config.c: pass ctx with CLI config
config: pass ctx with config files
config.c: pass ctx in configsets
config: add ctx arg to config_fn_t
urlmatch.h: use config_fn_t type
config: inline git_color_default_config
Plumb "struct key_value_info" through all code paths that end in
die_bad_number(), which lets us remove the helper functions that read
analogous values from "struct config_reader". As a result, nothing reads
config_reader.config_kvi any more, so remove that too.
In config.c, this requires changing the signature of
git_configset_get_value() to 'return' "kvi" in an out parameter so that
git_configset_get_<type>() can pass it to git_config_<type>(). Only
numeric types will use "kvi", so for non-numeric types (e.g.
git_configset_get_string()), pass NULL to indicate that the out
parameter isn't needed.
Outside of config.c, config callbacks now need to pass "ctx->kvi" to any
of the git_config_<type>() functions that parse a config string into a
number type. Included is a .cocci patch to make that refactor.
The only exceptional case is builtin/config.c, where git_config_<type>()
is called outside of a config callback (namely, on user-provided input),
so config source information has never been available. In this case,
die_bad_number() defaults to a generic, but perfectly descriptive
message. Let's provide a safe, non-NULL for "kvi" anyway, but make sure
not to change the message.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new "const struct config_context *ctx" arg to config_fn_t to hold
additional information about the config iteration operation.
config_context has a "struct key_value_info kvi" member that holds
metadata about the config source being read (e.g. what kind of config
source it is, the filename, etc). In this series, we're only interested
in .kvi, so we could have just used "struct key_value_info" as an arg,
but config_context makes it possible to add/adjust members in the future
without changing the config_fn_t signature. We could also consider other
ways of organizing the args (e.g. moving the config name and value into
config_context or key_value_info), but in my experiments, the
incremental benefit doesn't justify the added complexity (e.g. a
config_fn_t will sometimes invoke another config_fn_t but with a
different config value).
In subsequent commits, the .kvi member will replace the global "struct
config_reader" in config.c, making config iteration a global-free
operation. It requires much more work for the machinery to provide
meaningful values of .kvi, so for now, merely change the signature and
call sites, pass NULL as a placeholder value, and don't rely on the arg
in any meaningful way.
Most of the changes are performed by
contrib/coccinelle/config_fn_ctx.pending.cocci, which, for every
config_fn_t:
- Modifies the signature to accept "const struct config_context *ctx"
- Passes "ctx" to any inner config_fn_t, if needed
- Adds UNUSED attributes to "ctx", if needed
Most config_fn_t instances are easily identified by seeing if they are
called by the various config functions. Most of the remaining ones are
manually named in the .cocci patch. Manual cleanups are still needed,
but the majority of it is trivial; it's either adjusting config_fn_t
that the .cocci patch didn't catch, or adding forward declarations of
"struct config_context ctx" to make the signatures make sense.
The non-trivial changes are in cases where we are invoking a config_fn_t
outside of config machinery, and we now need to decide what value of
"ctx" to pass. These cases are:
- trace2/tr2_cfg.c:tr2_cfg_set_fl()
This is indirectly called by git_config_set() so that the trace2
machinery can notice the new config values and update its settings
using the tr2 config parsing function, i.e. tr2_cfg_cb().
- builtin/checkout.c:checkout_main()
This calls git_xmerge_config() as a shorthand for parsing a CLI arg.
This might be worth refactoring away in the future, since
git_xmerge_config() can call git_default_config(), which can do much
more than just parsing.
Handle them by creating a KVI_INIT macro that initializes "struct
key_value_info" to a reasonable default, and use that to construct the
"ctx" arg.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The vast majority of files including object-store.h did not need dir.h
nor khash.h. Split the header into two files, and let most just depend
upon object-store-ll.h, while letting the two callers that need it
depend on the full object-store.h.
After this patch:
$ git grep -h include..object-store | sort | uniq -c
2 #include "object-store.h"
129 #include "object-store-ll.h"
Diff best viewed with `--color-moved`.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cloning an empty repository, protocol versions 0 and 1 currently
offer nothing but the header and flush packets for the /info/refs
endpoint. This means that no capabilities are provided, so the client
side doesn't know what capabilities are present.
However, this does pose a problem when working with SHA-256
repositories, since we use the capabilities to know the remote side's
object format (hash algorithm). As of 8b214c2e9d ("clone: propagate
object-format when cloning from void", 2023-04-05), this has been fixed
for protocol v2, since there we always read the hash algorithm from the
remote.
Fortunately, the push version of the protocol already indicates a clue
for how to solve this. When the /info/refs endpoint is accessed for a
push and the remote is empty, we include a dummy "capabilities^{}" ref
pointing to the all-zeros object ID. The protocol documentation already
indicates this should _always_ be sent, even for fetches and clones, so
let's just do that, which means we'll properly announce the hash
algorithm as part of the capabilities. This just works with the
existing code because we share the same ref code for fetches and clones,
and libgit2, JGit, and dulwich do as well.
There is one minor issue to fix, though. If we called send_ref with
namespaces, we would return NULL with the capabilities entry, which
would cause a crash. Instead, let's refactor out a function to print
just the ref itself without stripping the namespace and use it for our
special capabilities entry.
Add several sets of tests for HTTP as well as for local clones. The
behavior can be slightly different for HTTP versus a local or SSH clone
because of the stateless-rpc functionality, so it's worth testing both.
Signed-off-by: brian m. carlson <bk2204@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to parse capability list for v0 on-wire protocol fell into
an infinite loop when a capability appears multiple times, which
has been corrected.
* jk/protocol-cap-parse-fix:
v0 protocol: use size_t for capability length/offset
t5512: test "ls-remote --heads --symref" filtering with v0 and v2
t5512: allow any protocol version for filtered symref test
t5512: add v2 support for "ls-remote --symref" test
v0 protocol: fix sha1/sha256 confusion for capabilities^{}
t5512: stop referring to "v1" protocol
v0 protocol: fix infinite loop when parsing multi-valued capabilities
When parsing server capabilities, we use "int" to store lengths and
offsets. At first glance this seems like a spot where our parser may be
confused by integer overflow if somebody sent us a malicious response.
In practice these strings are all bounded by the 64k limit of a
pkt-line, so using "int" is OK. However, it makes the code simpler to
audit if they just use size_t everywhere. Note that because we take
these parameters as pointers, this also forces many callers to update
their declared types.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cache.h's nature of a dumping ground of includes prevented it from
being included in some compat/ files, forcing us into a workaround
of having a double forward declaration of the read_in_full() function
(see commit 14086b0a13 ("compat/pread.c: Add a forward declaration to
fix a warning", 2007-11-17)). Now that we have moved functions like
read_in_full() from cache.h to wrapper.h, and wrapper.h isn't littered
with unrelated and scary #defines, get rid of the extra forward
declaration and just have compat/pread.c include wrapper.h.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Several files were including cache.h solely to get other headers, such
as trace.h and trace2.h. Since the last few commits have modified
files to make these dependencies more explicit, the inclusion of cache.h
is no longer needed in several cases. Remove it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dozens of files made use of trace and trace2 functions, without
explicitly including trace.h or trace2.h. This made it more difficult
to find which files could remove a dependence on cache.h. Make C files
explicitly include trace.h or trace2.h if they are using them.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split key function and data structure definitions out of cache.h to
new header files and adjust the users.
* en/header-split-cleanup:
csum-file.h: remove unnecessary inclusion of cache.h
write-or-die.h: move declarations for write-or-die.c functions from cache.h
treewide: remove cache.h inclusion due to setup.h changes
setup.h: move declarations for setup.c functions from cache.h
treewide: remove cache.h inclusion due to environment.h changes
environment.h: move declarations for environment.c functions from cache.h
treewide: remove unnecessary includes of cache.h
wrapper.h: move declarations for wrapper.c functions from cache.h
path.h: move function declarations for path.c functions from cache.h
cache.h: remove expand_user_path()
abspath.h: move absolute path functions from cache.h
environment: move comment_line_char from cache.h
treewide: remove unnecessary cache.h inclusion from several sources
treewide: remove unnecessary inclusion of gettext.h
treewide: be explicit about dependence on gettext.h
treewide: remove unnecessary cache.h inclusion from a few headers
Code clean-up around the use of the_repository.
* ab/remove-implicit-use-of-the-repository:
libs: use "struct repository *" argument, not "the_repository"
post-cocci: adjust comments for recent repo_* migration
cocci: apply the "revision.h" part of "the_repository.pending"
cocci: apply the "rerere.h" part of "the_repository.pending"
cocci: apply the "refs.h" part of "the_repository.pending"
cocci: apply the "promisor-remote.h" part of "the_repository.pending"
cocci: apply the "packfile.h" part of "the_repository.pending"
cocci: apply the "pretty.h" part of "the_repository.pending"
cocci: apply the "object-store.h" part of "the_repository.pending"
cocci: apply the "diff.h" part of "the_repository.pending"
cocci: apply the "commit.h" part of "the_repository.pending"
cocci: apply the "commit-reach.h" part of "the_repository.pending"
cocci: apply the "cache.h" part of "the_repository.pending"
cocci: add missing "the_repository" macros to "pending"
cocci: sort "the_repository" rules by header
cocci: fix incorrect & verbose "the_repository" rules
cocci: remove dead rule from "the_repository.pending.cocci"
* ab/remove-implicit-use-of-the-repository:
libs: use "struct repository *" argument, not "the_repository"
post-cocci: adjust comments for recent repo_* migration
cocci: apply the "revision.h" part of "the_repository.pending"
cocci: apply the "rerere.h" part of "the_repository.pending"
cocci: apply the "refs.h" part of "the_repository.pending"
cocci: apply the "promisor-remote.h" part of "the_repository.pending"
cocci: apply the "packfile.h" part of "the_repository.pending"
cocci: apply the "pretty.h" part of "the_repository.pending"
cocci: apply the "object-store.h" part of "the_repository.pending"
cocci: apply the "diff.h" part of "the_repository.pending"
cocci: apply the "commit.h" part of "the_repository.pending"
cocci: apply the "commit-reach.h" part of "the_repository.pending"
cocci: apply the "cache.h" part of "the_repository.pending"
cocci: add missing "the_repository" macros to "pending"
cocci: sort "the_repository" rules by header
cocci: fix incorrect & verbose "the_repository" rules
cocci: remove dead rule from "the_repository.pending.cocci"
Apply the part of "the_repository.pending.cocci" pertaining to
"object-store.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dozens of files made use of gettext functions, without explicitly
including gettext.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
gettext.h if they are using it.
However, while compat/fsmonitor/fsm-ipc-darwin.c should also gain an
include of gettext.h, it was left out to avoid conflicting with an
in-flight topic.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
More work towards -Wunused.
* jk/unused-post-2.39-part2: (21 commits)
help: mark unused parameter in git_unknown_cmd_config()
run_processes_parallel: mark unused callback parameters
userformat_want_item(): mark unused parameter
for_each_commit_graft(): mark unused callback parameter
rewrite_parents(): mark unused callback parameter
fetch-pack: mark unused parameter in callback function
notes: mark unused callback parameters
prio-queue: mark unused parameters in comparison functions
for_each_object: mark unused callback parameters
list-objects: mark unused callback parameters
mark unused parameters in signal handlers
run-command: mark error routine parameters as unused
mark "pointless" data pointers in callbacks
ref-filter: mark unused callback parameters
http-backend: mark unused parameters in virtual functions
http-backend: mark argc/argv unused
object-name: mark unused parameters in disambiguate callbacks
serve: mark unused parameters in virtual functions
serve: use repository pointer to get config
ls-refs: drop config caching
...
Each v2 "serve" action has a virtual function for advertising and
implementing the command. A few of these are so trivial that they don't
need to look at their parameters, especially the "repository" parameter.
We can mark them so that -Wunused-parameter doesn't complain.
Note that upload_pack_v2() probably _should_ be using its repository
pointer. But teaching the functions it calls to do so is non-trivial.
Even using it for something as simple as reading config is tricky, both
because it shares code with the v1 upload pack, and because the
git_protected_config() mechanism it uses does not have a repo-specific
interface. So we'll just annotate it for now, and cleaning it up can be
part of the larger work to drop references to the_repository.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few of the v2 "serve" callbacks ignore their repository parameter and
read config using the_repository (either directly or implicitly by
calling wrapper functions). This isn't a bug since the server code only
handles a single main repository anyway (and indeed, if you look at the
callers, these repository parameters will always be the_repository). But
in the long run we want to get rid of the_repository, so let's take a
tiny step in that direction.
As a bonus, this silences some -Wunused-parameter warnings.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We're about to add a new argument to git-rev-list(1) that allows it to
add all references that are visible when taking `transfer.hideRefs` et
al into account. This will require us to potentially parse multiple sets
of hidden refs, which is not easily possible right now as there is only
a single, global instance of the list of parsed hidden refs.
Refactor `parse_hide_refs_config()` and `ref_is_hidden()` so that both
take the list of hidden references as input and adjust callers to keep a
local list, instead. This allows us to easily use multiple hidden-ref
lists. Furthermore, it allows us to properly free this list before we
exit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
A couple of bugfixes with code clean-up.
* jk/list-objects-filter-cleanup:
list-objects-filter: convert filter_spec to a strbuf
list-objects-filter: add and use initializers
list-objects-filter: handle null default filter spec
list-objects-filter: don't memset after releasing filter struct
